SALOME_CONFIGURE_FILE(conf.py.in conf.py)
-SET(HTML_ROOT_FILE html/index.html)
-
-ADD_CUSTOM_COMMAND(OUTPUT ${HTML_ROOT_FILE}
+ADD_CUSTOM_TARGET(BUILD_HTML ALL
COMMAND ${CMAKE_COMMAND} -E make_directory html
COMMAND ${CMAKE_COMMAND} -E make_directory doctrees
COMMAND ${SPHINX_EXECUTABLE} -c ${CMAKE_BINARY_DIR}/doc/salome/tutorial -b html ${ALLSPHINXOPTS} html
DEPENDS ${RSTFILES}
WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
)
-
-SET(PDF_ROOT_FILE latex/Makefile)
-
-ADD_CUSTOM_COMMAND(OUTPUT ${PDF_ROOT_FILE}
- COMMAND ${CMAKE_COMMAND} -E make_directory latex
- COMMAND ${SPHINX_EXECUTABLE} -c ${CMAKE_BINARY_DIR}/doc/salome/tutorial -b latex ${ALLSPHINXOPTS} latex
- COMMAND make -C latex all-pdf
- DEPENDS ${RSTFILES}
- WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-)
-
-ADD_CUSTOM_TARGET(BUILD_HTML ALL DEPENDS ${PDF_ROOT_FILE} ${HTML_ROOT_FILE})
+
+# ADD_CUSTOM_TARGET(BUILD_PDF ALL
+# COMMAND ${CMAKE_COMMAND} -E make_directory latex
+# COMMAND ${SPHINX_EXECUTABLE} -c ${CMAKE_BINARY_DIR}/doc/salome/tutorial -b latex ${ALLSPHINXOPTS} latex
+# COMMAND make -C latex all-pdf
+# DEPENDS ${RSTFILES}
+# WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+# )
INSTALL(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/html/
DESTINATION ${SALOME_INSTALL_DOC}/gui/HYDRO_tutorial
# Add any Sphinx extension module names here, as strings. They can be extensions
# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
#extensions = ['sphinx.ext.extlinks']
+extensions = ['sphinx.ext.viewcode','sphinx.ext.pngmath']
# Add any paths that contain templates here, relative to this directory.
#templates_path = ['_templates']
# General information about the project.
project = u'HYDRO module'
-copyright = u'2012-2013, EDF'
+copyright = u'2015-2016, EDF'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
-version = '@SALOMEHYDRO_VERSION@'
+#version = '@SALOMEHYDRO_VERSION@'
+version = 'V7_6'
# The full version, including alpha/beta/rc tags.
-release = '@SALOMEHYDRO_VERSION@'
+#release = '@SALOMEHYDRO_VERSION@'
+release = 'V7_6-2015.12.18'
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
# -- Options for LaTeX output --------------------------------------------------
+latex_elements = {
# The paper size ('letter' or 'a4').
-#latex_paper_size = 'letter'
+#latex_paper_size = 'a4'
+'papersize': 'a4paper',
# The font size ('10pt', '11pt' or '12pt').
#latex_font_size = '10pt'
+# Latex figure (float) alignment
+'figure_align': 'htbp',
+}
+
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title, author, documentclass [howto/manual]).
-#latex_documents = [
-# ('index', 'HYDROmodule.tex', u'HYDRO module Documentation',
-# u'EDF R&D', 'manual'),
-#]
+latex_documents = [
+ ('index', 'HYDROmodule.tex', u'HYDRO module Documentation',
+ u'EDF RD', 'manual'),
+]
# The name of an image file (relative to this directory) to place at the top of
# the title page.
# Additional stuff for the LaTeX preamble.
#latex_preamble = ''
+latex_preamble = """\usepackage{pdfpages}
+\setcounter{tocdepth}{2}"""
# Documents to append as an appendix to all manuals.
#latex_appendices = []
La constitution du champ d'altitude se fait au moyen d'un script Python, qu'il faut editer, puis exécuter.
-Voici le script::
+Voici le script :
+
+::
# -*- coding: utf-8 -*-
--- /dev/null
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS =
+SPHINXBUILD = sphinx-build
+PAPER =
+BUILDDIR = build
+
+# Internal variables.
+PAPEROPT_a4 = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees -c . $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) ..
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) ..
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+ @echo "Please use \`make <target>' where <target> is one of"
+ @echo " html to make standalone HTML files"
+ @echo " dirhtml to make HTML files named index.html in directories"
+ @echo " singlehtml to make a single large HTML file"
+ @echo " pickle to make pickle files"
+ @echo " json to make JSON files"
+ @echo " htmlhelp to make HTML files and a HTML help project"
+ @echo " qthelp to make HTML files and a qthelp project"
+ @echo " devhelp to make HTML files and a Devhelp project"
+ @echo " epub to make an epub"
+ @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+ @echo " latexpdf to make LaTeX files and run them through pdflatex"
+ @echo " text to make text files"
+ @echo " man to make manual pages"
+ @echo " texinfo to make Texinfo files"
+ @echo " info to make Texinfo files and run them through makeinfo"
+ @echo " gettext to make PO message catalogs"
+ @echo " changes to make an overview of all changed/added/deprecated items"
+ @echo " linkcheck to check all external links for integrity"
+ @echo " doctest to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+ -rm -rf $(BUILDDIR)/*
+
+html:
+ $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+ @echo
+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+ $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+ @echo
+ @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+ $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+ @echo
+ @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+ $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+ @echo
+ @echo "Build finished; now you can process the pickle files."
+
+json:
+ $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+ @echo
+ @echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+ $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+ @echo
+ @echo "Build finished; now you can run HTML Help Workshop with the" \
+ ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+ $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+ @echo
+ @echo "Build finished; now you can run "qcollectiongenerator" with the" \
+ ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+ @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Formation_1.qhcp"
+ @echo "To view the help file:"
+ @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Formation_1.qhc"
+
+devhelp:
+ $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+ @echo
+ @echo "Build finished."
+ @echo "To view the help file:"
+ @echo "# mkdir -p $$HOME/.local/share/devhelp/Formation_1"
+ @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Formation_1"
+ @echo "# devhelp"
+
+epub:
+ $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+ @echo
+ @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+ @echo
+ @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+ @echo "Run \`make' in that directory to run these through (pdf)latex" \
+ "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+ $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+ @echo "Running LaTeX files through pdflatex..."
+ $(MAKE) -C $(BUILDDIR)/latex all-pdf
+ @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+ $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+ @echo
+ @echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+ $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+ @echo
+ @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+ @echo
+ @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+ @echo "Run \`make' in that directory to run these through makeinfo" \
+ "(use \`make info' here to do that automatically)."
+
+info:
+ $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+ @echo "Running Texinfo files through makeinfo..."
+ make -C $(BUILDDIR)/texinfo info
+ @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+ $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+ @echo
+ @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+ $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+ @echo
+ @echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+ $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+ @echo
+ @echo "Link check complete; look for any errors in the above output " \
+ "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+ $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+ @echo "Testing of doctests in the sources finished, look at the " \
+ "results in $(BUILDDIR)/doctest/output.txt."
--- /dev/null
+# -*- coding: utf-8 -*-
+#
+# Formation SALOME Module 1 documentation build configuration file, created by
+# sphinx-quickstart on Fri Jul 25 14:29:29 2014.
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys, os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = ['sphinx.ext.viewcode','sphinx.ext.pngmath']#,'sphinx.ext.graphviz']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'module HYDRO'
+copyright = u'2015-2016, EDF'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = 'V7_6'
+# The full version, including alpha/beta/rc tags.
+release = 'V7_6-2015.12.18'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+language = 'fr'
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['_build']
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages. See the documentation for
+# a list of builtin themes.
+html_theme = 'default'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further. For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents. If None, it defaults to
+# "<project> v<release> documentation".
+html_title = project
+
+# A shorter title for the navigation bar. Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['../_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+html_use_index = False
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+html_show_sourcelink = False
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+html_show_sphinx = False
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it. The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'module_HYDRO_V76'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+'papersize': 'a4paper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#latex_preamble = '',
+
+# Latex figure (float) alignment
+'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+ ('index', 'moduleHYDRO_V76.tex', project,
+ u'EDF', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = "../_static/Icone_Salome.png"
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = True
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Additional stuff for the LaTeX preamble.
+latex_preamble = """\usepackage{pdfpages}
+\setcounter{tocdepth}{2}"""
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
Avec trois points, on peut faire une transformation affine de l'iamge, si celle-ci n'est pas correctement orientée.
* Disposer des données de bathy au format ascii.
+
Pour l’instant ces fichiers doivent porter l’extension .xyz (3 colonnes x,y,z) ou .asc (renvoi aux formats)
Import d'images
