SketchLine_1 = Sketch_1.addLine(50, 70, 50, 9.237604307034024)
SketchLine_1.setName("SketchLine_10")
SketchLine_1.result().setName("SketchLine_10")
-SketchLine_2 = Sketch_1.addLine(42, -4.618802153516998, -53.92304845413265, -59.99999999999996)
+SketchLine_2 = Sketch_1.addLine(42, -4.618802153516998, -53.92304845413265, -60)
SketchLine_2.setName("SketchLine_11")
SketchLine_2.result().setName("SketchLine_11")
SketchLine_3 = Sketch_1.addLine(50, 70, 50, 0)
SketchLine_3.setName("SketchLine_1")
SketchLine_3.result().setName("SketchLine_1")
SketchLine_3.setAuxiliary(True)
-SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -59.99999999999996)
+SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -60)
SketchLine_4.setName("SketchLine_2")
SketchLine_4.result().setName("SketchLine_2")
SketchLine_4.setAuxiliary(True)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(44, 9.237604307034019, 44, 70)
+SketchLine_5 = Sketch_1.addLine(44, 9.237604307034037, 44, 70)
SketchLine_5.setName("SketchLine_8")
SketchLine_5.result().setName("SketchLine_8")
-SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -59.99999999999996, -56.92304845413265, -54.80384757729332)
+SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -60, -56.92304845413265, -54.80384757729332)
SketchLine_6.setName("SketchLine_3")
SketchLine_6.result().setName("SketchLine_3")
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 38.99999999999999, 0.5773502691896226)
+SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39, 0.5773502691896394)
SketchLine_7.setName("SketchLine_9")
SketchLine_7.result().setName("SketchLine_9")
-SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137744)
+SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137764)
SketchLine_8.setName("SketchLine_4")
SketchLine_8.result().setName("SketchLine_4")
SketchLine_8.setAuxiliary(True)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
-SketchLine_9 = Sketch_1.addLine(44, 3.464101615137744, 44, 70)
+SketchLine_9 = Sketch_1.addLine(44, 3.464101615137764, 44, 70)
SketchLine_9.setName("SketchLine_5")
SketchLine_9.result().setName("SketchLine_5")
SketchLine_9.setAuxiliary(True)
SketchLine_11.setName("SketchLine_7")
SketchLine_11.result().setName("SketchLine_7")
SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50, False)
-SketchArc_1 = Sketch_1.addArc(34, 9.237604307034017, 38.99999999999999, 0.5773502691896226, 44, 9.237604307034019, False)
+SketchArc_1 = Sketch_1.addArc(34, 9.237604307034037, 39, 0.5773502691896394, 44, 9.237604307034037, False)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
-SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
-SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_2.addCircle(0, 0, 17.5)
SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_1.result())
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], 17.5)
-SketchConstraintRadius_3.setName("SketchConstraintRadius_1")
SketchCircle_2 = Sketch_2.addCircle(0, 0, 14.5)
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_2.results()[1], 14.5)
-SketchConstraintRadius_4.setName("SketchConstraintRadius_2")
model.do()
Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
SketchLine_13 = Sketch_3.addLine(-22, 70, -22, -35.79571668975675)
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
-SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674)
+SketchLine_20 = Sketch_4.addLine(-4, 38, -4, 21.26617031813674)
SketchLine_20.setName("SketchLine_36")
SketchLine_20.result().setName("SketchLine_36")
SketchArc_3 = Sketch_4.addArc(0, 0, -8.5, 15.2970585407786, -7.446808510638298, 15.83650981137842, True)
SketchArc_4.setName("SketchArc_8")
SketchArc_4.result().setName("SketchArc_8")
SketchArc_4.results()[1].setName("SketchArc_8_2")
-SketchLine_21 = Sketch_4.addLine(4, 21.26617031813674, 4, 37.99999998819019)
+SketchLine_21 = Sketch_4.addLine(4, 21.26617031813674, 4, 38)
SketchLine_21.setName("SketchLine_38")
SketchLine_21.result().setName("SketchLine_38")
-SketchLine_22 = Sketch_4.addLine(-8.5, 15.2970585407786, -8.499999999999998, 12)
+SketchLine_22 = Sketch_4.addLine(-8.5, 15.2970585407786, -8.5, 12)
SketchLine_22.setName("SketchLine_22")
SketchLine_22.result().setName("SketchLine_22")
-SketchLine_23 = Sketch_4.addLine(-10.1, 44.00000000000001, -9.999999999999854, 44.00000000000001)
+SketchLine_23 = Sketch_4.addLine(-10.1, 44, -10, 44)
SketchLine_23.setName("SketchLine_37")
SketchLine_23.result().setName("SketchLine_37")
-SketchLine_24 = Sketch_4.addLine(9.99999999990029, 43.99999998819102, 10.1, 44)
+SketchLine_24 = Sketch_4.addLine(10, 44, 10.1, 44)
SketchLine_24.setName("SketchLine_39")
SketchLine_24.result().setName("SketchLine_39")
SketchLine_25 = Sketch_4.addLine(8.5, 12, 8.5, 15.29705854077835)
SketchLine_25.setName("SketchLine_24")
SketchLine_25.result().setName("SketchLine_24")
-SketchLine_26 = Sketch_4.addLine(4, 44.00000000000001, 10.1, 44)
+SketchLine_26 = Sketch_4.addLine(4, 44, 10.1, 44)
SketchLine_26.setName("SketchLine_26")
SketchLine_26.result().setName("SketchLine_26")
SketchLine_26.setAuxiliary(True)
-SketchLine_27 = Sketch_4.addLine(4, 17.03672503740084, 4, 44.00000000000001)
+SketchLine_27 = Sketch_4.addLine(4, 17.03672503740084, 4, 44)
SketchLine_27.setName("SketchLine_27")
SketchLine_27.result().setName("SketchLine_27")
SketchLine_27.setAuxiliary(True)
SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_26.startPoint())
-SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
-SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45.00000000000001)
+SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45)
SketchLine_28.setName("SketchLine_28")
SketchLine_28.result().setName("SketchLine_28")
SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_28.startPoint())
-SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
-SketchLine_29 = Sketch_4.addLine(10.1, 45.00000000000001, -10.1, 45)
+SketchLine_29 = Sketch_4.addLine(10.1, 45, -10.1, 45)
SketchLine_29.setName("SketchLine_29")
SketchLine_29.result().setName("SketchLine_29")
SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
-SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
-SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44.00000000000001)
+SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44)
SketchLine_30.setName("SketchLine_30")
SketchLine_30.result().setName("SketchLine_30")
SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
-SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_36")
-SketchLine_31 = Sketch_4.addLine(-10.1, 44.00000000000001, -4, 44.00000000000001)
+SketchLine_31 = Sketch_4.addLine(-10.1, 44, -4, 44)
SketchLine_31.setName("SketchLine_31")
SketchLine_31.result().setName("SketchLine_31")
SketchLine_31.setAuxiliary(True)
SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
-SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_37")
-SketchLine_32 = Sketch_4.addLine(-4, 44.00000000000001, -4.000000000000001, 17.03672503740078)
+SketchLine_32 = Sketch_4.addLine(-4, 44, -4, 17.03672503740078)
SketchLine_32.setName("SketchLine_20")
SketchLine_32.result().setName("SketchLine_20")
SketchLine_32.setAuxiliary(True)
SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_31.endPoint())
-SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_38")
SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_32.result())
SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_27.result())
SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_29.result())
SketchLine_33.setName("SketchLine_32")
SketchLine_33.result().setName("SketchLine_32")
SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5, False)
-SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
-SketchLine_34 = Sketch_4.addLine(-8.499999999999998, 12, 8.5, 12)
+SketchLine_34 = Sketch_4.addLine(-8.5, 12, 8.5, 12)
SketchLine_34.setName("SketchLine_33")
SketchLine_34.result().setName("SketchLine_33")
SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_34.startPoint())
-SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_39")
SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_34.result())
SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
-SketchArc_5 = Sketch_4.addArc(-1.190531714553335e-011, 2.149585003540736e-011, -8.5, 15.2970585407786, -4.000000000000001, 17.03672503740078, True)
+SketchArc_5 = Sketch_4.addArc(0, 0, -8.5, 15.29705854, -4, 17.0367250374, True)
SketchArc_5.setName("SketchArc_4")
SketchArc_5.result().setName("SketchArc_4")
SketchArc_5.results()[1].setName("SketchArc_4_2")
SketchArc_5.setAuxiliary(True)
SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchArc_5.startPoint())
-SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_41")
-SketchArc_6 = Sketch_4.addArc(-2.234785556504386e-013, -4.022299956989981e-013, 4, 17.03672503740084, 8.5, 15.29705854077835, True)
+SketchArc_6 = Sketch_4.addArc(0, 0, 4, 17.0367250374, 8.5, 15.29705854, True)
SketchArc_6.setName("SketchArc_5")
SketchArc_6.result().setName("SketchArc_5")
SketchArc_6.results()[1].setName("SketchArc_5_2")
SketchArc_6.setAuxiliary(True)
SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.endPoint())
-SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_42")
-SketchPoint_3 = Sketch_4.addPoint(-4.000000000000001, 17.03672503740078)
+SketchPoint_3 = Sketch_4.addPoint(-4, 17.03672503740078)
SketchPoint_4 = Sketch_4.addPoint(4, 17.03672503740084)
SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchPoint_3.coordinates())
-SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_46")
SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchArc_6.startPoint(), SketchPoint_4.coordinates())
-SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_48")
SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
-SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_40")
SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_27.startPoint())
-SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
SketchArc_7 = Sketch_4.addArc(-10, 21.26617031813674, -7.446808510638298, 15.83650981137842, -4, 21.26617031813674, False)
SketchArc_7.setName("SketchArc_7")
SketchArc_7.result().setName("SketchArc_7")
SketchArc_7.results()[1].setName("SketchArc_7_2")
SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
-SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
-SketchLine_35 = Sketch_4.addLine(-4, 44.00000000000001, -4, 21.26617031813674)
+SketchLine_35 = Sketch_4.addLine(-4, 44, -4, 21.26617031813674)
SketchLine_35.setName("SketchLine_34")
SketchLine_35.result().setName("SketchLine_34")
SketchLine_35.setAuxiliary(True)
SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_7.endPoint(), SketchLine_35.endPoint())
-SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
SketchConstraintTangent_5 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_35.result())
SketchConstraintTangent_6 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchArc_3.results()[1])
SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.startPoint())
-SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_47")
SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_5.startPoint(), SketchArc_3.startPoint())
-SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_49")
SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchArc_3.results()[1])
SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_32.result())
-SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_50")
SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchArc_3.endPoint(), SketchArc_5.results()[1])
-SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_51")
SketchArc_8 = Sketch_4.addArc(10, 21.26617031813674, 4, 21.26617031813674, 7.446808510638299, 15.83650981137842, False)
SketchArc_8.setName("SketchArc_9")
SketchArc_8.result().setName("SketchArc_9")
SketchArc_8.results()[1].setName("SketchArc_9_2")
-SketchLine_36 = Sketch_4.addLine(4, 21.26617031813674, 4, 44.00000000000001)
+SketchLine_36 = Sketch_4.addLine(4, 21.26617031813674, 4, 44)
SketchLine_36.setName("SketchLine_35")
SketchLine_36.result().setName("SketchLine_35")
SketchLine_36.setAuxiliary(True)
SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_8.startPoint(), SketchLine_36.startPoint())
-SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_52")
SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchArc_8.endPoint(), SketchArc_4.startPoint())
-SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_53")
SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchArc_4.results()[1])
SketchConstraintTangent_9 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_36.result())
SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchArc_6.endPoint(), SketchArc_4.endPoint())
-SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_54")
SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_36.endPoint())
-SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_55")
SketchConstraintTangent_10 = Sketch_4.setTangent(SketchArc_6.results()[1], SketchArc_4.results()[1])
SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchArc_6.results()[1])
-SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_56")
SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_27.result())
-SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
-SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/SketchCircle_1_2"))
SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
-SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
-SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5, False)
-SketchConstraintDistance_11.setName("SketchConstraintDistance_11")
SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4, False)
-SketchConstraintDistance_12.setName("SketchConstraintDistance_12")
SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4, False)
-SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
-SketchArc_9 = Sketch_4.addArc(-10, 38.00000000000001, -4, 38.00000000000001, -9.999999999999854, 44.00000000000001, False)
+SketchArc_9 = Sketch_4.addArc(-10, 38, -4, 38, -10, 44, False)
SketchArc_9.setName("SketchArc_10")
SketchArc_9.result().setName("SketchArc_10")
SketchArc_9.results()[1].setName("SketchArc_10_2")
SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchArc_9.startPoint(), SketchLine_20.startPoint())
-SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_61")
SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_9.endPoint(), SketchLine_23.endPoint())
-SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_62")
SketchConstraintTangent_11 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_20.result())
SketchConstraintTangent_12 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_23.result())
SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_20.endPoint())
-SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_63")
SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_23.startPoint())
-SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_64")
SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_20.startPoint(), SketchLine_35.result())
-SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_65")
SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_31.result())
-SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_66")
-SketchArc_10 = Sketch_4.addArc(10, 37.99999999999996, 9.99999999990029, 43.99999998819102, 4, 37.99999998819019, False)
+SketchArc_10 = Sketch_4.addArc(10, 38, 10, 44, 4, 38, False)
SketchArc_10.setName("SketchArc_11")
SketchArc_10.result().setName("SketchArc_11")
SketchArc_10.results()[1].setName("SketchArc_11_2")
SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_10.startPoint(), SketchLine_24.startPoint())
-SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_67")
SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_10.endPoint(), SketchLine_21.endPoint())
-SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_68")
SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_21.result())
SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_24.result())
SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_21.startPoint())
-SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_69")
SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_24.endPoint())
-SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_70")
SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_36.result())
-SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_71")
SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_26.result())
-SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_72")
SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1, False)
-SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1, False)
-SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
SketchLine_37.setName("SketchLine_40")
SketchLine_37.result().setName("SketchLine_40")
SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44, False)
-SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1, False)
-SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1, False)
-SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_3.center(), SketchCircle_3.center())
-SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_149")
SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_4.center(), SketchArc_3.center())
-SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_150")
SketchConstraintDistance_19 = Sketch_4.setDistance(SketchArc_4.center(), SketchLine_34.result(), 12, False)
-SketchConstraintDistance_19.setName("SketchConstraintDistance_43")
model.do()
Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
Common_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_38 = Sketch_5.addLine(44, 3.464101615137744, 16.50000000000003, 51.09549882328188)
+SketchLine_38 = Sketch_5.addLine(44, 3.464101615137764, 16.5, 51.0954988232819)
SketchLine_38.setName("SketchLine_41")
SketchLine_38.result().setName("SketchLine_41")
SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_5.result())
-SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_73")
SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
SketchLine_39.setName("SketchLine_42")
SketchLine_39.result().setName("SketchLine_42")
SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_38.result(), 55)
-SketchConstraintLength_1.setName("SketchConstraintLength_6")
model.do()
Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r"), model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/SketchLine_41_EndVertex"), False)
Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchLine_40 = Sketch_6.addLine(3.999999999999999, 13.00000000002605, 4, 12.89999999999998)
+SketchLine_40 = Sketch_6.addLine(4, 13, 4, 12.9)
SketchLine_40.setName("SketchLine_55")
SketchLine_40.result().setName("SketchLine_55")
-SketchLine_41 = Sketch_6.addLine(4, 12.89999999999998, -4, 12.89999999999998)
+SketchLine_41 = Sketch_6.addLine(4, 12.9, -4, 12.9)
SketchLine_41.setName("SketchLine_44")
SketchLine_41.result().setName("SketchLine_44")
-SketchLine_42 = Sketch_6.addLine(4, 19.00000000002614, 4, 12.89999999999998)
+SketchLine_42 = Sketch_6.addLine(4, 19, 4, 12.9)
SketchLine_42.setName("SketchLine_43")
SketchLine_42.result().setName("SketchLine_43")
SketchLine_42.setAuxiliary(True)
SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_41.startPoint())
-SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_74")
-SketchLine_43 = Sketch_6.addLine(-4, 12.89999999999998, -4.000000000000001, 13.00000000002612)
+SketchLine_43 = Sketch_6.addLine(-4, 12.9, -4, 13)
SketchLine_43.setName("SketchLine_52")
SketchLine_43.result().setName("SketchLine_52")
-SketchLine_44 = Sketch_6.addLine(-9.999999999999867, 19.00000000002614, -10.09999999999998, 19.00000000002614)
+SketchLine_44 = Sketch_6.addLine(-10, 19, -10.1, 19)
SketchLine_44.setName("SketchLine_53")
SketchLine_44.result().setName("SketchLine_53")
-SketchLine_45 = Sketch_6.addLine(-4, 12.89999999999998, -4, 19.00000000002614)
+SketchLine_45 = Sketch_6.addLine(-4, 12.9, -4, 19)
SketchLine_45.setName("SketchLine_45")
SketchLine_45.result().setName("SketchLine_45")
SketchLine_45.setAuxiliary(True)
SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
-SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_75")
-SketchLine_46 = Sketch_6.addLine(10.09999999999999, 19.00000000002614, 9.999999999999858, 19.00000000002614)
+SketchLine_46 = Sketch_6.addLine(10.1, 19, 10, 19)
SketchLine_46.setName("SketchLine_54")
SketchLine_46.result().setName("SketchLine_54")
-SketchLine_47 = Sketch_6.addLine(-4, 19.00000000002614, -10.09999999999998, 19.00000000002614)
+SketchLine_47 = Sketch_6.addLine(-4, 19, -10.1, 19)
SketchLine_47.setName("SketchLine_46")
SketchLine_47.result().setName("SketchLine_46")
SketchLine_47.setAuxiliary(True)
SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_47.startPoint())
-SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_76")
-SketchLine_48 = Sketch_6.addLine(-10.09999999999998, 19.00000000002614, -10.09999999999998, 19.80000000002615)
+SketchLine_48 = Sketch_6.addLine(-10.1, 19, -10.1, 19.8)
SketchLine_48.setName("SketchLine_47")
SketchLine_48.result().setName("SketchLine_47")
SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
-SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_77")
-SketchLine_49 = Sketch_6.addLine(-10.09999999999998, 19.80000000002615, 10.09999999999999, 19.80000000002615)
+SketchLine_49 = Sketch_6.addLine(-10.1, 19.8, 10.1, 19.8)
SketchLine_49.setName("SketchLine_48")
SketchLine_49.result().setName("SketchLine_48")
SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
-SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_78")
-SketchLine_50 = Sketch_6.addLine(10.09999999999999, 19.80000000002615, 10.09999999999999, 19.00000000002614)
+SketchLine_50 = Sketch_6.addLine(10.1, 19.8, 10.1, 19)
SketchLine_50.setName("SketchLine_49")
SketchLine_50.result().setName("SketchLine_49")
SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
-SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_79")
-SketchLine_51 = Sketch_6.addLine(10.09999999999999, 19.00000000002614, 4, 19.00000000002614)
+SketchLine_51 = Sketch_6.addLine(10.1, 19, 4, 19)
SketchLine_51.setName("SketchLine_50")
SketchLine_51.result().setName("SketchLine_50")
SketchLine_51.setAuxiliary(True)
SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
-SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_80")
SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchLine_42.startPoint(), SketchLine_51.endPoint())
-SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_81")
SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_45.result())
SketchConstraintVertical_12 = Sketch_6.setVertical(SketchLine_42.result())
SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_41.result())
SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8, False)
-SketchConstraintDistance_20.setName("SketchConstraintDistance_20")
SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8, False)
-SketchConstraintDistance_21.setName("SketchConstraintDistance_21")
SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_41"))
SketchLine_52.setName("SketchLine_51")
SketchLine_52.result().setName("SketchLine_51")
SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4, False)
-SketchConstraintDistance_22.setName("SketchConstraintDistance_22")
SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4, False)
-SketchConstraintDistance_23.setName("SketchConstraintDistance_23")
-SketchArc_11 = Sketch_6.addArc(-10, 13.00000000002614, -4.000000000000001, 13.00000000002612, -9.999999999999867, 19.00000000002614, False)
+SketchArc_11 = Sketch_6.addArc(-10, 13, -4, 13, -10, 19, False)
SketchArc_11.setName("SketchArc_12")
SketchArc_11.result().setName("SketchArc_12")
SketchArc_11.results()[1].setName("SketchArc_12_2")
SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_43.endPoint())
-SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_82")
SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_44.startPoint())
-SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_83")
SketchConstraintTangent_15 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_43.result())
SketchConstraintTangent_16 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_44.result())
SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
-SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_84")
SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_44.endPoint())
-SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_85")
SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
-SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_86")
SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_47.result())
-SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_87")
-SketchArc_12 = Sketch_6.addArc(9.999999999999998, 13.00000000002614, 9.999999999999858, 19.00000000002614, 3.999999999999999, 13.00000000002605, False)
+SketchArc_12 = Sketch_6.addArc(10, 13, 10, 19, 4, 13, False)
SketchArc_12.setName("SketchArc_13")
SketchArc_12.result().setName("SketchArc_13")
SketchArc_12.results()[1].setName("SketchArc_13_2")
SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_46.endPoint())
-SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_88")
SketchConstraintCoincidence_85 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_40.startPoint())
-SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_89")
SketchConstraintTangent_17 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_46.result())
SketchConstraintTangent_18 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_40.result())
SketchConstraintCoincidence_86 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_46.startPoint())
-SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_90")
SketchConstraintCoincidence_87 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_40.endPoint())
-SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_91")
SketchConstraintCoincidence_88 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_51.result())
-SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_92")
SketchConstraintCoincidence_89 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_42.result())
-SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_93")
SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1, False)
-SketchConstraintDistance_24.setName("SketchConstraintDistance_24")
SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1, False)
-SketchConstraintDistance_25.setName("SketchConstraintDistance_25")
SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
SketchConstraintDistance_26 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1, False)
-SketchConstraintDistance_26.setName("SketchConstraintDistance_26")
SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
SketchLine_53.setName("SketchLine_56")
SketchLine_53.result().setName("SketchLine_56")
SketchConstraintCoincidence_90 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
-SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
model.do()
Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_13_2r-SketchLine_54r-SketchLine_49r-SketchLine_48r-SketchLine_47r-SketchLine_53r-SketchArc_12_2r-SketchLine_52r-SketchLine_44r-SketchLine_55r")], model.selection(), 0, 40)
Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Common_1_1")], [model.selection("SOLID", "Common_2_1")])
SketchLine_55.result().setName("SketchLine_57")
SketchLine_55.setAuxiliary(True)
SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result())
-SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95")
SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]"))
SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result())
-SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96")
-SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70)
+SketchLine_56 = Sketch_7.addLine(45, -70, -45, -70)
SketchLine_56.setName("SketchLine_67")
SketchLine_56.result().setName("SketchLine_67")
SketchLine_57 = Sketch_7.addLine(55, -70, -55, -70)
SketchLine_57.result().setName("SketchLine_58")
SketchLine_57.setAuxiliary(True)
SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
-SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97")
SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result())
-SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98")
-SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024)
+SketchLine_58 = Sketch_7.addLine(-55, -60, -55, -9.237604307034024)
SketchLine_58.setName("SketchLine_68")
SketchLine_58.result().setName("SketchLine_68")
SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024)
SketchLine_59.result().setName("SketchLine_59")
SketchLine_59.setAuxiliary(True)
SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
-SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99")
SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
-SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100")
-SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60.00000000000001, -9.237604307034024)
+SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60, -9.237604307034024)
SketchLine_60.setName("SketchLine_60")
SketchLine_60.result().setName("SketchLine_60")
SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
-SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_101")
-SketchLine_61 = Sketch_7.addLine(-60.00000000000001, -9.237604307034024, -60.00000000000001, -79.23760430703402)
+SketchLine_61 = Sketch_7.addLine(-60, -9.237604307034024, -60, -79.23760430703402)
SketchLine_61.setName("SketchLine_61")
SketchLine_61.result().setName("SketchLine_61")
SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
-SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_102")
-SketchLine_62 = Sketch_7.addLine(-60.00000000000001, -79.23760430703402, 60, -79.23760430703402)
+SketchLine_62 = Sketch_7.addLine(-60, -79.23760430703402, 60, -79.23760430703402)
SketchLine_62.setName("SketchLine_62")
SketchLine_62.result().setName("SketchLine_62")
SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
-SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_103")
SketchLine_63 = Sketch_7.addLine(60, -79.23760430703402, 60, -9.237604307034024)
SketchLine_63.setName("SketchLine_63")
SketchLine_63.result().setName("SketchLine_63")
SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
-SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_104")
SketchLine_64 = Sketch_7.addLine(60, -9.237604307034024, 55, -9.237604307034024)
SketchLine_64.setName("SketchLine_64")
SketchLine_64.result().setName("SketchLine_64")
SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
-SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_105")
SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
-SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_106")
SketchConstraintCoincidence_103 = Sketch_7.setCoincident(SketchPoint_6.coordinates(), SketchLine_64.endPoint())
-SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_107")
SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_64.result())
SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_60.result())
SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_62.result())
SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_61.result())
SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_63.result())
-SketchArc_13 = Sketch_7.addArc(45, -60, 45.00000000000001, -70, 55, -60, False)
+SketchArc_13 = Sketch_7.addArc(45, -60, 45, -70, 55, -60, False)
SketchArc_13.setName("SketchArc_14")
SketchArc_13.result().setName("SketchArc_14")
SketchArc_13.results()[1].setName("SketchArc_14_2")
-SketchLine_65 = Sketch_7.addLine(45.00000000000001, -70, -55, -70)
+SketchLine_65 = Sketch_7.addLine(45, -70, -55, -70)
SketchLine_65.setName("SketchLine_65")
SketchLine_65.result().setName("SketchLine_65")
SketchLine_65.setAuxiliary(True)
SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
-SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_108")
SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchArc_13.endPoint(), SketchLine_54.endPoint())
-SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_109")
SketchConstraintTangent_19 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_65.result())
SketchConstraintTangent_20 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_54.result())
SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_65.endPoint())
-SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_110")
SketchConstraintCoincidence_107 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_54.startPoint())
-SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_111")
SketchConstraintCoincidence_108 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_57.result())
-SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_112")
SketchConstraintCoincidence_109 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
-SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_113")
-SketchArc_14 = Sketch_7.addArc(-45.00000000000001, -60.00000000000004, -55.00000000000001, -59.99999999999999, -45.00000000000001, -70, False)
+SketchArc_14 = Sketch_7.addArc(-45, -60, -55, -60, -45, -70, False)
SketchArc_14.setName("SketchArc_15")
SketchArc_14.result().setName("SketchArc_15")
SketchArc_14.results()[1].setName("SketchArc_15_2")
SketchConstraintCoincidence_110 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_58.startPoint())
-SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_114")
SketchConstraintCoincidence_111 = Sketch_7.setCoincident(SketchArc_14.endPoint(), SketchLine_56.endPoint())
-SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_115")
SketchConstraintTangent_21 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_56.result())
SketchConstraintTangent_22 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_58.result())
SketchConstraintCoincidence_112 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_56.startPoint())
-SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_116")
SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.endPoint())
-SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_117")
SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_65.result())
-SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_118")
SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
-SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_119")
SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_13.results()[1], 10)
SketchConstraintRadius_12 = Sketch_7.setRadius(SketchArc_14.results()[1], 10)
SketchCircle_4 = Sketch_7.addCircle(44, -59, 5)
-SketchCircle_5 = Sketch_7.addCircle(-43.99999999999999, -58.99999999999999, 5)
+SketchCircle_5 = Sketch_7.addCircle(-44, -59, 5)
SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11, False)
-SketchConstraintDistance_27.setName("SketchConstraintDistance_27")
SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11, False)
-SketchConstraintDistance_28.setName("SketchConstraintDistance_28")
SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11, False)
-SketchConstraintDistance_29.setName("SketchConstraintDistance_29")
SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11, False)
-SketchConstraintDistance_30.setName("SketchConstraintDistance_30")
SketchCircle_6 = Sketch_7.addCircle(44, -20.23760430703402, 5)
SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11, False)
-SketchConstraintDistance_31.setName("SketchConstraintDistance_31")
SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10]"))
SketchLine_66.setName("SketchLine_69")
SketchLine_66.result().setName("SketchLine_69")
SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11, False)
-SketchConstraintDistance_32.setName("SketchConstraintDistance_32")
SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11, False)
-SketchConstraintDistance_33.setName("SketchConstraintDistance_33")
SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11, False)
-SketchConstraintDistance_34.setName("SketchConstraintDistance_34")
SketchConstraintLength_2 = Sketch_7.setLength(SketchLine_62.result(), 120)
-SketchConstraintLength_2.setName("SketchConstraintLength_7")
SketchConstraintLength_3 = Sketch_7.setLength(SketchLine_61.result(), 70)
-SketchConstraintLength_3.setName("SketchConstraintLength_8")
SketchConstraintDistanceHorizontal_1 = Sketch_7.setHorizontalDistance(SketchPoint_7.coordinates(), SketchLine_62.endPoint(), 5)
model.do()
ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchLine_66r-SketchArc_14_2r-SketchLine_67f-SketchArc_15_2r-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f_wire"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")]
SketchLine_68.result().setName("SketchLine_70")
SketchLine_68.setAuxiliary(True)
SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
-SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_66)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
-SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
-SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
+SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -45, 76.69872981077805)
SketchLine_69.setName("SketchLine_80")
SketchLine_69.result().setName("SketchLine_80")
SketchLine_70 = Sketch_8.addLine(55, 76.69872981077803, -55, 76.69872981077803)
SketchLine_70.result().setName("SketchLine_71")
SketchLine_70.setAuxiliary(True)
SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
-SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122")
SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "[(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_68)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
-SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123")
SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
SketchLine_71.setName("SketchLine_81")
SketchLine_71.result().setName("SketchLine_81")
SketchLine_72.result().setName("SketchLine_72")
SketchLine_72.setAuxiliary(True)
SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
-SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_68)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11]"))
SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
-SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
SketchLine_73.setName("SketchLine_73")
SketchLine_73.result().setName("SketchLine_73")
SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
-SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_126")
SketchLine_74 = Sketch_8.addLine(-83.25521566485324, -34.06366588218793, -83.25521566485298, 92.00148393088952)
SketchLine_74.setName("SketchLine_74")
SketchLine_74.result().setName("SketchLine_74")
SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
-SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_127")
SketchLine_75 = Sketch_8.addLine(-83.25521566485298, 92.00148393088952, 87.50975635635101, 92.00148393088952)
SketchLine_75.setName("SketchLine_75")
SketchLine_75.result().setName("SketchLine_75")
SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
-SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_128")
SketchLine_76 = Sketch_8.addLine(87.50975635635101, 92.00148393088952, 87.50975635635101, -34.06366588218793)
SketchLine_76.setName("SketchLine_76")
SketchLine_76.result().setName("SketchLine_76")
SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
-SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_129")
SketchLine_77 = Sketch_8.addLine(87.50975635635101, -34.06366588218793, 55, -34.06366588218793)
SketchLine_77.setName("SketchLine_77")
SketchLine_77.result().setName("SketchLine_77")
SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
-SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_130")
SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
-SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_131")
SketchConstraintCoincidence_128 = Sketch_8.setCoincident(SketchPoint_10.coordinates(), SketchLine_77.endPoint())
-SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_132")
SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_77.result())
SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_73.result())
SketchConstraintHorizontal_16 = Sketch_8.setHorizontal(SketchLine_75.result())
SketchArc_15.result().setName("SketchArc_16")
SketchArc_15.results()[1].setName("SketchArc_16_2")
SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
-SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_133")
SketchLine_78 = Sketch_8.addLine(45, 76.69872981077805, -55, 76.69872981077803)
SketchLine_78.setName("SketchLine_78")
SketchLine_78.result().setName("SketchLine_78")
SketchLine_78.setAuxiliary(True)
SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
-SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_134")
SketchConstraintTangent_23 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_78.result())
SketchConstraintTangent_24 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_67.result())
SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_78.endPoint())
-SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_135")
SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
-SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_136")
SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_70.result())
-SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_137")
SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
-SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_138")
-SketchArc_16 = Sketch_8.addArc(-44.9999999570576, 66.69872976783566, -44.9999999570576, 76.69872981077805, -55, 66.69872976783566, False)
+SketchArc_16 = Sketch_8.addArc(-45, 66.69872976783566, -45, 76.69872981077805, -55, 66.69872976783566, False)
SketchArc_16.setName("SketchArc_17")
SketchArc_16.result().setName("SketchArc_17")
SketchArc_16.results()[1].setName("SketchArc_17_2")
SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchArc_16.startPoint(), SketchLine_69.endPoint())
-SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_139")
SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_16.endPoint(), SketchLine_71.startPoint())
-SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_140")
SketchConstraintTangent_25 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_69.result())
SketchConstraintTangent_26 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_71.result())
SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_69.startPoint())
-SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_141")
SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_71.endPoint())
-SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_142")
SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_69.endPoint(), SketchLine_78.result())
-SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_143")
SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchLine_71.startPoint(), SketchLine_72.result())
-SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_144")
SketchConstraintRadius_17 = Sketch_8.setRadius(SketchArc_15.results()[1], 10)
SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25, False)
-SketchConstraintDistance_35.setName("SketchConstraintDistance_35")
SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11, False)
-SketchConstraintDistance_36.setName("SketchConstraintDistance_36")
SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077805, 5)
SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11, False)
-SketchConstraintDistance_37.setName("SketchConstraintDistance_37")
SketchConstraintDistance_38 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60, False)
-SketchConstraintDistance_38.setName("SketchConstraintDistance_38")
-SketchArc_17 = Sketch_8.addArc(44, 16.69872981077803, 49, 16.69872981077806, 39, 16.69872981077804, True)
+SketchArc_17 = Sketch_8.addArc(44, 16.69872981077805, 49, 16.69872981077805, 39, 16.69872981077805, True)
SketchArc_17.setName("SketchArc_19")
SketchArc_17.result().setName("SketchArc_19")
SketchArc_17.results()[1].setName("SketchArc_19_2")
SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
-SketchConstraintRadius_21.setName("SketchConstraintRadius_22")
SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60, False)
-SketchConstraintDistance_39.setName("SketchConstraintDistance_41")
-SketchArc_18 = Sketch_8.addArc(44, 51.69872981077805, 49, 51.69872981077805, 39.00000000000002, 51.69873025170988, False)
+SketchArc_18 = Sketch_8.addArc(44, 51.69872981077805, 49, 51.69872981077805, 39, 51.69872981077805, False)
SketchArc_18.setName("SketchArc_18")
SketchArc_18.result().setName("SketchArc_18")
SketchArc_18.results()[1].setName("SketchArc_18_2")
-SketchLine_79 = Sketch_8.addLine(49, 16.69872981077806, 49, 51.69872981077805)
+SketchLine_79 = Sketch_8.addLine(49, 16.69872981077805, 49, 51.69872981077805)
SketchLine_79.setName("SketchLine_82")
SketchLine_79.result().setName("SketchLine_82")
SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchArc_18.startPoint(), SketchLine_79.endPoint())
-SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145")
SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_79.startPoint(), SketchArc_17.startPoint())
-SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_146")
-SketchLine_80 = Sketch_8.addLine(39, 16.69872981077804, 39.00000000000002, 51.69873025170988)
+SketchLine_80 = Sketch_8.addLine(39, 16.69872981077805, 39, 51.69872981077805)
SketchLine_80.setName("SketchLine_83")
SketchLine_80.result().setName("SketchLine_83")
SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchArc_17.endPoint(), SketchLine_80.startPoint())
-SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_147")
SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
-SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_148")
SketchConstraintDistance_40 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11, False)
-SketchConstraintDistance_40.setName("SketchConstraintDistance_40")
SketchConstraintDistance_41 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25, False)
-SketchConstraintDistance_41.setName("SketchConstraintDistance_42")
SketchConstraintDistance_42 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11, False)
-SketchConstraintDistance_42.setName("SketchConstraintDistance_44")
SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
-SketchConstraintRadius_22.setName("SketchConstraintRadius_23")
SketchConstraintLength_4 = Sketch_8.setLength(SketchLine_80.result(), 35.000000440932)
-SketchConstraintLength_4.setName("SketchConstraintLength_1")
SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_79.result(), 35)
-SketchConstraintLength_5.setName("SketchConstraintLength_2")
SketchConstraintLength_6 = Sketch_8.setLength(SketchLine_75.result(), 170.764972021204)
-SketchConstraintLength_6.setName("SketchConstraintLength_3")
SketchConstraintLength_7 = Sketch_8.setLength(SketchLine_77.result(), 32.509756356351)
-SketchConstraintLength_7.setName("SketchConstraintLength_4")
SketchConstraintLength_8 = Sketch_8.setLength(SketchLine_76.result(), 126.065149813077)
-SketchConstraintLength_8.setName("SketchConstraintLength_5")
SketchConstraintDistance_43 = Sketch_8.setDistance(SketchArc_18.endPoint(), SketchLine_69.result(), 24.999999559068, False)
-SketchConstraintDistance_43.setName("SketchConstraintDistance_45")
SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25, False)
-SketchConstraintDistance_44.setName("SketchConstraintDistance_46")
model.do()
ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_77r-SketchLine_76r-SketchLine_75r-SketchLine_74r-SketchLine_73r-SketchLine_81r-SketchArc_17_2r-SketchLine_80r-SketchArc_16_2r-SketchLine_79r"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_8_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_9_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchArc_19_2f-SketchLine_82f-SketchArc_18_2f-SketchLine_83r_wire")]
ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
# unstable numbers
#model.testNbSubShapes(Fuse_3, GeomAPI_Shape.EDGE, [266])
#model.testNbSubShapes(Fuse_3, GeomAPI_Shape.VERTEX, [532])
-model.testResultsVolumes(Fuse_3, [156999.209584889642428606748580933])
+model.testResultsVolumes(Fuse_3, [156999.196618517889874055981636])
assert(model.checkPythonDump())
