FiltersPlugin_OnLine.h
FiltersPlugin_OnGeometry.h
FiltersPlugin_OnPlaneSide.h
- FiltersPlugin_OnShapeName.h
FiltersPlugin_OppositeToEdge.h
FiltersPlugin_RelativeToSolid.h
FiltersPlugin_ExternalFaces.h
FiltersPlugin_OnLine.cpp
FiltersPlugin_OnGeometry.cpp
FiltersPlugin_OnPlaneSide.cpp
- FiltersPlugin_OnShapeName.cpp
FiltersPlugin_OppositeToEdge.cpp
FiltersPlugin_RelativeToSolid.cpp
FiltersPlugin_ExternalFaces.cpp
filter-OnLine.xml
filter-OnPlane.xml
filter-OnPlaneSide.xml
- filter-OnShapeName.xml
filter-OppositeToEdge.xml
filter-RelativeToSolid.xml
filter-TopoConnectedFaces.xml
SOURCE_GROUP ("XML Files" FILES ${XML_RESOURCES})
SOURCE_GROUP ("Resource Files" FILES ${TEXT_RESOURCES})
-ADD_DEFINITIONS(-DFILTERS_EXPORTS ${OpenCASCADE_DEFINITIONS} ${BOOST_DEFINITIONS})
+ADD_DEFINITIONS(-DFILTERS_EXPORTS ${OpenCASCADE_DEFINITIONS})
ADD_LIBRARY(FiltersPlugin SHARED ${PROJECT_SOURCES} ${PROJECT_HEADERS} ${XML_RESOURCES} ${TEXT_RESOURCES})
TARGET_LINK_LIBRARIES(FiltersPlugin ${PROJECT_LIBRARIES})
INCLUDE_DIRECTORIES(
${OpenCASCADE_INCLUDE_DIR}
- ${Boost_INCLUDE_DIRS}
${PROJECT_SOURCE_DIR}/src/ModelAPI
${PROJECT_SOURCE_DIR}/src/Config
${PROJECT_SOURCE_DIR}/src/Events
${PROJECT_SOURCE_DIR}/src/GeomDataAPI
${PROJECT_SOURCE_DIR}/src/GeomValidators
${PROJECT_SOURCE_DIR}/src/CollectionPlugin
- ${PROJECT_SOURCE_DIR}/src/Locale
)
INSTALL(TARGETS FiltersPlugin DESTINATION ${SHAPER_INSTALL_PLUGIN_FILES})
+++ /dev/null
-// Copyright (C) 2014-2023 CEA, EDF
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-//
-
-#include "FiltersPlugin_OnShapeName.h"
-
-#include <ModelAPI_AttributeString.h>
-// #include <Model_Data.h>
-// #include <TDF_Label.hxx>
-// #include <TNaming_Builder.hxx>
-// #include <TNaming_NamedShape.hxx>
-// #include <TDataStd_Name.hxx>
-// #include <TNaming_Tool.hxx>
-// #include <TopoDS_Shape.hxx>
-
-#include <Locale_Convert.h>
-#include <boost/algorithm/string.hpp>
-
-bool FiltersPlugin_OnShapeName::isSupported(GeomAPI_Shape::ShapeType /*theType*/) const
-{
- return true;
-}
-
-static bool getShapesName(const GeomShapePtr& theShape,
- ResultBodyPtr theResultBody,
- std::string& theShapeName)
-{
- int nbSubRes = theResultBody->numberOfSubs();
- if(theResultBody->shape()->isSame(theShape) || (nbSubRes == 0 && theResultBody->shape()->isSubShape(theShape)))
- {
- DataPtr data = theResultBody->data();
- if (data.get())
- {
- theShapeName = Locale::Convert::toString(data->name());
- return true;
- }
- }
-
- bool aResult(false);
- ResultBodyPtr subResult;
- for (int i = 0; i < nbSubRes; i++)
- {
- subResult = theResultBody->subResult(i);
- if(getShapesName(theShape, subResult, theShapeName))
- {
- aResult = true;
- break;
- }
- }
-
- return aResult;
-}
-
-bool FiltersPlugin_OnShapeName::isOk(const GeomShapePtr& theShape, const ResultPtr& theResult,
- const ModelAPI_FiltersArgs& theArgs) const
-{
- AttributePtr anAttr = theArgs.argument("pattern");
- AttributeStringPtr aValue = std::dynamic_pointer_cast<ModelAPI_AttributeString>(anAttr);
- if (!aValue.get()|| !anAttr->isInitialized())
- return false;
- std::string aPattern= aValue->value();
-
-
- ResultBodyPtr aBodyRes = std::dynamic_pointer_cast<ModelAPI_ResultBody>(theResult);
- std::string aShapeName;
- if(!getShapesName(theShape, aBodyRes, aShapeName))
- {
- return false;
- }
-
- //remove * from both sides of pattern
- if(aPattern.back() == '*' && aPattern.front() == '*')
- {
- aPattern.pop_back();
- aPattern.erase(aPattern.begin());
- }
-
- bool isFound = false;
- if(aPattern.front() == '*')
- {
- aPattern.erase(aPattern.begin());
- isFound = boost::algorithm::ends_with(aShapeName, aPattern);
- }
- else if(aPattern.back() == '*')
- {
- aPattern.pop_back();
- isFound = boost::algorithm::starts_with(aShapeName, aPattern);
- }
- else
- {
- isFound = (aShapeName.find(aPattern) != std::string::npos);
- }
-
- return isFound;
-}
-
-std::string FiltersPlugin_OnShapeName::xmlRepresentation() const
-{
- return xmlFromFile("filter-OnShapeName.xml");
-}
-
-void FiltersPlugin_OnShapeName::initAttributes(ModelAPI_FiltersArgs& theArguments)
-{
- theArguments.initAttribute("pattern", ModelAPI_AttributeString::typeId());
-}
\ No newline at end of file
+++ /dev/null
-// Copyright (C) 2014-2023 CEA, EDF
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-//
-
-#ifndef FILTERSPLUGIN_ONSHAPENAME_H_
-#define FILTERSPLUGIN_ONSHAPENAME_H_
-
-#include "FiltersPlugin.h"
-
-#include <ModelAPI_Filter.h>
-
-/**\class FiltersPlugin_OnPlaneSide
-* \ingroup DataModel
-* \brief Filter for objects which lying on the side of selected plane
-*/
-class FiltersPlugin_OnShapeName : public ModelAPI_Filter
-{
-public:
- FiltersPlugin_OnShapeName() : ModelAPI_Filter() {}
-
- virtual const std::string& name() const
- {
- static const std::string kName("On shape name");
- return kName;
- }
-
- /// Returns true for face type
- virtual bool isSupported(GeomAPI_Shape::ShapeType theType) const override;
-
- /// This method should contain the filter logic. It returns true if the given shape
- /// is accepted by the filter.
- /// \param theShape the given shape
- /// \param theArgs arguments of the filter
- virtual bool isOk(const GeomShapePtr& theShape, const ResultPtr&,
- const ModelAPI_FiltersArgs& theArgs) const override;
-
- /// Returns XML string which represents GUI of the filter
- virtual std::string xmlRepresentation() const override;
-
- /// Initializes arguments of a filter.
- virtual void initAttributes(ModelAPI_FiltersArgs& theArguments) override;
-};
-
-#endif
#include "FiltersPlugin_OnLine.h"
#include "FiltersPlugin_OnPlane.h"
#include "FiltersPlugin_OnPlaneSide.h"
-#include "FiltersPlugin_OnShapeName.h"
#include "FiltersPlugin_OppositeToEdge.h"
#include "FiltersPlugin_Plugin.h"
#include "FiltersPlugin_RelativeToSolid.h"
aFactory->registerFilter("VolumeSize", new FiltersPlugin_VolumeSize);
aFactory->registerFilter("FeatureEdges", new FiltersPlugin_FeatureEdges);
aFactory->registerFilter("ContinuousFaces", new FiltersPlugin_ContinuousFaces);
- aFactory->registerFilter("OnShapeName", new FiltersPlugin_OnShapeName);
Config_ModuleReader::loadScript("FiltersPlugin_TopoConnectedFaces");
<source>Opposite to an edge</source>
<translation>Opposite to an edge</translation>
</message>
- <message>
- <source>On shape name</source>
- <translation>On shape name</translation>
- </message>
<message>
<source>Topologically connected faces</source>
<translation>Topologically connected faces</translation>
</message>
</context>
- <!-- OnShapeName -->
- <context>
- <name>OnShapeName</name>
- <message>
- <source>Search pattern:</source>
- <translation>Search pattern:</translation>
- </message>
- </context>
-
</TS>
<source>Opposite to an edge</source>
<translation>En face d'un bord</translation>
</message>
- <message>
- <source>On shape name</source>
- <translation>Sur le nom des shapes</translation>
- </message>
<message>
<source>Topologically connected faces</source>
<translation>Faces topologiquement connectés</translation>
</message>
</context>
- <!-- OnShapeName -->
- <context>
- <name>OnShapeName</name>
- <message>
- <source>Search pattern:</source>
- <translation>Modèle de recherche:</translation>
- </message>
- </context>
-
</TS>
+++ /dev/null
-# Copyright (C) 2014-2023 CEA, EDF
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-import sys
-import salome
-
-salome.salome_init()
-import salome_notebook
-notebook = salome_notebook.NoteBook()
-sys.path.insert(0, r'/home/eksu/S2')
-
-###
-### SHAPER component
-###
-
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-
-### Create Part
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "rayon", '10.')
-model.addParameter(Part_1_doc, "hauteur", '2.*rayon')
-
-### Create Sketch
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-
-### Create SketchProjection
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-
-### Create SketchCircle
-SketchCircle_1 = Sketch_1.addCircle(0, 0, 10)
-Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
-Sketch_1.setRadius(SketchCircle_1.results()[1], "rayon ")
-model.do()
-
-### Create Extrusion
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), "hauteur ", "hauteur/4.", "Faces|Wires")
-
-### Create Sketch
-Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
-
-### Create SketchLine
-SketchLine_1 = Sketch_2.addLine(12.5, -12.5, -12.5, -12.5)
-
-### Create SketchProjection
-SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_2 = SketchProjection_2.createdFeature()
-
-### Create SketchLine
-SketchLine_2 = Sketch_2.addLine(-12.5, -12.5, -12.5, 12.5)
-
-### Create SketchLine
-SketchLine_3 = Sketch_2.addLine(-12.5, 12.5, 12.5, 12.5)
-
-### Create SketchLine
-SketchLine_4 = Sketch_2.addLine(12.5, 12.5, 12.5, -12.5)
-Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
-Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
-Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-
-### Create SketchLine
-SketchLine_5 = Sketch_2.addLine(12.5, -12.5, -12.5, 12.5)
-SketchLine_5.setAuxiliary(True)
-
-### Create SketchLine
-SketchLine_6 = Sketch_2.addLine(-12.5, -12.5, 12.5, 12.5)
-SketchLine_6.setAuxiliary(True)
-Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
-Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_6.startPoint())
-Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchLine_5.endPoint())
-Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_6.endPoint())
-Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_5.result())
-Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_6.result())
-Sketch_2.setHorizontal(SketchLine_1.result())
-Sketch_2.setVertical(SketchLine_2.result())
-Sketch_2.setHorizontal(SketchLine_3.result())
-Sketch_2.setVertical(SketchLine_4.result())
-Sketch_2.setLength(SketchLine_3.result(), "2.5*rayon")
-Sketch_2.setEqual(SketchLine_3.result(), SketchLine_2.result())
-model.do()
-
-### Create Extrusion
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_2")], model.selection(), 0, "2.*rayon", "Faces|Wires")
-
-### Create Sketch
-Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
-
-### Create SketchLine
-SketchLine_7 = Sketch_3.addLine(-4.930380657631324e-32, -6, -4.930380657631324e-32, 6)
-
-### Create SketchProjection
-SketchProjection_3 = Sketch_3.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_3 = SketchProjection_3.createdFeature()
-Sketch_3.setMiddlePoint(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_7.result())
-Sketch_3.setVertical(SketchLine_7.result())
-Sketch_3.setLength(SketchLine_7.result(), "1.2*rayon")
-model.do()
-
-### Create Extrusion
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_3")], model.selection("EDGE", "PartSet/OZ"), "hauteur*1.4", "hauteur*0.4", "Edges")
-
-### Create Extrusion
-Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("VERTEX", "PartSet/Origin")], model.selection("EDGE", "PartSet/OY"), "rayon*1.6", "rayon*1.6")
-
-### Create Translation
-Translation_1 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "all-in-Extrusion_4")], axis = model.selection("EDGE", "PartSet/OZ"), distance = "hauteur*0.5", keepSubResults = True)
-
-### Create Partition
-Partition_1_objects = [model.selection("COMPOUND", "all-in-Extrusion_1"),
- model.selection("COMPOUND", "all-in-Extrusion_2"),
- model.selection("COMPOUND", "all-in-Extrusion_3"),
- model.selection("COMPOUND", "all-in-Translation_1")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
-Partition_1.result().subResult(0).setName("Volumes")
-Partition_1.result().subResult(0).subResult(0).setName("Cylindre bas")
-Partition_1.result().subResult(0).subResult(1).setName("Cylindre haut")
-Partition_1.result().subResult(0).subResult(2).setName("Cube Creux")
-Partition_1.result().subResult(1).setName("Plaque")
-Partition_1.result().subResult(2).setName("Poutre 1")
-Partition_1.result().subResult(3).setName("Poutre 2")
-
-### Create Group
-Group_1_objects = [model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_4][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_3][Extrusion_2_1/From_Face]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_4][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_3][Cube Creux/Modified_Face&Extrusion_2_1/To_Face]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_4][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_1][Extrusion_2_1/From_Face]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_4][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_1][Cube Creux/Modified_Face&Extrusion_2_1/To_Face]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_3][Extrusion_2_1/From_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_2]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_3][Cube Creux/Modified_Face&Extrusion_2_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_2]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_1][Extrusion_2_1/From_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_2]"),
- model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_1][Cube Creux/Modified_Face&Extrusion_2_1/To_Face][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_2]"),
- model.selection("VERTEX", "[Extrusion_3_1/From_Edge]e[Cube Creux/Modified_Edge&Sketch_3/SketchLine_7_StartVertex]e"),
- model.selection("VERTEX", "[Extrusion_3_1/From_Edge]e[Cube Creux/Modified_Edge&Sketch_3/SketchLine_7_EndVertex]e"), model.filters(Part_1_doc, [model.addFilter(name = "OnShapeName", args = ["Cube"])])]
-Group_1 = model.addGroup(Part_1_doc, "Vertices", Group_1_objects)
-Group_1.setName("CubeVertices_1")
-Group_1.result().setName("CubeVertices_1")
-
-### Create Group
-Group_2_objects = [model.selection("EDGE", "(Cylindre haut/Generated_Edge&Extrusion_2_1/To_Face&Sketch_1/SketchCircle_1_2)([Cylindre haut/Modified_Face&Sketch_1/SketchCircle_1_2][Cylindre haut/Modified_Face&Extrusion_1_1/To_Face])"),
- model.selection("EDGE", "[Cylindre haut/Modified_Face&Sketch_1/SketchCircle_1_2][Cylindre haut/Modified_Face&Extrusion_1_1/To_Face]"),
- model.selection("EDGE", "Cylindre haut/Generated_Edge&Sketch_3/Sketch_3&Extrusion_1_1/To_Face"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&Sketch_3/SketchLine_7_EndVertex&new_weak_name_1"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&PartSet/Origin/Origin&new_weak_name_2"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&Sketch_3/SketchLine_7_StartVertex&new_weak_name_1"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&Sketch_3/SketchLine_7_EndVertex&new_weak_name_2"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&Sketch_3/SketchLine_7_StartVertex&new_weak_name_2"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&PartSet/Origin/Origin&new_weak_name_1"),
- model.selection("EDGE", "Cylindre haut/Modified_Edge&PartSet/Origin/Origin&new_weak_name_3"),
- model.selection("SOLID", "Cylindre bas"), model.filters(Part_1_doc, [model.addFilter(name = "OnShapeName", args = ["Cyl"])])]
-Group_2 = model.addGroup(Part_1_doc, "Edges", Group_2_objects)
-Group_2.setName("CylEdges_2")
-Group_2.result().setName("CylEdges_2")
-
-### Create Group
-Group_3 = model.addGroup(Part_1_doc, "Faces", [model.selection("FACE", "Plaque"), model.filters(Part_1_doc, [model.addFilter(name = "OnShapeName", args = ["Plaq"])])])
-Group_3.setName("Plaque_3")
-Group_3.result().setName("Plaque_3")
-
-### Create Group
-Group_4 = model.addGroup(Part_1_doc, "Solids", [model.selection("SOLID", "Cylindre haut"), model.selection("SOLID", "Cylindre bas"), model.filters(Part_1_doc, [model.addFilter(name = "OnShapeName", args = ["Cyl"])])])
-Group_4.setName("Cyllindres_4")
-Group_4.result().setName("Cyllindres_4")
-
-model.end()
-
-###
-### SHAPERSTUDY component
-###
-
-model.publishToShaperStudy()
-import SHAPERSTUDY
-Partition_1_1, CubeVertices_1, CylEdges_2, Plaque_3, Cyllindres_4, = SHAPERSTUDY.shape(model.featureStringId(Partition_1))
-
-if salome.sg.hasDesktop():
- salome.sg.updateObjBrowser()
FILTER_VOLUME_SIZE = "VolumeSize"
FILTER_FEATURE_EDGES = "FeatureEdges"
FILTER_CONTINUOUS_FACES= "ContinuousFaces"
-FILTER_ON_SHAPE_NAME = "OnShapeName"
# Reference data (supported filters) for each type of shape
Reference = {
- GeomAPI_Shape.VERTEX : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_LINE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID, FILTER_ON_SHAPE_NAME],
- GeomAPI_Shape.EDGE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_LINE, FILTER_ON_GEOMETRY, FILTER_ON_PLANE_SIDE, FILTER_OPPOSITE_TO_EDGE, FILTER_RELATIVE_TO_SOLID, FILTER_EDGE_SIZE, FILTER_FEATURE_EDGES, FILTER_ON_SHAPE_NAME],
- GeomAPI_Shape.WIRE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID, FILTER_ON_SHAPE_NAME],
- GeomAPI_Shape.FACE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_GEOMETRY, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID, FILTER_EXTERNAL_FACES, FILTER_HORIZONTAL_FACES, FILTER_VERTICAL_FACES, FILTER_CONNECTED_FACES, FILTER_FACE_SIZE, FILTER_CONTINUOUS_FACES, FILTER_ON_SHAPE_NAME],
- GeomAPI_Shape.SHELL : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID, FILTER_ON_SHAPE_NAME],
- GeomAPI_Shape.SOLID : [FILTER_BELONGS_TO, FILTER_ON_PLANE_SIDE, FILTER_VOLUME_SIZE, FILTER_ON_SHAPE_NAME],
+ GeomAPI_Shape.VERTEX : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_LINE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID],
+ GeomAPI_Shape.EDGE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_LINE, FILTER_ON_GEOMETRY, FILTER_ON_PLANE_SIDE, FILTER_OPPOSITE_TO_EDGE, FILTER_RELATIVE_TO_SOLID, FILTER_EDGE_SIZE, FILTER_FEATURE_EDGES],
+ GeomAPI_Shape.WIRE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID],
+ GeomAPI_Shape.FACE : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_GEOMETRY, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID, FILTER_EXTERNAL_FACES, FILTER_HORIZONTAL_FACES, FILTER_VERTICAL_FACES, FILTER_CONNECTED_FACES, FILTER_FACE_SIZE, FILTER_CONTINUOUS_FACES],
+ GeomAPI_Shape.SHELL : [FILTER_BELONGS_TO, FILTER_ON_PLANE, FILTER_ON_PLANE_SIDE, FILTER_RELATIVE_TO_SOLID],
+ GeomAPI_Shape.SOLID : [FILTER_BELONGS_TO, FILTER_ON_PLANE_SIDE, FILTER_VOLUME_SIZE],
}
model.begin()
- **Algorithm:**
- If a point of an edge is selected as an argument, the result is all faces that contain this argument.If a face is selected, the result is all faces that have shared edges or vertices with this selection.
- If “propagation” flag is enabled (it is disabled by default), the algorithm becomes recursive: all connected faces are added to the results. So, for the solid shape there will be all faces except internal-volumes faces, not connected to any external faces.
-
-**On shape name**
-
-- **Result type:** Any
-- **Arguments:** A string value, representing a pattern for searching by result name. The pattern can be the full name of result or its part. Pattern is case sensitive. There are several options for the pattern input:
-
- - **Pattern*** to search for results with names matching from the beginning strictly.
- - ***Pattern** to search for results with names matching from the ending strictly.
- - **Pattern** to search for results with names containing this regular expression.
- - ***Pattern*** to search for results with names containing this regular expression.
-- **Algorithm:**
- - Returns objects that contain a pattern in their names or subobjects of these objects.
- - For example, if we have in the result a shape with the name “cube” and we want to select all the edges according to the pattern "cube", then we will get all the edges of the object with name "cube".
- - There are two examples: selecting all edges belonging to objects from the result with a name starting with "Cyl" and selecting all vertices belonging to objects from the result with a name containing pattern "Cube":
-.. figure:: images/selection_byShapeName1.png
- :align: center
-
-.. figure:: images/selection_byShapeName2.png
- :align: center
+++ /dev/null
-<filter id="OnShapeName">
- <stringvalue id="OnShapeName__pattern" label="Search pattern:">
- </stringvalue>
-</filter>
TestFilter_FeatureEdges.py
TestFilter_ContinuousFaces.py
TestFilter_VolumeSize.py
- TestFilter_OnShapeName.py
)
