Test model for issue #1823

diff --git a/test.models/ecran.py b/test.models/ecran.py
new file mode 100644 (file)
index 0000000..1c2fdc5
--- /dev/null
+++ b/test.models/ecran.py
@@ -0,0 +1,1055 @@
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(55.1, 10.3, 55.1, 0.3)
+SketchLine_2 = Sketch_1.addLine(55.1, 0.3, 2.300000098190561, 0.3)
+SketchLine_2.setName("SketchLine_10")
+SketchLine_2.result().setName("SketchLine_10")
+SketchLine_3 = Sketch_1.addLine(55.1, 0.3, 0.3, 0.3)
+SketchLine_3.setName("SketchLine_2")
+SketchLine_3.result().setName("SketchLine_2")
+SketchLine_3.setAuxiliary(True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(0.3, 2.299999958617008, 0.3, 10.3)
+SketchLine_4.setName("SketchLine_11")
+SketchLine_4.result().setName("SketchLine_11")
+SketchLine_5 = Sketch_1.addLine(2.299981065494142, -1.390467145968888e-034, 55.4, -3.349267313974575e-033)
+SketchLine_5.setName("SketchLine_12")
+SketchLine_5.result().setName("SketchLine_12")
+SketchLine_6 = Sketch_1.addLine(0.3, 0.3, 0.3, 10.3)
+SketchLine_6.setName("SketchLine_3")
+SketchLine_6.result().setName("SketchLine_3")
+SketchLine_6.setAuxiliary(True)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(0, 10.3, 0, 2.300013086422291)
+SketchLine_7.setName("SketchLine_13")
+SketchLine_7.result().setName("SketchLine_13")
+SketchLine_8 = Sketch_1.addLine(0.3, 10.3, 0, 10.3)
+SketchLine_8.setName("SketchLine_4")
+SketchLine_8.result().setName("SketchLine_4")
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_9.setName("SketchLine_5")
+SketchLine_9.result().setName("SketchLine_5")
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_1.addLine(0, 10.3, 0, -3.349267313974575e-033)
+SketchLine_10.setName("SketchLine_6")
+SketchLine_10.result().setName("SketchLine_6")
+SketchLine_10.setAuxiliary(True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_1.addLine(0, -3.349267313974575e-033, 55.4, -3.349267313974575e-033)
+SketchLine_11.setName("SketchLine_7")
+SketchLine_11.result().setName("SketchLine_7")
+SketchLine_11.setAuxiliary(True)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchLine_12 = Sketch_1.addLine(55.4, -3.349267313974575e-033, 55.4, 10.3)
+SketchLine_12.setName("SketchLine_8")
+SketchLine_12.result().setName("SketchLine_8")
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_1.addLine(55.4, 10.3, 55.1, 10.3)
+SketchLine_13.setName("SketchLine_9")
+SketchLine_13.result().setName("SketchLine_9")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_13.endPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_13.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_12.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 10)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_13.result(), 0.3)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.result(), SketchLine_11.endPoint(), 0.3)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.result(), SketchLine_1.startPoint())
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_11.result(), 55.4)
+SketchConstraintLength_3.setName("SketchConstraintLength_5")
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 0.3)
+SketchArc_1 = Sketch_1.addArc(2.3, 2.3, 0.3, 2.299999958617008, 2.300000098190561, 0.3, False)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.endPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_4.endPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_6.result())
+SketchArc_2 = Sketch_1.addArc(2.3, 2.3, 0, 2.300013086422291, 2.299981065494142, -1.390467145968888e-034, False)
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_7.endPoint())
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_5.startPoint())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_5.result())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_7.result())
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_5.endPoint())
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_11.result())
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 2)
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 2.3)
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_9.startPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
+Extrusion_1.setName("Profil")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+SketchLine_14 = Sketch_2.addLine(149.5, -2.299981065494, 153.5, -2.299981065494142)
+SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result())
+SketchLine_15 = Sketch_2.addLine(153.5, -2.299981065494142, 153.5, 7.700018934505839)
+SketchLine_16 = Sketch_2.addLine(153.5, 7.700018934505839, 149.5, 7.700018934505839)
+SketchLine_17 = Sketch_2.addLine(149.5, 7.700018934505839, 149.5, -2.299981065494)
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_14.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_15.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_16.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_17.result())
+SketchLine_18 = Sketch_2.addLine(-149.5, -2.299981065494142, -153.5, -2.299981065494142)
+SketchLine_19 = Sketch_2.addLine(-153.5, -2.299981065494142, -153.5, 7.700018934505858)
+SketchLine_20 = Sketch_2.addLine(-153.5, 7.700018934505858, -149.5, 7.700018934505858)
+SketchLine_21 = Sketch_2.addLine(-149.5, 7.700018934505858, -149.5, -2.299981065494142)
+SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_18.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_19.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_20.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_21.result())
+SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_20.result())
+SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10)
+SketchConstraintLength_5.setName("SketchConstraintLength_6")
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299)
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result())
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"))
+SketchPoint_2.setName("SketchPoint_4")
+SketchPoint_2.result().setName("SketchPoint_4")
+SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates())
+SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_1.setName("Decoupe_Angle")
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.300000000000011)
+SketchLine_22.setName("SketchLine_29")
+SketchLine_22.result().setName("SketchLine_29")
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchPoint_3.setName("SketchPoint_5")
+SketchPoint_3.result().setName("SketchPoint_5")
+SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result())
+SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40")
+SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_23.setName("SketchLine_30")
+SketchLine_23.result().setName("SketchLine_30")
+SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result())
+SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_41")
+SketchLine_24 = Sketch_3.addLine(153.5, -8.300000000000011, 151.5, -10.3)
+SketchLine_24.setName("SketchLine_31")
+SketchLine_24.result().setName("SketchLine_31")
+SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.startPoint())
+SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_42")
+SketchLine_25 = Sketch_3.addLine(151.5, -10.3, 153.5, -10.3)
+SketchLine_25.setName("SketchLine_33")
+SketchLine_25.result().setName("SketchLine_33")
+SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
+SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_44")
+SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_25.endPoint())
+SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_45")
+SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_25.endPoint())
+SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.endPoint())
+SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_47")
+SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_25.result(), 2)
+SketchConstraintLength_6.setName("SketchConstraintLength_8")
+SketchConstraintAngle_1 = Sketch_3.setAngleBackward(SketchLine_24.result(), SketchLine_25.result(), 45)
+SketchConstraintAngle_1.setName("SketchConstraintAngle_2")
+SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_8"))
+SketchLine_26.setName("SketchLine_34")
+SketchLine_26.result().setName("SketchLine_34")
+SketchConstraintMirror_1_objects = [SketchLine_22.result(), SketchLine_25.result(), SketchLine_24.result()]
+SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_26.result(), SketchConstraintMirror_1_objects)
+[SketchLine_27, SketchLine_28, SketchLine_29] = SketchConstraintMirror_1.mirrored()
+SketchLine_29.setName("SketchLine_32")
+SketchLine_29.result().setName("SketchLine_32")
+model.do()
+Sketch_3.setName("Sketch_4")
+Sketch_3.result().setName("Sketch_4")
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_2.setName("Chamfrein_1")
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"))
+SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.300000000000003)
+SketchLine_30.setName("SketchLine_35")
+SketchLine_30.result().setName("SketchLine_35")
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5"))
+SketchPoint_4.setName("SketchPoint_6")
+SketchPoint_4.result().setName("SketchPoint_6")
+SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result())
+SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
+SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_10&ExtrusionCut_1_1/Modfied_6"))
+SketchLine_31.setName("SketchLine_36")
+SketchLine_31.result().setName("SketchLine_36")
+SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
+SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_48")
+SketchLine_32 = Sketch_4.addLine(-149.5, 8.300000000000003, -147.5, 10.3)
+SketchLine_32.setName("SketchLine_37")
+SketchLine_32.result().setName("SketchLine_37")
+SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_32.startPoint())
+SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_49")
+SketchLine_33 = Sketch_4.addLine(-147.5, 10.3, -149.5, 10.3)
+SketchLine_33.setName("SketchLine_38")
+SketchLine_33.result().setName("SketchLine_38")
+SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_50")
+SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_33.endPoint())
+SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_33.endPoint())
+SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_33.endPoint())
+SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_53")
+SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_33.result())
+SketchConstraintAngle_2 = Sketch_4.setAngleBackward(SketchLine_30.result(), SketchLine_32.result(), 45)
+SketchConstraintAngle_2.setName("SketchConstraintAngle_3")
+SketchConstraintLength_7 = Sketch_4.setLength(SketchLine_33.result(), 2)
+SketchLine_34 = Sketch_4.addLine(0, 0, 0, 100)
+SketchLine_34.setName("SketchLine_39")
+SketchLine_34.result().setName("SketchLine_39")
+SketchConstraintMirror_2_objects = [SketchLine_32.result(), SketchLine_33.result(), SketchLine_30.result()]
+SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_34.result(), SketchConstraintMirror_2_objects)
+[SketchLine_35, SketchLine_36, SketchLine_37] = SketchConstraintMirror_2.mirrored()
+SketchLine_37.setName("SketchLine_42")
+SketchLine_37.result().setName("SketchLine_42")
+SketchLine_36.setName("SketchLine_41")
+SketchLine_36.result().setName("SketchLine_41")
+SketchLine_35.setName("SketchLine_40")
+SketchLine_35.result().setName("SketchLine_40")
+SketchConstraintRigid_1 = Sketch_4.setFixed(SketchLine_34.result())
+SketchConstraintRigid_1.setName("SketchConstraintRigid_12")
+SketchLine_38 = Sketch_4.addLine(153.5, 5.5, -100.5, 5.5)
+SketchLine_38.setName("SketchLine_43")
+SketchLine_38.result().setName("SketchLine_43")
+SketchLine_38.setAuxiliary(True)
+SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_38.result())
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_2"))
+SketchLine_39 = SketchProjection_1.createdFeature()
+SketchLine_39.setName("SketchLine_44")
+SketchLine_39.result().setName("SketchLine_44")
+SketchConstraintDistance_3 = Sketch_4.setDistance(SketchLine_38.result(), SketchAPI_Line(SketchLine_39).endPoint(), 5.5)
+SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_38.startPoint(), SketchLine_39.result())
+SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_54")
+SketchCircle_1 = Sketch_4.addCircle(100.5, 5.5, 1.5)
+SketchConstraintRadius_3 = Sketch_4.setRadius(SketchCircle_1.results()[1], 1.5)
+SketchCircle_2 = Sketch_4.addCircle(33.5, 5.5, 1.5)
+SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchCircle_2.center(), SketchLine_38.result())
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_55")
+SketchCircle_3 = Sketch_4.addCircle(-33.5, 5.5, 1.506545921898)
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchCircle_3.center(), SketchLine_38.result())
+SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_56")
+SketchCircle_4 = Sketch_4.addCircle(-100.5, 5.5, 1.506545921898)
+SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchCircle_4.center(), SketchLine_38.result())
+SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_57")
+SketchConstraintEqual_2 = Sketch_4.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
+SketchConstraintEqual_3 = Sketch_4.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
+SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchCircle_1.center(), SketchLine_38.result())
+SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_58")
+SketchConstraintDistance_4 = Sketch_4.setDistance(SketchCircle_4.center(), SketchCircle_3.center(), 67)
+SketchConstraintDistance_5 = Sketch_4.setDistance(SketchCircle_3.center(), SketchCircle_2.center(), 67)
+SketchConstraintDistance_6 = Sketch_4.setDistance(SketchCircle_2.center(), SketchCircle_1.center(), 67)
+SketchConstraintDistance_7 = Sketch_4.setDistance(SketchLine_39.result(), SketchCircle_1.center(), 53)
+SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_38.endPoint(), SketchCircle_4.center())
+SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59")
+model.do()
+Sketch_4.setName("Sketch_5")
+Sketch_4.result().setName("Sketch_5")
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_8"))
+SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
+SketchLine_40.setName("SketchLine_58")
+SketchLine_40.result().setName("SketchLine_58")
+SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702)
+SketchLine_41.setName("SketchLine_57")
+SketchLine_41.result().setName("SketchLine_57")
+SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_8"))
+SketchLine_42.setName("SketchLine_46")
+SketchLine_42.result().setName("SketchLine_46")
+SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702)
+SketchLine_43.setName("SketchLine_45")
+SketchLine_43.result().setName("SketchLine_45")
+SketchLine_43.setAuxiliary(True)
+SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_42.result())
+SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_60")
+SketchLine_44 = Sketch_5.addLine(153.5, -45.04999053274702, 153.5, -37.04999053274702)
+SketchLine_44.setName("SketchLine_47")
+SketchLine_44.result().setName("SketchLine_47")
+SketchLine_45 = Sketch_5.addLine(150.8000000000001, -14.54997391609652, 150.8000000000001, -19.54999029833178)
+SketchLine_45.setName("SketchLine_61")
+SketchLine_45.result().setName("SketchLine_61")
+SketchLine_46 = Sketch_5.addLine(153.5, -13.04999053274714, 152.2999838654776, -13.04999053274697)
+SketchLine_46.setName("SketchLine_60")
+SketchLine_46.result().setName("SketchLine_60")
+SketchLine_47 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8, -45.04999053274702)
+SketchLine_47.setName("SketchLine_49")
+SketchLine_47.result().setName("SketchLine_49")
+SketchLine_47.setAuxiliary(True)
+SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchLine_47.endPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_62")
+SketchLine_48 = Sketch_5.addLine(153.5, -37.04999053274702, 150.8, -37.04999053274702)
+SketchLine_48.setAuxiliary(True)
+SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_44.endPoint(), SketchLine_48.startPoint())
+SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_63")
+SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchLine_48.endPoint(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_64")
+SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_43.result())
+SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_44.result())
+SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_48.result())
+SketchConstraintVertical_10 = Sketch_5.setVertical(SketchLine_47.result())
+SketchLine_49 = Sketch_5.addLine(153.5, -37.04999053274702, 152.2999989299055, -37.04999053274738)
+SketchLine_49.setName("SketchLine_62")
+SketchLine_49.result().setName("SketchLine_62")
+SketchLine_50 = Sketch_5.addLine(150.8, -38.54997391988981, 150.8000000000001, -43.54998998548124)
+SketchLine_50.setName("SketchLine_63")
+SketchLine_50.result().setName("SketchLine_63")
+SketchLine_51 = Sketch_5.addLine(150.7999999999999, -21.04999053274714, 153.5, -21.04999053274714)
+SketchLine_51.setName("SketchLine_50")
+SketchLine_51.result().setName("SketchLine_50")
+SketchLine_51.setAuxiliary(True)
+SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_42.result())
+SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_65")
+SketchLine_52 = Sketch_5.addLine(153.5, -21.04999053274714, 153.5, -13.04999053274714)
+SketchLine_52.setName("SketchLine_51")
+SketchLine_52.result().setName("SketchLine_51")
+SketchLine_53 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.7999999999999, -21.04999053274714)
+SketchLine_53.setAuxiliary(True)
+SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_53.endPoint(), SketchLine_51.startPoint())
+SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_52.startPoint())
+SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_67")
+SketchLine_54 = Sketch_5.addLine(153.5, -13.04999053274714, 150.7999999999999, -13.04999053274714)
+SketchLine_54.setName("SketchLine_52")
+SketchLine_54.result().setName("SketchLine_52")
+SketchLine_54.setAuxiliary(True)
+SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint())
+SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_68")
+SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_54.endPoint(), SketchLine_53.startPoint())
+SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_69")
+SketchConstraintHorizontal_13 = Sketch_5.setHorizontal(SketchLine_51.result())
+SketchConstraintVertical_11 = Sketch_5.setVertical(SketchLine_52.result())
+SketchConstraintHorizontal_14 = Sketch_5.setHorizontal(SketchLine_54.result())
+SketchConstraintVertical_12 = Sketch_5.setVertical(SketchLine_53.result())
+SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_47.result(), SketchLine_53.endPoint())
+SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_70")
+SketchConstraintLength_8 = Sketch_5.setLength(SketchLine_43.result(), 2.7)
+SketchConstraintLength_8.setName("SketchConstraintLength_9")
+SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8)
+SketchConstraintLength_9.setName("SketchConstraintLength_10")
+SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result())
+SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707)
+SketchPoint_5.setName("SketchPoint_7")
+SketchPoint_5.result().setName("SketchPoint_7")
+SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result())
+SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707)
+SketchLine_55.setName("SketchLine_54")
+SketchLine_55.result().setName("SketchLine_54")
+SketchLine_55.setAuxiliary(True)
+SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint())
+SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71")
+SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_8"))
+SketchLine_56.setName("SketchLine_55")
+SketchLine_56.result().setName("SketchLine_55")
+SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result())
+SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_72")
+SketchConstraintHorizontal_15 = Sketch_5.setHorizontal(SketchLine_55.result())
+SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_48.result(), SketchPoint_5.coordinates(), 8.199999999999999)
+SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_51.result(), SketchPoint_5.coordinates(), 7.8)
+SketchArc_3 = Sketch_5.addArc(152.3, -43.54999053274682, 150.8000000000001, -43.54998998548124, 152.2999838292651, -45.04999053274704, False)
+SketchLine_57 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8000000000001, -43.54998998548124)
+SketchLine_57.setName("SketchLine_56")
+SketchLine_57.result().setName("SketchLine_56")
+SketchLine_57.setAuxiliary(True)
+SketchConstraintCoincidence_68 = Sketch_5.setCoincident(SketchArc_3.startPoint(), SketchLine_57.endPoint())
+SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchArc_3.endPoint(), SketchLine_41.startPoint())
+SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_74")
+SketchConstraintTangent_5 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_57.result())
+SketchConstraintTangent_6 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_41.result())
+SketchConstraintCoincidence_70 = Sketch_5.setCoincident(SketchLine_47.startPoint(), SketchLine_57.startPoint())
+SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_75")
+SketchConstraintCoincidence_71 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_41.endPoint())
+SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_76")
+SketchConstraintCoincidence_72 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_47.result())
+SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_77")
+SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchLine_43.result())
+SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_78")
+SketchArc_4 = Sketch_5.addArc(152.3, -19.54999053274696, 150.8000000000001, -19.54999029833178, 152.2999838762584, -21.04999053274691, False)
+SketchLine_58 = Sketch_5.addLine(150.7999999999999, -13.04999053274714, 150.8000000000001, -19.54999029833178)
+SketchLine_58.setName("SketchLine_59")
+SketchLine_58.result().setName("SketchLine_59")
+SketchLine_58.setAuxiliary(True)
+SketchConstraintCoincidence_74 = Sketch_5.setCoincident(SketchArc_4.startPoint(), SketchLine_58.endPoint())
+SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_79")
+SketchConstraintCoincidence_75 = Sketch_5.setCoincident(SketchArc_4.endPoint(), SketchLine_40.startPoint())
+SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_80")
+SketchConstraintTangent_7 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_40.result())
+SketchConstraintTangent_8 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_58.result())
+SketchConstraintCoincidence_76 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_40.endPoint())
+SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_81")
+SketchConstraintCoincidence_77 = Sketch_5.setCoincident(SketchLine_53.startPoint(), SketchLine_58.startPoint())
+SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_82")
+SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_40.startPoint(), SketchLine_51.result())
+SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_83")
+SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_53.result())
+SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_84")
+SketchArc_5 = Sketch_5.addArc(152.2999999999999, -14.54999053274707, 152.2999838654776, -13.04999053274697, 150.8000000000001, -14.54997391609652, False)
+SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchArc_5.startPoint(), SketchLine_46.endPoint())
+SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_85")
+SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_5.endPoint(), SketchLine_45.startPoint())
+SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_86")
+SketchConstraintTangent_9 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_46.result())
+SketchConstraintTangent_10 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_45.result())
+SketchConstraintCoincidence_82 = Sketch_5.setCoincident(SketchLine_54.startPoint(), SketchLine_46.startPoint())
+SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_87")
+SketchConstraintCoincidence_83 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_45.endPoint())
+SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_88")
+SketchConstraintCoincidence_84 = Sketch_5.setCoincident(SketchLine_46.endPoint(), SketchLine_54.result())
+SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_89")
+SketchConstraintCoincidence_85 = Sketch_5.setCoincident(SketchLine_45.startPoint(), SketchLine_58.result())
+SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_90")
+SketchArc_6 = Sketch_5.addArc(152.3, -38.54999053274739, 152.2999989299055, -37.04999053274738, 150.8, -38.54997391988981, False)
+SketchConstraintCoincidence_86 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_49.endPoint())
+SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_91")
+SketchConstraintCoincidence_87 = Sketch_5.setCoincident(SketchArc_6.endPoint(), SketchLine_50.startPoint())
+SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_92")
+SketchConstraintTangent_11 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_49.result())
+SketchConstraintTangent_12 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_50.result())
+SketchConstraintCoincidence_88 = Sketch_5.setCoincident(SketchLine_48.startPoint(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_93")
+SketchConstraintCoincidence_89 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_50.endPoint())
+SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_94")
+SketchConstraintCoincidence_90 = Sketch_5.setCoincident(SketchLine_49.endPoint(), SketchLine_48.result())
+SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_95")
+SketchConstraintCoincidence_91 = Sketch_5.setCoincident(SketchLine_50.startPoint(), SketchLine_57.result())
+SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_96")
+SketchConstraintRadius_4 = Sketch_5.setRadius(SketchArc_3.results()[1], 1.5)
+SketchConstraintEqual_5 = Sketch_5.setEqual(SketchArc_6.results()[1], SketchArc_3.results()[1])
+SketchConstraintEqual_6 = Sketch_5.setEqual(SketchArc_3.results()[1], SketchArc_4.results()[1])
+SketchConstraintEqual_7 = Sketch_5.setEqual(SketchArc_4.results()[1], SketchArc_5.results()[1])
+SketchLine_59 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_59.setName("SketchLine_64")
+SketchLine_59.result().setName("SketchLine_64")
+SketchConstraintMirror_3_objects = [SketchArc_3.results()[1], SketchArc_6.results()[1], SketchLine_49.result(), SketchLine_50.result(), SketchLine_44.result(), SketchLine_41.result(), SketchLine_43.result(), SketchLine_57.result(), SketchLine_48.result(), SketchLine_47.result()]
+SketchConstraintMirror_3 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_3_objects)
+[SketchArc_7, SketchArc_8, SketchLine_60, SketchLine_61, SketchLine_62, SketchLine_63, SketchLine_64, SketchLine_65, SketchLine_66, SketchLine_67] = SketchConstraintMirror_3.mirrored()
+SketchLine_67.setName("SketchLine_72")
+SketchLine_67.result().setName("SketchLine_72")
+SketchLine_66.setName("SketchLine_71")
+SketchLine_66.result().setName("SketchLine_71")
+SketchLine_65.setName("SketchLine_70")
+SketchLine_65.result().setName("SketchLine_70")
+SketchLine_64.setName("SketchLine_69")
+SketchLine_64.result().setName("SketchLine_69")
+SketchLine_63.setName("SketchLine_68")
+SketchLine_63.result().setName("SketchLine_68")
+SketchLine_62.setName("SketchLine_67")
+SketchLine_62.result().setName("SketchLine_67")
+SketchLine_61.setName("SketchLine_66")
+SketchLine_61.result().setName("SketchLine_66")
+SketchLine_60.setName("SketchLine_65")
+SketchLine_60.result().setName("SketchLine_65")
+SketchConstraintMirror_4_objects = [SketchArc_4.results()[1], SketchArc_5.results()[1], SketchLine_52.result(), SketchLine_45.result(), SketchLine_46.result(), SketchLine_40.result(), SketchLine_54.result(), SketchLine_58.result(), SketchLine_51.result(), SketchLine_53.result()]
+SketchConstraintMirror_4 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_4_objects)
+[SketchArc_9, SketchArc_10, SketchLine_68, SketchLine_69, SketchLine_70, SketchLine_71, SketchLine_72, SketchLine_73, SketchLine_74, SketchLine_75] = SketchConstraintMirror_4.mirrored()
+SketchLine_75.setName("SketchLine_80")
+SketchLine_75.result().setName("SketchLine_80")
+SketchLine_74.setName("SketchLine_79")
+SketchLine_74.result().setName("SketchLine_79")
+SketchLine_73.setName("SketchLine_78")
+SketchLine_73.result().setName("SketchLine_78")
+SketchLine_72.setName("SketchLine_77")
+SketchLine_72.result().setName("SketchLine_77")
+SketchLine_71.setName("SketchLine_76")
+SketchLine_71.result().setName("SketchLine_76")
+SketchLine_70.setName("SketchLine_75")
+SketchLine_70.result().setName("SketchLine_75")
+SketchLine_69.setName("SketchLine_74")
+SketchLine_69.result().setName("SketchLine_74")
+SketchLine_68.setName("SketchLine_73")
+SketchLine_68.result().setName("SketchLine_73")
+model.do()
+Sketch_5.setName("Sketch_6")
+Sketch_5.result().setName("Sketch_6")
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
+SketchArc_11 = Sketch_6.addArc(44.88999999999999, -23.54999053274703, 43.88999999999999, -23.54999053274703, 44.88999999999999, -22.54999053274703, False)
+SketchArc_12 = Sketch_6.addArc(44.88999999999999, -13.54999053274703, 44.88999999999999, -14.54999053274703, 43.88999999999999, -13.54999053274703, False)
+SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False)
+SketchArc_13.setName("SketchArc_14")
+SketchArc_13.result().setName("SketchArc_14")
+SketchArc_13.results()[1].setName("SketchArc_14_2")
+SketchLine_76 = Sketch_6.addLine(6.890000000000002, -23.54999053274703, 43.88999999999999, -23.54999053274703)
+SketchLine_76.setName("SketchLine_81")
+SketchLine_76.result().setName("SketchLine_81")
+SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint())
+SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
+SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.88999999999999, -13.54999053274703)
+SketchLine_77.setName("SketchLine_82")
+SketchLine_77.result().setName("SketchLine_82")
+SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint())
+SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
+SketchLine_78 = Sketch_6.addLine(44.88999999999999, -22.54999053274703, 44.88999999999999, -14.54999053274703)
+SketchLine_78.setName("SketchLine_83")
+SketchLine_78.result().setName("SketchLine_83")
+SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint())
+SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
+SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703)
+SketchLine_79.setName("SketchLine_84")
+SketchLine_79.result().setName("SketchLine_84")
+SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint())
+SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_101")
+SketchConstraintHorizontal_16 = Sketch_6.setHorizontal(SketchLine_76.result())
+SketchConstraintHorizontal_17 = Sketch_6.setHorizontal(SketchLine_77.result())
+SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_79.result())
+SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_78.result())
+SketchConstraintCoincidence_96 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_102")
+SketchConstraintCoincidence_97 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_77.endPoint())
+SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_104")
+SketchConstraintCoincidence_98 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_78.result())
+SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_105")
+SketchConstraintCoincidence_99 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_76.result())
+SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_106")
+SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_11.results()[1], 1)
+SketchConstraintCoincidence_100 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_78.result())
+SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_107")
+SketchConstraintCoincidence_101 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_77.result())
+SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_108")
+SketchConstraintCoincidence_102 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_77.result())
+SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_109")
+SketchConstraintEqual_8 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1])
+SketchConstraintEqual_9 = Sketch_6.setEqual(SketchArc_13.results()[1], SketchArc_11.results()[1])
+SketchConstraintEqual_9.setName("SketchConstraintEqual_10")
+SketchConstraintCoincidence_103 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_79.result())
+SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_112")
+SketchConstraintDistance_10 = Sketch_6.setDistance(SketchLine_76.result(), SketchArc_13.startPoint(), 10)
+SketchConstraintDistance_11 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_78.result(), 39)
+SketchLine_80 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_80.setName("SketchLine_85")
+SketchLine_80.result().setName("SketchLine_85")
+SketchConstraintDistance_12 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_80.result(), 5.89)
+SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLine_54"))
+SketchLine_81.setName("SketchLine_86")
+SketchLine_81.result().setName("SketchLine_86")
+SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3)
+SketchArc_14 = Sketch_6.addArc(5.890000000000002, -23.54999053274703, 5.89, -22.54999053274703, 6.890000000000002, -23.54999053274703, False)
+SketchArc_14.setName("SketchArc_15")
+SketchArc_14.result().setName("SketchArc_15")
+SketchArc_14.results()[1].setName("SketchArc_15_2")
+SketchConstraintCoincidence_104 = Sketch_6.setCoincident(SketchLine_79.startPoint(), SketchArc_14.startPoint())
+SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_110")
+SketchConstraintCoincidence_105 = Sketch_6.setCoincident(SketchArc_14.endPoint(), SketchLine_76.startPoint())
+SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_111")
+SketchConstraintCoincidence_106 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_76.result())
+SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_113")
+SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_79.result())
+SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114")
+SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1])
+SketchConstraintEqual_10.setName("SketchConstraintEqual_11")
+SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704)
+SketchPoint_6.setName("SketchPoint_8")
+SketchPoint_6.result().setName("SketchPoint_8")
+SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703)
+SketchPoint_7.setName("SketchPoint_9")
+SketchPoint_7.result().setName("SketchPoint_9")
+SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702)
+SketchPoint_8.setName("SketchPoint_10")
+SketchPoint_8.result().setName("SketchPoint_10")
+SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates())
+SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_115")
+SketchConstraintCoincidence_109 = Sketch_6.setCoincident(SketchLine_81.result(), SketchPoint_6.coordinates())
+SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_116")
+SketchConstraintCoincidence_110 = Sketch_6.setCoincident(SketchPoint_7.coordinates(), SketchLine_81.result())
+SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_117")
+SketchConstraintCoincidence_111 = Sketch_6.setCoincident(SketchPoint_8.coordinates(), SketchLine_81.result())
+SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_118")
+SketchConstraintDistance_14 = Sketch_6.setDistance(SketchPoint_7.coordinates(), SketchLine_80.result(), "56.66-5.89")
+SketchConstraintDistance_15 = Sketch_6.setDistance(SketchLine_80.result(), SketchPoint_8.coordinates(), "107.43-5.89")
+SketchMultiTranslation_1_objects = [SketchArc_13.results()[1], SketchArc_14.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchLine_78.result(), SketchLine_76.result(), SketchLine_77.result(), SketchLine_79.result()]
+SketchMultiTranslation_1 = Sketch_6.addTranslation(SketchMultiTranslation_1_objects, SketchPoint_6.coordinates(), SketchPoint_7.coordinates(), 2)
+[SketchArc_15, SketchArc_16, SketchArc_17, SketchArc_18, SketchLine_82, SketchLine_83, SketchLine_84, SketchLine_85] = SketchMultiTranslation_1.translated()
+SketchLine_85.setName("SketchLine_90")
+SketchLine_85.result().setName("SketchLine_90")
+SketchLine_84.setName("SketchLine_89")
+SketchLine_84.result().setName("SketchLine_89")
+SketchLine_83.setName("SketchLine_88")
+SketchLine_83.result().setName("SketchLine_88")
+SketchLine_82.setName("SketchLine_87")
+SketchLine_82.result().setName("SketchLine_87")
+SketchArc_18.setName("SketchArc_19")
+SketchArc_18.result().setName("SketchArc_19")
+SketchArc_18.results()[1].setName("SketchArc_19_2")
+SketchArc_17.setName("SketchArc_18")
+SketchArc_17.result().setName("SketchArc_18")
+SketchArc_17.results()[1].setName("SketchArc_18_2")
+SketchArc_16.setName("SketchArc_17")
+SketchArc_16.result().setName("SketchArc_17")
+SketchArc_16.results()[1].setName("SketchArc_17_2")
+SketchArc_15.setName("SketchArc_16")
+SketchArc_15.result().setName("SketchArc_16")
+SketchArc_15.results()[1].setName("SketchArc_16_2")
+SketchMultiTranslation_2_objects = [SketchArc_12.results()[1], SketchArc_13.results()[1], SketchArc_11.results()[1], SketchArc_14.results()[1], SketchLine_79.result(), SketchLine_78.result(), SketchLine_77.result(), SketchLine_76.result()]
+SketchMultiTranslation_2 = Sketch_6.addTranslation(SketchMultiTranslation_2_objects, SketchPoint_6.coordinates(), SketchPoint_8.coordinates(), 2)
+[SketchArc_19, SketchArc_20, SketchArc_21, SketchArc_22, SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89] = SketchMultiTranslation_2.translated()
+SketchLine_89.setName("SketchLine_94")
+SketchLine_89.result().setName("SketchLine_94")
+SketchLine_88.setName("SketchLine_93")
+SketchLine_88.result().setName("SketchLine_93")
+SketchLine_87.setName("SketchLine_92")
+SketchLine_87.result().setName("SketchLine_92")
+SketchLine_86.setName("SketchLine_91")
+SketchLine_86.result().setName("SketchLine_91")
+SketchArc_22.setName("SketchArc_23")
+SketchArc_22.result().setName("SketchArc_23")
+SketchArc_22.results()[1].setName("SketchArc_23_2")
+SketchArc_21.setName("SketchArc_22")
+SketchArc_21.result().setName("SketchArc_22")
+SketchArc_21.results()[1].setName("SketchArc_22_2")
+SketchArc_20.setName("SketchArc_21")
+SketchArc_20.result().setName("SketchArc_21")
+SketchArc_20.results()[1].setName("SketchArc_21_2")
+SketchArc_19.setName("SketchArc_20")
+SketchArc_19.result().setName("SketchArc_20")
+SketchArc_19.results()[1].setName("SketchArc_20_2")
+SketchConstraintMirror_5_objects = [SketchArc_18.results()[1], SketchArc_17.results()[1], SketchArc_16.results()[1], SketchArc_15.results()[1], SketchArc_22.results()[1], SketchArc_20.results()[1], SketchArc_11.results()[1], SketchArc_12.results()[1], SketchArc_21.results()[1], SketchArc_19.results()[1], SketchArc_14.results()[1], SketchArc_13.results()[1], SketchLine_77.result(), SketchLine_78.result(), SketchLine_79.result(), SketchLine_85.result(), SketchLine_87.result(), SketchLine_82.result(), SketchLine_84.result(), SketchLine_86.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_76.result(), SketchLine_89.result()]
+SketchConstraintMirror_5 = Sketch_6.addMirror(SketchLine_80.result(), SketchConstraintMirror_5_objects)
+[SketchArc_23, SketchArc_24, SketchArc_25, SketchArc_26, SketchArc_27, SketchArc_28, SketchArc_29, SketchArc_30, SketchArc_31, SketchArc_32, SketchArc_33, SketchArc_34, SketchLine_90, SketchLine_91, SketchLine_92, SketchLine_93, SketchLine_94, SketchLine_95, SketchLine_96, SketchLine_97, SketchLine_98, SketchLine_99, SketchLine_100, SketchLine_101] = SketchConstraintMirror_5.mirrored()
+SketchLine_101.setName("SketchLine_106")
+SketchLine_101.result().setName("SketchLine_106")
+SketchLine_100.setName("SketchLine_105")
+SketchLine_100.result().setName("SketchLine_105")
+SketchLine_99.setName("SketchLine_104")
+SketchLine_99.result().setName("SketchLine_104")
+SketchLine_98.setName("SketchLine_103")
+SketchLine_98.result().setName("SketchLine_103")
+SketchLine_97.setName("SketchLine_102")
+SketchLine_97.result().setName("SketchLine_102")
+SketchLine_96.setName("SketchLine_101")
+SketchLine_96.result().setName("SketchLine_101")
+SketchLine_95.setName("SketchLine_100")
+SketchLine_95.result().setName("SketchLine_100")
+SketchLine_94.setName("SketchLine_99")
+SketchLine_94.result().setName("SketchLine_99")
+SketchLine_93.setName("SketchLine_98")
+SketchLine_93.result().setName("SketchLine_98")
+SketchLine_92.setName("SketchLine_97")
+SketchLine_92.result().setName("SketchLine_97")
+SketchLine_91.setName("SketchLine_96")
+SketchLine_91.result().setName("SketchLine_96")
+SketchLine_90.setName("SketchLine_95")
+SketchLine_90.result().setName("SketchLine_95")
+SketchArc_34.setName("SketchArc_35")
+SketchArc_34.result().setName("SketchArc_35")
+SketchArc_34.results()[1].setName("SketchArc_35_2")
+SketchArc_33.setName("SketchArc_34")
+SketchArc_33.result().setName("SketchArc_34")
+SketchArc_33.results()[1].setName("SketchArc_34_2")
+SketchArc_32.setName("SketchArc_33")
+SketchArc_32.result().setName("SketchArc_33")
+SketchArc_32.results()[1].setName("SketchArc_33_2")
+SketchArc_31.setName("SketchArc_32")
+SketchArc_31.result().setName("SketchArc_32")
+SketchArc_31.results()[1].setName("SketchArc_32_2")
+SketchArc_30.setName("SketchArc_31")
+SketchArc_30.result().setName("SketchArc_31")
+SketchArc_30.results()[1].setName("SketchArc_31_2")
+SketchArc_29.setName("SketchArc_30")
+SketchArc_29.result().setName("SketchArc_30")
+SketchArc_29.results()[1].setName("SketchArc_30_2")
+SketchArc_28.setName("SketchArc_29")
+SketchArc_28.result().setName("SketchArc_29")
+SketchArc_28.results()[1].setName("SketchArc_29_2")
+SketchArc_27.setName("SketchArc_28")
+SketchArc_27.result().setName("SketchArc_28")
+SketchArc_27.results()[1].setName("SketchArc_28_2")
+SketchArc_26.setName("SketchArc_27")
+SketchArc_26.result().setName("SketchArc_27")
+SketchArc_26.results()[1].setName("SketchArc_27_2")
+SketchArc_25.setName("SketchArc_26")
+SketchArc_25.result().setName("SketchArc_26")
+SketchArc_25.results()[1].setName("SketchArc_26_2")
+SketchArc_24.setName("SketchArc_25")
+SketchArc_24.result().setName("SketchArc_25")
+SketchArc_24.results()[1].setName("SketchArc_25_2")
+SketchArc_23.setName("SketchArc_24")
+SketchArc_23.result().setName("SketchArc_24")
+SketchArc_23.results()[1].setName("SketchArc_24_2")
+SketchPoint_9 = Sketch_6.addPoint(1.460819920296274e-014, -49.84999053274704)
+SketchPoint_9.setName("SketchPoint_11")
+SketchPoint_9.result().setName("SketchPoint_11")
+SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result())
+SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_119")
+SketchConstraintDistance_16 = Sketch_6.setDistance(SketchPoint_9.coordinates(), SketchLine_81.result(), "10+5.3+5.7")
+SketchMultiTranslation_3_objects = [SketchArc_13.results()[1], SketchArc_34.results()[1], SketchArc_14.results()[1], SketchArc_33.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchArc_30.results()[1], SketchArc_29.results()[1], SketchArc_15.results()[1], SketchArc_16.results()[1], SketchArc_26.results()[1], SketchArc_25.results()[1], SketchArc_17.results()[1], SketchArc_18.results()[1], SketchArc_24.results()[1], SketchArc_23.results()[1], SketchArc_20.results()[1], SketchArc_22.results()[1], SketchArc_28.results()[1], SketchArc_27.results()[1], SketchArc_19.results()[1], SketchArc_21.results()[1], SketchArc_32.results()[1], SketchArc_31.results()[1], SketchLine_82.result(), SketchLine_77.result(), SketchLine_97.result(), SketchLine_94.result(), SketchLine_101.result(), SketchLine_99.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_89.result(), SketchLine_86.result(), SketchLine_85.result(), SketchLine_100.result(), SketchLine_79.result(), SketchLine_92.result(), SketchLine_87.result(), SketchLine_91.result(), SketchLine_84.result(), SketchLine_96.result(), SketchLine_95.result(), SketchLine_93.result(), SketchLine_78.result(), SketchLine_98.result(), SketchLine_76.result(), SketchLine_90.result()]
+SketchMultiTranslation_3 = Sketch_6.addTranslation(SketchMultiTranslation_3_objects, SketchPoint_6.coordinates(), SketchPoint_9.coordinates(), 2)
+[SketchArc_35, SketchArc_34, SketchArc_36, SketchArc_37, SketchArc_33, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_30, SketchArc_41, SketchArc_29, SketchArc_42, SketchArc_15, SketchArc_43, SketchArc_16, SketchArc_44, SketchArc_26, SketchArc_45, SketchArc_25, SketchArc_46, SketchArc_17, SketchArc_47, SketchArc_18, SketchArc_48, SketchArc_24, SketchArc_49, SketchArc_23, SketchArc_50, SketchArc_20, SketchArc_51, SketchArc_22, SketchArc_52, SketchArc_28, SketchArc_53, SketchArc_27, SketchArc_54, SketchArc_19, SketchArc_55, SketchArc_21, SketchArc_56, SketchArc_32, SketchArc_57, SketchArc_31, SketchArc_58, SketchLine_82, SketchLine_102, SketchLine_103, SketchLine_97, SketchLine_104, SketchLine_94, SketchLine_105, SketchLine_101, SketchLine_106, SketchLine_99, SketchLine_107, SketchLine_83, SketchLine_108, SketchLine_88, SketchLine_109, SketchLine_89, SketchLine_110, SketchLine_86, SketchLine_111, SketchLine_85, SketchLine_112, SketchLine_100, SketchLine_113, SketchLine_114, SketchLine_92, SketchLine_115, SketchLine_87, SketchLine_116, SketchLine_91, SketchLine_117, SketchLine_84, SketchLine_118, SketchLine_96, SketchLine_119, SketchLine_95, SketchLine_120, SketchLine_93, SketchLine_121, SketchLine_122, SketchLine_98, SketchLine_123, SketchLine_124, SketchLine_90, SketchLine_125] = SketchMultiTranslation_3.translated()
+SketchLine_125.setName("SketchLine_130")
+SketchLine_125.result().setName("SketchLine_130")
+SketchLine_124.setName("SketchLine_129")
+SketchLine_124.result().setName("SketchLine_129")
+SketchLine_123.setName("SketchLine_128")
+SketchLine_123.result().setName("SketchLine_128")
+SketchLine_122.setName("SketchLine_127")
+SketchLine_122.result().setName("SketchLine_127")
+SketchLine_121.setName("SketchLine_126")
+SketchLine_121.result().setName("SketchLine_126")
+SketchLine_120.setName("SketchLine_125")
+SketchLine_120.result().setName("SketchLine_125")
+SketchLine_119.setName("SketchLine_124")
+SketchLine_119.result().setName("SketchLine_124")
+SketchLine_118.setName("SketchLine_123")
+SketchLine_118.result().setName("SketchLine_123")
+SketchLine_117.setName("SketchLine_122")
+SketchLine_117.result().setName("SketchLine_122")
+SketchLine_116.setName("SketchLine_121")
+SketchLine_116.result().setName("SketchLine_121")
+SketchLine_115.setName("SketchLine_120")
+SketchLine_115.result().setName("SketchLine_120")
+SketchLine_114.setName("SketchLine_119")
+SketchLine_114.result().setName("SketchLine_119")
+SketchLine_113.setName("SketchLine_118")
+SketchLine_113.result().setName("SketchLine_118")
+SketchLine_112.setName("SketchLine_117")
+SketchLine_112.result().setName("SketchLine_117")
+SketchLine_111.setName("SketchLine_116")
+SketchLine_111.result().setName("SketchLine_116")
+SketchLine_110.setName("SketchLine_115")
+SketchLine_110.result().setName("SketchLine_115")
+SketchLine_109.setName("SketchLine_114")
+SketchLine_109.result().setName("SketchLine_114")
+SketchLine_108.setName("SketchLine_113")
+SketchLine_108.result().setName("SketchLine_113")
+SketchLine_107.setName("SketchLine_112")
+SketchLine_107.result().setName("SketchLine_112")
+SketchLine_106.setName("SketchLine_111")
+SketchLine_106.result().setName("SketchLine_111")
+SketchLine_105.setName("SketchLine_110")
+SketchLine_105.result().setName("SketchLine_110")
+SketchLine_104.setName("SketchLine_109")
+SketchLine_104.result().setName("SketchLine_109")
+SketchLine_103.setName("SketchLine_108")
+SketchLine_103.result().setName("SketchLine_108")
+SketchLine_102.setName("SketchLine_107")
+SketchLine_102.result().setName("SketchLine_107")
+SketchArc_58.setName("SketchArc_59")
+SketchArc_58.result().setName("SketchArc_59")
+SketchArc_58.results()[1].setName("SketchArc_59_2")
+SketchArc_57.setName("SketchArc_58")
+SketchArc_57.result().setName("SketchArc_58")
+SketchArc_57.results()[1].setName("SketchArc_58_2")
+SketchArc_56.setName("SketchArc_57")
+SketchArc_56.result().setName("SketchArc_57")
+SketchArc_56.results()[1].setName("SketchArc_57_2")
+SketchArc_55.setName("SketchArc_56")
+SketchArc_55.result().setName("SketchArc_56")
+SketchArc_55.results()[1].setName("SketchArc_56_2")
+SketchArc_54.setName("SketchArc_55")
+SketchArc_54.result().setName("SketchArc_55")
+SketchArc_54.results()[1].setName("SketchArc_55_2")
+SketchArc_53.setName("SketchArc_54")
+SketchArc_53.result().setName("SketchArc_54")
+SketchArc_53.results()[1].setName("SketchArc_54_2")
+SketchArc_52.setName("SketchArc_53")
+SketchArc_52.result().setName("SketchArc_53")
+SketchArc_52.results()[1].setName("SketchArc_53_2")
+SketchArc_51.setName("SketchArc_52")
+SketchArc_51.result().setName("SketchArc_52")
+SketchArc_51.results()[1].setName("SketchArc_52_2")
+SketchArc_50.setName("SketchArc_51")
+SketchArc_50.result().setName("SketchArc_51")
+SketchArc_50.results()[1].setName("SketchArc_51_2")
+SketchArc_49.setName("SketchArc_50")
+SketchArc_49.result().setName("SketchArc_50")
+SketchArc_49.results()[1].setName("SketchArc_50_2")
+SketchArc_48.setName("SketchArc_49")
+SketchArc_48.result().setName("SketchArc_49")
+SketchArc_48.results()[1].setName("SketchArc_49_2")
+SketchArc_47.setName("SketchArc_48")
+SketchArc_47.result().setName("SketchArc_48")
+SketchArc_47.results()[1].setName("SketchArc_48_2")
+SketchArc_46.setName("SketchArc_47")
+SketchArc_46.result().setName("SketchArc_47")
+SketchArc_46.results()[1].setName("SketchArc_47_2")
+SketchArc_45.setName("SketchArc_46")
+SketchArc_45.result().setName("SketchArc_46")
+SketchArc_45.results()[1].setName("SketchArc_46_2")
+SketchArc_44.setName("SketchArc_45")
+SketchArc_44.result().setName("SketchArc_45")
+SketchArc_44.results()[1].setName("SketchArc_45_2")
+SketchArc_43.setName("SketchArc_44")
+SketchArc_43.result().setName("SketchArc_44")
+SketchArc_43.results()[1].setName("SketchArc_44_2")
+SketchArc_42.setName("SketchArc_43")
+SketchArc_42.result().setName("SketchArc_43")
+SketchArc_42.results()[1].setName("SketchArc_43_2")
+SketchArc_41.setName("SketchArc_42")
+SketchArc_41.result().setName("SketchArc_42")
+SketchArc_41.results()[1].setName("SketchArc_42_2")
+SketchArc_40.setName("SketchArc_41")
+SketchArc_40.result().setName("SketchArc_41")
+SketchArc_40.results()[1].setName("SketchArc_41_2")
+SketchArc_39.setName("SketchArc_40")
+SketchArc_39.result().setName("SketchArc_40")
+SketchArc_39.results()[1].setName("SketchArc_40_2")
+SketchArc_38.setName("SketchArc_39")
+SketchArc_38.result().setName("SketchArc_39")
+SketchArc_38.results()[1].setName("SketchArc_39_2")
+SketchArc_37.setName("SketchArc_38")
+SketchArc_37.result().setName("SketchArc_38")
+SketchArc_37.results()[1].setName("SketchArc_38_2")
+SketchArc_36.setName("SketchArc_37")
+SketchArc_36.result().setName("SketchArc_37")
+SketchArc_36.results()[1].setName("SketchArc_37_2")
+SketchArc_35.setName("SketchArc_36")
+SketchArc_35.result().setName("SketchArc_36")
+SketchArc_35.results()[1].setName("SketchArc_36_2")
+model.do()
+Sketch_6.setName("Sketch_7")
+Sketch_6.result().setName("Sketch_7")
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("FACE", "Sketch_7/Face-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("FACE", "Sketch_7/Face-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("FACE", "Sketch_7/Face-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
+SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
+SketchLine_126.setName("SketchLine_135")
+SketchLine_126.result().setName("SketchLine_135")
+SketchLine_127 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -43.54999111476925)
+SketchLine_127.setName("SketchLine_138")
+SketchLine_127.result().setName("SketchLine_138")
+SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e"))
+SketchPoint_10.setName("SketchPoint_12")
+SketchPoint_10.result().setName("SketchPoint_12")
+SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734)
+SketchLine_128.setName("SketchLine_131")
+SketchLine_128.result().setName("SketchLine_131")
+SketchLine_128.setAuxiliary(True)
+SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result())
+SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120")
+SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747)
+SketchLine_129.setName("SketchLine_132")
+SketchLine_129.result().setName("SketchLine_132")
+SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734)
+SketchLine_130.setName("SketchLine_137")
+SketchLine_130.result().setName("SketchLine_137")
+SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747)
+SketchLine_131.setName("SketchLine_134")
+SketchLine_131.result().setName("SketchLine_134")
+SketchLine_131.setAuxiliary(True)
+SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_128.startPoint())
+SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121")
+SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint())
+SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122")
+SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745)
+SketchLine_132.setName("SketchLine_133")
+SketchLine_132.result().setName("SketchLine_133")
+SketchLine_132.setAuxiliary(True)
+SketchConstraintCoincidence_116 = Sketch_7.setCoincident(SketchLine_129.endPoint(), SketchLine_132.startPoint())
+SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_123")
+SketchConstraintCoincidence_117 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchLine_131.startPoint())
+SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_124")
+SketchConstraintHorizontal_18 = Sketch_7.setHorizontal(SketchLine_128.result())
+SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_129.result())
+SketchConstraintHorizontal_19 = Sketch_7.setHorizontal(SketchLine_132.result())
+SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_131.result())
+SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_70s-SketchLine_72s-SketchLine_71e"))
+SketchPoint_11.setName("SketchPoint_13")
+SketchPoint_11.result().setName("SketchPoint_13")
+SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result())
+SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125")
+SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.7999999999999, -38.54999290880026, -152.3000099350335, -37.0499905327475, False)
+SketchArc_59.setName("SketchArc_60")
+SketchArc_59.result().setName("SketchArc_60")
+SketchArc_59.results()[1].setName("SketchArc_60_2")
+SketchLine_133 = Sketch_7.addLine(-150.7999999999999, -38.54999290880026, -150.8, -45.049990532747)
+SketchLine_133.setName("SketchLine_136")
+SketchLine_133.result().setName("SketchLine_136")
+SketchLine_133.setAuxiliary(True)
+SketchConstraintCoincidence_119 = Sketch_7.setCoincident(SketchArc_59.startPoint(), SketchLine_133.startPoint())
+SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_126")
+SketchConstraintCoincidence_120 = Sketch_7.setCoincident(SketchArc_59.endPoint(), SketchLine_126.endPoint())
+SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_127")
+SketchConstraintTangent_13 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_126.result())
+SketchConstraintTangent_14 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_133.result())
+SketchConstraintCoincidence_121 = Sketch_7.setCoincident(SketchLine_132.startPoint(), SketchLine_126.startPoint())
+SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_128")
+SketchConstraintCoincidence_122 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_133.endPoint())
+SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_129")
+SketchConstraintCoincidence_123 = Sketch_7.setCoincident(SketchLine_126.endPoint(), SketchLine_132.result())
+SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130")
+SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result())
+SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131")
+SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False)
+SketchArc_60.setName("SketchArc_61")
+SketchArc_60.result().setName("SketchArc_61")
+SketchArc_60.results()[1].setName("SketchArc_61_2")
+SketchConstraintCoincidence_125 = Sketch_7.setCoincident(SketchArc_60.startPoint(), SketchLine_130.startPoint())
+SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_132")
+SketchConstraintCoincidence_126 = Sketch_7.setCoincident(SketchArc_60.endPoint(), SketchLine_127.endPoint())
+SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_133")
+SketchConstraintTangent_15 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_130.result())
+SketchConstraintTangent_16 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_127.result())
+SketchConstraintCoincidence_127 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_130.endPoint())
+SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_134")
+SketchConstraintCoincidence_128 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_127.startPoint())
+SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_135")
+SketchConstraintCoincidence_129 = Sketch_7.setCoincident(SketchLine_130.startPoint(), SketchLine_128.result())
+SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_136")
+SketchConstraintCoincidence_130 = Sketch_7.setCoincident(SketchLine_127.endPoint(), SketchLine_133.result())
+SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_137")
+SketchConstraintRadius_6 = Sketch_7.setRadius(SketchArc_60.results()[1], 1.5)
+SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_59.results()[1], 1.5)
+model.do()
+Sketch_7.setName("Sketch_8")
+Sketch_7.result().setName("Sketch_8")
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")])
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2"))
+SketchLine_134 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 50.75)
+SketchLine_134.setName("SketchLine_139")
+SketchLine_134.result().setName("SketchLine_139")
+SketchLine_135 = Sketch_8.addLine(-0.8500000000000015, 47.45, 0.8499999999999983, 47.45)
+SketchLine_135.setName("SketchLine_141")
+SketchLine_135.result().setName("SketchLine_141")
+SketchConstraintHorizontal_20 = Sketch_8.setHorizontal(SketchLine_134.result())
+SketchConstraintHorizontal_21 = Sketch_8.setHorizontal(SketchLine_135.result())
+SketchArc_61 = Sketch_8.addArc(0.8499999999999999, 49.1, 0.8499999999999983, 47.45, 0.8499999999999983, 50.75, False)
+SketchArc_61.setName("SketchArc_63")
+SketchArc_61.result().setName("SketchArc_63")
+SketchArc_61.results()[1].setName("SketchArc_63_2")
+SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchArc_61.endPoint())
+SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_146")
+SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_135.endPoint())
+SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_148")
+SketchConstraintDistance_17 = Sketch_8.setDistance(SketchLine_134.result(), SketchLine_135.endPoint(), 3.3)
+SketchLine_136 = Sketch_8.addLine(0.8499999999999983, 50.75, 0.8499999999999983, 47.45)
+SketchLine_136.setName("SketchLine_140")
+SketchLine_136.result().setName("SketchLine_140")
+SketchLine_136.setAuxiliary(True)
+SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_136.startPoint())
+SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_138")
+SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_136.startPoint())
+SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_139")
+SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_135.endPoint(), SketchLine_136.endPoint())
+SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_140")
+SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_136.endPoint())
+SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_141")
+SketchLine_137 = Sketch_8.addLine(-0.8500000000000015, 50.75, -0.8500000000000015, 47.45)
+SketchLine_137.setName("SketchLine_142")
+SketchLine_137.result().setName("SketchLine_142")
+SketchLine_137.setAuxiliary(True)
+SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_134.endPoint(), SketchLine_137.startPoint())
+SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143")
+SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_137.endPoint())
+SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_147")
+SketchConstraintMiddle_2 = Sketch_8.setMiddlePoint(SketchLine_136.result(), SketchArc_61.center())
+SketchConstraintLength_10 = Sketch_8.setLength(SketchLine_134.result(), 1.7)
+SketchConstraintLength_10.setName("SketchConstraintLength_11")
+SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_137.result())
+SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_136.result())
+SketchLine_138 = Sketch_8.addLine(0.8499999999999983, 50.75, -0.8500000000000015, 47.45)
+SketchLine_138.setName("SketchLine_143")
+SketchLine_138.result().setName("SketchLine_143")
+SketchLine_138.setAuxiliary(True)
+SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_138.startPoint())
+SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_150")
+SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_138.startPoint())
+SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_151")
+SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchLine_136.startPoint(), SketchLine_138.startPoint())
+SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_152")
+SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_138.endPoint())
+SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_153")
+SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchLine_138.endPoint())
+SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_155")
+SketchPoint_12 = Sketch_8.addPoint(0, 49.1)
+SketchPoint_12.setName("SketchPoint_14")
+SketchPoint_12.result().setName("SketchPoint_14")
+SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_138.result())
+SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_156")
+SketchConstraintMiddle_3 = Sketch_8.setMiddlePoint(SketchLine_138.result(), SketchPoint_12.coordinates())
+SketchConstraintMiddle_3.setName("SketchConstraintMiddle_4")
+SketchProjection_2 = Sketch_8.addProjection(model.selection("EDGE", "PartSet/OY"))
+SketchLine_139 = SketchProjection_2.createdFeature()
+SketchLine_139.setName("SketchLine_144")
+SketchLine_139.result().setName("SketchLine_144")
+SketchConstraintCoincidence_145 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_139.result())
+SketchConstraintCoincidence_145.setName("SketchConstraintCoincidence_157")
+SketchArc_62 = Sketch_8.addArc(-0.8500000000000004, 49.1, -0.8500000000000015, 50.75, -0.8500000000000015, 47.45, False)
+SketchConstraintCoincidence_146 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchArc_62.endPoint())
+SketchConstraintCoincidence_146.setName("SketchConstraintCoincidence_149")
+SketchConstraintCoincidence_147 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchArc_62.endPoint())
+SketchConstraintCoincidence_147.setName("SketchConstraintCoincidence_154")
+SketchConstraintCoincidence_148 = Sketch_8.setCoincident(SketchLine_138.endPoint(), SketchArc_62.endPoint())
+SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_158")
+SketchConstraintCoincidence_149 = Sketch_8.setCoincident(SketchArc_62.startPoint(), SketchLine_134.endPoint())
+SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_159")
+SketchConstraintMiddle_4 = Sketch_8.setMiddlePoint(SketchLine_137.result(), SketchArc_62.center())
+SketchConstraintMiddle_4.setName("SketchConstraintMiddle_5")
+SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_6_1/Modfied_2"))
+SketchLine_140.setName("SketchLine_145")
+SketchLine_140.result().setName("SketchLine_145")
+SketchConstraintDistance_18 = Sketch_8.setDistance(SketchLine_140.result(), SketchPoint_12.coordinates(), 6)
+SketchLine_141 = Sketch_8.addLine(0, 49.1, 107.43, 49.1)
+SketchLine_141.setName("SketchLine_146")
+SketchLine_141.result().setName("SketchLine_146")
+SketchLine_141.setAuxiliary(True)
+SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_141.startPoint())
+SketchConstraintCoincidence_150.setName("SketchConstraintCoincidence_160")
+SketchConstraintHorizontal_22 = Sketch_8.setHorizontal(SketchLine_141.result())
+SketchConstraintLength_11 = Sketch_8.setLength(SketchLine_141.result(), 107.43)
+SketchConstraintLength_11.setName("SketchConstraintLength_12")
+SketchMultiTranslation_4_objects = [SketchLine_134.result(), SketchLine_135.result(), SketchArc_61.results()[1], SketchArc_62.results()[1]]
+SketchMultiTranslation_4 = Sketch_8.addTranslation(SketchMultiTranslation_4_objects, SketchPoint_12.coordinates(), SketchLine_141.endPoint(), 2)
+[SketchLine_142, SketchLine_143, SketchArc_63, SketchArc_64] = SketchMultiTranslation_4.translated()
+SketchArc_64.setName("SketchArc_65")
+SketchArc_64.result().setName("SketchArc_65")
+SketchArc_64.results()[1].setName("SketchArc_65_2")
+SketchArc_63.setName("SketchArc_64")
+SketchArc_63.result().setName("SketchArc_64")
+SketchArc_63.results()[1].setName("SketchArc_64_2")
+SketchLine_143.setName("SketchLine_148")
+SketchLine_143.result().setName("SketchLine_148")
+SketchLine_142.setName("SketchLine_147")
+SketchLine_142.result().setName("SketchLine_147")
+SketchConstraintMirror_6_objects = [SketchArc_63.results()[1], SketchArc_64.results()[1], SketchLine_142.result(), SketchLine_143.result()]
+SketchConstraintMirror_6 = Sketch_8.addMirror(SketchLine_139.result(), SketchConstraintMirror_6_objects)
+[SketchArc_65, SketchArc_66, SketchLine_144, SketchLine_145] = SketchConstraintMirror_6.mirrored()
+SketchLine_145.setName("SketchLine_150")
+SketchLine_145.result().setName("SketchLine_150")
+SketchLine_144.setName("SketchLine_149")
+SketchLine_144.result().setName("SketchLine_149")
+SketchArc_66.setName("SketchArc_67")
+SketchArc_66.result().setName("SketchArc_67")
+SketchArc_66.results()[1].setName("SketchArc_67_2")
+SketchArc_65.setName("SketchArc_66")
+SketchArc_65.result().setName("SketchArc_66")
+SketchArc_65.results()[1].setName("SketchArc_66_2")
+model.do()
+Sketch_8.setName("Sketch_9")
+Sketch_8.result().setName("Sketch_9")
+ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")])
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(ExtrusionCut_7, 1)
+model.testNbSubResults(ExtrusionCut_7, [0])
+model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.FACE, [156])
+model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.EDGE, [920])
+model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1840])
+model.testResultsVolumes(ExtrusionCut_7, [5345.689532925511230132542550564])
+
+assert(model.checkPythonDump)