FIND_PACKAGE(SalomeOmniORBPy REQUIRED)
FIND_PACKAGE(SalomeLibXml2 REQUIRED)
FIND_PACKAGE(SalomeHDF5 REQUIRED COMPONENTS C)
+FIND_PACKAGE(SalomeCAS REQUIRED)
+FIND_PACKAGE(SalomeVTK 6.0 REQUIRED)
# Other KERNEL optionals:
IF(SALOME_USE_MPI)
FIND_PACKAGE(SalomeOpenGL)
SALOME_LOG_OPTIONAL_PACKAGE(OpenGL SALOME_USE_GLVIEWER)
ENDIF()
- IF(SALOME_USE_VTKVIEWER)
- # Required components are listed in the FindSalomeVTK.cmake file:
- FIND_PACKAGE(SalomeVTK 6.0)
- SALOME_LOG_OPTIONAL_PACKAGE(VTK SALOME_USE_VTKVIEWER)
- ENDIF()
-
ENDIF(SALOME_BUILD_GUI)
##
## GEOM specifics
##
-FIND_PACKAGE(SalomeCAS REQUIRED)
IF(SALOME_BUILD_GUI)
# OpenCV
SET(_${PROJECT_NAME}_exposed_targets
GEOMArchimede BREPExport BREPImport BlockFix GEOMbasic GEOMAlgo GEOMClient GEOMImpl
GEOMUtils GEOMEngine GEOM_SupervEngine IGESExport IGESImport GEOMSketcher
- SalomeIDLGEOM STEPExport STEPImport STLExport ShHealOper XAO AdvancedEngine
+ SalomeIDLGEOM STEPExport STEPImport STLExport ShHealOper XAO AdvancedEngine OCC2VTK VTKExport
)
IF(SALOME_BUILD_GUI)
LIST(APPEND _${PROJECT_NAME}_exposed_targets
AdvancedGUI BasicGUI BlocksGUI BooleanGUI BuildGUI DisplayGUI DlgRef EntityGUI GEOMBase
GEOMFiltersSelection GEOM GEOMToolsGUI GenerationGUI GroupGUI Material MeasureGUI GEOMObject
- OCC2VTK VTKExport OperationGUI PrimitiveGUI RepairGUI TransformationGUI ImportExportGUI
+ OperationGUI PrimitiveGUI RepairGUI TransformationGUI ImportExportGUI
)
ENDIF(SALOME_BUILD_GUI)
SET(GUI_ROOT_DIR "${GUI_ROOT_DIR}")
SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include" "${PROJECT_BINARY_DIR}/include")
-CONFIGURE_PACKAGE_CONFIG_FILE(adm_local/cmake_files/${PROJECT_NAME}Config.cmake.in
+CONFIGURE_PACKAGE_CONFIG_FILE(${PROJECT_NAME}Config.cmake.in
${PROJECT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
INSTALL_DESTINATION "${SALOME_INSTALL_CMAKE_LOCAL}"
PATH_VARS CONF_INCLUDE_DIRS SALOME_INSTALL_CMAKE_LOCAL CMAKE_INSTALL_PREFIX
--- /dev/null
+# - Config file for the @PROJECT_NAME@ package
+# It defines the following variables.
+# Specific to the pacakge @PROJECT_NAME@ itself:
+# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
+#
+
+###############################################################
+# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or
+# email : webmaster.salome@opencascade.com
+###############################################################
+
+### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
+@PACKAGE_INIT@
+
+# Load the dependencies for the libraries of @PROJECT_NAME@
+# (contains definitions for IMPORTED targets). This is only
+# imported if we are not built as a subproject (in this case targets are already there)
+IF(NOT TARGET GEOMbasic AND NOT @PROJECT_NAME@_BINARY_DIR)
+ INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
+ENDIF()
+
+# Package root dir:
+SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
+
+# Include directories
+SET_AND_CHECK(GEOM_INCLUDE_DIRS "${GEOM_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
+
+#### Now the specificities
+
+# Options exported by the package:
+SET(SALOME_BUILD_DOC @SALOME_BUILD_DOC@)
+SET(SALOME_BUILD_TESTS @SALOME_BUILD_TESTS@)
+
+# Advanced options
+SET(SALOME_BUILD_GUI @SALOME_BUILD_GUI@)
+SET(SALOME_GEOM_USE_OPENCV @SALOME_GEOM_USE_OPENCV@)
+
+# Level 1 prerequisites:
+SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
+SET_AND_CHECK(CAS_ROOT_DIR_EXP "@PACKAGE_CAS_ROOT_DIR@")
+
+# Optional level 1 prerequisites:
+IF(SALOME_BUILD_GUI)
+ SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
+ENDIF()
+IF(SALOME_GEOM_USE_OPENCV)
+ SET_AND_CHECK(OPENCV_ROOT_DIR_EXP "@PACKAGE_OPENCV_ROOT_DIR@")
+ENDIF()
+
+# For all prerequisites, load the corresponding targets if the package was used
+# in CONFIG mode. This ensures dependent projects link correctly
+# without having to set LD_LIBRARY_PATH:
+SET(_PREREQ CAS SalomeGUI OpenCV)
+SET(_PREREQ_CONFIG_DIR "@CAS_DIR@" "@SalomeGUI_DIR@" "@OpenCV_DIR@")
+LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
+# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
+MATH(EXPR _range "${_list_len}-1")
+FOREACH(_p RANGE ${_range})
+ LIST(GET _PREREQ ${_p} _pkg )
+ LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
+ IF(_pkg_dir)
+ MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
+ FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
+ PATHS "${_pkg_dir}"
+ NO_DEFAULT_PATH)
+ ENDIF()
+ENDFOREACH()
+
+# Installation directories
+SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
+SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
+SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
+SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
+SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
+SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
+SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
+SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
+SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
+SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
+SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
+SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
+SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
+SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
+
+# Include KERNEL targets if they were not already loaded:
+IF(NOT (TARGET SALOMEBasics))
+ INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
+ENDIF()
+
+# Exposed GEOM targets:
+SET(GEOM_GEOMArchimede GEOMArchimede)
+SET(GEOM_BREPExport BREPExport)
+SET(GEOM_BREPImport BREPImport)
+SET(GEOM_BlockFix BlockFix)
+SET(GEOM_GEOMbasic GEOMbasic)
+SET(GEOM_GEOMAlgo GEOMAlgo)
+SET(GEOM_GEOMClient GEOMClient)
+SET(GEOM_GEOMImpl GEOMImpl)
+SET(GEOM_GEOMUtils GEOMUtils)
+SET(GEOM_GEOMEngine GEOMEngine)
+SET(GEOM_GEOM_SupervEngine GEOM_SupervEngine)
+SET(GEOM_IGESExport IGESExport)
+SET(GEOM_IGESImport IGESImport)
+SET(GEOM_GEOMSketcher GEOMSketcher)
+SET(GEOM_SalomeIDLGEOM SalomeIDLGEOM)
+SET(GEOM_STEPExport STEPExport)
+SET(GEOM_STEPImport STEPImport)
+SET(GEOM_STLExport STLExport)
+SET(GEOM_ShHealOper ShHealOper)
+SET(GEOM_XAO XAO)
+SET(GEOM_AdvancedEngine AdvancedEngine)
+SET(GEOM_AdvancedGUI AdvancedGUI)
+SET(GEOM_BasicGUI BasicGUI)
+SET(GEOM_BlocksGUI BlocksGUI)
+SET(GEOM_BooleanGUI BooleanGUI)
+SET(GEOM_BuildGUI BuildGUI)
+SET(GEOM_DisplayGUI DisplayGUI)
+SET(GEOM_DlgRef DlgRef)
+SET(GEOM_EntityGUI EntityGUI)
+SET(GEOM_GEOMBase GEOMBase)
+SET(GEOM_GEOMFiltersSelection GEOMFiltersSelection)
+SET(GEOM_GEOM GEOM)
+SET(GEOM_GEOMToolsGUI GEOMToolsGUI)
+SET(GEOM_GenerationGUI GenerationGUI)
+SET(GEOM_GroupGUI GroupGUI)
+SET(GEOM_Material Material)
+SET(GEOM_MeasureGUI MeasureGUI)
+SET(GEOM_GEOMObject GEOMObject)
+SET(GEOM_OCC2VTK OCC2VTK)
+SET(GEOM_VTKExport VTKExport)
+SET(GEOM_OperationGUI OperationGUI)
+SET(GEOM_PrimitiveGUI PrimitiveGUI)
+SET(GEOM_RepairGUI RepairGUI)
+SET(GEOM_TransformationGUI TransformationGUI)
+SET(GEOM_ImportExportGUI ImportExportGUI)
+SET(GEOM_GEOMShapeRec GEOMShapeRec)
