TestGroup2.py
TestField.py
TestGroup1799.py
- TestGroupMove.py
- TestGroupMove2.py
- TestGroupMove3.py
- TestGroupMove4.py
- TestGroupMove5.py
- TestGroupMove6.py
- TestGroupMove7.py
- TestGroupMove8.py
- TestGroupMove9.py
+ TestGroupMove01.py
+ TestGroupMove02.py
+ TestGroupMove03.py
+ TestGroupMove04.py
+ TestGroupMove05.py
+ TestGroupMove06.py
+ TestGroupMove07.py
+ TestGroupMove08.py
+ TestGroupMove09.py
TestGroupMove10.py
TestGroupMove11.py
TestGroupMove12.py
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test that box partitioned is splitted: group with edge becomes 2 edges group,
-# group with not-touched vertex keeps this vertex.
-
-from salome.shaper import model
-from ModelAPI import *
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 20, 10, 10)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Back"), 10, True)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]")])
-Group_2 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")])
-model.do()
-# move groups
-Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-model.end()
-
-# Check groups
-aFactory = ModelAPI_Session.get().validators()
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 2)
-assert(aFactory.validate(Group_1.feature()))
-
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_2.feature()))
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test that box partitioned is splitted: group with edge becomes 2 edges group,
+# group with not-touched vertex keeps this vertex.
+
+from salome.shaper import model
+from ModelAPI import *
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 20, 10, 10)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Back"), 10, True)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]")])
+Group_2 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")])
+model.do()
+# move groups
+Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+model.end()
+
+# Check groups
+aFactory = ModelAPI_Session.get().validators()
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 2)
+assert(aFactory.validate(Group_1.feature()))
+
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_2.feature()))
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test that removed vertex, selected in the group makes empty group => invalid one
+
+from salome.shaper import model
+from ModelAPI import *
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 20)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Right][Box_1_1/Top]"), model.selection("VERTEX", "[Box_1_1/Front][Box_1_1/Left][Box_1_1/Top]"), model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Bottom]"))
+Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")])
+Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPSOLID", "Partition_1_1"))
+Remove_SubShapes_1.setSubShapesToKeep([model.selection("SOLID", "Partition_1_1_2")])
+model.do()
+# move group
+Part_1_doc.moveFeature(Group_1.feature(), Remove_SubShapes_1.feature())
+model.end()
+
+# Check group
+aFactory = ModelAPI_Session.get().validators()
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 0)
+assert(aFactory.validate(Group_1.feature()) == False)
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test that partition divides cylinder into 4 faces, there is no edges in a group moved to the end
+# Based on the CEA report mail 04.12.2018, page 2
+
+from SketchAPI import *
+
+from ModelAPI import *
+from GeomAPI import *
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchArc_1 = Sketch_1.addArc(-1.103476974288834e-12, 24.99999999999979, 24.49489742783218, 30, 0, 50, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(0, 50, -10, 50)
+SketchLine_2.setAuxiliary(True)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(24.49489742783218, 30, 24.49489742783218, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(24.49489742783218, 5, 34.49489742783218, 5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(34.49489742783218, 5, 34.49489742783218, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_6 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+SketchLine_7 = Sketch_1.addLine(34.49489742783218, 0, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_7.endPoint())
+SketchLine_8 = Sketch_1.addLine(0, 50, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_8.endPoint())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 10)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 5)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_3.result(), 25)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 50)
+SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_2.result(), 10)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 25)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3")])
+Partition_1_objects = [model.selection("SOLID", "Revolution_1_1"), model.selection("FACE", "PartSet/XOZ"), model.selection("FACE", "PartSet/YOZ")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
+model.do()
+
+# move group
+Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
+model.end()
+
+# Check group: result must be four faces
+aFactory = ModelAPI_Session.get().validators()
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 4)
+assert(aFactory.validate(Group_1.feature()))
+for i in range(4):
+ assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history. Cylinders divided to two by cut, then each divided to
+# two by partition by plane, then resulting compsolids are collected in compound.
+# Checking that group on initial extrusion moved to the end contains the corresponding
+# results, but divided.
+
+from salome.shaper import model
+from ModelAPI import *
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_1.addCircle(-4.602216748768477, 10.94581280788177, 9.660420057801511)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r")], model.selection(), 10, 0)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2")])
+Group_2 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 1, True)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchCircle_2 = Sketch_2.addCircle(-5.643073116097736, 11.91382008305256, 15.03576198961618)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2r")], model.selection(), 2, -4)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("COMPOUND", "Cut_1_1"), model.selection("FACE", "Plane_1")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1"), model.selection("COMPSOLID", "Partition_1_2")])
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Compound_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+model.end()
+
+aFactory = ModelAPI_Session.get().validators()
+# check group 1: cylindical face is divided to 6 (because of seam edge)
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 6)
+assert(aFactory.validate(Group_1.feature()))
+
+# check group 2: solid is divided to 4 solids
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 4)
+assert(aFactory.validate(Group_2.feature()))
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history.
+# Faces and edges of a box has been collected to groups. After that, the box has been copied.
+# Check that groups moved to the end contain corresponding results.
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
+Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
+Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
+Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 15, 2)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), LinearCopy_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+from ModelAPI import *
+
+aFactory = ModelAPI_Session.get().validators()
+# check group 1: all solids in compound should be selected
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 2)
+assert(aFactory.validate(Group_1.feature()))
+# check group 2: number of faces is multiplied twice than original
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 12)
+assert(aFactory.validate(Group_2.feature()))
+# check group 3: number of edges is multiplied twice than original
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 24)
+assert(aFactory.validate(Group_3.feature()))
+
+model.begin()
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 2, model.selection("EDGE", "PartSet/OZ"), 15, 2)
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), LinearCopy_2.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+# check group 1: all solids in compound should be selected
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 8)
+assert(aFactory.validate(Group_1.feature()))
+# check group 2: number of faces is multiplied twice than original
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 48)
+assert(aFactory.validate(Group_2.feature()))
+# check group 3: number of edges is multiplied twice than original
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 96)
+assert(aFactory.validate(Group_3.feature()))
+
+model.begin()
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "LinearCopy_2_1_1_2")], model.selection("EDGE", "PartSet/OZ"), 2)
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), AngularCopy_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+# check group 1: all solids in compound should be selected
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 4)
+assert(aFactory.validate(Group_1.feature()))
+# check group 2: number of faces is multiplied twice than original
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 24)
+assert(aFactory.validate(Group_2.feature()))
+# check group 3: number of edges is multiplied twice than original
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 48)
+assert(aFactory.validate(Group_3.feature()))
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history.
+# Copied boxes are involved to Fill operation.
+# Check the groups of initial boxes moved to the end contain the corresponding
+# results, but divided.
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Bottom]"), model.selection("VERTEX", "[Box_1_1/Front][Box_1_1/Right][Box_1_1/Top]"))
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "Axis_1"), 10, 2)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")])
+Group_2_objects = [model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front")]
+Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
+Group_3_objects = [model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+Group_4 = model.addGroup(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_2")])
+Group_5_objects = [model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front")]
+Group_5 = model.addGroup(Part_1_doc, Group_5_objects)
+Group_6_objects = [model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]")]
+Group_6 = model.addGroup(Part_1_doc, Group_6_objects)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right"))
+Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")], [model.selection("SOLID", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_1")])
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Fill_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
+Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
+Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
+model.end()
+
+from ModelAPI import *
+
+aFactory = ModelAPI_Session.get().validators()
+
+# groups related to original box should be split
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 3)
+assert(aFactory.validate(Group_1.feature()))
+
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 13)
+assert(aFactory.validate(Group_2.feature()))
+
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 19)
+assert(aFactory.validate(Group_3.feature()))
+
+# groups related to the copied box should contain only the elements connected with the original box
+selectionList = Group_4.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_4.feature()))
+
+selectionList = Group_5.feature().selectionList("group_list")
+assert(selectionList.size() == 3)
+assert(aFactory.validate(Group_5.feature()))
+
+selectionList = Group_6.feature().selectionList("group_list")
+assert(selectionList.size() == 3)
+assert(aFactory.validate(Group_6.feature()))
+
+
+model.begin()
+Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Fill_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Top"), model.selection("EDGE", "[Fill_1_1_2/Modified_Face&Box_1_1/Right][(Fill_1_1_2/Modified_Face&Box_1_1/Right)(Fill_1_1_2/Modified_Face&Plane_1/Plane_1)(Fill_1_1_2/Modified_Face&Box_1_1/Front)(Fill_1_1_2/Modified_Face&Box_1_1/Top)2(Fill_1_1_2/Modified_Face&Box_1_1/Left)2]")])
+Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_2")], [model.selection("FACE", "Filling_1_1")])
+model.do()
+# move groups to the end once again
+Part_1_doc.moveFeature(Group_1.feature(), Fill_2.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
+Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
+Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
+model.end()
+
+# groups related to original box should be split
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 4)
+assert(aFactory.validate(Group_1.feature()))
+
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 16)
+assert(aFactory.validate(Group_2.feature()))
+
+selectionList = Group_3.feature().selectionList("group_list")
+# one of edges should disappear, due to its belonging to the face of the filling
+assert(selectionList.size() == 18)
+assert(aFactory.validate(Group_3.feature()))
+
+# groups related to the copied box should be split correspondingly
+selectionList = Group_4.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_4.feature()))
+
+selectionList = Group_5.feature().selectionList("group_list")
+assert(selectionList.size() == 6)
+assert(aFactory.validate(Group_5.feature()))
+
+selectionList = Group_6.feature().selectionList("group_list")
+assert(selectionList.size() == 5)
+assert(aFactory.validate(Group_6.feature()))
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history.
+# Faces and edges of a box has been collected to groups. After that, the box has been symmetried.
+# Check that groups moved to the end contain corresponding results.
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
+Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
+Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
+Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("FACE", "Box_1_1/Left"), False)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Symmetry_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+from ModelAPI import *
+
+aFactory = ModelAPI_Session.get().validators()
+# check group 1: solids should be selected
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_1.feature()))
+# check group 2: number of faces is the same
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 6)
+assert(aFactory.validate(Group_2.feature()))
+# check group 3: number of edges is the same
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 12)
+assert(aFactory.validate(Group_3.feature()))
+
+model.begin()
+Symmetry_2 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Symmetry_1_1")], model.selection("VERTEX", "[Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Front][Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Left][Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Bottom]"), True)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Symmetry_2.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+# check group 1: all solids in compound should be selected
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 2)
+assert(aFactory.validate(Group_1.feature()))
+# check group 2: number of faces is multiplied twice than original
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 12)
+assert(aFactory.validate(Group_2.feature()))
+# check group 3: number of edges is multiplied twice than original
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 24)
+assert(aFactory.validate(Group_3.feature()))
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history. Fillet operation.
+# Check the groups of initial solids moved to the end contain the corresponding
+# results, but divided.
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
+Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
+Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
+Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
+Group_4 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")])
+Group_5_objects = [model.selection("FACE", "Cylinder_1_1/Face_1"), model.selection("FACE", "Cylinder_1_1/Face_2"), model.selection("FACE", "Cylinder_1_1/Face_3")]
+Group_5 = model.addGroup(Part_1_doc, Group_5_objects)
+Group_6_objects = [model.selection("EDGE", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_2]"), model.selection("EDGE", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])")]
+Group_6 = model.addGroup(Part_1_doc, Group_6_objects)
+Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")], 2)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Fillet_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+model.end()
+
+from ModelAPI import *
+
+aFactory = ModelAPI_Session.get().validators()
+
+# groups related to original box should be split
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_1.feature()))
+
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 6)
+assert(aFactory.validate(Group_2.feature()))
+
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 11)
+assert(aFactory.validate(Group_3.feature()))
+
+model.begin()
+Fillet_2 = model.addFillet(Part_1_doc, [model.selection("FACE", "Cylinder_1_1/Face_2")], 2)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_4.feature(), Fillet_2.feature())
+Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
+Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
+model.end()
+
+# groups related to original cylinder should be split
+selectionList = Group_4.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_4.feature()))
+
+selectionList = Group_5.feature().selectionList("group_list")
+assert(selectionList.size() == 3)
+assert(aFactory.validate(Group_5.feature()))
+
+selectionList = Group_6.feature().selectionList("group_list")
+assert(selectionList.size() == 2) # edge selected for the fillet become removed
+assert(aFactory.validate(Group_6.feature()))
+
+model.begin()
+Fillet_3 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Fillet_1_1/MF:Fillet_Face&Box_1_1/Front][Fillet_1_1/MF:Fillet_Face&Box_1_1/Left]")], 1, 2)
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), Fillet_3.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
+Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
+Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
+model.end()
+
+# groups related to original box should be split
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_1.feature()))
+
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 6)
+assert(aFactory.validate(Group_2.feature()))
+
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 9)
+assert(aFactory.validate(Group_3.feature()))
+
+# groups related to original cylinder should stay untouched
+selectionList = Group_4.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_4.feature()))
+
+selectionList = Group_5.feature().selectionList("group_list")
+assert(selectionList.size() == 3)
+assert(aFactory.validate(Group_5.feature()))
+
+selectionList = Group_6.feature().selectionList("group_list")
+assert(selectionList.size() == 2)
+assert(aFactory.validate(Group_6.feature()))
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test of deep nested results history. FuseFaces operation.
+# Check the groups of initial solids moved to the end contain the corresponding
+# results, but merged faces.
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1"), model.selection("SOLID", "Box_1_1")])
+Union_1_objects = [model.selection("SOLID", "Partition_1_1_1"), model.selection("SOLID", "Partition_1_1_2"), model.selection("SOLID", "Partition_1_1_3")]
+Union_1 = model.addUnion(Part_1_doc, Union_1_objects)
+Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Union_1_1")])
+Group_2_objects = [model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Back"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Bottom"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), model.selection("FACE", "Box_1_1/Front")]
+Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
+Group_3_objects = [model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3]"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1]"), model.selection("EDGE", "([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3])(Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1)([Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_3/Modified_Face&Box_1_1/Bottom])([Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1"), model.selection("EDGE", "([Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1])([Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back])(Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1)_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back]"), model.selection("EDGE", "([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3])([Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom])([Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("EDGE", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top]"), model.selection("EDGE", "([Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1])([Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Left])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Right][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Front]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Front]")]
+Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
+Group_4_objects = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("VERTEX", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("VERTEX", "[_weak_name_10_Union_1_1]e[_weak_name_4_Union_1_1]e"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Right][Box_1_1/Front]"), model.selection("VERTEX", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3][Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Back]"), model.selection("VERTEX", "[Box_1_1/Right][Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("VERTEX", "[_weak_name_3_Union_1_1]e[_weak_name_9_Union_1_1]e"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right]"), model.selection("VERTEX", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3][Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]")]
+Group_4 = model.addGroup(Part_1_doc, Group_4_objects)
+FusionFaces_1 = model.addFusionFaces(Part_1_doc, model.selection("SOLID", "Union_1_1"))
+model.do()
+# move groups to the end
+Part_1_doc.moveFeature(Group_1.feature(), FusionFaces_1.feature())
+Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
+Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
+Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
+model.end()
+
+from ModelAPI import *
+
+aFactory = ModelAPI_Session.get().validators()
+
+# number of solids should be the same
+selectionList = Group_1.feature().selectionList("group_list")
+assert(selectionList.size() == 1)
+assert(aFactory.validate(Group_1.feature()))
+
+# same-plane faces should be merged
+selectionList = Group_2.feature().selectionList("group_list")
+assert(selectionList.size() == 11)
+assert(aFactory.validate(Group_2.feature()))
+
+# shared edges of merged faces should be deleted
+selectionList = Group_3.feature().selectionList("group_list")
+assert(selectionList.size() == 15)
+assert(aFactory.validate(Group_3.feature()))
+
+selectionList = Group_4.feature().selectionList("group_list")
+assert(selectionList.size() == 10)
+assert(aFactory.validate(Group_4.feature()))
+
+assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test that removed vertex, selected in the group makes empty group => invalid one
-
-from salome.shaper import model
-from ModelAPI import *
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 20)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Right][Box_1_1/Top]"), model.selection("VERTEX", "[Box_1_1/Front][Box_1_1/Left][Box_1_1/Top]"), model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Bottom]"))
-Group_1 = model.addGroup(Part_1_doc, [model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")])
-Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPSOLID", "Partition_1_1"))
-Remove_SubShapes_1.setSubShapesToKeep([model.selection("SOLID", "Partition_1_1_2")])
-model.do()
-# move group
-Part_1_doc.moveFeature(Group_1.feature(), Remove_SubShapes_1.feature())
-model.end()
-
-# Check group
-aFactory = ModelAPI_Session.get().validators()
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 0)
-assert(aFactory.validate(Group_1.feature()) == False)
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test that partition divides cylinder into 4 faces, there is no edges in a group moved to the end
-# Based on the CEA report mail 04.12.2018, page 2
-
-from SketchAPI import *
-
-from ModelAPI import *
-from GeomAPI import *
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchArc_1 = Sketch_1.addArc(-1.103476974288834e-12, 24.99999999999979, 24.49489742783218, 30, 0, 50, False)
-SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
-SketchLine_1 = SketchProjection_1.createdFeature()
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
-SketchLine_2 = Sketch_1.addLine(0, 50, -10, 50)
-SketchLine_2.setAuxiliary(True)
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
-SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
-SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
-SketchLine_3 = Sketch_1.addLine(24.49489742783218, 30, 24.49489742783218, 5)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.startPoint())
-SketchLine_4 = Sketch_1.addLine(24.49489742783218, 5, 34.49489742783218, 5)
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(34.49489742783218, 5, 34.49489742783218, 0)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
-SketchLine_6 = SketchProjection_2.createdFeature()
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
-SketchLine_7 = Sketch_1.addLine(34.49489742783218, 0, 0, 0)
-SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
-SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_7.endPoint())
-SketchLine_8 = Sketch_1.addLine(0, 50, 0, 0)
-SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_8.startPoint())
-SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_8.endPoint())
-SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
-SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
-SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 10)
-SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 5)
-SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_3.result(), 25)
-SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 50)
-SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_2.result(), 10)
-SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 25)
-model.do()
-Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_8f-SketchLine_7r-SketchLine_5r-SketchLine_4r-SketchLine_3r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_3")])
-Partition_1_objects = [model.selection("SOLID", "Revolution_1_1"), model.selection("FACE", "PartSet/XOZ"), model.selection("FACE", "PartSet/YOZ")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
-model.do()
-
-# move group
-Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
-model.end()
-
-# Check group: result must be four faces
-aFactory = ModelAPI_Session.get().validators()
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 4)
-assert(aFactory.validate(Group_1.feature()))
-for i in range(4):
- assert(Group_1.groupList().value(i).value().shapeType() == GeomAPI_Shape.FACE)
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history. Cylinders divided to two by cut, then each divided to
-# two by partition by plane, then resulting compsolids are collected in compound.
-# Checking that group on initial extrusion moved to the end contains the corresponding
-# results, but divided.
-
-from salome.shaper import model
-from ModelAPI import *
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
-SketchCircle_1 = Sketch_1.addCircle(-4.602216748768477, 10.94581280788177, 9.660420057801511)
-model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r")], model.selection(), 10, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2")])
-Group_2 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 1, True)
-Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
-SketchCircle_2 = Sketch_2.addCircle(-5.643073116097736, 11.91382008305256, 15.03576198961618)
-model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2r")], model.selection(), 2, -4)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("COMPOUND", "Cut_1_1"), model.selection("FACE", "Plane_1")])
-Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1"), model.selection("COMPSOLID", "Partition_1_2")])
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Compound_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-model.end()
-
-aFactory = ModelAPI_Session.get().validators()
-# check group 1: cylindical face is divided to 6 (because of seam edge)
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 6)
-assert(aFactory.validate(Group_1.feature()))
-
-# check group 2: solid is divided to 4 solids
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 4)
-assert(aFactory.validate(Group_2.feature()))
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history.
-# Faces and edges of a box has been collected to groups. After that, the box has been copied.
-# Check that groups moved to the end contain corresponding results.
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
-Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
-Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
-Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
-Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
-LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 15, 2)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), LinearCopy_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-from ModelAPI import *
-
-aFactory = ModelAPI_Session.get().validators()
-# check group 1: all solids in compound should be selected
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 2)
-assert(aFactory.validate(Group_1.feature()))
-# check group 2: number of faces is multiplied twice than original
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 12)
-assert(aFactory.validate(Group_2.feature()))
-# check group 3: number of edges is multiplied twice than original
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 24)
-assert(aFactory.validate(Group_3.feature()))
-
-model.begin()
-LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 15, 2, model.selection("EDGE", "PartSet/OZ"), 15, 2)
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), LinearCopy_2.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-# check group 1: all solids in compound should be selected
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 8)
-assert(aFactory.validate(Group_1.feature()))
-# check group 2: number of faces is multiplied twice than original
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 48)
-assert(aFactory.validate(Group_2.feature()))
-# check group 3: number of edges is multiplied twice than original
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 96)
-assert(aFactory.validate(Group_3.feature()))
-
-model.begin()
-AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "LinearCopy_2_1_1_2")], model.selection("EDGE", "PartSet/OZ"), 2)
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), AngularCopy_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-# check group 1: all solids in compound should be selected
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 4)
-assert(aFactory.validate(Group_1.feature()))
-# check group 2: number of faces is multiplied twice than original
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 24)
-assert(aFactory.validate(Group_2.feature()))
-# check group 3: number of edges is multiplied twice than original
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 48)
-assert(aFactory.validate(Group_3.feature()))
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history.
-# Copied boxes are involved to Fill operation.
-# Check the groups of initial boxes moved to the end contain the corresponding
-# results, but divided.
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Bottom]"), model.selection("VERTEX", "[Box_1_1/Front][Box_1_1/Right][Box_1_1/Top]"))
-LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "Axis_1"), 10, 2)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")])
-Group_2_objects = [model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front")]
-Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
-Group_3_objects = [model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Top]")]
-Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
-Group_4 = model.addGroup(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_2")])
-Group_5_objects = [model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom"), model.selection("FACE", "LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front")]
-Group_5 = model.addGroup(Part_1_doc, Group_5_objects)
-Group_6_objects = [model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Back][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Left]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Right]"), model.selection("EDGE", "[LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Front][LinearCopy_1_1_2/MF:Translated_Face&Box_1_1/Top]")]
-Group_6 = model.addGroup(Part_1_doc, Group_6_objects)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Left"), model.selection("FACE", "LinearCopy_1_1_1/MF:Translated_Face&Box_1_1/Right"))
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1")], [model.selection("SOLID", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_1")])
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Fill_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
-Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
-Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
-model.end()
-
-from ModelAPI import *
-
-aFactory = ModelAPI_Session.get().validators()
-
-# groups related to original box should be split
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 3)
-assert(aFactory.validate(Group_1.feature()))
-
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 13)
-assert(aFactory.validate(Group_2.feature()))
-
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 19)
-assert(aFactory.validate(Group_3.feature()))
-
-# groups related to the copied box should contain only the elements connected with the original box
-selectionList = Group_4.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_4.feature()))
-
-selectionList = Group_5.feature().selectionList("group_list")
-assert(selectionList.size() == 3)
-assert(aFactory.validate(Group_5.feature()))
-
-selectionList = Group_6.feature().selectionList("group_list")
-assert(selectionList.size() == 3)
-assert(aFactory.validate(Group_6.feature()))
-
-
-model.begin()
-Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Fill_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Top"), model.selection("EDGE", "[Fill_1_1_2/Modified_Face&Box_1_1/Right][(Fill_1_1_2/Modified_Face&Box_1_1/Right)(Fill_1_1_2/Modified_Face&Plane_1/Plane_1)(Fill_1_1_2/Modified_Face&Box_1_1/Front)(Fill_1_1_2/Modified_Face&Box_1_1/Top)2(Fill_1_1_2/Modified_Face&Box_1_1/Left)2]")])
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_2")], [model.selection("FACE", "Filling_1_1")])
-model.do()
-# move groups to the end once again
-Part_1_doc.moveFeature(Group_1.feature(), Fill_2.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
-Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
-Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
-model.end()
-
-# groups related to original box should be split
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 4)
-assert(aFactory.validate(Group_1.feature()))
-
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 16)
-assert(aFactory.validate(Group_2.feature()))
-
-selectionList = Group_3.feature().selectionList("group_list")
-# one of edges should disappear, due to its belonging to the face of the filling
-assert(selectionList.size() == 18)
-assert(aFactory.validate(Group_3.feature()))
-
-# groups related to the copied box should be split correspondingly
-selectionList = Group_4.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_4.feature()))
-
-selectionList = Group_5.feature().selectionList("group_list")
-assert(selectionList.size() == 6)
-assert(aFactory.validate(Group_5.feature()))
-
-selectionList = Group_6.feature().selectionList("group_list")
-assert(selectionList.size() == 5)
-assert(aFactory.validate(Group_6.feature()))
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history.
-# Faces and edges of a box has been collected to groups. After that, the box has been symmetried.
-# Check that groups moved to the end contain corresponding results.
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
-Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
-Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
-Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
-Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
-Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("FACE", "Box_1_1/Left"), False)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Symmetry_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-from ModelAPI import *
-
-aFactory = ModelAPI_Session.get().validators()
-# check group 1: solids should be selected
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_1.feature()))
-# check group 2: number of faces is the same
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 6)
-assert(aFactory.validate(Group_2.feature()))
-# check group 3: number of edges is the same
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 12)
-assert(aFactory.validate(Group_3.feature()))
-
-model.begin()
-Symmetry_2 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Symmetry_1_1")], model.selection("VERTEX", "[Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Front][Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Left][Symmetry_1_1/MF:Symmetried_Face&Box_1_1/Bottom]"), True)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Symmetry_2.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-# check group 1: all solids in compound should be selected
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 2)
-assert(aFactory.validate(Group_1.feature()))
-# check group 2: number of faces is multiplied twice than original
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 12)
-assert(aFactory.validate(Group_2.feature()))
-# check group 3: number of edges is multiplied twice than original
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 24)
-assert(aFactory.validate(Group_3.feature()))
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history. Fillet operation.
-# Check the groups of initial solids moved to the end contain the corresponding
-# results, but divided.
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Box_1_1")])
-Group_2_objects = [model.selection("FACE", "Box_1_1/Back"), model.selection("FACE", "Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Bottom"), model.selection("FACE", "Box_1_1/Front")]
-Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
-Group_3_objects = [model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Back][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Left][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Top]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")]
-Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
-Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "[Box_1_1/Back][Box_1_1/Left][Box_1_1/Top]"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
-Group_4 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")])
-Group_5_objects = [model.selection("FACE", "Cylinder_1_1/Face_1"), model.selection("FACE", "Cylinder_1_1/Face_2"), model.selection("FACE", "Cylinder_1_1/Face_3")]
-Group_5 = model.addGroup(Part_1_doc, Group_5_objects)
-Group_6_objects = [model.selection("EDGE", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_2]"), model.selection("EDGE", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])")]
-Group_6 = model.addGroup(Part_1_doc, Group_6_objects)
-Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Box_1_1/Front][Box_1_1/Top]")], 2)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Fillet_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-model.end()
-
-from ModelAPI import *
-
-aFactory = ModelAPI_Session.get().validators()
-
-# groups related to original box should be split
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_1.feature()))
-
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 6)
-assert(aFactory.validate(Group_2.feature()))
-
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 11)
-assert(aFactory.validate(Group_3.feature()))
-
-model.begin()
-Fillet_2 = model.addFillet(Part_1_doc, [model.selection("FACE", "Cylinder_1_1/Face_2")], 2)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_4.feature(), Fillet_2.feature())
-Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
-Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
-model.end()
-
-# groups related to original cylinder should be split
-selectionList = Group_4.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_4.feature()))
-
-selectionList = Group_5.feature().selectionList("group_list")
-assert(selectionList.size() == 3)
-assert(aFactory.validate(Group_5.feature()))
-
-selectionList = Group_6.feature().selectionList("group_list")
-assert(selectionList.size() == 2) # edge selected for the fillet become removed
-assert(aFactory.validate(Group_6.feature()))
-
-model.begin()
-Fillet_3 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Fillet_1_1/MF:Fillet_Face&Box_1_1/Front][Fillet_1_1/MF:Fillet_Face&Box_1_1/Left]")], 1, 2)
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), Fillet_3.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
-Part_1_doc.moveFeature(Group_5.feature(), Group_4.feature())
-Part_1_doc.moveFeature(Group_6.feature(), Group_5.feature())
-model.end()
-
-# groups related to original box should be split
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_1.feature()))
-
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 6)
-assert(aFactory.validate(Group_2.feature()))
-
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 9)
-assert(aFactory.validate(Group_3.feature()))
-
-# groups related to original cylinder should stay untouched
-selectionList = Group_4.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_4.feature()))
-
-selectionList = Group_5.feature().selectionList("group_list")
-assert(selectionList.size() == 3)
-assert(aFactory.validate(Group_5.feature()))
-
-selectionList = Group_6.feature().selectionList("group_list")
-assert(selectionList.size() == 2)
-assert(aFactory.validate(Group_6.feature()))
-
-assert(model.checkPythonDump())
+++ /dev/null
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-# Test of deep nested results history. FuseFaces operation.
-# Check the groups of initial solids moved to the end contain the corresponding
-# results, but merged faces.
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
-Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1"), model.selection("SOLID", "Box_1_1")])
-Union_1_objects = [model.selection("SOLID", "Partition_1_1_1"), model.selection("SOLID", "Partition_1_1_2"), model.selection("SOLID", "Partition_1_1_3")]
-Union_1 = model.addUnion(Part_1_doc, Union_1_objects)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("SOLID", "Union_1_1")])
-Group_2_objects = [model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2"), model.selection("FACE", "Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3"), model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Back"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Bottom"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Top"), model.selection("FACE", "Box_1_1/Right"), model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), model.selection("FACE", "Box_1_1/Front")]
-Group_2 = model.addGroup(Part_1_doc, Group_2_objects)
-Group_3_objects = [model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3]"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1]"), model.selection("EDGE", "([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3])(Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1)([Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_3/Modified_Face&Box_1_1/Bottom])([Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right]"), model.selection("EDGE", "Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1"), model.selection("EDGE", "([Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1])([Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back])(Partition_1_1_3/Generated_Edge&Box_1_1/Back&Cylinder_1_1/Face_1)_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back]"), model.selection("EDGE", "([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3])([Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom])([Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("EDGE", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top]"), model.selection("EDGE", "([Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1])([Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Left])([Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left])_Union_1_1"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Right]"), model.selection("EDGE", "[Box_1_1/Right][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("EDGE", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("EDGE", "[Box_1_1/Right][Box_1_1/Front]"), model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Front]")]
-Group_3 = model.addGroup(Part_1_doc, Group_3_objects)
-Group_4_objects = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), model.selection("VERTEX", "[Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("VERTEX", "[_weak_name_10_Union_1_1]e[_weak_name_4_Union_1_1]e"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Box_1_1/Right][Box_1_1/Front]"), model.selection("VERTEX", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Left][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3][Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top&Cylinder_1_1/Face_2][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_2][Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Back]"), model.selection("VERTEX", "[Box_1_1/Right][Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]"), model.selection("VERTEX", "[_weak_name_3_Union_1_1]e[_weak_name_9_Union_1_1]e"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right]"), model.selection("VERTEX", "[Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_1][Partition_1_1_3/Modified_Face&Box_1_1/Back][Partition_1_1_1/Modified_Face&Cylinder_1_1/Face_3][Partition_1_1_3/Modified_Face&Box_1_1/Bottom][Partition_1_1_2/Modified_Face&Box_1_1/Bottom&Cylinder_1_1/Face_3]"), model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Back][Box_1_1/Right][Partition_1_1_3/Modified_Face&Box_1_1/Bottom]")]
-Group_4 = model.addGroup(Part_1_doc, Group_4_objects)
-FusionFaces_1 = model.addFusionFaces(Part_1_doc, model.selection("SOLID", "Union_1_1"))
-model.do()
-# move groups to the end
-Part_1_doc.moveFeature(Group_1.feature(), FusionFaces_1.feature())
-Part_1_doc.moveFeature(Group_2.feature(), Group_1.feature())
-Part_1_doc.moveFeature(Group_3.feature(), Group_2.feature())
-Part_1_doc.moveFeature(Group_4.feature(), Group_3.feature())
-model.end()
-
-from ModelAPI import *
-
-aFactory = ModelAPI_Session.get().validators()
-
-# number of solids should be the same
-selectionList = Group_1.feature().selectionList("group_list")
-assert(selectionList.size() == 1)
-assert(aFactory.validate(Group_1.feature()))
-
-# same-plane faces should be merged
-selectionList = Group_2.feature().selectionList("group_list")
-assert(selectionList.size() == 11)
-assert(aFactory.validate(Group_2.feature()))
-
-# shared edges of merged faces should be deleted
-selectionList = Group_3.feature().selectionList("group_list")
-assert(selectionList.size() == 15)
-assert(aFactory.validate(Group_3.feature()))
-
-selectionList = Group_4.feature().selectionList("group_list")
-assert(selectionList.size() == 10)
-assert(aFactory.validate(Group_4.feature()))
-
-assert(model.checkPythonDump())
