Issue #2027 Sketcher Trim Feature: unit-test for Trim of crossed W by a line.

diff --git a/src/SketchPlugin/Test/TestTrimLine02.py b/src/SketchPlugin/Test/TestTrimLine02.py
new file mode 100644 (file)
index 0000000..c10ce7c
--- /dev/null
+++ b/src/SketchPlugin/Test/TestTrimLine02.py
@@ -0,0 +1,73 @@
+from salome.shaper import model
+
+from ModelAPI import *
+from GeomDataAPI import *
+from ModelGeomAlgo import ModelGeomAlgo_Point2D
+from salome.shaper import geom
+import math
+
+TOLERANCE = 1.e-7
+
+SketchLineId = 'SketchLine'
+SketchConstraintCoincidenceId = 'SketchConstraintCoincidence'
+
+aSession = ModelAPI_Session.get()
+model.begin()
+partSet = model.moduleDocument()
+Part = model.addPart(partSet)
+Part_doc = Part.document()
+
+# Test1:begin split on arc with coincident point and intersection line : smaller part
+Sketch = model.addSketch(Part_doc, model.defaultPlane("XOZ"))
+# Test of inverted Arc
+SketchLine_1 = Sketch.addLine(10, 80, 40, 10)
+SketchLine_2 = Sketch.addLine(40, 10, 70, 80)
+SketchLine_3 = Sketch.addLine(70, 80, 100, 10)
+SketchLine_4 = Sketch.addLine(100, 10, 130, 80)
+
+SketchLine_intersecting = Sketch.addLine(10, 50, 130, 50)
+
+SketchConstraintCoincidence_1_1 = Sketch.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_1_2 = Sketch.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_1_3 = Sketch.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+
+GeomPoint = geom.Pnt2d(40, 50)
+
+#check number of features before trim
+#Sketch_feature = featureToCompositeFeature(Sketch.feature())
+#idList_before = []
+#for index in range(Sketch_feature.numberOfSubs()):
+#  idList_before.append(Sketch_feature.subFeature(index).getKind())
+
+#assert(idList_before.count(SketchLineId) == 3)
+#assert(idList_before.count(SketchConstraintCoincidenceId) == 2)
+
+#perform trim
+SketchTrim = Sketch.addTrim(SketchLine_intersecting, GeomPoint)
+SketchTrim.execute()
+model.do()
+
+#check number of features after trim
+#SketchFeatures = featureToCompositeFeature(Sketch.feature())
+#idList_after = []
+#for SubIndex in range(SketchFeatures.numberOfSubs()):
+#    SubFeature = SketchFeatures.subFeature(SubIndex)
+#    idList_after.append(SubFeature.getKind())
+
+#assert(idList_after.count(SketchLineId) == 3)
+#assert(idList_after.count(SketchConstraintCoincidenceId) == 2)
+
+#check if line points are the same
+#assert(SketchLine_1.startPoint().x() == 200)
+#assert(SketchLine_1.startPoint().y() == 20)
+#assert(SketchLine_1.endPoint().x() == 20)
+#assert(SketchLine_1.endPoint().y() == 70)
+
+#assert(SketchLine_3.startPoint().x() == -10)
+#assert(SketchLine_3.startPoint().y() == 190)
+#assert(SketchLine_3.endPoint().x() == 90)
+#assert(SketchLine_3.endPoint().y() == 50)
+
+model.end()
+
+#assert(model.checkPythonDump())