--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "h1", "15")
+model.addParameter(Part_1_doc, "h3", "7")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 24)
+SketchCircle_1.setAuxiliary(True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], "48/2")
+SketchCircle_2 = Sketch_1.addCircle(0, -24, 4)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_1.result())
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchCircle_2.results()[1], 4)
+SketchLine_2 = Sketch_1.addLine(-7.50000000000032, -15.81138830084174, -7.500000000000001, -27)
+SketchLine_2.setName("SketchLine_3")
+SketchLine_2.result().setName("SketchLine_3")
+SketchLine_3 = Sketch_1.addLine(-4.500000000000001, -30, 4.500000000000001, -30)
+SketchLine_3.setName("SketchLine_4")
+SketchLine_3.result().setName("SketchLine_4")
+SketchLine_4 = Sketch_1.addLine(7.500000000000001, -27, 7.49999999999943, -15.81138830084217)
+SketchLine_4.setName("SketchLine_5")
+SketchLine_4.result().setName("SketchLine_5")
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_2")
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchPoint_2 = Sketch_1.addPoint(0, -30)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_3.result())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_8")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_9")
+SketchProjection_3 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_5 = SketchProjection_3.createdFeature()
+SketchLine_5.setName("SketchLine_6")
+SketchLine_5.result().setName("SketchLine_6")
+SketchArc_1 = Sketch_1.addArc(-4.500000000000001, -27, -7.500000000000001, -27, -4.500000000000001, -30, False)
+SketchPoint_3 = Sketch_1.addPoint(-7.500000000000001, -30)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchLine_5.result(), 30, True)
+SketchPoint_3.setAuxiliary(True)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_2.result())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_11")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchPoint_3.coordinates(), SketchLine_3.result())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_12")
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.endPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_13")
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_14")
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
+SketchArc_2 = Sketch_1.addArc(4.500000000000001, -27, 4.500000000000001, -30, 7.500000000000001, -27, False)
+SketchPoint_4 = Sketch_1.addPoint(7.5, -30)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchPoint_3.coordinates(), SketchPoint_4.coordinates(), 15, False)
+SketchPoint_4.setAuxiliary(True)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_4.result())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_15")
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_4.coordinates(), SketchLine_3.result())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_16")
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.endPoint())
+SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_17")
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_18")
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_3.result())
+SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_1.results()[1], 3)
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_2.results()[1], SketchArc_1.results()[1])
+SketchArc_3 = Sketch_1.addArc(0, 0, 7.49999999999943, -15.81138830084217, 17.44306393762918, 1.410503622037278, False)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_3.center())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_10")
+SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_3.results()[1], "35/2")
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_4.endPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_20")
+SketchMultiRotation_1_objects = [SketchLine_2.result(), SketchArc_1.results()[1], SketchLine_3.result(), SketchArc_2.results()[1], SketchLine_4.result(), SketchCircle_2.results()[1]]
+SketchMultiRotation_1 = Sketch_1.addRotation(SketchMultiRotation_1_objects, SketchAPI_Line(SketchLine_5).startPoint(), 120, 3)
+[SketchLine_6, SketchLine_7, SketchArc_4, SketchArc_5, SketchLine_8, SketchLine_9, SketchArc_6, SketchArc_7, SketchLine_10, SketchLine_11, SketchCircle_3, SketchCircle_4] = SketchMultiRotation_1.rotated()
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchLine_10.setName("SketchLine_9")
+SketchLine_10.result().setName("SketchLine_9")
+SketchArc_6.setName("SketchArc_5")
+SketchArc_6.result().setName("SketchArc_5")
+SketchArc_6.results()[1].setName("SketchArc_5_2")
+SketchLine_9.setName("SketchLine_11")
+SketchLine_9.result().setName("SketchLine_11")
+SketchArc_5.setName("SketchArc_6")
+SketchArc_5.result().setName("SketchArc_6")
+SketchArc_5.results()[1].setName("SketchArc_6_2")
+SketchLine_7.setName("SketchLine_10")
+SketchLine_7.result().setName("SketchLine_10")
+SketchLine_6.setName("SketchLine_7")
+SketchLine_6.result().setName("SketchLine_7")
+SketchArc_8 = Sketch_1.addArc(0, 0, -17.4430639376291, 1.410503622038327, -7.50000000000032, -15.81138830084174, False)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_21")
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchArc_3.results()[1], SketchArc_8.results()[1])
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_8.center())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_19")
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_8.startPoint(), SketchLine_11.result())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_22")
+SketchArc_9 = Sketch_1.addArc(0, 0, 9.943063937629693, 14.40088467880386, -9.943063937628841, 14.40088467880445, False)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_23")
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_3.results()[1], SketchArc_9.results()[1])
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_9.center())
+SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_6.result())
+SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_26")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_3f-SketchArc_1_2f-SketchLine_4f-SketchArc_2_2f-SketchLine_5f-SketchArc_3_2f-SketchLine_7f-SketchArc_4_2f-SketchLine_9f-SketchArc_5_2f-SketchLine_9f-SketchArc_9_2f-SketchLine_10f-SketchArc_6_2f-SketchLine_11f-SketchArc_7_2f-SketchLine_12f-SketchArc_8_2f-SketchCircle_2_2r-SketchCircle_4_2r-SketchCircle_3_2r")], model.selection(), "h1", 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_12 = Sketch_2.addLine(-7.499999999996014, 12.99038105676981, 7.499999999996014, 12.99038105676981)
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_13 = Sketch_2.addLine(7.499999999996014, 12.99038105676981, 15, 0)
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_27")
+SketchLine_14 = Sketch_2.addLine(15, 0, 7.499999999996014, -12.99038105676981)
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_28")
+SketchLine_15 = Sketch_2.addLine(7.499999999996014, -12.99038105676981, -7.499999999996014, -12.99038105676981)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_29")
+SketchLine_16 = Sketch_2.addLine(-7.499999999996014, -12.99038105676981, -15, 0)
+SketchLine_16.setName("SketchLine_17")
+SketchLine_16.result().setName("SketchLine_17")
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
+SketchLine_17 = Sketch_2.addLine(-15, 0, -7.499999999996014, 12.99038105676981)
+SketchLine_17.setName("SketchLine_18")
+SketchLine_17.result().setName("SketchLine_18")
+SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_31")
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_17.endPoint())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_32")
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_12.result())
+SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_3")
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_15.result())
+SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_4")
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_18 = SketchProjection_4.createdFeature()
+SketchLine_18.setName("SketchLine_19")
+SketchLine_18.result().setName("SketchLine_19")
+SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_19 = SketchProjection_5.createdFeature()
+SketchLine_19.setName("SketchLine_20")
+SketchLine_19.result().setName("SketchLine_20")
+SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_18.result())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_34")
+SketchPoint_5 = Sketch_2.addPoint(-1.694065894508601e-21, 12.99038105676981)
+SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchPoint_5.coordinates(), SketchLine_12.result())
+SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_35")
+SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_12.result(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchPoint_5.coordinates(), SketchLine_19.result())
+SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_36")
+SketchPoint_6 = Sketch_2.addPoint(-2.541098841762901e-21, -12.99038105676981)
+SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchPoint_6.coordinates(), SketchLine_15.result())
+SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_37")
+SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchPoint_6.coordinates(), SketchLine_19.result())
+SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_38")
+SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchLine_15.result(), SketchPoint_6.coordinates())
+SketchCircle_5 = Sketch_2.addCircle(0, 0, 15)
+SketchCircle_5.setAuxiliary(True)
+SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_18).startPoint(), SketchCircle_5.center())
+SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_39")
+SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchCircle_5.results()[1])
+SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_40")
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchCircle_5.results()[1])
+SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_41")
+SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchCircle_5.results()[1])
+SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_42")
+SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchCircle_5.results()[1])
+SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
+SketchConstraintEqual_4 = Sketch_2.setEqual(SketchLine_17.result(), SketchLine_12.result())
+SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_15.result())
+SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_5.results()[1], 15)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_18r-SketchLine_17r-SketchLine_16r-SketchLine_15r-SketchLine_14r-SketchLine_13r")], model.selection(), "97-h3-h1", 0)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face"))
+SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_20 = SketchProjection_6.createdFeature()
+SketchLine_20.setName("SketchLine_21")
+SketchLine_20.result().setName("SketchLine_21")
+SketchCircle_6 = Sketch_3.addCircle(0, 0, 10)
+SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_20).startPoint(), SketchCircle_6.center())
+SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
+SketchConstraintRadius_6 = Sketch_3.setRadius(SketchCircle_6.results()[1], 10)
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_6_2f")], model.selection(), 0, 60, [model.selection("SOLID", "Extrusion_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/From_Face"))
+SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_21 = SketchProjection_7.createdFeature()
+SketchLine_21.setName("SketchLine_22")
+SketchLine_21.result().setName("SketchLine_22")
+SketchCircle_7 = Sketch_4.addCircle(0, 0, 12.5)
+SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_21).startPoint(), SketchCircle_7.center())
+SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
+SketchConstraintRadius_7 = Sketch_4.setRadius(SketchCircle_7.results()[1], "25/2")
+model.do()
+# check parameter is changed, so, FromFace becomes out of resulting solid, but Sketch_4 is still valid
+Extrusion_2.toSize().setValue(48)
+model.end()
+
+from ModelAPI import *
+aFactory = ModelAPI_Session.get().validators()
+assert(aFactory.validate(Sketch_4.feature()))
