## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
##
+# -*- coding: utf-8 -*-
+
from salome.shaper import model
model.begin()
SketchLine_11 = Sketch_1.addLine(-70, 0, -90, 0)
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_9.result())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_1.coordinates(), SketchLine_10.result(), 70)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_1.coordinates(), SketchLine_10.result(), 70, False)
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_10.result())
SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_2.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_4.result())
SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_4")
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_5")
-SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_9.startPoint(), SketchLine_1.result(), 80)
-SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_1.result(), 90)
-SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_1.result(), 85)
-SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.endPoint(), SketchLine_1.result(), 90)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_9.startPoint(), SketchLine_1.result(), 80, False)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_1.result(), 90, False)
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_1.result(), 85, False)
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.endPoint(), SketchLine_1.result(), 90, False)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_2.startPoint())
SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_10.result(), 190)
SketchConstraintLength_1.setName("SketchConstraintLength_3")
SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_13.result(), SketchLine_4.endPoint())
SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_17")
model.do()
-Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchLine_9r-SketchLine_10r-SketchLine_11r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 180, 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Revolution_1_1/From_Face_1"), 120, True)
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r")], model.selection("EDGE", "Sketch_1/SketchLine_1"), 180, 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Revolution_1_1/From_Face"), 120, True)
Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_1"), False)
SketchLine_14 = SketchProjection_1.createdFeature()
-SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"))
+SketchLine_14.setName("SketchLine_14")
+SketchLine_14.result().setName("SketchLine_14")
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
SketchLine_15 = SketchProjection_2.createdFeature()
-SketchLine_16 = Sketch_2.addLine(-15.00002401644285, 44.20204102886705, 14.99999932366307, 44.20204102886705)
+SketchLine_15.setName("SketchLine_15")
+SketchLine_15.result().setName("SketchLine_15")
+SketchLine_16 = Sketch_2.addLine(-15, 44.202041028867, 15, 44.20204102886701)
SketchLine_16.setName("SketchLine_24")
SketchLine_16.result().setName("SketchLine_24")
-SketchLine_17 = Sketch_2.addLine(-25, 88.20203643108667, -25, 54.20202402898175)
+SketchLine_17 = Sketch_2.addLine(-25, 88.20204102886699, -25, 54.202041028867)
SketchLine_17.setName("SketchLine_28")
SketchLine_17.result().setName("SketchLine_28")
-SketchLine_18 = Sketch_2.addLine(25, 54.2020551101737, 25, 88.20204066628929)
+SketchLine_18 = Sketch_2.addLine(25, 54.20204102886701, 25, 88.202041028867)
SketchLine_18.setName("SketchLine_26")
SketchLine_18.result().setName("SketchLine_26")
-SketchLine_19 = Sketch_2.addLine(14.99999814471567, 98.20204102886706, -15.00002220451297, 98.20204102886706)
+SketchLine_19 = Sketch_2.addLine(15, 98.202041028867, -15.00000000000001, 98.20204102886699)
SketchLine_19.setName("SketchLine_27")
SketchLine_19.result().setName("SketchLine_27")
-SketchLine_21 = Sketch_2.addLine(25, 98.20204102886706, -25, 98.20204102886706)
-SketchLine_21.setName("SketchLine_15")
-SketchLine_21.result().setName("SketchLine_15")
-SketchLine_21.setAuxiliary(True)
-SketchLine_20 = Sketch_2.addLine(25, 44.20204102886705, 25, 98.20204102886706)
-SketchLine_20.setName("SketchLine_18")
-SketchLine_20.result().setName("SketchLine_18")
+SketchLine_20 = Sketch_2.addLine(25, 98.20204102886706, -25, 98.20204102886706)
+SketchLine_20.setName("SketchLine_15")
+SketchLine_20.result().setName("SketchLine_15")
SketchLine_20.setAuxiliary(True)
-SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchLine_21 = Sketch_2.addLine(25, 44.20204102886705, 25, 98.20204102886706)
+SketchLine_21.setName("SketchLine_18")
+SketchLine_21.result().setName("SketchLine_18")
+SketchLine_21.setAuxiliary(True)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_20.startPoint())
SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_13")
SketchLine_22 = Sketch_2.addLine(-25, 98.20204102886706, -25, 44.20204102886705)
SketchLine_22.setName("SketchLine_16")
SketchLine_22.result().setName("SketchLine_16")
SketchLine_22.setAuxiliary(True)
-SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_22.startPoint())
SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_14")
SketchLine_23 = Sketch_2.addLine(-25, 44.20204102886705, 25, 44.20204102886705)
SketchLine_23.setName("SketchLine_17")
SketchLine_23.setAuxiliary(True)
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_15")
-SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_23.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_23.endPoint(), SketchLine_21.startPoint())
SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_16")
-SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_21.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_20.result())
+SketchConstraintHorizontal_6.setName("SketchConstraintHorizontal_6")
SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_22.result())
SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_23.result())
-SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_20.result())
-SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_21.result(), "l_percage")
+SketchConstraintHorizontal_7.setName("SketchConstraintHorizontal_7")
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_21.result())
+SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_20.result(), "l_percage")
SketchConstraintLength_6.setName("SketchConstraintLength_8")
-SketchConstraintLength_7 = Sketch_2.setLength(SketchLine_20.result(), 54)
+SketchConstraintLength_7 = Sketch_2.setLength(SketchLine_21.result(), 54)
SketchConstraintLength_7.setName("SketchConstraintLength_9")
-SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_14.result(), SketchLine_22.startPoint(), "l_percage/2")
-SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_19"))
+SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_14.result(), SketchLine_22.startPoint(), "l_percage/2", False)
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_19"), False)
SketchLine_24 = SketchProjection_3.createdFeature()
-SketchConstraintDistance_7 = Sketch_2.setDistance(SketchLine_24.result(), SketchLine_21.startPoint(), 20)
-SketchArc_1 = Sketch_2.addArc(-15, 54.20204102886705, -25, 54.20202402898175, -15.00002401644285, 44.20204102886705, False)
-SketchLine_25 = Sketch_2.addLine(-25, 98.20204102886706, -25, 54.20202402898175)
+SketchLine_24.setName("SketchLine_25")
+SketchLine_24.result().setName("SketchLine_25")
+SketchConstraintDistance_7 = Sketch_2.setDistance(SketchLine_24.result(), SketchLine_20.startPoint(), 20, False)
+SketchArc_1 = Sketch_2.addArc(-15, 54.202041028867, -25, 54.202041028867, -15, 44.202041028867, False)
+SketchLine_25 = Sketch_2.addLine(-25, 98.20204102886706, -25, 54.202041028867)
SketchLine_25.setName("SketchLine_22")
SketchLine_25.result().setName("SketchLine_22")
SketchLine_25.setAuxiliary(True)
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_25.endPoint())
-SketchLine_26 = Sketch_2.addLine(-15.00002401644285, 44.20204102886705, 25, 44.20204102886705)
+SketchLine_26 = Sketch_2.addLine(-15, 44.202041028867, 25, 44.20204102886705)
SketchLine_26.setName("SketchLine_21")
SketchLine_26.result().setName("SketchLine_21")
SketchLine_26.setAuxiliary(True)
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_22.startPoint(), SketchLine_25.startPoint())
SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_26.startPoint(), SketchLine_23.result())
SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_25.endPoint(), SketchLine_22.result())
-SketchArc_2 = Sketch_2.addArc(15, 54.20204102886705, 14.99999932366307, 44.20204102886705, 25, 54.2020551101737, False)
+SketchArc_2 = Sketch_2.addArc(15, 54.20204102886701, 15, 44.20204102886701, 25, 54.20204102886701, False)
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchArc_2.startPoint(), SketchLine_16.endPoint())
-SketchLine_27 = Sketch_2.addLine(25, 54.2020551101737, 25, 98.20204102886706)
+SketchLine_27 = Sketch_2.addLine(25, 54.20204102886701, 25, 98.20204102886706)
SketchLine_27.setName("SketchLine_23")
SketchLine_27.result().setName("SketchLine_23")
SketchLine_27.setAuxiliary(True)
SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_27.startPoint())
SketchConstraintTangent_3 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_27.result())
SketchConstraintTangent_4 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_16.result())
-SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_27.endPoint())
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_27.endPoint())
SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_26.startPoint(), SketchLine_16.startPoint())
-SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_27.startPoint(), SketchLine_20.result())
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_27.startPoint(), SketchLine_21.result())
SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_26.result())
-SketchArc_3 = Sketch_2.addArc(15, 88.20204102886704, 25, 88.20204066628929, 14.99999814471567, 98.20204102886706, False)
+SketchArc_3 = Sketch_2.addArc(15, 88.202041028867, 25, 88.202041028867, 15, 98.202041028867, False)
SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchArc_3.startPoint(), SketchLine_18.endPoint())
-SketchLine_28 = Sketch_2.addLine(14.99999814471567, 98.20204102886706, -25, 98.20204102886706)
+SketchLine_28 = Sketch_2.addLine(15, 98.202041028867, -25, 98.20204102886706)
SketchLine_28.setName("SketchLine_25")
SketchLine_28.result().setName("SketchLine_25")
SketchLine_28.setAuxiliary(True)
SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_28.startPoint())
SketchConstraintTangent_5 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_28.result())
SketchConstraintTangent_6 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_18.result())
-SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_28.endPoint())
SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_27.startPoint(), SketchLine_18.startPoint())
-SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_28.startPoint(), SketchLine_21.result())
+SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_28.startPoint(), SketchLine_20.result())
SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_27.result())
-SketchArc_4 = Sketch_2.addArc(-15, 88.20204102886706, -15.00002220451297, 98.20204102886706, -25, 88.20203643108667, False)
+SketchArc_4 = Sketch_2.addArc(-15, 88.20204102886699, -15.00000000000001, 98.20204102886699, -25, 88.20204102886699, False)
SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchArc_4.startPoint(), SketchLine_19.endPoint())
SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchArc_4.endPoint(), SketchLine_17.startPoint())
SketchConstraintTangent_7 = Sketch_2.setTangent(SketchArc_4.results()[1], SketchLine_19.result())
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_2.results()[1], 10)
SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_1.results()[1], 10)
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_24f-SketchLine_28f-SketchLine_26f-SketchLine_27f-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/To_Face_1"), -30, model.selection(), 0)
-Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_8"), "inclinaison")
-Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OZ"), "angle1")
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_24f-SketchArc_2_2f-SketchLine_26f-SketchArc_3_2f-SketchLine_27f-SketchArc_4_2f-SketchLine_28f-SketchArc_1_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/To_Face"), -30, model.selection(), 0)
+Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_24][Extrusion_1_1/From_Face]"), "inclinaison")
+Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Rotation_1_1")], model.selection("EDGE", "PartSet/OZ"), "angle1")
Recover_1 = model.addRecover(Part_1_doc, Rotation_2, [Rotation_1.result()])
Rotation_3 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1")], model.selection("EDGE", "PartSet/OZ"), "angle2")
Rotation_3.setName("Rotation_4")
Rotation_5 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_3_1")], model.selection("EDGE", "PartSet/OZ"), "-angle1")
Rotation_5.setName("Rotation_6")
Rotation_5.result().setName("Rotation_6_1")
-Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Rotation_4_1"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Rotation_6_1"), model.selection("SOLID", "Rotation_5_1")])
+Cut_1_objects_2 = [model.selection("SOLID", "Rotation_4_1"), model.selection("SOLID", "Rotation_2_1"), model.selection("SOLID", "Rotation_6_1"), model.selection("SOLID", "Rotation_5_1")]
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], Cut_1_objects_2)
+model.do()
model.end()
-assert(Boolean_1.result().shapeType() == 'SOLID')
+assert(Cut_1.result().shapeType() == 'SOLID')
assert(Part_1_doc.size("Bodies") == 1)
