Add translations 2

diff --git a/src/FeaturesPlugin/FeaturesPlugin_msg_en.ts b/src/FeaturesPlugin/FeaturesPlugin_msg_en.ts
index ef4c2db9e0ca4dbb0ebf9e65c6446f6a96f150c9..878270f01470f1b861ecd4bda9fb0fe1c1a81a8e 100644 (file)
--- a/src/FeaturesPlugin/FeaturesPlugin_msg_en.ts
+++ b/src/FeaturesPlugin/FeaturesPlugin_msg_en.ts
@@ -33,17 +33,991 @@
       <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
     </message>
     
+    <message>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation></translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>ExtrusionCut</name>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation>Base object for extrusion is not selected.</translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+      <translation>Selected objects contain element with unacceptable shape type.</translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+      <translation>Object is not selected.</translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+      <translation>Object is not selected.</translation>
+    </message>
+    
+    <message>
+      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+      <translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
+    </message>
+    <message>
+      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Base objects list contains vertex or edge, so attribute \"%1\" can not be used with default value. Select direction for extrusion.</source>
+      <translation>Base objects list contains vertex or edge, so attribute "%1" can not be used with default value. Select direction for extrusion.</translation>
+    </message>
+    <message>
+      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+      <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
+    </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation></translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>Revolution</name>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation>Revolution axis is not selected.</translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation>Revolution axis is not selected.</translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+      <translation>Object is not selected.</translation>
+    </message>
+    
+    <message>
+      <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+      <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+      <translation>ToAngle = -FromAngle.</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation>From face selection is invalid.</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation>To face selection is invalid.</translation>
+    </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>RevolutionCut</name>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation>Revolution axis is not selected.</translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation>Revolution axis is not selected.</translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+      <translation>Selected objects contain element with unacceptable shape type.</translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+      <translation>Object is not selected.</translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+      <translation>Object is not selected.</translation>
+    </message>
+    
+    <message>
+      <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+      <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+      <translation>ToAngle = -FromAngle.</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation>From face selection is invalid.</translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation>To face selection is invalid.</translation>
+    </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
-    <name>ExtrusionCut</name>
+    <name>ExtrusionFuse</name>
     <message>
       <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
       <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
     </message>
     <message>
       <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
-      <translation>Base object for extrusion is not selected.</translation>
+      <translation>Base objects for extrusion are not selected.</translation>
     </message>
     <message>
       <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
@@ -70,47 +1044,255 @@
       <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
       <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
     </message>
-  </context>
-  
-  <context>
-    <name>Revolution</name>
+
     <message>
-      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
-      <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
-      <translation>Revolution axis is not selected.</translation>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
-      <translation>Revolution axis is not selected.</translation>
+      <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
-      <translation>Object is not selected.</translation>
+      <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
     </message>
-    
     <message>
       <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
-      <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+      <translation></translation>
     </message>
     <message>
       <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
-      <translation>ToAngle = -FromAngle.</translation>
+      <translation></translation>
     </message>
     <message>
       <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
-      <translation>From face selection is invalid.</translation>
+      <translation></translation>
     </message>
     <message>
       <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
-      <translation>To face selection is invalid.</translation>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+      <translation></translation>
     </message>
   </context>
   
   <context>
-    <name>RevolutionCut</name>
+    <name>RevolutionFuse</name>
     <message>
       <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
       <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
@@ -149,103 +1331,315 @@
       <translation>From face selection is invalid.</translation>
     </message>
     <message>
-      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
-      <translation>To face selection is invalid.</translation>
+      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+      <translation>To face selection is invalid.</translation>
+    </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
     </message>
   </context>
-  
+
   <context>
-    <name>ExtrusionFuse</name>
+    <name>Boolean</name>
     <message>
-      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
-      <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
+      <source>GeomValidators_BooleanArguments: Not enough arguments</source>
+      <translation>Not enough arguments for the operation</translation>
     </message>
+
     <message>
-      <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
-      <translation>Base objects for extrusion are not selected.</translation>
+      <source>GeomValidators_BooleanArguments: Wrong number of arguments (expected 3).</source>
+      <translation>Wrong number of validator "GeomValidators_BooleanArguments" arguments (expected 3).</translation>
     </message>
+    
     <message>
-      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
-      <translation>Selected objects contain element with unacceptable shape type.</translation>
+      <source>Model_FeatureValidator: Attribute "bool_type" is not initialized.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
-      <translation>Object is not selected.</translation>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
-      <translation>Object is not selected.</translation>
+      <source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
+      <translation></translation>
     </message>
-    
     <message>
-      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
-      <translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Base objects list contains vertex or edge, so attribute \"%1\" can not be used with default value. Select direction for extrusion.</source>
-      <translation>Base objects list contains vertex or edge, so attribute "%1" can not be used with default value. Select direction for extrusion.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty attribute selection.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
-      <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty selection context.</source>
+      <translation></translation>
     </message>
-  </context>
-  
-  <context>
-    <name>RevolutionFuse</name>
     <message>
-      <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
-      <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Result construction not allowed for selection.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
-      <translation>Revolution axis is not selected.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty shape.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
-      <translation>Revolution axis is not selected.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
-      <translation>Selected objects contain element with unacceptable shape type.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
-      <translation>Object is not selected.</translation>
+      <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
-      <translation>Object is not selected.</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
+      <translation></translation>
     </message>
-    
     <message>
-      <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
-      <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty attribute selection.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
-      <translation>ToAngle = -FromAngle.</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty selection context.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
-      <translation>From face selection is invalid.</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Result construction not allowed for selection.</source>
+      <translation></translation>
     </message>
     <message>
-      <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
-      <translation>To face selection is invalid.</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty shape.</source>
+      <translation></translation>
     </message>
-  </context>
-
-  <context>
-    <name>Boolean</name>
     <message>
-      <source>GeomValidators_BooleanArguments: Not enough arguments</source>
-      <translation>Not enough arguments for the operation</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
+      <translation></translation>
     </message>
-
     <message>
-      <source>GeomValidators_BooleanArguments: Wrong number of arguments (expected 3).</source>
-      <translation>Wrong number of validator "GeomValidators_BooleanArguments" arguments (expected 3).</translation>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
+      <translation></translation>
     </message>
   </context>
   
@@ -264,6 +1658,27 @@
       <source>GeomValidators_MinObjectsSelected: Error: Could not get attribute \"%1\".</source>
       <translation>Objects not selected.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: This validator can only work with selection list in \"Partition\" feature.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: Only body shapes and construction planes are allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: Only body shapes and construction planes are allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: </source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
@@ -301,6 +1716,123 @@
       <source>FeaturesPlugin_ValidatorPipeLocations: Error: Number of locations should be the same as base objects.</source>
       <translation>Number of locations should be the same as base objects.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "path_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "binormal" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "locations_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: This validator can only work with path selector in \"Pipe\" feature.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: Local selection of wires not allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>binormal - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
@@ -334,6 +1866,75 @@
       <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Resulting shape is not valid.</source>
       <translation>Resulting shape is not valid.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "base_shape" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "subshapes" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: The object is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: The result is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_ShapeType: The shape is empty</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_BodyShapes: Error: Context is empty.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_BodyShapes: Error: Result construction selected.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_shape - GeomValidators_BodyShapes: Error: Attribute \"%1\" does not supported by this validator.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: This validator can only work with selection list in \"Remove Sub-Shapes\" feature.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Could not get \"%1\" attribute.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Empty context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Empty base shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Only sub-shapes of selected shape is allowed for selection.</source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
@@ -375,6 +1976,47 @@
       <source>tool_objects - GeomValidators_IntersectionSelection: Error: selected shape has the wrong type.</source>
       <translation>Selected shape has the wrong type.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: empty selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: empty attribute selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: empty selection context.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: empty feature.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: %1 shape is not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: empty shape.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: Local selection not allowed.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - GeomValidators_IntersectionSelection: Error: selected shape has the wrong type.</source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
@@ -404,7 +2046,17 @@
       <source>placement_objects_list - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
       <translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "placement_start_shape" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "placement_reverse_direction" is not initialized.</source>
+      <translation></translation>
+    </message>
   </context>
+  
   <context>
     <name>Rotation</name>
     <message>
@@ -448,7 +2100,29 @@
       <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
       <translation>Rotation axis is not selected.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "angle" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - FeaturesPlugin_ValidatorTransform: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
+      <translation></translation>
+    </message>
   </context>
+  
   <context>
     <name>Translation</name>
     <message>
@@ -477,17 +2151,30 @@
       <translation>The attribute with the %1 type is not processed</translation>
     </message>
     <message>
-      <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+      <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
       <translation>Translation axis is not selected.</translation>
     </message>
     <message>
-      <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+      <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
       <translation>Translation axis is not selected.</translation>
     </message>
+
     <message>
       <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
       <translation>Translation axis is not selected.</translation>
     </message>
+    <message>
+      <source>Model_FeatureValidator: Attribute "distance" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - FeaturesPlugin_ValidatorTransform: The attribute with the %1 type is not processed</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
+      <translation></translation>
+    </message>
   </context>
   
   <context>
@@ -504,6 +2191,11 @@
       <source>group_list - GeomValidators_BodyShapes: Error: Attribute \"%1\" does not supported by this validator.</source>
       <translation>Attribute "%1" does not supported by "GeomValidators_BodyShapes" validator.</translation>
     </message>
+    
+    <message>
+      <source>Model_FeatureValidator: Attribute "group_list" is not initialized.</source>
+      <translation></translation>
+    </message>
   </context>
 
   <context>
@@ -520,5 +2212,30 @@
       <source>FeaturesPlugin_ValidatorUnionArguments: Error: Not all shapes have shared topology.</source>
       <translation>Not all shapes have shared topology.</translation>
     </message>
+
+    <message>
+      <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorUnionSelection: Error: This validator can only work with selection list in \"%1\" feature.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>base_objects - FeaturesPlugin_ValidatorUnionSelection: Error: Whole compsolids not allowed for selection.</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_MinObjectsSelected: Error: Wrong number of arguments (expected 2): selection list id and min number of objects</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_MinObjectsSelected: Error: Could not get attribute \"%1\".</source>
+      <translation></translation>
+    </message>
+    <message>
+      <source>GeomValidators_MinObjectsSelected: Error: Attribute \"%1\" should contain at least %2 items.</source>
+      <translation></translation>
+    </message>
   </context>
 </TS>