* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
ListOfGO MakePipeTShape (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in boolean theHexMesh);
-
/*!
* Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
- *
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
in double theR2, in double theW2, in double theL2,
in boolean theHexMesh,
in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
-
/*!
* Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A chamfer is created
* on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- *
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theL2 Half-length of incident pipe
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
ListOfGO MakePipeTShapeChamfer (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theH, in double theW, in boolean theHexMesh);
-
/*!
* Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A chamfer is created
* on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
- *
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theL2 Half-length of incident pipe
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
in double theR2, in double theW2, in double theL2,
in double theH, in double theW, in boolean theHexMesh,
in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
-
/*!
* Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A fillet is created
* on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- *
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theRF Radius of curvature of fillet.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
ListOfGO MakePipeTShapeFillet (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRF, in boolean theHexMesh);
-
/*!
* Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A fillet is created
* on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
- *
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theRF Radius of curvature of fillet.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
in double theR2, in double theW2, in double theL2,
in double theRF, in boolean theHexMesh,
in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
-
/*@@ insert new functions before this line @@*/
};
myMainLayout->addWidget(JunctionPointsSel, rowNewPosVal, colNewPosVal, rowspanNewPosVal, colspanNewPosVal);
/***************************************************************/
- setHelpFileName("create_pipe_tshape_page.html");
+ setHelpFileName("create__pipetshape__page.html");
Init();
}
//=============================================================================
/*!
* MakePipeTShape
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length).
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
+ * MakePipeTShapeWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length).
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
+ * MakePipeTShapeChamfer
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A chamfer is created
+ * on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
- * The T-shape is placed at junction points P1, P2 and P3.
+ * MakePipeTShapeChamferWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A chamfer is created
+ * on the junction of the pipes.
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).A fillet is created on
- * the junction of the pipes.
+ * MakePipeTShapeFillet
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A fillet is created
+ * on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length). A fillet is created on
- * the junction of the pipes.
- * The T-shape is placed at junction points P1, P2 and P3.
+ * MakePipeTShapeFilletWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A fillet is created
+ * on the junction of the pipes.
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
+ * MakePipeTShape
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length).
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length).
- * The T-shape is placed at junction points P1, P2 and P3.
+ * MakePipeTShapeWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length).
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
+ * \param theP1 1st junction point of main pipe
+ * \param theP2 2nd junction point of main pipe
+ * \param theP3 Junction point of incident pipe
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length). A chamfer is created on
- * the junction of the pipes.
+ * MakePipeTShapeChamfer
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A chamfer is created
+ * on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theH Height of the chamfer.
- * \param theW Width of the chamfer.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theH Height of chamfer.
+ * \param theW Width of chamfer.
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length). A chamfer is created on
- * the junction of the pipes.
- * The T-shape is placed at junction points P1, P2 and P3.
+ * MakePipeTShapeChamferWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A chamfer is created
+ * on the junction of the pipes.
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theL2 Half-length of incident pipe
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
+ * \param theP1 1st junction point of main pipe
+ * \param theP2 2nd junction point of main pipe
+ * \param theP3 Junction point of incident pipe
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length). A fillet is created on
- * the junction of the pipes.
+ * MakePipeTShapeFillet
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A fillet is created
+ * on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theRF Radius of curvature of fillet.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
//=============================================================================
/*!
- * Create a T-shape object with specified caracteristics for the main and the
- * incident pipes (radius, width, half-length). A fillet is created on
- * the junction of the pipes.
- * The T-shape is placed at junction points P1, P2 and P3.
+ * MakePipeTShapeFilletWithPosition
+ * Create a T-shape object with specified caracteristics for the main and
+ * the incident pipes (radius, width, half-length). A fillet is created
+ * on the junction of the pipes.
+ * The extremities of the main pipe are located on junctions points P1 and P2.
+ * The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
- * \param theRF Radius of curvature of fillet.
- * \param theHexMesh false = no partition, true = with partition
+ * \param theRF Radius of curvature of fillet
+ * \param theHexMesh Boolean indicating if shape is prepared for hex mesh
+ * \param theP1 1st junction point of main pipe
+ * \param theP2 2nd junction point of main pipe
+ * \param theP3 Junction point of incident pipe
* \return List of GEOM_Objects, containing the created shape and propagation groups.
*/
//=============================================================================
## Create a T-shape object with specified caracteristics for the main
# and the incident pipes (radius, width, half-length).
- # Center of the shape is (0,0,0). The main plane of the T-shape is
- # XOY.
+ # The extremities of the main pipe are located on junctions points P1 and P2.
+ # The extremity of the incident pipe is located on junction point P3.
+ # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
+ # the main plane of the T-shape is XOY.
# @param theR1 Internal radius of main pipe
# @param theW1 Width of main pipe
# @param theL1 Half-length of main pipe
# @param theR2 Internal radius of incident pipe (R2 < R1)
# @param theW2 Width of incident pipe (R2+W2 < R1+W1)
# @param theL2 Half-length of incident pipe
- # @param theHexMesh false = no partition, true = with partition (default=true)
+ # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
# @param theP1 1st junction point of main pipe
# @param theP2 2nd junction point of main pipe
# @param theP3 Junction point of incident pipe
# @return List of GEOM_Objects, containing the created shape and propagation groups.
#
- # @ref tui_creation_tshape "Example"
+ # @ref tui_creation_pipetshape "Example"
def MakePipeTShape(self, theR1, theW1, theL1, theR2, theW2, theL2, theHexMesh=True, theP1=None, theP2=None, theP3=None):
theR1, theW1, theL1, theR2, theW2, theL2, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2)
if (theP1 and theP2 and theP3):
## Create a T-shape object with specified caracteristics for the main
# and the incident pipes (radius, width, half-length). A chamfer is
# created on the junction of the pipes.
- # Center of the shape is (0,0,0). The main plane of the T-shape is
- # XOY.
+ # The extremities of the main pipe are located on junctions points P1 and P2.
+ # The extremity of the incident pipe is located on junction point P3.
+ # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
+ # the main plane of the T-shape is XOY.
# @param theR1 Internal radius of main pipe
# @param theW1 Width of main pipe
# @param theL1 Half-length of main pipe
# @param theL2 Half-length of incident pipe
# @param theH Height of the chamfer.
# @param theW Width of the chamfer.
- # @param theHexMesh false = no partition, true = with partition (default=true)
+ # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
# @param theP1 1st junction point of main pipe
# @param theP2 2nd junction point of main pipe
# @param theP3 Junction point of incident pipe
# @return List of GEOM_Objects, containing the created shape and propagation groups.
#
- # @ref tui_creation_tshape "Example"
+ # @ref tui_creation_pipetshape "Example"
def MakePipeTShapeChamfer(self, theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, theHexMesh=True, theP1=None, theP2=None, theP3=None):
theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theH, theW)
if (theP1 and theP2 and theP3):
## Create a T-shape object with specified caracteristics for the main
# and the incident pipes (radius, width, half-length). A fillet is
# created on the junction of the pipes.
- # Center of the shape is (0,0,0). The main plane of the T-shape is
- # XOY.
+ # The extremities of the main pipe are located on junctions points P1 and P2.
+ # The extremity of the incident pipe is located on junction point P3.
+ # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
+ # the main plane of the T-shape is XOY.
# @param theR1 Internal radius of main pipe
# @param theW1 Width of main pipe
# @param theL1 Half-length of main pipe
# @param theW2 Width of incident pipe (R2+W2 < R1+W1)
# @param theL2 Half-length of incident pipe
# @param theRF Radius of curvature of fillet.
- # @param theHexMesh false = no partition, true = with partition (default=true)
+ # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
# @param theP1 1st junction point of main pipe
# @param theP2 2nd junction point of main pipe
# @param theP3 Junction point of incident pipe
# @return List of GEOM_Objects, containing the created shape and propagation groups.
#
- # @ref tui_creation_tshape "Example"
+ # @ref tui_creation_pipetshape "Example"
def MakePipeTShapeFillet(self, theR1, theW1, theL1, theR2, theW2, theL2, theRF, theHexMesh=True, theP1=None, theP2=None, theP3=None):
theR1, theW1, theL1, theR2, theW2, theL2, theRF, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theRF)
if (theP1 and theP2 and theP3):
