--- /dev/null
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(50, 70, 50, 9.237629881196027)
+SketchLine_1.setName("SketchLine_10")
+SketchLine_1.result().setName("SketchLine_10")
+SketchLine_2 = Sketch_1.addLine(41.99999565114199, -4.618804664331344, -53.92304845413265, -59.99999999999996)
+SketchLine_2.setName("SketchLine_11")
+SketchLine_2.result().setName("SketchLine_11")
+SketchLine_3 = Sketch_1.addLine(50, 70, 50, 0)
+SketchLine_3.setName("SketchLine_1")
+SketchLine_3.result().setName("SketchLine_1")
+SketchLine_3.setAuxiliary(True)
+SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -59.99999999999996)
+SketchLine_4.setName("SketchLine_2")
+SketchLine_4.result().setName("SketchLine_2")
+SketchLine_4.setAuxiliary(True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(44, 9.237575007509296, 44, 70)
+SketchLine_5.setName("SketchLine_8")
+SketchLine_5.result().setName("SketchLine_8")
+SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -59.99999999999996, -56.92304845413265, -54.80384757729332)
+SketchLine_6.setName("SketchLine_3")
+SketchLine_6.result().setName("SketchLine_3")
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39.00000555191657, 0.5773534745901636)
+SketchLine_7.setName("SketchLine_9")
+SketchLine_7.result().setName("SketchLine_9")
+SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137769)
+SketchLine_8.setName("SketchLine_4")
+SketchLine_8.result().setName("SketchLine_4")
+SketchLine_8.setAuxiliary(True)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(44, 3.464101615137769, 44, 70)
+SketchLine_9.setName("SketchLine_5")
+SketchLine_9.result().setName("SketchLine_5")
+SketchLine_9.setAuxiliary(True)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchLine_10 = Sketch_1.addLine(44, 70, 50, 70)
+SketchLine_10.setName("SketchLine_6")
+SketchLine_10.result().setName("SketchLine_6")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_10.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), 6)
+SketchLine_11 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_11.setName("SketchLine_7")
+SketchLine_11.result().setName("SketchLine_7")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50)
+SketchArc_1 = Sketch_1.addArc(34, 9.23760430703403, 39.00000555191657, 0.5773534745901636, 44, 9.237575007509296, False)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_5.endPoint())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_9.result())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
+SketchArc_2 = Sketch_1.addArc(34, 9.237604307034017, 41.99999565114199, -4.618804664331344, 50, 9.237629881196027, False)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_2.endPoint())
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_4.result())
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70)
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_2.result(), SketchLine_6.result())
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6)
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_7.result())
+SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 120)
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120)
+SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
+SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
+SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_2.addCircle(0, 0, 17.5)
+SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_1.result())
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], 17.5)
+SketchConstraintRadius_3.setName("SketchConstraintRadius_1")
+SketchCircle_2 = Sketch_2.addCircle(0, 0, 14.5)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
+SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_2.results()[1], 14.5)
+SketchConstraintRadius_4.setName("SketchConstraintRadius_2")
+model.do()
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_13 = Sketch_3.addLine(-22, 70, -22, -35.79571668975675)
+SketchLine_14 = Sketch_3.addLine(-22, -35.79571668975675, 55, 8.660254037844405)
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchLine_15 = Sketch_3.addLine(55, 8.660254037844405, 55, 70)
+SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchLine_16 = Sketch_3.addLine(55, 70, -22, 70)
+SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
+SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result())
+SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
+SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
+SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1)
+SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55)
+SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22)
+SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
+Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
+SketchLine_20 = Sketch_4.addLine(-4, 37.99998118249049, -4, 21.27189364217905)
+SketchLine_20.setName("SketchLine_36")
+SketchLine_20.result().setName("SketchLine_36")
+SketchArc_3 = Sketch_4.addArc(0.03759597704170694, 0.09256566148481651, -8.5, 15.29705854077836, -7.430380313394083, 15.84999181264236, True)
+SketchArc_3.setName("SketchArc_6")
+SketchArc_3.result().setName("SketchArc_6")
+SketchArc_3.results()[1].setName("SketchArc_6_2")
+SketchArc_4 = Sketch_4.addArc(-0.08847833993119963, -0.2092058473112947, 7.448738798736517, 15.83437708398516, 8.5, 15.29705854077835, True)
+SketchArc_4.setName("SketchArc_8")
+SketchArc_4.result().setName("SketchArc_8")
+SketchArc_4.results()[1].setName("SketchArc_8_2")
+SketchLine_21 = Sketch_4.addLine(4, 21.26494484096588, 4, 37.99999998819019)
+SketchLine_21.setName("SketchLine_38")
+SketchLine_21.result().setName("SketchLine_38")
+SketchLine_22 = Sketch_4.addLine(-8.5, 15.29705854077836, -8.5, 12.23281708580693)
+SketchLine_23 = Sketch_4.addLine(-10.1, 44, -9.999976547916727, 44)
+SketchLine_23.setName("SketchLine_37")
+SketchLine_23.result().setName("SketchLine_37")
+SketchLine_24 = Sketch_4.addLine(9.999996841999446, 44, 10.1, 44)
+SketchLine_24.setName("SketchLine_39")
+SketchLine_24.result().setName("SketchLine_39")
+SketchLine_25 = Sketch_4.addLine(8.5, 12.23281708580693, 8.5, 15.29705854077835)
+SketchLine_25.setName("SketchLine_24")
+SketchLine_25.result().setName("SketchLine_24")
+SketchLine_27 = Sketch_4.addLine(4, 44.00000000000001, 10.1, 44)
+SketchLine_27.setAuxiliary(True)
+SketchLine_26 = Sketch_4.addLine(4, 17.03870823911452, 4, 44.00000000000001)
+SketchLine_26.setAuxiliary(True)
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
+SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45.00000000000001)
+SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
+SketchLine_29 = Sketch_4.addLine(10.1, 45.00000000000001, -10.1, 45)
+SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
+SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44)
+SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_36")
+SketchLine_31 = Sketch_4.addLine(-10.1, 44, -4, 44.00000000000001)
+SketchLine_31.setAuxiliary(True)
+SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_37")
+SketchLine_32 = Sketch_4.addLine(-4, 44.00000000000001, -4, 17.05620228544792)
+SketchLine_32.setName("SketchLine_20")
+SketchLine_32.result().setName("SketchLine_20")
+SketchLine_32.setAuxiliary(True)
+SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_31.endPoint())
+SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_38")
+SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_32.result())
+SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_26.result())
+SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_29.result())
+SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_31.result())
+SketchConstraintHorizontal_5 = Sketch_4.setHorizontal(SketchLine_27.result())
+SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_30.result())
+SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_28.result())
+SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_25.result())
+SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_22.result())
+SketchLine_33 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_33.setName("SketchLine_32")
+SketchLine_33.result().setName("SketchLine_32")
+SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5)
+SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
+SketchPoint_2 = Sketch_4.addPoint(0.0367430766441097, 12.3548825983447)
+SketchLine_34 = Sketch_4.addLine(-8.5, 12.23281708580693, 8.5, 12.23281708580693)
+SketchLine_34.setName("SketchLine_33")
+SketchLine_34.result().setName("SketchLine_33")
+SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_39")
+SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_34.result())
+SketchPoint_3 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchArc_5 = Sketch_4.addArc(0.0375959770412408, 0.09256566148573138, -8.5, 15.29705854077836, -4, 17.05620228544792, True)
+SketchArc_5.setName("SketchArc_4")
+SketchArc_5.result().setName("SketchArc_4")
+SketchArc_5.results()[1].setName("SketchArc_4_2")
+SketchArc_5.setAuxiliary(True)
+SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchArc_5.startPoint())
+SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_41")
+SketchArc_6 = Sketch_4.addArc(-0.08847833993497614, -0.2092058473187996, 4, 17.03870823911452, 8.5, 15.29705854077835, True)
+SketchArc_6.setName("SketchArc_5")
+SketchArc_6.result().setName("SketchArc_5")
+SketchArc_6.results()[1].setName("SketchArc_5_2")
+SketchArc_6.setAuxiliary(True)
+SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.endPoint())
+SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_42")
+SketchPoint_4 = Sketch_4.addPoint(-4, 17.05620228544792)
+SketchPoint_5 = Sketch_4.addPoint(4, 17.03870823911452)
+SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchPoint_4.coordinates())
+SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchArc_6.startPoint(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
+SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_40")
+SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_26.startPoint())
+SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
+SketchArc_7 = Sketch_4.addArc(-10, 21.27189688984679, -7.430380313394083, 15.84999181264236, -4, 21.27189364217905, False)
+SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
+SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
+SketchLine_35 = Sketch_4.addLine(-4, 44.00000000000001, -4, 21.27189364217905)
+SketchLine_35.setName("SketchLine_34")
+SketchLine_35.result().setName("SketchLine_34")
+SketchLine_35.setAuxiliary(True)
+SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_7.endPoint(), SketchLine_35.endPoint())
+SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
+SketchConstraintTangent_5 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_35.result())
+SketchConstraintTangent_6 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchArc_3.results()[1])
+SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_47")
+SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_5.startPoint(), SketchArc_3.startPoint())
+SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_49")
+SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchArc_3.results()[1])
+SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_32.result())
+SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_50")
+SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchArc_3.endPoint(), SketchArc_5.results()[1])
+SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_51")
+SketchArc_8 = Sketch_4.addArc(10, 21.26494485199291, 4, 21.26494484096588, 7.448738798736517, 15.83437708398516, False)
+SketchArc_8.setName("SketchArc_9")
+SketchArc_8.result().setName("SketchArc_9")
+SketchArc_8.results()[1].setName("SketchArc_9_2")
+SketchLine_36 = Sketch_4.addLine(4, 21.26494484096588, 4, 44.00000000000001)
+SketchLine_36.setName("SketchLine_35")
+SketchLine_36.result().setName("SketchLine_35")
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_8.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchArc_8.endPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_53")
+SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchArc_4.results()[1])
+SketchConstraintTangent_9 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_36.result())
+SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchArc_6.endPoint(), SketchArc_4.endPoint())
+SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_54")
+SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_36.endPoint())
+SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_55")
+SketchConstraintTangent_10 = Sketch_4.setTangent(SketchArc_6.results()[1], SketchArc_4.results()[1])
+SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchArc_6.results()[1])
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_56")
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_26.result())
+SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
+SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
+SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"))
+SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
+SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
+SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
+SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
+SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
+SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
+SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5)
+SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4)
+SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4)
+SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
+SketchArc_9 = Sketch_4.addArc(-10, 37.99999999999999, -4, 37.99998118249049, -9.999976547916727, 44, False)
+SketchArc_9.setName("SketchArc_10")
+SketchArc_9.result().setName("SketchArc_10")
+SketchArc_9.results()[1].setName("SketchArc_10_2")
+SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchArc_9.startPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_9.endPoint(), SketchLine_23.endPoint())
+SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_62")
+SketchConstraintTangent_11 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_20.result())
+SketchConstraintTangent_12 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_23.result())
+SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_20.endPoint())
+SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_63")
+SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_64")
+SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_20.startPoint(), SketchLine_35.result())
+SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_65")
+SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_31.result())
+SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_66")
+SketchArc_10 = Sketch_4.addArc(10, 37.99999999999996, 9.999996841999446, 44, 4, 37.99999998819019, False)
+SketchArc_10.setName("SketchArc_11")
+SketchArc_10.result().setName("SketchArc_11")
+SketchArc_10.results()[1].setName("SketchArc_11_2")
+SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_10.startPoint(), SketchLine_24.startPoint())
+SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_67")
+SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_10.endPoint(), SketchLine_21.endPoint())
+SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_68")
+SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_21.result())
+SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_24.result())
+SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_69")
+SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_24.endPoint())
+SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_70")
+SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_36.result())
+SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_71")
+SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_27.result())
+SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_72")
+SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
+SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
+SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1)
+SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
+SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1)
+SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
+SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_37.setName("SketchLine_40")
+SketchLine_37.result().setName("SketchLine_40")
+SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44)
+SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
+SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1)
+SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
+SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1)
+SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
+Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
+Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
+Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
+Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
+Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
+SketchLine_38.setName("SketchLine_41")
+SketchLine_38.result().setName("SketchLine_41")
+SketchPoint_6 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
+SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_6.result())
+SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_73")
+SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
+SketchLine_39.setName("SketchLine_42")
+SketchLine_39.result().setName("SketchLine_42")
+SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
+model.do()
+Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False)
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_40 = Sketch_6.addLine(4, 12.99999833620712, 4, 12.89999999999998)
+SketchLine_40.setName("SketchLine_55")
+SketchLine_40.result().setName("SketchLine_55")
+SketchLine_41 = Sketch_6.addLine(4, 12.89999999999998, -4, 12.89999999999998)
+SketchLine_41.setName("SketchLine_44")
+SketchLine_41.result().setName("SketchLine_44")
+SketchLine_42 = Sketch_6.addLine(4, 18.99999999999998, 4, 12.89999999999998)
+SketchLine_42.setName("SketchLine_43")
+SketchLine_42.result().setName("SketchLine_43")
+SketchLine_42.setAuxiliary(True)
+SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_41.startPoint())
+SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_74")
+SketchLine_43 = Sketch_6.addLine(-4, 12.89999999999998, -4, 13.0000014806823)
+SketchLine_43.setName("SketchLine_52")
+SketchLine_43.result().setName("SketchLine_52")
+SketchLine_44 = Sketch_6.addLine(-9.999992772985484, 18.99999999999998, -10.09999999999998, 18.99999999999998)
+SketchLine_44.setName("SketchLine_53")
+SketchLine_44.result().setName("SketchLine_53")
+SketchLine_45 = Sketch_6.addLine(-4, 12.89999999999998, -4, 18.99999999999998)
+SketchLine_45.setAuxiliary(True)
+SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
+SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_75")
+SketchLine_46 = Sketch_6.addLine(10.10000000000002, 18.99999999999998, 10.00002047508484, 18.99999999999998)
+SketchLine_46.setName("SketchLine_54")
+SketchLine_46.result().setName("SketchLine_54")
+SketchLine_47 = Sketch_6.addLine(-4, 18.99999999999998, -10.09999999999998, 18.99999999999998)
+SketchLine_47.setName("SketchLine_46")
+SketchLine_47.result().setName("SketchLine_46")
+SketchLine_47.setAuxiliary(True)
+SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_76")
+SketchLine_48 = Sketch_6.addLine(-10.09999999999998, 18.99999999999998, -10.09999999999998, 19.79999999999998)
+SketchLine_48.setName("SketchLine_47")
+SketchLine_48.result().setName("SketchLine_47")
+SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
+SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_77")
+SketchLine_49 = Sketch_6.addLine(-10.09999999999998, 19.79999999999998, 10.09999999999999, 19.79999999999998)
+SketchLine_49.setName("SketchLine_48")
+SketchLine_49.result().setName("SketchLine_48")
+SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_78")
+SketchLine_50 = Sketch_6.addLine(10.09999999999999, 19.79999999999998, 10.10000000000002, 18.99999999999998)
+SketchLine_50.setName("SketchLine_49")
+SketchLine_50.result().setName("SketchLine_49")
+SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
+SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_79")
+SketchLine_51 = Sketch_6.addLine(10.10000000000002, 18.99999999999998, 4, 18.99999999999998)
+SketchLine_51.setName("SketchLine_50")
+SketchLine_51.result().setName("SketchLine_50")
+SketchLine_51.setAuxiliary(True)
+SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
+SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_80")
+SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_42.startPoint(), SketchLine_51.endPoint())
+SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_81")
+SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_45.result())
+SketchConstraintVertical_12 = Sketch_6.setVertical(SketchLine_42.result())
+SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_41.result())
+SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_47.result())
+SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_51.result())
+SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
+SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
+SketchConstraintDistance_19 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8)
+SketchConstraintDistance_19.setName("SketchConstraintDistance_20")
+SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8)
+SketchConstraintDistance_20.setName("SketchConstraintDistance_21")
+SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41"))
+SketchLine_52.setName("SketchLine_51")
+SketchLine_52.result().setName("SketchLine_51")
+SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4)
+SketchConstraintDistance_21.setName("SketchConstraintDistance_22")
+SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4)
+SketchConstraintDistance_22.setName("SketchConstraintDistance_23")
+SketchArc_11 = Sketch_6.addArc(-10, 12.99999999999983, -4, 13.0000014806823, -9.999992772985484, 18.99999999999998, False)
+SketchArc_11.setName("SketchArc_12")
+SketchArc_11.result().setName("SketchArc_12")
+SketchArc_11.results()[1].setName("SketchArc_12_2")
+SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_43.endPoint())
+SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_82")
+SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_83")
+SketchConstraintTangent_15 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_43.result())
+SketchConstraintTangent_16 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_44.result())
+SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_84")
+SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_44.endPoint())
+SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_85")
+SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
+SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_86")
+SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_47.result())
+SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_87")
+SketchArc_12 = Sketch_6.addArc(10.00000000000004, 12.99999999999978, 10.00002047508484, 18.99999999999998, 4, 12.99999833620712, False)
+SketchArc_12.setName("SketchArc_13")
+SketchArc_12.result().setName("SketchArc_13")
+SketchArc_12.results()[1].setName("SketchArc_13_2")
+SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_46.endPoint())
+SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_88")
+SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_40.startPoint())
+SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_89")
+SketchConstraintTangent_17 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_46.result())
+SketchConstraintTangent_18 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_40.result())
+SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_46.startPoint())
+SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_90")
+SketchConstraintCoincidence_85 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_40.endPoint())
+SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_91")
+SketchConstraintCoincidence_86 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_51.result())
+SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_92")
+SketchConstraintCoincidence_87 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_42.result())
+SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_93")
+SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
+SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
+SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1)
+SketchConstraintDistance_23.setName("SketchConstraintDistance_24")
+SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1)
+SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
+SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
+SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1)
+SketchConstraintDistance_25.setName("SketchConstraintDistance_26")
+SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
+SketchLine_53.setName("SketchLine_56")
+SketchLine_53.result().setName("SketchLine_56")
+SketchConstraintCoincidence_88 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
+SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_94")
+model.do()
+Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
+Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
+Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
+Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
+Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7"))
+SketchLine_54 = Sketch_7.addLine(55, -9.237629881196027, 55, -60.00000049730294)
+SketchLine_54.setName("SketchLine_66")
+SketchLine_54.result().setName("SketchLine_66")
+SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/To_Face_1"))
+SketchLine_55 = Sketch_7.addLine(55, -9.237629881196027, 55, -70)
+SketchLine_55.setName("SketchLine_57")
+SketchLine_55.result().setName("SketchLine_57")
+SketchLine_55.setAuxiliary(True)
+SketchConstraintCoincidence_89 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_7.result())
+SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_95")
+SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/To_Face_1"))
+SketchConstraintCoincidence_90 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_8.result())
+SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_96")
+SketchLine_56 = Sketch_7.addLine(45.00000744821924, -70, -45.00000429345155, -70)
+SketchLine_56.setName("SketchLine_67")
+SketchLine_56.result().setName("SketchLine_67")
+SketchLine_57 = Sketch_7.addLine(55, -70, -55, -70)
+SketchLine_57.setName("SketchLine_58")
+SketchLine_57.result().setName("SketchLine_58")
+SketchLine_57.setAuxiliary(True)
+SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
+SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_97")
+SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/From_Face_1"))
+SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_9.result())
+SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
+SketchLine_58 = Sketch_7.addLine(-55, -60.00001819955111, -55, -9.237629881196027)
+SketchLine_58.setName("SketchLine_68")
+SketchLine_58.result().setName("SketchLine_68")
+SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237629881196027)
+SketchLine_59.setAuxiliary(True)
+SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
+SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
+SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/From_Face_1"))
+SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_10.result())
+SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
+SketchLine_60 = Sketch_7.addLine(-55, -9.237629881196027, -61.32702426187202, -9.237629881196027)
+SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
+SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_101")
+SketchLine_61 = Sketch_7.addLine(-61.32702426187202, -9.237629881196027, -61.32702426187202, -75.68652656141983)
+SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
+SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_102")
+SketchLine_62 = Sketch_7.addLine(-61.32702426187202, -75.68652656141983, 60.38641987912783, -75.68652656141983)
+SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
+SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_103")
+SketchLine_63 = Sketch_7.addLine(60.38641987912783, -75.68652656141983, 60.38641987912783, -9.237629881196027)
+SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
+SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_104")
+SketchLine_64 = Sketch_7.addLine(60.38641987912783, -9.237629881196027, 55, -9.237629881196027)
+SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
+SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_105")
+SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
+SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_106")
+SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchLine_64.endPoint())
+SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_107")
+SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_64.result())
+SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_60.result())
+SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_62.result())
+SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_61.result())
+SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_63.result())
+SketchArc_13 = Sketch_7.addArc(45, -60, 45.00000744821924, -70, 55, -60.00000049730294, False)
+SketchArc_13.setName("SketchArc_14")
+SketchArc_13.result().setName("SketchArc_14")
+SketchArc_13.results()[1].setName("SketchArc_14_2")
+SketchLine_65 = Sketch_7.addLine(45.00000744821924, -70, -55, -70)
+SketchLine_65.setAuxiliary(True)
+SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
+SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_108")
+SketchConstraintCoincidence_103 = Sketch_7.setCoincident(SketchArc_13.endPoint(), SketchLine_54.endPoint())
+SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_109")
+SketchConstraintTangent_19 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_65.result())
+SketchConstraintTangent_20 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_54.result())
+SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_65.endPoint())
+SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_110")
+SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_54.startPoint())
+SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_111")
+SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_57.result())
+SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_112")
+SketchConstraintCoincidence_107 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
+SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_113")
+SketchArc_14 = Sketch_7.addArc(-45, -59.99999999999999, -55, -60.00001819955111, -45.00000429345155, -70, False)
+SketchArc_14.setName("SketchArc_15")
+SketchArc_14.result().setName("SketchArc_15")
+SketchArc_14.results()[1].setName("SketchArc_15_2")
+SketchConstraintCoincidence_108 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_58.startPoint())
+SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_114")
+SketchConstraintCoincidence_109 = Sketch_7.setCoincident(SketchArc_14.endPoint(), SketchLine_56.endPoint())
+SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_115")
+SketchConstraintTangent_21 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_56.result())
+SketchConstraintTangent_22 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_58.result())
+SketchConstraintCoincidence_110 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_56.startPoint())
+SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_116")
+SketchConstraintCoincidence_111 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.endPoint())
+SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_117")
+SketchConstraintCoincidence_112 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_65.result())
+SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_118")
+SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
+SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_119")
+SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_13.results()[1], 10)
+SketchConstraintRadius_12 = Sketch_7.setRadius(SketchArc_14.results()[1], 10)
+SketchCircle_4 = Sketch_7.addCircle(44, -59, 5)
+SketchCircle_5 = Sketch_7.addCircle(-43.99999999999999, -58.99999999999999, 5)
+SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
+SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
+SketchConstraintDistance_26 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11)
+SketchConstraintDistance_26.setName("SketchConstraintDistance_27")
+SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11)
+SketchConstraintDistance_27.setName("SketchConstraintDistance_28")
+SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11)
+SketchConstraintDistance_28.setName("SketchConstraintDistance_29")
+SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11)
+SketchConstraintDistance_29.setName("SketchConstraintDistance_30")
+SketchCircle_6 = Sketch_7.addCircle(44.00000000000001, -20.23762988119603, 5)
+SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
+SketchCircle_7 = Sketch_7.addCircle(-44.00000000000001, -20.23762988119603, 5)
+SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
+SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11)
+SketchConstraintDistance_30.setName("SketchConstraintDistance_31")
+SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6"))
+SketchLine_66.setName("SketchLine_69")
+SketchLine_66.result().setName("SketchLine_69")
+SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11)
+SketchConstraintDistance_31.setName("SketchConstraintDistance_32")
+SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11)
+SketchConstraintDistance_32.setName("SketchConstraintDistance_33")
+SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11)
+SketchConstraintDistance_33.setName("SketchConstraintDistance_34")
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_5"))
+SketchLine_67 = Sketch_8.addLine(55, -34.06366086055925, 55, 66.69873256076872)
+SketchLine_67.setName("SketchLine_79")
+SketchLine_67.result().setName("SketchLine_79")
+SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&ExtrusionCut_1_1/Modfied_6&Extrusion_8_1/Generated_Face_5"))
+SketchLine_68 = Sketch_8.addLine(55, -34.06366086055925, 55, 76.69872981077803)
+SketchLine_68.setName("SketchLine_70")
+SketchLine_68.result().setName("SketchLine_70")
+SketchLine_68.setAuxiliary(True)
+SketchConstraintCoincidence_114 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_11.result())
+SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_120")
+SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
+SketchConstraintCoincidence_115 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_12.result())
+SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_121")
+SketchLine_69 = Sketch_8.addLine(45.00002965668516, 76.69872981077802, -45.00000043269755, 76.69872981077803)
+SketchLine_69.setName("SketchLine_80")
+SketchLine_69.result().setName("SketchLine_80")
+SketchLine_70 = Sketch_8.addLine(55, 76.69872981077803, -55, 76.69872981077803)
+SketchLine_70.setName("SketchLine_71")
+SketchLine_70.result().setName("SketchLine_71")
+SketchLine_70.setAuxiliary(True)
+SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_122")
+SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
+SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_13.result())
+SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_123")
+SketchLine_71 = Sketch_8.addLine(-55, 66.69873008106598, -55, -34.06366086055925)
+SketchLine_71.setName("SketchLine_81")
+SketchLine_71.result().setName("SketchLine_81")
+SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366086055925)
+SketchLine_72.setAuxiliary(True)
+SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
+SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_124")
+SketchPoint_14 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_6&Extrusion_8_1/Generated_Face_5"))
+SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_14.result())
+SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_125")
+SketchLine_73 = Sketch_8.addLine(-55, -34.06366086055925, -63.63698496776804, -34.06366086055925)
+SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
+SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_126")
+SketchLine_74 = Sketch_8.addLine(-63.63698496776804, -34.06366086055925, -63.63698496776804, 83.16226073446268)
+SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
+SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_127")
+SketchLine_75 = Sketch_8.addLine(-63.63698496776804, 83.16226073446268, 64.71305347901398, 83.16226073446268)
+SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
+SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_128")
+SketchLine_76 = Sketch_8.addLine(64.71305347901398, 83.16226073446268, 64.71305347901398, -34.06366086055925)
+SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
+SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_129")
+SketchLine_77 = Sketch_8.addLine(64.71305347901398, -34.06366086055925, 55, -34.06366086055925)
+SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
+SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_130")
+SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
+SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_131")
+SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchPoint_11.coordinates(), SketchLine_77.endPoint())
+SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_132")
+SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_77.result())
+SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_73.result())
+SketchConstraintHorizontal_16 = Sketch_8.setHorizontal(SketchLine_75.result())
+SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_74.result())
+SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_76.result())
+SketchArc_15 = Sketch_8.addArc(45, 66.69872981077803, 55, 66.69873256076872, 45.00002965668516, 76.69872981077802, False)
+SketchArc_15.setName("SketchArc_16")
+SketchArc_15.result().setName("SketchArc_16")
+SketchArc_15.results()[1].setName("SketchArc_16_2")
+SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
+SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_133")
+SketchLine_78 = Sketch_8.addLine(45.00002965668516, 76.69872981077802, -55, 76.69872981077803)
+SketchLine_78.setAuxiliary(True)
+SketchConstraintCoincidence_128 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_134")
+SketchConstraintTangent_23 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_78.result())
+SketchConstraintTangent_24 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_67.result())
+SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_78.endPoint())
+SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_135")
+SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
+SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_136")
+SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_70.result())
+SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_137")
+SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
+SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_138")
+SketchArc_16 = Sketch_8.addArc(-45, 66.69872981077802, -45.00000043269755, 76.69872981077803, -55, 66.69873008106598, False)
+SketchArc_16.setName("SketchArc_17")
+SketchArc_16.result().setName("SketchArc_17")
+SketchArc_16.results()[1].setName("SketchArc_17_2")
+SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchArc_16.startPoint(), SketchLine_69.endPoint())
+SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_139")
+SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchArc_16.endPoint(), SketchLine_71.startPoint())
+SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_140")
+SketchConstraintTangent_25 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_69.result())
+SketchConstraintTangent_26 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_71.result())
+SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_69.startPoint())
+SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_141")
+SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_71.endPoint())
+SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_142")
+SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_69.endPoint(), SketchLine_78.result())
+SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143")
+SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_71.startPoint(), SketchLine_72.result())
+SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_144")
+SketchConstraintRadius_17 = Sketch_8.setRadius(SketchArc_15.results()[1], 10)
+SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
+SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
+SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
+SketchConstraintDistance_34 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25)
+SketchConstraintDistance_34.setName("SketchConstraintDistance_35")
+SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11)
+SketchConstraintDistance_35.setName("SketchConstraintDistance_36")
+SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077804, 5)
+SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
+SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11)
+SketchConstraintDistance_36.setName("SketchConstraintDistance_37")
+SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60)
+SketchConstraintDistance_37.setName("SketchConstraintDistance_38")
+SketchArc_17 = Sketch_8.addArc(44, 16.69872981077803, 49, 16.69872981077802, 39, 16.69872981077804, True)
+SketchArc_17.setName("SketchArc_19")
+SketchArc_17.result().setName("SketchArc_19")
+SketchArc_17.results()[1].setName("SketchArc_19_2")
+SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
+SketchConstraintRadius_21.setName("SketchConstraintRadius_22")
+SketchConstraintDistance_38 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60)
+SketchConstraintDistance_38.setName("SketchConstraintDistance_41")
+SketchArc_18 = Sketch_8.addArc(44, 51.69872981077804, 49, 51.69872981077802, 39, 51.69872981077802, False)
+SketchLine_79 = Sketch_8.addLine(49, 16.69872981077802, 49, 51.69872981077802)
+SketchLine_79.setName("SketchLine_82")
+SketchLine_79.result().setName("SketchLine_82")
+SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchArc_18.startPoint(), SketchLine_79.endPoint())
+SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_145")
+SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchLine_79.startPoint(), SketchArc_17.startPoint())
+SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_146")
+SketchLine_80 = Sketch_8.addLine(39, 16.69872981077804, 39, 51.69872981077802)
+SketchLine_80.setName("SketchLine_83")
+SketchLine_80.result().setName("SketchLine_83")
+SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchArc_17.endPoint(), SketchLine_80.startPoint())
+SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_147")
+SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
+SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_148")
+SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11)
+SketchConstraintDistance_40 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25)
+SketchConstraintDistance_41 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11)
+SketchConstraintDistance_41.setName("SketchConstraintDistance_42")
+SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
+SketchConstraintRadius_22.setName("SketchConstraintRadius_23")
+model.do()
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Boolean_7, 1)
+model.testNbSubResults(Boolean_7, [0])
+model.testNbSubShapes(Boolean_7, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Boolean_7, GeomAPI_Shape.FACE, [49])
+model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [271])
+model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [542])
+model.testResultsVolumes(Boolean_7, [157000.318686960934428498148918152])
+
+assert(model.checkPythonDump)
