Added test model

diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py
new file mode 100644 (file)
index 0000000..cbbae19
--- /dev/null
+++ b/test.models/bearing_puller.py
@@ -0,0 +1,1180 @@
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+model.addParameter(partSet, "Gap", "10")
+model.addParameter(partSet, "Rod", "12")
+model.addParameter(partSet, "Thickness", "25")
+Part_1 = model.addPart(partSet)
+Part_1.setName("Body")
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "Radius", "50", "Radius of the body")
+model.addParameter(Part_1_doc, "Width", "25", "Width of body arms")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(50, 14.61148285474187, 50, 0)
+SketchLine_2 = Sketch_1.addLine(50, 0, 6, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(7, 25, 16.13599978860571, 25)
+SketchLine_3.setName("SketchLine_4")
+SketchLine_3.result().setName("SketchLine_4")
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_2.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
+SketchConstraintVertical_1.setName("SketchConstraintVertical_2")
+SketchArc_1 = Sketch_1.addArc(16.1359986285606, -59.99999999999999, 16.13599978860571, 25, 46.80399475966571, 19.27467447616896, True)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_4")
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
+SketchArc_2 = Sketch_1.addArc(45, 14.61145639129118, 46.80399475966571, 19.27467447616896, 50, 14.61148285474187, True)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_6")
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_7")
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
+SketchPoint_1 = Sketch_1.addPoint(50, 17.96300027009704)
+SketchPoint_1.setAuxiliary(True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_1.result())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_8")
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.results()[1])
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_9")
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
+SketchPoint_2 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 85)
+SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
+SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_4.setName("SketchLine_27")
+SketchLine_4.result().setName("SketchLine_27")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_4.result(), SketchLine_2.startPoint(), "Radius")
+SketchConstraintDistance_1.setName("SketchConstraintDistance_13")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_2.result(), "Thickness")
+SketchConstraintDistance_2.setName("SketchConstraintDistance_14")
+SketchLine_5 = Sketch_1.addLine(6, 0, 6, 24)
+SketchLine_5.setName("SketchLine_28")
+SketchLine_5.result().setName("SketchLine_28")
+SketchLine_6 = Sketch_1.addLine(6, 24, 7, 25)
+SketchLine_6.setName("SketchLine_29")
+SketchLine_6.result().setName("SketchLine_29")
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_32")
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_2.setName("SketchConstraintVertical_3")
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_5.startPoint(), SketchLine_4.result(), "Rod/2")
+SketchConstraintDistance_3.setName("SketchConstraintDistance_15")
+SketchConstraintAngle_1 = Sketch_1.setAngleComplementary(SketchLine_6.result(), SketchLine_5.result(), 45.00000000000006)
+SketchConstraintAngle_1.setName("SketchConstraintAngle_3")
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_4.result(), SketchLine_6.endPoint(), "Rod/2 + 1")
+SketchConstraintDistance_4.setName("SketchConstraintDistance_16")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_34")
+SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_7.setName("SketchLine_30")
+SketchLine_7.result().setName("SketchLine_30")
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_35")
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_4r-SketchArc_1_2f-SketchArc_2_2f-SketchLine_28r-SketchLine_29r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+SketchLine_8 = Sketch_2.addLine(0, 0, 25, 43.30127018922193)
+SketchLine_8.setName("SketchLine_5")
+SketchLine_8.result().setName("SketchLine_5")
+SketchLine_8.setAuxiliary(True)
+SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchPoint_3.result())
+SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5"))
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1])
+SketchLine_9 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 15.87711932209923, -2.499977343709401)
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchLine_10 = Sketch_2.addLine(0, 0, 25, -43.30127018922193)
+SketchLine_10.setName("SketchLine_6")
+SketchLine_10.result().setName("SketchLine_6")
+SketchLine_10.setAuxiliary(True)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result())
+SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5"))
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1])
+SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192)
+SketchLine_12 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_12.setName("SketchLine_7")
+SketchLine_12.result().setName("SketchLine_7")
+SketchConstraintAngle_2 = Sketch_2.setAngleBackward(SketchLine_12.result(), SketchLine_10.result(), 59.99999999999994)
+SketchConstraintAngle_2.setName("SketchConstraintAngle_1")
+SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_12.result(), SketchLine_8.result(), 59.99999999999999)
+SketchConstraintAngle_3.setName("SketchConstraintAngle_2")
+SketchLine_13 = Sketch_2.addLine(14.43375672974065, -4.667176185980158e-016, 39.43375672974065, 43.30127018922192)
+SketchLine_13.setName("SketchLine_9")
+SketchLine_13.result().setName("SketchLine_9")
+SketchLine_13.setAuxiliary(True)
+SketchLine_14 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 14.43375672974065, -4.667176185980158e-016)
+SketchLine_14.setName("SketchLine_8")
+SketchLine_14.result().setName("SketchLine_8")
+SketchLine_14.setAuxiliary(True)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
+SketchConstraintParallel_1 = Sketch_2.setParallel(SketchLine_14.result(), SketchLine_10.result())
+SketchConstraintParallel_2 = Sketch_2.setParallel(SketchLine_13.result(), SketchLine_8.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_8.result(), SketchLine_14.result())
+SketchConstraintEqual_2 = Sketch_2.setEqual(SketchLine_10.result(), SketchLine_13.result())
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_13.startPoint(), SketchLine_10.result(), "Width/2")
+SketchConstraintDistance_5.setName("SketchConstraintDistance_4")
+SketchArc_3 = Sketch_2.addArc(20.20725942163691, 2.933703812344835e-015, 15.87713238415337, 2.499999967850816, 15.87711932209923, -2.499977343709401, False)
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_3.startPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_15")
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_9.endPoint())
+SketchConstraintTangent_4 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_9.result())
+SketchConstraintTangent_5 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_11.result())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_11.endPoint())
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_14.result())
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_13.result())
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_3.results()[1], 5)
+SketchConstraintRadius_3.setName("SketchConstraintRadius_2")
+SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_13.startPoint(), SketchLine_8.result(), "Width/2")
+SketchConstraintDistance_6.setName("SketchConstraintDistance_5")
+SketchArc_4 = Sketch_2.addArc(14.43375672974064, -1.454136002932938e-015, 39.43375672974064, -43.30127018922192, 39.43375672974065, 43.30127018922192, False)
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchArc_4.endPoint())
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchArc_4.endPoint())
+SketchConstraintEqual_3 = Sketch_2.setEqual(SketchArc_4.results()[1], SketchCircle_1.results()[1])
+SketchMultiRotation_1_objects = [SketchLine_11.result(), SketchArc_3.results()[1], SketchLine_9.result(), SketchArc_4.results()[1]]
+SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchCircle_2.center(), 120, 3)
+[SketchLine_15, SketchLine_16, SketchArc_5, SketchArc_6, SketchLine_17, SketchLine_18, SketchArc_7, SketchArc_8] = SketchMultiRotation_1.rotated()
+SketchArc_7.setName("SketchArc_6")
+SketchArc_7.result().setName("SketchArc_6")
+SketchArc_7.results()[1].setName("SketchArc_6_2")
+SketchLine_18.setName("SketchLine_15")
+SketchLine_18.result().setName("SketchLine_15")
+SketchLine_17.setName("SketchLine_13")
+SketchLine_17.result().setName("SketchLine_13")
+SketchArc_6.setName("SketchArc_7")
+SketchArc_6.result().setName("SketchArc_7")
+SketchArc_6.results()[1].setName("SketchArc_7_2")
+SketchLine_16.setName("SketchLine_14")
+SketchLine_16.result().setName("SketchLine_14")
+SketchLine_15.setName("SketchLine_12")
+SketchLine_15.result().setName("SketchLine_12")
+SketchLine_19 = Sketch_2.addLine(7.828185376255509, -23.55881480274223, 31.38482278389692, -64.36010764825475)
+SketchLine_19.setName("SketchLine_16")
+SketchLine_19.result().setName("SketchLine_16")
+SketchLine_20 = Sketch_2.addLine(31.38482278389692, -64.36010764825475, 40.0450768217413, -59.36010764825475)
+SketchLine_20.setName("SketchLine_17")
+SketchLine_20.result().setName("SketchLine_17")
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_28")
+SketchLine_21 = Sketch_2.addLine(40.0450768217413, -59.36010764825475, 16.48843941409989, -18.55881480274223)
+SketchLine_21.setName("SketchLine_18")
+SketchLine_21.result().setName("SketchLine_18")
+SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_29")
+SketchConstraintParallel_3 = Sketch_2.setParallel(SketchLine_10.result(), SketchLine_19.result())
+SketchConstraintParallel_4 = Sketch_2.setParallel(SketchLine_10.result(), SketchLine_21.result())
+SketchConstraintEqual_4 = Sketch_2.setEqual(SketchLine_9.result(), SketchLine_21.result())
+SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_9.result(), SketchLine_19.result())
+SketchConstraintDistance_7 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_19.result(), "Gap/2")
+SketchConstraintDistance_7.setName("SketchConstraintDistance_6")
+SketchConstraintDistance_8 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_21.result(), "Gap/2")
+SketchConstraintDistance_8.setName("SketchConstraintDistance_7")
+SketchArc_9 = Sketch_2.addArc(10.5, -18.18653347947321, 7.828185376255509, -23.55881480274223, 16.48843941409989, -18.55881480274223, True)
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchArc_9.center(), SketchLine_10.result())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchArc_9.startPoint())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
+SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_21.endPoint())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
+SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_9.results()[1], 6)
+SketchConstraintRadius_4.setName("SketchConstraintRadius_3")
+SketchMultiRotation_2_objects = [SketchLine_19.result(), SketchLine_20.result(), SketchLine_21.result(), SketchArc_9.results()[1]]
+SketchMultiRotation_2 = Sketch_2.addRotation(SketchMultiRotation_2_objects, SketchCircle_1.center(), 120, 3)
+[SketchLine_22, SketchLine_23, SketchLine_24, SketchLine_25, SketchLine_26, SketchLine_27, SketchArc_10, SketchArc_11] = SketchMultiRotation_2.rotated()
+SketchLine_27.setName("SketchLine_24")
+SketchLine_27.result().setName("SketchLine_24")
+SketchLine_26.setName("SketchLine_21")
+SketchLine_26.result().setName("SketchLine_21")
+SketchLine_25.setName("SketchLine_23")
+SketchLine_25.result().setName("SketchLine_23")
+SketchLine_24.setName("SketchLine_20")
+SketchLine_24.result().setName("SketchLine_20")
+SketchLine_23.setName("SketchLine_22")
+SketchLine_23.result().setName("SketchLine_22")
+SketchLine_22.setName("SketchLine_19")
+SketchLine_22.result().setName("SketchLine_19")
+SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPoint_3.coordinates(), 21)
+SketchConstraintDistance_9.setName("SketchConstraintDistance_8")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_2"), 10)
+Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
+Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Boolean_2_1/Modified_7"), model.selection("FACE", "Boolean_2_1/Modified_9"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchCircle_3 = Sketch_3.addCircle(25, -10, 4)
+SketchCircle_4 = Sketch_3.addCircle(40, -10, 4)
+SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_4.results()[1], 4)
+SketchConstraintEqual_6 = Sketch_3.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
+SketchLine_28 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_28.setName("SketchLine_25")
+SketchLine_28.result().setName("SketchLine_25")
+SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_28.result(), 25)
+SketchConstraintDistance_10.setName("SketchConstraintDistance_9")
+SketchConstraintDistance_11 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_28.result(), 40)
+SketchConstraintDistance_11.setName("SketchConstraintDistance_10")
+SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Boolean_2_1/Modified_23&Boolean_2_1/Modified_7"))
+SketchLine_29 = SketchProjection_1.createdFeature()
+SketchLine_29.setName("SketchLine_26")
+SketchLine_29.result().setName("SketchLine_26")
+SketchConstraintDistance_12 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_29.result(), 10)
+SketchConstraintDistance_12.setName("SketchConstraintDistance_11")
+SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_29.result(), 10)
+SketchConstraintDistance_13.setName("SketchConstraintDistance_12")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Boolean_1_1/Modified_6"), 5, model.selection("FACE", "Boolean_1_1/Modified_8"), 5)
+Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Recover_1 = model.addRecover(Part_1_doc, Boolean_3, [Extrusion_2.results()[1], Extrusion_2.result()])
+Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120)
+Boolean_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")])
+Recover_2 = model.addRecover(Part_1_doc, Boolean_4, [Rotation_1.results()[1], Rotation_1.result()])
+Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_2_1"), model.selection("SOLID", "Recover_2_2")], model.selection("EDGE", "PartSet/OZ"), 120)
+Boolean_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")])
+model.do()
+Part_2 = model.addPart(partSet)
+Part_2.setName("Arm 1")
+Part_2_doc = Part_2.document()
+model.addParameter(Part_2_doc, "a", "7.5")
+model.addParameter(Part_2_doc, "b", "12.5")
+model.addParameter(Part_2_doc, "c", "(a-b)/4")
+Sketch_4 = model.addSketch(Part_2_doc, model.defaultPlane("XOY"))
+SketchLine_30 = Sketch_4.addLine(-7.563632736215193e-032, -5.762896622594646, 0, 3.75)
+SketchLine_30.setAuxiliary(True)
+SketchLine_31 = Sketch_4.addLine(0, 3.75, 4.894344934278314, 2.394344934278312)
+SketchLine_31.setAuxiliary(True)
+SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchLine_32 = Sketch_4.addLine(4.894344934278314, 2.394344934278312, -7.563632736215193e-032, -5.762896622594646)
+SketchLine_32.setAuxiliary(True)
+SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
+SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_32.endPoint())
+SketchConstraintVertical_3 = Sketch_4.setVertical(SketchLine_30.result())
+SketchLine_33 = Sketch_4.addLine(0, 3.75, 6.25, 3.75)
+SketchLine_33.setAuxiliary(True)
+SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_33.startPoint())
+SketchLine_34 = Sketch_4.addLine(6.25, 3.75, 6.25, 0)
+SketchLine_34.setAuxiliary(True)
+SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
+SketchLine_35 = Sketch_4.addLine(6.25, 0, 0, 0)
+SketchLine_35.setAuxiliary(True)
+SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_30.result())
+SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_35.result())
+SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_33.result())
+SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_34.result())
+SketchLine_36 = Sketch_4.addLine(-7.563632736215193e-032, -5.762896622594646, 2.447172467139156, 3.072172467139157)
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_32.endPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_36.endPoint(), SketchLine_31.result())
+SketchConstraintPerpendicular_1 = Sketch_4.setPerpendicular(SketchLine_36.result(), SketchLine_31.result())
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchPoint_4.coordinates())
+SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_20")
+SketchConstraintLength_1 = Sketch_4.setLength(SketchLine_33.result(), "b/2")
+SketchConstraintLength_2 = Sketch_4.setLength(SketchLine_34.result(), "a/2")
+SketchCircle_5 = Sketch_4.addCircle(1.25, -1.25, 1.25)
+SketchCircle_5.setAuxiliary(True)
+SketchConstraintRadius_6 = Sketch_4.setRadius(SketchCircle_5.results()[1], "(b-a)/4")
+SketchConstraintTangent_6 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_35.result())
+SketchConstraintTangent_7 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_30.result())
+SketchConstraintTangent_8 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_32.result())
+SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchCircle_5.center(), SketchLine_36.result())
+SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_21")
+SketchLine_37 = Sketch_4.addLine(4.894344934278314, 2.394344934278312, 6.25, 0)
+SketchLine_37.setAuxiliary(True)
+SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_37.endPoint())
+SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_35.startPoint(), SketchLine_37.endPoint())
+SketchLine_38 = Sketch_4.addLine(0, 3.75, 6.25, 0)
+SketchLine_38.setName("SketchLine_10")
+SketchLine_38.result().setName("SketchLine_10")
+SketchLine_38.setAuxiliary(True)
+SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_38.startPoint())
+SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_38.startPoint())
+SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_33.startPoint(), SketchLine_38.startPoint())
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_38.endPoint())
+SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_26")
+SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_35.startPoint(), SketchLine_38.endPoint())
+SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_37.endPoint(), SketchLine_38.endPoint())
+SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_28")
+SketchConstraintPerpendicular_2 = Sketch_4.setPerpendicular(SketchLine_32.result(), SketchLine_38.result())
+SketchConstraintPerpendicular_2.setName("SketchConstraintPerpendicular_3")
+SketchLine_39 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_39.setName("SketchLine_11")
+SketchLine_39.result().setName("SketchLine_11")
+SketchLine_40 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_40.setName("SketchLine_12")
+SketchLine_40.result().setName("SketchLine_12")
+SketchArc_12 = Sketch_4.addArc(-7.563632736215193e-032, -5.762896622594646, 0, 3.75, 4.894344934278314, 2.394344934278312, True)
+SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_30")
+SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_31")
+SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchLine_33.startPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_32")
+SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_38.startPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_31.endPoint())
+SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_34")
+SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchArc_12.center(), SketchLine_32.endPoint())
+SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_35")
+SketchArc_13 = Sketch_4.addArc(3.457737973711348, 3.788069295318559e-014, 6.25, 0, 4.894344934278314, 2.394344934278312, False)
+SketchArc_13.setName("SketchArc_4")
+SketchArc_13.result().setName("SketchArc_4")
+SketchArc_13.results()[1].setName("SketchArc_4_2")
+SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_13.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_13.endPoint(), SketchArc_12.endPoint())
+SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_49")
+SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_13.center(), SketchLine_32.result())
+SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_50")
+SketchConstraintMirror_1 = Sketch_4.addMirror(SketchLine_39.result(), [SketchArc_13.results()[1]])
+[SketchArc_14] = SketchConstraintMirror_1.mirrored()
+SketchArc_14.setName("SketchArc_5")
+SketchArc_14.result().setName("SketchArc_5")
+SketchArc_14.results()[1].setName("SketchArc_5_2")
+SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_40.result(), [SketchArc_12.results()[1]])
+[SketchArc_15] = SketchConstraintMirror_2.mirrored()
+SketchArc_15.setName("SketchArc_6")
+SketchArc_15.result().setName("SketchArc_6")
+SketchArc_15.results()[1].setName("SketchArc_6_2")
+SketchArc_16 = Sketch_4.addArc(0, -5.762896622852197, 0, 3.75, -4.894344934278309, 2.394344934278312, False)
+SketchArc_16.setName("SketchArc_7")
+SketchArc_16.result().setName("SketchArc_7")
+SketchArc_16.results()[1].setName("SketchArc_7_2")
+SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchArc_16.startPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchArc_16.endPoint(), SketchAPI_Arc(SketchArc_14).startPoint())
+SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchArc_16.center(), SketchLine_30.result())
+SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_53")
+SketchArc_17 = Sketch_4.addArc(-3.457737973711317, -7.36102368218484e-015, -6.25, -1.033423289663963e-025, -4.894355280416407, -2.394338726595456, False)
+SketchArc_17.setName("SketchArc_8")
+SketchArc_17.result().setName("SketchArc_8")
+SketchArc_17.results()[1].setName("SketchArc_8_2")
+SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchArc_17.startPoint(), SketchAPI_Arc(SketchArc_14).endPoint())
+SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_54")
+SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_17.center(), SketchAPI_Arc(SketchArc_14).center())
+SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_55")
+SketchArc_18 = Sketch_4.addArc(-4.74373017345514e-021, 5.762896622852203, 3.086813683229417e-021, -3.75, -4.894355280416407, -2.394338726595456, True)
+SketchArc_18.setName("SketchArc_9")
+SketchArc_18.result().setName("SketchArc_9")
+SketchArc_18.results()[1].setName("SketchArc_9_2")
+SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_18.startPoint(), SketchAPI_Arc(SketchArc_15).endPoint())
+SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_56")
+SketchConstraintCoincidence_69 = Sketch_4.setCoincident(SketchArc_18.center(), SketchAPI_Arc(SketchArc_15).center())
+SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_57")
+SketchConstraintCoincidence_70 = Sketch_4.setCoincident(SketchArc_18.endPoint(), SketchArc_17.endPoint())
+SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_58")
+SketchArc_19 = Sketch_4.addArc(2.702425115181704, 0.4276508736110897, 6.25, 0, 4.894344934278309, -2.394344934278312, True)
+SketchArc_19.setName("SketchArc_10")
+SketchArc_19.result().setName("SketchArc_10")
+SketchArc_19.results()[1].setName("SketchArc_10_2")
+SketchConstraintCoincidence_71 = Sketch_4.setCoincident(SketchArc_19.startPoint(), SketchArc_13.startPoint())
+SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_59")
+SketchConstraintCoincidence_72 = Sketch_4.setCoincident(SketchArc_19.endPoint(), SketchAPI_Arc(SketchArc_15).startPoint())
+SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_60")
+model.do()
+Sketch_5 = model.addSketch(Part_2_doc, model.defaultPlane("XOZ"))
+SketchArc_20 = Sketch_5.addArc(75, 0, 21.9522369740045, 53.01825004597796, 20.93617039352901, -51.98174995402206, False)
+SketchArc_20.setName("SketchArc_3")
+SketchArc_20.result().setName("SketchArc_3")
+SketchArc_20.results()[1].setName("SketchArc_3_2")
+SketchArc_20.setAuxiliary(True)
+SketchConstraintRadius_7 = Sketch_5.setRadius(SketchArc_20.results()[1], 75)
+SketchLine_41 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_41.setName("SketchLine_13")
+SketchLine_41.result().setName("SketchLine_13")
+SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchArc_20.center(), SketchLine_41.result())
+SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_38")
+SketchConstraintCoincidence_74 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchArc_20.results()[1])
+SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_39")
+SketchLine_42 = Sketch_5.addLine(16.9522369740045, -56.98174995402205, 16.9522369740045, -46.98174995402206)
+SketchLine_42.setName("SketchLine_14")
+SketchLine_42.result().setName("SketchLine_14")
+SketchLine_43 = Sketch_5.addLine(16.9522369740045, -46.98174995402206, 36.95223697400451, -46.98174995402206)
+SketchLine_43.setName("SketchLine_15")
+SketchLine_43.result().setName("SketchLine_15")
+SketchConstraintCoincidence_75 = Sketch_5.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_40")
+SketchLine_44 = Sketch_5.addLine(36.95223697400451, -46.98174995402206, 31.17873428210827, -56.98174995402205)
+SketchLine_44.setName("SketchLine_16")
+SketchLine_44.result().setName("SketchLine_16")
+SketchConstraintCoincidence_76 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_41")
+SketchLine_45 = Sketch_5.addLine(31.17873428210827, -56.98174995402205, 16.9522369740045, -56.98174995402205)
+SketchLine_45.setName("SketchLine_17")
+SketchLine_45.result().setName("SketchLine_17")
+SketchConstraintCoincidence_77 = Sketch_5.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
+SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_42")
+SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_42.startPoint(), SketchLine_45.endPoint())
+SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_43")
+SketchConstraintHorizontal_5 = Sketch_5.setHorizontal(SketchLine_43.result())
+SketchConstraintHorizontal_6 = Sketch_5.setHorizontal(SketchLine_45.result())
+SketchConstraintVertical_5 = Sketch_5.setVertical(SketchLine_42.result())
+SketchConstraintAngle_4 = Sketch_5.setAngleComplementary(SketchLine_44.result(), SketchLine_45.result(), 60.00000000000006)
+SketchConstraintDistance_14 = Sketch_5.setDistance(SketchLine_43.endPoint(), SketchLine_42.result(), 20)
+SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_42.startPoint(), SketchLine_43.result(), 10)
+SketchLine_46 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 21.9522369740045, 0)
+SketchLine_46.setName("SketchLine_18")
+SketchLine_46.result().setName("SketchLine_18")
+SketchLine_46.setAuxiliary(True)
+SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_46.startPoint())
+SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_44")
+SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchLine_46.endPoint(), SketchLine_41.result())
+SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_45")
+SketchConstraintVertical_6 = Sketch_5.setVertical(SketchLine_46.result())
+SketchConstraintDistance_16 = Sketch_5.setDistance(SketchLine_42.endPoint(), SketchLine_46.result(), 5)
+SketchConstraintDistance_17 = Sketch_5.setDistance(SketchArc_20.startPoint(), SketchLine_43.result(), 100)
+SketchCircle_6 = Sketch_5.addCircle(21.9522369740045, 53.01825004597796, 8)
+SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchCircle_6.center())
+SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_82 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchCircle_6.center())
+SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_47")
+SketchConstraintRadius_8 = Sketch_5.setRadius(SketchCircle_6.results()[1], 8)
+SketchCircle_7 = Sketch_5.addCircle(21.9522369740045, 53.01825004597796, 4)
+SketchConstraintCoincidence_83 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchCircle_7.center())
+SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_84 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchCircle_7.center())
+SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_62")
+SketchConstraintCoincidence_85 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchCircle_7.center())
+SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_63")
+SketchConstraintRadius_9 = Sketch_5.setRadius(SketchCircle_7.results()[1], 4)
+SketchLine_47 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 39.68353296044558, 53.01825004597796)
+SketchLine_47.setName("SketchLine_19")
+SketchLine_47.result().setName("SketchLine_19")
+SketchLine_47.setAuxiliary(True)
+SketchConstraintCoincidence_86 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_64")
+SketchConstraintCoincidence_87 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_65")
+SketchConstraintCoincidence_88 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_89 = Sketch_5.setCoincident(SketchCircle_7.center(), SketchLine_47.startPoint())
+SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_67")
+SketchConstraintHorizontal_7 = Sketch_5.setHorizontal(SketchLine_47.result())
+SketchConstraintDistance_18 = Sketch_5.setDistance(SketchArc_20.endPoint(), SketchLine_47.result(), 105)
+SketchLine_48 = Sketch_5.addLine(75, 0, 20.93617039352901, -51.98174995402206)
+SketchLine_48.setName("SketchLine_20")
+SketchLine_48.result().setName("SketchLine_20")
+SketchLine_48.setAuxiliary(True)
+SketchConstraintCoincidence_90 = Sketch_5.setCoincident(SketchArc_20.center(), SketchLine_48.startPoint())
+SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_68")
+SketchConstraintCoincidence_91 = Sketch_5.setCoincident(SketchArc_20.endPoint(), SketchLine_48.endPoint())
+SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_69")
+SketchLine_49 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 0, 10)
+SketchLine_49.setName("SketchLine_21")
+SketchLine_49.result().setName("SketchLine_21")
+SketchLine_49.setAuxiliary(True)
+SketchConstraintCoincidence_92 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_70")
+SketchConstraintCoincidence_93 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_71")
+SketchConstraintCoincidence_94 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_72")
+SketchConstraintCoincidence_95 = Sketch_5.setCoincident(SketchCircle_7.center(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_96 = Sketch_5.setCoincident(SketchLine_47.startPoint(), SketchLine_49.startPoint())
+SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_74")
+SketchLine_50 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_50.setName("SketchLine_22")
+SketchLine_50.result().setName("SketchLine_22")
+SketchConstraintCoincidence_97 = Sketch_5.setCoincident(SketchLine_49.endPoint(), SketchLine_50.result())
+SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_75")
+SketchConstraintDistance_19 = Sketch_5.setDistance(SketchLine_49.endPoint(), SketchLine_41.result(), 10)
+model.do()
+Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")])
+Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s"))
+Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
+Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2"))
+Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2")
+Boolean_6 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
+Boolean_7 = model.addCut(Part_2_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
+model.do()
+Part_3 = model.addPart(partSet)
+Part_3.setName("Arm 2")
+Part_3_doc = Part_3.document()
+model.addParameter(Part_3_doc, "a", "7.5")
+model.addParameter(Part_3_doc, "b", "12.5")
+model.addParameter(Part_3_doc, "c", "(a-b)/4")
+Sketch_6 = model.addSketch(Part_3_doc, model.defaultPlane("XOY"))
+SketchLine_51 = Sketch_6.addLine(-7.563632736215193e-032, -5.762896622594646, 0, 3.75)
+SketchLine_51.setAuxiliary(True)
+SketchLine_52 = Sketch_6.addLine(0, 3.75, 4.894344934278314, 2.394344934278312)
+SketchLine_52.setAuxiliary(True)
+SketchConstraintCoincidence_98 = Sketch_6.setCoincident(SketchLine_51.endPoint(), SketchLine_52.startPoint())
+SketchLine_53 = Sketch_6.addLine(4.894344934278314, 2.394344934278312, -7.563632736215193e-032, -5.762896622594646)
+SketchLine_53.setAuxiliary(True)
+SketchConstraintCoincidence_99 = Sketch_6.setCoincident(SketchLine_52.endPoint(), SketchLine_53.startPoint())
+SketchConstraintCoincidence_100 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_53.endPoint())
+SketchConstraintVertical_7 = Sketch_6.setVertical(SketchLine_51.result())
+SketchLine_54 = Sketch_6.addLine(0, 3.75, 6.25, 3.75)
+SketchLine_54.setAuxiliary(True)
+SketchConstraintCoincidence_101 = Sketch_6.setCoincident(SketchLine_51.endPoint(), SketchLine_54.startPoint())
+SketchConstraintCoincidence_102 = Sketch_6.setCoincident(SketchLine_52.startPoint(), SketchLine_54.startPoint())
+SketchLine_55 = Sketch_6.addLine(6.25, 3.75, 6.25, 0)
+SketchLine_55.setAuxiliary(True)
+SketchConstraintCoincidence_103 = Sketch_6.setCoincident(SketchLine_54.endPoint(), SketchLine_55.startPoint())
+SketchLine_56 = Sketch_6.addLine(6.25, 0, 0, 0)
+SketchLine_56.setAuxiliary(True)
+SketchConstraintCoincidence_104 = Sketch_6.setCoincident(SketchLine_55.endPoint(), SketchLine_56.startPoint())
+SketchConstraintCoincidence_105 = Sketch_6.setCoincident(SketchLine_56.endPoint(), SketchLine_51.result())
+SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_56.result())
+SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_54.result())
+SketchConstraintVertical_8 = Sketch_6.setVertical(SketchLine_55.result())
+SketchLine_57 = Sketch_6.addLine(-7.563632736215193e-032, -5.762896622594646, 2.447172467139156, 3.072172467139157)
+SketchLine_57.setAuxiliary(True)
+SketchConstraintCoincidence_106 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_57.startPoint())
+SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchLine_53.endPoint(), SketchLine_57.startPoint())
+SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_57.endPoint(), SketchLine_52.result())
+SketchConstraintPerpendicular_3 = Sketch_6.setPerpendicular(SketchLine_57.result(), SketchLine_52.result())
+SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_109 = Sketch_6.setCoincident(SketchLine_56.endPoint(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_20")
+SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_54.result(), "b/2")
+SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_55.result(), "a/2")
+SketchCircle_8 = Sketch_6.addCircle(1.25, -1.25, 1.25)
+SketchCircle_8.setAuxiliary(True)
+SketchConstraintRadius_10 = Sketch_6.setRadius(SketchCircle_8.results()[1], "(b-a)/4")
+SketchConstraintTangent_9 = Sketch_6.setTangent(SketchCircle_8.results()[1], SketchLine_56.result())
+SketchConstraintTangent_10 = Sketch_6.setTangent(SketchCircle_8.results()[1], SketchLine_51.result())
+SketchConstraintTangent_11 = Sketch_6.setTangent(SketchCircle_8.results()[1], SketchLine_53.result())
+SketchConstraintCoincidence_110 = Sketch_6.setCoincident(SketchCircle_8.center(), SketchLine_57.result())
+SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_21")
+SketchLine_58 = Sketch_6.addLine(4.894344934278314, 2.394344934278312, 6.25, 0)
+SketchLine_58.setAuxiliary(True)
+SketchConstraintCoincidence_111 = Sketch_6.setCoincident(SketchLine_52.endPoint(), SketchLine_58.startPoint())
+SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchLine_53.startPoint(), SketchLine_58.startPoint())
+SketchConstraintCoincidence_113 = Sketch_6.setCoincident(SketchLine_55.endPoint(), SketchLine_58.endPoint())
+SketchConstraintCoincidence_114 = Sketch_6.setCoincident(SketchLine_56.startPoint(), SketchLine_58.endPoint())
+SketchLine_59 = Sketch_6.addLine(0, 3.75, 6.25, 0)
+SketchLine_59.setName("SketchLine_10")
+SketchLine_59.result().setName("SketchLine_10")
+SketchLine_59.setAuxiliary(True)
+SketchConstraintCoincidence_115 = Sketch_6.setCoincident(SketchLine_51.endPoint(), SketchLine_59.startPoint())
+SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_116 = Sketch_6.setCoincident(SketchLine_52.startPoint(), SketchLine_59.startPoint())
+SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_117 = Sketch_6.setCoincident(SketchLine_54.startPoint(), SketchLine_59.startPoint())
+SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_118 = Sketch_6.setCoincident(SketchLine_55.endPoint(), SketchLine_59.endPoint())
+SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_26")
+SketchConstraintCoincidence_119 = Sketch_6.setCoincident(SketchLine_56.startPoint(), SketchLine_59.endPoint())
+SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_120 = Sketch_6.setCoincident(SketchLine_58.endPoint(), SketchLine_59.endPoint())
+SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_28")
+SketchConstraintPerpendicular_4 = Sketch_6.setPerpendicular(SketchLine_53.result(), SketchLine_59.result())
+SketchConstraintPerpendicular_4.setName("SketchConstraintPerpendicular_3")
+SketchLine_60 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_60.setName("SketchLine_11")
+SketchLine_60.result().setName("SketchLine_11")
+SketchLine_61 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_61.setName("SketchLine_12")
+SketchLine_61.result().setName("SketchLine_12")
+SketchArc_21 = Sketch_6.addArc(-7.563632736215193e-032, -5.762896622594646, 0, 3.75, 4.894344934278314, 2.394344934278312, True)
+SketchConstraintCoincidence_121 = Sketch_6.setCoincident(SketchLine_51.endPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_30")
+SketchConstraintCoincidence_122 = Sketch_6.setCoincident(SketchLine_52.startPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_31")
+SketchConstraintCoincidence_123 = Sketch_6.setCoincident(SketchLine_54.startPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_32")
+SketchConstraintCoincidence_124 = Sketch_6.setCoincident(SketchLine_59.startPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_125 = Sketch_6.setCoincident(SketchArc_21.endPoint(), SketchLine_52.endPoint())
+SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_34")
+SketchConstraintCoincidence_126 = Sketch_6.setCoincident(SketchArc_21.center(), SketchLine_53.endPoint())
+SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_35")
+SketchArc_22 = Sketch_6.addArc(3.457737973711348, 3.788069295318559e-014, 6.25, 0, 4.894344934278314, 2.394344934278312, False)
+SketchArc_22.setName("SketchArc_4")
+SketchArc_22.result().setName("SketchArc_4")
+SketchArc_22.results()[1].setName("SketchArc_4_2")
+SketchConstraintCoincidence_127 = Sketch_6.setCoincident(SketchArc_22.startPoint(), SketchLine_56.startPoint())
+SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_128 = Sketch_6.setCoincident(SketchArc_22.endPoint(), SketchArc_21.endPoint())
+SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_49")
+SketchConstraintCoincidence_129 = Sketch_6.setCoincident(SketchArc_22.center(), SketchLine_53.result())
+SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_50")
+SketchConstraintMirror_3 = Sketch_6.addMirror(SketchLine_60.result(), [SketchArc_22.results()[1]])
+[SketchArc_23] = SketchConstraintMirror_3.mirrored()
+SketchArc_23.setName("SketchArc_5")
+SketchArc_23.result().setName("SketchArc_5")
+SketchArc_23.results()[1].setName("SketchArc_5_2")
+SketchConstraintMirror_4 = Sketch_6.addMirror(SketchLine_61.result(), [SketchArc_21.results()[1]])
+[SketchArc_24] = SketchConstraintMirror_4.mirrored()
+SketchArc_24.setName("SketchArc_6")
+SketchArc_24.result().setName("SketchArc_6")
+SketchArc_24.results()[1].setName("SketchArc_6_2")
+SketchArc_25 = Sketch_6.addArc(0, -5.762896622852197, 0, 3.75, -4.894344934278309, 2.394344934278312, False)
+SketchArc_25.setName("SketchArc_7")
+SketchArc_25.result().setName("SketchArc_7")
+SketchArc_25.results()[1].setName("SketchArc_7_2")
+SketchConstraintCoincidence_130 = Sketch_6.setCoincident(SketchArc_25.startPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_131 = Sketch_6.setCoincident(SketchArc_25.endPoint(), SketchAPI_Arc(SketchArc_23).startPoint())
+SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_132 = Sketch_6.setCoincident(SketchArc_25.center(), SketchLine_51.result())
+SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_53")
+SketchArc_26 = Sketch_6.addArc(-3.457737973711317, -7.36102368218484e-015, -6.25, -1.033423289663963e-025, -4.894346087140616, -2.39434424257408, False)
+SketchArc_26.setName("SketchArc_8")
+SketchArc_26.result().setName("SketchArc_8")
+SketchArc_26.results()[1].setName("SketchArc_8_2")
+SketchConstraintCoincidence_133 = Sketch_6.setCoincident(SketchArc_26.startPoint(), SketchAPI_Arc(SketchArc_23).endPoint())
+SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_54")
+SketchConstraintCoincidence_134 = Sketch_6.setCoincident(SketchArc_26.center(), SketchAPI_Arc(SketchArc_23).center())
+SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_55")
+SketchArc_27 = Sketch_6.addArc(-4.74373017345514e-021, 5.762896622852203, 3.086813683229417e-021, -3.75, -4.894346087140616, -2.39434424257408, True)
+SketchArc_27.setName("SketchArc_9")
+SketchArc_27.result().setName("SketchArc_9")
+SketchArc_27.results()[1].setName("SketchArc_9_2")
+SketchConstraintCoincidence_135 = Sketch_6.setCoincident(SketchArc_27.startPoint(), SketchAPI_Arc(SketchArc_24).endPoint())
+SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_56")
+SketchConstraintCoincidence_136 = Sketch_6.setCoincident(SketchArc_27.center(), SketchAPI_Arc(SketchArc_24).center())
+SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_57")
+SketchConstraintCoincidence_137 = Sketch_6.setCoincident(SketchArc_27.endPoint(), SketchArc_26.endPoint())
+SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_58")
+SketchArc_28 = Sketch_6.addArc(2.702093420313011, 0.4278386760279786, 6.25, 0, 4.894344934278309, -2.394344934278312, True)
+SketchArc_28.setName("SketchArc_10")
+SketchArc_28.result().setName("SketchArc_10")
+SketchArc_28.results()[1].setName("SketchArc_10_2")
+SketchConstraintCoincidence_138 = Sketch_6.setCoincident(SketchArc_28.startPoint(), SketchArc_22.startPoint())
+SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_59")
+SketchConstraintCoincidence_139 = Sketch_6.setCoincident(SketchArc_28.endPoint(), SketchAPI_Arc(SketchArc_24).startPoint())
+SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_60")
+model.do()
+Sketch_7 = model.addSketch(Part_3_doc, model.defaultPlane("XOZ"))
+SketchArc_29 = Sketch_7.addArc(75, 0, 21.9522369740045, 53.01825004597796, 20.93617039352901, -51.98174995402206, False)
+SketchArc_29.setName("SketchArc_3")
+SketchArc_29.result().setName("SketchArc_3")
+SketchArc_29.results()[1].setName("SketchArc_3_2")
+SketchArc_29.setAuxiliary(True)
+SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_29.results()[1], 75)
+SketchLine_62 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_62.setName("SketchLine_13")
+SketchLine_62.result().setName("SketchLine_13")
+SketchConstraintCoincidence_140 = Sketch_7.setCoincident(SketchArc_29.center(), SketchLine_62.result())
+SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_38")
+SketchConstraintCoincidence_141 = Sketch_7.setCoincident(SketchLine_62.startPoint(), SketchArc_29.results()[1])
+SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_39")
+SketchLine_63 = Sketch_7.addLine(16.9522369740045, -56.98174995402205, 16.9522369740045, -46.98174995402206)
+SketchLine_63.setName("SketchLine_14")
+SketchLine_63.result().setName("SketchLine_14")
+SketchLine_64 = Sketch_7.addLine(16.9522369740045, -46.98174995402206, 36.95223697400451, -46.98174995402206)
+SketchLine_64.setName("SketchLine_15")
+SketchLine_64.result().setName("SketchLine_15")
+SketchConstraintCoincidence_142 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
+SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_40")
+SketchLine_65 = Sketch_7.addLine(36.95223697400451, -46.98174995402206, 31.17873428210827, -56.98174995402205)
+SketchLine_65.setName("SketchLine_16")
+SketchLine_65.result().setName("SketchLine_16")
+SketchConstraintCoincidence_143 = Sketch_7.setCoincident(SketchLine_64.endPoint(), SketchLine_65.startPoint())
+SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_41")
+SketchLine_66 = Sketch_7.addLine(31.17873428210827, -56.98174995402205, 16.9522369740045, -56.98174995402205)
+SketchLine_66.setName("SketchLine_17")
+SketchLine_66.result().setName("SketchLine_17")
+SketchConstraintCoincidence_144 = Sketch_7.setCoincident(SketchLine_65.endPoint(), SketchLine_66.startPoint())
+SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_42")
+SketchConstraintCoincidence_145 = Sketch_7.setCoincident(SketchLine_63.startPoint(), SketchLine_66.endPoint())
+SketchConstraintCoincidence_145.setName("SketchConstraintCoincidence_43")
+SketchConstraintHorizontal_10 = Sketch_7.setHorizontal(SketchLine_64.result())
+SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_66.result())
+SketchConstraintVertical_9 = Sketch_7.setVertical(SketchLine_63.result())
+SketchConstraintAngle_5 = Sketch_7.setAngleComplementary(SketchLine_65.result(), SketchLine_66.result(), 60.00000000000006)
+SketchConstraintDistance_20 = Sketch_7.setDistance(SketchLine_64.endPoint(), SketchLine_63.result(), 20)
+SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_63.startPoint(), SketchLine_64.result(), 10)
+SketchLine_67 = Sketch_7.addLine(21.9522369740045, 53.01825004597796, 21.9522369740045, 0)
+SketchLine_67.setName("SketchLine_18")
+SketchLine_67.result().setName("SketchLine_18")
+SketchLine_67.setAuxiliary(True)
+SketchConstraintCoincidence_146 = Sketch_7.setCoincident(SketchArc_29.startPoint(), SketchLine_67.startPoint())
+SketchConstraintCoincidence_146.setName("SketchConstraintCoincidence_44")
+SketchConstraintCoincidence_147 = Sketch_7.setCoincident(SketchLine_67.endPoint(), SketchLine_62.result())
+SketchConstraintCoincidence_147.setName("SketchConstraintCoincidence_45")
+SketchConstraintVertical_10 = Sketch_7.setVertical(SketchLine_67.result())
+SketchConstraintDistance_22 = Sketch_7.setDistance(SketchLine_63.endPoint(), SketchLine_67.result(), 5)
+SketchConstraintDistance_23 = Sketch_7.setDistance(SketchArc_29.startPoint(), SketchLine_64.result(), 100)
+SketchCircle_9 = Sketch_7.addCircle(21.9522369740045, 53.01825004597796, 8)
+SketchConstraintCoincidence_148 = Sketch_7.setCoincident(SketchArc_29.startPoint(), SketchCircle_9.center())
+SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_149 = Sketch_7.setCoincident(SketchLine_67.startPoint(), SketchCircle_9.center())
+SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_47")
+SketchConstraintRadius_12 = Sketch_7.setRadius(SketchCircle_9.results()[1], 8)
+SketchCircle_10 = Sketch_7.addCircle(21.9522369740045, 53.01825004597796, 4)
+SketchConstraintCoincidence_150 = Sketch_7.setCoincident(SketchArc_29.startPoint(), SketchCircle_10.center())
+SketchConstraintCoincidence_150.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_151 = Sketch_7.setCoincident(SketchLine_67.startPoint(), SketchCircle_10.center())
+SketchConstraintCoincidence_151.setName("SketchConstraintCoincidence_62")
+SketchConstraintCoincidence_152 = Sketch_7.setCoincident(SketchCircle_9.center(), SketchCircle_10.center())
+SketchConstraintCoincidence_152.setName("SketchConstraintCoincidence_63")
+SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_10.results()[1], 4)
+SketchLine_68 = Sketch_7.addLine(21.9522369740045, 53.01825004597796, 39.68353296044558, 53.01825004597796)
+SketchLine_68.setName("SketchLine_19")
+SketchLine_68.result().setName("SketchLine_19")
+SketchLine_68.setAuxiliary(True)
+SketchConstraintCoincidence_153 = Sketch_7.setCoincident(SketchArc_29.startPoint(), SketchLine_68.startPoint())
+SketchConstraintCoincidence_153.setName("SketchConstraintCoincidence_64")
+SketchConstraintCoincidence_154 = Sketch_7.setCoincident(SketchLine_67.startPoint(), SketchLine_68.startPoint())
+SketchConstraintCoincidence_154.setName("SketchConstraintCoincidence_65")
+SketchConstraintCoincidence_155 = Sketch_7.setCoincident(SketchCircle_9.center(), SketchLine_68.startPoint())
+SketchConstraintCoincidence_155.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_156 = Sketch_7.setCoincident(SketchCircle_10.center(), SketchLine_68.startPoint())
+SketchConstraintCoincidence_156.setName("SketchConstraintCoincidence_67")
+SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_68.result())
+SketchConstraintDistance_24 = Sketch_7.setDistance(SketchArc_29.endPoint(), SketchLine_68.result(), 105)
+SketchLine_69 = Sketch_7.addLine(75, 0, 20.93617039352901, -51.98174995402206)
+SketchLine_69.setName("SketchLine_20")
+SketchLine_69.result().setName("SketchLine_20")
+SketchLine_69.setAuxiliary(True)
+SketchConstraintCoincidence_157 = Sketch_7.setCoincident(SketchArc_29.center(), SketchLine_69.startPoint())
+SketchConstraintCoincidence_157.setName("SketchConstraintCoincidence_68")
+SketchConstraintCoincidence_158 = Sketch_7.setCoincident(SketchArc_29.endPoint(), SketchLine_69.endPoint())
+SketchConstraintCoincidence_158.setName("SketchConstraintCoincidence_69")
+SketchLine_70 = Sketch_7.addLine(21.9522369740045, 53.01825004597796, 0, 10)
+SketchLine_70.setName("SketchLine_21")
+SketchLine_70.result().setName("SketchLine_21")
+SketchLine_70.setAuxiliary(True)
+SketchConstraintCoincidence_159 = Sketch_7.setCoincident(SketchArc_29.startPoint(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_159.setName("SketchConstraintCoincidence_70")
+SketchConstraintCoincidence_160 = Sketch_7.setCoincident(SketchLine_67.startPoint(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_160.setName("SketchConstraintCoincidence_71")
+SketchConstraintCoincidence_161 = Sketch_7.setCoincident(SketchCircle_9.center(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_161.setName("SketchConstraintCoincidence_72")
+SketchConstraintCoincidence_162 = Sketch_7.setCoincident(SketchCircle_10.center(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_162.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_163 = Sketch_7.setCoincident(SketchLine_68.startPoint(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_163.setName("SketchConstraintCoincidence_74")
+SketchLine_71 = Sketch_7.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_71.setName("SketchLine_22")
+SketchLine_71.result().setName("SketchLine_22")
+SketchConstraintCoincidence_164 = Sketch_7.setCoincident(SketchLine_70.endPoint(), SketchLine_71.result())
+SketchConstraintCoincidence_164.setName("SketchConstraintCoincidence_75")
+SketchConstraintDistance_25 = Sketch_7.setDistance(SketchLine_70.endPoint(), SketchLine_62.result(), 10)
+model.do()
+Face_2 = model.addFace(Part_3_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")])
+Axis_5 = model.addAxis(Part_3_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s"))
+Rotation_4 = model.addRotation(Part_3_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
+Pipe_2 = model.addPipe(Part_3_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2"))
+Extrusion_5 = model.addExtrusion(Part_3_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2")
+Boolean_8 = model.addFuse(Part_3_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Extrusion_6 = model.addExtrusion(Part_3_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
+Boolean_9 = model.addCut(Part_3_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Translation_2 = model.addTranslation(Part_3_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
+model.do()
+Part_4 = model.addPart(partSet)
+Part_4.setName("Arm 3")
+Part_4_doc = Part_4.document()
+model.addParameter(Part_4_doc, "a", "7.5")
+model.addParameter(Part_4_doc, "b", "12.5")
+model.addParameter(Part_4_doc, "c", "(a-b)/4")
+Sketch_8 = model.addSketch(Part_4_doc, model.defaultPlane("XOY"))
+SketchLine_72 = Sketch_8.addLine(-7.563632736215193e-032, -5.762896622594646, 0, 3.75)
+SketchLine_72.setAuxiliary(True)
+SketchLine_73 = Sketch_8.addLine(0, 3.75, 4.894344934278314, 2.394344934278312)
+SketchLine_73.setAuxiliary(True)
+SketchConstraintCoincidence_165 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
+SketchLine_74 = Sketch_8.addLine(4.894344934278314, 2.394344934278312, -7.563632736215193e-032, -5.762896622594646)
+SketchLine_74.setAuxiliary(True)
+SketchConstraintCoincidence_166 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
+SketchConstraintCoincidence_167 = Sketch_8.setCoincident(SketchLine_72.startPoint(), SketchLine_74.endPoint())
+SketchConstraintVertical_11 = Sketch_8.setVertical(SketchLine_72.result())
+SketchLine_75 = Sketch_8.addLine(0, 3.75, 6.25, 3.75)
+SketchLine_75.setAuxiliary(True)
+SketchConstraintCoincidence_168 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_75.startPoint())
+SketchConstraintCoincidence_169 = Sketch_8.setCoincident(SketchLine_73.startPoint(), SketchLine_75.startPoint())
+SketchLine_76 = Sketch_8.addLine(6.25, 3.75, 6.25, 0)
+SketchLine_76.setAuxiliary(True)
+SketchConstraintCoincidence_170 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
+SketchLine_77 = Sketch_8.addLine(6.25, 0, 0, 0)
+SketchLine_77.setAuxiliary(True)
+SketchConstraintCoincidence_171 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
+SketchConstraintCoincidence_172 = Sketch_8.setCoincident(SketchLine_77.endPoint(), SketchLine_72.result())
+SketchConstraintHorizontal_13 = Sketch_8.setHorizontal(SketchLine_77.result())
+SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_75.result())
+SketchConstraintVertical_12 = Sketch_8.setVertical(SketchLine_76.result())
+SketchLine_78 = Sketch_8.addLine(-7.563632736215193e-032, -5.762896622594646, 2.447172467139156, 3.072172467139157)
+SketchLine_78.setAuxiliary(True)
+SketchConstraintCoincidence_173 = Sketch_8.setCoincident(SketchLine_72.startPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_174 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_175 = Sketch_8.setCoincident(SketchLine_78.endPoint(), SketchLine_73.result())
+SketchConstraintPerpendicular_5 = Sketch_8.setPerpendicular(SketchLine_78.result(), SketchLine_73.result())
+SketchPoint_6 = Sketch_8.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_176 = Sketch_8.setCoincident(SketchLine_77.endPoint(), SketchPoint_6.coordinates())
+SketchConstraintCoincidence_176.setName("SketchConstraintCoincidence_20")
+SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_75.result(), "b/2")
+SketchConstraintLength_6 = Sketch_8.setLength(SketchLine_76.result(), "a/2")
+SketchCircle_11 = Sketch_8.addCircle(1.25, -1.25, 1.25)
+SketchCircle_11.setAuxiliary(True)
+SketchConstraintRadius_14 = Sketch_8.setRadius(SketchCircle_11.results()[1], "(b-a)/4")
+SketchConstraintTangent_12 = Sketch_8.setTangent(SketchCircle_11.results()[1], SketchLine_77.result())
+SketchConstraintTangent_13 = Sketch_8.setTangent(SketchCircle_11.results()[1], SketchLine_72.result())
+SketchConstraintTangent_14 = Sketch_8.setTangent(SketchCircle_11.results()[1], SketchLine_74.result())
+SketchConstraintCoincidence_177 = Sketch_8.setCoincident(SketchCircle_11.center(), SketchLine_78.result())
+SketchConstraintCoincidence_177.setName("SketchConstraintCoincidence_21")
+SketchLine_79 = Sketch_8.addLine(4.894344934278314, 2.394344934278312, 6.25, 0)
+SketchLine_79.setAuxiliary(True)
+SketchConstraintCoincidence_178 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_79.startPoint())
+SketchConstraintCoincidence_179 = Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchLine_79.startPoint())
+SketchConstraintCoincidence_180 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_79.endPoint())
+SketchConstraintCoincidence_181 = Sketch_8.setCoincident(SketchLine_77.startPoint(), SketchLine_79.endPoint())
+SketchLine_80 = Sketch_8.addLine(0, 3.75, 6.25, 0)
+SketchLine_80.setName("SketchLine_10")
+SketchLine_80.result().setName("SketchLine_10")
+SketchLine_80.setAuxiliary(True)
+SketchConstraintCoincidence_182 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_80.startPoint())
+SketchConstraintCoincidence_182.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_183 = Sketch_8.setCoincident(SketchLine_73.startPoint(), SketchLine_80.startPoint())
+SketchConstraintCoincidence_183.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_184 = Sketch_8.setCoincident(SketchLine_75.startPoint(), SketchLine_80.startPoint())
+SketchConstraintCoincidence_184.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_185 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_80.endPoint())
+SketchConstraintCoincidence_185.setName("SketchConstraintCoincidence_26")
+SketchConstraintCoincidence_186 = Sketch_8.setCoincident(SketchLine_77.startPoint(), SketchLine_80.endPoint())
+SketchConstraintCoincidence_186.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_187 = Sketch_8.setCoincident(SketchLine_79.endPoint(), SketchLine_80.endPoint())
+SketchConstraintCoincidence_187.setName("SketchConstraintCoincidence_28")
+SketchConstraintPerpendicular_6 = Sketch_8.setPerpendicular(SketchLine_74.result(), SketchLine_80.result())
+SketchConstraintPerpendicular_6.setName("SketchConstraintPerpendicular_3")
+SketchLine_81 = Sketch_8.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_81.setName("SketchLine_11")
+SketchLine_81.result().setName("SketchLine_11")
+SketchLine_82 = Sketch_8.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_82.setName("SketchLine_12")
+SketchLine_82.result().setName("SketchLine_12")
+SketchArc_30 = Sketch_8.addArc(-7.563632736215193e-032, -5.762896622594646, 0, 3.75, 4.894344934278314, 2.394344934278312, True)
+SketchConstraintCoincidence_188 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchArc_30.startPoint())
+SketchConstraintCoincidence_188.setName("SketchConstraintCoincidence_30")
+SketchConstraintCoincidence_189 = Sketch_8.setCoincident(SketchLine_73.startPoint(), SketchArc_30.startPoint())
+SketchConstraintCoincidence_189.setName("SketchConstraintCoincidence_31")
+SketchConstraintCoincidence_190 = Sketch_8.setCoincident(SketchLine_75.startPoint(), SketchArc_30.startPoint())
+SketchConstraintCoincidence_190.setName("SketchConstraintCoincidence_32")
+SketchConstraintCoincidence_191 = Sketch_8.setCoincident(SketchLine_80.startPoint(), SketchArc_30.startPoint())
+SketchConstraintCoincidence_191.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_192 = Sketch_8.setCoincident(SketchArc_30.endPoint(), SketchLine_73.endPoint())
+SketchConstraintCoincidence_192.setName("SketchConstraintCoincidence_34")
+SketchConstraintCoincidence_193 = Sketch_8.setCoincident(SketchArc_30.center(), SketchLine_74.endPoint())
+SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_35")
+SketchArc_31 = Sketch_8.addArc(3.457737973711348, 3.788069295318559e-014, 6.25, 0, 4.894344934278314, 2.394344934278312, False)
+SketchArc_31.setName("SketchArc_4")
+SketchArc_31.result().setName("SketchArc_4")
+SketchArc_31.results()[1].setName("SketchArc_4_2")
+SketchConstraintCoincidence_194 = Sketch_8.setCoincident(SketchArc_31.startPoint(), SketchLine_77.startPoint())
+SketchConstraintCoincidence_194.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_195 = Sketch_8.setCoincident(SketchArc_31.endPoint(), SketchArc_30.endPoint())
+SketchConstraintCoincidence_195.setName("SketchConstraintCoincidence_49")
+SketchConstraintCoincidence_196 = Sketch_8.setCoincident(SketchArc_31.center(), SketchLine_74.result())
+SketchConstraintCoincidence_196.setName("SketchConstraintCoincidence_50")
+SketchConstraintMirror_5 = Sketch_8.addMirror(SketchLine_81.result(), [SketchArc_31.results()[1]])
+[SketchArc_32] = SketchConstraintMirror_5.mirrored()
+SketchArc_32.setName("SketchArc_5")
+SketchArc_32.result().setName("SketchArc_5")
+SketchArc_32.results()[1].setName("SketchArc_5_2")
+SketchConstraintMirror_6 = Sketch_8.addMirror(SketchLine_82.result(), [SketchArc_30.results()[1]])
+[SketchArc_33] = SketchConstraintMirror_6.mirrored()
+SketchArc_33.setName("SketchArc_6")
+SketchArc_33.result().setName("SketchArc_6")
+SketchArc_33.results()[1].setName("SketchArc_6_2")
+SketchArc_34 = Sketch_8.addArc(0, -5.762896622852197, 0, 3.75, -4.894344934278309, 2.394344934278312, False)
+SketchArc_34.setName("SketchArc_7")
+SketchArc_34.result().setName("SketchArc_7")
+SketchArc_34.results()[1].setName("SketchArc_7_2")
+SketchConstraintCoincidence_197 = Sketch_8.setCoincident(SketchArc_34.startPoint(), SketchArc_30.startPoint())
+SketchConstraintCoincidence_197.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_198 = Sketch_8.setCoincident(SketchArc_34.endPoint(), SketchAPI_Arc(SketchArc_32).startPoint())
+SketchConstraintCoincidence_198.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_199 = Sketch_8.setCoincident(SketchArc_34.center(), SketchLine_72.result())
+SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_53")
+SketchArc_35 = Sketch_8.addArc(-3.457737973711317, -7.36102368218484e-015, -6.25, -1.033423289663963e-025, -4.894328381528049, -2.394354865905634, False)
+SketchArc_35.setName("SketchArc_8")
+SketchArc_35.result().setName("SketchArc_8")
+SketchArc_35.results()[1].setName("SketchArc_8_2")
+SketchConstraintCoincidence_200 = Sketch_8.setCoincident(SketchArc_35.startPoint(), SketchAPI_Arc(SketchArc_32).endPoint())
+SketchConstraintCoincidence_200.setName("SketchConstraintCoincidence_54")
+SketchConstraintCoincidence_201 = Sketch_8.setCoincident(SketchArc_35.center(), SketchAPI_Arc(SketchArc_32).center())
+SketchConstraintCoincidence_201.setName("SketchConstraintCoincidence_55")
+SketchArc_36 = Sketch_8.addArc(-4.74373017345514e-021, 5.762896622852203, 3.086813683229417e-021, -3.75, -4.894328381528049, -2.394354865905634, True)
+SketchArc_36.setName("SketchArc_9")
+SketchArc_36.result().setName("SketchArc_9")
+SketchArc_36.results()[1].setName("SketchArc_9_2")
+SketchConstraintCoincidence_202 = Sketch_8.setCoincident(SketchArc_36.startPoint(), SketchAPI_Arc(SketchArc_33).endPoint())
+SketchConstraintCoincidence_202.setName("SketchConstraintCoincidence_56")
+SketchConstraintCoincidence_203 = Sketch_8.setCoincident(SketchArc_36.center(), SketchAPI_Arc(SketchArc_33).center())
+SketchConstraintCoincidence_203.setName("SketchConstraintCoincidence_57")
+SketchConstraintCoincidence_204 = Sketch_8.setCoincident(SketchArc_36.endPoint(), SketchArc_35.endPoint())
+SketchConstraintCoincidence_204.setName("SketchConstraintCoincidence_58")
+SketchArc_37 = Sketch_8.addArc(2.701932032626286, 0.4279300522100024, 6.25, 0, 4.894344934278309, -2.394344934278312, True)
+SketchArc_37.setName("SketchArc_10")
+SketchArc_37.result().setName("SketchArc_10")
+SketchArc_37.results()[1].setName("SketchArc_10_2")
+SketchConstraintCoincidence_205 = Sketch_8.setCoincident(SketchArc_37.startPoint(), SketchArc_31.startPoint())
+SketchConstraintCoincidence_205.setName("SketchConstraintCoincidence_59")
+SketchConstraintCoincidence_206 = Sketch_8.setCoincident(SketchArc_37.endPoint(), SketchAPI_Arc(SketchArc_33).startPoint())
+SketchConstraintCoincidence_206.setName("SketchConstraintCoincidence_60")
+model.do()
+Sketch_9 = model.addSketch(Part_4_doc, model.defaultPlane("XOZ"))
+SketchArc_38 = Sketch_9.addArc(75, 0, 21.9522369740045, 53.01825004597796, 20.93617039352901, -51.98174995402206, False)
+SketchArc_38.setName("SketchArc_3")
+SketchArc_38.result().setName("SketchArc_3")
+SketchArc_38.results()[1].setName("SketchArc_3_2")
+SketchArc_38.setAuxiliary(True)
+SketchConstraintRadius_15 = Sketch_9.setRadius(SketchArc_38.results()[1], 75)
+SketchLine_83 = Sketch_9.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_83.setName("SketchLine_13")
+SketchLine_83.result().setName("SketchLine_13")
+SketchConstraintCoincidence_207 = Sketch_9.setCoincident(SketchArc_38.center(), SketchLine_83.result())
+SketchConstraintCoincidence_207.setName("SketchConstraintCoincidence_38")
+SketchConstraintCoincidence_208 = Sketch_9.setCoincident(SketchLine_83.startPoint(), SketchArc_38.results()[1])
+SketchConstraintCoincidence_208.setName("SketchConstraintCoincidence_39")
+SketchLine_84 = Sketch_9.addLine(16.9522369740045, -56.98174995402205, 16.9522369740045, -46.98174995402206)
+SketchLine_84.setName("SketchLine_14")
+SketchLine_84.result().setName("SketchLine_14")
+SketchLine_85 = Sketch_9.addLine(16.9522369740045, -46.98174995402206, 36.95223697400451, -46.98174995402206)
+SketchLine_85.setName("SketchLine_15")
+SketchLine_85.result().setName("SketchLine_15")
+SketchConstraintCoincidence_209 = Sketch_9.setCoincident(SketchLine_84.endPoint(), SketchLine_85.startPoint())
+SketchConstraintCoincidence_209.setName("SketchConstraintCoincidence_40")
+SketchLine_86 = Sketch_9.addLine(36.95223697400451, -46.98174995402206, 31.17873428210827, -56.98174995402205)
+SketchLine_86.setName("SketchLine_16")
+SketchLine_86.result().setName("SketchLine_16")
+SketchConstraintCoincidence_210 = Sketch_9.setCoincident(SketchLine_85.endPoint(), SketchLine_86.startPoint())
+SketchConstraintCoincidence_210.setName("SketchConstraintCoincidence_41")
+SketchLine_87 = Sketch_9.addLine(31.17873428210827, -56.98174995402205, 16.9522369740045, -56.98174995402205)
+SketchLine_87.setName("SketchLine_17")
+SketchLine_87.result().setName("SketchLine_17")
+SketchConstraintCoincidence_211 = Sketch_9.setCoincident(SketchLine_86.endPoint(), SketchLine_87.startPoint())
+SketchConstraintCoincidence_211.setName("SketchConstraintCoincidence_42")
+SketchConstraintCoincidence_212 = Sketch_9.setCoincident(SketchLine_84.startPoint(), SketchLine_87.endPoint())
+SketchConstraintCoincidence_212.setName("SketchConstraintCoincidence_43")
+SketchConstraintHorizontal_15 = Sketch_9.setHorizontal(SketchLine_85.result())
+SketchConstraintHorizontal_16 = Sketch_9.setHorizontal(SketchLine_87.result())
+SketchConstraintVertical_13 = Sketch_9.setVertical(SketchLine_84.result())
+SketchConstraintAngle_6 = Sketch_9.setAngleComplementary(SketchLine_86.result(), SketchLine_87.result(), 60.00000000000006)
+SketchConstraintDistance_26 = Sketch_9.setDistance(SketchLine_85.endPoint(), SketchLine_84.result(), 20)
+SketchConstraintDistance_27 = Sketch_9.setDistance(SketchLine_84.startPoint(), SketchLine_85.result(), 10)
+SketchLine_88 = Sketch_9.addLine(21.9522369740045, 53.01825004597796, 21.9522369740045, 0)
+SketchLine_88.setName("SketchLine_18")
+SketchLine_88.result().setName("SketchLine_18")
+SketchLine_88.setAuxiliary(True)
+SketchConstraintCoincidence_213 = Sketch_9.setCoincident(SketchArc_38.startPoint(), SketchLine_88.startPoint())
+SketchConstraintCoincidence_213.setName("SketchConstraintCoincidence_44")
+SketchConstraintCoincidence_214 = Sketch_9.setCoincident(SketchLine_88.endPoint(), SketchLine_83.result())
+SketchConstraintCoincidence_214.setName("SketchConstraintCoincidence_45")
+SketchConstraintVertical_14 = Sketch_9.setVertical(SketchLine_88.result())
+SketchConstraintDistance_28 = Sketch_9.setDistance(SketchLine_84.endPoint(), SketchLine_88.result(), 5)
+SketchConstraintDistance_29 = Sketch_9.setDistance(SketchArc_38.startPoint(), SketchLine_85.result(), 100)
+SketchCircle_12 = Sketch_9.addCircle(21.9522369740045, 53.01825004597796, 8)
+SketchConstraintCoincidence_215 = Sketch_9.setCoincident(SketchArc_38.startPoint(), SketchCircle_12.center())
+SketchConstraintCoincidence_215.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_216 = Sketch_9.setCoincident(SketchLine_88.startPoint(), SketchCircle_12.center())
+SketchConstraintCoincidence_216.setName("SketchConstraintCoincidence_47")
+SketchConstraintRadius_16 = Sketch_9.setRadius(SketchCircle_12.results()[1], 8)
+SketchCircle_13 = Sketch_9.addCircle(21.9522369740045, 53.01825004597796, 4)
+SketchConstraintCoincidence_217 = Sketch_9.setCoincident(SketchArc_38.startPoint(), SketchCircle_13.center())
+SketchConstraintCoincidence_217.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_218 = Sketch_9.setCoincident(SketchLine_88.startPoint(), SketchCircle_13.center())
+SketchConstraintCoincidence_218.setName("SketchConstraintCoincidence_62")
+SketchConstraintCoincidence_219 = Sketch_9.setCoincident(SketchCircle_12.center(), SketchCircle_13.center())
+SketchConstraintCoincidence_219.setName("SketchConstraintCoincidence_63")
+SketchConstraintRadius_17 = Sketch_9.setRadius(SketchCircle_13.results()[1], 4)
+SketchLine_89 = Sketch_9.addLine(21.9522369740045, 53.01825004597796, 39.68353296044558, 53.01825004597796)
+SketchLine_89.setName("SketchLine_19")
+SketchLine_89.result().setName("SketchLine_19")
+SketchLine_89.setAuxiliary(True)
+SketchConstraintCoincidence_220 = Sketch_9.setCoincident(SketchArc_38.startPoint(), SketchLine_89.startPoint())
+SketchConstraintCoincidence_220.setName("SketchConstraintCoincidence_64")
+SketchConstraintCoincidence_221 = Sketch_9.setCoincident(SketchLine_88.startPoint(), SketchLine_89.startPoint())
+SketchConstraintCoincidence_221.setName("SketchConstraintCoincidence_65")
+SketchConstraintCoincidence_222 = Sketch_9.setCoincident(SketchCircle_12.center(), SketchLine_89.startPoint())
+SketchConstraintCoincidence_222.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_223 = Sketch_9.setCoincident(SketchCircle_13.center(), SketchLine_89.startPoint())
+SketchConstraintCoincidence_223.setName("SketchConstraintCoincidence_67")
+SketchConstraintHorizontal_17 = Sketch_9.setHorizontal(SketchLine_89.result())
+SketchConstraintDistance_30 = Sketch_9.setDistance(SketchArc_38.endPoint(), SketchLine_89.result(), 105)
+SketchLine_90 = Sketch_9.addLine(75, 0, 20.93617039352901, -51.98174995402206)
+SketchLine_90.setName("SketchLine_20")
+SketchLine_90.result().setName("SketchLine_20")
+SketchLine_90.setAuxiliary(True)
+SketchConstraintCoincidence_224 = Sketch_9.setCoincident(SketchArc_38.center(), SketchLine_90.startPoint())
+SketchConstraintCoincidence_224.setName("SketchConstraintCoincidence_68")
+SketchConstraintCoincidence_225 = Sketch_9.setCoincident(SketchArc_38.endPoint(), SketchLine_90.endPoint())
+SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_69")
+SketchLine_91 = Sketch_9.addLine(21.9522369740045, 53.01825004597796, 0, 10)
+SketchLine_91.setName("SketchLine_21")
+SketchLine_91.result().setName("SketchLine_21")
+SketchLine_91.setAuxiliary(True)
+SketchConstraintCoincidence_226 = Sketch_9.setCoincident(SketchArc_38.startPoint(), SketchLine_91.startPoint())
+SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_70")
+SketchConstraintCoincidence_227 = Sketch_9.setCoincident(SketchLine_88.startPoint(), SketchLine_91.startPoint())
+SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_71")
+SketchConstraintCoincidence_228 = Sketch_9.setCoincident(SketchCircle_12.center(), SketchLine_91.startPoint())
+SketchConstraintCoincidence_228.setName("SketchConstraintCoincidence_72")
+SketchConstraintCoincidence_229 = Sketch_9.setCoincident(SketchCircle_13.center(), SketchLine_91.startPoint())
+SketchConstraintCoincidence_229.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_230 = Sketch_9.setCoincident(SketchLine_89.startPoint(), SketchLine_91.startPoint())
+SketchConstraintCoincidence_230.setName("SketchConstraintCoincidence_74")
+SketchLine_92 = Sketch_9.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_92.setName("SketchLine_22")
+SketchLine_92.result().setName("SketchLine_22")
+SketchConstraintCoincidence_231 = Sketch_9.setCoincident(SketchLine_91.endPoint(), SketchLine_92.result())
+SketchConstraintCoincidence_231.setName("SketchConstraintCoincidence_75")
+SketchConstraintDistance_31 = Sketch_9.setDistance(SketchLine_91.endPoint(), SketchLine_83.result(), 10)
+model.do()
+Face_3 = model.addFace(Part_4_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchArc_4_2f-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f")])
+Axis_6 = model.addAxis(Part_4_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3-SketchLine_20s"))
+Rotation_5 = model.addRotation(Part_4_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
+Pipe_3 = model.addPipe(Part_4_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2"))
+Extrusion_7 = model.addExtrusion(Part_4_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2")
+Boolean_10 = model.addFuse(Part_4_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Extrusion_8 = model.addExtrusion(Part_4_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
+Boolean_11 = model.addCut(Part_4_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Translation_3 = model.addTranslation(Part_4_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
+model.do()
+Translation_4 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_2/"), model.selection("COMPOUND", "Part_3/"), model.selection("COMPOUND", "Part_4/")], model.selection("EDGE", "OX"), -40)
+Rotation_6 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_2/")], model.selection("EDGE", "OZ"), 120)
+Rotation_7 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_3/")], model.selection("EDGE", "OZ"), 240)
+Part_5 = model.addPart(partSet)
+Part_5.setName("Rod part")
+Part_5_doc = Part_5.document()
+Sketch_10 = model.addSketch(Part_5_doc, model.defaultPlane("YOZ"))
+SketchLine_93 = Sketch_10.addLine(0, 25, 6, 25)
+SketchLine_94 = Sketch_10.addLine(6, 25, 6, -75)
+SketchConstraintCoincidence_232 = Sketch_10.setCoincident(SketchLine_93.endPoint(), SketchLine_94.startPoint())
+SketchLine_95 = Sketch_10.addLine(6, -75, 4, -75)
+SketchConstraintCoincidence_233 = Sketch_10.setCoincident(SketchLine_94.endPoint(), SketchLine_95.startPoint())
+SketchLine_96 = Sketch_10.addLine(4, -75, 4, -81.00000000054168)
+SketchConstraintCoincidence_234 = Sketch_10.setCoincident(SketchLine_95.endPoint(), SketchLine_96.startPoint())
+SketchLine_97 = Sketch_10.addLine(4, -81.00000000054168, 0, -85)
+SketchConstraintCoincidence_235 = Sketch_10.setCoincident(SketchLine_96.endPoint(), SketchLine_97.startPoint())
+SketchLine_98 = Sketch_10.addLine(0, -85, 0, 25)
+SketchConstraintCoincidence_236 = Sketch_10.setCoincident(SketchLine_97.endPoint(), SketchLine_98.startPoint())
+SketchConstraintCoincidence_237 = Sketch_10.setCoincident(SketchLine_93.startPoint(), SketchLine_98.endPoint())
+SketchConstraintVertical_15 = Sketch_10.setVertical(SketchLine_98.result())
+SketchConstraintVertical_16 = Sketch_10.setVertical(SketchLine_94.result())
+SketchConstraintVertical_17 = Sketch_10.setVertical(SketchLine_96.result())
+SketchConstraintHorizontal_18 = Sketch_10.setHorizontal(SketchLine_93.result())
+SketchConstraintHorizontal_19 = Sketch_10.setHorizontal(SketchLine_95.result())
+SketchConstraintAngle_7 = Sketch_10.setAngle(SketchLine_97.result(), SketchLine_98.result(), 45.00000000387975)
+SketchConstraintDistance_32 = Sketch_10.setDistance(SketchLine_97.endPoint(), SketchLine_95.result(), 10)
+SketchConstraintDistance_33 = Sketch_10.setDistance(SketchLine_97.startPoint(), SketchLine_98.result(), 4)
+SketchConstraintLength_7 = Sketch_10.setLength(SketchLine_93.result(), "Rod/2")
+SketchConstraintDistance_34 = Sketch_10.setDistance(SketchLine_97.endPoint(), SketchLine_93.result(), 110)
+SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_238 = Sketch_10.setCoincident(SketchPoint_7.coordinates(), SketchLine_98.result())
+SketchLine_99 = Sketch_10.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintDistance_35 = Sketch_10.setDistance(SketchLine_98.endPoint(), SketchLine_99.result(), "Thickness")
+model.do()
+Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0)
+Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+SketchCircle_14 = Sketch_11.addCircle(0, 0, 8.5)
+SketchCircle_14.setAuxiliary(True)
+SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_6e"))
+SketchConstraintCoincidence_239 = Sketch_11.setCoincident(SketchCircle_14.center(), SketchPoint_8.result())
+SketchConstraintRadius_18 = Sketch_11.setRadius(SketchCircle_14.results()[1], "(Rod+5)/2")
+SketchLine_100 = Sketch_11.addLine(-8.5, -4.907477288111821, -8.5, 4.907477288111821)
+SketchLine_101 = Sketch_11.addLine(-8.5, 4.907477288111821, -2.182790672831509e-014, 9.814954576223595)
+SketchConstraintCoincidence_240 = Sketch_11.setCoincident(SketchLine_100.endPoint(), SketchLine_101.startPoint())
+SketchLine_102 = Sketch_11.addLine(-2.182790672831509e-014, 9.814954576223595, 8.5, 4.907477288111624)
+SketchConstraintCoincidence_241 = Sketch_11.setCoincident(SketchLine_101.endPoint(), SketchLine_102.startPoint())
+SketchLine_103 = Sketch_11.addLine(8.5, 4.907477288111624, 8.5, -4.907477288111966)
+SketchConstraintCoincidence_242 = Sketch_11.setCoincident(SketchLine_102.endPoint(), SketchLine_103.startPoint())
+SketchLine_104 = Sketch_11.addLine(8.5, -4.907477288111966, 4.843087198023196e-015, -9.814954576223641)
+SketchConstraintCoincidence_243 = Sketch_11.setCoincident(SketchLine_103.endPoint(), SketchLine_104.startPoint())
+SketchLine_105 = Sketch_11.addLine(4.843087198023196e-015, -9.814954576223641, -8.5, -4.907477288111821)
+SketchConstraintCoincidence_244 = Sketch_11.setCoincident(SketchLine_104.endPoint(), SketchLine_105.startPoint())
+SketchConstraintCoincidence_245 = Sketch_11.setCoincident(SketchLine_100.startPoint(), SketchLine_105.endPoint())
+SketchConstraintVertical_18 = Sketch_11.setVertical(SketchLine_100.result())
+SketchConstraintVertical_19 = Sketch_11.setVertical(SketchLine_103.result())
+SketchConstraintTangent_15 = Sketch_11.setTangent(SketchCircle_14.results()[1], SketchLine_103.result())
+SketchConstraintTangent_16 = Sketch_11.setTangent(SketchCircle_14.results()[1], SketchLine_100.result())
+SketchConstraintTangent_17 = Sketch_11.setTangent(SketchLine_104.result(), SketchCircle_14.results()[1])
+SketchConstraintTangent_18 = Sketch_11.setTangent(SketchLine_105.result(), SketchCircle_14.results()[1])
+SketchConstraintTangent_19 = Sketch_11.setTangent(SketchLine_101.result(), SketchCircle_14.results()[1])
+SketchConstraintTangent_20 = Sketch_11.setTangent(SketchLine_102.result(), SketchCircle_14.results()[1])
+SketchConstraintEqual_7 = Sketch_11.setEqual(SketchLine_100.result(), SketchLine_101.result())
+SketchConstraintEqual_8 = Sketch_11.setEqual(SketchLine_101.result(), SketchLine_102.result())
+SketchConstraintEqual_9 = Sketch_11.setEqual(SketchLine_102.result(), SketchLine_103.result())
+SketchConstraintEqual_10 = Sketch_11.setEqual(SketchLine_103.result(), SketchLine_104.result())
+model.do()
+Extrusion_9 = model.addExtrusion(Part_5_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_9r-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), 25, 0)
+Sketch_12 = model.addSketch(Part_5_doc, model.standardPlane("YOZ"))
+SketchLine_106 = Sketch_12.addLine(9.814954576223595, 48.99999999999999, 9.814954576223595, 52.35726558990813)
+SketchLine_107 = Sketch_12.addLine(9.814954576223595, 52.35726558990813, 4, 52.35726558990813)
+SketchConstraintCoincidence_246 = Sketch_12.setCoincident(SketchLine_106.endPoint(), SketchLine_107.startPoint())
+SketchLine_108 = Sketch_12.addLine(4, 52.35726558990813, 9.814954576223595, 48.99999999999999)
+SketchConstraintCoincidence_247 = Sketch_12.setCoincident(SketchLine_107.endPoint(), SketchLine_108.startPoint())
+SketchConstraintCoincidence_248 = Sketch_12.setCoincident(SketchLine_106.startPoint(), SketchLine_108.endPoint())
+SketchConstraintHorizontal_20 = Sketch_12.setHorizontal(SketchLine_107.result())
+SketchConstraintVertical_20 = Sketch_12.setVertical(SketchLine_106.result())
+SketchConstraintAngle_8 = Sketch_12.setAngle(SketchLine_108.result(), SketchLine_107.result(), 30)
+SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"))
+SketchConstraintCoincidence_249 = Sketch_12.setCoincident(SketchLine_108.endPoint(), SketchLine_109.result())
+SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
+SketchLine_110 = SketchProjection_2.createdFeature()
+SketchConstraintDistance_36 = Sketch_12.setDistance(SketchLine_110.result(), SketchLine_108.endPoint(), 1)
+SketchLine_111 = Sketch_12.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(), SketchLine_111.result(), 4)
+model.do()
+Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Boolean_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
+Boolean_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Revolution_1_1")], [])
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Part_1, 1)
+model.testNbSubResults(Part_1, [0])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [52])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [338])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [676])
+model.testResultsVolumes(Part_1, [48835.415011945384321734309196472])
+
+model.testNbResults(Translation_4, 3)
+model.testNbSubResults(Translation_4, [0, 0, 0])
+model.testNbSubShapes(Translation_4, GeomAPI_Shape.SOLID, [1, 1, 1])
+model.testNbSubShapes(Translation_4, GeomAPI_Shape.FACE, [19, 19, 19])
+model.testNbSubShapes(Translation_4, GeomAPI_Shape.EDGE, [102, 102, 102])
+model.testNbSubShapes(Translation_4, GeomAPI_Shape.VERTEX, [204, 204, 204])
+model.testResultsVolumes(Translation_4, [11001.773459236308553954586386681, 11001.767903866752021713182330132, 11001.765201230666207266040146351])
+
+model.testNbResults(Rotation_6, 1)
+model.testNbSubResults(Rotation_6, [0])
+model.testNbSubShapes(Rotation_6, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Rotation_6, GeomAPI_Shape.FACE, [19])
+model.testNbSubShapes(Rotation_6, GeomAPI_Shape.EDGE, [102])
+model.testNbSubShapes(Rotation_6, GeomAPI_Shape.VERTEX, [204])
+model.testResultsVolumes(Rotation_6, [11001.767903866750202723778784275])
+
+model.testNbResults(Rotation_7, 1)
+model.testNbSubResults(Rotation_7, [0])
+model.testNbSubShapes(Rotation_7, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Rotation_7, GeomAPI_Shape.FACE, [19])
+model.testNbSubShapes(Rotation_7, GeomAPI_Shape.EDGE, [102])
+model.testNbSubShapes(Rotation_7, GeomAPI_Shape.VERTEX, [204])
+model.testResultsVolumes(Rotation_7, [11001.765201230671664234250783920])
+
+model.testNbResults(Part_5, 1)
+model.testNbSubResults(Part_5, [0])
+model.testNbSubShapes(Part_5, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Part_5, GeomAPI_Shape.FACE, [13])
+model.testNbSubShapes(Part_5, GeomAPI_Shape.EDGE, [55])
+model.testNbSubShapes(Part_5, GeomAPI_Shape.VERTEX, [110])
+model.testResultsVolumes(Part_5, [17921.797961347954696975648403168])
+
+assert(model.checkPythonDump())