--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-20, -11.54700538379252, -40, 11.54700538379252)
+SketchLine_2 = Sketch_1.addLine(-40, 11.54700538379252, -20, 11.54700538379251)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-20, 11.54700538379251, -40, -11.54700538379252)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-40, -11.54700538379252, -20, -11.54700538379252)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-20, 11.54700538379251, -20, -11.54700538379252)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-15, 8.660254037844391, -15, -8.660254037844384)
+SketchLine_7 = Sketch_1.addLine(-15, -8.660254037844384, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(0, 0, -15, 8.660254037844391)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_8.endPoint())
+SketchCircle_1 = Sketch_1.addCircle(12, 0, 10)
+SketchLine_9 = Sketch_1.addLine(7, 8.660254037844386, 17, 8.660254037844386)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchCircle_1.results()[1])
+SketchLine_10 = Sketch_1.addLine(7, -8.660254037844386, 17, -8.660254037844386)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_8.result(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_9.result(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_10.result(), SketchLine_6.endPoint())
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
+SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_10.result(), SketchLine_9.result())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_2.result(), SketchLine_4.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_8.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_10.result(), SketchLine_9.result())
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_1.result())
+SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_6.result(), SketchLine_5.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_9.result(), 10)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_1.center(), SketchLine_7.endPoint(), 12, True)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_7.endPoint(), SketchLine_5.result(), 20, True)
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_9.result())
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
+SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_8.result())
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 20)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), 10, 0)
+Group_1_objects = [model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_4"), model.selection("FACE", "Extrusion_1_1_3/Generated_Face&Sketch_1/SketchLine_5"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_2"), model.selection("FACE", "Extrusion_1_1_1/Generated_Face&Sketch_1/SketchLine_1"), model.selection("FACE", "Extrusion_1_1_2/Generated_Face&Sketch_1/SketchLine_3"), model.selection("FACE", "Extrusion_1_3/Generated_Face&Sketch_1/SketchLine_6"), model.selection("FACE", "Extrusion_1_3/Generated_Face&Sketch_1/SketchLine_7"), model.selection("FACE", "Extrusion_1_3/Generated_Face&Sketch_1/SketchLine_8")]
+Group_1 = model.addGroup(Part_1_doc, Group_1_objects)
+Group_1.setName("planar")
+Group_1.result().setName("planar")
+Group_2 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_3/From_Face"), model.selection("FACE", "Extrusion_1_3/To_Face")])
+Group_2.setName("triangle_top_bottom")
+Group_2.result().setName("triangle_top_bottom")
+Field_1 = model.addField(Part_1_doc, 1, "DOUBLE", 1, ["Comp 1"], [])
+Field_1.addStep(0, 0, [[7]])
+model.do()
+model.exportToGEOM(Part_1_doc)
+model.end()
+
+# check what is exported to GEOM
+from salome.geom import geomBuilder
+
+import os
+import tempfile
+
+salome.salome_init(1)
+aComp = salome.myStudy.FindComponent("GEOM")
+iterator = salome.myStudy.NewChildIterator(aComp)
+aComponents = []
+while iterator.More():
+ aComponents.append(iterator.Value())
+ iterator.Next()
+
+assert len(aComponents) == 3
+
+ok, group_0_1 = aComponents[0].FindSubObject(1)
+assert ok
+assert group_0_1.GetName() == "planar"
+
+ok, group_0_2 = aComponents[0].FindSubObject(2)
+assert ok
+assert group_0_2.GetName() == "Field_1"
+
+ok, group_0_3 = aComponents[0].FindSubObject(3)
+assert not ok
+
+
+ok, group_1_1 = aComponents[1].FindSubObject(1)
+assert ok
+assert group_1_1.GetName() == "Field_1"
+
+ok, group_1_2 = aComponents[1].FindSubObject(2)
+assert not ok
+
+
+ok, group_2_1 = aComponents[2].FindSubObject(1)
+assert ok
+assert group_2_1.GetName() == "planar"
+
+ok, group_2_2 = aComponents[2].FindSubObject(2)
+assert ok
+assert group_2_2.GetName() == "triangle_top_bottom"
+
+ok, group_2_3 = aComponents[2].FindSubObject(3)
+assert ok
+assert group_2_3.GetName() == "Field_1"
+
+ok, group_2_4 = aComponents[2].FindSubObject(4)
+assert not ok
