--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# -*- coding: utf-8 -*-
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-17.23654191510763, 16.36770059625792, -4.760492650097915, 19.42518236023452)
+SketchLine_2 = Sketch_1.addLine(20, 2.492755359431925e-15, 20, -31)
+SketchLine_3 = Sketch_1.addLine(-25.74772708486752, -20, -17.21320343559642, -20)
+SketchLine_4 = Sketch_1.addLine(-13.67766952966368, -21.46446609406726, 2.928932188134523, -38.07106781186547)
+SketchArc_1 = Sketch_1.addArc(-17.21320343559642, -25, -13.67766952966368, -21.46446609406726, -17.21320343559642, -20, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.endPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchArc_2 = Sketch_1.addArc(0, 6.520200294596256e-23, -4.760492650097915, 19.42518236023452, 20, 2.492755359431925e-15, True)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_2.startPoint())
+SketchArc_3 = Sketch_1.addArc(-12, -5, -29.79117622747561, -17.94117647058824, -17.23654191510763, 16.36770059625792, True)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_1.result())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
+SketchArc_4 = Sketch_1.addArc(-25.74772708486752, -15, -29.79117622747561, -17.94117647058824, -25.74772708486752, -20, False)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchArc_3.startPoint())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_3.result())
+SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_3.results()[1])
+SketchArc_5 = Sketch_1.addArc(10, -31, 20, -31, 2.928932188134523, -38.07106781186547, True)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_5.startPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.endPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
+SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_4.result())
+SketchConstraintTangent_7 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_5.results()[1])
+SketchConstraintTangent_8 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_2.results()[1])
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 31)
+SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
+SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_3.result(), SketchLine_4.result(), 135)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 5)
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_4.results()[1], SketchArc_1.results()[1])
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_5.results()[1], 10)
+SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_2.results()[1], 20)
+SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_3.results()[1], 22)
+SketchCircle_1 = Sketch_1.addCircle(-22, -5, 7.5)
+SketchLine_5 = Sketch_1.addLine(-22, -5, -12, -5)
+SketchLine_5.setAuxiliary(True)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_5.endPoint())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintRadius_5 = Sketch_1.setRadius(SketchCircle_1.results()[1], 7.5)
+SketchCircle_2 = Sketch_1.addCircle(0, 6.520200294596256e-23, 10)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.center(), SketchCircle_2.center())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
+SketchConstraintRadius_6 = Sketch_1.setRadius(SketchCircle_2.results()[1], 10)
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchCircle_2.center(), SketchArc_3.center(), 5)
+SketchCircle_3 = Sketch_1.addCircle(7, -25, 7.5)
+SketchConstraintRadius_7 = Sketch_1.setRadius(SketchCircle_3.results()[1], 7.5)
+SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchArc_2.center(), SketchCircle_3.center(), 7)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_2.center(), SketchLine_3.result(), 20, True)
+SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchArc_2.center(), SketchCircle_3.center(), 25)
+SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_5.endPoint(), SketchArc_2.center(), 12)
+SketchConstraintDistanceHorizontal_3 = Sketch_1.setHorizontalDistance(SketchCircle_1.center(), SketchArc_2.center(), 22)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchAPI_Point(SketchPoint_1).coordinates())
+SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_3_2f-SketchArc_4_2f-SketchLine_3f-SketchArc_1_2r-SketchLine_4f-SketchArc_5_2f-SketchLine_2r-SketchArc_2_2f-SketchLine_1r-SketchCircle_1_2r-SketchCircle_2_2r-SketchCircle_3_2r")], model.selection(), 6.5, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"))
+SketchLine_6 = Sketch_2.addLine(14.45330132699559, 5.092287733454298, -12.15814035598059, 5.092287733454298)
+SketchLine_7 = Sketch_2.addLine(-12.15814035598059, 5.092287733454298, -12.15814035598059, 23.78152371848275)
+SketchLine_8 = Sketch_2.addLine(-12.15814035598059, 23.78152371848275, 14.45330132699559, 23.78152371848275)
+SketchLine_9 = Sketch_2.addLine(14.45330132699559, 23.78152371848275, 14.45330132699559, 5.092287733454298)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_9.result())
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 0, 100, [model.selection("SOLID", "Extrusion_1_1")])
+model.do()
+model.testHaveNamingSubshapes(Extrusion_1, model, Part_1_doc)
+model.end()
+assert(model.checkPythonDump())
