SketchLine_4.result().setName("SketchLine_2")
SketchLine_4.setAuxiliary(True)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
-SketchLine_5 = Sketch_1.addLine(44, 9.237604307034236, 44, 70)
+SketchLine_5 = Sketch_1.addLine(44, 9.237604307034019, 44, 70)
SketchLine_5.setName("SketchLine_8")
SketchLine_5.result().setName("SketchLine_8")
SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -59.99999999999996, -56.92304845413265, -54.80384757729332)
SketchLine_6.setName("SketchLine_3")
SketchLine_6.result().setName("SketchLine_3")
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
-SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39.00000000000029, 0.5773502691898111)
+SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 38.99999999999999, 0.5773502691896226)
SketchLine_7.setName("SketchLine_9")
SketchLine_7.result().setName("SketchLine_9")
-SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137769)
+SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137744)
SketchLine_8.setName("SketchLine_4")
SketchLine_8.result().setName("SketchLine_4")
SketchLine_8.setAuxiliary(True)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
-SketchLine_9 = Sketch_1.addLine(44, 3.464101615137769, 44, 70)
+SketchLine_9 = Sketch_1.addLine(44, 3.464101615137744, 44, 70)
SketchLine_9.setName("SketchLine_5")
SketchLine_9.result().setName("SketchLine_5")
SketchLine_9.setAuxiliary(True)
SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
-SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), "H")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), "H", False)
SketchLine_11 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
SketchLine_11.setName("SketchLine_7")
SketchLine_11.result().setName("SketchLine_7")
-SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50)
-SketchArc_1 = Sketch_1.addArc(34, 9.237604307034236, 39.00000000000029, 0.5773502691898111, 44, 9.237604307034236, False)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50, False)
+SketchArc_1 = Sketch_1.addArc(34, 9.237604307034017, 38.99999999999999, 0.5773502691896226, 44, 9.237604307034019, False)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_2.endPoint())
SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_4.result())
-SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70, False)
SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_2.result(), SketchLine_6.result())
-SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6)
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6, False)
SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_7.result())
SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 119.9999999999999)
-SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120)
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120, False)
SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
-SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1)
+SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1, False)
SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
-SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55)
-SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22)
+SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55, False)
+SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22, False)
SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
-SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70)
+SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70, False)
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
-Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674)
SketchLine_20.setName("SketchLine_36")
SketchLine_20.result().setName("SketchLine_36")
SketchLine_21.setName("SketchLine_38")
SketchLine_21.result().setName("SketchLine_38")
SketchLine_22 = Sketch_4.addLine(-8.5, 15.2970585407786, -8.499999999999998, 12)
+SketchLine_22.setName("SketchLine_22")
+SketchLine_22.result().setName("SketchLine_22")
SketchLine_23 = Sketch_4.addLine(-10.1, 44.00000000000001, -9.999999999999854, 44.00000000000001)
SketchLine_23.setName("SketchLine_37")
SketchLine_23.result().setName("SketchLine_37")
SketchLine_25.setName("SketchLine_24")
SketchLine_25.result().setName("SketchLine_24")
SketchLine_26 = Sketch_4.addLine(4, 44.00000000000001, 10.1, 44)
+SketchLine_26.setName("SketchLine_26")
+SketchLine_26.result().setName("SketchLine_26")
SketchLine_26.setAuxiliary(True)
SketchLine_27 = Sketch_4.addLine(4, 17.03672503740084, 4, 44.00000000000001)
+SketchLine_27.setName("SketchLine_27")
+SketchLine_27.result().setName("SketchLine_27")
SketchLine_27.setAuxiliary(True)
SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_26.startPoint())
SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45.00000000000001)
+SketchLine_28.setName("SketchLine_28")
+SketchLine_28.result().setName("SketchLine_28")
SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_28.startPoint())
SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
SketchLine_29 = Sketch_4.addLine(10.1, 45.00000000000001, -10.1, 45)
+SketchLine_29.setName("SketchLine_29")
+SketchLine_29.result().setName("SketchLine_29")
SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44.00000000000001)
+SketchLine_30.setName("SketchLine_30")
+SketchLine_30.result().setName("SketchLine_30")
SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_36")
SketchLine_31 = Sketch_4.addLine(-10.1, 44.00000000000001, -4, 44.00000000000001)
+SketchLine_31.setName("SketchLine_31")
+SketchLine_31.result().setName("SketchLine_31")
SketchLine_31.setAuxiliary(True)
SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_37")
SketchLine_33 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
SketchLine_33.setName("SketchLine_32")
SketchLine_33.result().setName("SketchLine_32")
-SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5)
+SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5, False)
SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
SketchLine_34 = Sketch_4.addLine(-8.499999999999998, 12, 8.5, 12)
SketchLine_34.setName("SketchLine_33")
SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_27.startPoint())
SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
SketchArc_7 = Sketch_4.addArc(-10, 21.26617031813674, -7.446808510638298, 15.83650981137842, -4, 21.26617031813674, False)
+SketchArc_7.setName("SketchArc_7")
+SketchArc_7.result().setName("SketchArc_7")
+SketchArc_7.results()[1].setName("SketchArc_7_2")
SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
SketchLine_35 = Sketch_4.addLine(-4, 44.00000000000001, -4, 21.26617031813674)
SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
-SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5)
-SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4)
-SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4)
+SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5, False)
+SketchConstraintDistance_11.setName("SketchConstraintDistance_11")
+SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4, False)
+SketchConstraintDistance_12.setName("SketchConstraintDistance_12")
+SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4, False)
SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
SketchArc_9 = Sketch_4.addArc(-10, 38.00000000000001, -4, 38.00000000000001, -9.999999999999854, 44.00000000000001, False)
SketchArc_9.setName("SketchArc_10")
SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_72")
SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
-SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1)
+SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1, False)
SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
-SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1)
+SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1, False)
SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
SketchLine_37.setName("SketchLine_40")
SketchLine_37.result().setName("SketchLine_40")
-SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44)
+SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44, False)
SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
-SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1)
+SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1, False)
SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
-SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1)
+SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1, False)
SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_3.center(), SketchCircle_3.center())
SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_149")
SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_4.center(), SketchArc_3.center())
SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_150")
-SketchConstraintDistance_19 = Sketch_4.setDistance(SketchArc_4.center(), SketchLine_34.result(), 12)
+SketchConstraintDistance_19 = Sketch_4.setDistance(SketchArc_4.center(), SketchLine_34.result(), 12, False)
SketchConstraintDistance_19.setName("SketchConstraintDistance_43")
model.do()
Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
-Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
+Common_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
-Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
+Common_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
-SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
+SketchLine_38 = Sketch_5.addLine(44, 3.464101615137744, 16.50000000000003, 51.09549882328188)
SketchLine_38.setName("SketchLine_41")
SketchLine_38.result().setName("SketchLine_41")
SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
SketchLine_39.setName("SketchLine_42")
SketchLine_39.result().setName("SketchLine_42")
SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
+SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_38.result(), 55)
+SketchConstraintLength_1.setName("SketchConstraintLength_6")
model.do()
Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False)
SketchLine_44.setName("SketchLine_53")
SketchLine_44.result().setName("SketchLine_53")
SketchLine_45 = Sketch_6.addLine(-4, 12.89999999999998, -4, 19.00000000002614)
+SketchLine_45.setName("SketchLine_45")
+SketchLine_45.result().setName("SketchLine_45")
SketchLine_45.setAuxiliary(True)
SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_75")
SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_51.result())
SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
-SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8)
-SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8)
+SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8, False)
+SketchConstraintDistance_20.setName("SketchConstraintDistance_20")
+SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8, False)
+SketchConstraintDistance_21.setName("SketchConstraintDistance_21")
SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41"))
SketchLine_52.setName("SketchLine_51")
SketchLine_52.result().setName("SketchLine_51")
-SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4)
-SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4)
+SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4, False)
+SketchConstraintDistance_22.setName("SketchConstraintDistance_22")
+SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4, False)
+SketchConstraintDistance_23.setName("SketchConstraintDistance_23")
SketchArc_11 = Sketch_6.addArc(-10, 13.00000000002614, -4.000000000000001, 13.00000000002612, -9.999999999999867, 19.00000000002614, False)
SketchArc_11.setName("SketchArc_12")
SketchArc_11.result().setName("SketchArc_12")
SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_93")
SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
-SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1)
-SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1)
+SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1, False)
+SketchConstraintDistance_24.setName("SketchConstraintDistance_24")
+SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1, False)
+SketchConstraintDistance_25.setName("SketchConstraintDistance_25")
SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
-SketchConstraintDistance_26 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1)
+SketchConstraintDistance_26 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1, False)
+SketchConstraintDistance_26.setName("SketchConstraintDistance_26")
SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
SketchLine_53.setName("SketchLine_56")
SketchLine_53.result().setName("SketchLine_56")
SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
model.do()
Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
-Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
-Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
-Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Common_1_1")], [model.selection("SOLID", "Common_2_1")])
+Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_7_1")])
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Fuse_2_1")], [model.selection("SOLID", "Common_3_1")])
Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1"))
SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
SketchLine_58.setName("SketchLine_68")
SketchLine_58.result().setName("SketchLine_68")
SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024)
+SketchLine_59.setName("SketchLine_59")
+SketchLine_59.result().setName("SketchLine_59")
SketchLine_59.setAuxiliary(True)
SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99")
SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1"))
SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100")
-SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -61.32702426187202, -9.237604307034024)
+SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60.00000000000001, -9.237604307034024)
+SketchLine_60.setName("SketchLine_60")
+SketchLine_60.result().setName("SketchLine_60")
SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_101")
-SketchLine_61 = Sketch_7.addLine(-61.32702426187202, -9.237604307034024, -61.32702426187202, -75.68652656141983)
+SketchLine_61 = Sketch_7.addLine(-60.00000000000001, -9.237604307034024, -60.00000000000001, -79.23760430703402)
+SketchLine_61.setName("SketchLine_61")
+SketchLine_61.result().setName("SketchLine_61")
SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_102")
-SketchLine_62 = Sketch_7.addLine(-61.32702426187202, -75.68652656141983, 60.38641987912783, -75.68652656141983)
+SketchLine_62 = Sketch_7.addLine(-60.00000000000001, -79.23760430703402, 60, -79.23760430703402)
+SketchLine_62.setName("SketchLine_62")
+SketchLine_62.result().setName("SketchLine_62")
SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_103")
-SketchLine_63 = Sketch_7.addLine(60.38641987912783, -75.68652656141983, 60.38641987912783, -9.237604307034024)
+SketchLine_63 = Sketch_7.addLine(60, -79.23760430703402, 60, -9.237604307034024)
+SketchLine_63.setName("SketchLine_63")
+SketchLine_63.result().setName("SketchLine_63")
SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_104")
-SketchLine_64 = Sketch_7.addLine(60.38641987912783, -9.237604307034024, 55, -9.237604307034024)
+SketchLine_64 = Sketch_7.addLine(60, -9.237604307034024, 55, -9.237604307034024)
+SketchLine_64.setName("SketchLine_64")
+SketchLine_64.result().setName("SketchLine_64")
SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_105")
SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
SketchArc_13.result().setName("SketchArc_14")
SketchArc_13.results()[1].setName("SketchArc_14_2")
SketchLine_65 = Sketch_7.addLine(45.00000000000001, -70, -55, -70)
+SketchLine_65.setName("SketchLine_65")
+SketchLine_65.result().setName("SketchLine_65")
SketchLine_65.setAuxiliary(True)
SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_108")
SketchCircle_5 = Sketch_7.addCircle(-43.99999999999999, -58.99999999999999, 5)
SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
-SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11)
-SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11)
-SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11)
-SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11)
+SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11, False)
+SketchConstraintDistance_27.setName("SketchConstraintDistance_27")
+SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11, False)
+SketchConstraintDistance_28.setName("SketchConstraintDistance_28")
+SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11, False)
+SketchConstraintDistance_29.setName("SketchConstraintDistance_29")
+SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11, False)
+SketchConstraintDistance_30.setName("SketchConstraintDistance_30")
SketchCircle_6 = Sketch_7.addCircle(44, -20.23760430703402, 5)
SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
-SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11)
+SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11, False)
+SketchConstraintDistance_31.setName("SketchConstraintDistance_31")
SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1"))
SketchLine_66.setName("SketchLine_69")
SketchLine_66.result().setName("SketchLine_69")
-SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11)
-SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11)
-SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11)
+SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11, False)
+SketchConstraintDistance_32.setName("SketchConstraintDistance_32")
+SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11, False)
+SketchConstraintDistance_33.setName("SketchConstraintDistance_33")
+SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11, False)
+SketchConstraintDistance_34.setName("SketchConstraintDistance_34")
+SketchConstraintLength_2 = Sketch_7.setLength(SketchLine_62.result(), 120)
+SketchConstraintLength_2.setName("SketchConstraintLength_7")
+SketchConstraintLength_3 = Sketch_7.setLength(SketchLine_61.result(), 70)
+SketchConstraintLength_3.setName("SketchConstraintLength_8")
+SketchConstraintDistanceHorizontal_1 = Sketch_7.setHorizontalDistance(SketchPoint_7.coordinates(), SketchLine_62.endPoint(), 5)
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
+ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")]
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3"))
SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
SketchLine_67.setName("SketchLine_79")
SketchLine_67.result().setName("SketchLine_79")
-SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_4&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3"))
+SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_4&Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_1"))
SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
SketchLine_68.setName("SketchLine_70")
SketchLine_68.result().setName("SketchLine_70")
SketchLine_68.setAuxiliary(True)
SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
-SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_4"))
SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
SketchLine_71.setName("SketchLine_81")
SketchLine_71.result().setName("SketchLine_81")
SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366588218793)
+SketchLine_72.setName("SketchLine_72")
+SketchLine_72.result().setName("SketchLine_72")
SketchLine_72.setAuxiliary(True)
SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
+SketchLine_73.setName("SketchLine_73")
+SketchLine_73.result().setName("SketchLine_73")
SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_126")
SketchLine_74 = Sketch_8.addLine(-83.25521566485324, -34.06366588218793, -83.25521566485298, 92.00148393088952)
+SketchLine_74.setName("SketchLine_74")
+SketchLine_74.result().setName("SketchLine_74")
SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_127")
SketchLine_75 = Sketch_8.addLine(-83.25521566485298, 92.00148393088952, 87.50975635635101, 92.00148393088952)
+SketchLine_75.setName("SketchLine_75")
+SketchLine_75.result().setName("SketchLine_75")
SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_128")
SketchLine_76 = Sketch_8.addLine(87.50975635635101, 92.00148393088952, 87.50975635635101, -34.06366588218793)
+SketchLine_76.setName("SketchLine_76")
+SketchLine_76.result().setName("SketchLine_76")
SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_129")
SketchLine_77 = Sketch_8.addLine(87.50975635635101, -34.06366588218793, 55, -34.06366588218793)
+SketchLine_77.setName("SketchLine_77")
+SketchLine_77.result().setName("SketchLine_77")
SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_130")
SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_133")
SketchLine_78 = Sketch_8.addLine(45, 76.69872981077805, -55, 76.69872981077803)
+SketchLine_78.setName("SketchLine_78")
+SketchLine_78.result().setName("SketchLine_78")
SketchLine_78.setAuxiliary(True)
SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_134")
SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
-SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25)
-SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11)
+SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25, False)
+SketchConstraintDistance_35.setName("SketchConstraintDistance_35")
+SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11, False)
+SketchConstraintDistance_36.setName("SketchConstraintDistance_36")
SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077805, 5)
SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
-SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11)
-SketchConstraintDistance_38 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60)
+SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11, False)
+SketchConstraintDistance_37.setName("SketchConstraintDistance_37")
+SketchConstraintDistance_38 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60, False)
+SketchConstraintDistance_38.setName("SketchConstraintDistance_38")
SketchArc_17 = Sketch_8.addArc(44, 16.69872981077803, 49, 16.69872981077806, 39, 16.69872981077804, True)
SketchArc_17.setName("SketchArc_19")
SketchArc_17.result().setName("SketchArc_19")
SketchArc_17.results()[1].setName("SketchArc_19_2")
SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
SketchConstraintRadius_21.setName("SketchConstraintRadius_22")
-SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60)
+SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60, False)
SketchConstraintDistance_39.setName("SketchConstraintDistance_41")
SketchArc_18 = Sketch_8.addArc(44, 51.69872981077805, 49, 51.69872981077805, 39.00000000000002, 51.69873025170988, False)
+SketchArc_18.setName("SketchArc_18")
+SketchArc_18.result().setName("SketchArc_18")
+SketchArc_18.results()[1].setName("SketchArc_18_2")
SketchLine_79 = Sketch_8.addLine(49, 16.69872981077806, 49, 51.69872981077805)
SketchLine_79.setName("SketchLine_82")
SketchLine_79.result().setName("SketchLine_82")
SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_147")
SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_148")
-SketchConstraintDistance_40 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11)
-SketchConstraintDistance_41 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25)
+SketchConstraintDistance_40 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11, False)
+SketchConstraintDistance_40.setName("SketchConstraintDistance_40")
+SketchConstraintDistance_41 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25, False)
SketchConstraintDistance_41.setName("SketchConstraintDistance_42")
-SketchConstraintDistance_42 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11)
+SketchConstraintDistance_42 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11, False)
+SketchConstraintDistance_42.setName("SketchConstraintDistance_44")
SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
SketchConstraintRadius_22.setName("SketchConstraintRadius_23")
-SketchConstraintLength_1 = Sketch_8.setLength(SketchLine_80.result(), 35.000000440932)
-SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_79.result(), 35)
-SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_75.result(), 170.764972021204)
-SketchConstraintLength_4 = Sketch_8.setLength(SketchLine_77.result(), 32.509756356351)
-SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_76.result(), 126.065149813077)
-SketchConstraintDistance_43 = Sketch_8.setDistance(SketchArc_18.endPoint(), SketchLine_69.result(), 24.999999559068)
-SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25)
+SketchConstraintLength_4 = Sketch_8.setLength(SketchLine_80.result(), 35.000000440932)
+SketchConstraintLength_4.setName("SketchConstraintLength_1")
+SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_79.result(), 35)
+SketchConstraintLength_5.setName("SketchConstraintLength_2")
+SketchConstraintLength_6 = Sketch_8.setLength(SketchLine_75.result(), 170.764972021204)
+SketchConstraintLength_6.setName("SketchConstraintLength_3")
+SketchConstraintLength_7 = Sketch_8.setLength(SketchLine_77.result(), 32.509756356351)
+SketchConstraintLength_7.setName("SketchConstraintLength_4")
+SketchConstraintLength_8 = Sketch_8.setLength(SketchLine_76.result(), 126.065149813077)
+SketchConstraintLength_8.setName("SketchConstraintLength_5")
+SketchConstraintDistance_43 = Sketch_8.setDistance(SketchArc_18.endPoint(), SketchLine_69.result(), 24.999999559068, False)
+SketchConstraintDistance_43.setName("SketchConstraintDistance_45")
+SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25, False)
+SketchConstraintDistance_44.setName("SketchConstraintDistance_46")
model.do()
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
-Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")]
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Fuse_3 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
model.do()
# Test reexecution after parameter change
Parameter_H.setValue(8)
model.do()
-model.testResultsVolumes(Boolean_7, [169755.330836739361984655261039734])
+model.testResultsVolumes(Fuse_3, [169754.898488585400627925992012024])
Parameter_H.setValue(6)
model.end()
from GeomAPI import GeomAPI_Shape
-model.testNbResults(Boolean_7, 1)
-model.testNbSubResults(Boolean_7, [0])
-model.testNbSubShapes(Boolean_7, GeomAPI_Shape.SOLID, [1])
-model.testNbSubShapes(Boolean_7, GeomAPI_Shape.FACE, [50])
-model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [266])
-model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [532])
-model.testResultsVolumes(Boolean_7, [156999.209584889642428606748580933])
+model.testNbResults(Fuse_3, 1)
+model.testNbSubResults(Fuse_3, [0])
+model.testNbSubShapes(Fuse_3, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_3, GeomAPI_Shape.FACE, [50])
+model.testNbSubShapes(Fuse_3, GeomAPI_Shape.EDGE, [266])
+model.testNbSubShapes(Fuse_3, GeomAPI_Shape.VERTEX, [532])
+model.testResultsVolumes(Fuse_3, [156999.209584889642428606748580933])
assert(model.checkPythonDump())
