model.begin()
partSet = model.moduleDocument()
Part_1 = model.addPart(partSet)
+Part_1.result().setColor(255, 85, 0)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(0, 0, 60, 0)
SketchLine_21.setName("SketchLine_23")
SketchLine_21.result().setName("SketchLine_23")
SketchLine_21.setAuxiliary(True)
-SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
+SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
SketchLine_22.setName("SketchLine_24")
SketchLine_22.result().setName("SketchLine_24")
SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_53")
SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_33.endPoint(), SketchLine_34.endPoint())
SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_54")
-SketchPoint_4 = Sketch_3.addPoint(16.50014787857639, -6)
+SketchPoint_4 = Sketch_3.addPoint(16.50014787857639, -5.999999999999999)
SketchPoint_4.setAuxiliary(True)
SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_34.result())
SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55")
SketchLine_46.result().setName("SketchLine_49")
SketchLine_45.setName("SketchLine_48")
SketchLine_45.result().setName("SketchLine_48")
+SketchLine_44.setName("SketchLine_46")
+SketchLine_44.result().setName("SketchLine_46")
SketchLine_43.setName("SketchLine_47")
SketchLine_43.result().setName("SketchLine_47")
SketchLine_42.setName("SketchLine_46")
model.do()
ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
-SketchLine_64 = Sketch_7.addLine(50.25000013028279, -4.499999999999999, 31.24999999998802, -4.499999999999997)
+SketchLine_64 = Sketch_7.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
SketchLine_64.setName("SketchLine_76")
SketchLine_64.result().setName("SketchLine_76")
-SketchLine_65 = Sketch_7.addLine(51.00000000000001, -6.750000215087569, 51.00000000000001, -5.24999997149696)
+SketchLine_65 = Sketch_7.addLine(51.00000000000001, -6.749999999999998, 51.00000000000001, -5.24999997149696)
SketchLine_65.setName("SketchLine_78")
SketchLine_65.result().setName("SketchLine_78")
-SketchLine_66 = Sketch_7.addLine(31, -4.750000022881151, 31.00000000000001, -7.249995609843254)
+SketchLine_66 = Sketch_7.addLine(31, -4.750000022881151, 31, -7.249999999972618)
SketchLine_66.setName("SketchLine_80")
SketchLine_66.result().setName("SketchLine_80")
-SketchLine_67 = Sketch_7.addLine(31.25000370007456, -7.499999999999999, 50.24999994039248, -7.5)
+SketchLine_67 = Sketch_7.addLine(31.25000000003855, -7.5, 50.24999994039248, -7.5)
SketchLine_67.setName("SketchLine_79")
SketchLine_67.result().setName("SketchLine_79")
-SketchLine_69 = Sketch_7.addLine(51, -4.5, 31, -4.5)
-SketchLine_69.setName("SketchLine_66")
-SketchLine_69.result().setName("SketchLine_66")
-SketchLine_69.setAuxiliary(True)
-SketchLine_68 = Sketch_7.addLine(51, -7.5, 51, -4.5)
-SketchLine_68.setName("SketchLine_69")
-SketchLine_68.result().setName("SketchLine_69")
+SketchLine_68 = Sketch_7.addLine(51, -4.5, 31, -4.5)
+SketchLine_68.setName("SketchLine_66")
+SketchLine_68.result().setName("SketchLine_66")
SketchLine_68.setAuxiliary(True)
-SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_68.endPoint(), SketchLine_69.startPoint())
+SketchLine_69 = Sketch_7.addLine(51, -7.5, 51, -4.5)
+SketchLine_69.setAuxiliary(True)
+SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_69.endPoint(), SketchLine_68.startPoint())
SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_78")
SketchLine_70 = Sketch_7.addLine(31, -4.5, 31, -7.5)
SketchLine_70.setName("SketchLine_67")
SketchLine_70.result().setName("SketchLine_67")
SketchLine_70.setAuxiliary(True)
-SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_69.endPoint(), SketchLine_70.startPoint())
+SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_79")
SketchLine_71 = Sketch_7.addLine(31, -7.5, 51, -7.5)
SketchLine_71.setName("SketchLine_68")
SketchLine_71.setAuxiliary(True)
SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_80")
-SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_71.endPoint(), SketchLine_68.startPoint())
+SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_71.endPoint(), SketchLine_69.startPoint())
SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_81")
-SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_69.result())
+SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_68.result())
SketchConstraintHorizontal_12.setName("SketchConstraintHorizontal_13")
SketchConstraintVertical_12 = Sketch_7.setVertical(SketchLine_70.result())
SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_71.result())
SketchConstraintHorizontal_13.setName("SketchConstraintHorizontal_14")
-SketchConstraintVertical_13 = Sketch_7.setVertical(SketchLine_68.result())
+SketchConstraintVertical_13 = Sketch_7.setVertical(SketchLine_69.result())
SketchLine_72 = Sketch_7.addLine(31, -7.5, 51, -4.5)
SketchLine_72.setName("SketchLine_70")
SketchLine_72.result().setName("SketchLine_70")
SketchConstraintCoincidence_79 = Sketch_7.setCoincident(SketchLine_71.startPoint(), SketchLine_72.startPoint())
SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_83")
SketchPoint_8 = Sketch_7.addPoint(51, -4.5)
-SketchConstraintCoincidence_80 = Sketch_7.setCoincident(SketchLine_69.startPoint(), SketchPoint_8.coordinates())
+SketchConstraintCoincidence_80 = Sketch_7.setCoincident(SketchLine_68.startPoint(), SketchPoint_8.coordinates())
SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_84")
-SketchConstraintCoincidence_81 = Sketch_7.setCoincident(SketchLine_68.endPoint(), SketchPoint_8.coordinates())
+SketchConstraintCoincidence_81 = Sketch_7.setCoincident(SketchLine_69.endPoint(), SketchPoint_8.coordinates())
SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_85")
SketchPoint_9 = Sketch_7.addPoint(41, -6)
SketchPoint_9.setAuxiliary(True)
SketchConstraintCoincidence_82 = Sketch_7.setCoincident(SketchPoint_9.coordinates(), SketchLine_72.result())
SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_86")
SketchConstraintMiddle_3 = Sketch_7.setMiddlePoint(SketchLine_72.result(), SketchPoint_9.coordinates())
-SketchPoint_10 = Sketch_7.addPoint(21.00014787857639, -6)
+SketchPoint_10 = Sketch_7.addPoint(21.00014787857639, -5.999999999999999)
SketchPoint_10.setAuxiliary(True)
SketchLine_73 = Sketch_7.addLine(21.00014787857639, -10.5, 21.00014787857639, -1.499999999999999)
SketchLine_73.setName("SketchLine_71")
SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_89")
SketchConstraintHorizontal_14 = Sketch_7.setHorizontal(SketchLine_74.result())
SketchConstraintHorizontal_14.setName("SketchConstraintHorizontal_15")
-SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_72.endPoint(), SketchLine_69.startPoint())
+SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_72.endPoint(), SketchLine_68.startPoint())
SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_90")
-SketchConstraintLength_12 = Sketch_7.setLength(SketchLine_68.result(), 3)
+SketchConstraintLength_12 = Sketch_7.setLength(SketchLine_69.result(), 3)
SketchConstraintLength_12.setName("SketchConstraintLength_13")
-SketchConstraintLength_13 = Sketch_7.setLength(SketchLine_69.result(), 20)
+SketchConstraintLength_13 = Sketch_7.setLength(SketchLine_68.result(), 20)
SketchConstraintLength_13.setName("SketchConstraintLength_14")
SketchPoint_11 = Sketch_7.addPoint(29, -10.5)
SketchConstraintDistance_13 = Sketch_7.setDistance(SketchPoint_11.coordinates(), SketchLine_70.result(), 2)
SketchConstraintRigid_6 = Sketch_7.setFixed(SketchPoint_11.result())
SketchConstraintRigid_6.setName("SketchConstraintRigid_15")
-SketchArc_14 = Sketch_7.addArc(50.24999999999999, -5.250000000000003, 51.00000000000001, -5.24999997149696, 50.25000013028279, -4.499999999999999, False)
+SketchArc_14 = Sketch_7.addArc(50.24999999999999, -5.250000000000003, 51.00000000000001, -5.24999997149696, 50.25000000000001, -4.5, False)
SketchLine_75 = Sketch_7.addLine(51, -7.5, 51.00000000000001, -5.24999997149696)
SketchLine_75.setName("SketchLine_74")
SketchLine_75.result().setName("SketchLine_74")
SketchLine_75.setAuxiliary(True)
SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_75.endPoint())
SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_91")
-SketchLine_76 = Sketch_7.addLine(50.25000013028279, -4.499999999999999, 31, -4.5)
+SketchLine_76 = Sketch_7.addLine(50.25000000000001, -4.5, 31, -4.5)
SketchLine_76.setName("SketchLine_73")
SketchLine_76.result().setName("SketchLine_73")
SketchLine_76.setAuxiliary(True)
SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_92")
SketchConstraintTangent_1 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_76.result())
SketchConstraintTangent_2 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_75.result())
-SketchConstraintCoincidence_89 = Sketch_7.setCoincident(SketchLine_69.endPoint(), SketchLine_76.endPoint())
+SketchConstraintCoincidence_89 = Sketch_7.setCoincident(SketchLine_68.endPoint(), SketchLine_76.endPoint())
SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_93")
-SketchConstraintCoincidence_90 = Sketch_7.setCoincident(SketchLine_68.startPoint(), SketchLine_75.startPoint())
+SketchConstraintCoincidence_90 = Sketch_7.setCoincident(SketchLine_69.startPoint(), SketchLine_75.startPoint())
SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
-SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_76.startPoint(), SketchLine_69.result())
+SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_76.startPoint(), SketchLine_68.result())
SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95")
-SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_75.endPoint(), SketchLine_68.result())
+SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_75.endPoint(), SketchLine_69.result())
SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96")
SketchArc_15 = Sketch_7.addArc(31.25000000000067, -4.750000000000669, 31.24999999998802, -4.499999999999997, 31, -4.750000022881151, False)
SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchArc_15.startPoint(), SketchLine_64.endPoint())
SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_101")
SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_64.endPoint(), SketchLine_76.result())
SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_102")
-SketchArc_16 = Sketch_7.addArc(50.25, -6.749999999999999, 50.24999994039248, -7.5, 51.00000000000001, -6.750000215087569, False)
+SketchArc_16 = Sketch_7.addArc(50.25, -6.749999999999999, 50.24999994039248, -7.5, 51.00000000000001, -6.749999999999998, False)
SketchLine_78 = Sketch_7.addLine(31, -7.5, 50.24999994039248, -7.5)
SketchLine_78.setName("SketchLine_77")
SketchLine_78.result().setName("SketchLine_77")
SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_107")
SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_75.result())
SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_108")
-SketchArc_17 = Sketch_7.addArc(31.25000000000003, -7.250000000000001, 31.00000000000001, -7.249995609843254, 31.25000370007456, -7.499999999999999, False)
+SketchArc_17 = Sketch_7.addArc(31.25000000000003, -7.250000000000001, 31, -7.249999999972618, 31.25000000003855, -7.5, False)
SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchArc_17.startPoint(), SketchLine_66.endPoint())
SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_109")
SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchArc_17.endPoint(), SketchLine_67.startPoint())
model.do()
ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
model.do()
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Sketch_11 = model.addSketch(Part_2_doc, model.defaultPlane("XOY"))
+SketchLine_107 = Sketch_11.addLine(0, 0, 60, 0)
+SketchPoint_25 = Sketch_11.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_174 = Sketch_11.setCoincident(SketchLine_107.startPoint(), SketchPoint_25.result())
+SketchLine_108 = Sketch_11.addLine(60, 0, 60, 1.5)
+SketchLine_108.setName("SketchLine_3")
+SketchLine_108.result().setName("SketchLine_3")
+SketchConstraintCoincidence_175 = Sketch_11.setCoincident(SketchLine_107.endPoint(), SketchLine_108.startPoint())
+SketchConstraintCoincidence_175.setName("SketchConstraintCoincidence_3")
+SketchLine_109 = Sketch_11.addLine(60, 1.5, 57, 1.5)
+SketchLine_109.setName("SketchLine_4")
+SketchLine_109.result().setName("SketchLine_4")
+SketchConstraintCoincidence_176 = Sketch_11.setCoincident(SketchLine_108.endPoint(), SketchLine_109.startPoint())
+SketchConstraintCoincidence_176.setName("SketchConstraintCoincidence_4")
+SketchLine_110 = Sketch_11.addLine(57, 1.5, 29, 7.5)
+SketchLine_110.setName("SketchLine_5")
+SketchLine_110.result().setName("SketchLine_5")
+SketchConstraintCoincidence_177 = Sketch_11.setCoincident(SketchLine_109.endPoint(), SketchLine_110.startPoint())
+SketchConstraintCoincidence_177.setName("SketchConstraintCoincidence_5")
+SketchLine_111 = Sketch_11.addLine(28, 7.5, 28, 8)
+SketchLine_111.setName("SketchLine_7")
+SketchLine_111.result().setName("SketchLine_7")
+SketchArc_24 = Sketch_11.addArc(25.00007393928819, 7.9789374678129, 28, 8, 22.00014787857639, 8, False)
+SketchLine_112 = Sketch_11.addLine(22.00014787857639, 8, 22.00014787857639, 7.5)
+SketchLine_112.setName("SketchLine_8")
+SketchLine_112.result().setName("SketchLine_8")
+SketchConstraintCoincidence_178 = Sketch_11.setCoincident(SketchArc_24.endPoint(), SketchLine_112.startPoint())
+SketchConstraintCoincidence_178.setName("SketchConstraintCoincidence_8")
+SketchLine_113 = Sketch_11.addLine(22.00014787857639, 7.5, 21.00014787857639, 7.5)
+SketchLine_113.setName("SketchLine_9")
+SketchLine_113.result().setName("SketchLine_9")
+SketchConstraintCoincidence_179 = Sketch_11.setCoincident(SketchLine_112.endPoint(), SketchLine_113.startPoint())
+SketchConstraintCoincidence_179.setName("SketchConstraintCoincidence_9")
+SketchLine_114 = Sketch_11.addLine(0, 0, 0, 3.499999999999999)
+SketchLine_114.setName("SketchLine_10")
+SketchLine_114.result().setName("SketchLine_10")
+SketchConstraintCoincidence_180 = Sketch_11.setCoincident(SketchLine_107.startPoint(), SketchLine_114.startPoint())
+SketchConstraintCoincidence_180.setName("SketchConstraintCoincidence_10")
+SketchConstraintCoincidence_181 = Sketch_11.setCoincident(SketchPoint_25.coordinates(), SketchLine_114.startPoint())
+SketchConstraintCoincidence_181.setName("SketchConstraintCoincidence_11")
+SketchLine_115 = Sketch_11.addLine(0, 3.499999999999999, 8, 5)
+SketchLine_115.setName("SketchLine_11")
+SketchLine_115.result().setName("SketchLine_11")
+SketchConstraintCoincidence_182 = Sketch_11.setCoincident(SketchLine_114.endPoint(), SketchLine_115.startPoint())
+SketchConstraintCoincidence_182.setName("SketchConstraintCoincidence_13")
+SketchLine_116 = Sketch_11.addLine(8, 5, 10.426976887961, 4.40018070612629)
+SketchLine_116.setName("SketchLine_12")
+SketchLine_116.result().setName("SketchLine_12")
+SketchConstraintCoincidence_183 = Sketch_11.setCoincident(SketchLine_115.endPoint(), SketchLine_116.startPoint())
+SketchConstraintCoincidence_183.setName("SketchConstraintCoincidence_14")
+SketchConstraintLength_18 = Sketch_11.setLength(SketchLine_107.result(), 60)
+SketchConstraintHorizontal_23 = Sketch_11.setHorizontal(SketchLine_107.result())
+SketchConstraintVertical_20 = Sketch_11.setVertical(SketchLine_108.result())
+SketchConstraintHorizontal_24 = Sketch_11.setHorizontal(SketchLine_109.result())
+SketchConstraintHorizontal_25 = Sketch_11.setHorizontal(SketchLine_113.result())
+SketchConstraintHorizontal_25.setName("SketchConstraintHorizontal_4")
+SketchConstraintVertical_21 = Sketch_11.setVertical(SketchLine_111.result())
+SketchConstraintVertical_22 = Sketch_11.setVertical(SketchLine_112.result())
+SketchConstraintCoincidence_184 = Sketch_11.setCoincident(SketchLine_111.endPoint(), SketchArc_24.startPoint())
+SketchConstraintCoincidence_184.setName("SketchConstraintCoincidence_15")
+SketchConstraintVertical_23 = Sketch_11.setVertical(SketchLine_114.result())
+SketchConstraintDistance_18 = Sketch_11.setDistance(SketchLine_114.endPoint(), SketchLine_107.result(), 3.5)
+SketchConstraintDistance_19 = Sketch_11.setDistance(SketchLine_115.endPoint(), SketchLine_114.result(), 8)
+SketchConstraintLength_19 = Sketch_11.setLength(SketchLine_116.result(), 2.5)
+SketchConstraintRadius_12 = Sketch_11.setRadius(SketchArc_24.results()[1], 3)
+SketchConstraintLength_20 = Sketch_11.setLength(SketchLine_112.result(), 0.5)
+SketchConstraintLength_21 = Sketch_11.setLength(SketchLine_113.result(), 1)
+SketchConstraintLength_22 = Sketch_11.setLength(SketchLine_111.result(), 0.5)
+SketchConstraintDistance_20 = Sketch_11.setDistance(SketchLine_112.endPoint(), SketchLine_107.result(), 7.5)
+SketchConstraintLength_23 = Sketch_11.setLength(SketchLine_109.result(), 3)
+SketchConstraintLength_23.setName("SketchConstraintLength_7")
+SketchConstraintLength_24 = Sketch_11.setLength(SketchLine_108.result(), 1.5)
+SketchConstraintLength_24.setName("SketchConstraintLength_8")
+SketchConstraintDistance_21 = Sketch_11.setDistance(SketchLine_115.endPoint(), SketchLine_107.result(), 5)
+SketchConstraintDistance_22 = Sketch_11.setDistance(SketchLine_111.startPoint(), SketchLine_107.result(), 7.5)
+SketchLine_117 = Sketch_11.addLine(12.81710695710752, 0, 12.81710695710752, 7.765286531476907)
+SketchLine_117.setName("SketchLine_13")
+SketchLine_117.result().setName("SketchLine_13")
+SketchLine_117.setAuxiliary(True)
+SketchConstraintCoincidence_185 = Sketch_11.setCoincident(SketchLine_117.startPoint(), SketchLine_107.result())
+SketchConstraintCoincidence_185.setName("SketchConstraintCoincidence_16")
+SketchConstraintVertical_24 = Sketch_11.setVertical(SketchLine_117.result())
+SketchPoint_26 = Sketch_11.addPoint(12.81710695710752, 3)
+SketchPoint_26.setAuxiliary(True)
+SketchConstraintCoincidence_186 = Sketch_11.setCoincident(SketchPoint_26.coordinates(), SketchLine_117.result())
+SketchConstraintCoincidence_186.setName("SketchConstraintCoincidence_17")
+SketchConstraintDistance_23 = Sketch_11.setDistance(SketchPoint_26.coordinates(), SketchLine_107.result(), 3)
+SketchLine_118 = Sketch_11.addLine(28, 7.5, 29, 7.5)
+SketchLine_118.setName("SketchLine_14")
+SketchLine_118.result().setName("SketchLine_14")
+SketchConstraintCoincidence_187 = Sketch_11.setCoincident(SketchLine_111.startPoint(), SketchLine_118.startPoint())
+SketchConstraintCoincidence_187.setName("SketchConstraintCoincidence_18")
+SketchConstraintCoincidence_188 = Sketch_11.setCoincident(SketchLine_110.endPoint(), SketchLine_118.endPoint())
+SketchConstraintCoincidence_188.setName("SketchConstraintCoincidence_19")
+SketchConstraintLength_25 = Sketch_11.setLength(SketchLine_118.result(), 1)
+SketchConstraintLength_25.setName("SketchConstraintLength_9")
+SketchArc_25 = Sketch_11.addArc(14.78851987160339, 9.105317068618911, 10.426976887961, 4.40018070612629, 21.00014787857639, 7.5, False)
+SketchConstraintCoincidence_189 = Sketch_11.setCoincident(SketchLine_116.endPoint(), SketchArc_25.startPoint())
+SketchConstraintCoincidence_189.setName("SketchConstraintCoincidence_20")
+SketchConstraintCoincidence_190 = Sketch_11.setCoincident(SketchLine_113.endPoint(), SketchArc_25.endPoint())
+SketchConstraintCoincidence_190.setName("SketchConstraintCoincidence_21")
+SketchConstraintCoincidence_191 = Sketch_11.setCoincident(SketchPoint_26.coordinates(), SketchArc_25.results()[1])
+SketchConstraintCoincidence_191.setName("SketchConstraintCoincidence_22")
+SketchConstraintHorizontal_26 = Sketch_11.setHorizontal(SketchLine_118.result())
+SketchConstraintHorizontal_26.setName("SketchConstraintHorizontal_9")
+SketchConstraintDistance_24 = Sketch_11.setDistance(SketchLine_111.startPoint(), SketchLine_108.result(), 32)
+SketchConstraintDistance_24.setName("SketchConstraintDistance_9")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r")], model.selection(), 12, 0)
+Sketch_12 = model.addSketch(Part_2_doc, model.selection("FACE", "PartSet/XOZ"))
+SketchArc_26 = Sketch_12.addArc(53.99996594708078, 6.000000000028422, 54, 12, 53.99994409538203, -3.231174267785264e-027, True)
+SketchLine_119 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/To_Face_1"))
+SketchLine_119.setName("SketchLine_15")
+SketchLine_119.result().setName("SketchLine_15")
+SketchConstraintCoincidence_192 = Sketch_12.setCoincident(SketchArc_26.startPoint(), SketchLine_119.result())
+SketchConstraintCoincidence_192.setName("SketchConstraintCoincidence_23")
+SketchLine_120 = Sketch_12.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"))
+SketchLine_120.setName("SketchLine_16")
+SketchLine_120.result().setName("SketchLine_16")
+SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result())
+SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_24")
+SketchConstraintRadius_13 = Sketch_12.setRadius(SketchArc_26.results()[1], 6)
+SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_121.setName("SketchLine_17")
+SketchLine_121.result().setName("SketchLine_17")
+SketchConstraintDistance_25 = Sketch_12.setDistance(SketchArc_26.startPoint(), SketchLine_121.result(), 6)
+SketchConstraintDistance_25.setName("SketchConstraintDistance_7")
+SketchLine_122 = Sketch_12.addLine(54, 12, 53.10174978726379, 13.92603605930655)
+SketchLine_122.setName("SketchLine_18")
+SketchLine_122.result().setName("SketchLine_18")
+SketchConstraintCoincidence_194 = Sketch_12.setCoincident(SketchArc_26.startPoint(), SketchLine_122.startPoint())
+SketchConstraintCoincidence_194.setName("SketchConstraintCoincidence_25")
+SketchLine_123 = Sketch_12.addLine(53.10174978726379, 13.92603605930655, 63.82610057919769, 13.82486293862793)
+SketchLine_123.setName("SketchLine_19")
+SketchLine_123.result().setName("SketchLine_19")
+SketchConstraintCoincidence_195 = Sketch_12.setCoincident(SketchLine_122.endPoint(), SketchLine_123.startPoint())
+SketchConstraintCoincidence_195.setName("SketchConstraintCoincidence_26")
+SketchLine_124 = Sketch_12.addLine(63.82610057919769, 13.82486293862793, 62.66260969139353, -3.07104821470189)
+SketchLine_124.setName("SketchLine_20")
+SketchLine_124.result().setName("SketchLine_20")
+SketchConstraintCoincidence_196 = Sketch_12.setCoincident(SketchLine_123.endPoint(), SketchLine_124.startPoint())
+SketchConstraintCoincidence_196.setName("SketchConstraintCoincidence_27")
+SketchLine_125 = Sketch_12.addLine(62.66260969139353, -3.07104821470189, 53.10174978726379, -2.868701973344648)
+SketchLine_125.setName("SketchLine_21")
+SketchLine_125.result().setName("SketchLine_21")
+SketchConstraintCoincidence_197 = Sketch_12.setCoincident(SketchLine_124.endPoint(), SketchLine_125.startPoint())
+SketchConstraintCoincidence_197.setName("SketchConstraintCoincidence_28")
+SketchLine_126 = Sketch_12.addLine(53.10174978726379, -2.868701973344648, 53.99994409538203, -3.231174267785264e-027)
+SketchLine_126.setName("SketchLine_22")
+SketchLine_126.result().setName("SketchLine_22")
+SketchConstraintCoincidence_198 = Sketch_12.setCoincident(SketchLine_125.endPoint(), SketchLine_126.startPoint())
+SketchConstraintCoincidence_198.setName("SketchConstraintCoincidence_29")
+SketchConstraintCoincidence_199 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_126.endPoint())
+SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30")
+model.do()
+ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001)
+SketchLine_127.setName("SketchLine_23")
+SketchLine_127.result().setName("SketchLine_23")
+SketchLine_127.setAuxiliary(True)
+SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_128.setName("SketchLine_24")
+SketchLine_128.result().setName("SketchLine_24")
+SketchConstraintCoincidence_200 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result())
+SketchConstraintCoincidence_200.setName("SketchConstraintCoincidence_31")
+SketchConstraintHorizontal_27 = Sketch_13.setHorizontal(SketchLine_127.result())
+SketchLine_129 = Sketch_13.addLine(28, -6, 63.78468475453244, -6.000000000000001)
+SketchLine_129.setName("SketchLine_25")
+SketchLine_129.result().setName("SketchLine_25")
+SketchLine_129.setAuxiliary(True)
+SketchConstraintCoincidence_201 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_129.startPoint())
+SketchConstraintCoincidence_201.setName("SketchConstraintCoincidence_32")
+SketchConstraintHorizontal_28 = Sketch_13.setHorizontal(SketchLine_129.result())
+SketchLine_130 = Sketch_13.addLine(60, -1.500000000000001, 29, -1.500000000000001)
+SketchLine_130.setName("SketchLine_26")
+SketchLine_130.result().setName("SketchLine_26")
+SketchLine_131 = Sketch_13.addLine(29, -1.500000000000001, 29, -10.5)
+SketchLine_131.setName("SketchLine_27")
+SketchLine_131.result().setName("SketchLine_27")
+SketchLine_132 = Sketch_13.addLine(29, -10.5, 60, -10.5)
+SketchLine_132.setName("SketchLine_28")
+SketchLine_132.result().setName("SketchLine_28")
+SketchLine_133 = Sketch_13.addLine(60, -10.5, 60, -1.500000000000001)
+SketchLine_133.setName("SketchLine_29")
+SketchLine_133.result().setName("SketchLine_29")
+SketchConstraintCoincidence_202 = Sketch_13.setCoincident(SketchLine_133.endPoint(), SketchLine_130.startPoint())
+SketchConstraintCoincidence_202.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_203 = Sketch_13.setCoincident(SketchLine_130.endPoint(), SketchLine_131.startPoint())
+SketchConstraintCoincidence_203.setName("SketchConstraintCoincidence_34")
+SketchConstraintCoincidence_204 = Sketch_13.setCoincident(SketchLine_131.endPoint(), SketchLine_132.startPoint())
+SketchConstraintCoincidence_204.setName("SketchConstraintCoincidence_35")
+SketchConstraintCoincidence_205 = Sketch_13.setCoincident(SketchLine_132.endPoint(), SketchLine_133.startPoint())
+SketchConstraintCoincidence_205.setName("SketchConstraintCoincidence_36")
+SketchConstraintHorizontal_29 = Sketch_13.setHorizontal(SketchLine_130.result())
+SketchConstraintVertical_25 = Sketch_13.setVertical(SketchLine_131.result())
+SketchConstraintHorizontal_30 = Sketch_13.setHorizontal(SketchLine_132.result())
+SketchConstraintVertical_26 = Sketch_13.setVertical(SketchLine_133.result())
+SketchLine_134 = Sketch_13.addLine(29, -10.5, 60, -1.500000000000001)
+SketchLine_134.setName("SketchLine_30")
+SketchLine_134.result().setName("SketchLine_30")
+SketchLine_134.setAuxiliary(True)
+SketchConstraintCoincidence_206 = Sketch_13.setCoincident(SketchLine_131.endPoint(), SketchLine_134.startPoint())
+SketchConstraintCoincidence_206.setName("SketchConstraintCoincidence_37")
+SketchConstraintCoincidence_207 = Sketch_13.setCoincident(SketchLine_132.startPoint(), SketchLine_134.startPoint())
+SketchConstraintCoincidence_207.setName("SketchConstraintCoincidence_38")
+SketchConstraintCoincidence_208 = Sketch_13.setCoincident(SketchLine_130.startPoint(), SketchLine_134.endPoint())
+SketchConstraintCoincidence_208.setName("SketchConstraintCoincidence_39")
+SketchConstraintCoincidence_209 = Sketch_13.setCoincident(SketchLine_133.endPoint(), SketchLine_134.endPoint())
+SketchConstraintCoincidence_209.setName("SketchConstraintCoincidence_40")
+SketchLine_135 = Sketch_13.addLine(29, -1.500000000000001, 60, -10.5)
+SketchLine_135.setName("SketchLine_31")
+SketchLine_135.result().setName("SketchLine_31")
+SketchLine_135.setAuxiliary(True)
+SketchConstraintCoincidence_210 = Sketch_13.setCoincident(SketchLine_130.endPoint(), SketchLine_135.startPoint())
+SketchConstraintCoincidence_210.setName("SketchConstraintCoincidence_41")
+SketchConstraintCoincidence_211 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_135.startPoint())
+SketchConstraintCoincidence_211.setName("SketchConstraintCoincidence_42")
+SketchConstraintCoincidence_212 = Sketch_13.setCoincident(SketchLine_132.endPoint(), SketchLine_135.endPoint())
+SketchConstraintCoincidence_212.setName("SketchConstraintCoincidence_43")
+SketchConstraintCoincidence_213 = Sketch_13.setCoincident(SketchLine_133.startPoint(), SketchLine_135.endPoint())
+SketchConstraintCoincidence_213.setName("SketchConstraintCoincidence_44")
+SketchPoint_27 = Sketch_13.addPoint(44.5, -6.000000000000001)
+SketchPoint_27.setAuxiliary(True)
+SketchConstraintCoincidence_214 = Sketch_13.setCoincident(SketchPoint_27.coordinates(), SketchLine_135.result())
+SketchConstraintCoincidence_214.setName("SketchConstraintCoincidence_45")
+SketchConstraintMiddle_9 = Sketch_13.setMiddlePoint(SketchPoint_27.coordinates(), SketchLine_135.result())
+SketchConstraintCoincidence_215 = Sketch_13.setCoincident(SketchPoint_27.coordinates(), SketchLine_129.result())
+SketchConstraintCoincidence_215.setName("SketchConstraintCoincidence_46")
+SketchConstraintDistance_26 = Sketch_13.setDistance(SketchLine_128.startPoint(), SketchLine_129.result(), 6)
+SketchConstraintDistance_26.setName("SketchConstraintDistance_8")
+SketchConstraintLength_26 = Sketch_13.setLength(SketchLine_133.result(), 9)
+SketchConstraintLength_26.setName("SketchConstraintLength_10")
+SketchLine_136 = Sketch_13.addLine(21.00014787857639, -1.499999999999999, 12.00014787857639, -1.499999999999999)
+SketchLine_136.setName("SketchLine_32")
+SketchLine_136.result().setName("SketchLine_32")
+SketchLine_137 = Sketch_13.addLine(12.00014787857639, -1.499999999999999, 12.00014787857639, -10.5)
+SketchLine_137.setName("SketchLine_33")
+SketchLine_137.result().setName("SketchLine_33")
+SketchLine_138 = Sketch_13.addLine(12.00014787857639, -10.5, 21.00014787857639, -10.5)
+SketchLine_138.setName("SketchLine_34")
+SketchLine_138.result().setName("SketchLine_34")
+SketchLine_139 = Sketch_13.addLine(21.00014787857639, -10.5, 21.00014787857639, -1.499999999999999)
+SketchLine_139.setName("SketchLine_35")
+SketchLine_139.result().setName("SketchLine_35")
+SketchConstraintCoincidence_216 = Sketch_13.setCoincident(SketchLine_139.endPoint(), SketchLine_136.startPoint())
+SketchConstraintCoincidence_216.setName("SketchConstraintCoincidence_47")
+SketchConstraintCoincidence_217 = Sketch_13.setCoincident(SketchLine_136.endPoint(), SketchLine_137.startPoint())
+SketchConstraintCoincidence_217.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_218 = Sketch_13.setCoincident(SketchLine_137.endPoint(), SketchLine_138.startPoint())
+SketchConstraintCoincidence_218.setName("SketchConstraintCoincidence_49")
+SketchConstraintCoincidence_219 = Sketch_13.setCoincident(SketchLine_138.endPoint(), SketchLine_139.startPoint())
+SketchConstraintCoincidence_219.setName("SketchConstraintCoincidence_50")
+SketchConstraintHorizontal_31 = Sketch_13.setHorizontal(SketchLine_136.result())
+SketchConstraintHorizontal_31.setName("SketchConstraintHorizontal_10")
+SketchConstraintVertical_27 = Sketch_13.setVertical(SketchLine_137.result())
+SketchConstraintHorizontal_32 = Sketch_13.setHorizontal(SketchLine_138.result())
+SketchConstraintHorizontal_32.setName("SketchConstraintHorizontal_11")
+SketchConstraintVertical_28 = Sketch_13.setVertical(SketchLine_139.result())
+SketchConstraintEqual_4 = Sketch_13.setEqual(SketchLine_131.result(), SketchLine_139.result())
+SketchLine_140 = Sketch_13.addLine(12.00014787857639, -10.5, 21.00014787857639, -1.499999999999999)
+SketchLine_140.setName("SketchLine_36")
+SketchLine_140.result().setName("SketchLine_36")
+SketchLine_140.setAuxiliary(True)
+SketchConstraintCoincidence_220 = Sketch_13.setCoincident(SketchLine_137.endPoint(), SketchLine_140.startPoint())
+SketchConstraintCoincidence_220.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_221 = Sketch_13.setCoincident(SketchLine_138.startPoint(), SketchLine_140.startPoint())
+SketchConstraintCoincidence_221.setName("SketchConstraintCoincidence_52")
+SketchConstraintCoincidence_222 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_140.endPoint())
+SketchConstraintCoincidence_222.setName("SketchConstraintCoincidence_53")
+SketchConstraintCoincidence_223 = Sketch_13.setCoincident(SketchLine_139.endPoint(), SketchLine_140.endPoint())
+SketchConstraintCoincidence_223.setName("SketchConstraintCoincidence_54")
+SketchPoint_28 = Sketch_13.addPoint(16.50014787857639, -5.999999999999999)
+SketchPoint_28.setAuxiliary(True)
+SketchConstraintCoincidence_224 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_140.result())
+SketchConstraintCoincidence_224.setName("SketchConstraintCoincidence_55")
+SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates())
+SketchConstraintCoincidence_225 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result())
+SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_56")
+SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_141.setName("SketchLine_37")
+SketchLine_141.result().setName("SketchLine_37")
+SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result())
+SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_57")
+SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31)
+SketchConstraintLength_27.setName("SketchConstraintLength_11")
+SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_142.setName("SketchLine_38")
+SketchLine_142.result().setName("SketchLine_38")
+SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result())
+SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58")
+SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result())
+model.do()
+ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
+SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
+SketchLine_143.setName("SketchLine_39")
+SketchLine_143.result().setName("SketchLine_39")
+SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_144.setName("SketchLine_40")
+SketchLine_144.result().setName("SketchLine_40")
+SketchConstraintCoincidence_228 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result())
+SketchConstraintCoincidence_228.setName("SketchConstraintCoincidence_59")
+SketchLine_145 = Sketch_14.addLine(1.55585595716119, 2.812450190483599, 2.324492722099671, 3.935842385393688)
+SketchLine_145.setName("SketchLine_41")
+SketchLine_145.result().setName("SketchLine_41")
+SketchConstraintCoincidence_229 = Sketch_14.setCoincident(SketchLine_143.endPoint(), SketchLine_145.startPoint())
+SketchConstraintCoincidence_229.setName("SketchConstraintCoincidence_60")
+SketchConstraintCoincidence_230 = Sketch_14.setCoincident(SketchLine_145.endPoint(), SketchLine_144.result())
+SketchConstraintCoincidence_230.setName("SketchConstraintCoincidence_61")
+SketchLine_146 = Sketch_14.addLine(2.324492722099671, 3.935842385393688, 0.4324637622511017, 3.581086955422081)
+SketchLine_146.setName("SketchLine_42")
+SketchLine_146.result().setName("SketchLine_42")
+SketchConstraintCoincidence_231 = Sketch_14.setCoincident(SketchLine_145.endPoint(), SketchLine_146.startPoint())
+SketchConstraintCoincidence_231.setName("SketchConstraintCoincidence_62")
+SketchConstraintCoincidence_232 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_146.endPoint())
+SketchConstraintCoincidence_232.setName("SketchConstraintCoincidence_63")
+SketchConstraintLength_28 = Sketch_14.setLength(SketchLine_146.result(), 1.925)
+SketchConstraintLength_28.setName("SketchConstraintLength_12")
+SketchConstraintEqual_6 = Sketch_14.setEqual(SketchLine_143.result(), SketchLine_145.result())
+SketchConstraintPerpendicular_2 = Sketch_14.setPerpendicular(SketchLine_143.result(), SketchLine_145.result())
+SketchConstraintDistance_27 = Sketch_14.setDistance(SketchLine_144.startPoint(), SketchLine_143.startPoint(), 0.44)
+SketchMultiTranslation_3_objects = [SketchLine_143.result(), SketchLine_146.result(), SketchLine_145.result()]
+SketchMultiTranslation_3 = Sketch_14.addTranslation(SketchMultiTranslation_3_objects, SketchLine_146.startPoint(), SketchLine_144.endPoint(), 4, True)
+[SketchLine_147, SketchLine_148, SketchLine_149, SketchLine_150, SketchLine_151, SketchLine_152, SketchLine_153, SketchLine_154, SketchLine_155] = SketchMultiTranslation_3.translated()
+SketchLine_155.setName("SketchLine_51")
+SketchLine_155.result().setName("SketchLine_51")
+SketchLine_154.setName("SketchLine_50")
+SketchLine_154.result().setName("SketchLine_50")
+SketchLine_153.setName("SketchLine_45")
+SketchLine_153.result().setName("SketchLine_45")
+SketchLine_152.setName("SketchLine_49")
+SketchLine_152.result().setName("SketchLine_49")
+SketchLine_151.setName("SketchLine_48")
+SketchLine_151.result().setName("SketchLine_48")
+SketchLine_150.setName("SketchLine_46")
+SketchLine_150.result().setName("SketchLine_46")
+SketchLine_149.setName("SketchLine_47")
+SketchLine_149.result().setName("SketchLine_47")
+SketchLine_148.setName("SketchLine_46")
+SketchLine_148.result().setName("SketchLine_46")
+SketchLine_147.setName("SketchLine_43")
+SketchLine_147.result().setName("SketchLine_43")
+model.do()
+ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
+SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
+SketchPoint_29 = Sketch_15.addPoint(22.00014787857639, -7.5)
+SketchConstraintRigid_14 = Sketch_15.setFixed(SketchPoint_29.result())
+SketchConstraintRigid_14.setName("SketchConstraintRigid_10")
+SketchConstraintCoincidence_233 = Sketch_15.setCoincident(SketchArc_27.startPoint(), SketchPoint_29.result())
+SketchConstraintCoincidence_233.setName("SketchConstraintCoincidence_64")
+SketchPoint_30 = Sketch_15.addPoint(28, -7.5)
+SketchConstraintRigid_15 = Sketch_15.setFixed(SketchPoint_30.result())
+SketchConstraintRigid_15.setName("SketchConstraintRigid_11")
+SketchConstraintCoincidence_234 = Sketch_15.setCoincident(SketchArc_27.endPoint(), SketchPoint_30.result())
+SketchConstraintCoincidence_234.setName("SketchConstraintCoincidence_65")
+SketchConstraintRadius_14 = Sketch_15.setRadius(SketchArc_27.results()[1], 3)
+SketchLine_156 = Sketch_15.addLine(22.00014787857639, -7.5, 22.00014787857639, -11.56094005408083)
+SketchLine_156.setName("SketchLine_52")
+SketchLine_156.result().setName("SketchLine_52")
+SketchConstraintCoincidence_235 = Sketch_15.setCoincident(SketchArc_27.startPoint(), SketchLine_156.startPoint())
+SketchConstraintCoincidence_235.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_236 = Sketch_15.setCoincident(SketchPoint_29.coordinates(), SketchLine_156.startPoint())
+SketchConstraintCoincidence_236.setName("SketchConstraintCoincidence_67")
+SketchLine_157 = Sketch_15.addLine(22.00014787857639, -11.56094005408083, 28, -11.56094005408083)
+SketchLine_157.setName("SketchLine_53")
+SketchLine_157.result().setName("SketchLine_53")
+SketchConstraintCoincidence_237 = Sketch_15.setCoincident(SketchLine_156.endPoint(), SketchLine_157.startPoint())
+SketchConstraintCoincidence_237.setName("SketchConstraintCoincidence_68")
+SketchLine_158 = Sketch_15.addLine(28, -11.56094005408083, 28, -7.5)
+SketchLine_158.setName("SketchLine_54")
+SketchLine_158.result().setName("SketchLine_54")
+SketchConstraintCoincidence_238 = Sketch_15.setCoincident(SketchLine_157.endPoint(), SketchLine_158.startPoint())
+SketchConstraintCoincidence_238.setName("SketchConstraintCoincidence_69")
+SketchConstraintCoincidence_239 = Sketch_15.setCoincident(SketchArc_27.endPoint(), SketchLine_158.endPoint())
+SketchConstraintCoincidence_239.setName("SketchConstraintCoincidence_70")
+SketchConstraintCoincidence_240 = Sketch_15.setCoincident(SketchPoint_30.coordinates(), SketchLine_158.endPoint())
+SketchConstraintCoincidence_240.setName("SketchConstraintCoincidence_71")
+SketchConstraintVertical_29 = Sketch_15.setVertical(SketchLine_156.result())
+SketchConstraintVertical_30 = Sketch_15.setVertical(SketchLine_158.result())
+SketchConstraintHorizontal_33 = Sketch_15.setHorizontal(SketchLine_157.result())
+SketchConstraintHorizontal_33.setName("SketchConstraintHorizontal_12")
+model.do()
+Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True)
+Plane_11 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 3, True)
+ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
+ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
+Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6"))
+SketchArc_28 = Sketch_16.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False)
+SketchLine_159 = Sketch_16.addLine(0, 0, 54, 0)
+SketchLine_159.setName("SketchLine_55")
+SketchLine_159.result().setName("SketchLine_55")
+SketchConstraintRigid_16 = Sketch_16.setFixed(SketchLine_159.result())
+SketchConstraintRigid_16.setName("SketchConstraintRigid_12")
+SketchConstraintCoincidence_241 = Sketch_16.setCoincident(SketchArc_28.center(), SketchLine_159.result())
+SketchConstraintCoincidence_241.setName("SketchConstraintCoincidence_72")
+SketchConstraintCoincidence_242 = Sketch_16.setCoincident(SketchArc_28.startPoint(), SketchLine_159.result())
+SketchConstraintCoincidence_242.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_243 = Sketch_16.setCoincident(SketchArc_28.endPoint(), SketchLine_159.result())
+SketchConstraintCoincidence_243.setName("SketchConstraintCoincidence_74")
+SketchLine_160 = Sketch_16.addLine(45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019)
+SketchLine_160.setName("SketchLine_56")
+SketchLine_160.result().setName("SketchLine_56")
+SketchConstraintCoincidence_244 = Sketch_16.setCoincident(SketchArc_28.startPoint(), SketchLine_160.startPoint())
+SketchConstraintCoincidence_244.setName("SketchConstraintCoincidence_75")
+SketchConstraintCoincidence_245 = Sketch_16.setCoincident(SketchArc_28.endPoint(), SketchLine_160.endPoint())
+SketchConstraintCoincidence_245.setName("SketchConstraintCoincidence_76")
+SketchConstraintRadius_15 = Sketch_16.setRadius(SketchArc_28.results()[1], 0.5)
+SketchLine_161 = Sketch_16.addLine(0, 0, 0, 3.499999999999999)
+SketchLine_161.setName("SketchLine_57")
+SketchLine_161.result().setName("SketchLine_57")
+SketchConstraintDistance_28 = Sketch_16.setDistance(SketchArc_28.center(), SketchLine_161.result(), 46)
+SketchConstraintRigid_17 = Sketch_16.setFixed(SketchLine_161.result())
+SketchConstraintRigid_17.setName("SketchConstraintRigid_13")
+SketchPoint_31 = Sketch_16.addPoint(58, 0)
+SketchConstraintCoincidence_246 = Sketch_16.setCoincident(SketchPoint_31.coordinates(), SketchLine_159.result())
+SketchConstraintCoincidence_246.setName("SketchConstraintCoincidence_77")
+SketchConstraintDistance_29 = Sketch_16.setDistance(SketchArc_28.center(), SketchPoint_31.coordinates(), 12)
+SketchMultiTranslation_4 = Sketch_16.addTranslation([SketchLine_160.result(), SketchArc_28.results()[1]], SketchArc_28.center(), SketchPoint_31.coordinates(), 9, True)
+[SketchLine_162, SketchLine_163, SketchLine_164, SketchLine_165, SketchLine_166, SketchLine_167, SketchLine_168, SketchLine_169, SketchArc_29, SketchArc_30, SketchArc_31, SketchArc_32, SketchArc_33, SketchArc_34, SketchArc_35, SketchArc_36] = SketchMultiTranslation_4.translated()
+SketchLine_169.setName("SketchLine_65")
+SketchLine_169.result().setName("SketchLine_65")
+SketchLine_168.setName("SketchLine_64")
+SketchLine_168.result().setName("SketchLine_64")
+SketchLine_167.setName("SketchLine_63")
+SketchLine_167.result().setName("SketchLine_63")
+SketchLine_166.setName("SketchLine_62")
+SketchLine_166.result().setName("SketchLine_62")
+SketchLine_165.setName("SketchLine_61")
+SketchLine_165.result().setName("SketchLine_61")
+SketchLine_164.setName("SketchLine_60")
+SketchLine_164.result().setName("SketchLine_60")
+SketchLine_163.setName("SketchLine_59")
+SketchLine_163.result().setName("SketchLine_59")
+SketchLine_162.setName("SketchLine_58")
+SketchLine_162.result().setName("SketchLine_58")
+model.do()
+ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
+Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
+SketchLine_170 = Sketch_17.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
+SketchLine_170.setName("SketchLine_76")
+SketchLine_170.result().setName("SketchLine_76")
+SketchLine_171 = Sketch_17.addLine(51.00000000000001, -6.749999999999998, 51.00000000000001, -5.24999997149696)
+SketchLine_171.setName("SketchLine_78")
+SketchLine_171.result().setName("SketchLine_78")
+SketchLine_172 = Sketch_17.addLine(31, -4.750000022881151, 31, -7.249999999972618)
+SketchLine_172.setName("SketchLine_80")
+SketchLine_172.result().setName("SketchLine_80")
+SketchLine_173 = Sketch_17.addLine(31.25000000003855, -7.5, 50.24999994039248, -7.5)
+SketchLine_173.setName("SketchLine_79")
+SketchLine_173.result().setName("SketchLine_79")
+SketchLine_174 = Sketch_17.addLine(51, -4.5, 31, -4.5)
+SketchLine_174.setName("SketchLine_66")
+SketchLine_174.result().setName("SketchLine_66")
+SketchLine_174.setAuxiliary(True)
+SketchLine_175 = Sketch_17.addLine(51, -7.5, 51, -4.5)
+SketchLine_175.setAuxiliary(True)
+SketchConstraintCoincidence_247 = Sketch_17.setCoincident(SketchLine_175.endPoint(), SketchLine_174.startPoint())
+SketchConstraintCoincidence_247.setName("SketchConstraintCoincidence_78")
+SketchLine_176 = Sketch_17.addLine(31, -4.5, 31, -7.5)
+SketchLine_176.setName("SketchLine_67")
+SketchLine_176.result().setName("SketchLine_67")
+SketchLine_176.setAuxiliary(True)
+SketchConstraintCoincidence_248 = Sketch_17.setCoincident(SketchLine_174.endPoint(), SketchLine_176.startPoint())
+SketchConstraintCoincidence_248.setName("SketchConstraintCoincidence_79")
+SketchLine_177 = Sketch_17.addLine(31, -7.5, 51, -7.5)
+SketchLine_177.setName("SketchLine_68")
+SketchLine_177.result().setName("SketchLine_68")
+SketchLine_177.setAuxiliary(True)
+SketchConstraintCoincidence_249 = Sketch_17.setCoincident(SketchLine_176.endPoint(), SketchLine_177.startPoint())
+SketchConstraintCoincidence_249.setName("SketchConstraintCoincidence_80")
+SketchConstraintCoincidence_250 = Sketch_17.setCoincident(SketchLine_177.endPoint(), SketchLine_175.startPoint())
+SketchConstraintCoincidence_250.setName("SketchConstraintCoincidence_81")
+SketchConstraintHorizontal_34 = Sketch_17.setHorizontal(SketchLine_174.result())
+SketchConstraintHorizontal_34.setName("SketchConstraintHorizontal_13")
+SketchConstraintVertical_31 = Sketch_17.setVertical(SketchLine_176.result())
+SketchConstraintHorizontal_35 = Sketch_17.setHorizontal(SketchLine_177.result())
+SketchConstraintHorizontal_35.setName("SketchConstraintHorizontal_14")
+SketchConstraintVertical_32 = Sketch_17.setVertical(SketchLine_175.result())
+SketchLine_178 = Sketch_17.addLine(31, -7.5, 51, -4.5)
+SketchLine_178.setName("SketchLine_70")
+SketchLine_178.result().setName("SketchLine_70")
+SketchLine_178.setAuxiliary(True)
+SketchConstraintCoincidence_251 = Sketch_17.setCoincident(SketchLine_176.endPoint(), SketchLine_178.startPoint())
+SketchConstraintCoincidence_251.setName("SketchConstraintCoincidence_82")
+SketchConstraintCoincidence_252 = Sketch_17.setCoincident(SketchLine_177.startPoint(), SketchLine_178.startPoint())
+SketchConstraintCoincidence_252.setName("SketchConstraintCoincidence_83")
+SketchPoint_32 = Sketch_17.addPoint(51, -4.5)
+SketchConstraintCoincidence_253 = Sketch_17.setCoincident(SketchLine_174.startPoint(), SketchPoint_32.coordinates())
+SketchConstraintCoincidence_253.setName("SketchConstraintCoincidence_84")
+SketchConstraintCoincidence_254 = Sketch_17.setCoincident(SketchLine_175.endPoint(), SketchPoint_32.coordinates())
+SketchConstraintCoincidence_254.setName("SketchConstraintCoincidence_85")
+SketchPoint_33 = Sketch_17.addPoint(41, -6)
+SketchPoint_33.setAuxiliary(True)
+SketchConstraintCoincidence_255 = Sketch_17.setCoincident(SketchPoint_33.coordinates(), SketchLine_178.result())
+SketchConstraintCoincidence_255.setName("SketchConstraintCoincidence_86")
+SketchConstraintMiddle_11 = Sketch_17.setMiddlePoint(SketchLine_178.result(), SketchPoint_33.coordinates())
+SketchPoint_34 = Sketch_17.addPoint(21.00014787857639, -5.999999999999999)
+SketchPoint_34.setAuxiliary(True)
+SketchLine_179 = Sketch_17.addLine(21.00014787857639, -10.5, 21.00014787857639, -1.499999999999999)
+SketchLine_179.setName("SketchLine_71")
+SketchLine_179.result().setName("SketchLine_71")
+SketchConstraintRigid_18 = Sketch_17.setFixed(SketchLine_179.result())
+SketchConstraintRigid_18.setName("SketchConstraintRigid_14")
+SketchConstraintCoincidence_256 = Sketch_17.setCoincident(SketchPoint_34.coordinates(), SketchLine_179.result())
+SketchConstraintCoincidence_256.setName("SketchConstraintCoincidence_87")
+SketchConstraintMiddle_12 = Sketch_17.setMiddlePoint(SketchPoint_34.coordinates(), SketchLine_179.result())
+SketchLine_180 = Sketch_17.addLine(21.00014787857639, -6, 41, -5.999999999999999)
+SketchLine_180.setName("SketchLine_72")
+SketchLine_180.result().setName("SketchLine_72")
+SketchLine_180.setAuxiliary(True)
+SketchConstraintCoincidence_257 = Sketch_17.setCoincident(SketchPoint_34.coordinates(), SketchLine_180.startPoint())
+SketchConstraintCoincidence_257.setName("SketchConstraintCoincidence_88")
+SketchConstraintCoincidence_258 = Sketch_17.setCoincident(SketchPoint_33.coordinates(), SketchLine_180.endPoint())
+SketchConstraintCoincidence_258.setName("SketchConstraintCoincidence_89")
+SketchConstraintHorizontal_36 = Sketch_17.setHorizontal(SketchLine_180.result())
+SketchConstraintHorizontal_36.setName("SketchConstraintHorizontal_15")
+SketchConstraintCoincidence_259 = Sketch_17.setCoincident(SketchLine_178.endPoint(), SketchLine_174.startPoint())
+SketchConstraintCoincidence_259.setName("SketchConstraintCoincidence_90")
+SketchConstraintLength_29 = Sketch_17.setLength(SketchLine_175.result(), 3)
+SketchConstraintLength_29.setName("SketchConstraintLength_13")
+SketchConstraintLength_30 = Sketch_17.setLength(SketchLine_174.result(), 20)
+SketchConstraintLength_30.setName("SketchConstraintLength_14")
+SketchPoint_35 = Sketch_17.addPoint(29, -10.5)
+SketchConstraintDistance_30 = Sketch_17.setDistance(SketchPoint_35.coordinates(), SketchLine_176.result(), 2)
+SketchConstraintRigid_19 = Sketch_17.setFixed(SketchPoint_35.result())
+SketchConstraintRigid_19.setName("SketchConstraintRigid_15")
+SketchArc_37 = Sketch_17.addArc(50.24999999999999, -5.250000000000003, 51.00000000000001, -5.24999997149696, 50.25000000000001, -4.5, False)
+SketchLine_181 = Sketch_17.addLine(51, -7.5, 51.00000000000001, -5.24999997149696)
+SketchLine_181.setName("SketchLine_74")
+SketchLine_181.result().setName("SketchLine_74")
+SketchLine_181.setAuxiliary(True)
+SketchConstraintCoincidence_260 = Sketch_17.setCoincident(SketchArc_37.startPoint(), SketchLine_181.endPoint())
+SketchConstraintCoincidence_260.setName("SketchConstraintCoincidence_91")
+SketchLine_182 = Sketch_17.addLine(50.25000000000001, -4.5, 31, -4.5)
+SketchLine_182.setName("SketchLine_73")
+SketchLine_182.result().setName("SketchLine_73")
+SketchLine_182.setAuxiliary(True)
+SketchConstraintCoincidence_261 = Sketch_17.setCoincident(SketchArc_37.endPoint(), SketchLine_182.startPoint())
+SketchConstraintCoincidence_261.setName("SketchConstraintCoincidence_92")
+SketchConstraintTangent_15 = Sketch_17.setTangent(SketchArc_37.results()[1], SketchLine_182.result())
+SketchConstraintTangent_16 = Sketch_17.setTangent(SketchArc_37.results()[1], SketchLine_181.result())
+SketchConstraintCoincidence_262 = Sketch_17.setCoincident(SketchLine_174.endPoint(), SketchLine_182.endPoint())
+SketchConstraintCoincidence_262.setName("SketchConstraintCoincidence_93")
+SketchConstraintCoincidence_263 = Sketch_17.setCoincident(SketchLine_175.startPoint(), SketchLine_181.startPoint())
+SketchConstraintCoincidence_263.setName("SketchConstraintCoincidence_94")
+SketchConstraintCoincidence_264 = Sketch_17.setCoincident(SketchLine_182.startPoint(), SketchLine_174.result())
+SketchConstraintCoincidence_264.setName("SketchConstraintCoincidence_95")
+SketchConstraintCoincidence_265 = Sketch_17.setCoincident(SketchLine_181.endPoint(), SketchLine_175.result())
+SketchConstraintCoincidence_265.setName("SketchConstraintCoincidence_96")
+SketchArc_38 = Sketch_17.addArc(31.25000000000067, -4.750000000000669, 31.24999999998802, -4.499999999999997, 31, -4.750000022881151, False)
+SketchConstraintCoincidence_266 = Sketch_17.setCoincident(SketchArc_38.startPoint(), SketchLine_170.endPoint())
+SketchConstraintCoincidence_266.setName("SketchConstraintCoincidence_97")
+SketchLine_183 = Sketch_17.addLine(31, -4.750000022881151, 31, -7.5)
+SketchLine_183.setName("SketchLine_75")
+SketchLine_183.result().setName("SketchLine_75")
+SketchLine_183.setAuxiliary(True)
+SketchConstraintCoincidence_267 = Sketch_17.setCoincident(SketchArc_38.endPoint(), SketchLine_183.startPoint())
+SketchConstraintCoincidence_267.setName("SketchConstraintCoincidence_98")
+SketchConstraintTangent_17 = Sketch_17.setTangent(SketchArc_38.results()[1], SketchLine_183.result())
+SketchConstraintTangent_18 = Sketch_17.setTangent(SketchArc_38.results()[1], SketchLine_170.result())
+SketchConstraintCoincidence_268 = Sketch_17.setCoincident(SketchLine_176.endPoint(), SketchLine_183.endPoint())
+SketchConstraintCoincidence_268.setName("SketchConstraintCoincidence_99")
+SketchConstraintCoincidence_269 = Sketch_17.setCoincident(SketchLine_182.startPoint(), SketchLine_170.startPoint())
+SketchConstraintCoincidence_269.setName("SketchConstraintCoincidence_100")
+SketchConstraintCoincidence_270 = Sketch_17.setCoincident(SketchLine_183.startPoint(), SketchLine_176.result())
+SketchConstraintCoincidence_270.setName("SketchConstraintCoincidence_101")
+SketchConstraintCoincidence_271 = Sketch_17.setCoincident(SketchLine_170.endPoint(), SketchLine_182.result())
+SketchConstraintCoincidence_271.setName("SketchConstraintCoincidence_102")
+SketchArc_39 = Sketch_17.addArc(50.25, -6.749999999999999, 50.24999994039248, -7.5, 51.00000000000001, -6.749999999999998, False)
+SketchLine_184 = Sketch_17.addLine(31, -7.5, 50.24999994039248, -7.5)
+SketchLine_184.setName("SketchLine_77")
+SketchLine_184.result().setName("SketchLine_77")
+SketchLine_184.setAuxiliary(True)
+SketchConstraintCoincidence_272 = Sketch_17.setCoincident(SketchArc_39.startPoint(), SketchLine_184.endPoint())
+SketchConstraintCoincidence_272.setName("SketchConstraintCoincidence_103")
+SketchConstraintCoincidence_273 = Sketch_17.setCoincident(SketchArc_39.endPoint(), SketchLine_171.startPoint())
+SketchConstraintCoincidence_273.setName("SketchConstraintCoincidence_104")
+SketchConstraintTangent_19 = Sketch_17.setTangent(SketchArc_39.results()[1], SketchLine_184.result())
+SketchConstraintTangent_20 = Sketch_17.setTangent(SketchArc_39.results()[1], SketchLine_171.result())
+SketchConstraintCoincidence_274 = Sketch_17.setCoincident(SketchLine_177.startPoint(), SketchLine_184.startPoint())
+SketchConstraintCoincidence_274.setName("SketchConstraintCoincidence_105")
+SketchConstraintCoincidence_275 = Sketch_17.setCoincident(SketchLine_181.endPoint(), SketchLine_171.endPoint())
+SketchConstraintCoincidence_275.setName("SketchConstraintCoincidence_106")
+SketchConstraintCoincidence_276 = Sketch_17.setCoincident(SketchLine_184.endPoint(), SketchLine_177.result())
+SketchConstraintCoincidence_276.setName("SketchConstraintCoincidence_107")
+SketchConstraintCoincidence_277 = Sketch_17.setCoincident(SketchLine_171.startPoint(), SketchLine_181.result())
+SketchConstraintCoincidence_277.setName("SketchConstraintCoincidence_108")
+SketchArc_40 = Sketch_17.addArc(31.25000000000003, -7.250000000000001, 31, -7.249999999972618, 31.25000000003855, -7.5, False)
+SketchConstraintCoincidence_278 = Sketch_17.setCoincident(SketchArc_40.startPoint(), SketchLine_172.endPoint())
+SketchConstraintCoincidence_278.setName("SketchConstraintCoincidence_109")
+SketchConstraintCoincidence_279 = Sketch_17.setCoincident(SketchArc_40.endPoint(), SketchLine_173.startPoint())
+SketchConstraintCoincidence_279.setName("SketchConstraintCoincidence_110")
+SketchConstraintTangent_21 = Sketch_17.setTangent(SketchArc_40.results()[1], SketchLine_173.result())
+SketchConstraintTangent_22 = Sketch_17.setTangent(SketchArc_40.results()[1], SketchLine_172.result())
+SketchConstraintCoincidence_280 = Sketch_17.setCoincident(SketchLine_184.endPoint(), SketchLine_173.endPoint())
+SketchConstraintCoincidence_280.setName("SketchConstraintCoincidence_111")
+SketchConstraintCoincidence_281 = Sketch_17.setCoincident(SketchLine_183.startPoint(), SketchLine_172.startPoint())
+SketchConstraintCoincidence_281.setName("SketchConstraintCoincidence_112")
+SketchConstraintCoincidence_282 = Sketch_17.setCoincident(SketchLine_173.startPoint(), SketchLine_184.result())
+SketchConstraintCoincidence_282.setName("SketchConstraintCoincidence_113")
+SketchConstraintCoincidence_283 = Sketch_17.setCoincident(SketchLine_172.endPoint(), SketchLine_183.result())
+SketchConstraintCoincidence_283.setName("SketchConstraintCoincidence_114")
+SketchConstraintRadius_16 = Sketch_17.setRadius(SketchArc_37.results()[1], 0.75)
+SketchConstraintRadius_17 = Sketch_17.setRadius(SketchArc_39.results()[1], 0.75)
+SketchConstraintRadius_18 = Sketch_17.setRadius(SketchArc_38.results()[1], 0.25)
+SketchConstraintRadius_19 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25)
+model.do()
+ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
+Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
+SketchPoint_36 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
+SketchPoint_37 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
+SketchConstraintRigid_20 = Sketch_18.setFixed(SketchPoint_37.result())
+SketchConstraintRigid_20.setName("SketchConstraintRigid_16")
+SketchConstraintCoincidence_284 = Sketch_18.setCoincident(SketchPoint_36.coordinates(), SketchPoint_37.result())
+SketchConstraintCoincidence_284.setName("SketchConstraintCoincidence_115")
+SketchPoint_38 = Sketch_18.addPoint(54, 12)
+SketchLine_185 = Sketch_18.addLine(54, 12, 53.99994409538203, -1.615587133892632e-027)
+SketchLine_185.setName("SketchLine_81")
+SketchLine_185.result().setName("SketchLine_81")
+SketchLine_185.setAuxiliary(True)
+SketchConstraintCoincidence_285 = Sketch_18.setCoincident(SketchPoint_38.coordinates(), SketchLine_185.startPoint())
+SketchConstraintCoincidence_285.setName("SketchConstraintCoincidence_116")
+SketchConstraintCoincidence_286 = Sketch_18.setCoincident(SketchPoint_36.coordinates(), SketchLine_185.endPoint())
+SketchConstraintCoincidence_286.setName("SketchConstraintCoincidence_117")
+SketchConstraintCoincidence_287 = Sketch_18.setCoincident(SketchPoint_37.coordinates(), SketchLine_185.endPoint())
+SketchConstraintCoincidence_287.setName("SketchConstraintCoincidence_118")
+SketchPoint_39 = Sketch_18.addPoint(53.99999534128184, 11.00000000001085)
+SketchConstraintCoincidence_288 = Sketch_18.setCoincident(SketchPoint_39.coordinates(), SketchLine_185.result())
+SketchConstraintCoincidence_288.setName("SketchConstraintCoincidence_119")
+SketchPoint_40 = Sketch_18.addPoint(53.99994875410019, 0.9999999999891482)
+SketchConstraintCoincidence_289 = Sketch_18.setCoincident(SketchPoint_40.coordinates(), SketchLine_185.result())
+SketchConstraintCoincidence_289.setName("SketchConstraintCoincidence_120")
+SketchConstraintDistance_31 = Sketch_18.setDistance(SketchPoint_36.coordinates(), SketchPoint_40.coordinates(), 1)
+SketchConstraintDistance_32 = Sketch_18.setDistance(SketchPoint_38.coordinates(), SketchPoint_39.coordinates(), 1)
+SketchPoint_41 = Sketch_18.addPoint(54, 12)
+SketchConstraintCoincidence_290 = Sketch_18.setCoincident(SketchPoint_38.coordinates(), SketchPoint_41.coordinates())
+SketchConstraintCoincidence_290.setName("SketchConstraintCoincidence_121")
+SketchConstraintRigid_21 = Sketch_18.setFixed(SketchPoint_41.result())
+SketchConstraintRigid_21.setName("SketchConstraintRigid_17")
+SketchLine_186 = Sketch_18.addLine(53.99999534128184, 11.00000000001085, 43.53696016024325, 11.00000000001085)
+SketchLine_186.setName("SketchLine_82")
+SketchLine_186.result().setName("SketchLine_82")
+SketchConstraintCoincidence_291 = Sketch_18.setCoincident(SketchPoint_39.coordinates(), SketchLine_186.startPoint())
+SketchConstraintCoincidence_291.setName("SketchConstraintCoincidence_122")
+SketchLine_187 = Sketch_18.addLine(43.53696016024325, 11.00000000001085, 43.56530536601203, 13.47539228785809)
+SketchLine_187.setName("SketchLine_83")
+SketchLine_187.result().setName("SketchLine_83")
+SketchConstraintCoincidence_292 = Sketch_18.setCoincident(SketchLine_186.endPoint(), SketchLine_187.startPoint())
+SketchConstraintCoincidence_292.setName("SketchConstraintCoincidence_123")
+SketchLine_188 = Sketch_18.addLine(43.56530536601203, 13.47539228785809, 63.09515214070713, 13.47539228785809)
+SketchLine_188.setName("SketchLine_84")
+SketchLine_188.result().setName("SketchLine_84")
+SketchConstraintCoincidence_293 = Sketch_18.setCoincident(SketchLine_187.endPoint(), SketchLine_188.startPoint())
+SketchConstraintCoincidence_293.setName("SketchConstraintCoincidence_124")
+SketchLine_189 = Sketch_18.addLine(63.09515214070713, 13.47539228785809, 63.12349734647592, -1.774328415749978)
+SketchLine_189.setName("SketchLine_85")
+SketchLine_189.result().setName("SketchLine_85")
+SketchConstraintCoincidence_294 = Sketch_18.setCoincident(SketchLine_188.endPoint(), SketchLine_189.startPoint())
+SketchConstraintCoincidence_294.setName("SketchConstraintCoincidence_125")
+SketchLine_190 = Sketch_18.addLine(63.12349734647592, -1.774328415749978, 43.82041221793113, -1.802673621518767)
+SketchLine_190.setName("SketchLine_86")
+SketchLine_190.result().setName("SketchLine_86")
+SketchConstraintCoincidence_295 = Sketch_18.setCoincident(SketchLine_189.endPoint(), SketchLine_190.startPoint())
+SketchConstraintCoincidence_295.setName("SketchConstraintCoincidence_126")
+SketchLine_191 = Sketch_18.addLine(43.82041221793113, -1.802673621518767, 43.79206701216234, 0.9999999999891482)
+SketchLine_191.setName("SketchLine_87")
+SketchLine_191.result().setName("SketchLine_87")
+SketchConstraintCoincidence_296 = Sketch_18.setCoincident(SketchLine_190.endPoint(), SketchLine_191.startPoint())
+SketchConstraintCoincidence_296.setName("SketchConstraintCoincidence_127")
+SketchLine_192 = Sketch_18.addLine(53.99994875410019, 0.9999999999891482, 43.79206701216234, 0.9999999999891482)
+SketchLine_192.setName("SketchLine_88")
+SketchLine_192.result().setName("SketchLine_88")
+SketchConstraintCoincidence_297 = Sketch_18.setCoincident(SketchPoint_40.coordinates(), SketchLine_192.startPoint())
+SketchConstraintCoincidence_297.setName("SketchConstraintCoincidence_128")
+SketchConstraintHorizontal_37 = Sketch_18.setHorizontal(SketchLine_192.result())
+SketchConstraintHorizontal_37.setName("SketchConstraintHorizontal_16")
+SketchConstraintHorizontal_38 = Sketch_18.setHorizontal(SketchLine_186.result())
+SketchConstraintHorizontal_38.setName("SketchConstraintHorizontal_17")
+SketchConstraintCoincidence_298 = Sketch_18.setCoincident(SketchLine_191.endPoint(), SketchLine_192.endPoint())
+SketchConstraintCoincidence_298.setName("SketchConstraintCoincidence_129")
+SketchArc_41 = Sketch_18.addArc(53.99995774377268, 6.000000000066637, 53.99999534128184, 11.00000000001085, 53.99994875410019, 0.9999999999891482, True)
+SketchConstraintCoincidence_299 = Sketch_18.setCoincident(SketchPoint_39.coordinates(), SketchArc_41.startPoint())
+SketchConstraintCoincidence_299.setName("SketchConstraintCoincidence_130")
+SketchConstraintCoincidence_300 = Sketch_18.setCoincident(SketchLine_186.startPoint(), SketchArc_41.startPoint())
+SketchConstraintCoincidence_300.setName("SketchConstraintCoincidence_131")
+SketchConstraintCoincidence_301 = Sketch_18.setCoincident(SketchPoint_40.coordinates(), SketchArc_41.endPoint())
+SketchConstraintCoincidence_301.setName("SketchConstraintCoincidence_132")
+SketchConstraintCoincidence_302 = Sketch_18.setCoincident(SketchLine_192.startPoint(), SketchArc_41.endPoint())
+SketchConstraintCoincidence_302.setName("SketchConstraintCoincidence_133")
+SketchConstraintRadius_20 = Sketch_18.setRadius(SketchArc_41.results()[1], 5)
+SketchLine_193 = Sketch_18.addLine(43.50261344273609, 8.249999999999998, 43.50261344273609, 3.749999999999998)
+SketchLine_193.setName("SketchLine_90")
+SketchLine_193.result().setName("SketchLine_90")
+SketchConstraintVertical_33 = Sketch_18.setVertical(SketchLine_193.result())
+SketchConstraintLength_31 = Sketch_18.setLength(SketchLine_193.result(), 4.5)
+SketchConstraintLength_31.setName("SketchConstraintLength_15")
+SketchPoint_42 = Sketch_18.addPoint(43.50261344273609, 5.999999999999998)
+SketchConstraintMiddle_13 = Sketch_18.setMiddlePoint(SketchPoint_42.coordinates(), SketchLine_193.result())
+SketchPoint_43 = Sketch_18.addPoint(0, 6)
+SketchPoint_43.setAuxiliary(True)
+SketchLine_194 = Sketch_18.addLine(0, 0, 0, 12)
+SketchLine_194.setName("SketchLine_94")
+SketchLine_194.result().setName("SketchLine_94")
+SketchConstraintRigid_22 = Sketch_18.setFixed(SketchLine_194.result())
+SketchConstraintRigid_22.setName("SketchConstraintRigid_19")
+SketchConstraintCoincidence_303 = Sketch_18.setCoincident(SketchPoint_43.coordinates(), SketchLine_194.result())
+SketchConstraintCoincidence_303.setName("SketchConstraintCoincidence_139")
+SketchConstraintMiddle_14 = Sketch_18.setMiddlePoint(SketchLine_194.result(), SketchPoint_43.coordinates())
+SketchLine_195 = Sketch_18.addLine(0, 6, 68.8619738308997, 6)
+SketchLine_195.setName("SketchLine_95")
+SketchLine_195.result().setName("SketchLine_95")
+SketchLine_195.setAuxiliary(True)
+SketchConstraintCoincidence_304 = Sketch_18.setCoincident(SketchPoint_43.coordinates(), SketchLine_195.startPoint())
+SketchConstraintCoincidence_304.setName("SketchConstraintCoincidence_140")
+SketchConstraintHorizontal_39 = Sketch_18.setHorizontal(SketchLine_195.result())
+SketchConstraintHorizontal_39.setName("SketchConstraintHorizontal_20")
+SketchPoint_44 = Sketch_18.addPoint(48.00130672136804, 6)
+SketchConstraintCoincidence_305 = Sketch_18.setCoincident(SketchPoint_44.coordinates(), SketchLine_195.result())
+SketchConstraintCoincidence_305.setName("SketchConstraintCoincidence_146")
+SketchLine_196 = Sketch_18.addLine(43.50261344273609, 8.249999999999998, 51.26978940411676, 8.249999999999998)
+SketchLine_196.setName("SketchLine_92")
+SketchLine_196.result().setName("SketchLine_92")
+SketchConstraintCoincidence_306 = Sketch_18.setCoincident(SketchLine_193.startPoint(), SketchLine_196.startPoint())
+SketchConstraintCoincidence_306.setName("SketchConstraintCoincidence_135")
+SketchLine_197 = Sketch_18.addLine(51.26978940411676, 8.249999999999998, 51.26978940411676, 3.749999999999998)
+SketchLine_197.setName("SketchLine_97")
+SketchLine_197.result().setName("SketchLine_97")
+SketchConstraintCoincidence_307 = Sketch_18.setCoincident(SketchLine_196.endPoint(), SketchLine_197.startPoint())
+SketchConstraintCoincidence_307.setName("SketchConstraintCoincidence_136")
+SketchLine_198 = Sketch_18.addLine(51.26978940411676, 3.749999999999998, 43.50261344273609, 3.749999999999998)
+SketchLine_198.setName("SketchLine_98")
+SketchLine_198.result().setName("SketchLine_98")
+SketchConstraintCoincidence_308 = Sketch_18.setCoincident(SketchLine_197.endPoint(), SketchLine_198.startPoint())
+SketchConstraintCoincidence_308.setName("SketchConstraintCoincidence_137")
+SketchConstraintCoincidence_309 = Sketch_18.setCoincident(SketchLine_193.endPoint(), SketchLine_198.endPoint())
+SketchConstraintCoincidence_309.setName("SketchConstraintCoincidence_138")
+SketchConstraintHorizontal_40 = Sketch_18.setHorizontal(SketchLine_198.result())
+SketchConstraintHorizontal_41 = Sketch_18.setHorizontal(SketchLine_196.result())
+SketchConstraintVertical_34 = Sketch_18.setVertical(SketchLine_197.result())
+SketchLine_199 = Sketch_18.addLine(43.50261344273609, 3.749999999999998, 51.26978940411676, 8.249999999999998)
+SketchLine_199.setAuxiliary(True)
+SketchConstraintCoincidence_310 = Sketch_18.setCoincident(SketchLine_193.endPoint(), SketchLine_199.startPoint())
+SketchConstraintCoincidence_310.setName("SketchConstraintCoincidence_141")
+SketchConstraintCoincidence_311 = Sketch_18.setCoincident(SketchLine_198.endPoint(), SketchLine_199.startPoint())
+SketchConstraintCoincidence_311.setName("SketchConstraintCoincidence_142")
+SketchConstraintCoincidence_312 = Sketch_18.setCoincident(SketchLine_197.startPoint(), SketchLine_199.endPoint())
+SketchConstraintCoincidence_312.setName("SketchConstraintCoincidence_143")
+SketchPoint_45 = Sketch_18.addPoint(47.38620142342643, 5.999999999999998)
+SketchPoint_45.setAuxiliary(True)
+SketchConstraintCoincidence_313 = Sketch_18.setCoincident(SketchPoint_45.coordinates(), SketchLine_199.result())
+SketchConstraintCoincidence_313.setName("SketchConstraintCoincidence_144")
+SketchConstraintMiddle_15 = Sketch_18.setMiddlePoint(SketchPoint_45.coordinates(), SketchLine_199.result())
+SketchConstraintCoincidence_314 = Sketch_18.setCoincident(SketchPoint_45.coordinates(), SketchLine_195.result())
+SketchConstraintCoincidence_314.setName("SketchConstraintCoincidence_145")
+model.do()
+ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
+Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
+SketchLine_200 = Sketch_19.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
+SketchLine_200.setName("SketchLine_107")
+SketchLine_200.result().setName("SketchLine_107")
+SketchLine_201 = Sketch_19.addLine(29, 5, 21.00014787857639, 5)
+SketchLine_201.setName("SketchLine_96")
+SketchLine_201.result().setName("SketchLine_96")
+SketchLine_201.setAuxiliary(True)
+SketchArc_42 = Sketch_19.addArc(25.00007393928819, 8.000098583186649, 21.53790262696343, 4.392693725936027, 28.46224525161297, 4.392693725936026, False)
+SketchArc_42.setName("SketchArc_22")
+SketchArc_42.result().setName("SketchArc_22")
+SketchArc_42.results()[1].setName("SketchArc_22_2")
+SketchLine_202 = Sketch_19.addLine(21.00014787857639, 0, 29, 0)
+SketchLine_202.setName("SketchLine_100")
+SketchLine_202.result().setName("SketchLine_100")
+SketchLine_203 = Sketch_19.addLine(29, 0, 29, 4.163450069699049)
+SketchLine_203.setName("SketchLine_108")
+SketchLine_203.result().setName("SketchLine_108")
+SketchLine_204 = Sketch_19.addLine(29, 0, 29, 5)
+SketchLine_204.setName("SketchLine_101")
+SketchLine_204.result().setName("SketchLine_101")
+SketchLine_204.setAuxiliary(True)
+SketchConstraintCoincidence_315 = Sketch_19.setCoincident(SketchLine_204.endPoint(), SketchLine_201.startPoint())
+SketchConstraintCoincidence_315.setName("SketchConstraintCoincidence_147")
+SketchLine_205 = Sketch_19.addLine(21.00014787857639, 5, 21.00014787857639, 0)
+SketchLine_205.setAuxiliary(True)
+SketchConstraintCoincidence_316 = Sketch_19.setCoincident(SketchLine_201.endPoint(), SketchLine_205.startPoint())
+SketchConstraintCoincidence_316.setName("SketchConstraintCoincidence_148")
+SketchConstraintCoincidence_317 = Sketch_19.setCoincident(SketchLine_205.endPoint(), SketchLine_202.startPoint())
+SketchConstraintCoincidence_317.setName("SketchConstraintCoincidence_149")
+SketchConstraintCoincidence_318 = Sketch_19.setCoincident(SketchLine_202.endPoint(), SketchLine_204.startPoint())
+SketchConstraintCoincidence_318.setName("SketchConstraintCoincidence_150")
+SketchConstraintHorizontal_42 = Sketch_19.setHorizontal(SketchLine_201.result())
+SketchConstraintHorizontal_42.setName("SketchConstraintHorizontal_21")
+SketchConstraintVertical_35 = Sketch_19.setVertical(SketchLine_205.result())
+SketchConstraintHorizontal_43 = Sketch_19.setHorizontal(SketchLine_202.result())
+SketchConstraintHorizontal_43.setName("SketchConstraintHorizontal_22")
+SketchConstraintVertical_36 = Sketch_19.setVertical(SketchLine_204.result())
+SketchPoint_46 = Sketch_19.addPoint(21.00014787857639, 7.5)
+SketchConstraintCoincidence_319 = Sketch_19.setCoincident(SketchLine_205.result(), SketchPoint_46.coordinates())
+SketchConstraintCoincidence_319.setName("SketchConstraintCoincidence_151")
+SketchConstraintRigid_23 = Sketch_19.setFixed(SketchPoint_46.result())
+SketchConstraintRigid_23.setName("SketchConstraintRigid_18")
+SketchPoint_47 = Sketch_19.addPoint(29, 7.5)
+SketchConstraintCoincidence_320 = Sketch_19.setCoincident(SketchLine_204.result(), SketchPoint_47.coordinates())
+SketchConstraintCoincidence_320.setName("SketchConstraintCoincidence_152")
+SketchConstraintRigid_24 = Sketch_19.setFixed(SketchPoint_47.result())
+SketchConstraintRigid_24.setName("SketchConstraintRigid_20")
+SketchConstraintLength_32 = Sketch_19.setLength(SketchLine_205.result(), 5)
+SketchConstraintLength_32.setName("SketchConstraintLength_16")
+SketchLine_206 = Sketch_19.addLine(0, 0, 45.49999999999999, 0)
+SketchLine_206.setName("SketchLine_102")
+SketchLine_206.result().setName("SketchLine_102")
+SketchConstraintCoincidence_321 = Sketch_19.setCoincident(SketchLine_205.endPoint(), SketchLine_206.result())
+SketchConstraintCoincidence_321.setName("SketchConstraintCoincidence_153")
+SketchConstraintRigid_25 = Sketch_19.setFixed(SketchLine_206.result())
+SketchConstraintRigid_25.setName("SketchConstraintRigid_21")
+SketchArc_43 = Sketch_19.addArc(25.00007393928819, 8.000098583186649, 21.00014787857639, 5, 29, 5, False)
+SketchArc_43.setName("SketchArc_19")
+SketchArc_43.result().setName("SketchArc_19")
+SketchArc_43.results()[1].setName("SketchArc_19_2")
+SketchArc_43.setAuxiliary(True)
+SketchConstraintCoincidence_322 = Sketch_19.setCoincident(SketchLine_201.endPoint(), SketchArc_43.startPoint())
+SketchConstraintCoincidence_322.setName("SketchConstraintCoincidence_154")
+SketchConstraintCoincidence_323 = Sketch_19.setCoincident(SketchLine_205.startPoint(), SketchArc_43.startPoint())
+SketchConstraintCoincidence_323.setName("SketchConstraintCoincidence_155")
+SketchConstraintCoincidence_324 = Sketch_19.setCoincident(SketchLine_201.startPoint(), SketchArc_43.endPoint())
+SketchConstraintCoincidence_324.setName("SketchConstraintCoincidence_156")
+SketchConstraintCoincidence_325 = Sketch_19.setCoincident(SketchLine_204.endPoint(), SketchArc_43.endPoint())
+SketchConstraintCoincidence_325.setName("SketchConstraintCoincidence_157")
+SketchConstraintRadius_21 = Sketch_19.setRadius(SketchArc_43.results()[1], 5)
+SketchLine_207 = Sketch_19.addLine(1, 0, 1, 1.8)
+SketchLine_207.setName("SketchLine_103")
+SketchLine_207.result().setName("SketchLine_103")
+SketchConstraintCoincidence_326 = Sketch_19.setCoincident(SketchLine_207.startPoint(), SketchLine_206.result())
+SketchConstraintCoincidence_326.setName("SketchConstraintCoincidence_158")
+SketchLine_208 = Sketch_19.addLine(1, 1.8, 8, 3.389761862250954)
+SketchLine_208.setName("SketchLine_104")
+SketchLine_208.result().setName("SketchLine_104")
+SketchConstraintCoincidence_327 = Sketch_19.setCoincident(SketchLine_207.endPoint(), SketchLine_208.startPoint())
+SketchConstraintCoincidence_327.setName("SketchConstraintCoincidence_159")
+SketchLine_209 = Sketch_19.addLine(8, 3.389761862250954, 8, 0)
+SketchLine_209.setName("SketchLine_105")
+SketchLine_209.result().setName("SketchLine_105")
+SketchConstraintCoincidence_328 = Sketch_19.setCoincident(SketchLine_208.endPoint(), SketchLine_209.startPoint())
+SketchConstraintCoincidence_328.setName("SketchConstraintCoincidence_160")
+SketchLine_210 = Sketch_19.addLine(8, 0, 1, 0)
+SketchLine_210.setName("SketchLine_106")
+SketchLine_210.result().setName("SketchLine_106")
+SketchConstraintCoincidence_329 = Sketch_19.setCoincident(SketchLine_209.endPoint(), SketchLine_210.startPoint())
+SketchConstraintCoincidence_329.setName("SketchConstraintCoincidence_161")
+SketchConstraintCoincidence_330 = Sketch_19.setCoincident(SketchLine_207.startPoint(), SketchLine_210.endPoint())
+SketchConstraintCoincidence_330.setName("SketchConstraintCoincidence_162")
+SketchConstraintCoincidence_331 = Sketch_19.setCoincident(SketchLine_210.startPoint(), SketchLine_206.result())
+SketchConstraintCoincidence_331.setName("SketchConstraintCoincidence_163")
+SketchConstraintVertical_37 = Sketch_19.setVertical(SketchLine_209.result())
+SketchConstraintVertical_38 = Sketch_19.setVertical(SketchLine_207.result())
+SketchConstraintLength_33 = Sketch_19.setLength(SketchLine_210.result(), 7)
+SketchConstraintLength_33.setName("SketchConstraintLength_17")
+SketchConstraintDistance_33 = Sketch_19.setDistance(SketchLine_207.result(), SketchLine_206.startPoint(), 1)
+SketchConstraintLength_34 = Sketch_19.setLength(SketchLine_207.result(), 1.8)
+SketchConstraintLength_34.setName("SketchConstraintLength_18")
+SketchArc_44 = Sketch_19.addArc(21.3178882838101, 4.163450069699051, 21.53790262696343, 4.392693725936027, 21.00014787857639, 4.163450069699051, False)
+SketchArc_45 = Sketch_19.addArc(25.00007393928819, 8.000098583186649, 21.53790262696343, 4.392693725936027, 29, 5, False)
+SketchArc_45.setName("SketchArc_20")
+SketchArc_45.result().setName("SketchArc_20")
+SketchArc_45.results()[1].setName("SketchArc_20_2")
+SketchArc_45.setAuxiliary(True)
+SketchConstraintCoincidence_332 = Sketch_19.setCoincident(SketchArc_44.startPoint(), SketchArc_45.startPoint())
+SketchConstraintCoincidence_332.setName("SketchConstraintCoincidence_164")
+SketchConstraintCoincidence_333 = Sketch_19.setCoincident(SketchArc_44.endPoint(), SketchLine_200.startPoint())
+SketchConstraintCoincidence_333.setName("SketchConstraintCoincidence_165")
+SketchConstraintTangent_23 = Sketch_19.setTangent(SketchArc_44.results()[1], SketchLine_200.result())
+SketchConstraintTangent_24 = Sketch_19.setTangent(SketchArc_44.results()[1], SketchArc_45.results()[1])
+SketchConstraintCoincidence_334 = Sketch_19.setCoincident(SketchLine_205.endPoint(), SketchLine_200.endPoint())
+SketchConstraintCoincidence_334.setName("SketchConstraintCoincidence_166")
+SketchConstraintCoincidence_335 = Sketch_19.setCoincident(SketchArc_43.endPoint(), SketchArc_45.endPoint())
+SketchConstraintCoincidence_335.setName("SketchConstraintCoincidence_167")
+SketchConstraintTangent_25 = Sketch_19.setTangent(SketchArc_43.results()[1], SketchArc_45.results()[1])
+SketchConstraintCoincidence_336 = Sketch_19.setCoincident(SketchLine_200.startPoint(), SketchLine_205.result())
+SketchConstraintCoincidence_336.setName("SketchConstraintCoincidence_168")
+SketchConstraintCoincidence_337 = Sketch_19.setCoincident(SketchArc_45.startPoint(), SketchArc_43.results()[1])
+SketchConstraintCoincidence_337.setName("SketchConstraintCoincidence_169")
+SketchArc_46 = Sketch_19.addArc(28.68225959476629, 4.163450069699049, 29, 4.163450069699049, 28.46224525161297, 4.392693725936026, False)
+SketchConstraintCoincidence_338 = Sketch_19.setCoincident(SketchArc_46.startPoint(), SketchLine_203.endPoint())
+SketchConstraintCoincidence_338.setName("SketchConstraintCoincidence_170")
+SketchConstraintCoincidence_339 = Sketch_19.setCoincident(SketchArc_46.endPoint(), SketchArc_42.endPoint())
+SketchConstraintCoincidence_339.setName("SketchConstraintCoincidence_171")
+SketchConstraintTangent_26 = Sketch_19.setTangent(SketchArc_46.results()[1], SketchArc_42.results()[1])
+SketchConstraintTangent_27 = Sketch_19.setTangent(SketchArc_46.results()[1], SketchLine_203.result())
+SketchConstraintCoincidence_340 = Sketch_19.setCoincident(SketchArc_45.startPoint(), SketchArc_42.startPoint())
+SketchConstraintCoincidence_340.setName("SketchConstraintCoincidence_172")
+SketchConstraintCoincidence_341 = Sketch_19.setCoincident(SketchLine_204.startPoint(), SketchLine_203.startPoint())
+SketchConstraintCoincidence_341.setName("SketchConstraintCoincidence_173")
+SketchConstraintTangent_28 = Sketch_19.setTangent(SketchArc_45.results()[1], SketchArc_42.results()[1])
+SketchConstraintCoincidence_342 = Sketch_19.setCoincident(SketchArc_42.endPoint(), SketchArc_45.results()[1])
+SketchConstraintCoincidence_342.setName("SketchConstraintCoincidence_174")
+SketchConstraintCoincidence_343 = Sketch_19.setCoincident(SketchLine_203.endPoint(), SketchLine_204.result())
+SketchConstraintCoincidence_343.setName("SketchConstraintCoincidence_175")
+model.do()
+Plane_12 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, False)
+Plane_13 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, True)
+ExtrusionCut_17 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")])
+Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5"))
+SketchCircle_2 = Sketch_20.addCircle(12, 6, 1)
+SketchConstraintRadius_22 = Sketch_20.setRadius(SketchCircle_2.results()[1], 1)
+SketchPoint_48 = Sketch_20.addPoint(0, 6)
+SketchPoint_48.setAuxiliary(True)
+SketchLine_211 = Sketch_20.addLine(0, 0, 0, 12)
+SketchLine_211.setName("SketchLine_109")
+SketchLine_211.result().setName("SketchLine_109")
+SketchConstraintRigid_26 = Sketch_20.setFixed(SketchLine_211.result())
+SketchConstraintRigid_26.setName("SketchConstraintRigid_22")
+SketchConstraintCoincidence_344 = Sketch_20.setCoincident(SketchPoint_48.coordinates(), SketchLine_211.result())
+SketchConstraintCoincidence_344.setName("SketchConstraintCoincidence_176")
+SketchConstraintMiddle_16 = Sketch_20.setMiddlePoint(SketchLine_211.result(), SketchPoint_48.coordinates())
+SketchLine_212 = Sketch_20.addLine(0, 6, 17.31036191565843, 6)
+SketchLine_212.setName("SketchLine_110")
+SketchLine_212.result().setName("SketchLine_110")
+SketchLine_212.setAuxiliary(True)
+SketchConstraintCoincidence_345 = Sketch_20.setCoincident(SketchPoint_48.coordinates(), SketchLine_212.startPoint())
+SketchConstraintCoincidence_345.setName("SketchConstraintCoincidence_177")
+SketchConstraintHorizontal_44 = Sketch_20.setHorizontal(SketchLine_212.result())
+SketchConstraintHorizontal_44.setName("SketchConstraintHorizontal_23")
+SketchConstraintCoincidence_346 = Sketch_20.setCoincident(SketchCircle_2.center(), SketchLine_212.result())
+SketchConstraintCoincidence_346.setName("SketchConstraintCoincidence_178")
+SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), SketchCircle_2.center(), 12)
+model.do()
+ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
+model.do()
+Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_57"), 180)
+Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True)
+Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/ExtrusionCut_5_1/Modfied_8&ExtrusionCut_8_1/Modfied_3"), 7)
+Rotation_2.result().setColor(255, 85, 0)
model.end()
from GeomAPI import GeomAPI_Shape
-model.testNbResults(ExtrusionCut_9, 1)
-model.testNbSubResults(ExtrusionCut_9, [0])
-model.testNbSubShapes(ExtrusionCut_9, GeomAPI_Shape.SOLID, [1])
-model.testNbSubShapes(ExtrusionCut_9, GeomAPI_Shape.FACE, [172])
-model.testNbSubShapes(ExtrusionCut_9, GeomAPI_Shape.EDGE, [804])
-model.testNbSubShapes(ExtrusionCut_9, GeomAPI_Shape.VERTEX, [1608])
-model.testResultsVolumes(ExtrusionCut_9, [1876.328652945095427639898844063])
+model.testNbResults(Part_1, 1)
+model.testNbSubResults(Part_1, [0])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [172])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [804])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [1608])
+model.testResultsVolumes(Part_1, [1876.328652945015164732467383146])
+
+model.testNbResults(Rotation_2, 1)
+model.testNbSubResults(Rotation_2, [0])
+model.testNbSubShapes(Rotation_2, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Rotation_2, GeomAPI_Shape.FACE, [172])
+model.testNbSubShapes(Rotation_2, GeomAPI_Shape.EDGE, [804])
+model.testNbSubShapes(Rotation_2, GeomAPI_Shape.VERTEX, [1608])
+model.testResultsVolumes(Rotation_2, [1876.328652945015846853493712842])
-assert(model.checkPythonDump)
+assert(model.checkPythonDump())
