A unit-test for the issue #18887 : Fatal error after save and dump or dump and save

diff --git a/src/ConnectorAPI/Test/Test18887.py b/src/ConnectorAPI/Test/Test18887.py
new file mode 100644 (file)
index 0000000..4a3f88a
--- /dev/null
+++ b/src/ConnectorAPI/Test/Test18887.py
@@ -0,0 +1,90 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+import sys
+import salome
+
+salome.salome_init()
+import salome_notebook
+###
+### SHAPER component
+###
+from SketchAPI import *
+from salome.shaper import model
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(30, 0, 0, 0)
+SketchLine_1.setAuxiliary(True)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
+SketchLine_2 = Sketch_1.addLine(0, 0, 0, 26)
+SketchLine_2.setAuxiliary(True)
+SketchLine_3 = Sketch_1.addLine(0, 26, 30, 26)
+SketchLine_3.setAuxiliary(True)
+SketchLine_4 = Sketch_1.addLine(30, 26, 30, 0)
+SketchLine_4.setAuxiliary(True)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 30)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 26)
+SketchBSplinePeriodic_1 = Sketch_1.addSpline(poles = [(5, 26), (-1.697788041973476e-26, 13), (5, 0), (30, 13)], periodic = True)
+[SketchPoint_2, SketchPoint_3, SketchPoint_4, SketchPoint_5] = SketchBSplinePeriodic_1.controlPoles(auxiliary = [0, 1, 2, 3])
+[SketchLine_5, SketchLine_6, SketchLine_7, SketchLine_8] = SketchBSplinePeriodic_1.controlPolygon(auxiliary = [0, 1, 2, 3])
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_6).startPoint(), SketchLine_2.result())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_3.result())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_7).endPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchAPI_Line(SketchLine_7).endPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_6).endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
+SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchAPI_Line(SketchLine_6).startPoint(), SketchLine_2.result())
+SketchLine_9 = Sketch_1.addLine(5, 26, 5, 0)
+SketchLine_9.setAuxiliary(True)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_4).coordinates(), SketchLine_9.endPoint())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_6).endPoint(), SketchLine_2.result(), 5, True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchBSplinePeriodic_1f")], model.selection(), 1, 0)
+model.end()
+
+###
+### SHAPERSTUDY component
+###
+model.publishToShaperStudy()
+
+# from the issue scenario: make fillet and two publications (caused by dump and save)
+model.begin()
+Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchBSplinePeriodic_1][Extrusion_1_1/To_Face]")], 0.4999, keepSubResults = True)
+model.end()
+
+model.publishToShaperStudy()
+model.publishToShaperStudy()

diff --git a/src/ConnectorAPI/Test/tests.set b/src/ConnectorAPI/Test/tests.set
index be23a5a85583f459f3a2b2cac302b9692448f6a5..6e74d99607d72c6d9ea515c333efb76381e57c4e 100644 (file)
--- a/src/ConnectorAPI/Test/tests.set
+++ b/src/ConnectorAPI/Test/tests.set
@@ -25,4 +25,5 @@ SET(TEST_NAMES
   TestExportToGEOMWholeFeature
   Test2882
   Test17917
+  Test18887
 )