--- /dev/null
+# Copyright (C) 2020 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAPI import *
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+model.addParameter(Part_1_doc, "size_x", "150")
+ParamSize = model.addParameter(Part_1_doc, "size_y", "180")
+model.addParameter(Part_1_doc, "size_z", "5")
+model.addParameter(Part_1_doc, "chamfer", "0.8")
+model.addParameter(Part_1_doc, "thickness", "4")
+
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, -145, 0, 30, 50, 22.70509831248424, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_1.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.center(), SketchAPI_Line(SketchLine_1).startPoint(), "size_y-35", True)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "size_y-5")
+SketchArc_2 = Sketch_1.addArc(47.42857142857143, 14.08026468498505, 50, 22.70509831248424, 56.4024789026646, 13.39544014803082, True)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 9)
+SketchArc_3 = Sketch_1.addArc(66.37348720721259, 12.63452399585945, 56.4024789026646, 13.39544014803082, 65.54400934016748, 2.668985050670266, False)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchArc_3.startPoint())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_3.results()[1])
+SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_3.results()[1], 10)
+SketchArc_4 = Sketch_1.addArc(64.79747925982687, -6.3, 65.54400934016748, 2.668985050670266, 73.72335126899428, -5.147260273972602, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchArc_4.startPoint())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_4.results()[1])
+SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_4.results()[1], 9)
+SketchArc_5 = Sketch_1.addArc(-80, -25, 73.72335126899428, -5.147260273972602, 28.47740289468357, -135.7142857142857, True)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_5.startPoint())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_5.results()[1])
+SketchConstraintRadius_5 = Sketch_1.setRadius(SketchArc_5.results()[1], "size_x+5")
+SketchArc_6 = Sketch_1.addArc(32.67652816802617, -140, 28.47740289468357, -135.7142857142857, 36.96224245374191, -135.8008747266572, False)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchArc_6.startPoint())
+SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchArc_6.results()[1])
+SketchConstraintRadius_6 = Sketch_1.setRadius(SketchArc_6.results()[1], 6)
+SketchArc_7 = Sketch_1.addArc(38.39081388227633, -134.4011663021575, 36.96224245374191, -135.8008747266572, 39.81938531083141, -133.0014578776889, True)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchArc_7.startPoint())
+SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_6.results()[1], SketchArc_7.results()[1])
+SketchConstraintRadius_7 = Sketch_1.setRadius(SketchArc_7.results()[1], "thickness/2")
+SketchArc_8 = Sketch_1.addArc(32.67652816802617, -140, 39.81938531083141, -133.0014578776889, 25.67798604578851, -132.8571428571429, True)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchArc_8.startPoint())
+SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_7.results()[1], SketchArc_8.results()[1])
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_8.center(), SketchArc_6.center())
+SketchArc_9 = Sketch_1.addArc(-80, -25, 25.67798604578851, -132.8571428571429, 69.75629704269767, -5.659589041095889, False)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchArc_9.startPoint())
+SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_8.results()[1], SketchArc_9.results()[1])
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_9.center(), SketchArc_5.center())
+SketchArc_10 = Sketch_1.addArc(64.79747925982687, -6.3, 69.75629704269767, -5.659589041095889, 65.21221819334943, -1.317230527405396, False)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchArc_10.startPoint())
+SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_9.results()[1], SketchArc_10.results()[1])
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_4.center(), SketchArc_10.center())
+SketchArc_11 = Sketch_1.addArc(66.37348720721259, 12.63452399585945, 65.21221819334943, -1.317230527405396, 52.41407558084543, 13.69980660889937, True)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_10.endPoint(), SketchArc_11.startPoint())
+SketchConstraintTangent_10 = Sketch_1.setTangent(SketchArc_10.results()[1], SketchArc_11.results()[1])
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_11.center(), SketchArc_3.center())
+SketchArc_12 = Sketch_1.addArc(47.42857142857143, 14.08026468498505, 52.41407558084543, 13.69980660889937, 52.31556879671711, 15.13726833859206, False)
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_11.endPoint(), SketchArc_12.startPoint())
+SketchConstraintTangent_11 = Sketch_1.setTangent(SketchArc_11.results()[1], SketchArc_12.results()[1])
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_12.center(), SketchArc_2.center())
+SketchArc_13 = Sketch_1.addArc(51.92460900726545, 15.0527080463035, 52.31556879671711, 15.13726833859206, 51.52598744945789, 15.0858871609853, False)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_12.endPoint(), SketchArc_13.startPoint())
+SketchConstraintTangent_12 = Sketch_1.setTangent(SketchArc_12.results()[1], SketchArc_13.results()[1])
+SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_13.results()[1], 0.4)
+SketchLine_2 = Sketch_1.addLine(51.52598744945789, 15.0858871609853, 50.80630122186367, 6.439410365943716)
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_13.endPoint(), SketchLine_2.startPoint())
+SketchConstraintTangent_13 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_13.results()[1])
+SketchArc_14 = Sketch_1.addArc(47.81663953830692, 6.68825372605725, 50.80630122186367, 6.439410365943716, 47.56779617819338, 3.698592042500495, True)
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_14.startPoint())
+SketchConstraintTangent_14 = Sketch_1.setTangent(SketchLine_2.result(), SketchArc_14.results()[1])
+SketchConstraintRadius_9 = Sketch_1.setRadius(SketchArc_14.results()[1], 3)
+SketchArc_15 = Sketch_1.addArc(47.73369175160241, 5.691699831538332, 47.56779617819338, 3.698592042500495, 46.66684983267853, 4, True)
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_14.endPoint(), SketchArc_15.startPoint())
+SketchConstraintTangent_15 = Sketch_1.setTangent(SketchArc_14.results()[1], SketchArc_15.results()[1])
+SketchConstraintRadius_10 = Sketch_1.setRadius(SketchArc_15.results()[1], 2)
+SketchArc_16 = Sketch_1.addArc(0, -70, 46.66684983267853, 4, 0, 17.48596957973185, False)
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchArc_15.endPoint(), SketchArc_16.startPoint())
+SketchConstraintTangent_16 = Sketch_1.setTangent(SketchArc_15.results()[1], SketchArc_16.results()[1])
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchArc_16.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchArc_16.center(), SketchLine_1.result())
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_16.center(), SketchAPI_Line(SketchLine_1).startPoint(), "size_y/2-20", True)
+SketchLine_3 = Sketch_1.addLine(64.79747925982687, -6.3, 66.37348720721259, 12.63452399585945)
+SketchLine_3.setAuxiliary(True)
+SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_3.endPoint())
+SketchLine_4 = Sketch_1.addLine(47.73369175160241, 5.691699831538332, 47.81663953830692, 6.68825372605725)
+SketchLine_4.setAuxiliary(True)
+SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_15.center(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchArc_14.center(), SketchLine_4.endPoint())
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_3.result())
+SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_4.result())
+SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchArc_5.center(), SketchAPI_Line(SketchLine_1).startPoint(), "size_x/2+5")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_5.center(), SketchAPI_Line(SketchLine_1).startPoint(), 25)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchArc_11.endPoint(), SketchLine_2.result(), 1, True)
+SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchArc_8.center(), SketchAPI_Line(SketchLine_1).startPoint(), "size_y-40")
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchLine_1.result(), 50, True)
+SketchLine_5 = Sketch_1.addLine(28.47740289468357, -135.7142857142857, 32.67652816802617, -140)
+SketchLine_5.setAuxiliary(True)
+SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_6.center(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(32.67652816802617, -140, 36.96224245374191, -135.8008747266572)
+SketchLine_6.setAuxiliary(True)
+SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchArc_6.center(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_6.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_5.result(), SketchLine_6.result())
+SketchConstraintDistanceVertical_3 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchArc_16.startPoint(), 4)
+SketchConstraintDistanceVertical_4 = Sketch_1.setVerticalDistance(SketchArc_4.center(), SketchAPI_Line(SketchLine_1).startPoint(), 6.3)
+SketchConstraintMirror_1_objects = [SketchArc_1.results()[1], SketchArc_2.results()[1], SketchArc_3.results()[1], SketchArc_4.results()[1], SketchArc_5.results()[1], SketchArc_6.results()[1], SketchArc_7.results()[1], SketchArc_8.results()[1], SketchArc_9.results()[1], SketchArc_10.results()[1], SketchArc_11.results()[1], SketchArc_12.results()[1], SketchArc_13.results()[1], SketchLine_2.result(), SketchArc_14.results()[1], SketchArc_15.results()[1], SketchArc_16.results()[1]]
+SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects)
+[SketchArc_17, SketchArc_18, SketchArc_19, SketchArc_20, SketchArc_21, SketchArc_22, SketchArc_23, SketchArc_24, SketchArc_25, SketchArc_26, SketchArc_27, SketchArc_28, SketchArc_29, SketchLine_7, SketchArc_30, SketchArc_31, SketchArc_32] = SketchConstraintMirror_1.mirrored()
+SketchLine_8 = Sketch_1.addLine(0, -145, 31.89121696112821, 27.06960882369163)
+SketchLine_8.setName("SketchLine_43")
+SketchLine_8.result().setName("SketchLine_43")
+SketchLine_8.setAuxiliary(True)
+SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchArc_1.results()[1])
+SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_8.result(), SketchLine_1.result(), 10.5, type = "Direct")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "size_z", 0)
+
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [36])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [204])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [408])
+model.testResultsVolumes(Extrusion_1, [16403.0029])
+
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_2.createdFeature()
+SketchLine_9.setName("SketchLine_8")
+SketchLine_9.result().setName("SketchLine_8")
+SketchArc_33 = Sketch_2.addArc(0, -145, 0, 26, 48.1858267258401, 19.0704912613701, True)
+SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchLine_9.result(), SketchArc_33.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1_2__cc"), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_33.center())
+SketchProjection_4 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_17_2_StartVertex"), False)
+SketchPoint_2 = SketchProjection_4.createdFeature()
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchArc_33.startPoint(), SketchAPI_Point(SketchPoint_2).coordinates(), 4, True)
+SketchLine_10 = Sketch_2.addLine(48.1858267258401, 19.0704912613701, 49.7056919497355, 16.28668032699112)
+SketchLine_10.setName("SketchLine_9")
+SketchLine_10.result().setName("SketchLine_9")
+SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchArc_33.endPoint(), SketchLine_10.startPoint())
+SketchArc_34 = Sketch_2.addArc(48.03804881864168, 15.3762044144511, 49.7056919497355, 16.28668032699112, 49.93150121822762, 15.21860361971252, True)
+SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchArc_34.startPoint())
+SketchConstraintTangent_17 = Sketch_2.setTangent(SketchLine_10.result(), SketchArc_34.results()[1])
+SketchLine_11 = Sketch_2.addLine(49.93150121822762, 15.21860361971252, 49.21181499063341, 6.57212682467093)
+SketchLine_11.setName("SketchLine_10")
+SketchLine_11.result().setName("SketchLine_10")
+SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchArc_34.endPoint(), SketchLine_11.startPoint())
+SketchConstraintTangent_18 = Sketch_2.setTangent(SketchLine_11.result(), SketchArc_34.results()[1])
+SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_2"), False)
+SketchLine_12 = SketchProjection_5.createdFeature()
+SketchLine_12.setName("SketchLine_11")
+SketchLine_12.result().setName("SketchLine_11")
+SketchConstraintParallel_3 = Sketch_2.setParallel(SketchLine_12.result(), SketchLine_11.result())
+SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_11.startPoint(), SketchLine_12.result(), 1.6, True)
+SketchArc_35 = Sketch_2.addArc(47.81663953830692, 6.68825372605725, 49.21181499063341, 6.57212682467093, 47.07590600961045, 5.500266419952984, True)
+SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchArc_35.startPoint())
+SketchConstraintTangent_19 = Sketch_2.setTangent(SketchLine_11.result(), SketchArc_35.results()[1])
+SketchProjection_6 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_14_2__cc"), False)
+SketchPoint_3 = SketchProjection_6.createdFeature()
+SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchArc_35.center())
+SketchArc_36 = Sketch_2.addArc(0, -70, 47.07590600961045, 5.500266419952984, 0, 18.97432863534041, False)
+SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchArc_35.endPoint(), SketchArc_36.startPoint())
+SketchConstraintTangent_20 = Sketch_2.setTangent(SketchArc_35.results()[1], SketchArc_36.results()[1])
+SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchArc_36.endPoint(), SketchLine_9.result())
+SketchProjection_7 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_32_2__cc"), False)
+SketchPoint_4 = SketchProjection_7.createdFeature()
+SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_4).coordinates(), SketchArc_36.center())
+SketchLine_13 = Sketch_2.addLine(51.52598744945789, 15.0858871609853, 49.93150121822762, 15.21860361971252)
+SketchLine_13.setName("SketchLine_12")
+SketchLine_13.result().setName("SketchLine_12")
+SketchLine_13.setAuxiliary(True)
+SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchArc_34.endPoint(), SketchLine_13.endPoint())
+SketchConstraintPerpendicular_2 = Sketch_2.setPerpendicular(SketchLine_11.result(), SketchLine_13.result())
+SketchLine_14 = Sketch_2.addLine(0, 33.22217618290702, 48.1858267258401, 19.0704912613701)
+SketchLine_14.setName("SketchLine_13")
+SketchLine_14.result().setName("SketchLine_13")
+SketchLine_14.setAuxiliary(True)
+SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_9.result())
+SketchConstraintCoincidence_49 = Sketch_2.setCoincident(SketchArc_33.endPoint(), SketchLine_14.endPoint())
+SketchConstraintTangent_21 = Sketch_2.setTangent(SketchArc_33.results()[1], SketchLine_14.result())
+SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_14.result(), SketchLine_10.result(), 135, type = "Direct")
+SketchConstraintRadius_11 = Sketch_2.setRadius(SketchArc_34.results()[1], 1.9)
+SketchConstraintMirror_2_objects = [SketchArc_33.results()[1], SketchLine_10.result(), SketchArc_34.results()[1], SketchLine_11.result(), SketchArc_35.results()[1], SketchArc_36.results()[1]]
+SketchConstraintMirror_2 = Sketch_2.addMirror(SketchLine_9.result(), SketchConstraintMirror_2_objects)
+[SketchArc_37, SketchLine_15, SketchArc_38, SketchLine_16, SketchArc_39, SketchArc_40] = SketchConstraintMirror_2.mirrored()
+SketchLine_16.setName("SketchLine_15")
+SketchLine_16.result().setName("SketchLine_15")
+SketchLine_15.setName("SketchLine_14")
+SketchLine_15.result().setName("SketchLine_14")
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face"), 0, model.selection("FACE", "Extrusion_1_1/To_Face"), 4.4, [model.selection("SOLID", "Extrusion_1_1")])
+
+model.testNbResults(ExtrusionCut_1, 1)
+model.testNbSubResults(ExtrusionCut_1, [0])
+model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.FACE, [49])
+model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.EDGE, [276])
+model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.VERTEX, [552])
+model.testResultsVolumes(ExtrusionCut_1, [12313.7939])
+
+Chamfer_1 = model.addChamfer(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/From_Face")], True, "chamfer", "chamfer", keepSubResults = True)
+
+model.testNbResults(Chamfer_1, 1)
+model.testNbSubResults(Chamfer_1, [0])
+model.testNbSubShapes(Chamfer_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Chamfer_1, GeomAPI_Shape.FACE, [83])
+model.testNbSubShapes(Chamfer_1, GeomAPI_Shape.EDGE, [412])
+model.testNbSubShapes(Chamfer_1, GeomAPI_Shape.VERTEX, [824])
+model.testResultsVolumes(Chamfer_1, [11962.2801])
+
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "chamfer", True)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchArc_12_2"), False)
+SketchArc_41 = SketchProjection_8.createdFeature()
+SketchArc_42 = Sketch_3.addArc(47.42857142857143, 14.08026468498505, 53.87940795452356, 15.47550950774626, 42.38734178332437, 18.34007731747046, False)
+SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchAPI_Arc(SketchArc_41).center(), SketchArc_42.center())
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_48")
+SketchLine_17 = Sketch_3.addLine(47.42857142857143, 14.08026468498505, 52.31556879671699, 15.13726833859203)
+SketchLine_17.setName("SketchLine_16")
+SketchLine_17.result().setName("SketchLine_16")
+SketchLine_17.setAuxiliary(True)
+SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchAPI_Arc(SketchArc_41).center(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchAPI_Arc(SketchArc_41).endPoint(), SketchLine_17.endPoint())
+SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchArc_42.startPoint(), SketchLine_17.result())
+SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_17.endPoint(), SketchArc_42.startPoint(), "2*chamfer", True)
+SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_2/SketchArc_34_2"), False)
+SketchArc_43 = SketchProjection_9.createdFeature()
+SketchArc_44 = Sketch_3.addArc(45.66073233717504, 15.57407945314024, 49.93150121822762, 15.21860361971246, 42.38734178332437, 18.34007731747046, False)
+SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_2/SketchLine_12"), False)
+SketchLine_18 = SketchProjection_10.createdFeature()
+SketchLine_18.setName("SketchLine_17")
+SketchLine_18.result().setName("SketchLine_17")
+SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchArc_44.startPoint(), SketchLine_18.result())
+SketchConstraintDistance_8 = Sketch_3.setDistance(SketchArc_44.startPoint(), SketchAPI_Line(SketchLine_18).startPoint(), "2*chamfer", True)
+SketchLine_19 = Sketch_3.addLine(47.42857142857143, 14.08026468498505, 42.38734178332437, 18.34007731747046)
+SketchLine_19.setName("SketchLine_18")
+SketchLine_19.result().setName("SketchLine_18")
+SketchLine_19.setAuxiliary(True)
+SketchConstraintCoincidence_55 = Sketch_3.setCoincident(SketchAPI_Arc(SketchArc_41).center(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_56 = Sketch_3.setCoincident(SketchArc_42.endPoint(), SketchLine_19.endPoint())
+SketchConstraintPerpendicular_3 = Sketch_3.setPerpendicular(SketchArc_44.results()[1], SketchLine_18.result())
+SketchConstraintCoincidence_57 = Sketch_3.setCoincident(SketchArc_44.endPoint(), SketchLine_19.endPoint())
+SketchLine_20 = Sketch_3.addLine(49.93150121822762, 15.21860361971252, 53.87940795452356, 15.47550950774626)
+SketchLine_20.setName("SketchLine_22")
+SketchLine_20.result().setName("SketchLine_22")
+SketchConstraintCoincidence_58 = Sketch_3.setCoincident(SketchAPI_Arc(SketchArc_43).startPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_59 = Sketch_3.setCoincident(SketchArc_42.startPoint(), SketchLine_20.endPoint())
+SketchConstraintCoincidence_60 = Sketch_3.setCoincident(SketchArc_44.center(), SketchLine_19.result())
+model.do()
+
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "2*chamfer", False)
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
+SketchProjection_11 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_3/SketchArc_42_2"), False)
+SketchArc_45 = SketchProjection_11.createdFeature()
+SketchArc_46 = Sketch_4.addArc(47.42857142857143, 14.08026468498505, 51.5336492178137, 14.96814775401492, 44.22051619977783, 16.79105454202122, False)
+SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchAPI_Arc(SketchArc_45).center(), SketchArc_46.center())
+SketchProjection_12 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_3/SketchLine_16"), False)
+SketchLine_21 = SketchProjection_12.createdFeature()
+SketchLine_21.setName("SketchLine_19")
+SketchLine_21.result().setName("SketchLine_19")
+SketchProjection_13 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_3/SketchLine_18"), False)
+SketchLine_22 = SketchProjection_13.createdFeature()
+SketchLine_22.setName("SketchLine_20")
+SketchLine_22.result().setName("SketchLine_20")
+SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_46.startPoint(), SketchLine_21.result())
+SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchArc_46.endPoint(), SketchLine_22.result())
+SketchConstraintDistance_9 = Sketch_4.setDistance(SketchArc_46.startPoint(), SketchAPI_Arc(SketchArc_45).startPoint(), "3*chamfer", True)
+SketchProjection_14 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_3/SketchArc_44_2"), False)
+SketchArc_47 = SketchProjection_14.createdFeature()
+SketchArc_48 = Sketch_4.addArc(45.66073233717504, 15.57407945314024, 52.32323056507302, 15.01952893162158, 40.55416736687089, 19.8891000929197, False)
+SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchAPI_Arc(SketchArc_47).center(), SketchArc_48.center())
+SketchLine_23 = Sketch_4.addLine(45.66073233717504, 15.57407945314024, 49.93150121822762, 15.21860361971246)
+SketchLine_23.setName("SketchLine_21")
+SketchLine_23.result().setName("SketchLine_21")
+SketchLine_23.setAuxiliary(True)
+SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchAPI_Arc(SketchArc_47).center(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchAPI_Arc(SketchArc_47).startPoint(), SketchLine_23.endPoint())
+SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_48.startPoint(), SketchLine_23.result())
+SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_48.endPoint(), SketchLine_22.result())
+SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_23.endPoint(), SketchArc_48.startPoint(), "3*chamfer", True)
+model.do()
+
+Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Sketch_3/SketchArc_42_2"), model.selection("EDGE", "Sketch_4/SketchArc_46_2")])
+Filling_2 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Sketch_3/SketchArc_44_2"), model.selection("EDGE", "Sketch_4/SketchArc_48_2")])
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_42_2f-SketchArc_44_2r-SketchLine_22f")])
+
+Plane_6 = model.addPlane(Part_1_doc, model.selection("EDGE", "Sketch_3/SketchLine_22"), model.selection("VERTEX", "[Filling_2_1/Edge_0_1]e[Filling_2_1/Edge_0_4]e"), False)
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_3"))
+SketchProjection_15 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_3/SketchLine_22"), True)
+SketchLine_24 = SketchProjection_15.createdFeature()
+SketchLine_24.setName("SketchLine_23")
+SketchLine_24.result().setName("SketchLine_23")
+SketchProjection_16 = Sketch_5.addProjection(model.selection("EDGE", "Filling_1_1/Edge_0_1"), False)
+SketchBSpline_1 = SketchProjection_16.createdFeature()
+SketchProjection_17 = Sketch_5.addProjection(model.selection("EDGE", "Filling_2_1/Edge_0_1"), False)
+SketchBSpline_2 = SketchProjection_17.createdFeature()
+SketchLine_25 = Sketch_5.addLine(54.7440877920758, -3.054064947639794, 52.78524259618538, -1.013740096412265)
+SketchLine_25.setName("SketchLine_24")
+SketchLine_25.result().setName("SketchLine_24")
+SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine_24).endPoint(), SketchLine_25.startPoint())
+SketchLine_26 = Sketch_5.addLine(52.78524259618538, -1.013740096412265, 50.78800926284204, -3.016502941130004)
+SketchLine_26.setName("SketchLine_25")
+SketchLine_26.result().setName("SketchLine_25")
+SketchConstraintCoincidence_70 = Sketch_5.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
+SketchConstraintCoincidence_71 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine_24).startPoint(), SketchLine_26.endPoint())
+SketchConstraintCoincidence_72 = Sketch_5.setCoincident(SketchLine_26.startPoint(), SketchBSpline_1.result())
+SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchLine_26.startPoint(), SketchBSpline_2.result())
+model.do()
+Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchProjection_15r-SketchLine_24f-SketchLine_25f")])
+
+Solid_1_objects = [model.selection("FACE", "Filling_1_1"), model.selection("FACE", "Filling_2_1"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")]
+Solid_1 = model.addSolid(Part_1_doc, Solid_1_objects)
+
+model.testNbResults(Solid_1, 1)
+model.testNbSubResults(Solid_1, [0])
+model.testNbSubShapes(Solid_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Solid_1, GeomAPI_Shape.FACE, [4])
+model.testNbSubShapes(Solid_1, GeomAPI_Shape.EDGE, [12])
+model.testNbSubShapes(Solid_1, GeomAPI_Shape.VERTEX, [24])
+model.testResultsVolumes(Solid_1, [13.6834876])
+
+Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Solid_1_1/Modified_Face&Filling_1_1/Filling_1_1][Solid_1_1/Modified_Face&Filling_2_1/Filling_2_1]")], 0.4, keepSubResults = True)
+
+model.testNbResults(Fillet_1, 1)
+model.testNbSubResults(Fillet_1, [0])
+model.testNbSubShapes(Fillet_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fillet_1, GeomAPI_Shape.FACE, [5])
+model.testNbSubShapes(Fillet_1, GeomAPI_Shape.EDGE, [18])
+model.testNbSubShapes(Fillet_1, GeomAPI_Shape.VERTEX, [36])
+model.testResultsVolumes(Fillet_1, [13.34526088678])
+
+Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "Fillet_1_1")], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Chamfer_1_1")], [model.selection("COMPOUND", "Symmetry_1_1")], keepSubResults = True)
+
+model.testNbResults(Cut_1, 1)
+model.testNbSubResults(Cut_1, [0])
+model.testNbSubShapes(Cut_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Cut_1, GeomAPI_Shape.FACE, [87])
+model.testNbSubShapes(Cut_1, GeomAPI_Shape.EDGE, [436])
+model.testNbSubShapes(Cut_1, GeomAPI_Shape.VERTEX, [872])
+model.testResultsVolumes(Cut_1, [11957.973])
+
+Sketch_6 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
+SketchLine_27 = Sketch_6.addLine(-32, 0, -29, 0)
+SketchLine_27.setName("SketchLine_26")
+SketchLine_27.result().setName("SketchLine_26")
+SketchLine_28 = Sketch_6.addLine(-29, 0, -28, 1)
+SketchLine_28.setName("SketchLine_27")
+SketchLine_28.result().setName("SketchLine_27")
+SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
+SketchLine_29 = Sketch_6.addLine(-28, 1, -28, 4)
+SketchLine_29.setName("SketchLine_28")
+SketchLine_29.result().setName("SketchLine_28")
+SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
+SketchConstraintVertical_1 = Sketch_6.setVertical(SketchLine_29.result())
+SketchLine_30 = Sketch_6.addLine(-28, 4, -29, 5)
+SketchLine_30.setName("SketchLine_29")
+SketchLine_30.result().setName("SketchLine_29")
+SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
+SketchLine_31 = Sketch_6.addLine(-29, 5, -32, 5)
+SketchLine_31.setName("SketchLine_30")
+SketchLine_31.result().setName("SketchLine_30")
+SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchConstraintHorizontal_1 = Sketch_6.setHorizontal(SketchLine_31.result())
+SketchLine_32 = Sketch_6.addLine(-32, 5, -33, 4)
+SketchLine_32.setName("SketchLine_31")
+SketchLine_32.result().setName("SketchLine_31")
+SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
+SketchLine_33 = Sketch_6.addLine(-33, 4, -33, 1)
+SketchLine_33.setName("SketchLine_32")
+SketchLine_33.result().setName("SketchLine_32")
+SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
+SketchConstraintVertical_2 = Sketch_6.setVertical(SketchLine_33.result())
+SketchLine_34 = Sketch_6.addLine(-33, 1, -32, 0)
+SketchLine_34.setName("SketchLine_33")
+SketchLine_34.result().setName("SketchLine_33")
+SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_27.startPoint(), SketchLine_34.endPoint())
+SketchProjection_18 = Sketch_6.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_35 = SketchProjection_18.createdFeature()
+SketchLine_35.setName("SketchLine_34")
+SketchLine_35.result().setName("SketchLine_34")
+SketchConstraintCollinear_1 = Sketch_6.setCollinear(SketchLine_35.result(), SketchLine_27.result())
+SketchConstraintLength_1 = Sketch_6.setLength(SketchLine_27.result(), "size_z-2")
+SketchConstraintEqual_1 = Sketch_6.setEqual(SketchLine_27.result(), SketchLine_29.result())
+SketchConstraintEqual_2 = Sketch_6.setEqual(SketchLine_29.result(), SketchLine_31.result())
+SketchConstraintEqual_3 = Sketch_6.setEqual(SketchLine_31.result(), SketchLine_33.result())
+SketchConstraintEqual_4 = Sketch_6.setEqual(SketchLine_28.result(), SketchLine_30.result())
+SketchConstraintEqual_5 = Sketch_6.setEqual(SketchLine_30.result(), SketchLine_32.result())
+SketchConstraintEqual_6 = Sketch_6.setEqual(SketchLine_32.result(), SketchLine_34.result())
+SketchConstraintDistanceHorizontal_2 = Sketch_6.setHorizontalDistance(SketchLine_27.endPoint(), SketchLine_28.endPoint(), 1)
+SketchConstraintDistanceHorizontal_3 = Sketch_6.setHorizontalDistance(SketchLine_31.startPoint(), SketchLine_29.endPoint(), 1)
+SketchConstraintDistanceVertical_5 = Sketch_6.setVerticalDistance(SketchLine_27.endPoint(), SketchLine_28.endPoint(), 1)
+SketchConstraintDistance_11 = Sketch_6.setDistance(SketchAPI_Line(SketchLine_35).startPoint(), SketchLine_29.result(), 28, True)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), 79, -76.5)
+
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_6/Face-SketchLine_26r-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f"))
+SketchProjection_19 = Sketch_7.addProjection(model.selection("EDGE", "Sketch_6/SketchLine_27"), True)
+SketchLine_36 = SketchProjection_19.createdFeature()
+SketchLine_36.setName("SketchLine_35")
+SketchLine_36.result().setName("SketchLine_35")
+SketchProjection_20 = Sketch_7.addProjection(model.selection("EDGE", "Sketch_6/SketchLine_28"), True)
+SketchLine_37 = SketchProjection_20.createdFeature()
+SketchLine_37.setName("SketchLine_36")
+SketchLine_37.result().setName("SketchLine_36")
+SketchProjection_21 = Sketch_7.addProjection(model.selection("EDGE", "Sketch_6/SketchLine_29"), True)
+SketchLine_38 = SketchProjection_21.createdFeature()
+SketchLine_38.setName("SketchLine_37")
+SketchLine_38.result().setName("SketchLine_37")
+SketchLine_39 = Sketch_7.addLine(-29, 5, -31, 5)
+SketchLine_39.setName("SketchLine_38")
+SketchLine_39.result().setName("SketchLine_38")
+SketchConstraintCoincidence_82 = Sketch_7.setCoincident(SketchAPI_Line(SketchLine_38).endPoint(), SketchLine_39.startPoint())
+SketchLine_40 = Sketch_7.addLine(-31, 5, -32, 4)
+SketchLine_40.setName("SketchLine_39")
+SketchLine_40.result().setName("SketchLine_39")
+SketchConstraintCoincidence_83 = Sketch_7.setCoincident(SketchLine_39.endPoint(), SketchLine_40.startPoint())
+SketchLine_41 = Sketch_7.addLine(-32, 4, -32, 1)
+SketchLine_41.setName("SketchLine_40")
+SketchLine_41.result().setName("SketchLine_40")
+SketchConstraintCoincidence_84 = Sketch_7.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
+SketchConstraintVertical_3 = Sketch_7.setVertical(SketchLine_41.result())
+SketchLine_42 = Sketch_7.addLine(-32, 1, -31, 0)
+SketchLine_42.setName("SketchLine_41")
+SketchLine_42.result().setName("SketchLine_41")
+SketchConstraintCoincidence_85 = Sketch_7.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
+SketchLine_43 = Sketch_7.addLine(-31, 0, -29, 0)
+SketchLine_43.setName("SketchLine_42")
+SketchLine_43.result().setName("SketchLine_42")
+SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchAPI_Line(SketchLine_36).startPoint(), SketchLine_43.endPoint())
+SketchConstraintHorizontal_2 = Sketch_7.setHorizontal(SketchLine_43.result())
+SketchConstraintHorizontal_3 = Sketch_7.setHorizontal(SketchLine_39.result())
+SketchConstraintEqual_7 = Sketch_7.setEqual(SketchLine_40.result(), SketchLine_42.result())
+SketchConstraintEqual_8 = Sketch_7.setEqual(SketchLine_42.result(), SketchLine_36.result())
+SketchConstraintEqual_9 = Sketch_7.setEqual(SketchLine_37.result(), SketchLine_41.result())
+SketchConstraintEqual_10 = Sketch_7.setEqual(SketchLine_39.result(), SketchLine_43.result())
+SketchConstraintLength_2 = Sketch_7.setLength(SketchLine_39.result(), 2)
+model.do()
+ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), model.selection("FACE", "Extrusion_2_1/From_Face"), 0, model.selection("FACE", "Extrusion_2_1/From_Face"), "1.6+2*chamfer", [model.selection("SOLID", "Extrusion_2_1")])
+
+model.testNbResults(ExtrusionFuse_1, 1)
+model.testNbSubResults(ExtrusionFuse_1, [0])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.FACE, [19])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.EDGE, [90])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.VERTEX, [180])
+model.testResultsVolumes(ExtrusionFuse_1, [115.1])
+
+Plane_7 = model.addPlane(Part_1_doc, model.selection("EDGE", "Sketch_1/SketchLine_43"), model.selection("VERTEX", "Sketch_1/SketchArc_1"), True)
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_4"))
+SketchLine_44 = Sketch_8.addLine(30.42415119636338, 0, 27.42415119636338, 0)
+SketchConstraintHorizontal_4 = Sketch_8.setHorizontal(SketchLine_44.result())
+SketchLine_45 = Sketch_8.addLine(27.42415119636338, 0, 26.42415119636338, -1)
+SketchConstraintCoincidence_88 = Sketch_8.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
+SketchLine_46 = Sketch_8.addLine(26.42415119636338, -1, 26.42415119636338, -4)
+SketchConstraintCoincidence_89 = Sketch_8.setCoincident(SketchLine_45.endPoint(), SketchLine_46.startPoint())
+SketchConstraintVertical_4 = Sketch_8.setVertical(SketchLine_46.result())
+SketchLine_47 = Sketch_8.addLine(26.42415119636338, -4, 27.42415119636338, -5)
+SketchConstraintCoincidence_90 = Sketch_8.setCoincident(SketchLine_46.endPoint(), SketchLine_47.startPoint())
+SketchLine_48 = Sketch_8.addLine(27.42415119636338, -5, 30.42415119636338, -5)
+SketchConstraintCoincidence_91 = Sketch_8.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
+SketchConstraintHorizontal_5 = Sketch_8.setHorizontal(SketchLine_48.result())
+SketchLine_49 = Sketch_8.addLine(30.42415119636338, -5, 31.4241511964612, -4)
+SketchConstraintCoincidence_92 = Sketch_8.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
+SketchLine_50 = Sketch_8.addLine(31.4241511964612, -4, 31.4241511964612, -1)
+SketchConstraintCoincidence_93 = Sketch_8.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
+SketchConstraintVertical_5 = Sketch_8.setVertical(SketchLine_50.result())
+SketchLine_51 = Sketch_8.addLine(31.4241511964612, -1, 30.42415119636338, 0)
+SketchConstraintCoincidence_94 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
+SketchConstraintCoincidence_95 = Sketch_8.setCoincident(SketchLine_44.startPoint(), SketchLine_51.endPoint())
+SketchProjection_22 = Sketch_8.addProjection(model.selection("VERTEX", "Sketch_1/SketchArc_1"), False)
+SketchPoint_5 = SketchProjection_22.createdFeature()
+SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_44.result(), "size_z-2")
+SketchConstraintEqual_11 = Sketch_8.setEqual(SketchLine_44.result(), SketchLine_46.result())
+SketchConstraintEqual_12 = Sketch_8.setEqual(SketchLine_46.result(), SketchLine_48.result())
+SketchConstraintEqual_13 = Sketch_8.setEqual(SketchLine_48.result(), SketchLine_50.result())
+SketchConstraintEqual_14 = Sketch_8.setEqual(SketchLine_45.result(), SketchLine_47.result())
+SketchConstraintEqual_15 = Sketch_8.setEqual(SketchLine_47.result(), SketchLine_49.result())
+SketchConstraintEqual_16 = Sketch_8.setEqual(SketchLine_49.result(), SketchLine_51.result())
+SketchConstraintDistanceHorizontal_4 = Sketch_8.setHorizontalDistance(SketchLine_45.startPoint(), SketchLine_45.endPoint(), 1)
+SketchConstraintDistanceHorizontal_5 = Sketch_8.setHorizontalDistance(SketchLine_47.endPoint(), SketchLine_46.endPoint(), 1)
+SketchConstraintDistanceVertical_6 = Sketch_8.setVerticalDistance(SketchLine_44.endPoint(), SketchLine_46.startPoint(), 1)
+SketchConstraintCoincidence_96 = Sketch_8.setCoincident(SketchAPI_Point(SketchPoint_5).coordinates(), SketchLine_44.result())
+SketchConstraintCoincidence_97 = Sketch_8.setCoincident(SketchAPI_Point(SketchPoint_5).coordinates(), SketchLine_46.result())
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_44r-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f")], model.selection(), "size_y-5+3.8", "-size_y+5+2*chamfer")
+
+model.testNbResults(Extrusion_3, 1)
+model.testNbSubResults(Extrusion_3, [0])
+model.testNbSubShapes(Extrusion_3, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_3, GeomAPI_Shape.FACE, [10])
+model.testNbSubShapes(Extrusion_3, GeomAPI_Shape.EDGE, [48])
+model.testNbSubShapes(Extrusion_3, GeomAPI_Shape.VERTEX, [96])
+model.testResultsVolumes(Extrusion_3, [124.2])
+
+Symmetry_2 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", "ExtrusionFuse_1_1"), model.selection("SOLID", "Extrusion_3_1")], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+Fuse_1_objects_1 = [model.selection("SOLID", "Cut_1_1"), model.selection("COMPOUND", "Symmetry_2_1"), model.selection("COMPOUND", "Symmetry_2_2")]
+Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, removeEdges = True, keepSubResults = True)
+Fuse_1.result().setName("Visor")
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [125])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [668])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [1336])
+model.testResultsVolumes(Fuse_1, [12309.7614])
+
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+
+model.end()
+
+model.begin()
+ParamSize.setValue(160)
+model.end()
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [125])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [668])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [1336])
+model.testResultsVolumes(Fuse_1, [10224.4774])
+
+model.undo()
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [125])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [668])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [1336])
+model.testResultsVolumes(Fuse_1, [12309.7614])
