# loop for all given modules
#########################################################
foreach module (${modules})
- echo ">>> Processing ${module} module"
+ echo ">>> Processing ${module} module"
- set module_src=`printenv ${module}_SRC_DIR`
- set module_build=${BUILD_DIR}/${module}_BUILD
+ set module_src=`printenv ${module}_SRC_DIR`
+ set module_build=${BUILD_DIR}/${module}_BUILD
- if ( ${module_src} != "" ) then
- cd ${BUILD_DIR}
- #########################################################
- # check if sources directory exists
- #########################################################
- if ( ! -e ${module_src} ) then
- echo "\!\!\! Error \!\!\! Can't find sources directory: ${module_src} does not exist."
- continue
- endif
- #########################################################
- # check if configure script exists
- #########################################################
- set cfg_exist=0
- if ( -e ${module_src}/configure ) then
- set cfg_exist=1
- endif
- #########################################################
- # perform build_configure if -b flag is given or if
- # configure script does not exist (first compilation?)
- #########################################################
- if ( $is_build_configure == 1 || $cfg_exist == 0 ) then
- echo "... Performing build_configure"
+ if ( ${module_src} != "" ) then
+ cd ${BUILD_DIR}
#########################################################
- # check if build_configure script exists
+ # check if sources directory exists
#########################################################
- if ( ! -e ${module_src}/build_configure && "${module}" != "PARAVIS" ) then
- echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
- else
- if ( "${module}" == "PARAVIS" ) then
- echo "\!\!\! Warning \!\!\! build_configure step is not executed for ${module}."
- else
+ if ( ! -e ${module_src} ) then
+ echo "\!\!\! Error \!\!\! Can't find sources directory: ${module_src} does not exist."
+ continue
+ endif
+ #########################################################
+ # check if configure script exists
+ #########################################################
+ set cfg_exist=0
+ if ( -e ${module_src}/configure ) then
+ set cfg_exist=1
+ endif
+ #########################################################
+ # perform build_configure if -b flag is given or if
+ # configure script does not exist (first compilation?)
+ #########################################################
+ if ( $is_build_configure == 1 || $cfg_exist == 0 ) then
+ echo "... Performing build_configure"
#########################################################
- # call build_configure
+ # check if build_configure script exists
#########################################################
- if (! ($?BUILDCONF_OPTS) ) then
- set mybuildconf_keys=""
+ if ( ! -e ${module_src}/build_configure && "${module}" != "PARAVIS" ) then
+ echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
else
- set mybuildconf_keys="${BUILDCONF_OPTS}"
- endif
- if ( $inst_with_gui == 0 ) then
- set mybuildconf_keys="${mybuildconf_keys} --without-gui"
- endif
- cd ${module_src}
- ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
- #########################################################
- # echo possible errors
- #########################################################
- if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)" >/dev/stderr
+ if ( "${module}" == "PARAVIS" ) then
+ echo "\!\!\! Warning \!\!\! build_configure step is not executed for ${module}."
+ else
+ #########################################################
+ # call build_configure
+ #########################################################
+ if (! ($?BUILDCONF_OPTS) ) then
+ set mybuildconf_keys=""
+ else
+ set mybuildconf_keys="${BUILDCONF_OPTS}"
+ endif
+ if ( $inst_with_gui == 0 ) then
+ set mybuildconf_keys="${mybuildconf_keys} --without-gui"
+ endif
+ cd ${module_src}
+ ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
+ #########################################################
+ # echo possible errors
+ #########################################################
+ if ( $verbose_level > 0 ) then
+ cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)"
+ endif
+ endif
endif
endif
+ #########################################################
+ # deleting build directory if -d flag is given
+ #########################################################
+ if ( -e ${module_build} && $is_delete == 1 ) then
+ echo "... Removing ${module_build}"
+ chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
+ endif
endif
- endif
- #########################################################
- # deleting build directory if -d flag is given
- #########################################################
- if ( -e ${module_build} && $is_delete == 1 ) then
- echo "... Removing ${module_build}"
- chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
- if ( "$?" != "0" ) then
- echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
- endif
- endif
- #########################################################
- # creating build directory if it does not exist
- #########################################################
- if ( ! -e ${module_build} ) then
- mkdir -p ${module_build} >& /dev/null
- if ( "$?" != "0" ) then
- echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
- continue
+ #########################################################
+ # creating build directory if it does not exist
+ #########################################################
+ if ( ! -e ${module_build} ) then
+ mkdir -p ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
+ continue
+ endif
endif
- endif
- cd ${module_build}
- #########################################################
- # check if top Makefile exists in build directory, i.e.
- # is it necessary to run configure script
- #########################################################
- set mkfile_exist=0
- if ( -e ${module_build}/Makefile ) then
- set mkfile_exist=1
- endif
- #########################################################
- # check if configure options are changed from the
- # previous launch
- #########################################################
- set opts_changed=0
-## if ( -f ${module_build}/config.log ) then
-## set old_prefix=`grep -e '^prefix=' ${module_build}/config.log | sed -e "s%^prefix='\(.*\)'%\1%"`
-## if ( "$old_prefix" != "$prefix" ) then
-## set opts_changed=1
-## endif
-## endif
- #########################################################
- # define installation directory (by using module's version
- # number); default is a build directory
- #########################################################
- set vx=""
- if ( -e ${module_src}/configure.ac ) then
- set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
- else if ( -e ${module_src}/configure.in.base ) then
- set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
- if ( "$vx" == "" ) then
- set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ cd ${module_build}
+ #########################################################
+ # check if top Makefile exists in build directory, i.e.
+ # is it necessary to run configure script
+ #########################################################
+ set mkfile_exist=0
+ if ( -e ${module_build}/Makefile ) then
+ set mkfile_exist=1
endif
- else if ( -e ${module_src}/CMakeLists.txt ) then
+ #########################################################
+ # check if configure options are changed from the
+ # previous launch
+ #########################################################
+ set opts_changed=0
+ #########################################################
+ # define installation directory (by using module's version
+ # number); default is a build directory
+ #########################################################
+ set vx=""
+ if ( -e ${module_src}/configure.ac ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ else if ( -e ${module_src}/configure.in.base ) then
+ set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
+ if ( "$vx" == "" ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ endif
+ else if ( -e ${module_src}/CMakeLists.txt ) then
set ver_maj=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAJOR | sed -e "s%[A-Z_() ]%%g"`
set ver_min=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MINOR | sed -e "s%[A-Z_() ]%%g"`
set ver_maintenance=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAINTENANCE | sed -e "s%[A-Z_() ]%%g"`
set vx="${ver_maj}.${ver_min}.${ver_maintenance}"
- endif
- if ( "$vx" != "" ) then
- set vx="_$vx"
- endif
- if ( "$prefix" == "" ) then
- #set module_root_dir=`printenv ${module}_ROOT_DIR`
- #if ( "$module_root_dir" != "" ) then
- # set px=$module_root_dir
- #else
- set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
- #endif
- else
- set px=${prefix}/${module}${vx}
- endif
- #########################################################
- # perform configure if -c flag is given or if
- # Makefile does not exist (first compilation?)
- #########################################################
- if ( $is_configure == 1 || $mkfile_exist == 0 || $opts_changed == 1 ) then
- echo "... Performing configure"
+ endif
+ if ( "$vx" != "" ) then
+ set vx="_$vx"
+ endif
+ if ( "$prefix" == "" ) then
+ set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
+ else
+ set px=${prefix}/${module}${vx}
+ endif
#########################################################
- # check if configure script exists
+ # perform configure if -c flag is given or if
+ # Makefile does not exist (first compilation?)
#########################################################
- if ( ! -e ${module_src}/configure && "${module}" != "PARAVIS" ) then
- echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
- else
- if (! ($?BUILDCONF_OPTS) ) then
- set myconf_keys=""
+ if ( $is_configure == 1 || $mkfile_exist == 0 || $opts_changed == 1 ) then
+ echo "... Performing configure"
+ #########################################################
+ # check if configure script exists
+ #########################################################
+ if ( ! -e ${module_src}/configure && "${module}" != "PARAVIS" ) then
+ echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
else
- set myconf_keys="${CONF_OPTS}"
- endif
- if ( $inst_with_gui == 0 ) then
- set myconf_keys="${myconf_keys} --without-gui"
- endif
- if ( "${module}" == "MED" && ($?METISDIR) && ($?SCOTCHDIR) ) then
- set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METISDIR} --with-scotch=${SCOTCHDIR}"
- endif
- if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
- set myconf_keys="${myconf_keys} --with-netgen=${NETGENHOME}"
- endif
+ if (! ($?BUILDCONF_OPTS) ) then
+ set myconf_keys=""
+ else
+ set myconf_keys="${CONF_OPTS}"
+ endif
+ if ( $inst_with_gui == 0 ) then
+ set myconf_keys="${myconf_keys} --without-gui"
+ endif
+ if ( "${module}" == "MED" && ($?METISDIR) && ($?SCOTCHDIR) ) then
+ set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METISDIR} --with-scotch=${SCOTCHDIR}"
+ endif
+ if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
+ set myconf_keys="${myconf_keys} --with-netgen=${NETGENHOME}"
+ endif
+
if ( "${module}" == "PARAVIS" ) then
cd ${module_build}; cmake ${module_src} -DCMAKE_INSTALL_PREFIX=$px >& ${LOG_DIR}/configure_${module}.log
else
${module_src}/configure --prefix=$px ${optim} ${myconf_keys} >& ${LOG_DIR}/configure_${module}.log
endif
- #########################################################
- # echo possible errors
- #########################################################
- if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": error:" >/dev/stderr
+
+ #########################################################
+ # echo possible errors
+ #########################################################
+ if ( $verbose_level > 0 ) then
+ cat ${LOG_DIR}/configure_${module}.log | grep ": error:"
+ endif
+ if ( $verbose_level > 1 ) then
+ cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:"
+ endif
endif
- if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:" >/dev/stderr
+ endif
+ #########################################################
+ # perform make
+ #########################################################
+ echo "... Performing make"
+ #########################################################
+ # first clear dependencies
+ #########################################################
+ find . -name ".dep*" -type f -exec rm -f {} \; >& /dev/null
+ #########################################################
+ # then make
+ #########################################################
+ if ( "${module}" == "PARAVIS" ) then
+ if ( ($?VTK_AUTOLOAD_PATH) ) then
+ setenv VTK_AUTOLOAD_PATH_BACKUP ${VTK_AUTOLOAD_PATH}
+ unsetenv VTK_AUTOLOAD_PATH
endif
endif
- endif
- #########################################################
- # perform make
- #########################################################
- echo "... Performing make"
- #########################################################
- # first clear dependencies
- #########################################################
- find . -name ".dep*" -type f -exec rm -f {} \; >& /dev/null
- make >& ${LOG_DIR}/make_${module}.log
- set sts=$status
- #########################################################
- # if make step is successful set the ${module}_ROOT_DIR
- # environment variable
- #########################################################
- #if ( $sts == 0 ) then
- # setenv ${module}_ROOT_DIR ${module_build}
- #endif
- #########################################################
- # print make errors
- #########################################################
- cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error' >/dev/stderr
- #########################################################
- # print compiler errors and warnings
- # Note: here awk is used to concatenate together several lines of single
- # error or warning message produced by stupid gnu compiler
- # Actually, instead of that we could use 'fmessage length=n' option of g++...
- #########################################################
- if ( $verbose_level > 0 ) then
- ###cat ${LOG_DIR}/make_${module}.log | grep ": error"
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@ >/dev/stderr
- endif
- if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@ >/dev/stderr
- endif
- #########################################################
- # perform make dev_docs step if -t flag is given
- #########################################################
- if ( $is_tui == 1 && $sts == 0 && -d ${module_build}/doc ) then
- cd ${module_build}/doc
- set dd=`cat Makefile | grep -E "dev_docs[[:space:]]*:"`
- if ( "$dd" != "" ) then
- echo "... Performing make dev_docs"
- make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
- cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]' >/dev/stderr
+ make >& ${LOG_DIR}/make_${module}.log
+ set sts=$status
+ if ( "${module}" == "PARAVIS" ) then
+ if ( ($?VTK_AUTOLOAD_PATH_BACKUP) ) then
+ setenv VTK_AUTOLOAD_PATH ${VTK_AUTOLOAD_PATH_BACKUP}
+ endif
endif
- endif
- cd ${module_build}
- #########################################################
- # perform make if -i or -p flags are given
- #########################################################
- if ( $is_install == 1 && $sts == 0 || "${module}" == "KERNEL" ) then
#########################################################
- # deleting build directory if -d flag is given
+ # if make step is successful set the ${module}_ROOT_DIR
+ # environment variable
#########################################################
- if ( -e $px && $is_delete == 1 ) then
- echo "... Removing $px"
- rm -rf $px >& /dev/null
- if ( "$?" != "0" ) then
- echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
+ #if ( $sts == 0 ) then
+ # setenv ${module}_ROOT_DIR ${module_build}
+ #endif
+ #########################################################
+ # print make errors
+ #########################################################
+ cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error'
+ #########################################################
+ # print compiler errors and warnings
+ # Note: here awk is used to concatenate together several lines of single
+ # error or warning message produced by stupid gnu compiler
+ # Actually, instead of that we could use 'fmessage length=n' option of g++...
+ #########################################################
+ if ( $verbose_level > 0 ) then
+ ###cat ${LOG_DIR}/make_${module}.log | grep ": error"
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@
+ endif
+ if ( $verbose_level > 1 ) then
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@
+ endif
+ #########################################################
+ # perform make dev_docs step if -t flag is given
+ #########################################################
+ if ( $is_tui == 1 && $sts == 0 && -d ${module_build}/doc ) then
+ cd ${module_build}/doc
+ set dd=`cat Makefile | grep -E "dev_docs[[:space:]]*:"`
+ if ( "$dd" != "" ) then
+ echo "... Performing make dev_docs"
+ make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
+ cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]'
endif
endif
- echo "... Performing make install"
- make install >& ${LOG_DIR}/make_install_${module}.log
- set sts=$status
+ cd ${module_build}
#########################################################
- # if make install step is successful set the
- # ${module}_ROOT_DIR environment variable
+ # perform make if -i or -p flags are given
#########################################################
- if ( $sts == 0 ) then
- setenv ${module}_ROOT_DIR $px
+ if ( $is_install == 1 && $sts == 0 || "${module}" == "KERNEL" ) then
+ #########################################################
+ # deleting build directory if -d flag is given
+ #########################################################
+ if ( -e $px && $is_delete == 1 ) then
+ echo "... Removing $px"
+ rm -rf $px >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
+ endif
+ endif
+ echo "... Performing make install"
+ make install >& ${LOG_DIR}/make_install_${module}.log
+ set sts=$status
+ #########################################################
+ # if make install step is successful set the
+ # ${module}_ROOT_DIR environment variable
+ #########################################################
+ if ( $sts == 0 ) then
+ setenv ${module}_ROOT_DIR $px
+ endif
endif
+ echo ">>> Finished ${module} module"
+ else
+ echo "\!\!\! Error \!\!\! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
endif
- echo ">>> Finished ${module} module"
- else
- echo "\!\!\! Error \!\!\! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
- endif
end
#########################################################
# finalize
