--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+# Test that append a new element to the end of Partition attributes does not
+# change the previous partition results selection..
+# Based on the CEA report mail 04.12.2018, page 7
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "ep_base", "0.65")
+model.addParameter(Part_1_doc, "ep_voiles", "0.1")
+model.addParameter(Part_1_doc, "ep_poteau", "0.15")
+model.addParameter(Part_1_doc, "h_ouverture", "0.95")
+model.addParameter(Part_1_doc, "h_apres_ouverture", "0.6")
+model.addParameter(Part_1_doc, "ep_dalles", "0.12")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0.275, 3.325, -0.375, 3.325)
+SketchLine_2 = Sketch_1.addLine(-0.375, 3.325, -0.375, -0.325)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-0.375, -0.325, 4.275, -0.325)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(4.275, -0.325, 4.275, 1.325)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(4.275, 1.325, 3.625, 1.325)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(3.625, 1.325, 3.625, 0.325)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(3.625, 0.325, 0.275, 0.3250000000000001)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(0.275, 0.3250000000000001, 0.275, 3.325)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.endPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_8.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_4.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "ep_base")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 3.65)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_3.result(), 4.65)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_4.result(), 1.65)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_3.result(), "ep_base", False)
+SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_9.result(), "0.275+ep_voiles/2", False)
+SketchLine_10 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_10.result(), "0.325+ep_voiles/2", False)
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_1.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), 0, 0.3)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/From_Face"))
+SketchLine_11 = Sketch_2.addLine(2.26, -2.31, 1.64, -2.31)
+SketchLine_12 = Sketch_2.addLine(1.64, -2.31, 1.64, -1.69)
+SketchLine_13 = Sketch_2.addLine(1.64, -1.69, 2.26, -1.69)
+SketchLine_14 = Sketch_2.addLine(2.26, -1.69, 2.26, -2.31)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
+SketchPoint_1 = Sketch_2.addPoint(1.925, -1.875)
+SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_11.result(), 0.62)
+SketchConstraintLength_5.setName("SketchConstraintLength_10")
+SketchConstraintEqual_2 = Sketch_2.setEqual(SketchLine_11.result(), SketchLine_12.result())
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchPoint_1.coordinates(), SketchLine_13.result(), "0.11+ep_poteau/2", False)
+SketchConstraintDistance_4.setName("SketchConstraintDistance_6")
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchPoint_1.coordinates(), SketchLine_12.result(), "0.21+ep_poteau/2", False)
+SketchConstraintDistance_5.setName("SketchConstraintDistance_7")
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_15 = SketchProjection_1.createdFeature()
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_16 = SketchProjection_2.createdFeature()
+SketchConstraintDistance_6 = Sketch_2.setDistance(SketchPoint_1.coordinates(), SketchLine_15.result(), "1.75+ep_poteau/2+ep_voiles/2", False)
+SketchConstraintDistance_6.setName("SketchConstraintDistance_8")
+SketchConstraintDistance_7 = Sketch_2.setDistance(SketchPoint_1.coordinates(), SketchLine_16.result(), "1.8+ep_poteau/2+ep_voiles/2", False)
+SketchConstraintDistance_7.setName("SketchConstraintDistance_9")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_14r-SketchLine_13r-SketchLine_12r-SketchLine_11r")], model.selection(), 0, 0.02)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f"))
+SketchLine_17 = Sketch_3.addLine(0, 2.950000000000001, 0, 1.700000000000001)
+SketchLine_17.setName("SketchLine_15")
+SketchLine_17.result().setName("SketchLine_15")
+SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_18.setName("SketchLine_16")
+SketchLine_18.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_17.startPoint(), SketchLine_18.result())
+SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchLine_18.result())
+SketchLine_19 = Sketch_3.addLine(0, 1.2, 0, 0)
+SketchLine_19.setName("SketchLine_17")
+SketchLine_19.result().setName("SketchLine_17")
+SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_19.startPoint(), SketchLine_18.result())
+SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_19.endPoint(), SketchLine_18.result())
+SketchLine_20 = Sketch_3.addLine(0, 0, 0.95, 0)
+SketchLine_20.setName("SketchLine_18")
+SketchLine_20.result().setName("SketchLine_18")
+SketchLine_21 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_21.setName("SketchLine_19")
+SketchLine_21.result().setName("SketchLine_19")
+SketchLine_22 = Sketch_3.addLine(2.525000000000001, 0, 3.975000000000001, 0)
+SketchLine_22.setName("SketchLine_20")
+SketchLine_22.result().setName("SketchLine_20")
+SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_21.result())
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_21.result())
+SketchLine_23 = Sketch_3.addLine(3.975000000000001, 0, 3.975000000000001, 0.95)
+SketchLine_23.setName("SketchLine_21")
+SketchLine_23.result().setName("SketchLine_21")
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
+SketchLine_24 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"))
+SketchLine_24.setName("SketchLine_22")
+SketchLine_24.result().setName("SketchLine_22")
+SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_17.result(), 1.25)
+SketchConstraintLength_6.setName("SketchConstraintLength_5")
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_19.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_20.startPoint(), SketchLine_19.endPoint())
+SketchConstraintLength_7 = Sketch_3.setLength(SketchLine_19.result(), "1.25-ep_voiles/2")
+SketchConstraintLength_7.setName("SketchConstraintLength_6")
+SketchConstraintLength_8 = Sketch_3.setLength(SketchLine_20.result(), "1-ep_voiles/2")
+SketchConstraintLength_8.setName("SketchConstraintLength_7")
+SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_22.result(), "1.5-ep_voiles/2")
+SketchConstraintLength_9.setName("SketchConstraintLength_8")
+SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_23.result())
+SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
+SketchLine_25.setName("SketchLine_23")
+SketchLine_25.result().setName("SketchLine_23")
+SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_22.endPoint(), SketchLine_25.result(), "0.25+ep_voiles/2", False)
+SketchConstraintDistance_8.setName("SketchConstraintDistance_5")
+SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_23.result(), "1-ep_voiles/2")
+SketchConstraintLength_10.setName("SketchConstraintLength_9")
+SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]"))
+SketchLine_26.setName("SketchLine_35")
+SketchLine_26.result().setName("SketchLine_35")
+SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_17.startPoint(), SketchLine_26.result(), 0.375, False)
+SketchConstraintDistance_9.setName("SketchConstraintDistance_12")
+model.do()
+Edge_1_objects = [model.selection("EDGE", "Sketch_3/SketchLine_15"), model.selection("EDGE", "Sketch_3/SketchLine_17"), model.selection("EDGE", "Sketch_3/SketchLine_18"), model.selection("EDGE", "Sketch_3/SketchLine_20"), model.selection("EDGE", "Sketch_3/SketchLine_21")]
+Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
+Extrusion_3_objects = [model.selection("EDGE", "Edge_1_1"), model.selection("EDGE", "Edge_1_2"), model.selection("EDGE", "Edge_1_3"), model.selection("EDGE", "Edge_1_4"), model.selection("EDGE", "Edge_1_5")]
+Extrusion_3 = model.addExtrusion(Part_1_doc, Extrusion_3_objects, model.selection("EDGE", "PartSet/OZ"), "h_ouverture", 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_3_1/Generated_Edge&Sketch_3/SketchLine_15_StartVertex]e[Extrusion_3_1/To_Edge]e"), model.selection("VERTEX", "[Extrusion_3_3/Generated_Edge&Sketch_3/SketchLine_18_StartVertex]e[Extrusion_3_3/To_Edge]e"), model.selection("VERTEX", "[Extrusion_3_4/Generated_Edge&Sketch_3/SketchLine_20_EndVertex]e[Extrusion_3_4/To_Edge]e"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_27 = Sketch_4.addLine(0, 2.950000000000001, 0, 0)
+SketchLine_27.setName("SketchLine_26")
+SketchLine_27.result().setName("SketchLine_26")
+SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "[Extrusion_3_1/Generated_Edge&Sketch_3/SketchLine_15_StartVertex]e[Extrusion_3_1/To_Edge]e"))
+SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchPoint_2.result())
+SketchPoint_3 = Sketch_4.addPoint(model.selection("VERTEX", "[Extrusion_3_3/Generated_Edge&Sketch_3/SketchLine_18_StartVertex]e[Extrusion_3_3/To_Edge]e"))
+SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchPoint_3.result())
+SketchLine_28 = Sketch_4.addLine(0, 0, 3.975000000000001, 0)
+SketchLine_28.setName("SketchLine_27")
+SketchLine_28.result().setName("SketchLine_27")
+SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[Extrusion_3_4/Generated_Edge&Sketch_3/SketchLine_20_EndVertex]e[Extrusion_3_4/To_Edge]e"))
+SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchPoint_4.result())
+SketchLine_29 = Sketch_4.addLine(3.975000000000001, 0, 3.975000000000001, 0.95)
+SketchLine_29.setName("SketchLine_28")
+SketchLine_29.result().setName("SketchLine_28")
+SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
+SketchPoint_5 = Sketch_4.addPoint(model.selection("VERTEX", "[Extrusion_3_5/Generated_Edge&Sketch_3/SketchLine_21_EndVertex]e[Extrusion_3_5/To_Edge]e"))
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchPoint_5.result())
+model.do()
+Edge_2_objects = [model.selection("EDGE", "Sketch_4/SketchLine_26"), model.selection("EDGE", "Sketch_4/SketchLine_27"), model.selection("EDGE", "Sketch_4/SketchLine_28")]
+Edge_2 = model.addEdge(Part_1_doc, Edge_2_objects)
+Extrusion_4_objects = [model.selection("EDGE", "Edge_2_1"), model.selection("EDGE", "Edge_2_2"), model.selection("EDGE", "Edge_2_3")]
+Extrusion_4 = model.addExtrusion(Part_1_doc, Extrusion_4_objects, model.selection("EDGE", "PartSet/OZ"), "h_apres_ouverture-ep_dalles/2", 0)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("VERTEX", "[Extrusion_4_1/Generated_Edge&Sketch_4/SketchLine_26_StartVertex]e[Extrusion_4_1/To_Edge]e"), model.selection("VERTEX", "[Extrusion_4_1/Generated_Edge&Sketch_4/SketchLine_26_EndVertex]e[Extrusion_4_1/To_Edge]e"), model.selection("VERTEX", "[Extrusion_4_2/Generated_Edge&Sketch_4/SketchLine_27_EndVertex]e[Extrusion_4_2/To_Edge]e"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
+SketchLine_30 = Sketch_5.addLine(0, 2.950000000000001, 0, 0)
+SketchLine_30.setName("SketchLine_29")
+SketchLine_30.result().setName("SketchLine_29")
+SketchPoint_6 = Sketch_5.addPoint(model.selection("VERTEX", "[Extrusion_4_1/Generated_Edge&Sketch_4/SketchLine_26_StartVertex]e[Extrusion_4_1/To_Edge]e"))
+SketchConstraintCoincidence_28 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchPoint_6.result())
+SketchPoint_7 = Sketch_5.addPoint(model.selection("VERTEX", "[Extrusion_4_1/Generated_Edge&Sketch_4/SketchLine_26_EndVertex]e[Extrusion_4_1/To_Edge]e"))
+SketchConstraintCoincidence_29 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchPoint_7.result())
+SketchLine_31 = Sketch_5.addLine(0, 0, 3.975000000000001, 0)
+SketchLine_31.setName("SketchLine_30")
+SketchLine_31.result().setName("SketchLine_30")
+SketchConstraintCoincidence_30 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchPoint_8 = Sketch_5.addPoint(model.selection("VERTEX", "[Extrusion_4_2/Generated_Edge&Sketch_4/SketchLine_27_EndVertex]e[Extrusion_4_2/To_Edge]e"))
+SketchConstraintCoincidence_31 = Sketch_5.setCoincident(SketchLine_31.endPoint(), SketchPoint_8.result())
+SketchLine_32 = Sketch_5.addLine(3.975000000000001, 0, 3.975000000000001, 0.95)
+SketchLine_32.setName("SketchLine_31")
+SketchLine_32.result().setName("SketchLine_31")
+SketchConstraintCoincidence_32 = Sketch_5.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
+SketchPoint_9 = Sketch_5.addPoint(model.selection("VERTEX", "[Extrusion_4_3/Generated_Edge&Sketch_4/SketchLine_28_EndVertex]e[Extrusion_4_3/To_Edge]e"))
+SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchLine_32.endPoint(), SketchPoint_9.result())
+SketchLine_33 = Sketch_5.addLine(3.975000000000001, 0.95, 0, 2.950000000000001)
+SketchLine_33.setName("SketchLine_32")
+SketchLine_33.result().setName("SketchLine_32")
+SketchConstraintCoincidence_34 = Sketch_5.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_35 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchLine_33.endPoint())
+SketchConstraintCoincidence_36 = Sketch_5.setCoincident(SketchPoint_6.coordinates(), SketchLine_33.endPoint())
+SketchLine_34 = Sketch_5.addLine(1.85, 2.019182389937107, 1.85, 0)
+SketchLine_34.setName("SketchLine_33")
+SketchLine_34.result().setName("SketchLine_33")
+SketchConstraintCoincidence_37 = Sketch_5.setCoincident(SketchLine_34.startPoint(), SketchLine_33.result())
+SketchLine_35 = Sketch_5.addLine(2.075000000000001, 1.905974842767296, 2.075000000000001, 0)
+SketchLine_35.setName("SketchLine_34")
+SketchLine_35.result().setName("SketchLine_34")
+SketchConstraintCoincidence_38 = Sketch_5.setCoincident(SketchLine_35.startPoint(), SketchLine_33.result())
+SketchConstraintCoincidence_39 = Sketch_5.setCoincident(SketchLine_35.endPoint(), SketchLine_31.result())
+SketchConstraintCoincidence_40 = Sketch_5.setCoincident(SketchLine_34.endPoint(), SketchLine_31.result())
+SketchConstraintVertical_8 = Sketch_5.setVertical(SketchLine_34.result())
+SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_35.result())
+SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_34.startPoint(), SketchLine_30.result(), "1.8+ep_voiles/2", False)
+SketchConstraintDistance_10.setName("SketchConstraintDistance_10")
+SketchConstraintDistance_11 = Sketch_5.setDistance(SketchLine_35.startPoint(), SketchLine_32.result(), "1.85+ep_voiles/2", False)
+SketchConstraintDistance_11.setName("SketchConstraintDistance_11")
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_29r-SketchLine_30f-SketchLine_33r-SketchLine_32f_wire")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_34f_wire")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_30f-SketchLine_34r-SketchLine_32f-SketchLine_33f_wire")])
+Translation_1_objects = [model.selection("FACE", "Extrusion_4_3"), model.selection("FACE", "Extrusion_3_3"), model.selection("FACE", "Extrusion_4_2"), model.selection("FACE", "Extrusion_3_5"), model.selection("FACE", "Extrusion_3_4"), model.selection("FACE", "Extrusion_3_2"), model.selection("FACE", "Extrusion_4_1"), model.selection("FACE", "Extrusion_3_1"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_2_1")]
+Translation_1 = model.addTranslation(Part_1_doc, Translation_1_objects, model.selection("EDGE", "PartSet/OZ"), "h_ouverture+h_apres_ouverture-ep_dalles/2")
+Recover_1_objects = [Face_2.result(), Face_3.result(), Face_1.result(), Extrusion_3.result(), Extrusion_4.result(), Extrusion_3.results()[1], Extrusion_3.results()[3], Extrusion_3.results()[4], Extrusion_4.results()[1], Extrusion_3.results()[2], Extrusion_4.results()[2]]
+Recover_1 = model.addRecover(Part_1_doc, Translation_1, Recover_1_objects)
+Translation_2_objects = [model.selection("FACE", "Recover_1_2"), model.selection("FACE", "Recover_1_5"), model.selection("FACE", "Recover_1_3"), model.selection("FACE", "Recover_1_4"), model.selection("FACE", "Recover_1_1"), model.selection("FACE", "Recover_1_6"), model.selection("FACE", "Recover_1_8"), model.selection("FACE", "Recover_1_7"), model.selection("FACE", "Recover_1_11"), model.selection("FACE", "Recover_1_10"), model.selection("FACE", "Recover_1_9")]
+Translation_2 = model.addTranslation(Part_1_doc, Translation_2_objects, model.selection("EDGE", "PartSet/OZ"), "2*(h_ouverture+h_apres_ouverture-ep_dalles/2)")
+Recover_2_objects = [Recover_1.results()[8], Recover_1.results()[9], Recover_1.results()[10], Recover_1.results()[6], Recover_1.results()[7], Recover_1.results()[5], Recover_1.result(), Recover_1.results()[3], Recover_1.results()[2], Recover_1.results()[4], Recover_1.results()[1]]
+Recover_2 = model.addRecover(Part_1_doc, Translation_2, Recover_2_objects)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_2/SketchPoint_1")])
+Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1")], model.selection("EDGE", "PartSet/OZ"), model.selection("FACE", "Translation_2_11"), 0, model.selection(), 0)
+Partition_1_objects = [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("FACE", "Translation_1_1"), model.selection("FACE", "Translation_1_2"), model.selection("FACE", "Translation_1_3"), model.selection("FACE", "Translation_1_4"), model.selection("FACE", "Translation_1_5"), model.selection("FACE", "Translation_1_6"), model.selection("FACE", "Translation_1_7"), model.selection("FACE", "Translation_1_8"), model.selection("FACE", "Translation_1_9"), model.selection("FACE", "Translation_1_10"), model.selection("FACE", "Translation_1_11"), model.selection("FACE", "Translation_2_1"), model.selection("FACE", "Translation_2_2"), model.selection("FACE", "Translation_2_3"), model.selection("FACE", "Translation_2_4"), model.selection("FACE", "Translation_2_5"), model.selection("FACE", "Translation_2_6"), model.selection("FACE", "Translation_2_7"), model.selection("FACE", "Translation_2_8"), model.selection("FACE", "Translation_2_9"), model.selection("FACE", "Translation_2_10"), model.selection("FACE", "Translation_2_11"), model.selection("FACE", "Recover_2_1"), model.selection("FACE", "Recover_2_2"), model.selection("FACE", "Recover_2_3"), model.selection("FACE", "Recover_2_4"), model.selection("FACE", "Recover_2_5"), model.selection("FACE", "Recover_2_6"), model.selection("FACE", "Recover_2_7"), model.selection("FACE", "Recover_2_8"), model.selection("FACE", "Recover_2_9"), model.selection("FACE", "Recover_2_10"), model.selection("FACE", "Recover_2_11"), model.selection("EDGE", "Extrusion_5_1")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
+model.testHaveNamingSubshapes(Partition_1, model, Part_1_doc)
+model.do()
+# insert points and polyline before partition to add it as a Partition argument
+Part_1_doc.setCurrentFeature(Extrusion_5.feature(), True)
+Point_2 = model.addPoint(Part_1_doc, "0", "0", "3*(h_ouverture+h_apres_ouverture-ep_dalles/2)")
+Point_3 = model.addPoint(Part_1_doc, 0, 0, 5)
+Polyline_1 = model.addPolyline3D(Part_1_doc, [model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Point_2")], False)
+model.do()
+Part_1_doc.setCurrentFeature(Partition_1.feature(), True)
+# append the polyline argument to the end of selection partition list
+Partition_1_objects.append(model.selection("WIRE", "Polyline_1_1"))
+Partition_1.setBase(Partition_1_objects)
+model.end()
+
+# check all groups are valid
+from ModelAPI import *
+aFactory = ModelAPI_Session.get().validators()
+assert(Part_1_doc.size("Groups") == 3)
+for i in range(Part_1_doc.size("Groups")):
+ GroupFeature = Part_1_doc.feature(objectToResult(Part_1_doc.object("Groups", i)))
+ assert(aFactory.validate(GroupFeature))
