# -*- coding: utf-8 -*-
+
+import sys
import salome
+salome.salome_init()
+theStudy = salome.myStudy
+
+###
+### GEOM component
+###
+
import GEOM
from salome.geom import geomBuilder
+ geompy = geomBuilder.New()
+
import math
+import SALOMEDS
-area_tolerance = 0.1
-nb_faces_tolerance = 20
-## Return the min and max areas of a mesh
-def getMinMaxArea(mesh):
- mini, maxi = mesh.GetMinMax(SMESH.FT_Area)
- return mini, maxi
+geompy = geomBuilder.New(theStudy)
+
+h = 5
O = geompy.MakeVertex(0, 0, 0)
OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-Face_1 = geompy.MakeFaceHW(10, 10, 1)
-geomObj_1 = geompy.MakeMarker(0, 0, 0, 1, 0, 0, 0, 1, 0)
-Sketch_1 = geompy.MakeSketcherOnPlane("Sketcher:F -2.5209155082703 -1.4416453838348:TT -1.1105282306671 -2.9872753620148:TT 0.76354801654816 -2.3303825855255:TT 1.9614112377167 -3.0838770866394:TT 3.8354876041412 -1.2677619457245:TT 4.2218952178955 0.644955098629:TT 3.2751967906952 2.5576722621918:TT 0.58966463804245 3.5430111885071:TT -3.7380990982056 3.2338852882385:TT -4.433632850647 0.85747921466827:WW", Face_1 )
-vertices = geompy.ExtractShapes(Sketch_1, geompy.ShapeType["VERTEX"], True)
-Curve_1 = geompy.MakeInterpol(vertices, True, True)
-
-p_small = geompy.MakeVertexOnCurve(Curve_1, 0.001)
-geompy.addToStudy(p_small, "p_small")
-
-p_small2 = geompy.MakeVertexOnCurve(Curve_1, 0.5)
-geompy.addToStudy(p_small2, "p_small2")
-
-p_small3 = geompy.MakeVertexOnCurve(Curve_1, 0.501)
-geompy.addToStudy(p_small3, "p_small3")
-
-part = geompy.MakePartition([Face_1], [Curve_1, p_small, p_small2, p_small3], Limit=geompy.ShapeType["FACE"])
-geompy.addToStudy(part, "part")
-
-Vx = geompy.MakeVectorDXDYDZ(1, 0, 0)
-Vy = geompy.MakeVectorDXDYDZ(0, 1, 0)
-Vz = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-p1 = geompy.MakeVertex(-5, -5, 0)
-p2 = geompy.MakeVertex(5, 5, 0)
-left_edges = geompy.GetShapesOnPlaneWithLocation(part, geompy.ShapeType["EDGE"], Vx, p1, GEOM.ST_ON)
-left = geompy.CreateGroup(part, geompy.ShapeType["EDGE"])
-geompy.UnionList(left, left_edges)
-geompy.addToStudyInFather(part, left, "left")
-
-right_edges = geompy.GetShapesOnPlaneWithLocation(part, geompy.ShapeType["EDGE"], Vx, p2, GEOM.ST_ON)
-right = geompy.CreateGroup(part, geompy.ShapeType["EDGE"])
-geompy.UnionList(right, right_edges)
-geompy.addToStudyInFather(part, right, "right")
-
-bottom_edges = geompy.GetShapesOnPlaneWithLocation(part, geompy.ShapeType["EDGE"], Vy, p1, GEOM.ST_ON)
-bottom = geompy.CreateGroup(part, geompy.ShapeType["EDGE"])
-geompy.UnionList(bottom, bottom_edges)
-geompy.addToStudyInFather(part, bottom, "bottom")
-
-top_edges = geompy.GetShapesOnPlaneWithLocation(part, geompy.ShapeType["EDGE"], Vy, p2, GEOM.ST_ON)
-top = geompy.CreateGroup(part, geompy.ShapeType["EDGE"])
-geompy.UnionList(top, top_edges)
-geompy.addToStudyInFather(part, top, "top")
-
-faces = geompy.SubShapeAll(part, geompy.ShapeType["FACE"])
-sub_shapes = []
-for i, face in enumerate(faces):
- geompy.addToStudyInFather(part, face, "face_%i"%(i+1))
- sub_shapes.append(face)
-
-# Mesh
-# ====
-
-import SMESH
+Cylinder_1 = geompy.MakeCylinderRH(1, h)
+Sphere_1 = geompy.MakeSphereR(1.5)
+Translation_1 = geompy.MakeTranslation(Sphere_1, 0, 0, h)
+Fuse_1 = geompy.MakeFuseList([Cylinder_1, Sphere_1, Translation_1], False, True)
+geompy.addToStudy( O, 'O' )
+geompy.addToStudy( OX, 'OX' )
+geompy.addToStudy( OY, 'OY' )
+geompy.addToStudy( OZ, 'OZ' )
+geompy.addToStudy( Cylinder_1, 'Cylinder_1' )
+geompy.addToStudy( Sphere_1, 'Sphere_1' )
+geompy.addToStudy( Translation_1, 'Translation_1' )
+geompy.addToStudy( Fuse_1, 'Fuse_1' )
+
+###
+### SMESH component
+###
+
+import SMESH, SALOMEDS
from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-# Test gradation with quadrangles
-Mesh_1 = smesh.Mesh(part, "Mesh")
-
-algo2d = Mesh_1.Triangle(algo=smeshBuilder.BLSURF)
-params = algo2d.Parameters()
-params.SetGeometricMesh( 1 )
-params.SetAngleMesh( 4 )
-params.SetPhySize( 8 )
-algo2d.SetGradation(1.05)
-params.SetElementType( True )
-
-ok = Mesh_1.Compute()
-
-if not ok:
- raise Exception("Error when computing Mesh_1")
-
-# Check the areas of Mesh_1
-mini_1, maxi_1 = getMinMaxArea(Mesh_1)
-mini_1_ref = 0.00197
-maxi_1_ref = 0.530
-
-if abs(mini_1-mini_1_ref) > area_tolerance:
- raise Exception("Min area of Mesh_1 incorrect")
-
-if maxi_1 > maxi_1_ref:
- raise Exception("Max area of Mesh_1 incorrect")
-
-# Check the number of faces of Mesh_1
-nb_faces_1 = Mesh_1.NbFaces()
-nb_faces_1_ref = 1208
-if nb_faces_1 < nb_faces_1_ref:
- raise Exception("Number of faces of Mesh_1 incorrect")
+from salome.BLSURFPlugin import BLSURFPluginBuilder
- smesh = smeshBuilder.New(theStudy)
++smesh = smeshBuilder.New()
-# Test no gradation with quadrangles and anisotropy
-# RQ: this kind of mesh is not suitable for simulation
-# but gives a coarse mesh like a stl geometry
-Mesh_2 = smesh.Mesh(part, "Mesh")
-
-algo2d = Mesh_2.Triangle(algo=smeshBuilder.BLSURF)
-params = algo2d.Parameters()
-params.SetGeometricMesh( 1 )
-params.SetAngleMesh( 4 )
-params.SetPhySize( 8 )
-algo2d.SetGradation(1.05)
-params.SetElementType( 1 )
-params.SetAnisotropic(True)
-
-ok = Mesh_2.Compute()
-
-if not ok:
- raise Exception("Error when computing Mesh_2")
-
-# Check the areas of Mesh_2
-mini_2, maxi_2 = getMinMaxArea(Mesh_2)
-mini_2_ref = 0.000408
-maxi_2_ref = 10.1982
-
-if abs(mini_2-mini_2_ref) > area_tolerance:
- raise Exception("Min area of Mesh_2 incorrect")
-
-if abs(maxi_2-maxi_2_ref) > area_tolerance:
- raise Exception("Max area of Mesh_2 incorrect")
-
-# Check the number of faces of Mesh_2
-nb_faces_2 = Mesh_2.NbFaces()
-nb_faces_2_ref = 121
-if abs(nb_faces_2-nb_faces_2_ref) > nb_faces_tolerance:
- raise Exception("Number of faces of Mesh_2 incorrect")
+# First mesh with quadrangle-dominant gradation
+Mesh_1 = smesh.Mesh(Fuse_1, "Mesh_1")
+MG_CADSurf = Mesh_1.Triangle(algo=smeshBuilder.MG_CADSurf)
+MG_CADSurf_Parameters_1 = MG_CADSurf.Parameters()
+MG_CADSurf_Parameters_1.SetElementType( BLSURFPluginBuilder.QuadrangleDominant )
+MG_CADSurf_Parameters_1.SetPhySize( 1 )
+MG_CADSurf_Parameters_1.SetMaxSize( 1 )
+MG_CADSurf_Parameters_1.SetGradation( 1.05 )
+MG_CADSurf_Parameters_1.SetAngleMesh( 4 )
+isDone = Mesh_1.Compute()
+
+min_1, max_1 = Mesh_1.GetMinMax(SMESH.FT_Area)
+
+# Check that min and max areas are not too far
+assert max_1/min_1 < 6
+
+# Second mesh with anisotropy (which disable gradation)
+Mesh_2 = smesh.Mesh(Fuse_1, "Mesh_2")
+MG_CADSurf = Mesh_2.Triangle(algo=smeshBuilder.MG_CADSurf)
+MG_CADSurf_Parameters_2 = MG_CADSurf.Parameters()
+MG_CADSurf_Parameters_2.SetElementType( BLSURFPluginBuilder.QuadrangleDominant )
+MG_CADSurf_Parameters_2.SetPhySize( 1 )
+MG_CADSurf_Parameters_2.SetMaxSize( 1 )
+MG_CADSurf_Parameters_2.SetGradation( 1.05 )
+MG_CADSurf_Parameters_2.SetAngleMesh( 4 )
+MG_CADSurf_Parameters_2.SetAnisotropic( True )
+isDone = Mesh_2.Compute()
+
+min_2, max_2 = Mesh_2.GetMinMax(SMESH.FT_Area)
+
+# Check that min and max ration increase with anisotropy
+assert max_2/min_2 > 20
if salome.sg.hasDesktop():
- salome.sg.updateObjBrowser(True)
+ salome.sg.updateObjBrowser()
+
+
