Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r")])
Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_1")])
Group_1 = model.addGroup(Part_1_doc, "Edges", [model.selection("EDGE", "Edge_1_1")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("EDGE", "Edge_1_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("EDGE", "Edge_1_1")], keepSubResults = True)
model.do()
# move group after the partition
Part_1_doc.moveFeature(Group_1.feature(), Partition_1.feature())
SketchConstraintCoincidence_6 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_3.center())
SketchConstraintRadius_3 = Sketch_3.setRadius(SketchCircle_3.results()[1], 5)
ExtrusionCut_1.setNestedSketch(Sketch_3)
-Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_1_1"), model.selection("SOLID", "ExtrusionCut_1_2")], True, 20190506)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_1_1"), model.selection("SOLID", "ExtrusionCut_1_2")], True, keepSubResults = True)
model.do()
# move groups after the final fuse
Part_1_doc.moveFeature(Group_1.feature(), Fuse_1.feature())
%include "typemaps.i"
%include "std_shared_ptr.i"
+// functions with named parameters
+%feature("kwargs") addCommon;
+%feature("kwargs") addCut;
+%feature("kwargs") addFuse;
+%feature("kwargs") addPartition;
+%feature("kwargs") addSplit;
+%feature("kwargs") addSmash;
+%feature("kwargs") addUnion;
+
// shared pointers
%shared_ptr(FeaturesAPI_BooleanCut)
%shared_ptr(FeaturesAPI_BooleanFuse)
%shared_ptr(FeaturesAPI_FusionFaces)
%shared_ptr(FeaturesAPI_RemoveResults)
+
+%typecheck(SWIG_TYPECHECK_POINTER) std::pair<std::list<ModelHighAPI_Selection>, bool>, const std::pair<std::list<ModelHighAPI_Selection>, bool> & {
+ ModelHighAPI_Selection* temp_selection;
+ bool* temp_bool;
+ int newmem = 0;
+ $1 = 1;
+ std::list<PyObject*> temp_inputlist;
+ if (PySequence_Check($input)) {
+ for (Py_ssize_t i = 0; i < PySequence_Size($input) && $1; ++i) {
+ PyObject * temp = PySequence_GetItem($input, i);
+
+ if ((SWIG_ConvertPtrAndOwn(temp, (void **)&temp_selection, $descriptor(ModelHighAPI_Selection*), SWIG_POINTER_EXCEPTION, &newmem)) == 0) {
+ if (temp_selection) {
+ $1 = 1;
+ } else {
+ $1 = 0;
+ }
+ } else {
+ $1 = 0;
+ }
+ }
+ } else if (PyBool_Check($input)) {
+ $1 = 1;
+ } else {
+ $1 = 0;
+ }
+}
+
+%typemap(in) const std::pair<std::list<ModelHighAPI_Selection>, bool> & (std::pair<std::list<ModelHighAPI_Selection>, bool> temp) {
+ ModelHighAPI_Selection* temp_selection;
+ std::list<ModelHighAPI_Selection> temp_selectionlist;
+ int newmem = 0;
+ std::list<PyObject*> temp_inputlist;
+ if (PySequence_Check($input)) {
+ for (Py_ssize_t i = 0; i < PySequence_Size($input); ++i) {
+ PyObject * temp = PySequence_GetItem($input, i);
+
+ if ((SWIG_ConvertPtrAndOwn(temp, (void **)&temp_selection, $descriptor(ModelHighAPI_Selection*), SWIG_POINTER_EXCEPTION, &newmem)) == 0) {
+ if (temp_selection) {
+ temp_selectionlist.push_back(*temp_selection);
+ if (newmem & SWIG_CAST_NEW_MEMORY) {
+ delete temp_selection;
+ }
+ }
+ } else {
+ PyErr_SetString(PyExc_TypeError, "argument must be ModelHighAPI_Selection.");
+ return NULL;
+ }
+ }
+ temp = std::pair<std::list<ModelHighAPI_Selection>, bool>(temp_selectionlist, false);
+ } else if (PyBool_Check($input)) {
+ temp = std::pair<std::list<ModelHighAPI_Selection>, bool>(std::list<ModelHighAPI_Selection>(), $input == Py_True);
+ } else {
+ PyErr_SetString(PyExc_TypeError, "argument must be std::list<ModelHighAPI_Selection> or bool.");
+ return NULL;
+ }
+ $1 = &temp;
+}
+
+// fix compilation error: 'res*' was not declared in this scope
+%typemap(freearg) const std::pair<std::list<ModelHighAPI_Selection>, bool> & {}
+
// all supported interfaces
%include "FeaturesAPI_BooleanCut.h"
%include "FeaturesAPI_BooleanFuse.h"
theDumper << ", " << aTools;
}
- if (aVersion && aVersion->isInitialized()) {
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1) {
+ theDumper << ", keepSubResults = True";
}
theDumper << ")" << std::endl;
}
//==================================================================================================
-BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const int theVersion)
+static BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theMainObjects,
+ const int theVersion)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanCommon::ID());
return BooleanCommonPtr(new FeaturesAPI_BooleanCommon(aFeature, theMainObjects, theVersion));
}
//==================================================================================================
-BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion)
+static BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theMainObjects,
+ const std::list<ModelHighAPI_Selection>& theToolObjects,
+ const int theVersion)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanCommon::ID());
return BooleanCommonPtr(new FeaturesAPI_BooleanCommon(aFeature,
theToolObjects,
theVersion));
}
+
+//==================================================================================================
+BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theMainObjects,
+ const std::list<ModelHighAPI_Selection>& theToolObjects,
+ const bool keepSubResults)
+{
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
+ return theToolObjects.empty() ? addCommon(thePart, theMainObjects, aVersion)
+ : addCommon(thePart, theMainObjects, theToolObjects, aVersion);
+}
/// \ingroup CPPHighAPI
/// \brief Create Boolean Common feature.
-FEATURESAPI_EXPORT
-BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const int theVersion = 0);
-
-/// \ingroup CPPHighAPI
-/// \brief Create Boolean Common feature.
-FEATURESAPI_EXPORT
-BooleanCommonPtr addCommon(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion = 0);
+FEATURESAPI_EXPORT BooleanCommonPtr addCommon(
+ const std::shared_ptr<ModelAPI_Document>& part,
+ const std::list<ModelHighAPI_Selection>& objects,
+ const std::list<ModelHighAPI_Selection>& tools = std::list<ModelHighAPI_Selection>(),
+ const bool keepSubResults = false);
#endif // FeaturesAPI_BooleanCommon_H_
theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools;
- if (aVersion && aVersion->isInitialized())
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1)
+ theDumper << ", keepSubResults = True";
theDumper << ")" << std::endl;
}
BooleanCutPtr addCut(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion)
+ const bool keepSubResults)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanCut::ID());
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
return BooleanCutPtr(new FeaturesAPI_BooleanCut(aFeature,
theMainObjects,
theToolObjects,
- theVersion));
+ aVersion));
}
BooleanCutPtr addCut(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion = 0);
+ const bool keepSubResults = false);
#endif // FeaturesAPI_BooleanCut_H_
theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools;
- if (aVersion && aVersion->isInitialized())
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1)
+ theDumper << ", keepSubResults = True";
theDumper << ")" << std::endl;
}
BooleanFillPtr addSplit(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion)
+ const bool keepSubResults)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanFill::ID());
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
return BooleanFillPtr(new FeaturesAPI_BooleanFill(aFeature,
theMainObjects,
theToolObjects,
- theVersion));
+ aVersion));
}
BooleanFillPtr addSplit(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion = 0);
+ const bool keepSubResults = false);
#endif // FeaturesAPI_BooleanFill_H_
theDumper << ", " << aTools;
}
- bool hasVersion = aVersion && aVersion->isInitialized();
- if (aRemoveEdges->value() || hasVersion) {
- theDumper << ", " << aRemoveEdges->value();
+ if (aRemoveEdges->value()) {
+ theDumper << ", removeEdges = True";
}
- if (hasVersion) {
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1) {
+ theDumper << ", keepSubResults = True";
}
theDumper << ")" << std::endl;
}
//==================================================================================================
-BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theObjects,
- const bool theRemoveEdges,
- const int theVersion)
+static BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theObjects,
+ const bool theRemoveEdges,
+ const int theVersion)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanFuse::ID());
return BooleanFusePtr(new FeaturesAPI_BooleanFuse(aFeature,
}
//==================================================================================================
-BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const std::list<ModelHighAPI_Selection>& theToolObjects,
- const bool theRemoveEdges,
- const int theVersion)
+static BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theMainObjects,
+ const std::list<ModelHighAPI_Selection>& theToolObjects,
+ const bool theRemoveEdges,
+ const int theVersion)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanFuse::ID());
return BooleanFusePtr(new FeaturesAPI_BooleanFuse(aFeature,
theRemoveEdges,
theVersion));
}
+
+//==================================================================================================
+BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
+ const std::list<ModelHighAPI_Selection>& theMainObjects,
+ const std::pair<std::list<ModelHighAPI_Selection>, bool>& theToolObjects,
+ const bool theRemoveEdges,
+ const bool keepSubResults)
+{
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
+ bool aRemoveEdges = theRemoveEdges;
+ if (theToolObjects.first.empty())
+ aRemoveEdges = aRemoveEdges || theToolObjects.second;
+ return theToolObjects.first.empty() ?
+ addFuse(thePart, theMainObjects, aRemoveEdges, aVersion) :
+ addFuse(thePart, theMainObjects, theToolObjects.first, aRemoveEdges, aVersion);
+}
/// Pointer on Boolean object.
typedef std::shared_ptr<FeaturesAPI_BooleanFuse> BooleanFusePtr;
-/// \ingroup CPPHighAPI
-/// \brief Create Boolean Fuse feature.
-FEATURESAPI_EXPORT
-BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theObjects,
- const bool theRemoveEdges = false,
- const int theVersion = 0);
+#define DUMMY_TOOLS std::pair<std::list<ModelHighAPI_Selection>, bool>\
+ (std::list<ModelHighAPI_Selection>(), false)
/// \ingroup CPPHighAPI
/// \brief Create Boolean Fuse feature.
-FEATURESAPI_EXPORT
-BooleanFusePtr addFuse(const std::shared_ptr<ModelAPI_Document>& thePart,
- const std::list<ModelHighAPI_Selection>& theMainObjects,
- const std::list<ModelHighAPI_Selection>& theToolObjects,
- const bool theRemoveEdges = false,
- const int theVersion = 0);
+FEATURESAPI_EXPORT BooleanFusePtr addFuse(
+ const std::shared_ptr<ModelAPI_Document>& part,
+ const std::list<ModelHighAPI_Selection>& objects,
+ const std::pair<std::list<ModelHighAPI_Selection>, bool>& tools = DUMMY_TOOLS,
+ const bool removeEdges = false,
+ const bool keepSubResults = false);
#endif // FeaturesAPI_BooleanFuse_H_
theDumper << "(" << aDocName << ", " << anObjects << ", " << aTools;
- if (aVersion && aVersion->isInitialized())
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1)
+ theDumper << ", keepSubResults = True";
theDumper << ")" << std::endl;
}
BooleanSmashPtr addSmash(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion)
+ const bool keepSubResults)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_BooleanSmash::ID());
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
return BooleanSmashPtr(new FeaturesAPI_BooleanSmash(aFeature,
theMainObjects,
theToolObjects,
- theVersion));
+ aVersion));
}
BooleanSmashPtr addSmash(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theMainObjects,
const std::list<ModelHighAPI_Selection>& theToolObjects,
- const int theVersion = 0);
+ const bool keepSubResults = false);
#endif // FeaturesAPI_BooleanSmash_H_
theDumper << aBase << " = model.addPartition(" << aDocName << ", " << anAttrObjects;
- if (aVersion && aVersion->isInitialized())
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1)
+ theDumper << ", keepSubResults = True";
theDumper << ")" << std::endl;
}
//==================================================================================================
PartitionPtr addPartition(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theBaseObjects,
- const int theVersion)
+ const bool keepSubResults)
{
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Partition::ID());
- return PartitionPtr(new FeaturesAPI_Partition(aFeature, theBaseObjects, theVersion));
+ return PartitionPtr(new FeaturesAPI_Partition(aFeature, theBaseObjects, aVersion));
}
FEATURESAPI_EXPORT
PartitionPtr addPartition(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theBaseObjects,
- const int theVersion = 0);
+ const bool keepSubResults = false);
#endif // FeaturesAPI_Partition_H_
theDumper << aBase << " = model.addUnion(" << aDocName << ", " << anAttrObjects;
- if (aVersion && aVersion->isInitialized())
- theDumper << ", " << aVersion->value();
+ if (aVersion && aVersion->isInitialized() &&
+ aVersion->value() == FeaturesPlugin_VersionedBoolean::THE_VERSION_1)
+ theDumper << ", keepSubResults = True";
theDumper << ")" << std::endl;
}
//==================================================================================================
UnionPtr addUnion(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theBaseObjects,
- const int theVersion)
+ const bool keepSubResults)
{
+ int aVersion = keepSubResults ? FeaturesPlugin_VersionedBoolean::THE_VERSION_1
+ : FeaturesPlugin_VersionedBoolean::THE_VERSION_0;
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Union::ID());
- return UnionPtr(new FeaturesAPI_Union(aFeature, theBaseObjects, theVersion));
+ return UnionPtr(new FeaturesAPI_Union(aFeature, theBaseObjects, aVersion));
}
FEATURESAPI_EXPORT
UnionPtr addUnion(const std::shared_ptr<ModelAPI_Document>& thePart,
const std::list<ModelHighAPI_Selection>& theBaseObjects,
- const int theVersion = 0);
+ const bool keepSubResults = false);
#endif // FeaturesAPI_Union_H_
#include <GeomAlgoAPI_CompoundBuilder.h>
#include <GeomAlgoAPI_Tools.h>
-static const int THE_COMMON_VERSION_1 = 20190506;
-
//==================================================================================================
FeaturesPlugin_BooleanCommon::FeaturesPlugin_BooleanCommon()
: FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_COMMON)
data()->addAttribute(OBJECT_LIST_ID(), ModelAPI_AttributeSelectionList::typeId());
data()->addAttribute(TOOL_LIST_ID(), ModelAPI_AttributeSelectionList::typeId());
- initVersion(THE_COMMON_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
+ initVersion(THE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
}
//==================================================================================================
aMakeShapeList->appendAlgo(aCommonAlgo);
}
- if (aCommonVersion == THE_COMMON_VERSION_1) {
+ if (aCommonVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
// and append the result of the FUSE operation
aShape = keepUnusedSubsOfCompound(aShape, anObjects, aTools, aMakeShapeList);
aResultShapesList.push_back(aShape);
}
} else {
- if (aCommonVersion == THE_COMMON_VERSION_1) {
+ if (aCommonVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
aResultCompound =
keepUnusedSubsOfCompound(GeomShapePtr(), anObjects, aTools, aMakeShapeList);
#include <GeomAPI_ShapeExplorer.h>
#include <GeomAPI_ShapeIterator.h>
-static const int THE_CUT_VERSION_1 = 20190506;
-
//==================================================================================================
FeaturesPlugin_BooleanCut::FeaturesPlugin_BooleanCut()
: FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_CUT)
void FeaturesPlugin_BooleanCut::initAttributes()
{
FeaturesPlugin_Boolean::initAttributes();
- initVersion(THE_CUT_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
+ initVersion(THE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
}
//==================================================================================================
std::shared_ptr<GeomAlgoAPI_MakeShapeList> aMakeShapeList(new GeomAlgoAPI_MakeShapeList());
GeomShapePtr aResultCompound;
- if (aCutVersion == THE_CUT_VERSION_1) {
+ if (aCutVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
aResultCompound =
keepUnusedSubsOfCompound(GeomShapePtr(), anObjects, aTools, aMakeShapeList);
#include <algorithm>
#include <map>
-static const int THE_SPLIT_VERSION_1 = 20190506;
-
//=================================================================================================
FeaturesPlugin_BooleanFill::FeaturesPlugin_BooleanFill()
: FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_FILL)
void FeaturesPlugin_BooleanFill::initAttributes()
{
FeaturesPlugin_Boolean::initAttributes();
- initVersion(THE_SPLIT_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
+ initVersion(THE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
}
//=================================================================================================
std::shared_ptr<GeomAlgoAPI_MakeShapeList> aMakeShapeList(new GeomAlgoAPI_MakeShapeList());
GeomShapePtr aResultCompound;
- if (aSplitVersion == THE_SPLIT_VERSION_1) {
+ if (aSplitVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
aResultCompound =
keepUnusedSubsOfCompound(GeomShapePtr(), anObjects, aTools, aMakeShapeList);
#include <GeomAPI_ShapeExplorer.h>
#include <GeomAPI_ShapeIterator.h>
-static const int THE_FUSE_VERSION_1 = 20190506;
-
//==================================================================================================
FeaturesPlugin_BooleanFuse::FeaturesPlugin_BooleanFuse()
: FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_FUSE)
ModelAPI_Session::get()->validators()->registerNotObligatory(getKind(), OBJECT_LIST_ID());
ModelAPI_Session::get()->validators()->registerNotObligatory(getKind(), TOOL_LIST_ID());
- initVersion(THE_FUSE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
+ initVersion(THE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
}
//==================================================================================================
aMakeShapeList->appendAlgo(aUnifyAlgo);
}
- if (aFuseVersion == THE_FUSE_VERSION_1) {
+ if (aFuseVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
// and append the result of the FUSE operation
aShape = keepUnusedSubsOfCompound(aShape, anObjectsHierarchy, aToolsHierarchy, aMakeShapeList);
#include <GeomAPI_ShapeExplorer.h>
#include <GeomAPI_ShapeIterator.h>
-static const int THE_SMASH_VERSION_1 = 20190506;
-
//==================================================================================================
FeaturesPlugin_BooleanSmash::FeaturesPlugin_BooleanSmash()
: FeaturesPlugin_Boolean(FeaturesPlugin_Boolean::BOOL_SMASH)
data()->addAttribute(OBJECT_LIST_ID(), ModelAPI_AttributeSelectionList::typeId());
data()->addAttribute(TOOL_LIST_ID(), ModelAPI_AttributeSelectionList::typeId());
- initVersion(THE_SMASH_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
+ initVersion(THE_VERSION_1, selectionList(OBJECT_LIST_ID()), selectionList(TOOL_LIST_ID()));
}
//==================================================================================================
// take into account a version of SMASH feature
int aSmashVersion = version();
- if (aSmashVersion == THE_SMASH_VERSION_1) {
+ if (aSmashVersion == THE_VERSION_1) {
// merge hierarchies of compounds containing objects and tools
// and append the result of the FUSE operation
aShape = keepUnusedSubsOfCompound(aShape, anObjectsHistory, aToolsHistory, aMakeShapeList);
#include <list>
#include <sstream>
-static const int THE_PARTITION_VERSION_1 = 20190506;
-
//=================================================================================================
FeaturesPlugin_Partition::FeaturesPlugin_Partition()
void FeaturesPlugin_Partition::initAttributes()
{
data()->addAttribute(BASE_OBJECTS_ID(), ModelAPI_AttributeSelectionList::typeId());
- initVersion(THE_PARTITION_VERSION_1, selectionList(BASE_OBJECTS_ID()));
+ initVersion(THE_VERSION_1, selectionList(BASE_OBJECTS_ID()));
}
//=================================================================================================
int aResultIndex = 0;
int aPartitionVersion = version();
- if (aPartitionVersion < THE_PARTITION_VERSION_1) {
+ if (aPartitionVersion < THE_VERSION_1) {
// default behaviors of Partition
if(aResultShape->shapeType() == GeomAPI_Shape::COMPOUND) {
for(GeomAPI_ShapeIterator anIt(aResultShape); anIt.more(); anIt.next()) {
#include <ModelAPI_ResultBody.h>
#include <ModelAPI_Tools.h>
-static const int THE_UNION_VERSION_1 = 20190506;
-
//=================================================================================================
FeaturesPlugin_Union::FeaturesPlugin_Union()
{
void FeaturesPlugin_Union::initAttributes()
{
data()->addAttribute(BASE_OBJECTS_ID(), ModelAPI_AttributeSelectionList::typeId());
- initVersion(THE_UNION_VERSION_1, selectionList(BASE_OBJECTS_ID()));
+ initVersion(THE_VERSION_1, selectionList(BASE_OBJECTS_ID()));
}
//=================================================================================================
GeomShapePtr aShape;
GeomAPI_ShapeIterator aCIt(aResultCompound);
- if (aUnionVersion < THE_UNION_VERSION_1) {
+ if (aUnionVersion < THE_VERSION_1) {
// if the compound consists of a single sub-shape, take it,
// otherwise, take the full compound
aShape = aCIt.current();
class FeaturesPlugin_VersionedBoolean : public ModelAPI_Feature
{
public:
+ static const int THE_VERSION_0 = 0;
+ static const int THE_VERSION_1 = 20190506;
+
/// Attribute name of the version of Boolean feature
inline static const std::string& VERSION_ID()
{
Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_19r-SketchLine_18r-SketchLine_17r-SketchLine_16r-SketchLine_15r-SketchLine_20f-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f")], model.selection(), 10, 0)
Extrusion_3.result().setName("C")
Extrusion_3.result().setColor(0, 85, 255)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1"), model.selection("SOLID", "Compound_2_1_2")], [model.selection("SOLID", "C")], 20190506)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1"), model.selection("SOLID", "Compound_2_1_2")], [model.selection("SOLID", "C")], keepSubResults = True)
model.end()
from GeomAPI import GeomAPI_Shape
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_1")], model.selection(), "h", 0)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_4/To_Face"), "h/2", True)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_1"), model.selection("COMPOUND", "all-in-Extrusion_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_1"), model.selection("COMPOUND", "all-in-Extrusion_1")], keepSubResults = True)
model.end()
assert(Partition_1.feature().error() == "")
Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")], 20190506)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
Compound_3.result().subResult(1).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], 20190506)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_2.results()[1], 3)
model.do()
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 5, 5)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1_2")], [model.selection("SOLID", "Extrusion_2_1")], 20190506)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "LinearCopy_1_1_1_2")], [model.selection("SOLID", "Extrusion_2_1")], keepSubResults = True)
model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
Compound_3.result().subResult(1).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")], 20190506)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Cut_1, model, Part_1_doc)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
Fuse_1_objects_1 = [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "Compound_1_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")]
-Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, False, 20190506)
+Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, False, keepSubResults = True)
model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3)
Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")])
Fuse_1_objects_1 = [model.selection("SOLID", "Compound_1_1_1_1"), model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")]
-Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, True, 20190506)
+Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, True, keepSubResults = True)
model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")])
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3)
Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")])
-Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")], True, 20190506)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("FACE", "Compound_1_1_2")], True, keepSubResults = True)
model.end()
assert(Fuse_1.feature().error() != "")
Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/SketchLine_9")])
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OZ"), 13, 3)
Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Extrusion_2_1")])
-Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1")], False, 20190506)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Compound_1_1_1_1")], [model.selection("SOLID", "LinearCopy_2_1_1_1")], False, keepSubResults = True)
model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("SOLID", "Compound_1_1_2_1"), model.selection("SOLID", "Compound_1_1_2_2")], 20190506)
+Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("SOLID", "Compound_1_1_2_1"), model.selection("SOLID", "Compound_1_1_2_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc)
Compound_3.result().subResult(1).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")], 20190506)
+Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("SOLID", "Compound_3_1_2_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Smash_1, model, Part_1_doc)
Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")], 20190506)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1")], [model.selection("COMPOUND", "Compound_1_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
Compound_3.result().subResult(1).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], 20190506)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3")], [model.selection("COMPOUND", "Compound_3_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Partition_1, model, Part_1_doc)
Compound_3.result().subResult(1).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_3.result().subResult(1).subResult(1).setColor(0, 255, 0)
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3"), model.selection("COMPOUND", "Compound_3_1_2")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Compound_2_1_1_1"), model.selection("SOLID", "Compound_2_1_2_3"), model.selection("COMPOUND", "Compound_3_1_2")], keepSubResults = True)
model.testHaveNamingSubshapes(Partition_1, model, Part_1_doc)
Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
Partition_1_objects = [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "Compound_1_1_2_2"), model.selection("SOLID", "LinearCopy_2_1_2_2"), model.selection("SOLID", "Compound_1_1_1_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
model.do()
model.testNbResults(Partition_1, 1)
SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchCircle_1.center(), SketchLine_1.result())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection(), 100, 0)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_2_2")], [model.selection("SOLID", "Extrusion_1_1")], 20190506)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "LinearCopy_2_1_2_2")], [model.selection("SOLID", "Extrusion_1_1")], keepSubResults = True)
Recover_1 = model.addRecover(Part_1_doc, Cut_1, [LinearCopy_2.result()], True)
model.do()
model.end()
SketchCircle_1 = Sketch_2.addCircle(-4.420087352215441, 24.04732854606771, 12.87676926472621)
model.do()
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r_wire")], model.selection(), 20, 80)
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1_2")], [model.selection("SOLID", "Extrusion_2_1")], 20190506)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1_2")], [model.selection("SOLID", "Extrusion_2_1")], keepSubResults = True)
Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_1.result()], True)
model.end()
Box_1 = model.addBox(Part_1_doc, 100, 100, 100)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], -50, -50, -50)
Partition_1_objects = [model.selection("SOLID", "Translation_1_1"), model.selection("FACE", "PartSet/XOY"), model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
CompSolid_1_objects = [model.selection("SOLID", "Partition_1_1_1"), model.selection("SOLID", "Partition_1_1_5"), model.selection("SOLID", "Partition_1_1_6"), model.selection("SOLID", "Partition_1_1_8")]
CompSolid_1 = model.addCompSolid(Part_1_doc, CompSolid_1_objects)
Recover_1 = model.addRecover(Part_1_doc, CompSolid_1, [Partition_1.result()], True)
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchCircle_1_2")])
Partition_1_objects = [model.selection("FACE", "Face_1_1"), model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ")]
Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
-Union_1 = model.addUnion(Part_1_doc, [model.selection("FACE", "Partition_1_1_1"), model.selection("FACE", "Partition_1_1_2")], 20190506)
+Union_1 = model.addUnion(Part_1_doc, [model.selection("FACE", "Partition_1_1_1"), model.selection("FACE", "Partition_1_1_2")], keepSubResults = True)
model.do()
model.end()
Compound_1_objects = [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5"), model.selection("SOLID", "Extrusion_1_6"), model.selection("SOLID", "Extrusion_1_7"), model.selection("SOLID", "Extrusion_1_8"), model.selection("SOLID", "Extrusion_1_9")]
Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
Union_1_objects = [model.selection("SOLID", "Compound_1_1_1_1"), model.selection("SOLID", "Compound_1_1_1_2"), model.selection("SOLID", "Compound_1_1_1_3")]
-Union_1 = model.addUnion(Part_1_doc, Union_1_objects, 20190506)
+Union_1 = model.addUnion(Part_1_doc, Union_1_objects, keepSubResults = True)
model.testHaveNamingSubshapes(Union_1, model, Part_1_doc)
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "ExternalFaces")])
SketchConstraintDistance_4 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_3.result(), 8, True)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Face_1_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Face_1_1")], keepSubResults = True)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "ExternalFaces")])
model.end()
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "ExternalFaces", exclude = True)])
SketchConstraintDistance_4 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_3.result(), 8, True)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Face_1_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Face_1_1")], keepSubResults = True)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "ExternalFaces", exclude = True)])
model.end()
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
FilterFace = model.filters(Part_1_doc, [model.addFilter(name = "OnGeometry", args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Front"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Box_1_1/Front]")])])
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
FilterFace = model.filters(Part_1_doc, [model.addFilter(name = "OnGeometry", exclude = True, args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_1/Plane_1&Box_1_1/Front"), model.selection("EDGE", "[Partition_1_1_1/Modified_Face&Box_1_1/Top][Partition_1_1_1/Modified_Face&Box_1_1/Front]")])])
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
FilterFace = model.filters(Part_1_doc, [model.addFilter(name = "OnGeometry", exclude = True, args = [model.selection("FACE", "Partition_1_1_1/Modified_Face&Box_1_1/Top")])])
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
FilterFace = model.filters(Part_1_doc, [model.addFilter(name = "OnGeometry", args = [model.selection("FACE", "Partition_1_1_1/Modified_Face&Box_1_1/Top")])])
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
Part_1_doc = Part_1.document()
Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], 20190506)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1")], keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 20)
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), model.selection("EDGE", "PartSet/OY"), 30)
Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("EDGE", "PartSet/OZ"), 30)
Partition_1_objects = [model.selection("SOLID", "Translation_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2"), model.selection("FACE", "Plane_3")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "OppositeToEdge", args = [model.selection("EDGE", "Partition_1_1_7/Generated_Edge&Plane_2/Plane_2&Plane_1/Plane_1")])])
model.end()
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), model.selection("EDGE", "PartSet/OY"), 30)
Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("EDGE", "PartSet/OZ"), 30)
Partition_1_objects = [model.selection("SOLID", "Translation_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2"), model.selection("FACE", "Plane_3")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "OppositeToEdge", exclude = True, args = [model.selection("EDGE", "Partition_1_1_7/Generated_Edge&Plane_2/Plane_2&Plane_1/Plane_1")])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_2/Plane_2&Box_1_1/Top"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_2/Plane_2&Box_1_1/Top"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Cylinder_1_1/Face_3"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top][Partition_1_1_2/Modified_Face&Plane_1/Plane_1][Partition_1_1_2/Modified_Face&Plane_2/Plane_2]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Cylinder_1_1/Face_3"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_2/Plane_2&Box_1_1/Top"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "[Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "Partition_1_1_2/Generated_Edge&Plane_2/Plane_2&Box_1_1/Top"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("EDGE", "([Cylinder_1_1/Face_1][Cylinder_1_1/Face_2])([Cylinder_1_1/Face_1][Cylinder_1_1/Face_3])"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("FACE", "Cylinder_1_1/Face_3"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top][Partition_1_1_2/Modified_Face&Plane_1/Plane_1][Partition_1_1_2/Modified_Face&Plane_2/Plane_2]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", exclude = True, args = [model.selection("VERTEX", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Partition_1_1_3/Modified_Face&Box_1_1/Left"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Partition_1_1_2/Modified_Face&Box_1_1/Top"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("FACE", "Cylinder_1_1/Face_3"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top][Partition_1_1_2/Modified_Face&Plane_1/Plane_1][Partition_1_1_2/Modified_Face&Plane_2/Plane_2]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), True])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Partition_1_1_3/Modified_Face&Box_1_1/Top][Partition_1_1_3/Modified_Face&Box_1_1/Front][Partition_1_1_3/Modified_Face&Box_1_1/Left]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Partition_1_1_2/Modified_Face&Box_1_1/Top][Partition_1_1_2/Modified_Face&Plane_1/Plane_1][Partition_1_1_2/Modified_Face&Plane_2/Plane_2]"), False])])
model.end()
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), model.selection("FACE", "Box_1_1/Right"))
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Front"), model.selection("FACE", "Box_1_1/Back"))
Partition_1_objects = [model.selection("SOLID", "Box_1_1"), model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, 20190506)
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
Filters = model.filters(Part_1_doc, [model.addFilter(name = "TopoConnectedFaces", args = [model.selection("VERTEX", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]"), False])])
model.end()