Issue #2146 : new big models for nightly tests

diff --git a/test.models/piece_02.py b/test.models/piece_02.py
new file mode 100644 (file)
index 0000000..8ee8265
--- /dev/null
+++ b/test.models/piece_02.py
@@ -0,0 +1,573 @@
+# -*- coding: utf-8 -*-
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(0, 4.99999999998656, 0, 40.99999999998656)
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(4.999999999986844, 0, 36.99999999998685, 0)
+SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(4.999999999999999, 45.99999999998655, 37, 45.99999999998655)
+SketchLine_6 = Sketch_1.addLine(42, 40.99999999998655, 42, 4.999999999986548)
+SketchArc_1 = Sketch_1.addArc(5, 40.99999999998656, 0, 40.99999999998656, 4.999999999999999, 45.99999999998656, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_1.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.result(), SketchArc_1.endPoint())
+SketchArc_2 = Sketch_1.addArc(37, 40.99999999998655, 37, 45.99999999998655, 42, 40.99999999998655, True)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_2.results()[1])
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_2.endPoint())
+SketchArc_3 = Sketch_1.addArc(4.999999999986827, 4.999999999986823, 0, 4.99999999998656, 4.999999999986844, 0, False)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_3.startPoint())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_3.results()[1])
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_3.result(), SketchArc_3.endPoint())
+SketchArc_4 = Sketch_1.addArc(36.99999999998375, 5.000000000004257, 36.99999999998685, 0, 42, 4.999999999986548, False)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_4.startPoint())
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_4.results()[1])
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_4.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_1.result())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_4.endPoint())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_3.startPoint())
+SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_6.result())
+SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
+SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 36)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 32)
+SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
+SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchLine_8.setAuxiliary(True)
+SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
+SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
+SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
+SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_8.result())
+SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
+SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_8.result())
+SketchCircle_1 = Sketch_2.addCircle(20.99999999999342, 22.99999999999327, 19)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_1.center())
+SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 19)
+SketchCircle_2 = Sketch_2.addCircle(12.99999999999342, 22.99999999998655, 2.5)
+SketchCircle_3 = Sketch_2.addCircle(28.99999999999342, 22.99999999998655, 2.5)
+SketchCircle_4 = Sketch_2.addCircle(20.99999999999113, 14.99999999998655, 2.5)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_8.result(), SketchCircle_4.center())
+SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
+SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
+SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
+SketchLine_12 = Sketch_2.addLine(2.465190328815662e-32, 22.99999999998655, 41.99999999999999, 22.99999999998655)
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_12.setAuxiliary(True)
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_11.result())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_12.result())
+SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_2.center(), SketchCircle_3.center(), 16)
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_12.result())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_12.result())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_2.center(), SketchLine_8.result(), 8)
+SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchLine_12.endPoint(), SketchLine_11.result())
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
+SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
+SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.99999999998656)
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_13.setAuxiliary(True)
+SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
+SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_2_1/Modfied_2"))
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
+SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0)
+SketchLine_16.setName("SketchLine_17")
+SketchLine_16.result().setName("SketchLine_17")
+SketchLine_16.setAuxiliary(True)
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
+SketchLine_17.setName("SketchLine_18")
+SketchLine_17.result().setName("SketchLine_18")
+SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
+SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"))
+SketchLine_18.setName("SketchLine_19")
+SketchLine_18.result().setName("SketchLine_19")
+SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
+SketchConstraintMiddle_5 = Sketch_3.setMiddlePoint(SketchLine_16.startPoint(), SketchLine_17.result())
+SketchConstraintMiddle_6 = Sketch_3.setMiddlePoint(SketchLine_16.endPoint(), SketchLine_18.result())
+SketchConstraintMiddle_7 = Sketch_3.setMiddlePoint(SketchLine_13.endPoint(), SketchLine_15.result())
+SketchConstraintMiddle_8 = Sketch_3.setMiddlePoint(SketchLine_13.startPoint(), SketchLine_14.result())
+SketchPoint_2 = Sketch_3.addPoint(20.99999999999342, 22.99999999999327)
+SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchPoint_2.coordinates(), SketchLine_16.result())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
+SketchConstraintMiddle_9 = Sketch_3.setMiddlePoint(SketchLine_16.result(), SketchPoint_2.coordinates())
+SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchCircle_5.center(), SketchPoint_2.coordinates())
+SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_32")
+SketchCircle_6 = Sketch_3.addCircle(28.99999999999342, 22.99999999998655, 2.5)
+SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_6.center())
+SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33")
+SketchCircle_7 = Sketch_3.addCircle(12.99999999999342, 22.99999999998656, 2.5)
+SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_7.center())
+SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
+SketchConstraintEqual_6 = Sketch_3.setEqual(SketchCircle_7.results()[1], SketchCircle_6.results()[1])
+SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_7.results()[1], 2.5)
+SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), SketchCircle_7.center(), 16)
+SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8)
+model.do()
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5"))
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
+SketchLine_19 = SketchProjection_1.createdFeature()
+SketchLine_19.setName("SketchLine_20")
+SketchLine_19.result().setName("SketchLine_20")
+SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
+SketchLine_20 = SketchProjection_2.createdFeature()
+SketchLine_20.setName("SketchLine_21")
+SketchLine_20.result().setName("SketchLine_21")
+SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
+SketchLine_21.setName("SketchLine_22")
+SketchLine_21.result().setName("SketchLine_22")
+SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"))
+SketchLine_22.setName("SketchLine_23")
+SketchLine_22.result().setName("SketchLine_23")
+SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
+SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
+SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_23.setName("SketchLine_24")
+SketchLine_23.result().setName("SketchLine_24")
+SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
+SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
+SketchLine_24 = Sketch_4.addLine(4.999999999999999, -48, 37, -48)
+SketchLine_24.setName("SketchLine_25")
+SketchLine_24.result().setName("SketchLine_25")
+SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_22.result())
+SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
+SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchLine_23.result())
+SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
+SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_21.result())
+SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_24.result())
+SketchLine_25 = Sketch_4.addLine(3.593262427359596e-30, -33, 0, -43)
+SketchLine_25.setName("SketchLine_26")
+SketchLine_25.result().setName("SketchLine_26")
+SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_19.result())
+SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
+SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchLine_19.result())
+SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
+SketchLine_26 = Sketch_4.addLine(42, -33, 42, -43)
+SketchLine_26.setName("SketchLine_27")
+SketchLine_26.result().setName("SketchLine_27")
+SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchLine_20.result())
+SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
+SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_20.result())
+SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
+SketchArc_5 = Sketch_4.addArc(5, -33, 3.593262427359596e-30, -33, 4.999999999999999, -28, True)
+SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchArc_5.startPoint())
+SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
+SketchConstraintTangent_9 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_5.results()[1])
+SketchArc_6 = Sketch_4.addArc(5, -43, 0, -43, 4.999999999999999, -48, False)
+SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.startPoint())
+SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
+SketchConstraintTangent_10 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_6.results()[1])
+SketchArc_7 = Sketch_4.addArc(37, -33, 37, -28, 42, -33, True)
+SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchArc_7.startPoint())
+SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_45")
+SketchConstraintTangent_11 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_7.results()[1])
+SketchArc_8 = Sketch_4.addArc(37, -43, 37, -48, 42, -43, False)
+SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchArc_8.startPoint())
+SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_46")
+SketchConstraintTangent_12 = Sketch_4.setTangent(SketchLine_24.result(), SketchArc_8.results()[1])
+SketchConstraintDistance_6 = Sketch_4.setDistance(SketchLine_21.startPoint(), SketchLine_24.startPoint(), 20)
+SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_26.result(), SketchLine_25.result())
+SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_47")
+SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchArc_7.endPoint())
+SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchArc_8.endPoint())
+SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
+SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchArc_6.endPoint())
+SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
+SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchLine_21.result())
+SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_26.result())
+SketchConstraintTangent_15 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_26.result())
+SketchLine_27 = Sketch_4.addLine(0, -38, 42, -38)
+SketchLine_27.setName("SketchLine_28")
+SketchLine_27.result().setName("SketchLine_28")
+SketchLine_27.setAuxiliary(True)
+SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchLine_19.result())
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_20.result())
+SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
+SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), SketchLine_20.result())
+SketchConstraintMiddle_11 = Sketch_4.setMiddlePoint(SketchLine_27.startPoint(), SketchLine_19.result())
+SketchConstraintMiddle_12 = Sketch_4.setMiddlePoint(SketchLine_25.result(), SketchLine_27.startPoint())
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_22r-SketchLine_25f-SketchLine_26f-SketchLine_27r-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f")], model.selection(), 2, 17)
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1"))
+SketchLine_28 = Sketch_5.addLine(5.000000000000001, -46, 37.00000000000001, -46)
+SketchLine_28.setName("SketchLine_29")
+SketchLine_28.result().setName("SketchLine_29")
+SketchLine_29 = Sketch_5.addLine(5, -30, 37.00000000000001, -30)
+SketchLine_29.setName("SketchLine_30")
+SketchLine_29.result().setName("SketchLine_30")
+SketchLine_30 = Sketch_5.addLine(2, -43, 2, -33)
+SketchLine_30.setName("SketchLine_31")
+SketchLine_30.result().setName("SketchLine_31")
+SketchLine_31 = Sketch_5.addLine(40.00000000000001, -33, 40.00000000000001, -43)
+SketchLine_31.setName("SketchLine_32")
+SketchLine_31.result().setName("SketchLine_32")
+SketchConstraintHorizontal_5 = Sketch_5.setHorizontal(SketchLine_29.result())
+SketchConstraintHorizontal_6 = Sketch_5.setHorizontal(SketchLine_28.result())
+SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result())
+SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
+SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
+SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
+SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
+SketchLine_32.setName("SketchLine_33")
+SketchLine_32.result().setName("SketchLine_33")
+SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
+SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
+SketchLine_33.setName("SketchLine_34")
+SketchLine_33.result().setName("SketchLine_34")
+SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
+SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
+SketchLine_34.setName("SketchLine_35")
+SketchLine_34.result().setName("SketchLine_35")
+SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
+SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
+SketchLine_35.setName("SketchLine_36")
+SketchLine_35.result().setName("SketchLine_36")
+SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
+SketchArc_9 = Sketch_5.addArc(5, -33, 2, -33, 5, -30, True)
+SketchConstraintCoincidence_52 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchArc_9.startPoint())
+SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
+SketchConstraintTangent_16 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_9.results()[1])
+SketchArc_10 = Sketch_5.addArc(5, -43, 2, -43, 5.000000000000001, -46, False)
+SketchConstraintCoincidence_53 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchArc_10.startPoint())
+SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_54")
+SketchConstraintTangent_17 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_10.results()[1])
+SketchArc_11 = Sketch_5.addArc(37.00000000000001, -33, 37.00000000000001, -30, 40.00000000000001, -33, True)
+SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchLine_29.endPoint(), SketchArc_11.startPoint())
+SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55")
+SketchConstraintTangent_18 = Sketch_5.setTangent(SketchLine_29.result(), SketchArc_11.results()[1])
+SketchArc_12 = Sketch_5.addArc(37.00000000000001, -43, 37.00000000000001, -46, 40.00000000000001, -43, False)
+SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_28.endPoint(), SketchArc_12.startPoint())
+SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
+SketchConstraintTangent_19 = Sketch_5.setTangent(SketchLine_28.result(), SketchArc_12.results()[1])
+SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchArc_9.endPoint(), SketchLine_29.startPoint())
+SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_57")
+SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchArc_11.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_58")
+SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_31.endPoint(), SketchArc_12.endPoint())
+SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_59")
+SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_10.endPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_60")
+SketchConstraintEqual_10 = Sketch_5.setEqual(SketchArc_11.results()[1], SketchArc_9.results()[1])
+SketchConstraintEqual_11 = Sketch_5.setEqual(SketchArc_10.results()[1], SketchArc_12.results()[1])
+SketchConstraintEqual_12 = Sketch_5.setEqual(SketchArc_12.results()[1], SketchArc_11.results()[1])
+SketchConstraintTangent_20 = Sketch_5.setTangent(SketchArc_9.results()[1], SketchLine_29.result())
+SketchConstraintTangent_21 = Sketch_5.setTangent(SketchArc_12.results()[1], SketchLine_31.result())
+SketchConstraintRadius_6 = Sketch_5.setRadius(SketchArc_9.results()[1], 3)
+SketchLine_36 = Sketch_5.addLine(2, -38, 39.99999999999998, -38)
+SketchLine_36.setName("SketchLine_37")
+SketchLine_36.result().setName("SketchLine_37")
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_36.startPoint(), SketchLine_30.result())
+SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_61")
+SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_36.endPoint(), SketchLine_31.result())
+SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_62")
+SketchConstraintMiddle_13 = Sketch_5.setMiddlePoint(SketchLine_31.result(), SketchLine_36.endPoint())
+SketchConstraintMiddle_14 = Sketch_5.setMiddlePoint(SketchLine_36.startPoint(), SketchLine_30.result())
+SketchCircle_8 = Sketch_5.addCircle(13.00000000000001, -38, 2.5)
+SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_8.center())
+SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_63")
+SketchCircle_9 = Sketch_5.addCircle(29, -38, 2.5)
+SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_9.center())
+SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_64")
+SketchConstraintEqual_13 = Sketch_5.setEqual(SketchCircle_9.results()[1], SketchCircle_8.results()[1])
+SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_9.results()[1], 2.5)
+SketchConstraintDistance_11 = Sketch_5.setDistance(SketchCircle_8.center(), SketchCircle_9.center(), 16)
+SketchLine_37 = Sketch_5.addLine(21, -28, 21, -48)
+SketchLine_37.setName("SketchLine_38")
+SketchLine_37.result().setName("SketchLine_38")
+SketchLine_37.setAuxiliary(True)
+SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_37.startPoint(), SketchLine_34.result())
+SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_65")
+SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_37.endPoint(), SketchLine_35.result())
+SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_66")
+SketchConstraintMiddle_15 = Sketch_5.setMiddlePoint(SketchLine_37.startPoint(), SketchLine_34.result())
+SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), SketchLine_35.result())
+SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
+model.do()
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
+SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
+SketchLine_38.setName("SketchLine_39")
+SketchLine_38.result().setName("SketchLine_39")
+SketchLine_39 = Sketch_6.addLine(-59, 2, -17, 2)
+SketchLine_39.setName("SketchLine_40")
+SketchLine_39.result().setName("SketchLine_40")
+SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_38.endPoint(), SketchLine_39.startPoint())
+SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_67")
+SketchLine_40 = Sketch_6.addLine(-17, 2, -16.99997429885428, 44)
+SketchLine_40.setName("SketchLine_41")
+SketchLine_40.result().setName("SketchLine_41")
+SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchLine_39.endPoint(), SketchLine_40.startPoint())
+SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_68")
+SketchLine_41 = Sketch_6.addLine(-16.99997429885428, 44, -27.99998714942714, 44)
+SketchLine_41.setName("SketchLine_42")
+SketchLine_41.result().setName("SketchLine_42")
+SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
+SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_69")
+SketchLine_42 = Sketch_6.addLine(-27.99998714942714, 44, -27.99998714942714, 29)
+SketchLine_42.setName("SketchLine_43")
+SketchLine_42.result().setName("SketchLine_43")
+SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
+SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_70")
+SketchLine_43 = Sketch_6.addLine(-27.99998714942714, 29, -47.99998714942714, 29)
+SketchLine_43.setName("SketchLine_44")
+SketchLine_43.result().setName("SketchLine_44")
+SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
+SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_71")
+SketchLine_44 = Sketch_6.addLine(-47.99998714942714, 29, -47.99998714942714, 44)
+SketchLine_44.setName("SketchLine_45")
+SketchLine_44.result().setName("SketchLine_45")
+SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_72")
+SketchLine_45 = Sketch_6.addLine(-47.99998714942714, 44, -59, 44)
+SketchLine_45.setName("SketchLine_46")
+SketchLine_45.result().setName("SketchLine_46")
+SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
+SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_73")
+SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_45.endPoint())
+SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_74")
+SketchConstraintEqual_14 = Sketch_6.setEqual(SketchLine_38.result(), SketchLine_40.result())
+SketchConstraintEqual_15 = Sketch_6.setEqual(SketchLine_41.result(), SketchLine_45.result())
+SketchConstraintEqual_16 = Sketch_6.setEqual(SketchLine_42.result(), SketchLine_44.result())
+SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_45.result())
+SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_43.result())
+SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_39.result())
+SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_41.result())
+SketchConstraintVertical_4 = Sketch_6.setVertical(SketchLine_38.result())
+SketchConstraintVertical_5 = Sketch_6.setVertical(SketchLine_44.result())
+SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_42.result())
+SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42)
+SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
+SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
+SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
+SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchLine_46 = SketchProjection_3.createdFeature()
+SketchLine_46.setName("SketchLine_47")
+SketchLine_46.result().setName("SketchLine_47")
+SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_3"))
+SketchLine_47 = SketchProjection_4.createdFeature()
+SketchLine_47.setName("SketchLine_48")
+SketchLine_47.result().setName("SketchLine_48")
+SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchLine_48 = SketchProjection_5.createdFeature()
+SketchLine_48.setName("SketchLine_49")
+SketchLine_48.result().setName("SketchLine_49")
+SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
+SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
+model.do()
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
+SketchLine_49.setName("SketchLine_50")
+SketchLine_49.result().setName("SketchLine_50")
+SketchLine_49.setAuxiliary(True)
+SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchLine_50.setName("SketchLine_51")
+SketchLine_50.result().setName("SketchLine_51")
+SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
+SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_75")
+SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_13s"))
+SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_49.endPoint(), SketchPoint_3.result())
+SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_76")
+SketchConstraintMiddle_17 = Sketch_7.setMiddlePoint(SketchLine_49.startPoint(), SketchLine_50.result())
+SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656)
+SketchLine_51.setName("SketchLine_52")
+SketchLine_51.result().setName("SketchLine_52")
+SketchLine_51.setAuxiliary(True)
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchLine_52.setName("SketchLine_53")
+SketchLine_52.result().setName("SketchLine_53")
+SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
+SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
+SketchLine_53.setName("SketchLine_54")
+SketchLine_53.result().setName("SketchLine_54")
+SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
+SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_78")
+SketchConstraintMiddle_18 = Sketch_7.setMiddlePoint(SketchLine_51.startPoint(), SketchLine_52.result())
+SketchConstraintMiddle_19 = Sketch_7.setMiddlePoint(SketchLine_51.endPoint(), SketchLine_53.result())
+SketchPoint_4 = Sketch_7.addPoint(-37.99999999999999, -22.99999999998656)
+SketchConstraintCoincidence_78 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchLine_51.result())
+SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_79")
+SketchConstraintMiddle_20 = Sketch_7.setMiddlePoint(SketchPoint_4.coordinates(), SketchLine_51.result())
+SketchCircle_10 = Sketch_7.addCircle(-37.99999999999999, -22.99999999998656, 17)
+SketchConstraintCoincidence_79 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchCircle_10.center())
+SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_80")
+SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_10.results()[1], 17)
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 16, 0)
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face_1"))
+SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"))
+SketchLine_54 = SketchProjection_6.createdFeature()
+SketchLine_54.setName("SketchLine_55")
+SketchLine_54.result().setName("SketchLine_55")
+SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchLine_55 = SketchProjection_7.createdFeature()
+SketchLine_55.setName("SketchLine_56")
+SketchLine_55.result().setName("SketchLine_56")
+SketchLine_56 = Sketch_8.addLine(0, -22.99999999998656, -76, -22.99999999999327)
+SketchLine_56.setName("SketchLine_57")
+SketchLine_56.result().setName("SketchLine_57")
+SketchLine_56.setAuxiliary(True)
+SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_56.startPoint(), SketchLine_55.result())
+SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_81")
+SketchConstraintCoincidence_81 = Sketch_8.setCoincident(SketchLine_56.endPoint(), SketchLine_54.result())
+SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_82")
+SketchConstraintMiddle_21 = Sketch_8.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_54.result())
+SketchConstraintMiddle_22 = Sketch_8.setMiddlePoint(SketchLine_55.result(), SketchLine_56.startPoint())
+SketchLine_57 = Sketch_8.addLine(-37.99999999999842, -40.99999999998655, -38.000000000002, 0)
+SketchLine_57.setName("SketchLine_58")
+SketchLine_57.result().setName("SketchLine_58")
+SketchLine_57.setAuxiliary(True)
+SketchPoint_5 = Sketch_8.addPoint(-38, -22.99999999998992)
+SketchConstraintCoincidence_82 = Sketch_8.setCoincident(SketchPoint_5.coordinates(), SketchLine_56.result())
+SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_83")
+SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
+SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
+SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchLine_58 = SketchProjection_8.createdFeature()
+SketchLine_58.setName("SketchLine_59")
+SketchLine_58.result().setName("SketchLine_59")
+SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
+SketchLine_59 = SketchProjection_9.createdFeature()
+SketchLine_59.setName("SketchLine_60")
+SketchLine_59.result().setName("SketchLine_60")
+SketchConstraintCoincidence_84 = Sketch_8.setCoincident(SketchLine_57.startPoint(), SketchLine_58.result())
+SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_85")
+SketchConstraintCoincidence_85 = Sketch_8.setCoincident(SketchLine_57.endPoint(), SketchLine_59.result())
+SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_86")
+SketchCircle_11 = Sketch_8.addCircle(-30, -22.99999999998921, 2.5)
+SketchConstraintCoincidence_86 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_11.center())
+SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_87")
+SketchCircle_12 = Sketch_8.addCircle(-46.00000000004985, -22.99999999999062, 2.5)
+SketchConstraintCoincidence_87 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_12.center())
+SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_88")
+SketchConstraintEqual_17 = Sketch_8.setEqual(SketchCircle_12.results()[1], SketchCircle_11.results()[1])
+SketchConstraintRadius_9 = Sketch_8.setRadius(SketchCircle_11.results()[1], 2.5)
+SketchConstraintDistance_15 = Sketch_8.setDistance(SketchCircle_11.center(), SketchLine_57.result(), 8)
+SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16)
+model.do()
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_4"), 38, True)
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992)
+SketchLine_60.setName("SketchLine_61")
+SketchLine_60.result().setName("SketchLine_61")
+SketchLine_61 = Sketch_9.addLine(0, -36.99999999998992, 0, -22.99999999998992)
+SketchLine_61.setName("SketchLine_62")
+SketchLine_61.result().setName("SketchLine_62")
+SketchLine_62 = Sketch_9.addLine(0, -22.99999999998992, -14, -22.99999999998992)
+SketchLine_62.setName("SketchLine_63")
+SketchLine_62.result().setName("SketchLine_63")
+SketchLine_63 = Sketch_9.addLine(-14, -22.99999999998992, -14, -36.99999999998992)
+SketchLine_63.setName("SketchLine_64")
+SketchLine_63.result().setName("SketchLine_64")
+SketchConstraintCoincidence_88 = Sketch_9.setCoincident(SketchLine_63.endPoint(), SketchLine_60.startPoint())
+SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_89")
+SketchConstraintCoincidence_89 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
+SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_90")
+SketchConstraintCoincidence_90 = Sketch_9.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
+SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_91")
+SketchConstraintCoincidence_91 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
+SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_92")
+SketchConstraintHorizontal_11 = Sketch_9.setHorizontal(SketchLine_60.result())
+SketchConstraintVertical_7 = Sketch_9.setVertical(SketchLine_61.result())
+SketchConstraintHorizontal_12 = Sketch_9.setHorizontal(SketchLine_62.result())
+SketchConstraintVertical_8 = Sketch_9.setVertical(SketchLine_63.result())
+SketchConstraintLength_7 = Sketch_9.setLength(SketchLine_61.result(), 14)
+SketchConstraintEqual_18 = Sketch_9.setEqual(SketchLine_61.result(), SketchLine_60.result())
+SketchLine_64 = Sketch_9.addLine(-5.662490896925754, -22.99999999998992, -60.5217691188193, -22.99999999998992)
+SketchLine_64.setName("SketchLine_65")
+SketchLine_64.result().setName("SketchLine_65")
+SketchLine_64.setAuxiliary(True)
+SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/Vertex-SketchPoint_5"))
+SketchConstraintCoincidence_92 = Sketch_9.setCoincident(SketchLine_64.result(), SketchPoint_6.coordinates())
+SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_93")
+SketchConstraintHorizontal_13 = Sketch_9.setHorizontal(SketchLine_64.result())
+SketchConstraintCoincidence_93 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_64.result())
+SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_94")
+SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_52"))
+SketchLine_65.setName("SketchLine_66")
+SketchLine_65.result().setName("SketchLine_66")
+SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_65.result())
+SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
+model.do()
+RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
+model.do()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Part_1, 1)
+model.testNbSubResults(Part_1, [0])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [5])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [78])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [340])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [680])
+model.testResultsVolumes(Part_1, [61675.12443110236])
+model.end()
+
+assert(model.checkPythonDump())

diff --git a/test.models/piece_12.py b/test.models/piece_12.py
new file mode 100644 (file)
index 0000000..f3e4655
--- /dev/null
+++ b/test.models/piece_12.py
@@ -0,0 +1,765 @@
+# -*- coding: utf-8 -*-
+from GeomAPI import *
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "r1", "26.5")
+model.addParameter(Part_1_doc, "r2", "22")
+model.addParameter(Part_1_doc, "entraxe", "80")
+Parameter_Epaisseur = model.addParameter(Part_1_doc, "epaisseur", "34")
+model.addParameter(Part_1_doc, "ep", "4")
+model.addParameter(Part_1_doc, "d1", "112")
+model.addParameter(Part_1_doc, "d2", "24")
+model.addParameter(Part_1_doc, "d3", "5")
+model.addParameter(Part_1_doc, "r3", "2.5")
+model.addParameter(Part_1_doc, "dtrou", "9")
+model.addParameter(Part_1_doc, "ep_o", "24")
+model.addParameter(Part_1_doc, "d_per", "2.5")
+model.addParameter(Part_1_doc, "r4", "15")
+model.addParameter(Part_1_doc, "h", "45")
+model.addParameter(Part_1_doc, "ep_o2", "5")
+model.addParameter(Part_1_doc, "d_o", "10")
+model.addParameter(Part_1_doc, "h_o", "57")
+model.addParameter(Part_1_doc, "p_trou1", "29.2")
+model.addParameter(Part_1_doc, "p2_trou1", "19.2")
+model.addParameter(Part_1_doc, "p_trou2", "46")
+model.addParameter(Part_1_doc, "p2_trou", "36.5")
+model.addParameter(Part_1_doc, "h_p", "40")
+model.addParameter(Part_1_doc, "M8", "4")
+model.addParameter(Part_1_doc, "r_trou2", "10")
+model.addParameter(Part_1_doc, "r_al1", "12.5")
+model.addParameter(Part_1_doc, "r_al2", "14")
+model.addParameter(Part_1_doc, "coeff", "1")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 15)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchCircle_2 = Sketch_1.addCircle(80, 0, 15)
+SketchCircle_3 = Sketch_1.addCircle(0, 0, 12.5)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchCircle_3.center())
+SketchCircle_4 = Sketch_1.addCircle(80, 0, 14)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchCircle_4.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_3.results()[1], "r_al1*coeff")
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchCircle_4.results()[1], "r_al2*coeff")
+SketchConstraintRadius_3 = Sketch_1.setRadius(SketchCircle_1.results()[1], "r4*coeff")
+SketchConstraintRadius_4 = Sketch_1.setRadius(SketchCircle_2.results()[1], "r4*coeff")
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_3.center(), SketchCircle_4.center(), "entraxe*coeff")
+SketchArc_1 = Sketch_1.addArc(0, 0, 13.96424004376894, -17, 13.96424004376894, 17, True)
+SketchArc_1.setName("SketchArc_4")
+SketchArc_1.result().setName("SketchArc_4")
+SketchArc_1.results()[1].setName("SketchArc_4_2")
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchCircle_3.center(), SketchArc_1.center())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_7")
+SketchLine_1 = Sketch_1.addLine(13.96424004376894, 17, 66.03575995620928, 17)
+SketchLine_1.setName("SketchLine_6")
+SketchLine_1.result().setName("SketchLine_6")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_18")
+SketchLine_2 = Sketch_1.addLine(13.96424004376894, -17, 66.03575995623092, -17)
+SketchLine_2.setName("SketchLine_10")
+SketchLine_2.result().setName("SketchLine_10")
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
+SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_5")
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_6")
+SketchLine_3 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_3.setName("SketchLine_11")
+SketchLine_3.result().setName("SketchLine_11")
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_15")
+SketchConstraintRadius_5 = Sketch_1.setRadius(SketchArc_1.results()[1], "r2*coeff")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchLine_3.result(), "epaisseur/2*coeff")
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchLine_2.result(), "epaisseur*coeff")
+SketchArc_2 = Sketch_1.addArc(80, 0, 66.03575995623092, -17, 66.03575995620928, 17, False)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchArc_2.center())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_3.result())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchArc_3 = Sketch_1.addArc(9.077705920073647e-31, -3.860574861749558e-31, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False)
+SketchArc_3.setName("SketchArc_7")
+SketchArc_3.result().setName("SketchArc_7")
+SketchArc_3.results()[1].setName("SketchArc_7_2")
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.center())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_54")
+SketchArc_4 = Sketch_1.addArc(3.497294868556922e-32, 3.186289860391258e-33, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False)
+SketchArc_4.setName("SketchArc_8")
+SketchArc_4.result().setName("SketchArc_8")
+SketchArc_4.results()[1].setName("SketchArc_8_2")
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_4.center())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_55")
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchArc_4.results()[1], SketchArc_3.results()[1])
+SketchConstraintEqual_2.setName("SketchConstraintEqual_8")
+SketchArc_5 = Sketch_1.addArc(17.5, 12.49632352941176, 15.46247221747308, 11.04137459394768, 17.5, 15, True)
+SketchArc_5.setName("SketchArc_9")
+SketchArc_5.result().setName("SketchArc_9")
+SketchArc_5.results()[1].setName("SketchArc_9_2")
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_5.startPoint())
+SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_56")
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_5.results()[1])
+SketchArc_6 = Sketch_1.addArc(17.5, -12.49632352941177, 15.46247221747307, -11.0413745939477, 17.5, -15, False)
+SketchArc_6.setName("SketchArc_10")
+SketchArc_6.result().setName("SketchArc_10")
+SketchArc_6.results()[1].setName("SketchArc_10_2")
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchArc_6.startPoint())
+SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_57")
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_6.results()[1])
+SketchLine_4 = Sketch_1.addLine(17.5, 15, 37.99999999999999, 15)
+SketchLine_4.setName("SketchLine_42")
+SketchLine_4.result().setName("SketchLine_42")
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_58")
+SketchLine_5 = Sketch_1.addLine(18.89444362769119, -2, 34.49444362769118, -2)
+SketchLine_5.setName("SketchLine_44")
+SketchLine_5.result().setName("SketchLine_44")
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_60")
+SketchLine_6 = Sketch_1.addLine(18.89444362769119, 2, 34.49444362769118, 2)
+SketchLine_6.setName("SketchLine_45")
+SketchLine_6.result().setName("SketchLine_45")
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_61")
+SketchLine_7 = Sketch_1.addLine(37.99999999999999, 15, 38.00000000000001, 5.505556372308819)
+SketchLine_7.setName("SketchLine_46")
+SketchLine_7.result().setName("SketchLine_46")
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_62")
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_5.results()[1], SketchArc_6.results()[1])
+SketchConstraintEqual_3.setName("SketchConstraintEqual_9")
+SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_6.result())
+SketchConstraintEqual_4.setName("SketchConstraintEqual_11")
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_12")
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_13")
+SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintHorizontal_5.setName("SketchConstraintHorizontal_14")
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintVertical_1.setName("SketchConstraintVertical_7")
+SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17.00000000000001)
+SketchLine_8.setName("SketchLine_47")
+SketchLine_8.result().setName("SketchLine_47")
+SketchLine_8.setAuxiliary(True)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_63")
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_2.result())
+SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_64")
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_1.result())
+SketchConstraintMiddle_1.setName("SketchConstraintMiddle_4")
+SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_2.result())
+SketchConstraintMiddle_2.setName("SketchConstraintMiddle_5")
+SketchPoint_2 = Sketch_1.addPoint(40, 2.220450266386716e-15)
+SketchPoint_2.setName("SketchPoint_7")
+SketchPoint_2.result().setName("SketchPoint_7")
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_8.result())
+SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_65")
+SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchLine_8.result(), SketchPoint_2.coordinates())
+SketchConstraintMiddle_3.setName("SketchConstraintMiddle_6")
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), "2*coeff")
+SketchConstraintDistance_4.setName("SketchConstraintDistance_17")
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_3.endPoint(), SketchLine_3.result(), "2*coeff")
+SketchConstraintDistance_5.setName("SketchConstraintDistance_18")
+SketchConstraintRadius_6 = Sketch_1.setRadius(SketchArc_4.results()[1], "(r4+4)*coeff")
+SketchConstraintRadius_6.setName("SketchConstraintRadius_13")
+SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_8.result(), "2*coeff")
+SketchConstraintDistance_6.setName("SketchConstraintDistance_19")
+SketchArc_7 = Sketch_1.addArc(40, 2.220450266386716e-15, 34.49444362769118, 2, 38.00000000000001, 5.505556372308819, True)
+SketchArc_7.setName("SketchArc_11")
+SketchArc_7.result().setName("SketchArc_11")
+SketchArc_7.results()[1].setName("SketchArc_11_2")
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_7.center())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_66")
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_7.startPoint())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_67")
+SketchArc_8 = Sketch_1.addArc(40.00000000000001, -2.652239435709897e-15, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False)
+SketchArc_8.setName("SketchArc_12")
+SketchArc_8.result().setName("SketchArc_12")
+SketchArc_8.results()[1].setName("SketchArc_12_2")
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_8.center())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_68")
+SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_8.startPoint())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_69")
+SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchLine_7.endPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_72")
+SketchConstraintDistance_7 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_1.result(), "2*coeff")
+SketchConstraintDistance_7.setName("SketchConstraintDistance_21")
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_4.result())
+SketchCircle_5 = Sketch_1.addCircle(40, -13, 2.5)
+SketchCircle_5.setName("SketchCircle_11")
+SketchCircle_5.result().setName("SketchCircle_11")
+SketchCircle_5.results()[1].setName("SketchCircle_11_2")
+SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_8.result(), SketchCircle_5.center())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_70")
+SketchConstraintRadius_7 = Sketch_1.setRadius(SketchCircle_5.results()[1], "2.5*coeff")
+SketchConstraintRadius_7.setName("SketchConstraintRadius_14")
+SketchArc_9 = Sketch_1.addArc(40, -13, 35.51437699680511, -13.35942492012782, 37.95784774655168, -8.990060577298436, True)
+SketchArc_9.setName("SketchArc_13")
+SketchArc_9.result().setName("SketchArc_13")
+SketchArc_9.results()[1].setName("SketchArc_13_2")
+SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchCircle_5.center(), SketchArc_9.center())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_71")
+SketchLine_9 = Sketch_1.addLine(37.95784774655168, -5.490060577298436, 37.95784774655168, -8.990060577298436)
+SketchLine_9.setName("SketchLine_48")
+SketchLine_9.result().setName("SketchLine_48")
+SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_74")
+SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_9.endPoint())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_75")
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_2.setName("SketchConstraintVertical_8")
+SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_9.results()[1], "(2.5+2)*coeff")
+SketchConstraintRadius_8.setName("SketchConstraintRadius_15")
+SketchConstraintDistance_8 = Sketch_1.setDistance(SketchCircle_5.center(), SketchLine_2.result(), "4*coeff")
+SketchConstraintDistance_8.setName("SketchConstraintDistance_22")
+SketchLine_10 = Sketch_1.addLine(17.5, -15, 34.00000000000001, -15)
+SketchLine_10.setName("SketchLine_43")
+SketchLine_10.result().setName("SketchLine_43")
+SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_73")
+SketchArc_10 = Sketch_1.addArc(34.00000000000001, -13.48076923076937, 34.00000000000001, -15, 35.51437699680511, -13.35942492012782, False)
+SketchArc_10.setName("SketchArc_14")
+SketchArc_10.result().setName("SketchArc_14")
+SketchArc_10.results()[1].setName("SketchArc_14_2")
+SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_10.startPoint())
+SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_76")
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_10.result(), SketchArc_10.results()[1])
+SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_9.results()[1], SketchArc_10.endPoint())
+SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_77")
+SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_9.results()[1], SketchArc_10.results()[1])
+SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_9.startPoint(), SketchArc_10.endPoint())
+SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_78")
+SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_10.endPoint(), SketchLine_2.result(), "2*coeff")
+SketchConstraintDistance_9.setName("SketchConstraintDistance_20")
+SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_10.result())
+SketchConstraintHorizontal_6.setName("SketchConstraintHorizontal_15")
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_10.result(), "16.5*coeff")
+SketchConstraintLength_1.setName("SketchConstraintLength_8")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_4.result(), "20.5*coeff")
+SketchConstraintLength_2.setName("SketchConstraintLength_9")
+SketchLine_11 = Sketch_1.addLine(17.5, 15, 17.5, -15)
+SketchLine_11.setName("SketchLine_49")
+SketchLine_11.result().setName("SketchLine_49")
+SketchLine_11.setAuxiliary(True)
+SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_79")
+SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_11.endPoint())
+SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_80")
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_11.result())
+SketchConstraintVertical_3.setName("SketchConstraintVertical_9")
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), "15.6*coeff")
+SketchConstraintLength_3.setName("SketchConstraintLength_10")
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_9.result(), "3.5*coeff")
+SketchConstraintLength_4.setName("SketchConstraintLength_11")
+SketchConstraintMirror_1_objects = [SketchLine_4.result(), SketchArc_5.results()[1], SketchArc_4.results()[1], SketchLine_6.result(), SketchArc_7.results()[1], SketchLine_7.result(), SketchLine_5.result(), SketchArc_8.results()[1], SketchLine_9.result(), SketchArc_9.results()[1], SketchArc_10.results()[1], SketchLine_10.result(), SketchArc_6.results()[1], SketchArc_3.results()[1]]
+SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_8.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchArc_11, SketchArc_12, SketchLine_13, SketchArc_13, SketchLine_14, SketchLine_15, SketchArc_14, SketchLine_16, SketchArc_15, SketchArc_16, SketchLine_17, SketchArc_17, SketchArc_18] = SketchConstraintMirror_1.mirrored()
+SketchArc_18.setName("SketchArc_22")
+SketchArc_18.result().setName("SketchArc_22")
+SketchArc_18.results()[1].setName("SketchArc_22_2")
+SketchArc_17.setName("SketchArc_21")
+SketchArc_17.result().setName("SketchArc_21")
+SketchArc_17.results()[1].setName("SketchArc_21_2")
+SketchLine_17.setName("SketchLine_55")
+SketchLine_17.result().setName("SketchLine_55")
+SketchArc_16.setName("SketchArc_20")
+SketchArc_16.result().setName("SketchArc_20")
+SketchArc_16.results()[1].setName("SketchArc_20_2")
+SketchArc_15.setName("SketchArc_19")
+SketchArc_15.result().setName("SketchArc_19")
+SketchArc_15.results()[1].setName("SketchArc_19_2")
+SketchLine_16.setName("SketchLine_54")
+SketchLine_16.result().setName("SketchLine_54")
+SketchArc_14.setName("SketchArc_18")
+SketchArc_14.result().setName("SketchArc_18")
+SketchArc_14.results()[1].setName("SketchArc_18_2")
+SketchLine_15.setName("SketchLine_53")
+SketchLine_15.result().setName("SketchLine_53")
+SketchLine_14.setName("SketchLine_52")
+SketchLine_14.result().setName("SketchLine_52")
+SketchArc_13.setName("SketchArc_17")
+SketchArc_13.result().setName("SketchArc_17")
+SketchArc_13.results()[1].setName("SketchArc_17_2")
+SketchLine_13.setName("SketchLine_51")
+SketchLine_13.result().setName("SketchLine_51")
+SketchArc_12.setName("SketchArc_16")
+SketchArc_12.result().setName("SketchArc_16")
+SketchArc_12.results()[1].setName("SketchArc_16_2")
+SketchArc_11.setName("SketchArc_15")
+SketchArc_11.result().setName("SketchArc_15")
+SketchArc_11.results()[1].setName("SketchArc_15_2")
+SketchLine_12.setName("SketchLine_50")
+SketchLine_12.result().setName("SketchLine_50")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_4_2f-SketchLine_6r-SketchLine_10f-SketchArc_2_2f")], model.selection(), "h_p*coeff", 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2"))
+SketchCircle_6 = SketchProjection_1.createdFeature()
+SketchCircle_6.setName("SketchCircle_5")
+SketchCircle_6.result().setName("SketchCircle_5")
+SketchCircle_6.results()[1].setName("SketchCircle_5_2")
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_4_2"))
+SketchCircle_7 = SketchProjection_2.createdFeature()
+SketchCircle_7.setName("SketchCircle_6")
+SketchCircle_7.result().setName("SketchCircle_6")
+SketchCircle_7.results()[1].setName("SketchCircle_6_2")
+SketchCircle_8 = Sketch_2.addCircle(80, 0, 22)
+SketchCircle_8.setName("SketchCircle_7")
+SketchCircle_8.result().setName("SketchCircle_7")
+SketchCircle_8.results()[1].setName("SketchCircle_7_2")
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_6.result(), SketchCircle_8.center())
+SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_12")
+SketchConstraintRadius_9 = Sketch_2.setRadius(SketchCircle_8.results()[1], "r2*coeff")
+SketchConstraintRadius_9.setName("SketchConstraintRadius_6")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0)
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"))
+SketchLine_18 = SketchProjection_3.createdFeature()
+SketchLine_18.setName("SketchLine_4")
+SketchLine_18.result().setName("SketchLine_4")
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"))
+SketchLine_19 = SketchProjection_4.createdFeature()
+SketchLine_19.setName("SketchLine_5")
+SketchLine_19.result().setName("SketchLine_5")
+SketchProjection_5 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OY"))
+SketchLine_20 = SketchProjection_5.createdFeature()
+SketchLine_20.setName("SketchLine_7")
+SketchLine_20.result().setName("SketchLine_7")
+SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"))
+SketchLine_21 = SketchProjection_6.createdFeature()
+SketchLine_21.setName("SketchLine_8")
+SketchLine_21.result().setName("SketchLine_8")
+SketchLine_22 = Sketch_3.addLine(72.5, 0, 87.5, 0)
+SketchLine_22.setName("SketchLine_9")
+SketchLine_22.result().setName("SketchLine_9")
+SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_21.result())
+SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_13")
+SketchLine_23 = Sketch_3.addLine(87.5, 0, 87.5, -12)
+SketchLine_23.setName("SketchLine_12")
+SketchLine_23.result().setName("SketchLine_12")
+SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_14")
+SketchLine_24 = Sketch_3.addLine(72.5, -12, 72.5, 0)
+SketchLine_24.setName("SketchLine_14")
+SketchLine_24.result().setName("SketchLine_14")
+SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_24.endPoint())
+SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_19")
+SketchConstraintHorizontal_7 = Sketch_3.setHorizontal(SketchLine_22.result())
+SketchConstraintHorizontal_7.setName("SketchConstraintHorizontal_4")
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_24.result())
+SketchConstraintVertical_4.setName("SketchConstraintVertical_1")
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_23.result())
+SketchConstraintVertical_5.setName("SketchConstraintVertical_2")
+SketchConstraintEqual_5 = Sketch_3.setEqual(SketchLine_24.result(), SketchLine_23.result())
+SketchConstraintEqual_5.setName("SketchConstraintEqual_3")
+SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_22.result(), "15*coeff")
+SketchConstraintLength_5.setName("SketchConstraintLength_1")
+SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_24.result(), "12*coeff")
+SketchConstraintLength_6.setName("SketchConstraintLength_2")
+SketchCircle_9 = Sketch_3.addCircle(80, -9, 4)
+SketchCircle_9.setName("SketchCircle_8")
+SketchCircle_9.result().setName("SketchCircle_8")
+SketchCircle_9.results()[1].setName("SketchCircle_8_2")
+SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_9.center(), SketchLine_22.result(), "dtrou*coeff")
+SketchConstraintDistance_10.setName("SketchConstraintDistance_5")
+SketchConstraintRadius_10 = Sketch_3.setRadius(SketchCircle_9.results()[1], "M8*coeff")
+SketchConstraintRadius_10.setName("SketchConstraintRadius_7")
+SketchConstraintDistance_11 = Sketch_3.setDistance(SketchLine_20.result(), SketchLine_24.endPoint(), "(entraxe-15/2)*coeff")
+SketchConstraintDistance_11.setName("SketchConstraintDistance_7")
+SketchConstraintDistance_12 = Sketch_3.setDistance(SketchCircle_9.center(), SketchLine_24.result(), "15/2*coeff")
+SketchConstraintDistance_12.setName("SketchConstraintDistance_8")
+SketchLine_25 = Sketch_3.addLine(85, -17, 75, -17)
+SketchLine_25.setName("SketchLine_26")
+SketchLine_25.result().setName("SketchLine_26")
+SketchLine_26 = Sketch_3.addLine(75, -17, 72.5, -12)
+SketchLine_26.setName("SketchLine_27")
+SketchLine_26.result().setName("SketchLine_27")
+SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
+SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_31")
+SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_26.endPoint())
+SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_32")
+SketchLine_27 = Sketch_3.addLine(87.5, -12, 85, -17)
+SketchLine_27.setName("SketchLine_28")
+SketchLine_27.result().setName("SketchLine_28")
+SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_27.startPoint())
+SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_33")
+SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_27.endPoint())
+SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_34")
+SketchConstraintHorizontal_8 = Sketch_3.setHorizontal(SketchLine_25.result())
+SketchConstraintHorizontal_8.setName("SketchConstraintHorizontal_7")
+SketchConstraintEqual_6 = Sketch_3.setEqual(SketchLine_27.result(), SketchLine_26.result())
+SketchConstraintEqual_6.setName("SketchConstraintEqual_7")
+SketchConstraintDistance_13 = Sketch_3.setDistance(SketchLine_22.endPoint(), SketchLine_25.result(), "17*coeff")
+SketchConstraintDistance_13.setName("SketchConstraintDistance_11")
+SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff")
+SketchConstraintDistance_14.setName("SketchConstraintDistance_12")
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
+Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")])
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")])
+Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_1"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"))
+SketchLine_28 = SketchProjection_7.createdFeature()
+SketchLine_28.setName("SketchLine_17")
+SketchLine_28.result().setName("SketchLine_17")
+SketchProjection_8 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"))
+SketchLine_29 = SketchProjection_8.createdFeature()
+SketchLine_29.setName("SketchLine_18")
+SketchLine_29.result().setName("SketchLine_18")
+SketchLine_30 = Sketch_4.addLine(7.5, 0, -7.5, 0)
+SketchLine_30.setName("SketchLine_19")
+SketchLine_30.result().setName("SketchLine_19")
+SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_29.result())
+SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_22")
+SketchLine_31 = Sketch_4.addLine(-7.5, 0, -7.5, -12)
+SketchLine_31.setName("SketchLine_20")
+SketchLine_31.result().setName("SketchLine_20")
+SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_23")
+SketchLine_32 = Sketch_4.addLine(7.5, -12, 7.5, 0)
+SketchLine_32.setName("SketchLine_24")
+SketchLine_32.result().setName("SketchLine_24")
+SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_32.endPoint())
+SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_28")
+SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_31.result())
+SketchConstraintVertical_6.setName("SketchConstraintVertical_3")
+SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_32.result())
+SketchConstraintVertical_7.setName("SketchConstraintVertical_4")
+SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_30.result())
+SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_31.result(), SketchLine_32.result())
+SketchConstraintEqual_7.setName("SketchConstraintEqual_5")
+SketchConstraintMiddle_4 = Sketch_4.setMiddlePoint(SketchLine_30.result(), SketchAPI_Line(SketchLine_29).startPoint())
+SketchConstraintMiddle_4.setName("SketchConstraintMiddle_1")
+SketchLine_33 = Sketch_4.addLine(-7.5, -12, -5, -17)
+SketchLine_33.setName("SketchLine_21")
+SketchLine_33.result().setName("SketchLine_21")
+SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_24")
+SketchLine_34 = Sketch_4.addLine(-5, -17, 5, -17)
+SketchLine_34.setName("SketchLine_22")
+SketchLine_34.result().setName("SketchLine_22")
+SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_25")
+SketchLine_35 = Sketch_4.addLine(5, -17, 7.5, -12)
+SketchLine_35.setName("SketchLine_23")
+SketchLine_35.result().setName("SketchLine_23")
+SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_26")
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.endPoint())
+SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_27")
+SketchConstraintEqual_8 = Sketch_4.setEqual(SketchLine_35.result(), SketchLine_33.result())
+SketchConstraintEqual_8.setName("SketchConstraintEqual_6")
+SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_34.result())
+SketchConstraintHorizontal_10.setName("SketchConstraintHorizontal_8")
+SketchConstraintLength_7 = Sketch_4.setLength(SketchLine_30.result(), "15*coeff")
+SketchConstraintLength_7.setName("SketchConstraintLength_4")
+SketchConstraintLength_8 = Sketch_4.setLength(SketchLine_31.result(), "12*coeff")
+SketchConstraintLength_8.setName("SketchConstraintLength_5")
+SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_30.result(), SketchLine_34.endPoint(), "17*coeff")
+SketchConstraintDistance_15.setName("SketchConstraintDistance_9")
+SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_34.result(), "10*coeff")
+SketchConstraintLength_9.setName("SketchConstraintLength_6")
+SketchCircle_10 = Sketch_4.addCircle(0, -9, 4)
+SketchCircle_10.setName("SketchCircle_9")
+SketchCircle_10.result().setName("SketchCircle_9")
+SketchCircle_10.results()[1].setName("SketchCircle_9_2")
+SketchConstraintRadius_11 = Sketch_4.setRadius(SketchCircle_10.results()[1], "M8*coeff")
+SketchConstraintRadius_11.setName("SketchConstraintRadius_8")
+SketchLine_36 = Sketch_4.addLine(0, 0, 0, -12.97564207914519)
+SketchLine_36.setName("SketchLine_25")
+SketchLine_36.result().setName("SketchLine_25")
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_28).startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_29")
+SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_36.result())
+SketchConstraintVertical_8.setName("SketchConstraintVertical_5")
+SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchCircle_10.center(), SketchLine_36.result())
+SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_30")
+SketchConstraintDistance_16 = Sketch_4.setDistance(SketchCircle_10.center(), SketchLine_30.result(), "dtrou*coeff")
+SketchConstraintDistance_16.setName("SketchConstraintDistance_10")
+SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145)
+SketchConstraintLength_10.setName("SketchConstraintLength_7")
+model.do()
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
+Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
+ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")])
+ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")])
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Boolean_2_1/Modified_1"))
+SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchPoint_3.setName("SketchPoint_2")
+SketchPoint_3.result().setName("SketchPoint_2")
+SketchLine_37 = Sketch_5.addLine(-13.96424004376894, -17, -32, -17)
+SketchLine_37.setName("SketchLine_29")
+SketchLine_37.result().setName("SketchLine_29")
+SketchLine_38 = Sketch_5.addLine(-32, 17, -13.96424004376904, 17)
+SketchLine_38.setName("SketchLine_30")
+SketchLine_38.result().setName("SketchLine_30")
+SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_37.result())
+SketchConstraintHorizontal_11.setName("SketchConstraintHorizontal_10")
+SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_38.result())
+SketchConstraintHorizontal_12.setName("SketchConstraintHorizontal_11")
+SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_39.setName("SketchLine_31")
+SketchLine_39.result().setName("SketchLine_31")
+SketchConstraintDistance_17 = Sketch_5.setDistance(SketchLine_37.result(), SketchLine_38.startPoint(), "epaisseur*coeff")
+SketchConstraintDistance_17.setName("SketchConstraintDistance_13")
+SketchArc_19 = Sketch_5.addArc(2.175718373563154e-31, -6.039735315912772e-31, -13.96424004376904, 17, -13.964240043769, -17, False)
+SketchArc_19.setName("SketchArc_5")
+SketchArc_19.result().setName("SketchArc_5")
+SketchArc_19.results()[1].setName("SketchArc_5_2")
+SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchPoint_3.coordinates(), SketchArc_19.center())
+SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_36")
+SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_38.endPoint(), SketchArc_19.startPoint())
+SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_37")
+SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchLine_37.result(), SketchArc_19.endPoint())
+SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_39")
+SketchConstraintRadius_12 = Sketch_5.setRadius(SketchArc_19.results()[1], "r2*coeff")
+SketchConstraintRadius_12.setName("SketchConstraintRadius_11")
+SketchLine_40 = Sketch_5.addLine(-32, -17, -32, 17)
+SketchLine_40.setName("SketchLine_32")
+SketchLine_40.result().setName("SketchLine_32")
+SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchLine_40.endPoint())
+SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_35")
+SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_40.startPoint(), SketchLine_37.endPoint())
+SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_38")
+SketchConstraintDistance_18 = Sketch_5.setDistance(SketchLine_40.result(), SketchArc_19.center(), "d1*coeff-entraxe*coeff")
+SketchConstraintDistance_18.setName("SketchConstraintDistance_14")
+SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_40.result())
+SketchConstraintVertical_9.setName("SketchConstraintVertical_6")
+SketchConstraintDistance_19 = Sketch_5.setDistance(SketchLine_37.result(), SketchArc_19.center(), "epaisseur/2*coeff")
+SketchConstraintDistance_19.setName("SketchConstraintDistance_15")
+SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_19.endPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_40")
+model.do()
+Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchLine_29r-SketchLine_30r-SketchArc_5_2r-SketchLine_32r")], model.selection(), 0, "22*coeff")
+Sketch_6_origin = GeomAPI_Pnt(0, 0, 0)
+Sketch_6_norm = GeomAPI_Dir(0, 1, 0)
+Sketch_6_dirx = GeomAPI_Dir(1, 0, 0)
+Sketch_6 = model.addSketch(Part_1_doc, GeomAPI_Ax3(Sketch_6_origin, Sketch_6_dirx, Sketch_6_norm))
+SketchLine_41 = Sketch_6.addLine(-32, -17, -32, 17)
+SketchLine_41.setName("SketchLine_33")
+SketchLine_41.result().setName("SketchLine_33")
+SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_32s-SketchLine_29e"))
+SketchPoint_4.setName("SketchPoint_3")
+SketchPoint_4.result().setName("SketchPoint_3")
+SketchConstraintCoincidence_60 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result())
+SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_41")
+SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_32e"))
+SketchPoint_5.setName("SketchPoint_4")
+SketchPoint_5.result().setName("SketchPoint_4")
+SketchConstraintCoincidence_61 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchPoint_5.result())
+SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_42")
+SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchPoint_2-SketchArc_5-SketchLine_31s"))
+SketchPoint_6.setName("SketchPoint_5")
+SketchPoint_6.result().setName("SketchPoint_5")
+SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
+SketchLine_42.setName("SketchLine_34")
+SketchLine_42.result().setName("SketchLine_34")
+SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_29"))
+SketchLine_43.setName("SketchLine_35")
+SketchLine_43.result().setName("SketchLine_35")
+SketchArc_20 = Sketch_6.addArc(0, 0, -20.32855135026245, 17, -20.32855135026245, -17, False)
+SketchArc_20.setName("SketchArc_6")
+SketchArc_20.result().setName("SketchArc_6")
+SketchArc_20.results()[1].setName("SketchArc_6_2")
+SketchConstraintCoincidence_62 = Sketch_6.setCoincident(SketchPoint_6.result(), SketchArc_20.center())
+SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_43")
+SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchLine_42.result(), SketchArc_20.startPoint())
+SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_44")
+SketchConstraintCoincidence_64 = Sketch_6.setCoincident(SketchLine_43.result(), SketchArc_20.endPoint())
+SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_45")
+SketchLine_44 = Sketch_6.addLine(-20.32855135026245, -17, -32, -17)
+SketchLine_44.setName("SketchLine_36")
+SketchLine_44.result().setName("SketchLine_36")
+SketchConstraintCoincidence_65 = Sketch_6.setCoincident(SketchArc_20.endPoint(), SketchLine_44.startPoint())
+SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_46")
+SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_44.endPoint())
+SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_47")
+SketchLine_45 = Sketch_6.addLine(-20.32855135026245, 17, -32, 17)
+SketchLine_45.setName("SketchLine_37")
+SketchLine_45.result().setName("SketchLine_37")
+SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchArc_20.startPoint(), SketchLine_45.startPoint())
+SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_48")
+SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.endPoint())
+SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_49")
+SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*coeff")
+SketchConstraintRadius_13.setName("SketchConstraintRadius_10")
+model.do()
+Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0)
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_3"))
+SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15)
+SketchLine_46.setName("SketchLine_38")
+SketchLine_46.result().setName("SketchLine_38")
+SketchLine_46.setAuxiliary(True)
+SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_3&Extrusion_6_1/To_Face_1"))
+SketchLine_47.setName("SketchLine_39")
+SketchLine_47.result().setName("SketchLine_39")
+SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result())
+SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_50")
+SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_2&Extrusion_5_1/From_Face_1"))
+SketchLine_48.setName("SketchLine_40")
+SketchLine_48.result().setName("SketchLine_40")
+SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_48.result())
+SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_51")
+SketchConstraintMiddle_5 = Sketch_7.setMiddlePoint(SketchLine_46.startPoint(), SketchLine_47.result())
+SketchConstraintMiddle_5.setName("SketchConstraintMiddle_2")
+SketchConstraintMiddle_6 = Sketch_7.setMiddlePoint(SketchLine_48.result(), SketchLine_46.endPoint())
+SketchConstraintMiddle_6.setName("SketchConstraintMiddle_3")
+SketchPoint_7 = Sketch_7.addPoint(17, -1.95597787542754e-16)
+SketchPoint_7.setName("SketchPoint_6")
+SketchPoint_7.result().setName("SketchPoint_6")
+SketchConstraintCoincidence_71 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchLine_46.result())
+SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_52")
+SketchProjection_9 = Sketch_7.addProjection(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_49 = SketchProjection_9.createdFeature()
+SketchLine_49.setName("SketchLine_41")
+SketchLine_49.result().setName("SketchLine_41")
+SketchConstraintDistance_20 = Sketch_7.setDistance(SketchLine_49.result(), SketchPoint_7.coordinates(), "(h_o-h_p)*coeff")
+SketchConstraintDistance_20.setName("SketchConstraintDistance_16")
+SketchCircle_11 = Sketch_7.addCircle(17, -1.95597787542754e-16, 2.5)
+SketchCircle_11.setName("SketchCircle_10")
+SketchCircle_11.result().setName("SketchCircle_10")
+SketchCircle_11.results()[1].setName("SketchCircle_10_2")
+SketchConstraintCoincidence_72 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchCircle_11.center())
+SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_53")
+SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3")
+SketchConstraintRadius_14.setName("SketchConstraintRadius_12")
+model.do()
+ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
+ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_2"))
+SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14)
+SketchLine_50.setName("SketchLine_56")
+SketchLine_50.result().setName("SketchLine_56")
+SketchLine_50.setAuxiliary(True)
+SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_2&Extrusion_6_1/To_Face_1"))
+SketchLine_51.setName("SketchLine_57")
+SketchLine_51.result().setName("SketchLine_57")
+SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result())
+SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81")
+SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result())
+SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82")
+SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_2"))
+SketchLine_52.setName("SketchLine_58")
+SketchLine_52.result().setName("SketchLine_58")
+SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True)
+SketchArc_21.setName("SketchArc_23")
+SketchArc_21.result().setName("SketchArc_23")
+SketchArc_21.results()[1].setName("SketchArc_23_2")
+SketchConstraintCoincidence_75 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchArc_21.startPoint())
+SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_83")
+SketchConstraintTangent_6 = Sketch_8.setTangent(SketchLine_50.result(), SketchArc_21.results()[1])
+SketchConstraintCoincidence_76 = Sketch_8.setCoincident(SketchLine_52.result(), SketchArc_21.endPoint())
+SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_84")
+SketchConstraintTangent_7 = Sketch_8.setTangent(SketchArc_21.results()[1], SketchLine_52.result())
+SketchLine_53 = Sketch_8.addLine(34.00000002238511, -17, 37, -17)
+SketchLine_53.setName("SketchLine_59")
+SketchLine_53.result().setName("SketchLine_59")
+SketchConstraintCoincidence_77 = Sketch_8.setCoincident(SketchArc_21.endPoint(), SketchLine_53.startPoint())
+SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_85")
+SketchConstraintCoincidence_78 = Sketch_8.setCoincident(SketchLine_51.startPoint(), SketchLine_53.endPoint())
+SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_86")
+SketchLine_54 = Sketch_8.addLine(37, -14, 37, -17)
+SketchLine_54.setName("SketchLine_60")
+SketchLine_54.result().setName("SketchLine_60")
+SketchConstraintCoincidence_79 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_54.startPoint())
+SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_87")
+SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_51.startPoint(), SketchLine_54.endPoint())
+SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_88")
+SketchConstraintRadius_15 = Sketch_8.setRadius(SketchArc_21.results()[1], "3*coeff")
+SketchConstraintRadius_15.setName("SketchConstraintRadius_16")
+SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_38"))
+SketchLine_55.setName("SketchLine_61")
+SketchLine_55.result().setName("SketchLine_61")
+SketchConstraintMirror_2_objects = [SketchArc_21.results()[1], SketchLine_54.result(), SketchLine_53.result()]
+SketchConstraintMirror_2 = Sketch_8.addMirror(SketchLine_55.result(), SketchConstraintMirror_2_objects)
+[SketchArc_22, SketchLine_56, SketchLine_57] = SketchConstraintMirror_2.mirrored()
+SketchLine_57.setName("SketchLine_63")
+SketchLine_57.result().setName("SketchLine_63")
+SketchLine_56.setName("SketchLine_62")
+SketchLine_56.result().setName("SketchLine_62")
+SketchArc_22.setName("SketchArc_24")
+SketchArc_22.result().setName("SketchArc_24")
+SketchArc_22.results()[1].setName("SketchArc_24_2")
+model.do()
+ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")])
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_3"))
+SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699)
+SketchLine_58.setName("SketchLine_64")
+SketchLine_58.result().setName("SketchLine_64")
+SketchLine_58.setAuxiliary(True)
+SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/Generated_Face_2"))
+SketchLine_59.setName("SketchLine_65")
+SketchLine_59.result().setName("SketchLine_65")
+SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
+SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89")
+SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result())
+SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90")
+SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/From_Face_1"))
+SketchLine_60.setName("SketchLine_66")
+SketchLine_60.result().setName("SketchLine_66")
+SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False)
+SketchArc_23.setName("SketchArc_25")
+SketchArc_23.result().setName("SketchArc_25")
+SketchArc_23.results()[1].setName("SketchArc_25_2")
+SketchConstraintCoincidence_83 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchArc_23.startPoint())
+SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_91")
+SketchConstraintTangent_8 = Sketch_9.setTangent(SketchLine_58.result(), SketchArc_23.results()[1])
+SketchConstraintCoincidence_84 = Sketch_9.setCoincident(SketchLine_60.result(), SketchArc_23.endPoint())
+SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_92")
+SketchConstraintTangent_9 = Sketch_9.setTangent(SketchArc_23.results()[1], SketchLine_60.result())
+SketchLine_61 = Sketch_9.addLine(-32, -19, -32, -22)
+SketchLine_61.setName("SketchLine_67")
+SketchLine_61.result().setName("SketchLine_67")
+SketchConstraintCoincidence_85 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_61.startPoint())
+SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_93")
+SketchConstraintCoincidence_86 = Sketch_9.setCoincident(SketchLine_59.startPoint(), SketchLine_61.endPoint())
+SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_94")
+SketchLine_62 = Sketch_9.addLine(-32, -22, -29.00002201340376, -22)
+SketchLine_62.setName("SketchLine_68")
+SketchLine_62.result().setName("SketchLine_68")
+SketchConstraintCoincidence_87 = Sketch_9.setCoincident(SketchLine_59.startPoint(), SketchLine_62.startPoint())
+SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_95")
+SketchConstraintCoincidence_88 = Sketch_9.setCoincident(SketchArc_23.endPoint(), SketchLine_62.endPoint())
+SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_96")
+SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coeff")
+SketchConstraintRadius_16.setName("SketchConstraintRadius_17")
+model.do()
+ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")])
+model.do()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Part_1, 1)
+model.testNbSubResults(Part_1, [0])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [6])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [85])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [444])
+model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [888])
+model.testResultsVolumes(Part_1, [118190.673218984])
+
+# checking for parametric update
+Parameter_Epaisseur.setValue(33)
+model.do()
+model.testResultsVolumes(Part_1, [117340.407981679])
+Parameter_Epaisseur.setValue(34)
+model.end()
+
+assert(model.checkPythonDump())