Task 5.1.7: To be able to export a part to a file and import it into an existing...

Add unit tests.

diff --git a/src/ExchangePlugin/CMakeLists.txt b/src/ExchangePlugin/CMakeLists.txt
index 875a0a917ff51830924a5f030007ec7ba34b5501..d52a448586b247489f303cbb1af71948e3a2b116 100644 (file)
--- a/src/ExchangePlugin/CMakeLists.txt
+++ b/src/ExchangePlugin/CMakeLists.txt
@@ -84,11 +84,33 @@ INSTALL(FILES ${XML_RESOURCES} DESTINATION ${SHAPER_INSTALL_XML_RESOURCES})
 INSTALL(DIRECTORY icons/ DESTINATION ${SHAPER_INSTALL_XML_RESOURCES}/icons/Exchange)
 INSTALL(FILES ${TEXT_RESOURCES} DESTINATION ${SHAPER_INSTALL_XML_RESOURCES})
 
-ADD_UNIT_TESTS(TestImport.py
-               TestExport.py
-               Test2290.py
-               Test2459.py
-               TestExportToXAOWithFields.py
-               TestExportToXAOWithGroupNotUpdated.py
-               TestExport_FiniteValidator.py
+ADD_UNIT_TESTS(
+  TestImport.py
+  TestExport.py
+  Test2290.py
+  Test2459.py
+  TestExportToXAOWithFields.py
+  TestExportToXAOWithGroupNotUpdated.py
+  TestExport_FiniteValidator.py
+  TestExportPart_Failure_1.py
+  TestExportPart_Failure_2.py
+  TestExportPart_Failure_3.py
+  TestExportPart_FullPartSet.py
+  TestExportPart_FullPart_1.py
+  TestExportPart_FullPart_2.py
+  TestExportPart_PartSet.py
+  TestExportPart_Results_1.py
+  TestExportPart_Results_2.py
+  TestExportPart_Results_3.py
+  TestExportPart_Results_4.py
+  TestExportPart_Results_5.py
+  TestExportPart_Results_6.py
+  TestExportPart_Results_7.py
+  TestExportPart_Results_8.py
+  TestImportPart_Construction_1.py
+  TestImportPart_Construction_2.py
+  TestImportPart_Construction_3.py
+  TestImportPart_Construction_4.py
+  TestImportPart_ToEmptyPart.py
+  TestImportPart_ToEmptyPartSet.py
 )

diff --git a/src/ExchangePlugin/Test/TestExportPart_Failure_1.py b/src/ExchangePlugin/Test/TestExportPart_Failure_1.py
new file mode 100644 (file)
index 0000000..399ca21
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Failure_1.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(partSet, filename, [Part_1.result()])
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting result of Part_1 should fail"

diff --git a/src/ExchangePlugin/Test/TestExportPart_Failure_2.py b/src/ExchangePlugin/Test/TestExportPart_Failure_2.py
new file mode 100644 (file)
index 0000000..0f11b38
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Failure_2.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Box_1
+
+model.begin()
+model.exportPart(Part_1_doc, filename, [featureToExport.result()])
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of {} from document {} should fail".format(featureToExport.name(), Part_1.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Failure_3.py b/src/ExchangePlugin/Test/TestExportPart_Failure_3.py
new file mode 100644 (file)
index 0000000..b5fc215
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Failure_3.py
@@ -0,0 +1,40 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+model.do()
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Part_1/[Box_1_1/Front][Box_1_1/Right][Box_1_1/Top]"))
+Translation_1 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_1/")], model.selection("EDGE", "Axis_4"), 10)
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(partSet, filename)
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of PartSet should fail"

diff --git a/src/ExchangePlugin/Test/TestExportPart_FullPartSet.py b/src/ExchangePlugin/Test/TestExportPart_FullPartSet.py
new file mode 100644 (file)
index 0000000..e42df1e
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_FullPartSet.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(partSet, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Failed to export full PartSet"

diff --git a/src/ExchangePlugin/Test/TestExportPart_FullPart_1.py b/src/ExchangePlugin/Test/TestExportPart_FullPart_1.py
new file mode 100644 (file)
index 0000000..ae5a2f3
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_FullPart_1.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(Part_1_doc, filename)
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of Part_1 should fail"

diff --git a/src/ExchangePlugin/Test/TestExportPart_FullPart_2.py b/src/ExchangePlugin/Test/TestExportPart_FullPart_2.py
new file mode 100644 (file)
index 0000000..29db870
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_FullPart_2.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(Part_2_doc, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export Part_2 to file {}".format(filename)

diff --git a/src/ExchangePlugin/Test/TestExportPart_PartSet.py b/src/ExchangePlugin/Test/TestExportPart_PartSet.py
new file mode 100644 (file)
index 0000000..1031a79
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_PartSet.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+model.begin()
+model.exportPart(partSet, filename, [Axis_4.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export construction elements of PartSet"

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_1.py b/src/ExchangePlugin/Test/TestExportPart_Results_1.py
new file mode 100644 (file)
index 0000000..002c09a
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_1.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Point_2
+
+model.begin()
+model.exportPart(partSet, filename, [featureToExport.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export feature {}".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_2.py b/src/ExchangePlugin/Test/TestExportPart_Results_2.py
new file mode 100644 (file)
index 0000000..590da1f
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_2.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Axis_4
+
+model.begin()
+model.exportPart(partSet, filename, [featureToExport.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export feature {}".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_3.py b/src/ExchangePlugin/Test/TestExportPart_Results_3.py
new file mode 100644 (file)
index 0000000..1dddcb2
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_3.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Sketch_1
+
+model.begin()
+model.exportPart(Part_1_doc, filename, [featureToExport.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export feature {}".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_4.py b/src/ExchangePlugin/Test/TestExportPart_Results_4.py
new file mode 100644 (file)
index 0000000..63ffb43
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_4.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Extrusion_1
+
+model.begin()
+model.exportPart(Part_1_doc, filename, [featureToExport.result()])
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of {} should fail".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_5.py b/src/ExchangePlugin/Test/TestExportPart_Results_5.py
new file mode 100644 (file)
index 0000000..7d19292
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_5.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Sketch_2
+
+model.begin()
+model.exportPart(Part_1_doc, filename, [featureToExport.result()])
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of {} should fail".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_6.py b/src/ExchangePlugin/Test/TestExportPart_Results_6.py
new file mode 100644 (file)
index 0000000..b4ca20e
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_6.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Revolution_1
+
+model.begin()
+model.exportPart(Part_1_doc, filename, [featureToExport.result()])
+model.end()
+assert not os.path.exists(filename), "ERROR: Exporting of {} should fail".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_7.py b/src/ExchangePlugin/Test/TestExportPart_Results_7.py
new file mode 100644 (file)
index 0000000..5d8e9cb
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_7.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Box_1
+
+model.begin()
+model.exportPart(Part_2_doc, filename, [featureToExport.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export feature {}".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestExportPart_Results_8.py b/src/ExchangePlugin/Test/TestExportPart_Results_8.py
new file mode 100644 (file)
index 0000000..7381f5e
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestExportPart_Results_8.py
@@ -0,0 +1,74 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Point_2 = model.addPoint(partSet, 100, 100, 100)
+Axis_4 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "PartSet/Axis_4"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+
+Part_2 = model.addPart(partSet)
+Part_2_doc = Part_2.document()
+Box_1 = model.addBox(Part_2_doc, 10, 10, 10)
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 100)
+model.do()
+
+model.end()
+
+import os
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+featureToExport = Translation_1
+
+model.begin()
+model.exportPart(Part_2_doc, filename, [featureToExport.result()])
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export feature {}".format(featureToExport.name())

diff --git a/src/ExchangePlugin/Test/TestImportPart_Construction_1.py b/src/ExchangePlugin/Test/TestImportPart_Construction_1.py
new file mode 100644 (file)
index 0000000..17b64d1
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_Construction_1.py
@@ -0,0 +1,82 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+# PartSet => PartSet
+
+model.begin()
+partSet = model.moduleDocument()
+Point_1 = model.addPoint(partSet, 100, 100, 100)
+Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+model.end()
+
+# store the reference data
+features = partSet.allFeatures()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(partSet, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export PartSet"
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+model.importPart(partSet, filename)
+model.end()
+
+# Test 1. No Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 0)
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = partSet.allFeatures()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())

diff --git a/src/ExchangePlugin/Test/TestImportPart_Construction_2.py b/src/ExchangePlugin/Test/TestImportPart_Construction_2.py
new file mode 100644 (file)
index 0000000..5ece48c
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_Construction_2.py
@@ -0,0 +1,86 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+# PartSet => Part
+
+model.begin()
+partSet = model.moduleDocument()
+Point_1 = model.addPoint(partSet, 100, 100, 100)
+Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(partSet, model.selection("VERTEX", "Origin"), model.selection("VERTEX", "Point_2"))
+model.end()
+
+# store the reference data (without Origin, coordinate axes and planes)
+features = partSet.allFeatures()
+for i in range(0, 7):
+    features.pop_front()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(partSet, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export PartSet"
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.importPart(Part_1_doc, filename)
+model.end()
+
+# Test 1. No Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 1)
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = Part_1_doc.allFeatures()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())

diff --git a/src/ExchangePlugin/Test/TestImportPart_Construction_3.py b/src/ExchangePlugin/Test/TestImportPart_Construction_3.py
new file mode 100644 (file)
index 0000000..a9e1236
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_Construction_3.py
@@ -0,0 +1,87 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+# Part => PartSet
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_1 = model.addPoint(Part_1_doc, 100, 100, 100)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("VERTEX", "Point_1"))
+model.end()
+
+# store the reference data
+features = Part_1_doc.allFeatures()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(Part_1_doc, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export {}".format(Part_1.name())
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+model.importPart(partSet, filename)
+model.end()
+
+# Test 1. No new Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 0)
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = partSet.allFeatures()
+for i in range(0, 7):
+    # exclude Origin, coordinate axes and planes
+    features.pop_front()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())

diff --git a/src/ExchangePlugin/Test/TestImportPart_Construction_4.py b/src/ExchangePlugin/Test/TestImportPart_Construction_4.py
new file mode 100644 (file)
index 0000000..441ae9a
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_Construction_4.py
@@ -0,0 +1,86 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+# Part => Part
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_1 = model.addPoint(Part_1_doc, 100, 100, 100)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("VERTEX", "Point_1"))
+model.end()
+
+# store the reference data
+features = Part_1_doc.allFeatures()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(Part_1_doc, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export {}".format(Part_1.name())
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.importPart(Part_1_doc, filename)
+model.end()
+
+# Test 1. No new Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 1)
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = Part_1_doc.allFeatures()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())

diff --git a/src/ExchangePlugin/Test/TestImportPart_ToEmptyPart.py b/src/ExchangePlugin/Test/TestImportPart_ToEmptyPart.py
new file mode 100644 (file)
index 0000000..fd66559
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_ToEmptyPart.py
@@ -0,0 +1,102 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_1 = model.addPoint(Part_1_doc, 100, 100, 100)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("VERTEX", "Point_1"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "Axis_1"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+model.end()
+
+# store the reference data
+features = Part_1_doc.allFeatures()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(Part_1_doc, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export {}".format(Part_1.name())
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.importPart(Part_1_doc, filename)
+model.end()
+
+# Test 1. No new Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 1)
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = Part_1_doc.allFeatures()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())

diff --git a/src/ExchangePlugin/Test/TestImportPart_ToEmptyPartSet.py b/src/ExchangePlugin/Test/TestImportPart_ToEmptyPartSet.py
new file mode 100644 (file)
index 0000000..670f11a
--- /dev/null
+++ b/src/ExchangePlugin/Test/TestImportPart_ToEmptyPartSet.py
@@ -0,0 +1,102 @@
+# Copyright (C) 2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from GeomAlgoAPI import *
+from ModelAPI import *
+from SketchAPI import *
+from salome.shaper import model
+
+import os
+import math
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_1 = model.addPoint(Part_1_doc, 100, 100, 100)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchCircle_1 = Sketch_1.addCircle(0, 0, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 30)
+model.do()
+Axis_1 = model.addAxis(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("VERTEX", "Point_1"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")], model.selection("EDGE", "Axis_1"), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_1 = Sketch_2.addLine(57.73502691896258, 57.73502691896258, 71.87716254269353, 43.59289129523163)
+SketchLine_2 = Sketch_2.addLine(71.87716254269353, 43.59289129523163, 71.87716254269353, 71.87716254269353)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(71.87716254269353, 71.87716254269353, 57.73502691896258, 57.73502691896258)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_2.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchCircle_1_2][Extrusion_1_1/To_Face]__cc"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_2).coordinates(), SketchLine_1.startPoint())
+SketchConstraintLength_1 = Sketch_2.setLength(SketchLine_1.result(), 20)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f")], model.selection("EDGE", "PartSet/OX"), 180, 0)
+model.do()
+model.end()
+
+# store the reference data
+features = Part_1_doc.allFeatures()
+refData = []
+for feat in features:
+    res = []
+    for r in feat.results():
+        res.append(GeomAlgoAPI_ShapeTools.volume(r.shape()))
+    refData.append( (feat.getKind(), res) )
+
+filename = model.tempFileName()
+model.removeFile(filename)
+
+# emport the document
+model.begin()
+model.exportPart(Part_1_doc, filename)
+model.end()
+assert os.path.exists(filename), "ERROR: Cannot export {}".format(Part_1.name())
+
+# close all documents
+model.reset()
+
+# import the document
+model.begin()
+partSet = model.moduleDocument()
+model.importPart(partSet, filename)
+model.end()
+
+# Test 1. New Part should be created
+assert(partSet.size(ModelAPI_ResultPart.group()) == 1)
+newPart = modelAPI_ResultPart(objectToResult(partSet.object(ModelAPI_ResultPart.group(), 0)))
+newPart_doc = newPart.partDoc()
+
+# Test 2. Compare results with the reference data
+TOLERANCE = 1.e-7
+features = newPart_doc.allFeatures()
+assert(len(features) == len(refData))
+for feat, ref in zip(features, refData):
+    assert(feat.getKind() == ref[0])
+    for fv, rv in zip(feat.results(), ref[1]):
+        assert(math.fabs(GeomAlgoAPI_ShapeTools.volume(fv.shape()) - rv) < TOLERANCE)
+
+assert(model.checkPythonDump())