Checking performance of sketch recalculation.
TestHighload.py
TestSnowflake.py
TestArcBehavior.py
+ TestRemoveSketch.py
Test1061.py
+ Test1673.py
Test1924.py
- TestRemoveSketch.py )
+ Test1966.py
+ Test1967.py
+)
--- /dev/null
+"""
+ Test1673.py
+ Test case for issue #1673 "Drag and drop the extremity of an arc is too slow"
+"""
+
+from salome.shaper import model
+from timeit import default_timer as timer
+import math
+
+# convenient ratio of time moving point to time creating sketch
+MOVE_BUILD_RATIO = 0.1
+# tolerance for comparison of reals
+TOLERANCE = 1.e-7
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "ep_jupe", "0.188")
+model.addParameter(Part_1_doc, "width_gallery", "1.5")
+model.addParameter(Part_1_doc, "h_bas_dome", "9.025")
+model.addParameter(Part_1_doc, "r_dome", "9.794")
+model.addParameter(Part_1_doc, "demi_ep_dome", "0.082")
+
+# time to build sketch
+sketchTime = timer()
+
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-6.538, -3.45, -7.782, -3.45)
+SketchLine_1.setName("SketchLine_2")
+SketchLine_1.result().setName("SketchLine_2")
+SketchLine_2 = Sketch_1.addLine(-7.782, -3.45, -7.782, -6.45)
+SketchLine_2.setName("SketchLine_3")
+SketchLine_2.result().setName("SketchLine_3")
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
+SketchLine_3 = Sketch_1.addLine(-7.782, -6.45, 0, -6.45)
+SketchLine_3.setName("SketchLine_4")
+SketchLine_3.result().setName("SketchLine_4")
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
+SketchLine_4 = Sketch_1.addLine(0, -6.45, 0, -3.45)
+SketchLine_4.setName("SketchLine_5")
+SketchLine_4.result().setName("SketchLine_5")
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
+SketchLine_5 = Sketch_1.addLine(0, -3.45, -6.188, -3.45)
+SketchLine_5.setName("SketchLine_6")
+SketchLine_5.result().setName("SketchLine_6")
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
+SketchLine_6 = Sketch_1.addLine(-6.188, -3.45, -6.188, 9.025)
+SketchLine_6.setName("SketchLine_7")
+SketchLine_6.result().setName("SketchLine_7")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintVertical_2.setName("SketchConstraintVertical_3")
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_4.result())
+SketchConstraintVertical_3.setName("SketchConstraintVertical_4")
+SketchLine_7 = Sketch_1.addLine(-6.376, 9.025, -6.376, -2.25)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_8 = Sketch_1.addLine(-6.376, -2.25, -6.538, -2.4)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
+SketchLine_9 = Sketch_1.addLine(-6.538, -2.4, -6.538, -3.45)
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_9.endPoint())
+SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintVertical_4.setName("SketchConstraintVertical_5")
+SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_5.setName("SketchConstraintVertical_6")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_2.result())
+SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchPoint_1.coordinates(), SketchLine_5.result(), 3.45)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchPoint_1.coordinates(), SketchLine_6.result(), 6.188)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_9.result(), 0.35)
+SketchConstraintDistance_3.setName("SketchConstraintDistance_4")
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_7.result(), "ep_jupe")
+SketchConstraintDistance_4.setName("SketchConstraintDistance_5")
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), 3)
+SketchLine_10 = Sketch_1.addLine(-6.282, 0.5300728101808314, -6.282, -4.926040141145169)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchLine_10.setAuxiliary(True)
+SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_10.result())
+SketchConstraintVertical_6.setName("SketchConstraintVertical_7")
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_10.result(), "ep_jupe/2")
+SketchConstraintDistance_5.setName("SketchConstraintDistance_6")
+SketchLine_11 = Sketch_1.addLine(-5.532, -4.05, -7.032, -4.05)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchLine_12 = Sketch_1.addLine(-7.032, -4.05, -7.032, -5.85)
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_13 = Sketch_1.addLine(-7.032, -5.85, -5.532, -5.85)
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_14 = Sketch_1.addLine(-5.532, -5.85, -5.532, -4.05)
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_12.result())
+SketchConstraintVertical_7.setName("SketchConstraintVertical_8")
+SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_14.result())
+SketchConstraintVertical_8.setName("SketchConstraintVertical_9")
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_13.result(), "width_gallery")
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_14.result(), 1.8)
+SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_11.startPoint(), SketchLine_10.result(), "width_gallery/2")
+SketchConstraintDistance_6.setName("SketchConstraintDistance_7")
+SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_12.startPoint(), SketchLine_1.result(), 0.6)
+SketchConstraintDistance_7.setName("SketchConstraintDistance_8")
+SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_10.result(), "width_gallery")
+SketchConstraintDistance_8.setName("SketchConstraintDistance_9")
+SketchLine_15 = Sketch_1.addLine(model.selection("VERTEX", "PartSet/OZ"))
+SketchLine_15.setName("Axis_Z")
+SketchLine_15.result().setName("Axis_Z")
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_15.result())
+SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
+SketchLine_16 = Sketch_1.addLine(model.selection("VERTEX", "PartSet/OX"))
+SketchLine_16.setName("Axis_X")
+SketchLine_16.result().setName("Axis_X")
+SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_8.startPoint(), SketchLine_16.result(), 2.25)
+SketchConstraintDistance_9.setName("SketchConstraintDistance_10")
+SketchLine_17 = Sketch_1.addLine(-6.376, -2.25, -7.479754760955, -2.25)
+SketchLine_17.setAuxiliary(True)
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
+SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_17.result())
+SketchConstraintDistance_10 = Sketch_1.setDistance(SketchLine_9.startPoint(), SketchLine_17.result(), 0.15)
+SketchConstraintDistance_10.setName("SketchConstraintDistance_11")
+SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_16.result(), "h_bas_dome")
+SketchConstraintDistance_11.setName("SketchConstraintDistance_12")
+SketchConstraintDistance_12 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_16.result(), "h_bas_dome")
+SketchConstraintDistance_12.setName("SketchConstraintDistance_13")
+SketchLine_18 = Sketch_1.addLine(-6.188, 9.025, -6.082, 9.532)
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
+SketchLine_19 = Sketch_1.addLine(-6.376, 9.025, -6.538, 9.187)
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
+SketchLine_20 = Sketch_1.addLine(-6.538, 9.187, -6.538, 10.256)
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
+SketchLine_21 = Sketch_1.addLine(-6.538, 10.256, -6.188, 10.256)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
+SketchConstraintDistance_13 = Sketch_1.setDistance(SketchLine_19.endPoint(), SketchLine_16.result(), 9.187)
+SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
+SketchConstraintDistance_14 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_20.result(), 0.35)
+SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
+SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_20.result())
+SketchConstraintVertical_9.setName("SketchConstraintVertical_10")
+SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_20.result())
+SketchConstraintVertical_10.setName("SketchConstraintVertical_11")
+SketchLine_22 = Sketch_1.addLine(-6.376, 9.025, -7.650292531, 9.025)
+SketchLine_22.setAuxiliary(True)
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_22.startPoint())
+SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_19.startPoint(), SketchLine_22.startPoint())
+SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
+SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_22.result())
+SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_21.result())
+SketchLine_23 = Sketch_1.addLine(-6.188, 10.256, -4.938, 10.97786688777511)
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
+SketchArc_1 = Sketch_1.addArc(0, 2.425, -4.938, 10.97786688777511, 0, 12.301, True)
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_15.result())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_15.result())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
+SketchConstraintDistance_15 = Sketch_1.setDistance(SketchLine_16.result(), SketchArc_1.center(), 2.425)
+SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "r_dome+demi_ep_dome")
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_21.result(), 0.35)
+SketchLine_24 = Sketch_1.addLine(-4.938, 10.97786688777511, 0, 2.425)
+SketchLine_24.setAuxiliary(True)
+SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_24.startPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
+SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_24.endPoint())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
+SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_24.result(), SketchLine_15.result(), 30)
+SketchConstraintDistance_16 = Sketch_1.setDistance(SketchLine_20.endPoint(), SketchLine_16.result(), 10.256)
+SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
+SketchConstraintDistance_17 = Sketch_1.setDistance(SketchLine_18.endPoint(), SketchLine_16.result(), 9.532)
+SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
+SketchConstraintDistance_18 = Sketch_1.setDistance(SketchLine_18.endPoint(), SketchLine_6.result(), 0.106)
+SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
+SketchArc_2 = Sketch_1.addArc(-4.79378612024245, 9.263, -6.082, 9.532, -6.022198038184096, 9.735080670922804, True)
+SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
+SketchConstraintDistance_19 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_16.result(), 9.263)
+SketchConstraintDistance_19.setName("SketchConstraintDistance_20")
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 1.316)
+SketchPoint_2 = Sketch_1.addPoint(0, 0)
+SketchLine_25 = Sketch_1.addLine(-4.79378612024245, 9.263, -4.793786120242411, 9.813514482867)
+SketchLine_25.setAuxiliary(True)
+SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_25.startPoint())
+SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
+SketchConstraintVertical_11 = Sketch_1.setVertical(SketchLine_25.result())
+SketchConstraintVertical_11.setName("SketchConstraintVertical_12")
+model.do()
+
+sketchTime = timer() - sketchTime
+print "Sketch creation time: {0}".format(sketchTime)
+expectedTime = MOVE_BUILD_RATIO * sketchTime
+averageTime = 0
+nbMoves = 0
+
+# Sketch is overconstrained, check the message
+assert Sketch_1.solverError().value() != "", "FAILED: Sketch should report over-constrained situation"
+
+# Remove duplicated Vertical constraints
+Part_1_doc.removeFeature(SketchConstraintVertical_10.feature())
+model.do()
+assert Sketch_1.solverError().value() == "", "FAILED: Sketch should NOT report over-constrained situation"
+
+#=========================================================================
+# Move end point of SketchArc_2
+#=========================================================================
+aCenter = SketchArc_2.center()
+aEndPoint = SketchArc_2.endPoint()
+aDeltaX = aEndPoint.x() - aCenter.x()
+aDeltaY = aEndPoint.y() - aCenter.y()
+
+anAngle = math.pi / 100.
+aCos = math.cos(anAngle)
+aSin = math.sin(anAngle)
+
+for ang in range(0, 50):
+ movementTime = timer()
+ X = aCenter.x() + aDeltaX * aCos + aDeltaY * aSin
+ Y = aCenter.y() - aDeltaX * aSin + aDeltaY * aCos
+ aEndPoint.setValue(X, Y)
+ model.do()
+ movementTime = timer() - movementTime
+ print movementTime
+ assert movementTime < expectedTime, "Time to move point {0} is greater than expected {1}".format(movementTime, expectedTime)
+ assert math.fabs(aEndPoint.x() - X) < TOLERANCE and math.fabs(aEndPoint.y() - Y) < TOLERANCE, "({0}, {1}) != ({2}, {3})".format(aEndPoint.x(), aEndPoint.y(), X, Y)
+ averageTime += movementTime
+ nbMoves += 1
+ aDeltaX = aEndPoint.x() - aCenter.x()
+ aDeltaY - aEndPoint.y() - aCenter.y()
+print "Movement average time: {0}".format(averageTime / nbMoves)
+
+model.end()
+
+
+assert(model.checkPythonDump())
--- /dev/null
+"""
+ Test1966.py
+ Test case for issue #1966 "Sketch solving is 25 times slower between two studies with middle point"
+"""
+
+from salome.shaper import model
+from timeit import default_timer as timer
+import math
+
+# convenient ratio of time moving point to time creating sketch
+MOVE_BUILD_RATIO = 0.1
+# tolerance for comparison of reals
+TOLERANCE = 1.e-7
+
+#=========================================================================
+# Auxiliary functions
+#=========================================================================
+def angle(theStartPoint1, theEndPoint1, theStartPoint2, theEndPoint2):
+ # subroutine to calculate angle between two lines
+ aDirX1 = theEndPoint1.x() - theStartPoint1.x()
+ aDirY1 = theEndPoint1.y() - theStartPoint1.y()
+ aLen1 = math.hypot(aDirX1, aDirY1)
+ aDirX2 = theEndPoint2.x() - theStartPoint2.x()
+ aDirY2 = theEndPoint2.y() - theStartPoint2.y()
+ aLen2 = math.hypot(aDirX2, aDirY2)
+
+ aDot = aDirX1 * aDirX2 + aDirY1 * aDirY2
+
+ anAngle = math.acos(aDot / aLen1 / aLen2)
+ return round(anAngle * 180. / math.pi, 6)
+
+#=========================================================================
+# Initial model
+#=========================================================================
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "ep_jupe", "0.188")
+
+# time to build sketch
+sketchTime = timer()
+
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-6.376, 9.025, -6.376, -2.25)
+SketchLine_2 = Sketch_1.addLine(-6.376, -2.25, -6.538, -2.4)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-6.538, -2.4, -6.538, -3.45)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-6.538, -3.45, -7.782, -3.45)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-7.782, -3.45, -7.782, -6.45)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(-7.782, -6.45, 0, -6.45)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(0, -6.45, 0, -3.45)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(0, -3.45, -6.188, -3.45)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(-6.188, -3.45, -6.188, 9.025)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_1.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_4.result())
+SketchLine_10 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_10.result())
+SketchLine_11 = Sketch_1.addLine(-6.376, 9.025, -6.538, 9.187)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_11.startPoint())
+SketchLine_12 = Sketch_1.addLine(-6.538, 9.187, -6.538, 10.256)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_1.addLine(-6.538, 10.256, -6.188, 10.256)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_1.addLine(-6.188, 9.025, -6.084266646261868, 9.523738867722166)
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), "ep_jupe")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_9.result(), 0.35)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_10.result(), 6.188)
+SketchLine_15 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_15.result(), 9.025)
+SketchLine_16 = Sketch_1.addLine(-6.376, 9.025, -6.188, 9.025)
+SketchLine_16.setAuxiliary(True)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_16.endPoint())
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_14.startPoint(), SketchLine_16.endPoint())
+SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_16.result())
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_15.result(), 2.25)
+SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_15.result(), 2.4)
+SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_15.result(), 3.45)
+SketchLine_17 = Sketch_1.addLine(-6.282, 9.025, -6.282, -4.050005366189866)
+SketchLine_17.setAuxiliary(True)
+SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_17.result())
+SketchPoint_1 = Sketch_1.addPoint(-6.282, 9.025)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchPoint_1.coordinates())
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_16.result())
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_16.result())
+SketchLine_18 = Sketch_1.addLine(-5.532, -4.050005366189866, -7.032, -4.050005366189866)
+SketchLine_19 = Sketch_1.addLine(-7.032, -4.050005366189866, -7.032, -5.850005366189865)
+SketchLine_20 = Sketch_1.addLine(-7.032, -5.850005366189865, -5.532, -5.850005366189865)
+SketchLine_21 = Sketch_1.addLine(-5.532, -5.850005366189865, -5.532, -4.050005366189866)
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
+SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_19.result())
+SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result())
+SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_21.result())
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_20.result(), 1.5)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_19.result(), 1.8)
+SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.result())
+SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_18.result(), SketchLine_17.endPoint())
+SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5)
+SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_17.result(), 0.256)
+SketchConstraintDistance_10 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_15.result(), 9.187)
+SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_12.endPoint(), SketchLine_15.result(), 10.256)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_13.result(), 0.35)
+SketchLine_22 = Sketch_1.addLine(-6.188, 10.256, -4.938, 10.97786688777511)
+SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_22.startPoint())
+SketchArc_1 = Sketch_1.addArc(-4.794548536090929, 9.26204592494933, -6.084266646261868, 9.523738867722166, -5.676829966640709, 10.23848613167324, True)
+SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchArc_1.startPoint())
+SketchLine_23 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -4.794548536090929, 9.26204592494933)
+SketchLine_23.setAuxiliary(True)
+SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchArc_1.center())
+SketchArc_2 = Sketch_1.addArc(0, 2.425, -4.938, 10.97786688777511, 0, 12.301, True)
+SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_10.result())
+SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_10.result())
+SketchConstraintDistance_12 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_15.result(), 2.425)
+SketchLine_24 = Sketch_1.addLine(0, 12.301, 0, 12.137)
+SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_24.startPoint())
+SketchArc_3 = Sketch_1.addArc(0, 2.425, -5.877900790328188, 10.25907418263698, 2.067397663006541, 11.99831201324782, True)
+SketchArc_3.setName("SketchArc_4")
+SketchArc_3.result().setName("SketchArc_4")
+SketchArc_3.results()[1].setName("SketchArc_4_2")
+SketchArc_3.setAuxiliary(True)
+SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_3.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 9.794)
+SketchPoint_2 = Sketch_1.addPoint(0, 12.219)
+SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_24.result())
+SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_3.results()[1])
+SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_24.result())
+SketchLine_25 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.417460848824602, 10.45671600291324)
+SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_25.startPoint())
+SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_25.startPoint())
+SketchLine_26 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.143396378647499, 10.65615482129426)
+SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
+SketchLine_27 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -4.856000000000008, 10.83583872155447)
+SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
+SketchArc_4 = Sketch_1.addArc(0, 2.425, -4.856, 10.83583872155447, 0, 12.137, True)
+SketchArc_4.setName("SketchArc_5")
+SketchArc_4.result().setName("SketchArc_5")
+SketchArc_4.results()[1].setName("SketchArc_5_2")
+SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
+SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_4.center())
+SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchArc_4.endPoint())
+SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_24.result(), "0.082*2")
+SketchLine_28 = Sketch_1.addLine(-4.938, 10.97786688777511, 0, 2.425)
+SketchLine_28.setAuxiliary(True)
+SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_27.endPoint())
+SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_28.result(), SketchLine_10.result(), 30)
+SketchLine_29 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, 0, 2.425)
+SketchLine_29.setAuxiliary(True)
+SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_29.startPoint())
+SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_29.result(), SketchLine_10.result(), 32)
+SketchLine_30 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, 0, 2.425)
+SketchLine_30.setAuxiliary(True)
+SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_30.startPoint())
+SketchConstraintAngle_3 = Sketch_1.setAngleBackward(SketchLine_30.result(), SketchLine_10.result(), 34)
+SketchLine_31 = Sketch_1.addLine(0, 2.425, -5.676829966640709, 10.23848613167324)
+SketchLine_31.setName("SketchLine_35")
+SketchLine_31.result().setName("SketchLine_35")
+SketchLine_31.setAuxiliary(True)
+SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_63 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_64 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_65 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_66 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_67 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_68 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_31.endPoint())
+SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_31.result(), SketchLine_10.result(), 36)
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 1.316)
+SketchLine_32 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -4.794548536090929, 9.764655753971969)
+SketchLine_32.setName("SketchLine_38")
+SketchLine_32.result().setName("SketchLine_38")
+SketchLine_32.setAuxiliary(True)
+SketchConstraintCoincidence_69 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_32.startPoint())
+SketchConstraintCoincidence_70 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_32.startPoint())
+SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_32.result())
+SketchConstraintAngle_5 = Sketch_1.setAngleBackward(SketchLine_23.result(), SketchLine_32.result(), 42.1)
+SketchLine_33 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -5.10267883886141, 9.26204592494933)
+SketchLine_33.setName("SketchLine_39")
+SketchLine_33.result().setName("SketchLine_39")
+SketchLine_33.setAuxiliary(True)
+SketchConstraintCoincidence_71 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_72 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_73 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_33.startPoint())
+SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_33.result())
+SketchLine_34 = Sketch_1.addLine(-6.084266646261868, 9.523738867722166, -4.794548536090929, 9.26204592494933)
+SketchLine_34.setName("SketchLine_40")
+SketchLine_34.result().setName("SketchLine_40")
+SketchLine_34.setAuxiliary(True)
+SketchConstraintCoincidence_74 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_75 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_76 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_77 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_78 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_79 = Sketch_1.setCoincident(SketchLine_33.startPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_80 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_10.result())
+SketchConstraintAngle_6 = Sketch_1.setAngleBackward(SketchLine_33.result(), SketchLine_34.result(), 11.47)
+SketchLine_35 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.756768760952487, 10.34851244290823)
+SketchLine_35.setName("SketchLine_36")
+SketchLine_35.result().setName("SketchLine_36")
+SketchLine_35.setAuxiliary(True)
+SketchConstraintCoincidence_81 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_82 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_83 = Sketch_1.setCoincident(SketchLine_25.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_84 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_85 = Sketch_1.setCoincident(SketchLine_35.endPoint(), SketchArc_3.results()[1])
+SketchLine_36 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.476735296592498, 10.54459398560407)
+SketchLine_36.setName("SketchLine_37")
+SketchLine_36.result().setName("SketchLine_37")
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_86 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_87 = Sketch_1.setCoincident(SketchLine_26.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_88 = Sketch_1.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_89 = Sketch_1.setCoincident(SketchLine_36.endPoint(), SketchArc_3.results()[1])
+SketchLine_37 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -5.190029273900022, 10.73078305375603)
+SketchLine_37.setName("SketchLine_41")
+SketchLine_37.result().setName("SketchLine_41")
+SketchLine_37.setAuxiliary(True)
+SketchConstraintCoincidence_90 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_91 = Sketch_1.setCoincident(SketchLine_27.startPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_92 = Sketch_1.setCoincident(SketchLine_29.startPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_93 = Sketch_1.setCoincident(SketchLine_37.endPoint(), SketchArc_3.results()[1])
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_35.result(), SketchLine_31.result())
+SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_36.result(), SketchLine_30.result())
+SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_37.result(), SketchLine_29.result())
+SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_35.result(), 0.136)
+SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_36.result(), 0.106)
+SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_37.result(), 0.088)
+model.do()
+
+sketchTime = timer() - sketchTime
+print "Sketch creation time: {0}".format(sketchTime)
+expectedTime = MOVE_BUILD_RATIO * sketchTime
+averageTime = 0
+nbMoves = 0
+
+#=========================================================================
+# Move point under the Middle point constraint and check execution time.
+# This point is fully constrained, so its coordinates should not be changed.
+#=========================================================================
+aPoint = SketchPoint_1.coordinates()
+X = aPoint.x()
+Y = aPoint.y()
+deltas = [(0.0, 0.1), (0.1, 0.0), (-0.1, 0.1), (1.0, 0.0), (0.0, -1.0), (-0.5, -0.2), (-0.3, 0.3)]
+for deltaX, deltaY in deltas:
+ movementTime = timer()
+ aPoint.setValue(X, Y + 0.1)
+ model.do()
+ movementTime = timer() - movementTime
+ assert movementTime < expectedTime, "Time to move point {0} is greater than expected {1}".format(movementTime, expectedTime)
+ assert math.fabs(aPoint.x() - X) < TOLERANCE and math.fabs(aPoint.y() - Y) < TOLERANCE, "({0}, {1}) != ({2}, {3})".format(aPoint.x(), aPoint.y(), X, Y)
+ averageTime += movementTime
+ nbMoves += 1
+print "Movement average time: {0}".format(averageTime / nbMoves)
+
+#=========================================================================
+# Change value of SketchConstraintAngle_6 and check execution time.
+# Check constrained objects are satisfy this constraint.
+# Check the middle point stays on its place.
+#=========================================================================
+averageTime = 0
+nbMoves = 0
+for ang in range(12, 30):
+ movementTime = timer()
+ SketchConstraintAngle_6.feature().real("AngleValue").setValue(ang)
+ model.do()
+ movementTime = timer() - movementTime
+ assert movementTime < expectedTime, "Time to change angle {0} is greater than expected {1}".format(movementTime, expectedTime)
+ curAngle = angle(SketchLine_33.startPoint(), SketchLine_33.endPoint(), SketchLine_34.endPoint(), SketchLine_34.startPoint())
+ assert math.fabs(curAngle - ang) < TOLERANCE, "angle {0} != {1} expected".format(curAngle, ang)
+ averageTime += movementTime
+ nbMoves += 1
+print "Changing angle average time: {0}".format(averageTime / nbMoves)
+
+model.end()
+
+
+assert(model.checkPythonDump())
--- /dev/null
+"""
+ Test1967.py
+ Test case for issue #1967 "Drag and drop a point with middle point constraint is too slow"
+"""
+
+from salome.shaper import model
+from timeit import default_timer as timer
+import math
+
+# convenient ratio of time moving point to time creating sketch
+MOVE_BUILD_RATIO = 0.1
+# tolerance for comparison of reals
+TOLERANCE = 1.e-7
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "ep_jupe", "0.188")
+
+# time to build sketch
+sketchTime = timer()
+
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-6.376, 9.025, -6.376, -2.25)
+SketchLine_2 = Sketch_1.addLine(-6.376, -2.25, -6.538, -2.4)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-6.538, -2.4, -6.538, -3.45)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-6.538, -3.45, -7.782, -3.45)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-7.782, -3.45, -7.782, -6.45)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(-7.782, -6.45, 0, -6.45)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(0, -6.45, 0, -3.45)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(0, -3.45, -6.188, -3.45)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(-6.188, -3.45, -6.188, 9.025)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_1.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_4.result())
+SketchLine_10 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_10.result())
+SketchLine_11 = Sketch_1.addLine(-6.376, 9.025, -6.538, 9.187)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_11.startPoint())
+SketchLine_12 = Sketch_1.addLine(-6.538, 9.187, -6.538, 10.256)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_1.addLine(-6.538, 10.256, -6.188, 10.256)
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_1.addLine(-6.188, 9.025, -6.084266646261862, 9.523738867722171)
+SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), "ep_jupe")
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_9.result(), 0.35)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_10.result(), 6.188)
+SketchLine_15 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_15.result(), 9.025)
+SketchLine_16 = Sketch_1.addLine(-6.376, 9.025, -6.188, 9.025)
+SketchLine_16.setAuxiliary(True)
+SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_16.endPoint())
+SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_14.startPoint(), SketchLine_16.endPoint())
+SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_16.result())
+SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_15.result(), 2.25)
+SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_15.result(), 2.4)
+SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_15.result(), 3.45)
+SketchLine_17 = Sketch_1.addLine(-6.282, 9.025, -6.282, -4.050005366189865)
+SketchLine_17.setAuxiliary(True)
+SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_17.result())
+SketchLine_18 = Sketch_1.addLine(-5.532, -4.050005366189866, -7.032, -4.050005366189866)
+SketchLine_19 = Sketch_1.addLine(-7.032, -4.050005366189866, -7.032, -5.850005366189865)
+SketchLine_20 = Sketch_1.addLine(-7.032, -5.850005366189865, -5.532, -5.850005366189865)
+SketchLine_21 = Sketch_1.addLine(-5.532, -5.850005366189865, -5.532, -4.050005366189866)
+SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
+SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_19.result())
+SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result())
+SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_21.result())
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_20.result(), 1.5)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_19.result(), 1.8)
+SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.result())
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_18.result(), SketchLine_17.endPoint())
+SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5)
+SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_17.result(), 0.256)
+SketchConstraintDistance_10 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_15.result(), 9.187)
+SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_12.endPoint(), SketchLine_15.result(), 10.256)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_13.result(), 0.35)
+SketchLine_22 = Sketch_1.addLine(-6.188, 10.256, -4.938, 10.97786688777511)
+SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_22.startPoint())
+SketchArc_1 = Sketch_1.addArc(-4.794548536090929, 9.26204592494933, -6.084266646261862, 9.523738867722171, -5.676829966640709, 10.23848613167324, True)
+SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchArc_1.startPoint())
+SketchLine_23 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -4.794548536090929, 9.26204592494933)
+SketchLine_23.setAuxiliary(True)
+SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchArc_1.center())
+SketchArc_2 = Sketch_1.addArc(0, 2.425, -4.938, 10.97786688777511, 0, 12.301, True)
+SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_10.result())
+SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_10.result())
+SketchConstraintDistance_12 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_15.result(), 2.425)
+SketchLine_24 = Sketch_1.addLine(0, 12.301, 0, 12.137)
+SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_24.startPoint())
+SketchArc_3 = Sketch_1.addArc(0, 2.425, -5.877900790328188, 10.25907418263698, 2.067397663006541, 11.99831201324782, True)
+SketchArc_3.setName("SketchArc_4")
+SketchArc_3.result().setName("SketchArc_4")
+SketchArc_3.results()[1].setName("SketchArc_4_2")
+SketchArc_3.setAuxiliary(True)
+SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_3.center())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 9.794)
+SketchPoint_1 = Sketch_1.addPoint(0, 12.219)
+SketchPoint_1.setName("SketchPoint_2")
+SketchPoint_1.result().setName("SketchPoint_2")
+SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_24.result())
+SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.results()[1])
+SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_24.result())
+SketchLine_25 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.417460848824602, 10.45671600291324)
+SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_25.startPoint())
+SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_25.startPoint())
+SketchLine_26 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.143396378647499, 10.65615482129426)
+SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
+SketchLine_27 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -4.856, 10.83583872155447)
+SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
+SketchArc_4 = Sketch_1.addArc(0, 2.425, -4.856, 10.83583872155447, 0, 12.137, True)
+SketchArc_4.setName("SketchArc_5")
+SketchArc_4.result().setName("SketchArc_5")
+SketchArc_4.results()[1].setName("SketchArc_5_2")
+SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
+SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_4.center())
+SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchArc_4.endPoint())
+SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_24.result(), "0.082*2")
+SketchLine_28 = Sketch_1.addLine(-4.938, 10.97786688777511, 0, 2.425)
+SketchLine_28.setAuxiliary(True)
+SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_28.startPoint())
+SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_28.endPoint())
+SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_27.endPoint())
+SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_28.result(), SketchLine_10.result(), 30)
+SketchLine_29 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, 0, 2.425)
+SketchLine_29.setAuxiliary(True)
+SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.endPoint())
+SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_29.startPoint())
+SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_29.result(), SketchLine_10.result(), 32)
+SketchLine_30 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, 0, 2.425)
+SketchLine_30.setAuxiliary(True)
+SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.endPoint())
+SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_30.startPoint())
+SketchConstraintAngle_3 = Sketch_1.setAngleBackward(SketchLine_30.result(), SketchLine_10.result(), 34)
+SketchLine_31 = Sketch_1.addLine(0, 2.425, -5.676829966640709, 10.23848613167324)
+SketchLine_31.setName("SketchLine_35")
+SketchLine_31.result().setName("SketchLine_35")
+SketchLine_31.setAuxiliary(True)
+SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_63 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_64 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_65 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
+SketchConstraintCoincidence_66 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_31.endPoint())
+SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_31.result(), SketchLine_10.result(), 36)
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 1.316)
+SketchLine_32 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -4.794548536090929, 9.764655753971969)
+SketchLine_32.setName("SketchLine_38")
+SketchLine_32.result().setName("SketchLine_38")
+SketchLine_32.setAuxiliary(True)
+SketchConstraintCoincidence_67 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_32.startPoint())
+SketchConstraintCoincidence_68 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_32.startPoint())
+SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_32.result())
+SketchConstraintAngle_5 = Sketch_1.setAngleBackward(SketchLine_23.result(), SketchLine_32.result(), 42.1)
+SketchLine_33 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -5.10267883886141, 9.26204592494933)
+SketchLine_33.setName("SketchLine_39")
+SketchLine_33.result().setName("SketchLine_39")
+SketchLine_33.setAuxiliary(True)
+SketchConstraintCoincidence_69 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_70 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_33.startPoint())
+SketchConstraintCoincidence_71 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_33.startPoint())
+SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_33.result())
+SketchLine_34 = Sketch_1.addLine(-6.084266646261862, 9.523738867722171, -4.794548536090929, 9.26204592494933)
+SketchLine_34.setName("SketchLine_40")
+SketchLine_34.result().setName("SketchLine_40")
+SketchLine_34.setAuxiliary(True)
+SketchConstraintCoincidence_72 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_73 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_34.startPoint())
+SketchConstraintCoincidence_74 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_75 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_76 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_77 = Sketch_1.setCoincident(SketchLine_33.startPoint(), SketchLine_34.endPoint())
+SketchConstraintCoincidence_78 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_10.result())
+SketchConstraintAngle_6 = Sketch_1.setAngleBackward(SketchLine_33.result(), SketchLine_34.result(), 11.47)
+SketchLine_35 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.756768760952487, 10.34851244290823)
+SketchLine_35.setName("SketchLine_36")
+SketchLine_35.result().setName("SketchLine_36")
+SketchLine_35.setAuxiliary(True)
+SketchConstraintCoincidence_79 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_80 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_81 = Sketch_1.setCoincident(SketchLine_25.startPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_82 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_35.startPoint())
+SketchConstraintCoincidence_83 = Sketch_1.setCoincident(SketchLine_35.endPoint(), SketchArc_3.results()[1])
+SketchLine_36 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.476735296592498, 10.54459398560407)
+SketchLine_36.setName("SketchLine_37")
+SketchLine_36.result().setName("SketchLine_37")
+SketchLine_36.setAuxiliary(True)
+SketchConstraintCoincidence_84 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_85 = Sketch_1.setCoincident(SketchLine_26.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_86 = Sketch_1.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
+SketchConstraintCoincidence_87 = Sketch_1.setCoincident(SketchLine_36.endPoint(), SketchArc_3.results()[1])
+SketchLine_37 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -5.190029273900022, 10.73078305375603)
+SketchLine_37.setName("SketchLine_41")
+SketchLine_37.result().setName("SketchLine_41")
+SketchLine_37.setAuxiliary(True)
+SketchConstraintCoincidence_88 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_89 = Sketch_1.setCoincident(SketchLine_27.startPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_90 = Sketch_1.setCoincident(SketchLine_29.startPoint(), SketchLine_37.startPoint())
+SketchConstraintCoincidence_91 = Sketch_1.setCoincident(SketchLine_37.endPoint(), SketchArc_3.results()[1])
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_35.result(), SketchLine_31.result())
+SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_36.result(), SketchLine_30.result())
+SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_37.result(), SketchLine_29.result())
+SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_35.result(), 0.136)
+SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_36.result(), 0.106)
+SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_37.result(), 0.088)
+SketchConstraintCoincidence_92 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_16.result())
+SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_16.result())
+model.do()
+
+sketchTime = timer() - sketchTime
+print "Sketch creation time: {0}".format(sketchTime)
+expectedTime = MOVE_BUILD_RATIO * sketchTime
+averageTime = 0
+nbMoves = 0
+
+#=========================================================================
+# Move point under the Middle point constraint and check execution time.
+# This point is fully constrained, so its coordinates should not be changed.
+#=========================================================================
+aPoint = SketchLine_17.startPoint()
+X = aPoint.x()
+Y = aPoint.y()
+deltas = [(0.0, 0.1), (0.1, 0.0), (-0.1, 0.1), (1.0, 0.0), (0.0, -1.0), (-0.5, -0.2), (-0.3, 0.3)]
+for deltaX, deltaY in deltas:
+ movementTime = timer()
+ aPoint.setValue(X, Y + 0.1)
+ model.do()
+ movementTime = timer() - movementTime
+ assert movementTime < expectedTime, "Time to move point {0} is greater than expected {1}".format(movementTime, expectedTime)
+ assert math.fabs(aPoint.x() - X) < TOLERANCE and math.fabs(aPoint.y() - Y) < TOLERANCE, "({0}, {1}) != ({2}, {3})".format(aPoint.x(), aPoint.y(), X, Y)
+ averageTime += movementTime
+ nbMoves += 1
+
+print "Movement average time: {0}".format(averageTime / nbMoves)
+
+model.end()
+
+
+assert(model.checkPythonDump())
