--- /dev/null
+# -*- coding: utf-8 -*-
+
+## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from GeomAPI import *
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+model.addParameter(Part_1_doc, "R", "58")
+model.addParameter(Part_1_doc, "cote_cube", "R/2")
+model.addParameter(Part_1_doc, "theta", "54")
+model.addParameter(Part_1_doc, "phi", "36")
+model.addParameter(Part_1_doc, "pi", "3.141592653589793")
+model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)")
+model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)")
+model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)")
+model.addParameter(Part_1_doc, "haut_ext_tuyau", "5")
+model.addParameter(Part_1_doc, "haut_int_tuyau", "14")
+Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10")
+
+Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
+SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint())
+SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R")
+Revolution_1.setNestedSketch(Sketch_1)
+
+Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2"))
+SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0)
+SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29)
+SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29)
+SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
+SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result())
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube")
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/To_Face_1"), False)
+SketchLine_8 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result())
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/From_Face_1"), False)
+SketchLine_9 = SketchProjection_4.createdFeature()
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result())
+Extrusion_1.setNestedSketch(Sketch_2)
+
+Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
+
+Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z")
+Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Fill_1_1_2/Modified_Face_3&Fill_1_1_2/Modified_Face_2&Fill_1_1_2/Modified_Face_1"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True)
+Plane_5.result().setName("Plane_2 arrivee tuyau")
+Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), 45)
+Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), 45)
+Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"), "90+45")
+
+Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")])
+Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")])
+Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")])
+Fill_4.result().setColor(102, 51, 51)
+Fill_4.result().subResult(0).setColor(153, 153, 76)
+Fill_4.result().subResult(1).setColor(0, 204, 204)
+Fill_4.result().subResult(2).setColor(51, 51, 102)
+Fill_4.result().subResult(3).setColor(102, 204, 102)
+Fill_4.result().subResult(4).setColor(204, 204, 0)
+
+Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")])
+
+Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau"))
+
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau"))
+SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False)
+SketchPoint_2 = SketchProjection_5.createdFeature()
+SketchCircle_1 = Sketch_3.addCircle(0, 0, 10)
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau")
+SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5)
+SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5)
+SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5)
+SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5)
+SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result())
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result())
+SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result())
+SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475)
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1])
+SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476)
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1])
+SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result())
+SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5)
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint())
+SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476)
+SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1])
+SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result())
+SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result())
+SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result())
+SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau")
+model.do()
+
+Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_11f-SketchLine_14r-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_10f-SketchLine_14f-SketchLine_17r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_13f-SketchLine_15r-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_12f-SketchLine_15f-SketchLine_16f")]
+Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), "haut_int_tuyau", 0)
+
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_3"))
+SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), False)
+SketchPoint_3 = SketchProjection_6.createdFeature()
+SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), False)
+SketchPoint_4 = SketchProjection_7.createdFeature()
+SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True)
+SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1])
+SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472)
+SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint())
+SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), False)
+SketchPoint_5 = SketchProjection_8.createdFeature()
+SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates())
+model.do()
+
+Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_18"), 0, 180)
+
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
+Cut_1.result().setName("demi-sphere")
+
+Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/From_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_10&Extrusion_2_1/To_Face_4"))
+Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_12&Extrusion_2_1/Generated_Face_11&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/From_Face_1"))
+Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/From_Face_3"))
+Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/From_Face_4"))
+
+Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()])
+
+Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape4"), model.selection("EDGE", "Recover_1_1/Shape4&Recover_1_1/Shape6"), "90+45")
+Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape1"), model.selection("EDGE", "Recover_1_1/Shape1&Recover_1_1/Shape6"), "90+45")
+Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape2"), model.selection("EDGE", "Recover_1_1/Shape2&Recover_1_1/Shape6"), "90+45")
+Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape6"), model.selection("EDGE", "Recover_1_1/Shape3&Recover_1_1/Shape6"), 45)
+
+Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
+Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2)
+
+Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")]
+Union_2 = model.addUnion(Part_1_doc, Union_2_objects)
+Union_3_objects = [model.selection("SOLID", "Fill_5_1_8/Fill_5_1_8"), model.selection("SOLID", "Fill_5_1_4/Fill_5_1_4"), model.selection("SOLID", "Fill_5_1_9/Fill_5_1_9"), model.selection("SOLID", "Fill_5_1_11/Fill_5_1_11")]
+Union_3 = model.addUnion(Part_1_doc, Union_3_objects)
+Union_4_objects = [model.selection("SOLID", "Fill_5_1_6/Fill_5_1_6"), model.selection("SOLID", "Fill_5_1_10/Fill_5_1_10"), model.selection("SOLID", "Fill_5_1_13/Fill_5_1_13")]
+Union_4 = model.addUnion(Part_1_doc, Union_4_objects)
+Union_5_objects = [model.selection("SOLID", "Fill_5_1_2/Fill_5_1_2"), model.selection("SOLID", "Fill_5_1_1/Fill_5_1_1"), model.selection("SOLID", "Fill_5_1_3/Fill_5_1_3")]
+Union_5 = model.addUnion(Part_1_doc, Union_5_objects)
+Union_6_objects = [model.selection("SOLID", "Fill_5_1_5/Fill_5_1_5"), model.selection("SOLID", "Fill_5_1_7/Fill_5_1_7"), model.selection("SOLID", "Fill_5_1_12/Fill_5_1_12")]
+Union_6 = model.addUnion(Part_1_doc, Union_6_objects)
+Union_6.result().setColor(0, 0, 204)
+Union_6.result().subResult(0).setColor(204, 102, 102)
+Union_6.result().subResult(1).setColor(127, 254, 127)
+Union_6.result().subResult(2).setColor(102, 51, 102)
+Union_6.result().subResult(3).setColor(76, 76, 153)
+Union_6.result().subResult(4).setColor(0, 0, 254)
+
+Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
+Partition_1.result().setColor(102, 0, 0)
+Partition_1.result().subResult(0).setColor(255, 255, 0)
+Partition_1.result().subResult(1).setColor(0, 254, 0)
+Partition_1.result().subResult(2).setColor(0, 255, 255)
+Partition_1.result().subResult(3).setColor(255, 85, 0)
+Partition_1.result().subResult(4).setColor(153, 0, 0)
+Partition_1.result().subResult(5).setColor(254, 0, 254)
+Partition_1.result().subResult(6).setColor(127, 127, 254)
+Partition_1.result().subResult(7).setColor(102, 204, 102)
+Partition_1.result().subResult(8).setColor(127, 254, 127)
+Partition_1.result().subResult(9).setColor(153, 153, 76)
+Partition_1.result().subResult(10).setColor(204, 102, 102)
+Partition_1.result().subResult(11).setColor(127, 254, 254)
+Partition_1.result().subResult(12).setColor(255, 255, 0)
+Partition_1.result().subResult(13).setColor(102, 51, 102)
+Partition_1.result().subResult(14).setColor(102, 204, 204)
+Partition_1.result().subResult(15).setColor(254, 127, 254)
+Partition_1.result().subResult(16).setColor(153, 153, 0)
+Partition_1.result().subResult(17).setColor(153, 153, 0)
+Partition_1.result().subResult(18).setColor(204, 0, 204)
+
+Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1)
+Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6)
+model.do()
+
+# check the result
+model.testNbResults(Partition_1, 1)
+model.testNbSubResults(Partition_1, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628])
+model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979])
+
+# change parameter and check validity of the result
+Param_Diam.setValue(8)
+model.do()
+
+model.testNbResults(Partition_1, 1)
+model.testNbSubResults(Partition_1, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488])
+model.testResultsVolumes(Partition_1, [103221.354557478349306620657444])
+
+model.end()
+
+#assert(model.checkPythonDump())
+++ /dev/null
-# -*- coding: utf-8 -*-
-
-## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
-
-from GeomAPI import *
-from SketchAPI import *
-
-from salome.shaper import model
-
-model.begin()
-partSet = model.moduleDocument()
-Part_1 = model.addPart(partSet)
-Part_1_doc = Part_1.document()
-
-model.addParameter(Part_1_doc, "R", "58")
-model.addParameter(Part_1_doc, "cote_cube", "R/2")
-model.addParameter(Part_1_doc, "theta", "54")
-model.addParameter(Part_1_doc, "phi", "36")
-model.addParameter(Part_1_doc, "pi", "3.141592653589793")
-model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)")
-model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)")
-model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)")
-model.addParameter(Part_1_doc, "haut_ext_tuyau", "5")
-model.addParameter(Part_1_doc, "haut_int_tuyau", "14")
-Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10")
-
-Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0)
-Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
-SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
-SketchLine_1 = SketchProjection_2.createdFeature()
-SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True)
-SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
-SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
-SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0)
-SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
-SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint())
-SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0)
-SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
-SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
-SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
-SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R")
-Revolution_1.setNestedSketch(Sketch_1)
-
-Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2"))
-SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0)
-SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29)
-SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29)
-SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0)
-SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
-SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
-SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
-SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
-SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
-SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result())
-SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
-SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
-SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube")
-SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result())
-SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/To_Face_1"), False)
-SketchLine_8 = SketchProjection_3.createdFeature()
-SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result())
-SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/From_Face_1"), False)
-SketchLine_9 = SketchProjection_4.createdFeature()
-SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result())
-Extrusion_1.setNestedSketch(Sketch_2)
-
-Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
-
-Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z")
-Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Fill_1_1_2/Modified_Face_3&Fill_1_1_2/Modified_Face_2&Fill_1_1_2/Modified_Face_1"))
-Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True)
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True)
-Plane_5.result().setName("Plane_2 arrivee tuyau")
-Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), 45)
-Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), 45)
-Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"), "90+45")
-
-Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")])
-Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")])
-Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")])
-Fill_4.result().setColor(102, 51, 51)
-Fill_4.result().subResult(0).setColor(153, 153, 76)
-Fill_4.result().subResult(1).setColor(0, 204, 204)
-Fill_4.result().subResult(2).setColor(51, 51, 102)
-Fill_4.result().subResult(3).setColor(102, 204, 102)
-Fill_4.result().subResult(4).setColor(204, 204, 0)
-
-Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")])
-
-Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau"))
-
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau"))
-SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False)
-SketchPoint_2 = SketchProjection_5.createdFeature()
-SketchCircle_1 = Sketch_3.addCircle(0, 0, 10)
-SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
-SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau")
-SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5)
-SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5)
-SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5)
-SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5)
-SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
-SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
-SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
-SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
-SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result())
-SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
-SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result())
-SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result())
-SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result())
-SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475)
-SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint())
-SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1])
-SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476)
-SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
-SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1])
-SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result())
-SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5)
-SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1])
-SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint())
-SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476)
-SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint())
-SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1])
-SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result())
-SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result())
-SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result())
-SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau")
-model.do()
-
-Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_11f-SketchLine_14r-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_10f-SketchLine_14f-SketchLine_17r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_13f-SketchLine_15r-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_12f-SketchLine_15f-SketchLine_16f")]
-Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0)
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), "haut_int_tuyau", 0)
-
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_3"))
-SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), False)
-SketchPoint_3 = SketchProjection_6.createdFeature()
-SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), False)
-SketchPoint_4 = SketchProjection_7.createdFeature()
-SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True)
-SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint())
-SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1])
-SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472)
-SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint())
-SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint())
-SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), False)
-SketchPoint_5 = SketchProjection_8.createdFeature()
-SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates())
-model.do()
-
-Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_18"), 0, 180)
-
-Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
-Cut_1.result().setName("demi-sphere")
-
-Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/From_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_10&Extrusion_2_1/To_Face_4"))
-Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_12&Extrusion_2_1/Generated_Face_11&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/From_Face_1"))
-Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/From_Face_3"))
-Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/From_Face_4"))
-
-Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()])
-
-Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape4"), model.selection("EDGE", "Recover_1_1/Shape4&Recover_1_1/Shape6"), "90+45")
-Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape1"), model.selection("EDGE", "Recover_1_1/Shape1&Recover_1_1/Shape6"), "90+45")
-Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape2"), model.selection("EDGE", "Recover_1_1/Shape2&Recover_1_1/Shape6"), "90+45")
-Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape6"), model.selection("EDGE", "Recover_1_1/Shape3&Recover_1_1/Shape6"), 45)
-
-Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
-Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2)
-
-Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")]
-Union_2 = model.addUnion(Part_1_doc, Union_2_objects)
-Union_3_objects = [model.selection("SOLID", "Fill_5_1_8/Fill_5_1_8"), model.selection("SOLID", "Fill_5_1_4/Fill_5_1_4"), model.selection("SOLID", "Fill_5_1_9/Fill_5_1_9"), model.selection("SOLID", "Fill_5_1_11/Fill_5_1_11")]
-Union_3 = model.addUnion(Part_1_doc, Union_3_objects)
-Union_4_objects = [model.selection("SOLID", "Fill_5_1_6/Fill_5_1_6"), model.selection("SOLID", "Fill_5_1_10/Fill_5_1_10"), model.selection("SOLID", "Fill_5_1_13/Fill_5_1_13")]
-Union_4 = model.addUnion(Part_1_doc, Union_4_objects)
-Union_5_objects = [model.selection("SOLID", "Fill_5_1_2/Fill_5_1_2"), model.selection("SOLID", "Fill_5_1_1/Fill_5_1_1"), model.selection("SOLID", "Fill_5_1_3/Fill_5_1_3")]
-Union_5 = model.addUnion(Part_1_doc, Union_5_objects)
-Union_6_objects = [model.selection("SOLID", "Fill_5_1_5/Fill_5_1_5"), model.selection("SOLID", "Fill_5_1_7/Fill_5_1_7"), model.selection("SOLID", "Fill_5_1_12/Fill_5_1_12")]
-Union_6 = model.addUnion(Part_1_doc, Union_6_objects)
-Union_6.result().setColor(0, 0, 204)
-Union_6.result().subResult(0).setColor(204, 102, 102)
-Union_6.result().subResult(1).setColor(127, 254, 127)
-Union_6.result().subResult(2).setColor(102, 51, 102)
-Union_6.result().subResult(3).setColor(76, 76, 153)
-Union_6.result().subResult(4).setColor(0, 0, 254)
-
-Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")]
-Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
-Partition_1.result().setColor(102, 0, 0)
-Partition_1.result().subResult(0).setColor(255, 255, 0)
-Partition_1.result().subResult(1).setColor(0, 254, 0)
-Partition_1.result().subResult(2).setColor(0, 255, 255)
-Partition_1.result().subResult(3).setColor(255, 85, 0)
-Partition_1.result().subResult(4).setColor(153, 0, 0)
-Partition_1.result().subResult(5).setColor(254, 0, 254)
-Partition_1.result().subResult(6).setColor(127, 127, 254)
-Partition_1.result().subResult(7).setColor(102, 204, 102)
-Partition_1.result().subResult(8).setColor(127, 254, 127)
-Partition_1.result().subResult(9).setColor(153, 153, 76)
-Partition_1.result().subResult(10).setColor(204, 102, 102)
-Partition_1.result().subResult(11).setColor(127, 254, 254)
-Partition_1.result().subResult(12).setColor(255, 255, 0)
-Partition_1.result().subResult(13).setColor(102, 51, 102)
-Partition_1.result().subResult(14).setColor(102, 204, 204)
-Partition_1.result().subResult(15).setColor(254, 127, 254)
-Partition_1.result().subResult(16).setColor(153, 153, 0)
-Partition_1.result().subResult(17).setColor(153, 153, 0)
-Partition_1.result().subResult(18).setColor(204, 0, 204)
-
-Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1)
-Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6)
-model.do()
-
-# check the result
-model.testNbResults(Partition_1, 1)
-model.testNbSubResults(Partition_1, [19])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628])
-model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979])
-
-# change parameter and check validity of the result
-Param_Diam.setValue(8)
-model.do()
-
-model.testNbResults(Partition_1, 1)
-model.testNbSubResults(Partition_1, [19])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744])
-model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488])
-model.testResultsVolumes(Partition_1, [103221.354557478349306620657444])
-
-model.end()
-
-#assert(model.checkPythonDump())
