# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
#
#
-# File : geompy.py
+# File : batchmode_geompy.py
# Author : Paul RASCLE, EDF
# Module : GEOM
# $Header$
-from batchmode_salome import *
-import GEOM
-g=None
-step = 0
-sleeping_time = 0.01
-sleeping_time_max = 1.0
-while 1:
- g = lcc.FindOrLoadComponent("FactoryServer", "GEOM")
- if g is not None: break
- step = step + 1
- if step > 100: break
- time.sleep(sleeping_time)
- sleeping_time = max(sleeping_time_max, 2*sleeping_time)
- pass
-geom = g._narrow( GEOM.GEOM_Gen )
-
-myBuilder = None
-myStudyId = 0
-father = None
-
-BasicOp = None
-CurvesOp = None
-PrimOp = None
-ShapesOp = None
-HealOp = None
-InsertOp = None
-BoolOp = None
-TrsfOp = None
-LocalOp = None
-MeasuOp = None
-BlocksOp = None
-GroupOp = None
-
-def init_geom(theStudy):
-
- global myStudy, myBuilder, myStudyId, BasicOp, CurvesOp, PrimOp, ShapesOp, HealOp
- global InsertOp, BoolOp, TrsfOp, LocalOp, MeasuOp, BlocksOp, GroupOp, father
-
- myStudy = theStudy
- myStudyId = myStudy._get_StudyId()
- myBuilder = myStudy.NewBuilder()
- father = myStudy.FindComponent("GEOM")
- if father is None:
- father = myBuilder.NewComponent("GEOM")
- A1 = myBuilder.FindOrCreateAttribute(father, "AttributeName")
- FName = A1._narrow(SALOMEDS.AttributeName)
- FName.SetValue("Geometry")
- A2 = myBuilder.FindOrCreateAttribute(father, "AttributePixMap")
- aPixmap = A2._narrow(SALOMEDS.AttributePixMap)
- aPixmap.SetPixMap("ICON_OBJBROWSER_Geometry")
- myBuilder.DefineComponentInstance(father,geom)
- pass
-
- # -----------------------------------------------------------------------------
- # Assign Operations Interfaces
- # -----------------------------------------------------------------------------
-
- BasicOp = geom.GetIBasicOperations (myStudyId)
- CurvesOp = geom.GetICurvesOperations (myStudyId)
- PrimOp = geom.GetI3DPrimOperations (myStudyId)
- ShapesOp = geom.GetIShapesOperations (myStudyId)
- HealOp = geom.GetIHealingOperations (myStudyId)
- InsertOp = geom.GetIInsertOperations (myStudyId)
- BoolOp = geom.GetIBooleanOperations (myStudyId)
- TrsfOp = geom.GetITransformOperations(myStudyId)
- LocalOp = geom.GetILocalOperations (myStudyId)
- MeasuOp = geom.GetIMeasureOperations (myStudyId)
- BlocksOp = geom.GetIBlocksOperations (myStudyId)
- GroupOp = geom.GetIGroupOperations (myStudyId)
- pass
-
-init_geom(myStudy)
-
-# * Get name for sub-shape aSubObj of shape aMainObj
-#
-def SubShapeName(aSubObj, aMainObj):
- name = "SubShape"
- print name
- return name
-
-# * Publish in study aShape with name aName
-#
-def addToStudy(aShape, aName):
- try:
- aSObject = geom.AddInStudy(myStudy, aShape, aName, None)
- except:
- print "addToStudy() failed"
- return ""
- return aShape.GetStudyEntry()
-
-# * Publish in study aShape with name aName as sub-object of previously published aFather
-#
-def addToStudyInFather(aFather, aShape, aName):
- try:
- aSObject = geom.AddInStudy(myStudy, aShape, aName, aFather)
- except:
- print "addToStudyInFather() failed"
- return ""
- return aShape.GetStudyEntry()
-
-# -----------------------------------------------------------------------------
-# enumeration ShapeType as a dictionary
-# -----------------------------------------------------------------------------
-
-ShapeType = {"COMPOUND":0, "COMPSOLID":1, "SOLID":2, "SHELL":3, "FACE":4, "WIRE":5, "EDGE":6, "VERTEX":7, "SHAPE":8}
-
-# -----------------------------------------------------------------------------
-# Basic primitives
-# -----------------------------------------------------------------------------
-
-def MakeVertex(theX, theY, theZ):
- anObj = BasicOp.MakePointXYZ(theX, theY, theZ)
- if BasicOp.IsDone() == 0:
- print "MakePointXYZ : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeVertexWithRef(vertex,x,y,z):
- anObj = BasicOp.MakePointWithReference(vertex,x,y,z)
- if BasicOp.IsDone() == 0:
- print "MakePointWithReference : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeVertexOnCurve(curve,par):
- anObj = BasicOp.MakePointOnCurve(curve,par)
- if BasicOp.IsDone() == 0:
- print "MakePointOnCurve : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeVertexOnLinesIntersection(line1,line2):
- anObj = BasicOp.MakePointOnLinesIntersection(line1,line2)
- if BasicOp.IsDone() == 0:
- print "MakePointOnLinesIntersection : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeVectorDXDYDZ(dx,dy,dz):
- anObj = BasicOp.MakeVectorDXDYDZ(dx,dy,dz)
- if BasicOp.IsDone() == 0:
- print "MakeVectorDXDYDZ : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeVector(p1,p2):
- anObj = BasicOp.MakeVectorTwoPnt(p1, p2)
- if BasicOp.IsDone() == 0:
- print "MakeVectorTwoPnt : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeLine(p1, d1):
- anObj = BasicOp.MakeLine(p1,d1)
- if BasicOp.IsDone() == 0:
- print "MakeLine : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeLineTwoPnt(p1, p2):
- anObj = BasicOp.MakeLineTwoPnt(p1,p2)
- if BasicOp.IsDone() == 0:
- print "MakeLineTwoPnt : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeLineTwoFaces(f1, f2):
- anObj = BasicOp.MakeLineTwoFaces(f1,f2)
- if BasicOp.IsDone() == 0:
- print "MakeLineTwoFaces : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakePlane(p1,v1,trimsize):
- anObj = BasicOp.MakePlanePntVec(p1,v1,trimsize)
- if BasicOp.IsDone() == 0:
- print "MakePlanePntVec : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakePlaneThreePnt(p1,p2,p3,trimsize):
- anObj = BasicOp.MakePlaneThreePnt(p1,p2,p3,trimsize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneThreePnt : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakePlaneFace(face,trimsize):
- anObj = BasicOp.MakePlaneFace(face,trimsize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneFace : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ):
- anObj = BasicOp.MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ)
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
- return anObj
-
-def MakeMarkerPntTwoVec(theOrigin, theXVec, theYVec):
- """
- * Create a local coordinate system.
- * \param theOrigin Point of coordinate system origin.
- * \param theXVec Vector of X direction
- * \param theYVec Vector of Y direction
- * \return New GEOM_Object, containing the created coordinate system.
- """
- O = PointCoordinates( theOrigin )
- OXOY = []
- for vec in [ theXVec, theYVec ]:
- v1, v2 = SubShapeAll( vec, ShapeType["VERTEX"] )
- p1 = PointCoordinates( v1 )
- p2 = PointCoordinates( v2 )
- for i in range( 0, 3 ):
- OXOY.append( p2[i] - p1[i] )
- #
- anObj = BasicOp.MakeMarker( O[0], O[1], O[2],
- OXOY[0], OXOY[1], OXOY[2],
- OXOY[3], OXOY[4], OXOY[5], )
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Curves
-# -----------------------------------------------------------------------------
-
-def MakeArc(p1,p2,p3):
- anObj = CurvesOp.MakeArc(p1,p2,p3)
- if CurvesOp.IsDone() == 0:
- print "MakeArc : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeCircle(p1,v1,radius):
- anObj = CurvesOp.MakeCirclePntVecR(p1,v1,radius)
- if CurvesOp.IsDone() == 0:
- print "MakeCirclePntVecR : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeCircleThreePnt(p1,p2,p3):
- anObj = CurvesOp.MakeCircleThreePnt(p1,p2,p3)
- if CurvesOp.IsDone() == 0:
- print "MakeCircleThreePnt : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeCircleCenter2Pnt(p1,p2,p3):
- anObj = CurvesOp.MakeCircleCenter2Pnt(p1,p2,p3)
- if CurvesOp.IsDone() == 0:
- print "MakeCircleCenter2Pnt : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeEllipse(p1,v1,radiusMaj,radiusMin):
- anObj = CurvesOp.MakeEllipse(p1,v1,radiusMaj, radiusMin)
- if CurvesOp.IsDone() == 0:
- print "MakeEllipse : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakePolyline(ListShape):
- anObj = CurvesOp.MakePolyline(ListShape)
- if CurvesOp.IsDone() == 0:
- print "MakePolyline : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeBezier(ListShape):
- anObj = CurvesOp.MakeSplineBezier(ListShape)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineBezier : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeInterpol(ListShape):
- anObj = CurvesOp.MakeSplineInterpolation(ListShape)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineInterpolation : ", CurvesOp.GetErrorCode()
- return anObj
-
-# <WPL>: Nine double values, defining origin,
-# OZ and OX directions of the working plane.
-def MakeSketcher(Cmd, WPL = [0,0,0, 0,0,1, 1,0,0]):
- anObj = CurvesOp.MakeSketcher(Cmd, WPL)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
- return anObj
-
-def MakeSketcherOnPlane(theCommand, theWorkingPlane):
- """
- * Create a sketcher (wire or face), following the textual description,
- * passed through \a theCommand argument. \n
- * For format of the description string see the previous method.\n
- * \param theCommand String, defining the sketcher in local
- * coordinates of the working plane.
- * \param theWorkingPlane Planar Face of the working plane.
- * \return New GEOM_Object, containing the created wire.
- """
- anObj = CurvesOp.MakeSketcherOnPlane(theCommand, theWorkingPlane)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create 3D Primitives
-# -----------------------------------------------------------------------------
-
-def MakeBox(x1,y1,z1,x2,y2,z2):
- pnt1 = MakeVertex(x1,y1,z1)
- pnt2 = MakeVertex(x2,y2,z2)
- return MakeBoxTwoPnt(pnt1,pnt2)
-
-def MakeBoxDXDYDZ(dx,dy,dz):
- anObj = PrimOp.MakeBoxDXDYDZ(dx,dy,dz)
- if PrimOp.IsDone() == 0:
- print "MakeBoxDXDYDZ : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeBoxTwoPnt(point1, point2):
- anObj = PrimOp.MakeBoxTwoPnt(point1, point2)
- if PrimOp.IsDone() == 0:
- print "MakeBoxTwoPnt : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeCylinder(p1,v1,radius,height):
- anObj = PrimOp.MakeCylinderPntVecRH(p1,v1,radius,height)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderPntVecRH : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeCylinderRH(radius,height):
- anObj = PrimOp.MakeCylinderRH(radius,height)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderRH : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeSpherePntR(point,radius):
- anObj = PrimOp.MakeSpherePntR(point,radius)
- if PrimOp.IsDone() == 0:
- print "MakeSpherePntR : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeSphere(x,y,z,radius):
- point = MakeVertex(x,y,z)
- anObj = MakeSpherePntR(point,radius)
- return anObj
-
-def MakeSphereR(radius):
- anObj = PrimOp.MakeSphereR(radius)
- if PrimOp.IsDone() == 0:
- print "MakeSphereR : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeCone(p1,v1,radius1,radius2,height):
- anObj = PrimOp.MakeConePntVecR1R2H(p1,v1,radius1,radius2,height)
- if PrimOp.IsDone() == 0:
- print "MakeConePntVecR1R2H : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeConeR1R2H(radius1,radius2,height):
- anObj = PrimOp.MakeConeR1R2H(radius1,radius2,height)
- if PrimOp.IsDone() == 0:
- print "MakeConeR1R2H : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeTorus(p1,v1,major_radius,minor_radius):
- anObj = PrimOp.MakeTorusPntVecRR(p1,v1,major_radius,minor_radius)
- if PrimOp.IsDone() == 0:
- print "MakeTorusPntVecRR : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeTorusRR(major_radius,minor_radius):
- anObj = PrimOp.MakeTorusRR(major_radius,minor_radius)
- if PrimOp.IsDone() == 0:
- print "MakeTorusRR : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakePrism(baseShape,point1,point2):
- anObj = PrimOp.MakePrismTwoPnt(baseShape,point1,point2)
- if PrimOp.IsDone() == 0:
- print "MakePrismTwoPnt : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakePrism2Ways(baseShape,point1,point2):
- anObj = PrimOp.MakePrismTwoPnt2Ways(baseShape,point1,point2)
- if PrimOp.IsDone() == 0:
- print "MakePrismTwoPnt2Ways : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakePrismVecH(baseShape,vector,height):
- anObj = PrimOp.MakePrismVecH(baseShape,vector,height)
- if PrimOp.IsDone() == 0:
- print "MakePrismVecH : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakePrismVecH2Ways(baseShape,vector,height):
- anObj = PrimOp.MakePrismVecH2Ways(baseShape,vector,height)
- if PrimOp.IsDone() == 0:
- print "MakePrismVecH2Ways : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakePipe(baseShape,pathShape):
- anObj = PrimOp.MakePipe(baseShape,pathShape)
- if PrimOp.IsDone() == 0:
- print "MakePipe : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeRevolution(aShape,axis,angle):
- anObj = PrimOp.MakeRevolutionAxisAngle(aShape,axis,angle)
- if PrimOp.IsDone() == 0:
- print "MakeRevolutionAxisAngle : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeRevolution2Ways(aShape,axis,angle):
- anObj = PrimOp.MakeRevolutionAxisAngle2Ways(aShape,axis,angle)
- if PrimOp.IsDone() == 0:
- print "MakeRevolutionAxisAngle2Ways : ", PrimOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create base shapes
-# -----------------------------------------------------------------------------
-
-def MakeEdge(p1,p2):
- anObj = ShapesOp.MakeEdge(p1,p2)
- if ShapesOp.IsDone() == 0:
- print "MakeEdge : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeWire(ListShape):
- anObj = ShapesOp.MakeWire(ListShape)
- if ShapesOp.IsDone() == 0:
- print "MakeWire : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeFace(aShapeWire,WantPlanarFace):
- anObj = ShapesOp.MakeFace(aShapeWire,WantPlanarFace)
- if ShapesOp.IsDone() == 0:
- print "MakeFace : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeFaceWires(ListWires,WantPlanarFace):
- anObj = ShapesOp.MakeFaceWires(ListWires,WantPlanarFace)
- if ShapesOp.IsDone() == 0:
- print "MakeFaceWires : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeFaces(ListWires,WantPlanarFace):
- anObj = MakeFaceWires(ListWires,WantPlanarFace)
- return anObj
-
-def MakeShell(ListOfShapes):
- anObj = ShapesOp.MakeShell(ListOfShapes)
- if ShapesOp.IsDone() == 0:
- print "MakeShell : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeSolid(ListOfShells):
- anObj = ShapesOp.MakeSolidShells(ListOfShells)
- if ShapesOp.IsDone() == 0:
- print "MakeSolid : ", ShapesOp.GetErrorCode()
- return anObj
-
-def MakeCompound(ListShape):
- anObj = ShapesOp.MakeCompound(ListShape)
- if ShapesOp.IsDone() == 0:
- print "MakeCompound : ", ShapesOp.GetErrorCode()
- return anObj
-
-def NumberOfFaces(theShape):
- nb_faces = ShapesOp.NumberOfFaces(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfFaces : ", ShapesOp.GetErrorCode()
- return nb_faces
-
-def NumberOfEdges(theShape):
- nb_edges = ShapesOp.NumberOfEdges(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfEdges : ", ShapesOp.GetErrorCode()
- return nb_edges
-
-def ChangeOrientation(Shape):
- anObj = ShapesOp.ChangeOrientation(Shape)
- if ShapesOp.IsDone() == 0:
- print "ChangeOrientation : ", ShapesOp.GetErrorCode()
- return anObj
-
-def OrientationChange(Shape):
- anObj = ChangeOrientation(Shape)
- return anObj
-
-def GetFreeFacesIDs(theShape):
- anIDs = ShapesOp.GetFreeFacesIDs(theShape)
- if ShapesOp.IsDone() == 0:
- print "GetFreeFacesIDs : ", ShapesOp.GetErrorCode()
- return anIDs
-
-def GetSharedShapes(theShape1, theShape2, theShapeType):
- aList = ShapesOp.GetSharedShapes(theShape1, theShape2, theShapeType)
- if ShapesOp.IsDone() == 0:
- print "GetSharedShapes : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnPlane(theShape, theShapeType, theAx1, theState):
- aList = ShapesOp.GetShapesOnPlane(theShape, theShapeType, theAx1, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlane : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState):
- aList = ShapesOp.GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlaneIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState):
- aList = ShapesOp.GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnCylinder : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState):
- aList = ShapesOp.GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnCylinderIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState):
- aList = ShapesOp.GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnSphere : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState):
- aList = ShapesOp.GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnSphereIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
- aList = ShapesOp.GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnQuadrangle : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
- aList = ShapesOp.GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnQuadrangleIDs : ", ShapesOp.GetErrorCode()
- return aList
-
-def GetInPlace(theShapeWhere, theShapeWhat):
- anObj = ShapesOp.GetInPlace(theShapeWhere, theShapeWhat)
- if ShapesOp.IsDone() == 0:
- print "GetInPlace : ", ShapesOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Access to sub-shapes by their unique IDs inside the main shape.
-# -----------------------------------------------------------------------------
-
-# Obtain a composite sub-shape of <aShape>, composed from sub-shapes
-# of <aShape>, selected by their unique IDs inside <aShape>
-def GetSubShape(aShape, ListOfID):
- anObj = geom.AddSubShape(aShape,ListOfID)
- return anObj
-
-# Obtain unique ID of sub-shape <aSubShape> inside <aShape>
-def GetSubShapeID(aShape, aSubShape):
- anID = LocalOp.GetSubShapeIndex(aShape, aSubShape)
- if LocalOp.IsDone() == 0:
- print "GetSubShapeIndex : ", LocalOp.GetErrorCode()
- return anID
-
-# -----------------------------------------------------------------------------
-# Decompose objects
-# -----------------------------------------------------------------------------
-
-def SubShapeAll(aShape, aType):
- ListObj = ShapesOp.MakeExplode(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
- return ListObj
-
-def SubShapeAllIDs(aShape, aType):
- ListObj = ShapesOp.SubShapeAllIDs(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllIDs : ", ShapesOp.GetErrorCode()
- return ListObj
-
-def SubShapeAllSorted(aShape, aType):
- ListObj = ShapesOp.MakeExplode(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
- return ListObj
-
-def SubShapeAllSortedIDs(aShape, aType):
- ListIDs = ShapesOp.SubShapeAllIDs(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllSortedIDs : ", ShapesOp.GetErrorCode()
- return ListObj
-
-# Obtain a compound of sub-shapes of <aShape>,
-# selected by they indices in list of all sub-shapes of type <aType>
-def SubShape(aShape, aType, ListOfInd):
- ListOfIDs = []
- AllShapeList = SubShapeAll(aShape, aType)
- for ind in ListOfInd:
- ListOfIDs.append(GetSubShapeID(aShape, AllShapeList[ind - 1]))
- anObj = GetSubShape(aShape, ListOfIDs)
- return anObj
-
-# Obtain a compound of sub-shapes of <aShape>,
-# selected by they indices in sorted list of all sub-shapes of type <aType>
-def SubShapeSorted(aShape, aType, ListOfInd):
- ListOfIDs = []
- AllShapeList = SubShapeAllSorted(aShape, aType)
- for ind in ListOfInd:
- ListOfIDs.append(GetSubShapeID(aShape, AllShapeList[ind - 1]))
- anObj = GetSubShape(aShape, ListOfIDs)
- return anObj
-
-# -----------------------------------------------------------------------------
-# Healing operations
-# -----------------------------------------------------------------------------
-
-def ProcessShape(Shape, Operators, Parameters, Values):
- anObj = HealOp.ProcessShape(Shape, Operators, Parameters, Values)
- if HealOp.IsDone() == 0:
- print "ProcessShape : ", HealOp.GetErrorCode()
- return anObj
-
-def SuppressFaces(aShape,ListOfId):
- anObj = HealOp.SuppressFaces(aShape,ListOfId)
- if HealOp.IsDone() == 0:
- print "SuppressFaces : ", HealOp.GetErrorCode()
- return anObj
-
-def MakeSewing(ListShape,precision):
- comp = MakeCompound(ListShape)
- anObj = Sew(comp,precision)
- return anObj
-
-def Sew(aShape,precision):
- anObj = HealOp.Sew(aShape,precision)
- if HealOp.IsDone() == 0:
- print "Sew : ", HealOp.GetErrorCode()
- return anObj
-
-def SuppressInternalWires(aShape, Wires):
- anObj = HealOp.RemoveIntWires(aShape, Wires)
- if HealOp.IsDone() == 0:
- print "SuppressInternalWires : ", HealOp.GetErrorCode()
- return anObj
-
-def SuppressHoles(aShape, ListOfId):
- anObj = HealOp.FillHoles(aShape,ListOfId)
- if HealOp.IsDone() == 0:
- print "SuppressHoles : ", HealOp.GetErrorCode()
- return anObj
-
-def CloseContour(aShape, Wires, IsCommonVertex):
- anObj = HealOp.CloseContour(aShape, Wires, IsCommonVertex)
- if HealOp.IsDone() == 0:
- print "CloseContour : ", HealOp.GetErrorCode()
- return anObj
-
-def DivideEdge(aShape, EdgeID, Value, IsByParameter):
- anObj = HealOp.DivideEdge(aShape, EdgeID, Value, IsByParameter)
- if HealOp.IsDone() == 0:
- print "DivideEdge : ", HealOp.GetErrorCode()
- return anObj
-
-def GetFreeBoundary(Shape):
- anObj = HealOp.GetFreeBoundary(Shape)
- if HealOp.IsDone() == 0:
- print "GetFreeBoundaries : ", HealOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Create advanced objects
-# -----------------------------------------------------------------------------
-
-def MakeCopy(aShape):
- anObj = InsertOp.MakeCopy(aShape)
- if InsertOp.IsDone() == 0:
- print "MakeCopy : ", InsertOp.GetErrorCode()
- return anObj
-
-def MakeFilling(aShape,mindeg,maxdeg,tol2d,tol3d,nbiter,isApprox=0):
- anObj = PrimOp.MakeFilling(aShape,mindeg,maxdeg,tol2d,tol3d,nbiter,isApprox)
- if PrimOp.IsDone() == 0:
- print "MakeFilling : ", PrimOp.GetErrorCode()
- return anObj
-
-def MakeGlueFaces(aShape,aTolerance):
- anObj = ShapesOp.MakeGlueFaces(aShape,aTolerance)
- if ShapesOp.IsDone() == 0:
- print "MakeGlueFaces : ", ShapesOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Boolean (Common, Cut, Fuse, Section)
-# -----------------------------------------------------------------------------
-
-def MakeBoolean(shape1,shape2,operation):
- anObj = BoolOp.MakeBoolean(shape1,shape2,operation)
- if BoolOp.IsDone() == 0:
- print "MakeBoolean : ", BoolOp.GetErrorCode()
- return anObj
-
-def MakeCommon(s1, s2):
- return MakeBoolean(s1, s2, 1)
-
-def MakeCut(s1, s2):
- return MakeBoolean(s1, s2, 2)
-
-def MakeFuse(s1, s2):
- return MakeBoolean(s1, s2, 3)
-
-def MakeSection(s1, s2):
- return MakeBoolean(s1, s2, 4)
-
-def MakePartition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[],
- KeepNonlimitShapes=0):
- anObj = BoolOp.MakePartition(ListShapes, ListTools,
- ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials,
- KeepNonlimitShapes);
- if BoolOp.IsDone() == 0:
- print "MakePartition : ", BoolOp.GetErrorCode()
- return anObj
-
-def Partition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[],
- KeepNonlimitShapes=0):
- anObj = MakePartition(ListShapes, ListTools,
- ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials,
- KeepNonlimitShapes);
- return anObj
-
-def MakeHalfPartition(theShape, thePlane):
- anObj = BoolOp.MakeHalfPartition(theShape, thePlane)
- if BoolOp.IsDone() == 0:
- print "MakeHalfPartition : ", BoolOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Transform objects
-# -----------------------------------------------------------------------------
-
-def MakeTranslationTwoPoints(aShape,point1,point2):
- anObj = TrsfOp.TranslateTwoPointsCopy(aShape,point1,point2)
- if TrsfOp.IsDone() == 0:
- print "TranslateTwoPointsCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeTranslation(aShape,dx,dy,dz):
- anObj = TrsfOp.TranslateDXDYDZCopy(aShape,dx,dy,dz)
- if TrsfOp.IsDone() == 0:
- print "TranslateDXDYDZCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeTranslationVector(theObject, theVector):
- anObj = TrsfOp.TranslateVectorCopy(theObject, theVector)
- if TrsfOp.IsDone() == 0:
- print "TranslateVectorCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeRotation(aShape,axis,angle):
- anObj = TrsfOp.RotateCopy(aShape,axis,angle)
- if TrsfOp.IsDone() == 0:
- print "RotateCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeRotationThreePoints(aShape, centpoint, point1, point2):
- anObj = TrsfOp.RotateThreePointsCopy(aShape, centpoint, point1, point2)
- if TrsfOp.IsDone() == 0:
- print "RotateThreePointsCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeScaleTransform(aShape,theCenterofScale,factor):
- anObj = TrsfOp.ScaleShapeCopy(aShape,theCenterofScale,factor)
- if TrsfOp.IsDone() == 0:
- print "ScaleShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeMirrorByPlane(aShape,aPlane):
- anObj = TrsfOp.MirrorPlaneCopy(aShape,aPlane)
- if TrsfOp.IsDone() == 0:
- print "MirrorPlaneCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeMirrorByAxis(theObject, theAxis):
- anObj = TrsfOp.MirrorAxisCopy(theObject, theAxis)
- if TrsfOp.IsDone() == 0:
- print "MirrorAxisCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeMirrorByPoint(theObject, thePoint):
- anObj = TrsfOp.MirrorPointCopy(theObject, thePoint)
- if TrsfOp.IsDone() == 0:
- print "MirrorPointCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakePosition(aShape,theStartLCS,theEndLCS):
- anObj = TrsfOp.PositionShapeCopy(aShape,theStartLCS,theEndLCS)
- if TrsfOp.IsDone() == 0:
- print "PositionShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeOffset(aShape, anOffset):
- anObj = TrsfOp.OffsetShapeCopy(aShape, anOffset)
- if TrsfOp.IsDone() == 0:
- print "OffsetShapeCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Patterns
-# -----------------------------------------------------------------------------
-
-def MakeMultiTranslation1D(aShape,aDir,aStep,aNbTimes):
- anObj = TrsfOp.MultiTranslate1D(aShape,aDir,aStep,aNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeMultiTranslation2D(aShape,d1,step1,nbtimes1,d2,step2,nbtimes2):
- anObj = TrsfOp.MultiTranslate2D(aShape,d1,step1,nbtimes1,d2,step2,nbtimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate2D : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MultiRotate1D(aShape,aVec,aNbTimes):
- anObj = TrsfOp.MultiRotate1D(aShape,aVec,aNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2):
- anObj = TrsfOp.MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate2D : ", TrsfOp.GetErrorCode()
- return anObj
-
-def MakeMultiRotation1D(aShape,aDir,aPoint,aNbTimes):
- aVec = MakeLine(aPoint,aDir)
- anObj = MultiRotate1D(aShape,aVec,aNbTimes)
- return anObj
-
-def MakeMultiRotation2D(aShape,aDir,aPoint,anAngle,nbtimes1,aStep,nbtimes2):
- aVec = MakeLine(aPoint,aDir)
- anObj = MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2)
- return anObj
-
-# -----------------------------------------------------------------------------
-# Local operations
-# -----------------------------------------------------------------------------
-
-def MakeFilletAll(aShape,radius):
- anObj = LocalOp.MakeFilletAll(aShape,radius)
- if LocalOp.IsDone() == 0:
- print "MakeFilletAll : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeFillet(aShape,radius,aShapeType,ListShape):
- anObj = None
- if aShapeType == ShapeType["EDGE"]:
- anObj = LocalOp.MakeFilletEdges(aShape,radius,ListShape)
- else:
- anObj = LocalOp.MakeFilletFaces(aShape,radius,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeFillet : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeFilletR1R2(aShape,radius1,radius2,aShapeType,ListShape):
- anObj = None
- if aShapeType == ShapeType["EDGE"]:
- anObj = LocalOp.MakeFilletEdgesR1R2(aShape,radius1,radius2,ListShape)
- else:
- anObj = LocalOp.MakeFilletFacesR1R2(aShape,radius1,radius2,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeFilletR1R2 : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferAll(aShape,d):
- anObj = LocalOp.MakeChamferAll(aShape,d)
- if LocalOp.IsDone() == 0:
- print "MakeChamferAll : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferEdge(aShape,d1,d2,face1,face2):
- anObj = LocalOp.MakeChamferEdge(aShape,d1,d2,face1,face2)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdge : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferEdgeAD(aShape,d,angle,face1,face2):
- anObj = LocalOp.MakeChamferEdgeAD(aShape,d,angle,face1,face2)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdgeAD : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferFaces(aShape,d1,d2,ListShape):
- anObj = LocalOp.MakeChamferFaces(aShape,d1,d2,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeChamferFaces : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferFacesAD(aShape,d,angle,ListShape):
- anObj = LocalOp.MakeChamferFacesAD(aShape,d,angle,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeChamferFacesAD : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferEdges(aShape,d1,d2,ListShape):
- anObj = LocalOp.MakeChamferEdges(aShape,d1,d2,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdges : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamferEdgesAD(aShape,d,angle,ListShape):
- anObj = LocalOp.MakeChamferEdgesAD(aShape,d,angle,ListShape)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdgesAD : ", LocalOp.GetErrorCode()
- return anObj
-
-def MakeChamfer(aShape,d1,d2,aShapeType,ListShape):
- anObj = None
- if aShapeType == ShapeType["EDGE"]:
- anObj = MakeChamferEdge(aShape,d1,d2,ListShape[0],ListShape[1])
- else:
- anObj = MakeChamferFaces(aShape,d1,d2,ListShape)
- return anObj
-
-def Archimede(aShape,weight,WaterDensity,MeshingDeflection):
- anObj = LocalOp.MakeArchimede(aShape,weight,WaterDensity,MeshingDeflection)
- if LocalOp.IsDone() == 0:
- print "MakeArchimede : ", LocalOp.GetErrorCode()
- return anObj
-
-# -----------------------------------------------------------------------------
-# Information objects
-# -----------------------------------------------------------------------------
-
-def PointCoordinates(Point):
- aTuple = MeasuOp.PointCoordinates(Point)
- if MeasuOp.IsDone() == 0:
- print "PointCoordinates : ", MeasuOp.GetErrorCode()
- return aTuple
-
-def BasicProperties(Shape):
- aTuple = MeasuOp.GetBasicProperties(Shape)
- if MeasuOp.IsDone() == 0:
- print "BasicProperties : ", MeasuOp.GetErrorCode()
- return aTuple
-
-def BoundingBox(Shape):
- aTuple = MeasuOp.GetBoundingBox(Shape)
- if MeasuOp.IsDone() == 0:
- print "BoundingBox : ", MeasuOp.GetErrorCode()
- return aTuple
-
-def Inertia(Shape):
- aTuple = MeasuOp.GetInertia(Shape)
- if MeasuOp.IsDone() == 0:
- print "Inertia : ", MeasuOp.GetErrorCode()
- return aTuple
-
-def MinDistance(Shape1, Shape2):
- aTuple = MeasuOp.GetMinDistance(Shape1, Shape2)
- if MeasuOp.IsDone() == 0:
- print "MinDistance : ", MeasuOp.GetErrorCode()
- return aTuple[0]
-
-def Tolerance(Shape):
- aTuple = MeasuOp.GetTolerance(Shape)
- if MeasuOp.IsDone() == 0:
- print "Tolerance : ", MeasuOp.GetErrorCode()
- return aTuple
-
-def WhatIs(Shape):
- aDescr = MeasuOp.WhatIs(Shape)
- if MeasuOp.IsDone() == 0:
- print "WhatIs : ", MeasuOp.GetErrorCode()
- return aDescr
-
-def MakeCDG(aShape):
- anObj = MeasuOp.GetCentreOfMass(aShape)
- if MeasuOp.IsDone() == 0:
- print "GetCentreOfMass : ", MeasuOp.GetErrorCode()
- return anObj
-
-def CheckShape(theShape, theIsCheckGeom = 0):
- if theIsCheckGeom:
- (IsValid, Status) = MeasuOp.CheckShapeWithGeometry(theShape)
- else:
- (IsValid, Status) = MeasuOp.CheckShape(theShape)
-
- if MeasuOp.IsDone() == 0:
- print "CheckShape : ", MeasuOp.GetErrorCode()
- else:
- if IsValid == 0:
- print Status
- return IsValid
-
-# -----------------------------------------------------------------------------
-# Import/Export objects
-# -----------------------------------------------------------------------------
-
-def Import(filename, formatname):
- anObj = InsertOp.Import(filename, formatname)
- if InsertOp.IsDone() == 0:
- print "Import : ", InsertOp.GetErrorCode()
- return anObj
-
-def ImportBREP(theFileName):
- return Import(theFileName, "BREP")
-
-def ImportIGES(theFileName):
- return Import(theFileName, "IGES")
-
-def ImportSTEP(theFileName):
- return Import(theFileName, "STEP")
-
-def Export(aShape, filename, formatname):
- InsertOp.Export(aShape, filename, formatname)
- if InsertOp.IsDone() == 0:
- print "Export : ", InsertOp.GetErrorCode()
-
-def ExportBREP(theObject, theFileName):
- return Export(theObject, theFileName, "BREP")
-
-def ExportIGES(theObject, theFileName):
- return Export(theObject, theFileName, "IGES")
-
-def ExportSTEP(theObject, theFileName):
- return Export(theObject, theFileName, "STEP")
-
-# -----------------------------------------------------------------------------
-# Block operations
-# -----------------------------------------------------------------------------
-
-def MakeQuad(E1, E2, E3, E4):
- anObj = BlocksOp.MakeQuad(E1, E2, E3, E4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeQuad2Edges(E1, E2):
- anObj = BlocksOp.MakeQuad2Edges(E1, E2)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad2Edges : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeQuad4Vertices(V1, V2, V3, V4):
- anObj = BlocksOp.MakeQuad4Vertices(V1, V2, V3, V4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad4Vertices : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeHexa(F1, F2, F3, F4, F5, F6):
- anObj = BlocksOp.MakeHexa(F1, F2, F3, F4, F5, F6)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeHexa2Faces(F1, F2):
- anObj = BlocksOp.MakeHexa2Faces(F1, F2)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa2Faces : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetPoint(theShape, theX, theY, theZ, theEpsilon):
- anObj = BlocksOp.GetPoint(theShape, theX, theY, theZ, theEpsilon)
- if BlocksOp.IsDone() == 0:
- print "GetPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetEdge(theShape, thePoint1, thePoint2):
- anObj = BlocksOp.GetEdge(theShape, thePoint1, thePoint2)
- if BlocksOp.IsDone() == 0:
- print "GetEdge : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetEdgeNearPoint(theShape, thePoint):
- anObj = BlocksOp.GetEdgeNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetEdgeNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4):
- anObj = BlocksOp.GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByPoints : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetFaceByEdges(theShape, theEdge1, theEdge2):
- anObj = BlocksOp.GetFaceByEdges(theShape, theEdge1, theEdge2)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByEdges : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetOppositeFace(theBlock, theFace):
- anObj = BlocksOp.GetOppositeFace(theBlock, theFace)
- if BlocksOp.IsDone() == 0:
- print "GetOppositeFace : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetFaceNearPoint(theShape, thePoint):
- anObj = BlocksOp.GetFaceNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetFaceNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetFaceByNormale(theBlock, theVector):
- anObj = BlocksOp.GetFaceByNormale(theBlock, theVector)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByNormale : ", BlocksOp.GetErrorCode()
- return anObj
-
-def CheckCompoundOfBlocks(theCompound):
- (IsValid, BCErrors) = BlocksOp.CheckCompoundOfBlocks(theCompound)
- if BlocksOp.IsDone() == 0:
- print "CheckCompoundOfBlocks : ", BlocksOp.GetErrorCode()
- else:
- if IsValid == 0:
- Descr = BlocksOp.PrintBCErrors(theCompound, BCErrors)
- print Descr
- return IsValid
-
-def RemoveExtraEdges(theShape):
- anObj = BlocksOp.RemoveExtraEdges(theShape)
- if BlocksOp.IsDone() == 0:
- print "RemoveExtraEdges : ", BlocksOp.GetErrorCode()
- return anObj
-
-def CheckAndImprove(theShape):
- anObj = BlocksOp.CheckAndImprove(theShape)
- if BlocksOp.IsDone() == 0:
- print "CheckAndImprove : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeBlockExplode(theCompound, theMinNbFaces, theMaxNbFaces):
- aList = BlocksOp.ExplodeCompoundOfBlocks(theCompound, theMinNbFaces, theMaxNbFaces)
- if BlocksOp.IsDone() == 0:
- print "MakeBlockExplode : ", BlocksOp.GetErrorCode()
- return aList
-
-def GetBlockNearPoint(theCompound, thePoint):
- anObj = BlocksOp.GetBlockNearPoint(theCompound, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetBlockNearPoint : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetBlockByParts(theCompound, theParts):
- anObj = BlocksOp.GetBlockByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlockByParts : ", BlocksOp.GetErrorCode()
- return anObj
-
-def GetBlocksByParts(theCompound, theParts):
- aList = BlocksOp.GetBlocksByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlocksByParts : ", BlocksOp.GetErrorCode()
- return aList
-
-def MakeMultiTransformation1D(Block, DirFaceID1, DirFaceID2, NbTimes):
- anObj = BlocksOp.MakeMultiTransformation1D(Block, DirFaceID1, DirFaceID2, NbTimes)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation1D : ", BlocksOp.GetErrorCode()
- return anObj
-
-def MakeMultiTransformation2D(Block, DirFaceID1U, DirFaceID2U, NbTimesU,
- DirFaceID1V, DirFaceID2V, NbTimesV):
- anObj = BlocksOp.MakeMultiTransformation2D(Block, DirFaceID1U, DirFaceID2U, NbTimesU,
- DirFaceID1V, DirFaceID2V, NbTimesV)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation2D : ", BlocksOp.GetErrorCode()
- return anObj
-
-def Propagate(theShape):
- listChains = BlocksOp.Propagate(theShape)
- if BlocksOp.IsDone() == 0:
- print "Propagate : ", BlocksOp.GetErrorCode()
- return listChains
-
-# -----------------------------------------------------------------------------
-# Group operations
-# -----------------------------------------------------------------------------
-
-def CreateGroup(MainShape, ShapeType):
- anObj = GroupOp.CreateGroup(MainShape, ShapeType)
- if GroupOp.IsDone() == 0:
- print "CreateGroup : ", GroupOp.GetErrorCode()
- return anObj
-
-def AddObject(Group, SubShapeID):
- GroupOp.AddObject(Group, SubShapeID)
- if GroupOp.IsDone() == 0:
- print "AddObject : ", GroupOp.GetErrorCode()
-
-def RemoveObject(Group, SubShapeID):
- GroupOp.RemoveObject(Group, SubShapeID)
- if GroupOp.IsDone() == 0:
- print "RemoveObject : ", GroupOp.GetErrorCode()
-
-def UnionList (theGroup, theSubShapes):
- GroupOp.UnionList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "UnionList : ", GroupOp.GetErrorCode()
-
-def UnionIDs(theGroup, theSubShapes):
- GroupOp.UnionIDs(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "UnionIDs : ", GroupOp.GetErrorCode()
-
-def DifferenceList (theGroup, theSubShapes):
- GroupOp.DifferenceList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "DifferenceList : ", GroupOp.GetErrorCode()
-
-def DifferenceIDs(theGroup, theSubShapes):
- GroupOp.DifferenceIDs(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "DifferenceIDs : ", GroupOp.GetErrorCode()
-
-def GetObjectIDs(Group):
- ListIDs = GroupOp.GetObjects(Group)
- if GroupOp.IsDone() == 0:
- print "GetObjectIDs : ", GroupOp.GetErrorCode()
- return ListIDs
-
-def GetType(theGroup):
- aType = GroupOp.GetType(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetType : ", GroupOp.GetErrorCode()
- return aType
-
-def GetMainShape(theGroup):
- anObj = GroupOp.GetMainShape(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetMainShape : ", GroupOp.GetErrorCode()
- return anObj
-
-def GetEdgesByLength (theShape, min_length, max_length, include_min = 1, include_max = 1):
- """
- Create group of edges of theShape, whose length is in range [min_length, max_length].
- If include_min/max == 0, edges with length == min/max_length will not be included in result.
- """
-
- edges = SubShapeAll(theShape, ShapeType["EDGE"])
- edges_in_range = []
- for edge in edges:
- Props = BasicProperties(edge)
- if min_length <= Props[0] and Props[0] <= max_length:
- if (not include_min) and (min_length == Props[0]):
- skip = 1
- else:
- if (not include_max) and (Props[0] == max_length):
- skip = 1
- else:
- edges_in_range.append(edge)
-
- if len(edges_in_range) <= 0:
- print "No edges found by given criteria"
- return 0
-
- group_edges = CreateGroup(theShape, ShapeType["EDGE"])
- UnionList(group_edges, edges_in_range)
-
- return group_edges
-
-# Add Path to the system path
-#
-def addPath(Path):
- if (sys.path.count(Path) < 1):
- sys.path.append(Path)
+# From Salome version 3.2.0 geompy package suits for work in batch mode
+from geompy import *
