#include "SMDS_EdgePosition.hxx"
#include "SMDS_FacePosition.hxx"
#include "SMESHDS_Mesh.hxx"
-#include "SMESH_ControlsDef.hxx"
#include <LightApp_SelectionMgr.h>
#include <SUIT_FileDlg.h>
QCheckBox* myBaseChk;
QCheckBox* myElemChk;
QCheckBox* myAddChk;
+ QCheckBox* myCtrlChk;
};
/*!
myBaseChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_BASE_INFO" ), hB );
myElemChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_ELEM_INFO" ), hB );
myAddChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_ADD_INFO" ), hB );
+ myCtrlChk = new QCheckBox( SMESHGUI::tr( "PREF_DUMP_CTRL_INFO" ), hB );
- QHBoxLayout* layout = new QHBoxLayout( hB );
- layout->addWidget( myBaseChk );
- layout->addWidget( myElemChk );
- layout->addWidget( myAddChk );
+ QGridLayout* layout = new QGridLayout( hB );
+ layout->addWidget( myBaseChk, 0, 0 );
+ layout->addWidget( myElemChk, 0, 1 );
+ layout->addWidget( myAddChk, 1, 0 );
+ layout->addWidget( myCtrlChk, 1, 1 );
QPushButton* pb = new QPushButton( this );
l->addWidget( a3DHexPriTotal, 25, 1 );
l->addWidget( a3DPolLab, 26, 0 );
l->addWidget( a3DPolTotal, 26, 1 );
- l->addWidget( myLoadBtn, 27, 1, 1, 3 );
+ l->addWidget( myLoadBtn, 28, 1, 1, 3 );
l->setColumnStretch( 0, 0 );
l->setColumnStretch( 1, 5 );
l->setColumnStretch( 2, 5 );
l->setColumnStretch( 3, 5 );
- l->setRowStretch( 23, 5 );
+ l->setRowStretch( 27, 5 );
clear();
}
myAddInfo = new SMESHGUI_AddInfo( myTabWidget );
myTabWidget->addTab( myAddInfo, tr( "ADDITIONAL_INFO" ) );
+ // controls info
+
+ myCtrlInfo = new SMESHGUI_CtrlInfo( myTabWidget );
+ myTabWidget->addTab( myCtrlInfo, tr( "CTRL_INFO" ) );
+
// buttons
QPushButton* okBtn = new QPushButton( tr( "SMESH_BUT_OK" ), this );
if ( !CORBA::is_nil( obj ) ) {
myBaseInfo->showInfo( obj );
myAddInfo->showInfo( obj );
+ myCtrlInfo->showInfo( obj );
myActor = SMESH::FindActorByEntry( IO->getEntry() );
SVTK_Selector* selector = SMESH::GetViewWindow()->GetSelector();
disconnect( selMgr, 0, this, 0 );
selMgr->clearFilters();
- if ( myTabWidget->currentIndex() == BaseInfo || myTabWidget->currentIndex() == AddInfo ) {
+ if ( myTabWidget->currentIndex() == BaseInfo || myTabWidget->currentIndex() == AddInfo || myTabWidget->currentIndex() == CtrlInfo ) {
SMESH::SetPointRepresentation( false );
if ( SVTK_ViewWindow* aViewWindow = SMESH::GetViewWindow() )
aViewWindow->SetSelectionMode( ActorSelection );
bool anIsBase = true;
bool anIsElem = true;
bool anIsAdd = true;
+ bool anIsCtrl = true;
if ( SUIT_ResourceMgr* aResourceMgr = SMESHGUI::resourceMgr() ) {
anIsBase = aResourceMgr->booleanValue( "SMESH", "info_dump_base", anIsBase );
anIsElem = aResourceMgr->booleanValue( "SMESH", "info_dump_elem", anIsElem );
anIsAdd = aResourceMgr->booleanValue( "SMESH", "info_dump_add", anIsAdd );
+ anIsCtrl = aResourceMgr->booleanValue( "SMESH", "info_dump_ctrl", anIsCtrl );
}
DumpFileDlg fd( this );
fd.myBaseChk->setChecked( anIsBase );
fd.myElemChk->setChecked( anIsElem );
fd.myAddChk ->setChecked( anIsAdd );
+ fd.myCtrlChk->setChecked( anIsCtrl );
if ( fd.exec() == QDialog::Accepted )
{
QString aFileName = fd.selectedFile();
bool toBase = fd.myBaseChk->isChecked();
bool toElem = fd.myElemChk->isChecked();
bool toAdd = fd.myAddChk->isChecked();
+ bool toCtrl = fd.myCtrlChk->isChecked();
if ( !aFileName.isEmpty() ) {
QFileInfo aFileInfo( aFileName );
if ( toBase ) myBaseInfo->saveInfo( out );
if ( toElem ) myElemInfo->saveInfo( out );
if ( toAdd ) myAddInfo ->saveInfo( out );
+ if ( toCtrl ) myCtrlInfo->saveInfo( out );
}
}
}
+
+/*!
+ \class SMESHGUI_CtrlInfo
+ \brief Class for the mesh controls information widget.
+*/
+
+/*!
+ \brief Constructor
+ \param parent parent widget
+*/
+SMESHGUI_CtrlInfo::SMESHGUI_CtrlInfo( QWidget* parent )
+ : QFrame( parent ), myPlot( 0 ), myPlot3D( 0 )
+{
+ setFrameStyle( StyledPanel | Sunken );
+
+ QGridLayout* l = new QGridLayout( this );
+ l->setMargin( MARGIN );
+ l->setSpacing( SPACING );
+
+ // name
+ QLabel* aNameLab = new QLabel( tr( "NAME_LAB" ), this );
+ QLabel* aName = createField();
+ aName->setMinimumWidth( 150 );
+ myWidgets << aName;
+
+ // nodes info
+ QLabel* aNodesLab = new QLabel( tr( "NODES_INFO" ), this );
+ QLabel* aNodesFreeLab = new QLabel( tr( "NUMBER_OF_THE_FREE_NODES" ), this );
+ QLabel* aNodesFree = createField();
+ myWidgets << aNodesFree;
+ QLabel* aNodesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_NODES" ), this );
+ QLabel* aNodesDouble = createField();
+ myWidgets << aNodesDouble;
+
+ // edges info
+ QLabel* anEdgesLab = new QLabel( tr( "EDGES_INFO" ), this );
+ QLabel* anEdgesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_EDGES" ), this );
+ QLabel* anEdgesDouble = createField();
+ myWidgets << anEdgesDouble;
+
+ // faces info
+ QLabel* aFacesLab = new QLabel( tr( "FACES_INFO" ), this );
+ QLabel* aFacesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_FACES" ), this );
+ QLabel* aFacesDouble = createField();
+ myWidgets << aFacesDouble;
+ QLabel* aFacesOverLab = new QLabel( tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ), this );
+ QLabel* aFacesOver = createField();
+ myWidgets << aFacesOver;
+ QLabel* anAspectRatioLab = new QLabel( tr( "ASPECT_RATIO_HISTOGRAM" ), this );
+ myPlot = createPlot( this );
+
+ // volumes info
+ QLabel* aVolumesLab = new QLabel( tr( "VOLUMES_INFO" ), this );
+ QLabel* aVolumesDoubleLab = new QLabel( tr( "NUMBER_OF_THE_DOUBLE_VOLUMES" ), this );
+ QLabel* aVolumesDouble = createField();
+ myWidgets << aVolumesDouble;
+ QLabel* aVolumesOverLab = new QLabel( tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ), this );
+ QLabel* aVolumesOver = createField();
+ myWidgets << aVolumesOver;
+ QLabel* anAspectRatio3DLab = new QLabel( tr( "ASPECT_RATIO_3D_HISTOGRAM" ), this );
+ myPlot3D = createPlot( this );
+
+ myComputeFaceBtn = new QPushButton( tr( "BUT_COMPUTE" ), this );
+ myComputeFaceBtn->setAutoDefault( true );
+ myComputeFaceBtn->setFixedWidth( 80 );
+ myComputeFaceBtn->setVisible( false );
+ myComputeVolumeBtn = new QPushButton( tr( "BUT_COMPUTE" ), this );
+ myComputeVolumeBtn->setAutoDefault( true );
+ myComputeVolumeBtn->setFixedWidth( 80 );
+ myComputeVolumeBtn->setVisible( false );
+
+ connect( myComputeFaceBtn, SIGNAL( clicked() ), this, SLOT( computeFaceInfo() ) );
+ connect( myComputeVolumeBtn, SIGNAL( clicked() ), this, SLOT( computeVolumeInfo() ) );
+
+ setFontAttributes( aNameLab );
+ setFontAttributes( aNodesLab );
+ setFontAttributes( anEdgesLab );
+ setFontAttributes( aFacesLab );
+ setFontAttributes( aVolumesLab );
+
+ l->addWidget( aNameLab, 0, 0 );
+ l->addWidget( aName, 0, 1 );
+ l->addWidget( aNodesLab, 1, 0, 1, 2 );
+ l->addWidget( aNodesFreeLab, 2, 0 );
+ l->addWidget( aNodesFree, 2, 1 );
+ l->addWidget( aNodesDoubleLab, 3, 0 );
+ l->addWidget( aNodesDouble, 3, 1 );
+ l->addWidget( anEdgesLab, 4, 0, 1, 2 );
+ l->addWidget( anEdgesDoubleLab, 5, 0 );
+ l->addWidget( anEdgesDouble, 5, 1 );
+ l->addWidget( aFacesLab, 6, 0, 1, 2 );
+ l->addWidget( aFacesDoubleLab, 7, 0 );
+ l->addWidget( aFacesDouble, 7, 1 );
+ l->addWidget( aFacesOverLab, 8, 0 );
+ l->addWidget( aFacesOver, 8, 1 );
+ l->addWidget( anAspectRatioLab, 9, 0 );
+ l->addWidget( myComputeFaceBtn, 9, 1 );
+ l->addWidget( myPlot, 10, 0, 1, 2 );
+ l->addWidget( aVolumesLab, 11, 0, 1, 2 );
+ l->addWidget( aVolumesDoubleLab, 12, 0 );
+ l->addWidget( aVolumesDouble, 12, 1 );
+ l->addWidget( aVolumesOverLab, 13, 0 );
+ l->addWidget( aVolumesOver, 13, 1 );
+ l->addWidget( anAspectRatio3DLab, 14, 0 );
+ l->addWidget( myComputeVolumeBtn, 14, 1 );
+ l->addWidget( myPlot3D, 15, 0, 1, 2 );
+
+ l->setColumnStretch( 0, 0 );
+ l->setColumnStretch( 1, 5 );
+ l->setRowStretch ( 10, 5 );
+ l->setRowStretch ( 15, 5 );
+
+ clearInternal();
+}
+
+/*!
+ \brief Destructor
+*/
+SMESHGUI_CtrlInfo::~SMESHGUI_CtrlInfo()
+{
+}
+
+/*!
+ \brief Change widget font attributes (bold, ...).
+ \param w widget
+ \param attr font attributes (XORed flags)
+*/
+void SMESHGUI_CtrlInfo::setFontAttributes( QWidget* w )
+{
+ if ( w ) {
+ QFont f = w->font();
+ f.setBold( true );
+ w->setFont( f );
+ }
+}
+
+/*!
+ \brief Create info field
+ \return new info field
+*/
+QLabel* SMESHGUI_CtrlInfo::createField()
+{
+ QLabel* lab = new QLabel( this );
+ lab->setFrameStyle( StyledPanel | Sunken );
+ lab->setAlignment( Qt::AlignCenter );
+ lab->setAutoFillBackground( true );
+ QPalette pal = lab->palette();
+ pal.setColor( QPalette::Window, QApplication::palette().color( QPalette::Active, QPalette::Base ) );
+ lab->setPalette( pal );
+ lab->setMinimumWidth( 60 );
+ return lab;
+}
+
+/*!
+ \brief Create QwtPlot
+ \return new QwtPlot
+*/
+QwtPlot* SMESHGUI_CtrlInfo::createPlot( QWidget* parent )
+{
+ QwtPlot* aPlot = new QwtPlot( parent );
+ aPlot->setMinimumSize( 100, 100 );
+ QFont xFont = aPlot->axisFont( QwtPlot::xBottom );
+ xFont.setPointSize( 5 );
+ QFont yFont = aPlot->axisFont( QwtPlot::yLeft );
+ yFont.setPointSize( 5 );
+ aPlot->setAxisFont( QwtPlot::xBottom, xFont );
+ aPlot->setAxisFont( QwtPlot::yLeft, yFont );
+ aPlot->replot();
+ return aPlot;
+}
+
+
+/*!
+ \brief Show controls information on the selected object
+*/
+void SMESHGUI_CtrlInfo::showInfo( SMESH::SMESH_IDSource_ptr obj )
+{
+ clearInternal();
+ SMESH::long_array_var anElems;
+ long ctrlLimit = SMESHGUI::resourceMgr()->integerValue( "SMESH", "info_controls_limit", 3000 );
+
+ if ( CORBA::is_nil( obj ) ) return;
+ _PTR(SObject) aSO = SMESH::FindSObject( obj );
+ if ( !aSO ) return;
+ myWidgets[0]->setText( aSO->GetName().c_str() );
+
+ SALOME_ListIO selected;
+ SMESHGUI::selectionMgr()->selectedObjects( selected );
+ if ( selected.Extent() < 1 ) return;
+ Handle(SALOME_InteractiveObject) IO = selected.First();
+ SMESH_Actor* anActor = SMESH::FindActorByEntry( IO->getEntry() );
+ if ( !anActor ) anActor = SMESH::CreateActor( aSO->GetStudy(), aSO->GetID().c_str(), true );
+ if ( !anActor ) return;
+
+ SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_narrow( obj );
+ if ( aMesh->_is_nil() ) return;
+
+ SMESH::Controls::FunctorPtr aFunctor;
+
+ // nodes info
+ if ( aMesh->NbNodes() ) {
+ // free nodes
+ aFunctor.reset( new SMESH::Controls::FreeNodes() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ anElems = aMesh->GetElementsByType( SMESH::NODE );
+ myWidgets[1]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ // double nodes
+ SMESH::Controls::CoincidentNodes* aNodes = new SMESH::Controls::CoincidentNodes();
+ double tol = SMESHGUI::resourceMgr()->doubleValue( "SMESH", "equal_nodes_tolerance", 1e-7 );
+ aNodes->SetTolerance( tol );
+ aFunctor.reset( aNodes );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ myWidgets[2]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ }
+
+ // edges info
+ if ( aMesh->NbEdges() ) {
+ // double edges
+ aFunctor.reset( new SMESH::Controls::CoincidentElements1D() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ anElems = aMesh->GetElementsByType( SMESH::EDGE );
+ myWidgets[3]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ }
+
+ // faces info
+ if ( aMesh->NbFaces() ) {
+ // double faces
+ aFunctor.reset( new SMESH::Controls::CoincidentElements2D() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ anElems = aMesh->GetElementsByType( SMESH::FACE );
+ myWidgets[4]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ // over constrained faces
+ aFunctor.reset( new SMESH::Controls::OverConstrainedFace() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ myWidgets[5]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ // aspect Ratio histogram
+ if ( aMesh->NbFaces() <= ctrlLimit )
+ computeFaceInfo();
+ else
+ myComputeFaceBtn->setVisible( true );
+ }
+
+ // volumes info
+ if ( aMesh->NbVolumes() ) {
+ // double volumes
+ aFunctor.reset( new SMESH::Controls::CoincidentElements3D() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ anElems = aMesh->GetElementsByType( SMESH::VOLUME );
+ myWidgets[6]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ // over constrained volumes
+ aFunctor.reset( new SMESH::Controls::OverConstrainedVolume() );
+ aFunctor->SetMesh( anActor->GetObject()->GetMesh() );
+ myWidgets[7]->setText( QString::number( nbElemsControl( anElems, aFunctor ) ) );
+ // aspect Ratio 3D histogram
+ if ( aMesh->NbVolumes() <= ctrlLimit )
+ computeVolumeInfo();
+ else
+ myComputeVolumeBtn->setVisible( true );
+ }
+}
+
+void SMESHGUI_CtrlInfo::computeFaceInfo() {
+ myComputeFaceBtn->setVisible( false );
+
+ SUIT_OverrideCursor wc;
+ SALOME_ListIO selected;
+ SMESHGUI::selectionMgr()->selectedObjects( selected );
+ if ( selected.Extent() < 1 ) return;
+ SMESH::SMESH_IDSource_var obj = SMESH::IObjectToInterface<SMESH::SMESH_IDSource>( selected.First() );
+ if ( CORBA::is_nil( obj ) ) return;
+ _PTR(SObject) aSO = SMESH::FindSObject( obj );
+ if ( !aSO ) return;
+ SMESH_Actor* anActor = SMESH::FindActorByEntry( selected.First()->getEntry() );
+ if ( !anActor ) anActor = SMESH::CreateActor( aSO->GetStudy(), aSO->GetID().c_str(), true );
+ if ( !anActor ) return;
+ SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_narrow( obj );
+ if ( aMesh->_is_nil() ) return;
+
+ SMESH::long_array_var anElems;
+ anElems = aMesh->GetElementsByType( SMESH::FACE );
+ SMESH::Controls::NumericalFunctorPtr anAspectRatio( new SMESH::Controls::AspectRatio() );
+ int cprecision = 6;
+ if ( SMESHGUI::resourceMgr()->booleanValue( "SMESH", "use_precision", false ) )
+ cprecision = SMESHGUI::resourceMgr()->integerValue( "SMESH", "controls_precision", -1 );
+ anAspectRatio->SetPrecision( cprecision );
+ anAspectRatio->SetMesh( anActor->GetObject()->GetMesh() );
+ Plot2d_Histogram* aHistogram = getHistogram( anElems, anAspectRatio );
+
+ if ( !aHistogram->isEmpty() ) {
+ QwtPlotItem* anItem = aHistogram->createPlotItem();
+ anItem->attach( myPlot );
+ myPlot->replot();
+ }
+}
+
+void SMESHGUI_CtrlInfo::computeVolumeInfo() {
+ myComputeVolumeBtn->setVisible( false );
+
+ SUIT_OverrideCursor wc;
+ SALOME_ListIO selected;
+ SMESHGUI::selectionMgr()->selectedObjects( selected );
+ if ( selected.Extent() < 1 ) return;
+ SMESH::SMESH_IDSource_var obj = SMESH::IObjectToInterface<SMESH::SMESH_IDSource>( selected.First() );
+ if ( CORBA::is_nil( obj ) ) return;
+ _PTR(SObject) aSO = SMESH::FindSObject( obj );
+ if ( !aSO ) return;
+ SMESH_Actor* anActor = SMESH::FindActorByEntry( selected.First()->getEntry() );
+ if ( !anActor ) anActor = SMESH::CreateActor( aSO->GetStudy(), aSO->GetID().c_str(), true );
+ if ( !anActor ) return;
+ SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_narrow( obj );
+ if ( aMesh->_is_nil() ) return;
+
+ SMESH::long_array_var anElems;
+ anElems = aMesh->GetElementsByType( SMESH::VOLUME );
+ SMESH::Controls::NumericalFunctorPtr anAspectRatio3D( new SMESH::Controls::AspectRatio3D() );
+ int cprecision = 6;
+ if ( SMESHGUI::resourceMgr()->booleanValue( "SMESH", "use_precision", false ) )
+ cprecision = SMESHGUI::resourceMgr()->integerValue( "SMESH", "controls_precision", -1 );
+ anAspectRatio3D->SetPrecision( cprecision );
+ anAspectRatio3D->SetMesh( anActor->GetObject()->GetMesh() );
+ Plot2d_Histogram* aHistogram = getHistogram( anElems, anAspectRatio3D );
+
+ if ( !aHistogram->isEmpty() ) {
+ QwtPlotItem* anItem = aHistogram->createPlotItem();
+ anItem->attach( myPlot3D );
+ myPlot3D->replot();
+ }
+}
+
+/*!
+ \brief Internal clean-up (reset widget)
+*/
+void SMESHGUI_CtrlInfo::clearInternal()
+{
+ myComputeFaceBtn->setVisible( false );
+ myComputeVolumeBtn->setVisible( false );
+ myPlot->detachItems();
+ myPlot3D->detachItems();
+ myPlot->replot();
+ myPlot3D->replot();
+ myWidgets[0]->setText( QString() );
+ for ( int i = 1; i < myWidgets.count(); i++ )
+ myWidgets[i]->setText( QString::number( 0 ) );
+}
+
+int SMESHGUI_CtrlInfo::nbElemsControl( SMESH::long_array_var& elems, SMESH::Controls::FunctorPtr theFunctor ) {
+ int nbElems = 0;
+ for( int i = 0; i < elems->length(); i++ ) {
+ if ( SMESH::Controls::Predicate* aPredicate = dynamic_cast<SMESH::Controls::Predicate*>( theFunctor.get() ) )
+ if ( aPredicate->IsSatisfy( elems[i] ) ) nbElems++;
+ }
+ return nbElems;
+}
+
+Plot2d_Histogram* SMESHGUI_CtrlInfo::getHistogram( SMESH::long_array_var& elems, SMESH::Controls::NumericalFunctorPtr aNumFun ) {
+ Plot2d_Histogram* aHistogram = new Plot2d_Histogram();
+ std::vector<int> elements;
+ elements.resize( elems->length() );
+ for ( unsigned i = 0; i < elements.size(); i++ )
+ elements[i] = elems[i];
+ int nbIntervals = SMESHGUI::resourceMgr()->integerValue( "SMESH", "scalar_bar_num_colors", false );
+ double* range = new double[2];
+ range[0] = aNumFun->GetValue( elems[0] );
+ range[1] = aNumFun->GetValue( elems[0] );
+ for( int i = 1; i < elems->length(); i++ ) {
+ if ( range[0] > aNumFun->GetValue( elems[i] ) ) range[0] = aNumFun->GetValue( elems[i] );
+ if ( range[1] < aNumFun->GetValue( elems[i] ) ) range[1] = aNumFun->GetValue( elems[i] );
+ }
+ std::vector<int> nbEvents;
+ std::vector<double> funValues;
+ aNumFun->GetHistogram( nbIntervals, nbEvents, funValues, elements, range );
+ for ( int i = 0; i < std::min( nbEvents.size(), funValues.size() -1 ); i++ )
+ aHistogram->addPoint( funValues[i] + ( funValues[i+1] - funValues[i] ) / 2.0, static_cast<double>( nbEvents[i] ) );
+ if ( funValues.size() >= 2 )
+ aHistogram->setWidth( ( funValues[1] - funValues[0] ) * 0.8 );
+ aHistogram->setColor( palette().color( QPalette::Highlight ) );
+
+ return aHistogram;
+}
+
+void SMESHGUI_CtrlInfo::saveInfo( QTextStream &out ) {
+ out << QString( 20, '-' ) << "\n";
+ out << tr( "CTRL_INFO" ) << "\n";
+ out << QString( 20, '-' ) << "\n";
+ out << tr( "NAME_LAB" ) << " " << myWidgets[0]->text() << "\n";
+ out << tr( "NODES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_FREE_NODES" ) << ": " << myWidgets[1]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_NODES" ) << ": " << myWidgets[2]->text() << "\n";
+ out << tr( "EDGES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_EDGES" ) << ": " << myWidgets[3]->text() << "\n";
+ out << tr( "FACES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_FACES" ) << ": " << myWidgets[4]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ) << ": " << myWidgets[5]->text() << "\n";
+ out << tr( "VOLUMES_INFO" ) << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_DOUBLE_VOLUMES" ) << ": " << myWidgets[6]->text() << "\n";
+ out << QString( SPACING_INFO, ' ' ) << tr( "NUMBER_OF_THE_OVER_CONSTRAINED" ) << ": " << myWidgets[7]->text() << "\n";
+}
+
+/*!
+ \class SMESHGUI_CtrlInfoDlg
+ \brief Controls information dialog box
+*/
+
+/*!
+ \brief Constructor
+ \param parent parent widget
+ \param page specifies the dialog page to be shown at the start-up
+*/
+SMESHGUI_CtrlInfoDlg::SMESHGUI_CtrlInfoDlg( QWidget* parent )
+: QDialog( parent )
+{
+ setAttribute( Qt::WA_DeleteOnClose, true );
+ setWindowTitle( tr( "CTRL_INFO" ) );
+ setMinimumSize( 400, 600 );
+
+ myCtrlInfo = new SMESHGUI_CtrlInfo( this );
+
+ // buttons
+ QPushButton* okBtn = new QPushButton( tr( "SMESH_BUT_OK" ), this );
+ okBtn->setAutoDefault( true );
+ okBtn->setDefault( true );
+ okBtn->setFocus();
+
+ QGridLayout* l = new QGridLayout ( this );
+ l->setMargin( MARGIN );
+ l->setSpacing( SPACING );
+ l->addWidget( myCtrlInfo, 0, 0, 1, 3 );
+ l->addWidget( okBtn, 1, 1 );
+ l->setColumnStretch( 0, 5 );
+ l->setColumnStretch( 2, 5 );
+
+ connect( okBtn, SIGNAL( clicked() ), this, SLOT( reject() ) );
+ connect( SMESHGUI::GetSMESHGUI(), SIGNAL( SignalDeactivateActiveDialog() ), this, SLOT( deactivate() ) );
+ connect( SMESHGUI::GetSMESHGUI(), SIGNAL( SignalCloseAllDialogs() ), this, SLOT( reject() ) );
+
+ updateSelection();
+}
+
+/*!
+ \brief Destructor
+*/
+SMESHGUI_CtrlInfoDlg::~SMESHGUI_CtrlInfoDlg()
+{
+}
+
+/*!
+ \brief Show controls information
+ \param IO interactive object
+*/
+void SMESHGUI_CtrlInfoDlg::showInfo( const Handle(SALOME_InteractiveObject)& IO )
+{
+ if ( SMESH::SMESH_IDSource_var obj = SMESH::IObjectToInterface<SMESH::SMESH_IDSource>( IO ) )
+ myCtrlInfo->showInfo( obj );
+}
+
+/*!
+ \brief Perform clean-up actions on the dialog box closing.
+*/
+void SMESHGUI_CtrlInfoDlg::reject()
+{
+ SMESH::SetPointRepresentation( false );
+ QDialog::reject();
+}
+
+/*!
+ \brief Setup selection mode depending on the current dialog box state.
+*/
+void SMESHGUI_CtrlInfoDlg::updateSelection()
+{
+ LightApp_SelectionMgr* selMgr = SMESHGUI::selectionMgr();
+ disconnect( selMgr, 0, this, 0 );
+ SMESH::SetPointRepresentation( false );
+ connect( selMgr, SIGNAL( currentSelectionChanged() ), this, SLOT( updateInfo() ) );
+ updateInfo();
+}
+
+/*!
+ \brief Show mesh information
+*/
+void SMESHGUI_CtrlInfoDlg::updateInfo()
+{
+ SUIT_OverrideCursor wc;
+
+ SALOME_ListIO selected;
+ SMESHGUI::selectionMgr()->selectedObjects( selected );
+
+ if ( selected.Extent() == 1 ) {
+ Handle(SALOME_InteractiveObject) IO = selected.First();
+ showInfo( IO );
+ }
+}
+
+/*!
+ \brief Activate dialog box
+*/
+void SMESHGUI_CtrlInfoDlg::activate()
+{
+ SMESHGUI::GetSMESHGUI()->EmitSignalDeactivateDialog();
+ SMESHGUI::GetSMESHGUI()->SetActiveDialogBox( this );
+ updateSelection();
+}
+
+/*!
+ \brief Deactivate dialog box
+*/
+void SMESHGUI_CtrlInfoDlg::deactivate()
+{
+ disconnect( SMESHGUI::selectionMgr(), SIGNAL( currentSelectionChanged() ), this, SLOT( updateInfo() ) );
+}
+
+
