Issue #2563: CEA 2018-1 Common

Added some unit tests.

diff --git a/src/FeaturesPlugin/CMakeLists.txt b/src/FeaturesPlugin/CMakeLists.txt
index a4d80e857c93e40378ea05160cbe797142b7cecd..8361d95d1d105dca86d34acf3f41839b64f7de49 100644 (file)
--- a/src/FeaturesPlugin/CMakeLists.txt
+++ b/src/FeaturesPlugin/CMakeLists.txt
@@ -301,4 +301,26 @@ ADD_UNIT_TESTS(TestExtrusion.py
                TestBooleanSmash_Face_Face.py
                TestBooleanFuse_SimpleMode.py
                TestBooleanFuse_RemoveEdges.py
+               TestBooleanCommon_Vertex_Vertex.py
+               TestBooleanCommon_VertexCompound_VertexCompound.py
+               TestBooleanCommon_Edge_Edge.py
+               TestBooleanCommon_EdgeCompound_EdgeCompound.py
+               TestBooleanCommon_Wire_Wire.py
+               TestBooleanCommon_WireCompound_WireCompound.py
+               TestBooleanCommon_Face_Face.py
+               TestBooleanCommon_FaceCompound_FaceCompound.py
+               TestBooleanCommon_Shell_Shell.py
+               TestBooleanCommon_ShellCompound_ShellCompound.py
+               TestBooleanCommon_Solid_Face.py
+               TestBooleanCommon_Solid_Shell.py
+               TestBooleanCommon_Solid_Solid.py
+               TestBooleanCommon_SolidCompound_Face.py
+               TestBooleanCommon_SolidCompound_Shell.py
+               TestBooleanCommon_SolidCompound_SolidCompound.py
+               TestBooleanCommon_CompSolid_Face.py
+               TestBooleanCommon_CompSolid_Shell.py
+               TestBooleanCommon_CompSolid_CompSolid.py
+               TestBooleanCommon_CompSolidCompound_Face.py
+               TestBooleanCommon_CompSolidCompound_Shell.py
+               TestBooleanCommon_CompSolidCompound_CompSolidCompound.py
 )

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_CompSolidCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_CompSolidCompound.py
new file mode 100644 (file)
index 0000000..7403d06
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_CompSolidCompound.py
@@ -0,0 +1,113 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -12.17630887873155, 30.26420160631515)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-12.17630887873155, 30.26420160631515, -3.763260360039565, 22.15708212466651)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-3.763260360039565, 22.15708212466651, -11.56445080464485, 13.8969981244962)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-11.56445080464485, 13.8969981244962, -20.89528643446688, 23.53376279136156)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -3.763260360039565, 22.15708212466651)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 15.35730445516949, 31.02902419892351)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(15.35730445516949, 31.02902419892351, 24.53517556646984, 20.93336597649314)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(24.53517556646984, 20.93336597649314, 17.03991415890789, 12.67328197632283)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(17.03991415890789, 12.67328197632283, 7.862043047607545, 23.07486923579655)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 24.53517556646984, 20.93336597649314)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(-6.516621693429666, 11.60253034667112, -9.88184110090646, 19.09779175423307)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-9.88184110090646, 19.09779175423307, -1.162863545171131, 18.94482723571139)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, 0.8256751956106094, 13.43810456893119)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_2.addLine(0.8256751956106094, 13.43810456893119, -6.516621693429666, 11.60253034667112)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
+SketchLine_15 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, -6.516621693429666, 11.60253034667112)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.endPoint())
+SketchLine_16 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 15.35730445516949, 18.79186271718972)
+SketchLine_16.result().setColor(225, 0, 0)
+SketchLine_17 = Sketch_2.addLine(15.35730445516949, 18.79186271718972, 12.75690764030107, 10.22584967997607)
+SketchLine_17.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchLine_18 = Sketch_2.addLine(12.75690764030107, 10.22584967997607, 6.179433343869151, 7.778417383629304)
+SketchLine_18.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
+SketchLine_19 = Sketch_2.addLine(6.179433343869151, 7.778417383629304, 6.332397862390824, 16.34443042084296)
+SketchLine_19.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
+SketchLine_20 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 12.75690764030107, 10.22584967997607)
+SketchLine_20.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "Extrusion_2_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [10])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [36])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [72])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Face.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Face.py
new file mode 100644 (file)
index 0000000..5e761e5
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Face.py
@@ -0,0 +1,104 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
+SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(19.22650602409638, 27.01445783132531, -12.83325439216414, 27.01445783132531)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 27.01445783132531, -12.83325439216414, 11.0281619215649)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 11.0281619215649, 19.22650602409638, 11.0281619215649)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchLine_14 = Sketch_2.addLine(19.22650602409638, 11.0281619215649, 19.22650602409638, 27.01445783132531)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPOUND", "Compound_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Shell.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Shell.py
new file mode 100644 (file)
index 0000000..74c10c9
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolidCompound_Shell.py
@@ -0,0 +1,108 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
+SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(19.22650602409638, 26.41583731352732, -12.83325439216414, 26.41583731352732)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 26.41583731352732, -12.83325439216414, 12.07337391600091)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 12.07337391600091, 19.22650602409638, 12.07337391600091)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchLine_14 = Sketch_2.addLine(19.22650602409638, 12.07337391600091, 19.22650602409638, 26.41583731352732)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
+SketchLine_15 = Sketch_2.addLine(0.2648302996693306, 26.41583731352732, -0.2234771832481639, 12.07337391600092)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_11.result())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_13.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchLine_13f-SketchLine_14f-SketchLine_15f"), model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_15r")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("COMPOUND", "Compound_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_CompSolid.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_CompSolid.py
new file mode 100644 (file)
index 0000000..7e8a9b9
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_CompSolid.py
@@ -0,0 +1,87 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(47.26932589060148, 52.61651755566245, -44.41221948537944, 52.61651755566245)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-44.41221948537944, 52.61651755566245, -44.41221948537944, -26.74931734128092)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-44.41221948537944, -26.74931734128092, 47.26932589060148, -26.74931734128092)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(47.26932589060148, -26.74931734128092, 47.26932589060148, 52.61651755566245)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(7.069530544036858, 52.61651755566245, 10.55455403994589, -26.74931734128092)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(95.24043941744291, 32.97847252814945, 25.14447162912627, 32.97847252814945)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_2.addLine(25.14447162912627, 32.97847252814945, 25.14447162912627, -11.61656767103746)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_2.addLine(25.14447162912627, -11.61656767103746, 95.24043941744291, -11.61656767103746)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchLine_9 = Sketch_2.addLine(95.24043941744291, -11.61656767103746, 95.24043941744291, 32.97847252814945)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(63.78513134811883, 32.97847252814945, 65.47170548447893, -11.61656767103746)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [6])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [24])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [48])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Face.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Face.py
new file mode 100644 (file)
index 0000000..c81d3ab
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Face.py
@@ -0,0 +1,83 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(21.16527496861552, 26.63979884904572, -22.80735826270614, 26.63979884904572)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-22.80735826270614, 26.63979884904572, -22.80735826270614, -13.87637783487681)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-22.80735826270614, -13.87637783487681, 21.16527496861552, -13.87637783487681)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(21.16527496861552, -13.87637783487681, 21.16527496861552, 26.63979884904572)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(-2.257333687264361, 26.63979884904572, -2.257333687264361, -13.87637783487681)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(29.6987556208597, 11.4175813298688, 13.10955704685832, 11.4175813298688)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_2.addLine(13.10955704685832, 11.4175813298688, 13.10955704685832, -4.852594194632538)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_2.addLine(13.10955704685832, -4.852594194632538, 29.6987556208597, -4.852594194632538)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchLine_9 = Sketch_2.addLine(29.6987556208597, -4.852594194632538, 29.6987556208597, 11.4175813298688)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Shell.py b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Shell.py
new file mode 100644 (file)
index 0000000..6666e20
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_CompSolid_Shell.py
@@ -0,0 +1,87 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(15.15938358623833, 14.4352070421809, -11.43137169301882, 14.4352070421809)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-11.43137169301882, 14.4352070421809, -11.43137169301882, -6.935604568322221)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-11.43137169301882, -6.935604568322221, 15.15938358623833, -6.935604568322221)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(15.15938358623833, -6.935604568322221, 15.15938358623833, 14.4352070421809)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(1.934351860046943, 14.4352070421809, 2.075043686921314, -6.935604568322221)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(26.29086071781277, 6.827405438264643, 9.220324256871813, 6.827405438264643)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_2.addLine(9.220324256871813, 6.827405438264643, 9.220324256871813, -3.640935176083419)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_2.addLine(9.220324256871813, -3.640935176083419, 26.29086071781277, -3.640935176083419)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchLine_9 = Sketch_2.addLine(26.29086071781277, -3.640935176083419, 26.29086071781277, 6.827405438264643)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(18.73204224198193, 6.827405438264643, 19.20309616379092, -3.640935176083419)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_10r"), model.selection("FACE", "Sketch_2/Face-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_10f")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("COMPSOLID", "Extrusion_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_EdgeCompound_EdgeCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_EdgeCompound_EdgeCompound.py
new file mode 100644 (file)
index 0000000..8dfee9b
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_EdgeCompound_EdgeCompound.py
@@ -0,0 +1,59 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-77.19749092035903, 24.18794374198263, -26.50243221408208, 23.76942369170098)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-52.21940522238806, 23.98173370989996, -68.62380444441784, 24.11716249058297)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchLine_3 = Sketch_1.addLine(9.658082674231901, 24.38959180621407, 76.00931510902234, 24.79203653255435)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(31.27467463593981, 24.52070441885453, 55.13167389667986, 24.6654059290823)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Edge_1_1"), model.selection("EDGE", "Edge_2_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Edge_1_2"), model.selection("EDGE", "Edge_2_1")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [4])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Edge_Edge.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Edge_Edge.py
new file mode 100644 (file)
index 0000000..d1e0aca
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Edge_Edge.py
@@ -0,0 +1,50 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-57.23353499871462, -2.917111725546991, 40.54932729918568, 17.67239476025231)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-81.47249047471176, -8.020952206935315, 40.54932729918568, 17.67239476025231)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.endPoint())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("EDGE", "Edge_1_1"), model.selection("EDGE", "Edge_1_2")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [2])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_FaceCompound_FaceCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_FaceCompound_FaceCompound.py
new file mode 100644 (file)
index 0000000..4b1790b
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_FaceCompound_FaceCompound.py
@@ -0,0 +1,113 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-26.91983967935873, 43.92184368737476, -89.26052104208418, 43.92184368737476)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 43.92184368737476, -89.26052104208418, 10.32264529058116)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 10.32264529058116, -26.91983967935873, 10.32264529058116)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-26.91983967935873, 10.32264529058116, -26.91983967935873, 43.92184368737476)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(92.09418837675352, 44.32665330661324, 12.75150300601203, 44.32665330661324)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(12.75150300601203, 44.32665330661324, 12.75150300601203, 10.32264529058116)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(12.75150300601203, 10.32264529058116, 92.09418837675352, 10.32264529058116)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(92.09418837675352, 10.32264529058116, 92.09418837675352, 44.32665330661324)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_9 = Sketch_2.addLine(-44.32665330661324, 21.65731462925853, -65.78156312625251, 21.65731462925853)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchLine_10 = Sketch_2.addLine(-65.78156312625251, 21.65731462925853, -65.78156312625251, -10.72745490981964)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchLine_11 = Sketch_2.addLine(-65.78156312625251, -10.72745490981964, -44.32665330661324, -10.72745490981964)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-44.32665330661324, -10.72745490981964, -44.32665330661324, 21.65731462925853)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
+SketchLine_13 = Sketch_2.addLine(64.56713426853709, 24.08617234468937, 42.70741482965934, 24.08617234468937)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchLine_14 = Sketch_2.addLine(42.70741482965934, 24.08617234468937, 42.70741482965934, -10.32264529058116)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchLine_15 = Sketch_2.addLine(42.70741482965934, -10.32264529058116, 64.56713426853709, -10.32264529058116)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchLine_16 = Sketch_2.addLine(64.56713426853709, -10.32264529058116, 64.56713426853709, 24.08617234468937)
+SketchLine_16.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_14.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_15.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_16.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f"), model.selection("FACE", "Sketch_1/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_12f"), model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_14f-SketchLine_15f-SketchLine_16f")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_2_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Face_Face.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Face_Face.py
new file mode 100644 (file)
index 0000000..75ef3b7
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Face_Face.py
@@ -0,0 +1,78 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(24.08617234468939, 57.68537074148297, -74.28256513026052, 57.68537074148297)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-74.28256513026052, 57.68537074148297, -74.28256513026052, 13.96593186372746)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-74.28256513026052, 13.96593186372746, 24.08617234468939, 13.96593186372746)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(24.08617234468939, 13.96593186372746, 24.08617234468939, 57.68537074148297)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_5 = Sketch_2.addLine(-6.679358717434877, 28.9438877755511, -34.20641282565131, 28.9438877755511)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_2.addLine(-34.20641282565131, 28.9438877755511, -34.20641282565131, -14.37074148296594)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_2.addLine(-34.20641282565131, -14.37074148296594, -6.679358717434877, -14.37074148296594)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_2.addLine(-6.679358717434877, -14.37074148296594, -6.679358717434877, 28.9438877755511)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f"), model.selection("FACE", "Sketch_2/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_1_2")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_ShellCompound_ShellCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_ShellCompound_ShellCompound.py
new file mode 100644 (file)
index 0000000..fe5ec1c
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_ShellCompound_ShellCompound.py
@@ -0,0 +1,131 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-11.4055110220441, 59.07236770836705, -90.54579158316633, 59.07236770836705)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-90.54579158316633, 59.07236770836705, -90.54579158316633, 18.29259905792451)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-90.54579158316633, 18.29259905792451, -11.4055110220441, 18.29259905792451)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-11.4055110220441, 18.29259905792451, -11.4055110220441, 59.07236770836705)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(116.15, 58.70699100906781, 29.5612224448898, 58.70699100906781)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(29.5612224448898, 58.70699100906781, 29.5612224448898, 16.80919541788544)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(29.5612224448898, 16.80919541788544, 116.15, 16.80919541788544)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(116.15, 16.80919541788544, 116.15, 58.70699100906781)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+SketchLine_9 = Sketch_1.addLine(-51.44118236472945, 59.07236770836705, -50.51012024048097, 18.29259905792451)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
+SketchLine_10 = Sketch_1.addLine(72.85561122244489, 16.80919541788544, 73.32114228456915, 58.70699100906781)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_5.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(-33.65512410802471, 32.35440881763527, -66.62101906518004, 32.35440881763527)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-66.62101906518004, 32.35440881763527, -66.62101906518004, -10.93997995991984)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchLine_13 = Sketch_2.addLine(-66.62101906518004, -10.93997995991984, -33.65512410802471, -10.93997995991984)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchLine_14 = Sketch_2.addLine(-33.65512410802471, -10.93997995991984, -33.65512410802471, 32.35440881763527)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
+SketchLine_15 = Sketch_2.addLine(-66.62101906518004, 10.47444889779559, -33.6551241080247, 9.543386773547091)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_12.result())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_14.result())
+SketchLine_16 = Sketch_2.addLine(86.07316931157348, 30.95781563126252, 62.43123950606181, 30.95781563126252)
+SketchLine_16.result().setColor(225, 0, 0)
+SketchLine_17 = Sketch_2.addLine(62.43123950606181, 30.95781563126252, 62.43123950606181, -14.66422845691383)
+SketchLine_17.result().setColor(225, 0, 0)
+SketchLine_18 = Sketch_2.addLine(62.43123950606181, -14.66422845691383, 86.07316931157348, -14.66422845691383)
+SketchLine_18.result().setColor(225, 0, 0)
+SketchLine_19 = Sketch_2.addLine(86.07316931157348, -14.66422845691383, 86.07316931157348, 30.95781563126252)
+SketchLine_19.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_16.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_17.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_18.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_19.result())
+SketchLine_20 = Sketch_2.addLine(62.43123950606181, 3.491482965931855, 86.07316931157347, 4.888076152304602)
+SketchLine_20.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_20.startPoint(), SketchLine_17.result())
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_19.result())
+model.do()
+Shell_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_9r"), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_9f"), model.selection("FACE", "Sketch_1/Face-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_10f"), model.selection("FACE", "Sketch_1/Face-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_10r")]
+Shell_1 = model.addShell(Part_1_doc, Shell_1_objects)
+Shell_2_objects = [model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchLine_12f-SketchLine_14f-SketchLine_15f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12f-SketchLine_13f-SketchLine_14f-SketchLine_15r"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_19f-SketchLine_20f"), model.selection("FACE", "Sketch_2/Face-SketchLine_17f-SketchLine_18f-SketchLine_19f-SketchLine_20r")]
+Shell_2 = model.addShell(Part_1_doc, Shell_2_objects)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SHELL", "Shell_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_2_1"), model.selection("SHELL", "Shell_2_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [16])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [32])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Shell_Shell.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Shell_Shell.py
new file mode 100644 (file)
index 0000000..3d2ce89
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Shell_Shell.py
@@ -0,0 +1,87 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-8.703406813627256, 48.70884844011781, -89.26052104208418, 48.70884844011781)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 48.70884844011781, -89.26052104208418, 1.699676379809279)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 1.699676379809279, -8.703406813627256, 1.699676379809279)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-8.703406813627256, 1.699676379809279, -8.703406813627256, 48.70884844011781)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(-50.39879759519037, 48.70884844011781, -49.99398797595192, 1.699676379809278)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(-27.69909819639279, -33.75100200400802, -61.96570844393754, -33.75100200400802)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_2.addLine(-61.96570844393754, -33.75100200400802, -61.96570844393754, 19.31953907815632)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_2.addLine(-61.96570844393754, 19.31953907815632, -27.69909819639279, 19.31953907815632)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchLine_9 = Sketch_2.addLine(-27.69909819639279, 19.31953907815632, -27.69909819639279, -33.75100200400802)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(-61.96570844393754, -12.80210420841683, -27.69909819639279, -13.26763527054108)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_9.result())
+model.do()
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_5r"), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f")])
+Shell_2 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_7r-SketchLine_8r-SketchLine_9r-SketchLine_10f"), model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7r-SketchLine_9r-SketchLine_10r")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SHELL", "Shell_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Face.py b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Face.py
new file mode 100644 (file)
index 0000000..f94339f
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Face.py
@@ -0,0 +1,96 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-8.142167372244474, 30.79863310370742, -42.12686596943888, 30.79863310370742)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-42.12686596943888, 30.79863310370742, -42.12686596943888, -6.018123709919844)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-42.12686596943888, -6.018123709919844, -8.142167372244474, -6.018123709919844)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-8.142167372244474, -6.018123709919844, -8.142167372244474, 30.79863310370742)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(49.91502606462924, 30.79863310370742, 15.22231291332662, 30.79863310370742)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(15.22231291332662, 30.79863310370742, 15.22231291332662, -5.310109155811627)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(15.22231291332662, -5.310109155811627, 49.91502606462924, -5.310109155811627)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(49.91502606462924, -5.310109155811627, 49.91502606462924, 30.79863310370742)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_9 = Sketch_2.addLine(32.99903071986655, 54.47604223124301, -21.74338409862735, 54.47604223124301)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchLine_10 = Sketch_2.addLine(-21.74338409862735, 54.47604223124301, -21.74338409862735, -10.16156298864041)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchLine_11 = Sketch_2.addLine(-21.74338409862735, -10.16156298864041, 32.99903071986655, -10.16156298864041)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(32.99903071986655, -10.16156298864041, 32.99903071986655, 54.47604223124301)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9f-SketchLine_10f-SketchLine_11f-SketchLine_12f")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("COMPOUND", "Compound_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Shell.py b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Shell.py
new file mode 100644 (file)
index 0000000..4f571f1
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_Shell.py
@@ -0,0 +1,102 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-29.34869739478959, 31.37274549098196, -65.37675350701403, 31.37274549098196)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-65.37675350701403, 31.37274549098196, -65.37675350701403, -6.274549098196388)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-65.37675350701403, -6.274549098196388, -29.34869739478959, -6.274549098196388)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-29.34869739478959, -6.274549098196388, -29.34869739478959, 31.37274549098196)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(41.08817635270542, 32.5871743486974, 11.5370741482966, 32.5871743486974)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(11.5370741482966, 32.5871743486974, 11.5370741482966, -8.703406813627252)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(11.5370741482966, -8.703406813627252, 41.08817635270542, -8.703406813627252)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(41.08817635270542, -8.703406813627252, 41.08817635270542, 32.5871743486974)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_9 = Sketch_2.addLine(-36.83851213815001, 4.871192068212162, -37.23534778672252, 23.01200273357838)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchLine_10 = Sketch_2.addLine(-37.23534778672252, 23.01200273357838, -8.095368404429529, 22.8820142517576)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(-8.095368404429529, 22.8820142517576, 20.86605178109317, 22.08563377543123)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchLine_12 = Sketch_2.addLine(20.86605178109317, 22.08563377543123, 22.14286343998464, -2.004860047909258)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_2.addLine(22.14286343998464, -2.004860047909258, -4.857114760245733, -1.198368777231491)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -36.83851213815001, 4.871192068212162)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_14.endPoint())
+SketchLine_15 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -8.095368404429529, 22.8820142517576)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_15.endPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_9r-SketchLine_10r-SketchLine_14r-SketchLine_15f"), model.selection("FACE", "Sketch_2/Face-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_15r")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("COMPOUND", "Compound_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_SolidCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_SolidCompound.py
new file mode 100644 (file)
index 0000000..ec915c1
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_SolidCompound_SolidCompound.py
@@ -0,0 +1,113 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-10.72745490981964, 42.70741482965933, -40.27855711422846, 42.70741482965933)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-40.27855711422846, 42.70741482965933, -40.27855711422846, 9.513026052104207)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-40.27855711422846, 9.513026052104207, -10.72745490981964, 9.513026052104207)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(-10.72745490981964, 9.513026052104207, -10.72745490981964, 42.70741482965933)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(51.61322645290581, 42.70741482965933, 15.98997995991983, 42.70741482965933)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchLine_6 = Sketch_1.addLine(15.98997995991983, 42.70741482965933, 15.98997995991983, 8.298597194388774)
+SketchLine_6.result().setColor(225, 0, 0)
+SketchLine_7 = Sketch_1.addLine(15.98997995991983, 8.298597194388774, 51.61322645290581, 8.298597194388774)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchLine_8 = Sketch_1.addLine(51.61322645290581, 8.298597194388774, 51.61322645290581, 42.70741482965933)
+SketchLine_8.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_9 = Sketch_2.addLine(-17.20440881763527, 19.22845691382766, -33.80160320641282, 19.22845691382766)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchLine_10 = Sketch_2.addLine(-33.80160320641282, 19.22845691382766, -33.80160320641282, -6.679358717434865)
+SketchLine_10.result().setColor(225, 0, 0)
+SketchLine_11 = Sketch_2.addLine(-33.80160320641282, -6.679358717434865, -17.20440881763527, -6.679358717434865)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchLine_12 = Sketch_2.addLine(-17.20440881763527, -6.679358717434865, -17.20440881763527, 19.22845691382766)
+SketchLine_12.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
+SketchLine_13 = Sketch_2.addLine(41.4929859719439, 21.25250501002005, 26.51503006012023, 21.25250501002005)
+SketchLine_13.result().setColor(225, 0, 0)
+SketchLine_14 = Sketch_2.addLine(26.51503006012023, 21.25250501002005, 26.51503006012023, -9.917835671342685)
+SketchLine_14.result().setColor(225, 0, 0)
+SketchLine_15 = Sketch_2.addLine(26.51503006012023, -9.917835671342685, 41.4929859719439, -9.917835671342685)
+SketchLine_15.result().setColor(225, 0, 0)
+SketchLine_16 = Sketch_2.addLine(41.4929859719439, -9.917835671342685, 41.4929859719439, 21.25250501002005)
+SketchLine_16.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_14.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_15.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_16.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 5, 5)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [12])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [48])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [96])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Face.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Face.py
new file mode 100644 (file)
index 0000000..2ae30c0
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Face.py
@@ -0,0 +1,48 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_1.addCircle(-19.01903137581643, 2.528314065029049, 44.55011038017909)
+SketchCircle_1.result().setColor(225, 0, 0)
+SketchCircle_1.results()[1].setColor(225, 0, 0)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")])
+Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), 10)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("SOLID", "Sphere_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [2])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Shell.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Shell.py
new file mode 100644 (file)
index 0000000..26b1908
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Shell.py
@@ -0,0 +1,65 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(35.42084168336675, 22.87174348697394, -27.32464929859721, 22.87174348697394)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-27.32464929859721, 22.87174348697394, -27.32464929859721, -13.08560194713185)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchLine_3 = Sketch_1.addLine(-27.32464929859721, -13.08560194713185, 35.42084168336675, -13.08560194713185)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(35.42084168336675, -13.08560194713185, 35.42084168336675, 22.87174348697394)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(4.250501002003999, 22.87174348697394, 4.250501002003999, -13.08560194713185)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
+model.do()
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_5r"), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f")])
+Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), 10)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SOLID", "Sphere_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [5])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [10])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Solid.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Solid.py
new file mode 100644 (file)
index 0000000..cd4fd2a
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Solid_Solid.py
@@ -0,0 +1,43 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Box_1_1"), model.selection("SOLID", "Cylinder_1_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [5])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [18])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [36])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_VertexCompound_VertexCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_VertexCompound_VertexCompound.py
new file mode 100644 (file)
index 0000000..498ce29
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_VertexCompound_VertexCompound.py
@@ -0,0 +1,53 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchPoint_1 = Sketch_1.addPoint(-28.13426853707415, 23.27655310621242)
+SketchPoint_1.result().setColor(225, 0, 0)
+SketchPoint_2 = Sketch_1.addPoint(10.32264529058116, 23.27655310621242)
+SketchPoint_2.result().setColor(225, 0, 0)
+SketchPoint_3 = Sketch_1.addPoint(47.56513026052106, 23.27655310621242)
+SketchPoint_3.result().setColor(225, 0, 0)
+model.do()
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
+Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("VERTEX", "Vertex_2_1"), model.selection("VERTEX", "Vertex_2_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [1])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Vertex_Vertex.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Vertex_Vertex.py
new file mode 100644 (file)
index 0000000..3bf2a00
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Vertex_Vertex.py
@@ -0,0 +1,66 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchPoint_1 = Sketch_1.addPoint(15.05904629113425, 12.50050543761873)
+SketchPoint_1.result().setColor(225, 0, 0)
+SketchPoint_2 = Sketch_1.addPoint(47.25352258215165, 31.63008715695855)
+SketchPoint_2.result().setColor(225, 0, 0)
+model.do()
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchPoint_3 = Sketch_2.addPoint(15.05904629113425, 12.50050543761873)
+SketchPoint_3.result().setColor(225, 0, 0)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), False)
+SketchPoint_4 = SketchProjection_1.createdFeature()
+SketchPoint_4.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchPoint_4.result())
+model.do()
+Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_3-SketchProjection_1-SketchPoint_4")])
+Vertex_3 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
+Common_2 = model.addCommon(Part_1_doc, [model.selection("VERTEX", "Vertex_2_1"), model.selection("VERTEX", "Vertex_3_1")])
+model.testHaveNamingSubshapes(Common_2, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 0)
+model.testNbSubResults(Common_1, [])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [])
+
+model.testNbResults(Common_2, 1)
+model.testNbSubResults(Common_2, [0])
+model.testNbSubShapes(Common_2, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_2, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_2, GeomAPI_Shape.EDGE, [0])
+model.testNbSubShapes(Common_2, GeomAPI_Shape.VERTEX, [1])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_WireCompound_WireCompound.py b/src/FeaturesPlugin/Test/TestBooleanCommon_WireCompound_WireCompound.py
new file mode 100644 (file)
index 0000000..b8c8d50
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_WireCompound_WireCompound.py
@@ -0,0 +1,91 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-88.6588483815807, 35.68247765805569, -60.62456998069012, -7.998839850308682)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-60.62456998069012, -7.998839850308682, -33.24225154261096, 37.63835754648991)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(22.82630525917019, 37.63835754648991, 47.60078384600371, -9.954719738742909)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchLine_4 = Sketch_1.addLine(47.60078384600371, -9.954719738742909, 74.33114232127146, 36.3344376208671)
+SketchLine_4.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_5 = Sketch_2.addLine(-75.23467769579756, 14.76574658950986, -60.62456998069012, -7.998839850308684)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
+SketchLine_6 = SketchProjection_1.createdFeature()
+SketchLine_6.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_6.result())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_6).endPoint(), SketchLine_5.endPoint())
+SketchLine_7 = Sketch_2.addLine(-60.62456998069012, -7.998839850308684, -47.51524103341781, 13.8500417284785)
+SketchLine_7.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
+SketchLine_8 = SketchProjection_2.createdFeature()
+SketchLine_8.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
+SketchLine_9 = Sketch_2.addLine(35.74952364371219, 12.81217486039606, 47.60078384600371, -9.954719738742909)
+SketchLine_9.result().setColor(225, 0, 0)
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), False)
+SketchLine_10 = SketchProjection_3.createdFeature()
+SketchLine_10.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_10.result())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_10).endPoint(), SketchLine_9.endPoint())
+SketchLine_11 = Sketch_2.addLine(47.60078384600371, -9.954719738742909, 64.13719888777418, 18.68151118724985)
+SketchLine_11.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_11.startPoint())
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
+SketchLine_12 = SketchProjection_4.createdFeature()
+SketchLine_12.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.result())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
+Wire_3 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_7")])
+Wire_4 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_11")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("WIRE", "Wire_1_1"), model.selection("WIRE", "Wire_2_1")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("WIRE", "Wire_3_1"), model.selection("WIRE", "Wire_4_1")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/TestBooleanCommon_Wire_Wire.py b/src/FeaturesPlugin/Test/TestBooleanCommon_Wire_Wire.py
new file mode 100644 (file)
index 0000000..41da101
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanCommon_Wire_Wire.py
@@ -0,0 +1,68 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-44.32557091040492, 34.37855773243287, -1.296213364851963, -18.43019925529121)
+SketchLine_1.result().setColor(225, 0, 0)
+SketchLine_2 = Sketch_1.addLine(-1.296213364851963, -18.43019925529121, 39.1253043294554, 29.81483799275304)
+SketchLine_2.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_3 = Sketch_2.addLine(-15.313984501828, -1.226571041729713, -1.296213364851965, -18.43019925529121)
+SketchLine_3.result().setColor(225, 0, 0)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
+SketchLine_4 = SketchProjection_1.createdFeature()
+SketchLine_4.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_4).endPoint(), SketchLine_3.endPoint())
+SketchLine_5 = Sketch_2.addLine(-1.296213364851965, -18.43019925529121, 20.70651786493702, 7.831125115747244)
+SketchLine_5.result().setColor(225, 0, 0)
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_5.startPoint())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
+SketchLine_6 = SketchProjection_2.createdFeature()
+SketchLine_6.result().setColor(170, 0, 225)
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_5")])
+Common_1 = model.addCommon(Part_1_doc, [model.selection("WIRE", "Wire_1_1"), model.selection("WIRE", "Wire_2_1")])
+model.testHaveNamingSubshapes(Common_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Common_1, 1)
+model.testNbSubResults(Common_1, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.EDGE, [2])
+model.testNbSubShapes(Common_1, GeomAPI_Shape.VERTEX, [4])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/Test/_Test2394.py b/src/FeaturesPlugin/Test/_Test2394.py
new file mode 100644 (file)
index 0000000..13639bb
--- /dev/null
+++ b/src/FeaturesPlugin/Test/_Test2394.py
@@ -0,0 +1,258 @@
+# -*- coding: utf-8 -*-
+
+## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from GeomAPI import *
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+model.addParameter(Part_1_doc, "R", "58")
+model.addParameter(Part_1_doc, "cote_cube", "R/2")
+model.addParameter(Part_1_doc, "theta", "54")
+model.addParameter(Part_1_doc, "phi", "36")
+model.addParameter(Part_1_doc, "pi", "3.141592653589793")
+model.addParameter(Part_1_doc, "x", "R*sin(phi/180*pi)*cos(theta/180*pi)")
+model.addParameter(Part_1_doc, "y", "R*sin(phi/180*pi)*sin(theta/180*pi)")
+model.addParameter(Part_1_doc, "z", "R*cos(phi/180*pi)")
+model.addParameter(Part_1_doc, "haut_ext_tuyau", "5")
+model.addParameter(Part_1_doc, "haut_int_tuyau", "14")
+Param_Diam = model.addParameter(Part_1_doc, "diam_tuyau", "10")
+
+Revolution_1 = model.addRevolution(Part_1_doc, [], model.selection("EDGE", "PartSet/OZ"), 90, 0)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 58, 0, 0, -58, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
+SketchLine_2 = Sketch_1.addLine(0, -58, 0, 0)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.endPoint())
+SketchLine_3 = Sketch_1.addLine(0, 0, 58, 0)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), "R")
+Revolution_1.setNestedSketch(Sketch_1)
+
+Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 0, "cote_cube")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2"))
+SketchLine_4 = Sketch_2.addLine(29, 0, 0, 0)
+SketchLine_5 = Sketch_2.addLine(0, 0, 0, 29)
+SketchLine_6 = Sketch_2.addLine(0, 29, 29, 29)
+SketchLine_7 = Sketch_2.addLine(29, 29, 29, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_4.result())
+SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_5.result())
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_6.result(), "cote_cube")
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_6.result(), SketchLine_7.result())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/To_Face_1"), False)
+SketchLine_8 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_8.result())
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/From_Face_1"), False)
+SketchLine_9 = SketchProjection_4.createdFeature()
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.result())
+Extrusion_1.setNestedSketch(Sketch_2)
+
+Fill_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1")])
+
+Point_2 = model.addPoint(Part_1_doc, "x", "y", "-z")
+Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Fill_1_1_2/Modified_Face_3&Fill_1_1_2/Modified_Face_2&Fill_1_1_2/Modified_Face_1"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Point_1"), True)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "haut_ext_tuyau", True)
+Plane_5.result().setName("Plane_2 arrivee tuyau")
+Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), 45)
+Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"), 45)
+Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"), "90+45")
+
+Fill_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_1_1_1")], [model.selection("FACE", "Plane_5")])
+Fill_3 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_2_1_2")], [model.selection("FACE", "Plane_3")])
+Fill_4 = model.addFill(Part_1_doc, [model.selection("SOLID", "Fill_3_1_2")], [model.selection("FACE", "Plane_4")])
+Fill_4.result().setColor(102, 51, 51)
+Fill_4.result().subResult(0).setColor(153, 153, 76)
+Fill_4.result().subResult(1).setColor(0, 204, 204)
+Fill_4.result().subResult(2).setColor(51, 51, 102)
+Fill_4.result().subResult(3).setColor(102, 204, 102)
+Fill_4.result().subResult(4).setColor(204, 204, 0)
+
+Union_1 = model.addUnion(Part_1_doc, [model.selection("SOLID", "Fill_4_1_4"), model.selection("SOLID", "Fill_4_1_2")])
+
+Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("FACE", "Plane_2 arrivee tuyau"))
+
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2 arrivee tuyau"))
+SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Point_2"), False)
+SketchPoint_2 = SketchProjection_5.createdFeature()
+SketchCircle_1 = Sketch_3.addCircle(0, 0, 10)
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
+SketchConstraintRadius_1 = Sketch_3.setRadius(SketchCircle_1.results()[1], "diam_tuyau")
+SketchLine_10 = Sketch_3.addLine(-5, 5, 5, 5)
+SketchLine_11 = Sketch_3.addLine(5, 5, 5, -5)
+SketchLine_12 = Sketch_3.addLine(5, -5, -5, -5)
+SketchLine_13 = Sketch_3.addLine(-5, -5, -5, 5)
+SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_10.result())
+SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_11.result())
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_12.result())
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_13.result())
+SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_10.result(), SketchLine_13.result())
+SketchLine_14 = Sketch_3.addLine(5, 5, 7.071067811865479, 7.071067811865475)
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchCircle_1.results()[1])
+SketchLine_15 = Sketch_3.addLine(-5, -5, -7.071067811865472, -7.071067811865476)
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchCircle_1.results()[1])
+SketchConstraintCollinear_1 = Sketch_3.setCollinear(SketchLine_14.result(), SketchLine_15.result())
+SketchLine_16 = Sketch_3.addLine(7.071067811865478, -7.071067811865476, 5, -5)
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_16.endPoint())
+SketchLine_17 = Sketch_3.addLine(-5, 5, -7.071067811865472, 7.071067811865476)
+SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_10.startPoint(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchCircle_1.results()[1])
+SketchConstraintCollinear_2 = Sketch_3.setCollinear(SketchLine_17.result(), SketchLine_16.result())
+SketchConstraintEqual_3 = Sketch_3.setEqual(SketchLine_14.result(), SketchLine_15.result())
+SketchConstraintEqual_4 = Sketch_3.setEqual(SketchLine_17.result(), SketchLine_16.result())
+SketchConstraintLength_3 = Sketch_3.setLength(SketchLine_10.result(), "diam_tuyau")
+model.do()
+
+Extrusion_2_objects = [model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_11f-SketchLine_14r-SketchLine_16r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_10f-SketchLine_14f-SketchLine_17r"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_13f-SketchLine_15r-SketchLine_17f"), model.selection("FACE", "Sketch_3/Face-SketchCircle_1_2f-SketchLine_12f-SketchLine_15f-SketchLine_16f")]
+Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), 10, 0)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_13r")], model.selection(), "haut_int_tuyau", 0)
+
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_3"))
+SketchProjection_6 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), False)
+SketchPoint_3 = SketchProjection_6.createdFeature()
+SketchProjection_7 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), False)
+SketchPoint_4 = SketchProjection_7.createdFeature()
+SketchArc_2 = Sketch_4.addArc(0, 0, -7.071067811865476, -7.071067811865472, 7.071067811865476, 7.071067811865472, True)
+SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchPoint_3.result(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchArc_2.results()[1])
+SketchLine_18 = Sketch_4.addLine(7.071067811865476, 7.071067811865472, -7.071067811865476, -7.071067811865472)
+SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchAPI_Point(SketchPoint_3).coordinates(), SketchLine_18.endPoint())
+SketchProjection_8 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), False)
+SketchPoint_5 = SketchProjection_8.createdFeature()
+SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchArc_2.endPoint(), SketchAPI_Point(SketchPoint_5).coordinates())
+model.do()
+
+Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_2_2f-SketchLine_18r")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_18"), 0, 180)
+
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
+Cut_1.result().setName("demi-sphere")
+
+Plane_9 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/From_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_10&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_10&Extrusion_2_1/To_Face_4"))
+Plane_10 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_12&Extrusion_2_1/Generated_Face_11&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_13&Extrusion_2_1/Generated_Face_12&Extrusion_2_1/From_Face_1"))
+Plane_11 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_3"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_7&Extrusion_2_1/From_Face_3"))
+Plane_12 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/To_Face_4"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_4&Extrusion_2_1/From_Face_4"))
+
+Recover_1 = model.addRecover(Part_1_doc, Cut_1, [Extrusion_3.result()])
+
+Plane_13 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape4"), model.selection("EDGE", "Recover_1_1/Shape4&Recover_1_1/Shape6"), "90+45")
+Plane_14 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape1"), model.selection("EDGE", "Recover_1_1/Shape1&Recover_1_1/Shape6"), "90+45")
+Plane_15 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape2"), model.selection("EDGE", "Recover_1_1/Shape2&Recover_1_1/Shape6"), "90+45")
+Plane_16 = model.addPlane(Part_1_doc, model.selection("FACE", "Recover_1_1/Shape6"), model.selection("EDGE", "Recover_1_1/Shape3&Recover_1_1/Shape6"), 45)
+
+Fill_5_objects_2 = [model.selection("FACE", "Plane_6"), model.selection("FACE", "Plane_7"), model.selection("FACE", "Plane_8"), model.selection("FACE", "Plane_9"), model.selection("FACE", "Plane_10"), model.selection("FACE", "Plane_11"), model.selection("FACE", "Plane_12"), model.selection("FACE", "Plane_13")]
+Fill_5 = model.addFill(Part_1_doc, [model.selection("SOLID", "demi-sphere")], Fill_5_objects_2)
+
+Union_2_objects = [model.selection("SOLID", "Fill_5_1_14"), model.selection("SOLID", "Fill_5_1_15"), model.selection("SOLID", "Fill_5_1_16")]
+Union_2 = model.addUnion(Part_1_doc, Union_2_objects)
+Union_3_objects = [model.selection("SOLID", "Fill_5_1_8/Fill_5_1_8"), model.selection("SOLID", "Fill_5_1_4/Fill_5_1_4"), model.selection("SOLID", "Fill_5_1_9/Fill_5_1_9"), model.selection("SOLID", "Fill_5_1_11/Fill_5_1_11")]
+Union_3 = model.addUnion(Part_1_doc, Union_3_objects)
+Union_4_objects = [model.selection("SOLID", "Fill_5_1_6/Fill_5_1_6"), model.selection("SOLID", "Fill_5_1_10/Fill_5_1_10"), model.selection("SOLID", "Fill_5_1_13/Fill_5_1_13")]
+Union_4 = model.addUnion(Part_1_doc, Union_4_objects)
+Union_5_objects = [model.selection("SOLID", "Fill_5_1_2/Fill_5_1_2"), model.selection("SOLID", "Fill_5_1_1/Fill_5_1_1"), model.selection("SOLID", "Fill_5_1_3/Fill_5_1_3")]
+Union_5 = model.addUnion(Part_1_doc, Union_5_objects)
+Union_6_objects = [model.selection("SOLID", "Fill_5_1_5/Fill_5_1_5"), model.selection("SOLID", "Fill_5_1_7/Fill_5_1_7"), model.selection("SOLID", "Fill_5_1_12/Fill_5_1_12")]
+Union_6 = model.addUnion(Part_1_doc, Union_6_objects)
+Union_6.result().setColor(0, 0, 204)
+Union_6.result().subResult(0).setColor(204, 102, 102)
+Union_6.result().subResult(1).setColor(127, 254, 127)
+Union_6.result().subResult(2).setColor(102, 51, 102)
+Union_6.result().subResult(3).setColor(76, 76, 153)
+Union_6.result().subResult(4).setColor(0, 0, 254)
+
+Partition_1_objects = [model.selection("SOLID", "Recover_1_1"), model.selection("COMPSOLID", "Union_1_1"), model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "demi-sphere")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
+Partition_1.result().setColor(102, 0, 0)
+Partition_1.result().subResult(0).setColor(255, 255, 0)
+Partition_1.result().subResult(1).setColor(0, 254, 0)
+Partition_1.result().subResult(2).setColor(0, 255, 255)
+Partition_1.result().subResult(3).setColor(255, 85, 0)
+Partition_1.result().subResult(4).setColor(153, 0, 0)
+Partition_1.result().subResult(5).setColor(254, 0, 254)
+Partition_1.result().subResult(6).setColor(127, 127, 254)
+Partition_1.result().subResult(7).setColor(102, 204, 102)
+Partition_1.result().subResult(8).setColor(127, 254, 127)
+Partition_1.result().subResult(9).setColor(153, 153, 76)
+Partition_1.result().subResult(10).setColor(204, 102, 102)
+Partition_1.result().subResult(11).setColor(127, 254, 254)
+Partition_1.result().subResult(12).setColor(255, 255, 0)
+Partition_1.result().subResult(13).setColor(102, 51, 102)
+Partition_1.result().subResult(14).setColor(102, 204, 204)
+Partition_1.result().subResult(15).setColor(254, 127, 254)
+Partition_1.result().subResult(16).setColor(153, 153, 0)
+Partition_1.result().subResult(17).setColor(153, 153, 0)
+Partition_1.result().subResult(18).setColor(204, 0, 204)
+
+Folder_1 = model.addFolder(Part_1_doc, Revolution_1, Union_1)
+Folder_2 = model.addFolder(Part_1_doc, Point_3, Union_6)
+model.do()
+
+# check the result
+model.testNbResults(Partition_1, 1)
+model.testNbSubResults(Partition_1, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [199])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [814])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1628])
+model.testResultsVolumes(Partition_1, [103867.289635450288187712430953979])
+
+# change parameter and check validity of the result
+Param_Diam.setValue(8)
+model.do()
+
+model.testNbResults(Partition_1, 1)
+model.testNbSubResults(Partition_1, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [19])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [191])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [744])
+model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1488])
+model.testResultsVolumes(Partition_1, [103221.354557478349306620657444])
+
+model.end()
+
+#assert(model.checkPythonDump())