diff -Naur netgen-4.9.13_orig/libsrc/meshing/meshtype.cpp netgen-4.9.13_new/libsrc/meshing/meshtype.cpp
--- netgen-4.9.13_orig/libsrc/meshing/meshtype.cpp 2009-09-13 14:28:38.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/meshing/meshtype.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/meshing/meshtype.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -1,4 +1,5 @@
#include <mystdlib.h>
+#include <float.h> // to get DBL_MIN defined
blockfill = 1;
diff -Naur netgen-4.9.13_orig/libsrc/meshing/meshtype.hpp netgen-4.9.13_new/libsrc/meshing/meshtype.hpp
--- netgen-4.9.13_orig/libsrc/meshing/meshtype.hpp 2009-11-09 13:50:43.000000000 +0300
-+++ netgen-4.9.13_new/libsrc/meshing/meshtype.hpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/meshing/meshtype.hpp 2011-12-20 14:50:26.000000000 +0400
@@ -12,6 +12,7 @@
Classes for NETGEN
*/
SEGMENT = 1, SEGMENT3 = 2,
diff -Naur netgen-4.9.13_orig/libsrc/meshing/smoothing2.cpp netgen-4.9.13_new/libsrc/meshing/smoothing2.cpp
--- netgen-4.9.13_orig/libsrc/meshing/smoothing2.cpp 2009-11-09 13:47:09.000000000 +0300
-+++ netgen-4.9.13_new/libsrc/meshing/smoothing2.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/meshing/smoothing2.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -302,7 +302,8 @@
vgrad = 0;
badness = 0;
}
}
-diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Inter3d.cxx netgen-4.9.13_new/libsrc/occ/Partition_Inter3d.cxx
---- netgen-4.9.13_orig/libsrc/occ/Partition_Inter3d.cxx 2009-08-24 06:12:24.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/Partition_Inter3d.cxx 2014-01-15 13:59:16.000000000 +0400
-@@ -86,6 +86,9 @@
- #include <TopOpeBRepTool_OutCurveType.hxx>
- #include <TopOpeBRep_DSFiller.hxx>
- #include <TopTools_DataMapIteratorOfDataMapOfShapeShape.hxx>
-+
-+#include <Standard_Version.hxx>
-+
- #include <stdio.h>
-
- //=======================================================================
-@@ -243,7 +246,12 @@
- Standard_Integer i, nbExt = anExtPS.NbExt();
- Extrema_POnSurf aPOnSurf;
- for (i = 1; i <= nbExt; ++i )
-+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
-+// porting to OCCT6.5.1
-+ if (anExtPS.SquareDistance( i ) <= TolE * TolE) {
-+#else
- if (anExtPS.Value( i ) <= TolE) {
-+#endif
- aPOnSurf = anExtPS.Point( i );
- break;
- }
-diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Loop.cxx netgen-4.9.13_new/libsrc/occ/Partition_Loop.cxx
---- netgen-4.9.13_orig/libsrc/occ/Partition_Loop.cxx 2009-08-24 06:12:24.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/Partition_Loop.cxx 2014-01-15 13:59:16.000000000 +0400
-@@ -178,7 +178,7 @@
- }
- }
-
-- Standard_Real anglemax = - PI;
-+ Standard_Real anglemax = - M_PI;
- TopoDS_Edge SelectedEdge;
- for ( itl.Initialize(LE); itl.More(); itl.Next()) {
- const TopoDS_Edge& E = TopoDS::Edge(itl.Value());
-diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Loop2d.cxx netgen-4.9.13_new/libsrc/occ/Partition_Loop2d.cxx
---- netgen-4.9.13_orig/libsrc/occ/Partition_Loop2d.cxx 2009-08-24 06:12:24.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/Partition_Loop2d.cxx 2014-01-15 13:59:16.000000000 +0400
-@@ -22,7 +22,6 @@
- #include <BRepAdaptor_Surface.hxx>
- #include <BRepAlgo_AsDes.hxx>
- #include <BRepAlgo_FaceRestrictor.hxx>
--#include <BRepOffset_DataMapOfShapeReal.hxx>
- #include <BRepTopAdaptor_FClass2d.hxx>
- #include <BRep_Builder.hxx>
- #include <BRep_Tool.hxx>
-@@ -51,6 +50,15 @@
- #include <gp_Pnt.hxx>
- #include <gp_Pnt2d.hxx>
-
-+#include <Standard_Version.hxx>
-+
-+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
-+// porting to OCCT6.5.1
-+#include <TopTools_DataMapOfShapeReal.hxx>
-+#else
-+#include <BRepOffset_DataMapOfShapeReal.hxx>
-+#endif
-+
- //=======================================================================
- //function : Partition_Loop2d
- //purpose :
-@@ -209,7 +217,7 @@
- Cc->D1(uc, PC, CTg1);
- if (!isForward) CTg1.Reverse();
-
-- Standard_Real anglemin = 3 * PI, tolAng = 1.e-8;
-+ Standard_Real anglemin = 3 * M_PI, tolAng = 1.e-8;
-
- // select an edge whose first derivative is most left of CTg1
- // ie an angle between Tg1 and CTg1 is least
-@@ -233,7 +241,7 @@
- // -PI < angle < PI
- Standard_Real angle = Tg1.Angle(CTg1);
-
-- if (PI - Abs(angle) <= tolAng)
-+ if (M_PI - Abs(angle) <= tolAng)
- {
- // an angle is too close to PI; assure that an angle sign really
- // reflects an edge position: +PI - an edge is worst,
-@@ -519,7 +527,12 @@
- DC.Initialize( DegEdge, F );
-
- // avoid intersecting twice the same edge
-+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
-+// porting to OCCT6.5.1
-+ TopTools_DataMapOfShapeReal EUMap ( EdgesList.Extent() );
-+#else
- BRepOffset_DataMapOfShapeReal EUMap ( EdgesList.Extent() );
-+#endif
-
- Standard_Real U, f, l;
- BRep_Tool::Range (DegEdge, f, l);
-diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Spliter.cxx netgen-4.9.13_new/libsrc/occ/Partition_Spliter.cxx
---- netgen-4.9.13_orig/libsrc/occ/Partition_Spliter.cxx 2009-08-24 06:12:24.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/Partition_Spliter.cxx 2014-01-15 13:59:16.000000000 +0400
-@@ -79,6 +79,8 @@
- #include <GeomAdaptor_Curve.hxx>
- #include <TopOpeBRepTool_CurveTool.hxx>
-
-+#include <Standard_Version.hxx>
-+
- #ifdef DEB
- //# define PART_PERF
- #endif
-@@ -1169,7 +1171,12 @@
- for (; j<=nbj && ok; ++j) {
- if (Extrema.IsMin(j)) {
- hasMin = Standard_True;
-+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
-+// porting to OCCT6.5.1
-+ ok = Extrema.SquareDistance(j) <= tol * tol;
-+#else
- ok = Extrema.Value(j) <= tol;
-+#endif
- }
- }
- }
diff -Naur netgen-4.9.13_orig/libsrc/occ/occconstruction.cpp netgen-4.9.13_new/libsrc/occ/occconstruction.cpp
--- netgen-4.9.13_orig/libsrc/occ/occconstruction.cpp 2009-08-24 06:32:47.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/occconstruction.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/occconstruction.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -28,7 +28,7 @@
#include <BRepAlgoAPI_Common.hxx>
#include <BRepAlgoAPI_Fuse.hxx>
#include <BRepOffsetAPI_MakeOffsetShape.hxx>
#include <ShapeFix_Shape.hxx>
diff -Naur netgen-4.9.13_orig/libsrc/occ/occgenmesh.cpp netgen-4.9.13_new/libsrc/occ/occgenmesh.cpp
---- netgen-4.9.13_orig/libsrc/occ/occgenmesh.cpp 2010-03-16 09:30:07.000000000 +0300
-+++ netgen-4.9.13_new/libsrc/occ/occgenmesh.cpp 2014-01-15 13:59:16.000000000 +0400
+--- netgen-4.9.13_orig/libsrc/occ/occgenmesh.cpp 2011-12-20 14:50:26.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/occgenmesh.cpp 2014-02-05 20:16:34.000000000 +0400
@@ -15,6 +15,8 @@
#define DIVIDEEDGESECTIONS 1000
pnt = c->Value(params[i]);
ps[i-1] = MeshPoint (Point3d(pnt.X(), pnt.Y(), pnt.Z()));
i++;
-@@ -323,6 +336,7 @@
+@@ -323,6 +336,9 @@
(*testout) << "nedges = " << nedges << endl;
double eps = 1e-6 * geom.GetBoundingBox().Diam();
+ const double eps2 = eps * eps; // -- small optimization
++
++ int first_vp = mesh.GetNP()+1; // -- to support SALOME sub-meshes
for (int i = 1; i <= nvertices; i++)
{
-@@ -332,7 +346,8 @@
+@@ -332,7 +348,8 @@
bool exists = 0;
if (merge_solids)
for (PointIndex pi = 1; pi <= mesh.GetNP(); pi++)
{
exists = 1;
break;
-@@ -362,6 +377,7 @@
+@@ -362,6 +379,7 @@
{
TopoDS_Face face = TopoDS::Face(exp1.Current());
int facenr = geom.fmap.FindIndex(face);
if (face2solid[0][facenr-1] == 0)
face2solid[0][facenr-1] = solidnr;
-@@ -381,6 +397,7 @@
+@@ -381,6 +399,7 @@
int facenr = 0;
int edgenr = 0;
(*testout) << "faces = " << geom.fmap.Extent() << endl;
int curr = 0;
-@@ -442,6 +459,7 @@
+@@ -442,6 +461,7 @@
//(*testout) << "ignoring degenerated edge" << endl;
continue;
}
if (geom.vmap.FindIndex(TopExp::FirstVertex (edge)) ==
geom.vmap.FindIndex(TopExp::LastVertex (edge)))
-@@ -479,15 +497,64 @@
+@@ -474,20 +494,104 @@
+
+ if (!merge_solids)
+ {
+- pnums[0] = geom.vmap.FindIndex (TopExp::FirstVertex (edge));
+- pnums[pnums.Size()-1] = geom.vmap.FindIndex (TopExp::LastVertex (edge));
++ //pnums[0] = geom.vmap.FindIndex (TopExp::FirstVertex (edge));
++ //pnums[pnums.Size()-1] = geom.vmap.FindIndex (TopExp::LastVertex (edge));
++ MeshPoint dfltP ( Point<3> ( 0, 0, 0 ) );
++ int *ipp[] = { &pnums[0], &pnums[pnums.Size()-1] };
++ TopoDS_Iterator vIt( edge, false );
++ TopoDS_Vertex v[2];
++ v[0] = TopoDS::Vertex( vIt.Value() ); vIt.Next();
++ v[1] = TopoDS::Vertex( vIt.Value() );
++ if ( v[0].Orientation() == TopAbs_REVERSED )
++ std::swap( v[0], v[1] );
++ for ( int i = 0; i < 2; ++i)
++ {
++ int &ip = *ipp[i];
++ ip = geom.vmap.FindIndex ( v[i] );
++ if ( ip == 0 || ip > nvertices )
++ {
++ int iv = ip;
++ if ( ip == 0 )
++ ip = iv = geom.vmap.Add( v[i] );
++ gp_Pnt pnt = BRep_Tool::Pnt( v[i] );
++ MeshPoint mp( Point<3>(pnt.X(), pnt.Y(), pnt.Z()) );
++ for (PointIndex pi = 1; pi < first_vp; pi++)
++ if ( Dist2 (mesh.Point(pi), Point<3>(mp)) < 1e-100 )
++ {
++ ip = pi;
++ if ( mesh.Point(ip).GetLayer() != dfltP.GetLayer() && mesh.Point(ip).GetLayer() != iv )
++ continue;
++ if ( mesh.Point(ip).GetLayer() == dfltP.GetLayer())
++ mesh.Point(ip) = MeshPoint( mesh.Point(ip), iv );
++ break;
++ }
++ }
++ else
++ {
++ ip += first_vp - 1;
++ }
++ }
}
else
{
}
}
-@@ -497,17 +564,20 @@
+@@ -497,17 +601,20 @@
bool exists = 0;
int j;
for (j = first_ep; j <= mesh.GetNP(); j++)
(*testout) << "add meshpoint " << mp[i-1] << endl;
pnums[i] = mesh.GetNP();
}
-@@ -591,6 +661,8 @@
+@@ -591,6 +698,8 @@
// (*testout) << "edge " << mesh.LineSegment(i).edgenr << " face " << mesh.LineSegment(i).si
// << " p1 " << mesh.LineSegment(i)[0] << " p2 " << mesh.LineSegment(i)[1] << endl;
// exit(10);
mesh.CalcSurfacesOfNode();
multithread.task = savetask;
-@@ -633,7 +705,8 @@
+@@ -633,7 +742,8 @@
}
(*testout) << "mesh face " << k << endl;
geom.facemeshstatus[k-1] = -1;
-@@ -901,7 +974,8 @@
+@@ -901,7 +1011,8 @@
// if (k != 36) continue;
// (*testout) << "optimize face " << k << endl;
FaceDescriptor & fd = mesh.GetFaceDescriptor(k);
-@@ -1456,3 +1530,4 @@
+@@ -1456,3 +1567,4 @@
}
#endif
+
diff -Naur netgen-4.9.13_orig/libsrc/occ/occgeom.cpp netgen-4.9.13_new/libsrc/occ/occgeom.cpp
--- netgen-4.9.13_orig/libsrc/occ/occgeom.cpp 2010-03-05 16:16:21.000000000 +0300
-+++ netgen-4.9.13_new/libsrc/occ/occgeom.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/occgeom.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -8,6 +8,8 @@
#include "ShapeAnalysis_CheckSmallFace.hxx"
#include "ShapeAnalysis_DataMapOfShapeListOfReal.hxx"
}
diff -Naur netgen-4.9.13_orig/libsrc/occ/occgeom.hpp netgen-4.9.13_new/libsrc/occ/occgeom.hpp
--- netgen-4.9.13_orig/libsrc/occ/occgeom.hpp 2010-01-14 19:56:19.000000000 +0300
-+++ netgen-4.9.13_new/libsrc/occ/occgeom.hpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/occgeom.hpp 2011-12-20 14:50:26.000000000 +0400
@@ -15,8 +15,8 @@
#include "Geom_Curve.hxx"
#include "Geom2d_Curve.hxx"
cout << "OCCGeometry::GetSurface using PLANESPACE" << endl;
diff -Naur netgen-4.9.13_orig/libsrc/occ/occmeshsurf.cpp netgen-4.9.13_new/libsrc/occ/occmeshsurf.cpp
--- netgen-4.9.13_orig/libsrc/occ/occmeshsurf.cpp 2009-08-24 06:32:47.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/occmeshsurf.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/occmeshsurf.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -6,6 +6,7 @@
#include <meshing.hpp>
#include <GeomLProp_SLProps.hxx>
+diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Inter3d.cxx netgen-4.9.13_new/libsrc/occ/Partition_Inter3d.cxx
+--- netgen-4.9.13_orig/libsrc/occ/Partition_Inter3d.cxx 2009-08-24 06:12:24.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/Partition_Inter3d.cxx 2011-12-20 14:50:26.000000000 +0400
+@@ -86,6 +86,9 @@
+ #include <TopOpeBRepTool_OutCurveType.hxx>
+ #include <TopOpeBRep_DSFiller.hxx>
+ #include <TopTools_DataMapIteratorOfDataMapOfShapeShape.hxx>
++
++#include <Standard_Version.hxx>
++
+ #include <stdio.h>
+
+ //=======================================================================
+@@ -243,7 +246,12 @@
+ Standard_Integer i, nbExt = anExtPS.NbExt();
+ Extrema_POnSurf aPOnSurf;
+ for (i = 1; i <= nbExt; ++i )
++#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
++// porting to OCCT6.5.1
++ if (anExtPS.SquareDistance( i ) <= TolE * TolE) {
++#else
+ if (anExtPS.Value( i ) <= TolE) {
++#endif
+ aPOnSurf = anExtPS.Point( i );
+ break;
+ }
+diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Loop2d.cxx netgen-4.9.13_new/libsrc/occ/Partition_Loop2d.cxx
+--- netgen-4.9.13_orig/libsrc/occ/Partition_Loop2d.cxx 2009-08-24 06:12:24.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/Partition_Loop2d.cxx 2011-12-20 14:53:39.000000000 +0400
+@@ -22,7 +22,6 @@
+ #include <BRepAdaptor_Surface.hxx>
+ #include <BRepAlgo_AsDes.hxx>
+ #include <BRepAlgo_FaceRestrictor.hxx>
+-#include <BRepOffset_DataMapOfShapeReal.hxx>
+ #include <BRepTopAdaptor_FClass2d.hxx>
+ #include <BRep_Builder.hxx>
+ #include <BRep_Tool.hxx>
+@@ -51,6 +50,15 @@
+ #include <gp_Pnt.hxx>
+ #include <gp_Pnt2d.hxx>
+
++#include <Standard_Version.hxx>
++
++#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
++// porting to OCCT6.5.1
++#include <TopTools_DataMapOfShapeReal.hxx>
++#else
++#include <BRepOffset_DataMapOfShapeReal.hxx>
++#endif
++
+ //=======================================================================
+ //function : Partition_Loop2d
+ //purpose :
+@@ -209,7 +217,7 @@
+ Cc->D1(uc, PC, CTg1);
+ if (!isForward) CTg1.Reverse();
+
+- Standard_Real anglemin = 3 * PI, tolAng = 1.e-8;
++ Standard_Real anglemin = 3 * M_PI, tolAng = 1.e-8;
+
+ // select an edge whose first derivative is most left of CTg1
+ // ie an angle between Tg1 and CTg1 is least
+@@ -233,7 +241,7 @@
+ // -PI < angle < PI
+ Standard_Real angle = Tg1.Angle(CTg1);
+
+- if (PI - Abs(angle) <= tolAng)
++ if (M_PI - Abs(angle) <= tolAng)
+ {
+ // an angle is too close to PI; assure that an angle sign really
+ // reflects an edge position: +PI - an edge is worst,
+@@ -519,7 +527,12 @@
+ DC.Initialize( DegEdge, F );
+
+ // avoid intersecting twice the same edge
++#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
++// porting to OCCT6.5.1
++ TopTools_DataMapOfShapeReal EUMap ( EdgesList.Extent() );
++#else
+ BRepOffset_DataMapOfShapeReal EUMap ( EdgesList.Extent() );
++#endif
+
+ Standard_Real U, f, l;
+ BRep_Tool::Range (DegEdge, f, l);
+diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Loop.cxx netgen-4.9.13_new/libsrc/occ/Partition_Loop.cxx
+--- netgen-4.9.13_orig/libsrc/occ/Partition_Loop.cxx 2009-08-24 06:12:24.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/Partition_Loop.cxx 2011-12-20 14:53:05.000000000 +0400
+@@ -178,7 +178,7 @@
+ }
+ }
+
+- Standard_Real anglemax = - PI;
++ Standard_Real anglemax = - M_PI;
+ TopoDS_Edge SelectedEdge;
+ for ( itl.Initialize(LE); itl.More(); itl.Next()) {
+ const TopoDS_Edge& E = TopoDS::Edge(itl.Value());
+diff -Naur netgen-4.9.13_orig/libsrc/occ/Partition_Spliter.cxx netgen-4.9.13_new/libsrc/occ/Partition_Spliter.cxx
+--- netgen-4.9.13_orig/libsrc/occ/Partition_Spliter.cxx 2009-08-24 06:12:24.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/Partition_Spliter.cxx 2011-12-20 14:50:26.000000000 +0400
+@@ -79,6 +79,8 @@
+ #include <GeomAdaptor_Curve.hxx>
+ #include <TopOpeBRepTool_CurveTool.hxx>
+
++#include <Standard_Version.hxx>
++
+ #ifdef DEB
+ //# define PART_PERF
+ #endif
+@@ -1169,7 +1171,12 @@
+ for (; j<=nbj && ok; ++j) {
+ if (Extrema.IsMin(j)) {
+ hasMin = Standard_True;
++#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060400
++// porting to OCCT6.5.1
++ ok = Extrema.SquareDistance(j) <= tol * tol;
++#else
+ ok = Extrema.Value(j) <= tol;
++#endif
+ }
+ }
+ }
diff -Naur netgen-4.9.13_orig/libsrc/occ/utilities.h netgen-4.9.13_new/libsrc/occ/utilities.h
--- netgen-4.9.13_orig/libsrc/occ/utilities.h 2009-08-24 06:12:24.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/occ/utilities.h 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/occ/utilities.h 2011-12-20 14:50:26.000000000 +0400
@@ -33,6 +33,7 @@
#include <string>
diff -Naur netgen-4.9.13_orig/libsrc/stlgeom/stlgeommesh.cpp netgen-4.9.13_new/libsrc/stlgeom/stlgeommesh.cpp
--- netgen-4.9.13_orig/libsrc/stlgeom/stlgeommesh.cpp 2009-08-10 15:40:51.000000000 +0400
-+++ netgen-4.9.13_new/libsrc/stlgeom/stlgeommesh.cpp 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/libsrc/stlgeom/stlgeommesh.cpp 2011-12-20 14:50:26.000000000 +0400
@@ -1435,7 +1435,8 @@
if (!optstring || strlen(optstring) == 0)
{
diff -Naur netgen-4.9.13_orig/nglib/nglib.h netgen-4.9.13_new/nglib/nglib.h
--- netgen-4.9.13_orig/nglib/nglib.h 2010-05-18 15:20:25.000000000 +0400
-+++ netgen-4.9.13_new/nglib/nglib.h 2014-01-15 13:59:16.000000000 +0400
++++ netgen-4.9.13_new/nglib/nglib.h 2011-12-20 14:50:26.000000000 +0400
@@ -24,7 +24,7 @@
// Philippose - 14.02.2009
// Modifications for creating a DLL in Windows
