REM Find absolute path to ROOT_DIR
@SET PARENT_DIR=%~dp0..
@SET ROOT_DIR=
-pushd %PARENT_DIR%\..
+pushd %PARENT_DIR%
@SET ROOT_DIR=%CD%
popd
-@SET SRC_DIR=%ROOT_DIR%\sources\shaper
+@SET SRC_DIR=%ROOT_DIR%\sources
call %SRC_DIR%\env_Salome.bat
mkdir %ROOT_DIR%\build
REM Find absolute path to ROOT_DIR
@SET PARENT_DIR=%~dp0..
@SET ROOT_DIR=
-pushd %PARENT_DIR%\..
+pushd %PARENT_DIR%
@SET ROOT_DIR=%CD%
popd
TestPartitionSubCompsolidWithPlane3.py
TestPartitionSubCompsolidWithPlane4.py
TestPartitionSubCompsolidWithPlane5.py
+ TestBooleanFuse_Vertex_Vertex.py
+ TestBooleanFuse_VertexCompound_VertexCompound.py
+ TestBooleanFuse_Edge_Edge.py
+ TestBooleanFuse_EdgeCompound_EdgeCompound.py
+ TestBooleanFuse_Wire_Wire.py
+ TestBooleanFuse_WireCompound_WireCompound.py
+ TestBooleanFuse_Face_Face.py
+ TestBooleanFuse_FaceCompound_FaceCompound.py
+ TestBooleanFuse_Shell_Shell.py
+ TestBooleanFuse_ShellCompound_ShellCompound.py
+ TestBooleanFuse_Solid_Solid.py
+ TestBooleanFuse_SolidCompound_SolidCompound.py
+ TestBooleanFuse_CompSolid_CompSolid.py
+ TestBooleanFuse_CompSolidCompound_CompSolidCompound.py
)
}
//==================================================================================================
-void FeaturesPlugin_BooleanFuse::loadNamingDS(std::shared_ptr<ModelAPI_ResultBody> theResultBody,
- const std::shared_ptr<GeomAPI_Shape> theBaseShape,
- const ListOfShape& theTools,
- const std::shared_ptr<GeomAPI_Shape> theResultShape,
- GeomAlgoAPI_MakeShape& theMakeShape,
- GeomAPI_DataMapOfShapeShape& theMapOfShapes)
+void FeaturesPlugin_BooleanFuse::loadNamingDS(ResultBodyPtr theResultBody,
+ const GeomShapePtr theBaseShape,
+ const ListOfShape& theTools,
+ const GeomShapePtr theResultShape,
+ GeomAlgoAPI_MakeShape& theMakeShape,
+ GeomAPI_DataMapOfShapeShape& theMapOfShapes)
{
//load result
if (theBaseShape->isEqual(theResultShape)) {
theResultBody->store(theResultShape, false);
} else {
- const int aModifyTag = 1;
- const int aModifyEdgeTag = 2;
- const int aModifyFaceTag = 3;
+ const int aModifyVTag = 1;
+ const int aModifyETag = 2;
+ const int aModifyFTag = 3;
const int aDeletedTag = 4;
/// sub solids will be placed at labels 5, 6, etc. if result is compound of solids
const int aSubsolidsTag = 5;
theResultBody->storeModified(theBaseShape, theResultShape, aSubsolidsTag);
- const std::string aModName = "Modified";
+ const std::string aModVName = "Modified_Vertex";
const std::string aModEName = "Modified_Edge";
const std::string aModFName = "Modified_Face";
+ theResultBody->loadAndOrientModifiedShapes(&theMakeShape, theBaseShape, GeomAPI_Shape::VERTEX,
+ aModifyVTag, aModVName, theMapOfShapes, false,
+ false, true);
theResultBody->loadAndOrientModifiedShapes(&theMakeShape, theBaseShape, GeomAPI_Shape::EDGE,
- aModifyEdgeTag, aModEName, theMapOfShapes, false,
+ aModifyETag, aModEName, theMapOfShapes, false,
false, true);
theResultBody->loadAndOrientModifiedShapes(&theMakeShape, theBaseShape, GeomAPI_Shape::FACE,
- aModifyFaceTag, aModFName, theMapOfShapes, false,
+ aModifyFTag, aModFName, theMapOfShapes, false,
false, true);
+
+ theResultBody->loadDeletedShapes(&theMakeShape, theBaseShape,
+ GeomAPI_Shape::VERTEX, aDeletedTag);
+ theResultBody->loadDeletedShapes(&theMakeShape, theBaseShape,
+ GeomAPI_Shape::EDGE, aDeletedTag);
theResultBody->loadDeletedShapes(&theMakeShape, theBaseShape,
GeomAPI_Shape::FACE, aDeletedTag);
- int aTag;
- std::string aName;
- for (ListOfShape::const_iterator
- anIter = theTools.begin(); anIter != theTools.end(); anIter++) {
- if ((*anIter)->shapeType() <= GeomAPI_Shape::FACE) {
- aTag = aModifyFaceTag;
- aName = aModFName;
- } else {
- aTag = aModifyEdgeTag;
- aName = aModEName;
- }
- theResultBody->loadAndOrientModifiedShapes(&theMakeShape, *anIter,
- aName == aModEName ? GeomAPI_Shape::EDGE
- : GeomAPI_Shape::FACE,
- aTag, aName, theMapOfShapes, false, false, true);
+ for (ListOfShape::const_iterator anIter = theTools.begin(); anIter != theTools.end(); anIter++)
+ {
+ theResultBody->loadAndOrientModifiedShapes(&theMakeShape, *anIter, GeomAPI_Shape::VERTEX,
+ aModifyVTag, aModVName, theMapOfShapes, false,
+ false, true);
+
+ theResultBody->loadAndOrientModifiedShapes(&theMakeShape, *anIter, GeomAPI_Shape::EDGE,
+ aModifyETag, aModEName, theMapOfShapes, false,
+ false, true);
+
+ theResultBody->loadAndOrientModifiedShapes(&theMakeShape, *anIter, GeomAPI_Shape::FACE,
+ aModifyFTag, aModFName, theMapOfShapes, false,
+ false, true);
+
+ theResultBody->loadDeletedShapes(&theMakeShape, *anIter, GeomAPI_Shape::VERTEX, aDeletedTag);
+ theResultBody->loadDeletedShapes(&theMakeShape, *anIter, GeomAPI_Shape::EDGE, aDeletedTag);
theResultBody->loadDeletedShapes(&theMakeShape, *anIter, GeomAPI_Shape::FACE, aDeletedTag);
}
}
SketchLine_1 = Sketch_1.addLine(14.65001594578831, -16.75950688440132, 21.53989436538019, 4.084511469683225)
SketchLine_1.setName("SketchLine_2")
SketchLine_1.result().setName("SketchLine_1")
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(21.53989436538019, 4.084511469683225, 17.92440575878417, 20.67042582762886)
SketchLine_2.setName("SketchLine_3")
SketchLine_2.result().setName("SketchLine_3")
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_2")
SketchLine_3 = Sketch_1.addLine(17.92440575878417, 20.67042582762886, 6.041293582700577, 31.26820121140768)
SketchLine_3.setName("SketchLine_4")
SketchLine_3.result().setName("SketchLine_4")
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
SketchArc_1 = Sketch_1.addArc(15.73021805614924, 42.13223372900752, 6.041293582700577, 31.26820121140768, 1.302016307518145, 40.2010542198842, True)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
SketchArc_2 = Sketch_1.addArc(5.884297127208473, -13.86204556507233, 14.65001594578831, -16.75950688440132, -3.31891814825968, -14.59275556007859, True)
-SketchArc_2.result().setColor(225, 0, 0)
-SketchArc_2.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_9")
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
SketchCircle_1 = Sketch_1.addCircle(0, 0, 2)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchPoint_1.result().setColor(170, 0, 225)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchAPI_Point(SketchPoint_1).coordinates())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 2)
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-32.04974271012008, 18.88336192109778, 25.20058663660772)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(22.00171526586623, 64.27272727272731, -86.7941680960549, 64.27272727272731)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-86.7941680960549, 64.27272727272731, -86.7941680960549, -27.54545454545455)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-86.7941680960549, -27.54545454545455, 22.00171526586623, -27.54545454545455)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(22.00171526586623, -27.54545454545455, 22.00171526586623, 64.27272727272731)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -12.17630887873155, 30.26420160631515)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-12.17630887873155, 30.26420160631515, -3.763260360039565, 22.15708212466651)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(-3.763260360039565, 22.15708212466651, -11.56445080464485, 13.8969981244962)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchLine_4 = Sketch_1.addLine(-11.56445080464485, 13.8969981244962, -20.89528643446688, 23.53376279136156)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
SketchLine_5 = Sketch_1.addLine(-20.89528643446688, 23.53376279136156, -3.763260360039565, 22.15708212466651)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.endPoint())
SketchLine_6 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 15.35730445516949, 31.02902419892351)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.35730445516949, 31.02902419892351, 24.53517556646984, 20.93336597649314)
-SketchLine_7.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchLine_8 = Sketch_1.addLine(24.53517556646984, 20.93336597649314, 17.03991415890789, 12.67328197632283)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchLine_9 = Sketch_1.addLine(17.03991415890789, 12.67328197632283, 7.862043047607545, 23.07486923579655)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
SketchLine_10 = Sketch_1.addLine(7.862043047607545, 23.07486923579655, 24.53517556646984, 20.93336597649314)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(-6.516621693429666, 11.60253034667112, -9.88184110090646, 19.09779175423307)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-9.88184110090646, 19.09779175423307, -1.162863545171131, 18.94482723571139)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchLine_13 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, 0.8256751956106094, 13.43810456893119)
-SketchLine_13.result().setColor(225, 0, 0)
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchLine_14 = Sketch_2.addLine(0.8256751956106094, 13.43810456893119, -6.516621693429666, 11.60253034667112)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
SketchLine_15 = Sketch_2.addLine(-1.162863545171131, 18.94482723571139, -6.516621693429666, 11.60253034667112)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.startPoint())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.endPoint())
SketchLine_16 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 15.35730445516949, 18.79186271718972)
-SketchLine_16.result().setColor(225, 0, 0)
SketchLine_17 = Sketch_2.addLine(15.35730445516949, 18.79186271718972, 12.75690764030107, 10.22584967997607)
-SketchLine_17.result().setColor(225, 0, 0)
SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
SketchLine_18 = Sketch_2.addLine(12.75690764030107, 10.22584967997607, 6.179433343869151, 7.778417383629304)
-SketchLine_18.result().setColor(225, 0, 0)
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
SketchLine_19 = Sketch_2.addLine(6.179433343869151, 7.778417383629304, 6.332397862390824, 16.34443042084296)
-SketchLine_19.result().setColor(225, 0, 0)
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
SketchLine_20 = Sketch_2.addLine(6.332397862390824, 16.34443042084296, 12.75690764030107, 10.22584967997607)
-SketchLine_20.result().setColor(225, 0, 0)
SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(19.22650602409638, 27.01445783132531, -12.83325439216414, 27.01445783132531)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 27.01445783132531, -12.83325439216414, 11.0281619215649)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 11.0281619215649, 19.22650602409638, 11.0281619215649)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(19.22650602409638, 11.0281619215649, 19.22650602409638, 27.01445783132531)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-21.66024096385543, 40.92621620645053, -77.63614457831326, 40.92621620645053)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-77.63614457831326, 40.92621620645053, -77.63614457831326, 1.907518733308514)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-77.63614457831326, 1.907518733308514, -21.66024096385543, 1.907518733308514)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-21.66024096385543, 1.907518733308514, -21.66024096385543, 40.92621620645053)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(65.46746987951809, 41.25025618940838, 10.46506024096384, 41.25025618940838)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(10.46506024096384, 41.25025618940838, 10.46506024096384, -1.337003177360179)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(10.46506024096384, -1.337003177360179, 65.46746987951809, -1.337003177360179)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(65.46746987951809, -1.337003177360179, 65.46746987951809, 41.25025618940838)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-54.27228915662651, 40.92621620645053, -55.24578313253012, 1.907518733308514)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(31.88192771084336, 41.25025618940838, 30.42168674698797, -1.337003177360179)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_5.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_7.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(19.22650602409638, 26.41583731352732, -12.83325439216414, 26.41583731352732)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-12.83325439216414, 26.41583731352732, -12.83325439216414, 12.07337391600091)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-12.83325439216414, 12.07337391600091, 19.22650602409638, 12.07337391600091)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(19.22650602409638, 12.07337391600091, 19.22650602409638, 26.41583731352732)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
SketchLine_15 = Sketch_2.addLine(0.2648302996693306, 26.41583731352732, -0.2234771832481639, 12.07337391600092)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_11.result())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_13.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(47.26932589060148, 52.61651755566245, -44.41221948537944, 52.61651755566245)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-44.41221948537944, 52.61651755566245, -44.41221948537944, -26.74931734128092)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-44.41221948537944, -26.74931734128092, 47.26932589060148, -26.74931734128092)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(47.26932589060148, -26.74931734128092, 47.26932589060148, 52.61651755566245)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(7.069530544036858, 52.61651755566245, 10.55455403994589, -26.74931734128092)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(95.24043941744291, 32.97847252814945, 25.14447162912627, 32.97847252814945)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(25.14447162912627, 32.97847252814945, 25.14447162912627, -11.61656767103746)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(25.14447162912627, -11.61656767103746, 95.24043941744291, -11.61656767103746)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(95.24043941744291, -11.61656767103746, 95.24043941744291, 32.97847252814945)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(63.78513134811883, 32.97847252814945, 65.47170548447893, -11.61656767103746)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(21.16527496861552, 26.63979884904572, -22.80735826270614, 26.63979884904572)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-22.80735826270614, 26.63979884904572, -22.80735826270614, -13.87637783487681)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-22.80735826270614, -13.87637783487681, 21.16527496861552, -13.87637783487681)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(21.16527496861552, -13.87637783487681, 21.16527496861552, 26.63979884904572)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(-2.257333687264361, 26.63979884904572, -2.257333687264361, -13.87637783487681)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(29.6987556208597, 11.4175813298688, 13.10955704685832, 11.4175813298688)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(13.10955704685832, 11.4175813298688, 13.10955704685832, -4.852594194632538)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(13.10955704685832, -4.852594194632538, 29.6987556208597, -4.852594194632538)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(29.6987556208597, -4.852594194632538, 29.6987556208597, 11.4175813298688)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(15.15938358623833, 14.4352070421809, -11.43137169301882, 14.4352070421809)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-11.43137169301882, 14.4352070421809, -11.43137169301882, -6.935604568322221)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-11.43137169301882, -6.935604568322221, 15.15938358623833, -6.935604568322221)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(15.15938358623833, -6.935604568322221, 15.15938358623833, 14.4352070421809)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(1.934351860046943, 14.4352070421809, 2.075043686921314, -6.935604568322221)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(26.29086071781277, 6.827405438264643, 9.220324256871813, 6.827405438264643)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(9.220324256871813, 6.827405438264643, 9.220324256871813, -3.640935176083419)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(9.220324256871813, -3.640935176083419, 26.29086071781277, -3.640935176083419)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(26.29086071781277, -3.640935176083419, 26.29086071781277, 6.827405438264643)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(18.73204224198193, 6.827405438264643, 19.20309616379092, -3.640935176083419)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_8.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-77.19749092035903, 24.18794374198263, -26.50243221408208, 23.76942369170098)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-52.21940522238806, 23.98173370989996, -68.62380444441784, 24.11716249058297)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
SketchLine_3 = Sketch_1.addLine(9.658082674231901, 24.38959180621407, 76.00931510902234, 24.79203653255435)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(31.27467463593981, 24.52070441885453, 55.13167389667986, 24.6654059290823)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_3.result())
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_3.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-57.23353499871462, -2.917111725546991, 40.54932729918568, 17.67239476025231)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-81.47249047471176, -8.020952206935315, 40.54932729918568, 17.67239476025231)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-26.91983967935873, 43.92184368737476, -89.26052104208418, 43.92184368737476)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 43.92184368737476, -89.26052104208418, 10.32264529058116)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 10.32264529058116, -26.91983967935873, 10.32264529058116)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-26.91983967935873, 10.32264529058116, -26.91983967935873, 43.92184368737476)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(92.09418837675352, 44.32665330661324, 12.75150300601203, 44.32665330661324)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(12.75150300601203, 44.32665330661324, 12.75150300601203, 10.32264529058116)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(12.75150300601203, 10.32264529058116, 92.09418837675352, 10.32264529058116)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(92.09418837675352, 10.32264529058116, 92.09418837675352, 44.32665330661324)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-44.32665330661324, 21.65731462925853, -65.78156312625251, 21.65731462925853)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-65.78156312625251, 21.65731462925853, -65.78156312625251, -10.72745490981964)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-65.78156312625251, -10.72745490981964, -44.32665330661324, -10.72745490981964)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-44.32665330661324, -10.72745490981964, -44.32665330661324, 21.65731462925853)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
SketchLine_13 = Sketch_2.addLine(64.56713426853709, 24.08617234468937, 42.70741482965934, 24.08617234468937)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(42.70741482965934, 24.08617234468937, 42.70741482965934, -10.32264529058116)
-SketchLine_14.result().setColor(225, 0, 0)
SketchLine_15 = Sketch_2.addLine(42.70741482965934, -10.32264529058116, 64.56713426853709, -10.32264529058116)
-SketchLine_15.result().setColor(225, 0, 0)
SketchLine_16 = Sketch_2.addLine(64.56713426853709, -10.32264529058116, 64.56713426853709, 24.08617234468937)
-SketchLine_16.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(24.08617234468939, 57.68537074148297, -74.28256513026052, 57.68537074148297)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-74.28256513026052, 57.68537074148297, -74.28256513026052, 13.96593186372746)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-74.28256513026052, 13.96593186372746, 24.08617234468939, 13.96593186372746)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(24.08617234468939, 13.96593186372746, 24.08617234468939, 57.68537074148297)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-6.679358717434877, 28.9438877755511, -34.20641282565131, 28.9438877755511)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-34.20641282565131, 28.9438877755511, -34.20641282565131, -14.37074148296594)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-34.20641282565131, -14.37074148296594, -6.679358717434877, -14.37074148296594)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(-6.679358717434877, -14.37074148296594, -6.679358717434877, 28.9438877755511)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-11.4055110220441, 59.07236770836705, -90.54579158316633, 59.07236770836705)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-90.54579158316633, 59.07236770836705, -90.54579158316633, 18.29259905792451)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-90.54579158316633, 18.29259905792451, -11.4055110220441, 18.29259905792451)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-11.4055110220441, 18.29259905792451, -11.4055110220441, 59.07236770836705)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(116.15, 58.70699100906781, 29.5612224448898, 58.70699100906781)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(29.5612224448898, 58.70699100906781, 29.5612224448898, 16.80919541788544)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(29.5612224448898, 16.80919541788544, 116.15, 16.80919541788544)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(116.15, 16.80919541788544, 116.15, 58.70699100906781)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
SketchLine_9 = Sketch_1.addLine(-51.44118236472945, 59.07236770836705, -50.51012024048097, 18.29259905792451)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_3.result())
SketchLine_10 = Sketch_1.addLine(72.85561122244489, 16.80919541788544, 73.32114228456915, 58.70699100906781)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_5.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_11 = Sketch_2.addLine(-33.65512410802471, 32.35440881763527, -66.62101906518004, 32.35440881763527)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-66.62101906518004, 32.35440881763527, -66.62101906518004, -10.93997995991984)
-SketchLine_12.result().setColor(225, 0, 0)
SketchLine_13 = Sketch_2.addLine(-66.62101906518004, -10.93997995991984, -33.65512410802471, -10.93997995991984)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(-33.65512410802471, -10.93997995991984, -33.65512410802471, 32.35440881763527)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_13.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_14.result())
SketchLine_15 = Sketch_2.addLine(-66.62101906518004, 10.47444889779559, -33.6551241080247, 9.543386773547091)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_15.startPoint(), SketchLine_12.result())
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_14.result())
SketchLine_16 = Sketch_2.addLine(86.07316931157348, 30.95781563126252, 62.43123950606181, 30.95781563126252)
-SketchLine_16.result().setColor(225, 0, 0)
SketchLine_17 = Sketch_2.addLine(62.43123950606181, 30.95781563126252, 62.43123950606181, -14.66422845691383)
-SketchLine_17.result().setColor(225, 0, 0)
SketchLine_18 = Sketch_2.addLine(62.43123950606181, -14.66422845691383, 86.07316931157348, -14.66422845691383)
-SketchLine_18.result().setColor(225, 0, 0)
SketchLine_19 = Sketch_2.addLine(86.07316931157348, -14.66422845691383, 86.07316931157348, 30.95781563126252)
-SketchLine_19.result().setColor(225, 0, 0)
SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_16.startPoint())
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_18.result())
SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_19.result())
SketchLine_20 = Sketch_2.addLine(62.43123950606181, 3.491482965931855, 86.07316931157347, 4.888076152304602)
-SketchLine_20.result().setColor(225, 0, 0)
SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_20.startPoint(), SketchLine_17.result())
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_19.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-8.703406813627256, 48.70884844011781, -89.26052104208418, 48.70884844011781)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-89.26052104208418, 48.70884844011781, -89.26052104208418, 1.699676379809279)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-89.26052104208418, 1.699676379809279, -8.703406813627256, 1.699676379809279)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-8.703406813627256, 1.699676379809279, -8.703406813627256, 48.70884844011781)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(-50.39879759519037, 48.70884844011781, -49.99398797595192, 1.699676379809278)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_6 = Sketch_2.addLine(-27.69909819639279, -33.75100200400802, -61.96570844393754, -33.75100200400802)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-61.96570844393754, -33.75100200400802, -61.96570844393754, 19.31953907815632)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(-61.96570844393754, 19.31953907815632, -27.69909819639279, 19.31953907815632)
-SketchLine_8.result().setColor(225, 0, 0)
SketchLine_9 = Sketch_2.addLine(-27.69909819639279, 19.31953907815632, -27.69909819639279, -33.75100200400802)
-SketchLine_9.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
SketchLine_10 = Sketch_2.addLine(-61.96570844393754, -12.80210420841683, -27.69909819639279, -13.26763527054108)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchLine_7.result())
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_9.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-8.142167372244474, 30.79863310370742, -42.12686596943888, 30.79863310370742)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-42.12686596943888, 30.79863310370742, -42.12686596943888, -6.018123709919844)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-42.12686596943888, -6.018123709919844, -8.142167372244474, -6.018123709919844)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-8.142167372244474, -6.018123709919844, -8.142167372244474, 30.79863310370742)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(49.91502606462924, 30.79863310370742, 15.22231291332662, 30.79863310370742)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(15.22231291332662, 30.79863310370742, 15.22231291332662, -5.310109155811627)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.22231291332662, -5.310109155811627, 49.91502606462924, -5.310109155811627)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(49.91502606462924, -5.310109155811627, 49.91502606462924, 30.79863310370742)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 10)
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(32.99903071986655, 54.47604223124301, -21.74338409862735, 54.47604223124301)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-21.74338409862735, 54.47604223124301, -21.74338409862735, -10.16156298864041)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-21.74338409862735, -10.16156298864041, 32.99903071986655, -10.16156298864041)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(32.99903071986655, -10.16156298864041, 32.99903071986655, 54.47604223124301)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-29.34869739478959, 31.37274549098196, -65.37675350701403, 31.37274549098196)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-65.37675350701403, 31.37274549098196, -65.37675350701403, -6.274549098196388)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-65.37675350701403, -6.274549098196388, -29.34869739478959, -6.274549098196388)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-29.34869739478959, -6.274549098196388, -29.34869739478959, 31.37274549098196)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(41.08817635270542, 32.5871743486974, 11.5370741482966, 32.5871743486974)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(11.5370741482966, 32.5871743486974, 11.5370741482966, -8.703406813627252)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(11.5370741482966, -8.703406813627252, 41.08817635270542, -8.703406813627252)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(41.08817635270542, -8.703406813627252, 41.08817635270542, 32.5871743486974)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-36.83851213815001, 4.871192068212162, -37.23534778672252, 23.01200273357838)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-37.23534778672252, 23.01200273357838, -8.095368404429529, 22.8820142517576)
-SketchLine_10.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchLine_11 = Sketch_2.addLine(-8.095368404429529, 22.8820142517576, 20.86605178109317, 22.08563377543123)
-SketchLine_11.result().setColor(225, 0, 0)
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchLine_12 = Sketch_2.addLine(20.86605178109317, 22.08563377543123, 22.14286343998464, -2.004860047909258)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchLine_13 = Sketch_2.addLine(22.14286343998464, -2.004860047909258, -4.857114760245733, -1.198368777231491)
-SketchLine_13.result().setColor(225, 0, 0)
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchLine_14 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -36.83851213815001, 4.871192068212162)
-SketchLine_14.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_14.endPoint())
SketchLine_15 = Sketch_2.addLine(-4.857114760245733, -1.198368777231491, -8.095368404429529, 22.8820142517576)
-SketchLine_15.result().setColor(225, 0, 0)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_15.startPoint())
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_15.endPoint())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-10.72745490981964, 42.70741482965933, -40.27855711422846, 42.70741482965933)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-40.27855711422846, 42.70741482965933, -40.27855711422846, 9.513026052104207)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-40.27855711422846, 9.513026052104207, -10.72745490981964, 9.513026052104207)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(-10.72745490981964, 9.513026052104207, -10.72745490981964, 42.70741482965933)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(51.61322645290581, 42.70741482965933, 15.98997995991983, 42.70741482965933)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_1.addLine(15.98997995991983, 42.70741482965933, 15.98997995991983, 8.298597194388774)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_1.addLine(15.98997995991983, 8.298597194388774, 51.61322645290581, 8.298597194388774)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_1.addLine(51.61322645290581, 8.298597194388774, 51.61322645290581, 42.70741482965933)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_9 = Sketch_2.addLine(-17.20440881763527, 19.22845691382766, -33.80160320641282, 19.22845691382766)
-SketchLine_9.result().setColor(225, 0, 0)
SketchLine_10 = Sketch_2.addLine(-33.80160320641282, 19.22845691382766, -33.80160320641282, -6.679358717434865)
-SketchLine_10.result().setColor(225, 0, 0)
SketchLine_11 = Sketch_2.addLine(-33.80160320641282, -6.679358717434865, -17.20440881763527, -6.679358717434865)
-SketchLine_11.result().setColor(225, 0, 0)
SketchLine_12 = Sketch_2.addLine(-17.20440881763527, -6.679358717434865, -17.20440881763527, 19.22845691382766)
-SketchLine_12.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
SketchLine_13 = Sketch_2.addLine(41.4929859719439, 21.25250501002005, 26.51503006012023, 21.25250501002005)
-SketchLine_13.result().setColor(225, 0, 0)
SketchLine_14 = Sketch_2.addLine(26.51503006012023, 21.25250501002005, 26.51503006012023, -9.917835671342685)
-SketchLine_14.result().setColor(225, 0, 0)
SketchLine_15 = Sketch_2.addLine(26.51503006012023, -9.917835671342685, 41.4929859719439, -9.917835671342685)
-SketchLine_15.result().setColor(225, 0, 0)
SketchLine_16 = Sketch_2.addLine(41.4929859719439, -9.917835671342685, 41.4929859719439, 21.25250501002005)
-SketchLine_16.result().setColor(225, 0, 0)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-19.01903137581643, 2.528314065029049, 44.55011038017909)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")])
Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), 10)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(35.42084168336675, 22.87174348697394, -27.32464929859721, 22.87174348697394)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-27.32464929859721, 22.87174348697394, -27.32464929859721, -13.08560194713185)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-27.32464929859721, -13.08560194713185, 35.42084168336675, -13.08560194713185)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(35.42084168336675, -13.08560194713185, 35.42084168336675, 22.87174348697394)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
SketchLine_5 = Sketch_1.addLine(4.250501002003999, 22.87174348697394, 4.250501002003999, -13.08560194713185)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_1.result())
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_3.result())
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-28.13426853707415, 23.27655310621242)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(10.32264529058116, 23.27655310621242)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(47.56513026052106, 23.27655310621242)
-SketchPoint_3.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(15.05904629113425, 12.50050543761873)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(47.25352258215165, 31.63008715695855)
-SketchPoint_2.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")])
Common_1 = model.addCommon(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_3 = Sketch_2.addPoint(15.05904629113425, 12.50050543761873)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), False)
SketchPoint_4 = SketchProjection_1.createdFeature()
-SketchPoint_4.result().setColor(170, 0, 225)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchPoint_3.coordinates(), SketchPoint_4.result())
model.do()
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_3-SketchProjection_1-SketchPoint_4")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-88.6588483815807, 35.68247765805569, -60.62456998069012, -7.998839850308682)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-60.62456998069012, -7.998839850308682, -33.24225154261096, 37.63835754648991)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(22.82630525917019, 37.63835754648991, 47.60078384600371, -9.954719738742909)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(47.60078384600371, -9.954719738742909, 74.33114232127146, 36.3344376208671)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-75.23467769579756, 14.76574658950986, -60.62456998069012, -7.998839850308684)
-SketchLine_5.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
SketchLine_6 = SketchProjection_1.createdFeature()
-SketchLine_6.result().setColor(170, 0, 225)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_6.result())
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_6).endPoint(), SketchLine_5.endPoint())
SketchLine_7 = Sketch_2.addLine(-60.62456998069012, -7.998839850308684, -47.51524103341781, 13.8500417284785)
-SketchLine_7.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
SketchLine_8 = SketchProjection_2.createdFeature()
-SketchLine_8.result().setColor(170, 0, 225)
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
SketchLine_9 = Sketch_2.addLine(35.74952364371219, 12.81217486039606, 47.60078384600371, -9.954719738742909)
-SketchLine_9.result().setColor(225, 0, 0)
SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), False)
SketchLine_10 = SketchProjection_3.createdFeature()
-SketchLine_10.result().setColor(170, 0, 225)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchLine_10.result())
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_10).endPoint(), SketchLine_9.endPoint())
SketchLine_11 = Sketch_2.addLine(47.60078384600371, -9.954719738742909, 64.13719888777418, 18.68151118724985)
-SketchLine_11.result().setColor(225, 0, 0)
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_11.startPoint())
SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
SketchLine_12 = SketchProjection_4.createdFeature()
-SketchLine_12.result().setColor(170, 0, 225)
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.result())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-44.32557091040492, 34.37855773243287, -1.296213364851963, -18.43019925529121)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-1.296213364851963, -18.43019925529121, 39.1253043294554, 29.81483799275304)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_3 = Sketch_2.addLine(-15.313984501828, -1.226571041729713, -1.296213364851965, -18.43019925529121)
-SketchLine_3.result().setColor(225, 0, 0)
SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
SketchLine_4 = SketchProjection_1.createdFeature()
-SketchLine_4.result().setColor(170, 0, 225)
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_4).endPoint(), SketchLine_3.endPoint())
SketchLine_5 = Sketch_2.addLine(-1.296213364851965, -18.43019925529121, 20.70651786493702, 7.831125115747244)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_5.startPoint())
SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
SketchLine_6 = SketchProjection_2.createdFeature()
-SketchLine_6.result().setColor(170, 0, 225)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-65.75962883650391, 1.812165175943577, 20.84344758927215)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-64.98081644495703, 22.64105757725738, -64.58019600110421, -18.99788637597517)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
SketchCircle_2 = Sketch_1.addCircle(62.53870966583226, 1.604010602289747, 23.75523331537361)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(63.75890236666707, 25.3278854890081, 63.76050419996562, -22.11978184293701)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-32.47294132465983, 2.220594155120791, 24.592292084386)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-57.05151402373072, 3.041930894979393, -7.893787575150295, 1.41683366733466)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchCircle_3.results()[1])
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchCircle_3.results()[1])
SketchCircle_4 = Sketch_2.addCircle(107.0005131452338, 2.231606536656211, 32.56614591098422)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(74.45658844157124, 3.434446666454839, 139.5031967571015, 0.1995097076777023)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchCircle_4.results()[1])
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchCircle_4.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-23.21770404974615, 0.697956782029321, 35.59095357943583)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-23.86759161364122, 36.28297642299413, -22.5735889911581, -34.88716781357743)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(32.08143103297851, 1.286314091165838, 40.2404383217231)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-8.153954725266397, 0.6486549270159857, 72.23884334545456, 3.869938036363647)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-13.70458696967078, 45.46669742770666, 15.88340489230536, 45.46669742770666)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-13.21145377197118, 31.16583469441819, 14.89713849690615, 31.41240129326799)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-5.074756009927738, 49.65832960815328, -4.828189411077946, 26.48106931627197)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(7.993273729111718, 49.41176300930348, 8.23984032796152, 26.48106931627197)
-SketchLine_4.result().setColor(225, 0, 0)
model.do()
Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Compound_2 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-28.62948623265935, 53.77363153293705, 40.23707952134417, 53.11775947813702)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-26.66187006825925, 26.22700523133564, 40.89295157614425, 26.22700523133564)
-SketchLine_2.result().setColor(225, 0, 0)
model.do()
Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 10)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_3 = Sketch_2.addLine(14.6580693841429, 60.98822413573743, -10.2650686982584, 60.98822413573743)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(-10.2650686982584, 60.98822413573743, -10.2650686982584, 18.35654057373522)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_2.addLine(-10.2650686982584, 18.35654057373522, 14.6580693841429, 18.35654057373522)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(14.6580693841429, 18.35654057373522, 14.6580693841429, 60.98822413573743)
-SketchLine_6.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-25.12006861063466, 20.61578044596912, 27.54545454545454, 58.72898799313897)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-19.22984562607204, 56.30360205831907, 22.69468267581474, 22.00171526586621)
-SketchLine_2.result().setColor(225, 0, 0)
model.do()
Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
Cut_1 = model.addCut(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_1_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-30.96793587174349, 41.08817635270543, 39.4689378757515, 41.4929859719439)
-SketchLine_1.result().setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_2 = Sketch_2.addLine(13.96593186372747, 52.01803607214429, -9.917835671342695, 52.01803607214429)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-9.917835671342695, 52.01803607214429, -9.917835671342695, 27.32464929859719)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(-9.917835671342695, 27.32464929859719, 13.96593186372747, 27.32464929859719)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_2.addLine(13.96593186372747, 27.32464929859719, 13.96593186372747, 52.01803607214429)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-49.71737993138937, 2.062011149228122, 25.20652382544127)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchCircle_2 = Sketch_1.addCircle(41.46933533447686, 0.6873370497427074, 27.03914027119833)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-15.35052744425385, 1.145561749571189, 23.35148318113706)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(82.70955831903943, -3.436685248713552, 26.06650182177207)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2")])
Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-6.063464837049752, 0.8662092624356818, 32.2304349637617)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
SketchPoint_1 = SketchProjection_1.createdFeature()
-SketchPoint_1.result().setColor(170, 0, 225)
SketchCircle_2 = Sketch_2.addCircle(33.45888578231592, 3.635557519489646, 33.65582143213236)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_2.results()[1])
model.do()
Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-8.850181926352695, 1.062021831162306, 46.73432400996293)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(64.95207814695526, 55.29739830292169, -8.272875875352462, 55.29739830292169)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-8.272875875352462, 55.29739830292169, -8.272875875352462, -5.036618941767999)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-8.272875875352462, -5.036618941767999, 64.95207814695526, -5.036618941767999)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(64.95207814695526, -5.036618941767999, 64.95207814695526, 55.29739830292169)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-174.3348611545506, 14.32227876658794, 70.49121821473575)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-170.8787982705978, 84.72872358712971, -177.6798961073988, -56.0895283864863)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
SketchCircle_2 = Sketch_1.addCircle(156.5938368884866, -3.269359348234124, 86.69415181338225)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(159.264749945663, 83.38363934242156, 152.8285624017236, -89.88170642808817)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-63.56168377478743, 4.78844798363732, 75.55300890562218)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(322.6564034385849, -22.92418256149703, 118.030609731015)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-138.9405630492767, 9.915017403336009, 11.9830331245263, 5.907779612586542)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_3.startPoint(), SketchCircle_3.results()[1])
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchCircle_3.results()[1])
SketchLine_4 = Sketch_2.addLine(207.6267015097382, 3.521847530670962, 440.2647819790861, -32.89885701981125)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchCircle_4.results()[1])
SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchCircle_4.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-32.92409574173262, 1.332083115848444, 52.41665939244462)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(-32.3899127495535, 53.7460204836366, -32.9246838934834, -51.08457627329644)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchCircle_1.results()[1])
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchCircle_1.results()[1])
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(52.19056504290929, 1.630574981545157, 59.89949304384059)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(112.0898160449407, 1.460291967886176, -7.70480537031941, 0.9278161529026914)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchCircle_2.results()[1])
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchCircle_2.results()[1])
model.do()
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-64.66755707084829, 12.13132840151158, 21.07964902130243)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
SketchCircle_2 = Sketch_1.addCircle(45.61684376247555, 1.775642744728198, 22.96122819474142)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_3 = Sketch_2.addCircle(-36.49725872565889, 7.160803013521951, 17.872664608039)
-SketchCircle_3.result().setColor(225, 0, 0)
-SketchCircle_3.results()[1].setColor(225, 0, 0)
SketchCircle_4 = Sketch_2.addCircle(78.03127953954764, -3.93858425080257, 22.76570299983515)
-SketchCircle_4.result().setColor(225, 0, 0)
-SketchCircle_4.results()[1].setColor(225, 0, 0)
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 20, 20)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(15.58517034068135, 30.56312625250501, -33.39679358717434, 30.56312625250501)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-33.39679358717434, 30.56312625250501, -33.39679358717434, -16.39478957915832)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_1.addLine(-33.39679358717434, -16.39478957915832, 15.58517034068135, -16.39478957915832)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(15.58517034068135, -16.39478957915832, 15.58517034068135, 30.56312625250501)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(35.01603206412826, 45.13627254509017, -8.298597194388776, 45.13627254509017)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-8.298597194388776, 45.13627254509017, -8.298597194388776, 6.679358717434865)
-SketchLine_6.result().setColor(225, 0, 0)
SketchLine_7 = Sketch_2.addLine(-8.298597194388776, 6.679358717434865, 35.01603206412826, 6.679358717434865)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(35.01603206412826, 6.679358717434865, 35.01603206412826, 45.13627254509017)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-61.63122212692967, 34.13774013722127)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(-27.26436963979418, 34.59596483704974)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(25.43147084048027, 34.59596483704974)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchPoint_4 = Sketch_1.addPoint(54.29962692967411, 33.67951543739281)
-SketchPoint_4.result().setColor(225, 0, 0)
model.do()
Compound_1_objects = [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4")]
Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_2.addLine(42.11715050385933, 45.75316349699826, -43.32915483490565, 45.75316349699826)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_2.addLine(-43.32915483490565, 45.75316349699826, -43.32915483490565, 20.90707471054887)
-SketchLine_2.result().setColor(225, 0, 0)
SketchLine_3 = Sketch_2.addLine(-43.32915483490565, 20.90707471054887, 42.11715050385933, 20.90707471054887)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_2.addLine(42.11715050385933, 20.90707471054887, 42.11715050385933, 45.75316349699826)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(-61.63122212692967, 34.13774013722127)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(-27.26436963979418, 34.59596483704974)
-SketchPoint_2.result().setColor(225, 0, 0)
SketchPoint_3 = Sketch_1.addPoint(25.43147084048027, 34.59596483704974)
-SketchPoint_3.result().setColor(225, 0, 0)
SketchPoint_4 = Sketch_1.addPoint(54.29962692967411, 33.67951543739281)
-SketchPoint_4.result().setColor(225, 0, 0)
model.do()
Compound_1_objects = [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4")]
Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchPoint_1 = Sketch_1.addPoint(0, 50)
-SketchPoint_1.result().setColor(225, 0, 0)
SketchPoint_2 = Sketch_1.addPoint(0, 25)
-SketchPoint_2.result().setColor(225, 0, 0)
model.do()
Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
Vertex_2 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-64.96569468267583, 22.00171526586621, -41.05831903945112, 55.95711835334479)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-41.05831903945112, 55.95711835334479, -23.04116638078903, 21.65523156089195)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(14.72555746140652, 19.92281303602059, 33.43567753001715, 55.95711835334479)
-SketchLine_3.result().setColor(225, 0, 0)
SketchLine_4 = Sketch_1.addLine(33.43567753001715, 55.95711835334479, 50.75986277873073, 22.69468267581476)
-SketchLine_4.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_5 = Sketch_2.addLine(-67.39108061749573, 66.6981132075472, -42.44425385934821, 35.51457975986279)
-SketchLine_5.result().setColor(225, 0, 0)
SketchLine_6 = Sketch_2.addLine(-42.44425385934821, 35.51457975986279, -16.1114922813036, 69.1234991423671)
-SketchLine_6.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
SketchLine_7 = Sketch_2.addLine(12.64665523156088, 66.6981132075472, 35.16809605488852, 36.5540308747856)
-SketchLine_7.result().setColor(225, 0, 0)
SketchLine_8 = Sketch_2.addLine(35.16809605488852, 36.5540308747856, 52.49228130360206, 66.35162950257292)
-SketchLine_8.result().setColor(225, 0, 0)
SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
model.do()
Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-26.15951972555746, 50.06689536878219, -17.15094339622642, 14.37907375643225)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-17.15094339622642, 14.37907375643225, 26.85248713550602, 14.72555746140652)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(26.85248713550602, 14.72555746140652, 34.47512864493997, 50.41337907375645)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_2.addCircle(3.984562607204112, 58.72898799313897, 38.16357190022508)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Wire_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")]
Wire_1 = model.addWire(Part_1_doc, Wire_1_objects)
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_1 = Sketch_1.addLine(-67.98180952066137, 66.89107262893774, -22.72663773945906, 26.22700523133564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchLine_2 = Sketch_1.addLine(-22.72663773945906, 26.22700523133564, 31.71074280894377, 25.5711331765356)
-SketchLine_2.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
SketchLine_3 = Sketch_1.addLine(31.71074280894377, 25.5711331765356, 74.99829842574599, 68.85868879333785)
-SketchLine_3.result().setColor(225, 0, 0)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
SketchLine_4 = Sketch_1.addLine(-58.79960075346089, 25.5711331765356, 3.508244452542322, 60.3323520809374)
-SketchLine_4.result().setColor(225, 0, 0)
SketchLine_5 = Sketch_1.addLine(3.508244452542322, 60.3323520809374, 63.1926014393454, 22.94764495733547)
-SketchLine_5.result().setColor(225, 0, 0)
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
model.do()
Wire_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")]
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-81.42367066895368, 33.08919382504288, -49.89365351629502, 58.72898799313894)
+SketchLine_2 = Sketch_1.addLine(-49.89365351629502, 58.72898799313894, -14.89879931389364, 32.04974271012008)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-14.89879931389364, 32.04974271012008, -45.04288164665522, 2.598627787307022)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-45.04288164665522, 2.598627787307022, -81.42367066895368, 33.08919382504288)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-49.89365351629502, 58.72898799313894, -45.04288164665522, 2.598627787307022)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(40.88507718696397, 37.93996569468268, 70.33619210977699, 65.31217838765009)
+SketchLine_7 = Sketch_1.addLine(70.33619210977699, 65.31217838765009, 91.81818181818181, 33.43567753001717)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(91.81818181818181, 33.43567753001717, 59.24871355060034, 6.756432246998279)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(59.24871355060034, 6.756432246998279, 40.88507718696397, 37.93996569468268)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_1.addLine(70.33619210977699, 65.31217838765009, 59.24871355060034, 6.756432246998279)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(-24.25385934819896, -5.370497427101204, -36.03430531732418, 28.93138936535163)
+SketchLine_12 = Sketch_2.addLine(-36.03430531732418, 28.93138936535163, -6.23670668953688, 16.80445969125213)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_2.addLine(-6.23670668953688, 16.80445969125213, -4.850771869639785, -14.37907375643225)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_2.addLine(-4.850771869639785, -14.37907375643225, -24.25385934819896, -5.370497427101204)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
+SketchLine_15 = Sketch_2.addLine(-24.25385934819896, -5.370497427101204, -6.23670668953688, 16.80445969125213)
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.endPoint())
+SketchLine_16 = Sketch_2.addLine(32.22298456260721, 12.30017152658662, 55.78387650085761, 33.78216123499142)
+SketchLine_17 = Sketch_2.addLine(55.78387650085761, 33.78216123499142, 51.27958833619211, 2.252144082332767)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchLine_18 = Sketch_2.addLine(51.27958833619211, 2.252144082332767, 27.71869639794167, -15.41852487135506)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
+SketchLine_19 = Sketch_2.addLine(27.71869639794167, -15.41852487135506, 32.22298456260721, 12.30017152658662)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
+SketchLine_20 = Sketch_2.addLine(32.22298456260721, 12.30017152658662, 51.27958833619211, 2.252144082332767)
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 50, -20)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_2_1"), model.selection("COMPSOLID", "Extrusion_2_2")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")], True)
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [24])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [108])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [216])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-87.19866468842729, 38.44668397626113, -52.3191988130564, 59.05727744807122)
+SketchLine_2 = Sketch_1.addLine(-52.3191988130564, 59.05727744807122, -10.30529673590503, 36.86125370919882)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-10.30529673590503, 36.86125370919882, -59.45363501483681, 10.70165430267062)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-59.45363501483681, 10.70165430267062, -87.19866468842729, 38.44668397626113)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-52.3191988130564, 59.05727744807122, -59.45363501483681, 10.70165430267062)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(-44.00943641618498, -5.404667630057807, -42.4652456647399, 37.06057803468208)
+SketchLine_7 = Sketch_2.addLine(-42.4652456647399, 37.06057803468208, -11.58143063583817, 13.12562138728323)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(-11.58143063583817, 13.12562138728323, -16.2140028901734, -17.75819364161849)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(-16.2140028901734, -17.75819364161849, -44.00943641618498, -5.404667630057807)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_2.addLine(-44.00943641618498, -5.404667630057807, -11.58143063583817, 13.12562138728323)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1"), model.selection("COMPOUND", "Sketch_2")], model.selection(), 10, 0)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("COMPSOLID", "Extrusion_1_2")], True)
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [11])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [54])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [108])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-71.60846560846564, -5.878306878306883, -32.06349206349206, 30.99470899470901)
+SketchLine_2 = Sketch_1.addLine(17.63492063492066, -11.75661375661376, 49.16402116402119, 24.04761904761905)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_3 = Sketch_2.addLine(-70.53968253968257, 29.92592592592593, -31.52910052910054, -5.343915343915344)
+SketchLine_4 = Sketch_2.addLine(14.96296296296294, 26.18518518518519, 50.23280423280426, -8.015873015873021)
+model.do()
+Edge_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4")]
+Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Edge_1_1"), model.selection("EDGE", "Edge_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("EDGE", "Edge_1_3"), model.selection("EDGE", "Edge_1_4")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [8])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-37.40740740740741, -11.75661375661376, 41.14814814814816, 42.75132275132275)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_2 = Sketch_2.addLine(-24.04761904761907, 40.07936507936508, 39.54497354497357, -14.96296296296296)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_2")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("EDGE", "Edge_1_2"), model.selection("EDGE", "Edge_1_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_1.addCircle(-35.3684929577465, 31.98214788732393, 24.26807713993482)
+SketchCircle_2 = Sketch_1.addCircle(51.92395774647893, 31.22962676056337, 25.62994603225585)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_3 = Sketch_2.addCircle(-36.12101408450705, -7.148950704225357, 25.24032590912034)
+SketchCircle_4 = Sketch_2.addCircle(51.92395774647893, -12.41659859154929, 31.3630728131964)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_2_2f")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")])
+Face_4 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")], True)
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [8])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_1.addCircle(-12.81989708404803, 27.54545454545454, 25.29331046312177)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_2 = Sketch_2.addCircle(22.86792452830187, 26.50600343053173, 30.90704565816075)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")], True)
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [4])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-83.2865672209026, 26.7937406175772, -53.58748123515441, 47.45397434679335)
+SketchLine_2 = Sketch_1.addLine(-53.58748123515441, 47.45397434679335, -26.47092446555818, 25.50247600950118)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-26.47092446555818, 25.50247600950118, -53.58748123515441, 5.487874584323028)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-53.58748123515441, 5.487874584323028, -83.2865672209026, 26.7937406175772)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-53.58748123515441, 47.45397434679335, -53.58748123515441, 5.487874584323028)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(24.53402755344418, 35.83259287410926, 55.52437814726837, 51.32776817102136)
+SketchLine_7 = Sketch_1.addLine(55.52437814726837, 51.32776817102136, 87.16036104513063, 32.60443135391922)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_1.addLine(87.16036104513063, 32.60443135391922, 53.58748123515437, 16.46362375296911)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_1.addLine(53.58748123515437, 16.46362375296911, 24.53402755344418, 35.83259287410926)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_1.addLine(55.52437814726837, 51.32776817102136, 53.58748123515437, 16.46362375296911)
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_11 = Sketch_2.addLine(-85.86909643705464, 4.842242280285022, -62.62633349168645, 26.7937406175772)
+SketchLine_12 = Sketch_2.addLine(-62.62633349168645, 26.7937406175772, -65.20886270783846, -2.259713064133024)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchLine_13 = Sketch_2.addLine(-65.20886270783846, -2.259713064133024, -83.9321995249406, -14.52672684085511)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchLine_14 = Sketch_2.addLine(-83.9321995249406, -14.52672684085511, -85.86909643705464, 4.842242280285022)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_14.endPoint())
+SketchLine_15 = Sketch_2.addLine(-85.86909643705464, 4.842242280285022, -65.20886270783846, -2.259713064133024)
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_15.endPoint())
+SketchLine_16 = Sketch_2.addLine(31.63598289786226, 11.9441976247031, 44.54862897862235, 33.25006365795723)
+SketchLine_17 = Sketch_2.addLine(44.54862897862235, 33.25006365795723, 52.29621662707837, 8.070403800475056)
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
+SketchLine_18 = Sketch_2.addLine(52.29621662707837, 8.070403800475056, 32.28161520190027, -12.58982992874109)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
+SketchLine_19 = Sketch_2.addLine(32.28161520190027, -12.58982992874109, 31.63598289786226, 11.9441976247031)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_19.endPoint())
+SketchLine_20 = Sketch_2.addLine(31.63598289786226, 11.9441976247031, 52.29621662707837, 8.070403800475056)
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_20.endPoint())
+model.do()
+Shell_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_4r-SketchLine_5r"), model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchLine_3r-SketchLine_5f"), model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_9r-SketchLine_10r"), model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_8r-SketchLine_10f"), model.selection("FACE", "Sketch_2/Face-SketchLine_11r-SketchLine_12r-SketchLine_15f"), model.selection("FACE", "Sketch_2/Face-SketchLine_13r-SketchLine_14r-SketchLine_15r"), model.selection("FACE", "Sketch_2/Face-SketchLine_16r-SketchLine_17r-SketchLine_20f"), model.selection("FACE", "Sketch_2/Face-SketchLine_18r-SketchLine_19r-SketchLine_20r")]
+Shell_1 = model.addShell(Part_1_doc, Shell_1_objects)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SHELL", "Shell_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("SHELL", "Shell_1_3"), model.selection("SHELL", "Shell_1_4")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [8])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [5])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [2])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-82.64093491686459, 27.4393729216152, -55.52437814726841, 47.45397434679335)
+SketchLine_2 = Sketch_1.addLine(-55.52437814726841, 47.45397434679335, -29.69908598574823, 30.02190213776723)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-29.69908598574823, 30.02190213776723, -54.2331135391924, 7.424771496437049)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-54.2331135391924, 7.424771496437049, -82.64093491686459, 27.4393729216152)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchLine_5 = Sketch_1.addLine(-55.52437814726841, 47.45397434679335, -54.2331135391924, 7.424771496437049)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_6 = Sketch_2.addLine(-84.57783182897859, 11.29856532066509, -63.91759809976246, 28.73063752969122)
+SketchLine_7 = Sketch_2.addLine(-63.91759809976246, 28.73063752969122, -60.68943657957245, -4.196609976247029)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(-60.68943657957245, -4.196609976247029, -84.57783182897859, -14.52672684085511)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(-84.57783182897859, -14.52672684085511, -84.57783182897859, 11.29856532066509)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_2.addLine(-84.57783182897859, 11.29856532066509, -60.68943657957245, -4.196609976247029)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_10.endPoint())
+model.do()
+Shell_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_4r-SketchLine_5r"), model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchLine_3r-SketchLine_5f"), model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7r-SketchLine_10f"), model.selection("FACE", "Sketch_2/Face-SketchLine_8r-SketchLine_9r-SketchLine_10r")]
+Shell_1 = model.addShell(Part_1_doc, Shell_1_objects)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SHELL", "Shell_1_1"), model.selection("SHELL", "Shell_1_2")], True)
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [18])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [36])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-26.93407123287669, 40.82195171232873, -80.80221369863011, 40.82195171232873)
+SketchLine_2 = Sketch_1.addLine(-80.80221369863011, 40.82195171232873, -80.80221369863011, -8.837742123287665)
+SketchLine_3 = Sketch_1.addLine(-80.80221369863011, -8.837742123287665, -26.93407123287669, -8.837742123287665)
+SketchLine_4 = Sketch_1.addLine(-26.93407123287669, -8.837742123287665, -26.93407123287669, 40.82195171232873)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(91.74418013698632, 40.82195171232873, 36.19265821917805, 40.82195171232873)
+SketchLine_6 = Sketch_1.addLine(36.19265821917805, 40.82195171232873, 36.19265821917805, -15.57125993150685)
+SketchLine_7 = Sketch_1.addLine(36.19265821917805, -15.57125993150685, 91.74418013698632, -15.57125993150685)
+SketchLine_8 = Sketch_1.addLine(91.74418013698632, -15.57125993150685, 91.74418013698632, 40.82195171232873)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 100, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_9 = Sketch_2.addLine(-14.30872534246576, 22.30477773972602, -41.24279657534246, 22.30477773972602)
+SketchLine_10 = Sketch_2.addLine(-41.24279657534246, 22.30477773972602, -41.24279657534246, 1.262534589041107)
+SketchLine_11 = Sketch_2.addLine(-41.24279657534246, 1.262534589041107, -14.30872534246576, 1.262534589041107)
+SketchLine_12 = Sketch_2.addLine(-14.30872534246576, 1.262534589041107, -14.30872534246576, 22.30477773972602)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_12.result())
+SketchLine_13 = Sketch_2.addLine(123.7283897260274, 22.30477773972602, 74.91038561643839, 22.30477773972602)
+SketchLine_14 = Sketch_2.addLine(74.91038561643839, 22.30477773972602, 74.91038561643839, -0.4208448630136968)
+SketchLine_15 = Sketch_2.addLine(74.91038561643839, -0.4208448630136968, 123.7283897260274, -0.4208448630136968)
+SketchLine_16 = Sketch_2.addLine(123.7283897260274, -0.4208448630136968, 123.7283897260274, 22.30477773972602)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_13.result())
+SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_14.result())
+SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_15.result())
+SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_16.result())
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 40, -20)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [22])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [96])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [192])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-22.17495711835335, 33.08919382504288, -50.93310463121783, 33.08919382504288)
+SketchLine_2 = Sketch_1.addLine(-50.93310463121783, 33.08919382504288, -50.93310463121783, 7.102915951972556)
+SketchLine_3 = Sketch_1.addLine(-50.93310463121783, 7.102915951972556, -22.17495711835335, 7.102915951972556)
+SketchLine_4 = Sketch_1.addLine(-22.17495711835335, 7.102915951972556, -22.17495711835335, 33.08919382504288)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 50, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
+SketchLine_5 = Sketch_2.addLine(-38.01624011480907, 11.11021000825241, -18.03083750064881, 11.11021000825241)
+SketchLine_6 = Sketch_2.addLine(-18.03083750064881, 11.11021000825241, -18.03083750064881, 22.05701811772883)
+SketchLine_7 = Sketch_2.addLine(-18.03083750064881, 22.05701811772883, -38.01624011480907, 22.05701811772883)
+SketchLine_8 = Sketch_2.addLine(-38.01624011480907, 22.05701811772883, -38.01624011480907, 11.11021000825241)
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), 30, -20)
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [11])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [48])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [96])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchPoint_1 = Sketch_1.addPoint(-22.97883597883597, 19.23809523809524)
+SketchPoint_2 = Sketch_1.addPoint(18.16931216931219, 17.1005291005291)
+SketchPoint_3 = Sketch_1.addPoint(-19.77248677248678, -16.03174603174603)
+SketchPoint_4 = Sketch_1.addPoint(21.37566137566138, -16.03174603174603)
+model.do()
+Vertex_1_objects = [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_3"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_4"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2")]
+Vertex_1 = model.addVertex(Part_1_doc, Vertex_1_objects)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("VERTEX", "Vertex_1_3"), model.selection("VERTEX", "Vertex_1_4")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [4])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchPoint_1 = Sketch_1.addPoint(-6.078627161807992, -0.4501231771005025)
+SketchPoint_2 = Sketch_1.addPoint(7.482208269631659, 3.929326826374309)
+model.do()
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_2"), model.selection("VERTEX", "Sketch_1/Vertex-SketchPoint_1")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_1_2")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [2])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-74.539241607565, 22.811578250591, -50.12121418439715, 49.79992434988179)
+SketchLine_2 = Sketch_1.addLine(-50.12121418439715, 49.79992434988179, -29.55866477541372, 23.45415791962174)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(15.42191205673757, 24.09673758865247, 34.69930212765959, 49.15734468085105)
+SketchLine_4 = Sketch_1.addLine(34.69930212765959, 49.15734468085105, 59.75990921985817, 26.02447659574467)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_5 = Sketch_2.addLine(-79.03729929078014, 52.37024302600472, -50.76379385342788, 26.6670562647754)
+SketchLine_6 = Sketch_2.addLine(-50.76379385342788, 26.6670562647754, -25.70318676122931, 53.65540236406619)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_2.addLine(13.49417304964538, 51.08508368794326, 35.98446146572105, 27.95221560283687)
+SketchLine_8 = Sketch_2.addLine(35.98446146572105, 27.95221560283687, 53.3341125295508, 47.87218534278959)
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
+Wire_3 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_6")])
+Wire_4 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_8")])
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("WIRE", "Wire_1_1"), model.selection("WIRE", "Wire_2_1")])
+Compound_2 = model.addCompound(Part_1_doc, [model.selection("WIRE", "Wire_3_1"), model.selection("WIRE", "Wire_4_1")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("COMPOUND", "Compound_1_1"), model.selection("COMPOUND", "Compound_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [16])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [32])
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-31.34514549929152, 46.39906406145125, -4.124361249906777, 13.81661018718769)
+SketchLine_2 = Sketch_1.addLine(-4.124361249906777, 13.81661018718769, 21.85911462450594, 45.98662793646056)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_3 = Sketch_2.addLine(-23.92129524945932, 7.630068312327553, -4.124361249906777, 34.02598031173091)
+SketchLine_4 = Sketch_2.addLine(-4.124361249906777, 34.02598031173091, 14.43526437467373, 6.392759937355498)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4")])
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("WIRE", "Wire_1_1"), model.selection("WIRE", "Wire_2_1")])
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [2])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [0])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [8])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [16])
+
+assert(model.checkPythonDump())
Part_1_doc = Part_1.document()
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_1 = Sketch_1.addCircle(-31.7032590051458, 14.72555746140652, 29.35516607310447)
-SketchCircle_1.result().setColor(225, 0, 0)
-SketchCircle_1.results()[1].setColor(225, 0, 0)
model.do()
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchCircle_2 = Sketch_2.addCircle(12.30017152658664, 14.37907375643225, 29.61574408620473)
-SketchCircle_2.result().setColor(225, 0, 0)
-SketchCircle_2.results()[1].setColor(225, 0, 0)
model.do()
Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")])
Smash_1 = model.addSmash(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Face_1_2")])
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "ExtrusionMax", "ExtrusionMin")
Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
SketchArc_1 = Sketch_2.addArc(10.01336797518561, 24.95055816041118, 7.898114670281987, -23.85096600991564, 58.22303946797933, 32.81761798074749, False)
-SketchArc_1.result().setColor(225, 0, 0)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_2.addLine(58.22303949051827, 32.8176179844255, 7.898114670281987, -23.85096600991564)
-SketchLine_1.result().setColor(225, 0, 0)
SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
model.do()
label="Objects"
icon=""
tooltip="Select objects"
- type_choice="edges faces solids compsolids compounds"
+ type_choice="vertices edges wires faces shells solids compsolids compounds"
use_choice="false"
concealment="true">
<validator id="FeaturesPlugin_ValidatorBooleanFuseSelection"/>
label="Main objects"
icon=""
tooltip="Select objects"
- type_choice="edges faces solids compsolids compounds"
+ type_choice="vertices edges wires faces shells solids compsolids compounds"
use_choice="false"
concealment="true">
<validator id="PartSet_DifferentObjects"/>
label="Tool objects"
icon=""
tooltip="Select tools"
- type_choice="edges faces solids compsolids compounds"
+ type_choice="vertices edges wires faces shells solids compsolids compounds"
use_choice="false"
concealment="true" >
<validator id="PartSet_DifferentObjects"/>
ParamAperture = model.addParameter(Part_1_doc, "Aperture", "360")
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchArc_1 = Sketch_1.addArc(0, 0, 0, -50, 0, 50, False)
-SketchArc_1.results()[1].setColor(225, 0, 0)
SketchLine_1 = Sketch_1.addLine(0, 50, 0, -50)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.endPoint())
