TestPipe.py
TestRecover.py
TestRecover1798.py
+ TestFillEdgeVertex.py
+ TestFillEdgeEdge.py
+ TestFillEdgeEdgeIntersected.py
+ TestFillEdgeWire.py
+ TestFillEdgeFace.py
+ TestFillEdgeShell.py
+ TestFillEdgeSolid.py
+ TestFillEdgeSolidIntersected.py
+ TestFillWireVertex.py
+ TestFillWireEdge.py
+ TestFillWireWire.py
+ TestFillWireFace.py
+ TestFillWireShell.py
+ TestFillWireSolid.py
+ TestFillFaceVertex.py
+ TestFillFaceEdge.py
+ TestFillFaceEdgeInside.py
+ TestFillFaceEdgePerpendicular.py
+ TestFillFaceWire.py
+ TestFillFaceFace.py
+ TestFillFaceShell.py
+ TestFillFaceSolid.py
+ TestFillCompFaceSolid.py
+ TestFillShellVertex.py
+ TestFillShellEdge.py
+ TestFillShellConstrPlane.py
+ TestFillShellWire.py
+ TestFillShellFace.py
+ TestFillShellShell.py
+ TestFillShellSolid.py
+ TestFillSolid2ConstructionPlanes.py
+ TestFillSolidEdge.py
+ TestFillSolidFace.py
+ TestFillSolidCompFace.py
+ TestFillSolidShell.py
+ TestFillSolidCompShell.py
+ TestPartition2Faces.py
+ TestPartition2Solids.py
+ TestPartition2Wires.py
+ TestPartitionBox4Planes.py
+ TestPartitionEdgeSolid.py
+ TestPartitionFace2Solid.py
+ TestPartitionFaceSolid.py
+ TestPartitionFaceWire.py
+ TestPartitionInclinedFaceSolid.py
+ TestPartitionWireFaceSolid.py
+ TestUnion4CurvedFaces.py
+ TestUnion4Faces.py
Test1922.py
Test1942.py
Test1915.py
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 10, 0)
model.do()
-model.testHaveNamingVertices(Extrusion_1, model, Part_1_doc)
+model.testHaveNamingSubshapes(Extrusion_1, model, Part_1_doc)
model.end()
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("COMPOUND", "Boolean_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_2, model, 1, [6], [0], [6], [22], [44])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-43.24383164005806, 13.92597968069667, 63.17997097242381, 62.8867924528302)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_2 = Sketch_2.addLine(-21.12944291883177, 24.09981691608177, 39.13933236574746, 51.82677414066782)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
+SketchLine_3 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_3.result())
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_2")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[3],[0],[0],[3],[6])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-54.08747895500726, -7.310347750362856, 54.27191756168357, 63.68373962264153)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_2 = Sketch_2.addLine(-42.46271611030479, 53.71965718432511, 14.83075791001449, -51.73354862119014)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Edge_2 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_2")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("EDGE", "Edge_2_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[2],[0],[0],[2],[4])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
+SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r"))
+SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), -50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_3")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
+SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "Box_1_1/Front&Box_1_1/Top"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "Box_1_1/Front&Box_1_1/Bottom"), False)
+SketchLine_3 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [0], [1], [2])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cone_1_1/Face_3"), 5, True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_1 = Sketch_1.addLine(-8.679188755740876, 4.967059748203267, 8.679188755740878, -4.967059748203268)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 20)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("SOLID", "Cone_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_1 = model.addPoint(Part_1_doc, 10, 10, 0)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.61369370623992, 41.69872643310781, 64.30052615729069, -35.76145957046036)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[2],[0],[0],[2],[4])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
+SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [3], [0], [0], [3], [6])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(-65.15998142235124, 15.60729985486212, 25.76227082728593, 71.65526357039188)
+SketchLine_2 = Sketch_1.addLine(25.76227082728593, 71.65526357039188, 74.75234281567489, -47.08338548621191)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(74.75234281567489, -47.08338548621191, 13.30716777939044, -81.12733381712628)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(13.30716777939044, -81.12733381712628, -65.15998142235124, 15.60729985486212)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r"))
+SketchLine_5 = Sketch_2.addLine(-53.77011318694006, -47.84888937635935, 60.89888292381829, 36.13719175945)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[2],[0],[2],[8],[16])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_1 = Sketch_1.addArc(-31.22351233671988, 15.68505079825835, -49.40058055152394, 17.44412191582002, -17.30100145268062, 27.5029960835475, True)
+SketchLine_1 = Sketch_1.addLine(-17.30100145268062, 27.5029960835475, -6.596516690856308, -20.66908563134978)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
+SketchLine_2 = Sketch_1.addLine(-6.596516690856308, -20.66908563134978, -34.74165457184325, -28.87808417997097)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(-34.74165457184325, -28.87808417997097, -49.40058055152394, 17.44412191582002)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_1r-SketchLine_2r-SketchLine_3r"))
+SketchLine_4 = Sketch_2.addLine(-17.59187701681758, -17.53169787967194, -23.97073271029336, 4.338664497959301)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), False)
+SketchLine_5 = SketchProjection_1.createdFeature()
+SketchConstraintPerpendicular_1 = Sketch_2.setPerpendicular(SketchLine_4.result(), SketchLine_5.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_4")])
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[1],[5],[10])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.76647174128943, 72.31029012920524, 42.2686420251427, 59.94944420697596)
+SketchLine_2 = Sketch_1.addLine(42.2686420251427, 59.94944420697596, 59.0507718766223, 21.43074552356853)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(59.0507718766223, 21.43074552356853, 56.1909608273397, -69.919416180974)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(56.1909608273397, -69.919416180974, -29.91225626113892, -65.09334567012574)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-29.91225626113892, -65.09334567012574, -57.18321726979322, -2.500460309588558)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(-57.18321726979322, -2.500460309588558, -27.76647174128943, 72.31029012920524)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_7 = Sketch_2.addLine(24.33758278426026, -52.48127186534471, 29.40566289183227, 59.45054433956496)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_7")])
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[1],[6],[13])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+from SketchAPI import *
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_3s-SketchLine_1e"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_1"), False)
+SketchPoint_2 = SketchProjection_3.createdFeature()
+SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-021, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_6 = SketchProjection_4.createdFeature()
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_6.result(), [SketchArc_2.results()[1]])
+[SketchArc_3] = SketchConstraintMirror_1.mirrored()
+SketchLine_7 = Sketch_2.addLine(-31.79164821526215, 49.99496405877289, -27.24680168984479, -49.85269382803261)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchAPI_Arc(SketchArc_3).endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchAPI_Arc(SketchArc_3).startPoint(), SketchLine_7.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchArc_1_2f")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_4f-SketchLine_5f-SketchArc_2_2f")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchArc_3_2f-SketchLine_7r")])
+Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("FACE", "Face_1_1")], model.selection("FACE", "PartSet/XOZ"))
+Recover_1 = model.addRecover(Part_1_doc, Symmetry_1, [Face_1.result()])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Recover_1_1")], [model.selection("FACE", "Face_2_1")])
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("FACE", "Symmetry_1_1")], [model.selection("FACE", "Face_3_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [2], [0], [2], [6], [12])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.checkBooleansResult(Boolean_2, model, 1, [0], [0], [1], [5], [10])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13r-SketchLine_14r-SketchLine_15r-SketchLine_16f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_3_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [3], [0], [3], [14], [28])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [4], [0], [4], [15], [30])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_2 = model.addPoint(Part_1_doc, 22, 33, 0)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(80.77068214804063, 60.54136429608128, -35.9143686502177, 60.54136429608128)
+SketchLine_2 = Sketch_1.addLine(-35.9143686502177, 60.54136429608128, -35.9143686502177, -37.67343976777939)
+SketchLine_3 = Sketch_1.addLine(-35.9143686502177, -37.67343976777939, 80.77068214804063, -37.67343976777939)
+SketchLine_4 = Sketch_1.addLine(80.77068214804063, -37.67343976777939, 80.77068214804063, 60.54136429608128)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[1],[4],[9])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_1"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_6 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchArc_1_2f")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_9f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [1], [4], [9])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), -50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "PartSet/XOZ")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[3],[12],[24])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_1.addArc(28.24683132290313, 24.84281403912743, 0, 50, 56.77054208906745, 0, False)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchArc_1.startPoint(), SketchAPI_Line(SketchLine_1).startPoint(), -50)
+SketchArc_2 = Sketch_1.addArc(38.14157263904823, 16.22495851193372, 56.77054208906745, 0, 34.15529753265601, 40.60522496371553, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 70, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_3 = Sketch_2.addLine(-64.49168769733997, 17.16789081864163, 146.7677170722727, 22.9901626941168)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_3")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[2],[8],[18])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13r-SketchLine_14r-SketchLine_15r-SketchLine_16f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("FACE", "Face_3_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [2], [12], [24])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_7 = Sketch_2.addLine(50, 15.56025031353752, 50, -15.54016280334104)
+SketchLine_8 = Sketch_2.addLine(50, -15.54016280334104, 36.52981427174974, 0)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(36.52981427174974, 0, 50, 15.56025031353752)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_10.endPoint())
+SketchLine_11 = Sketch_2.addLine(50, 15.56025031353752, 71.21320343559643, 0)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_11.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_4s-SketchLine_3e"), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
+SketchLine_12 = Sketch_2.addLine(71.21320343559643, 0, 50, -15.54016280334104)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_12.endPoint())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_9).startPoint(), SketchLine_7.result(), "D", True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
+Face_3 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_7r-SketchLine_8r-SketchLine_10r")])
+Face_4 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_7f-SketchLine_11r-SketchLine_12r")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Shell_2 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_3_1"), model.selection("FACE", "Face_4_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SHELL", "Shell_2_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [3], [11], [22])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Boolean_1_1_2"), model.selection("FACE", "Boolean_1_1_1")])
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_2, model, 1, [0], [0], [6], [22], [44])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_1 = Sketch_1.addArc(9.761379814097372, -58.25586643592183, 0, 0, -48.40807467084933, -47.99209154562215, False)
+SketchArc_2 = Sketch_1.addArc(-12.6706171814691, -54.29782746957817, -48.40807467084933, -47.99209154562215, 12.46009047944227, -80.47750863283412, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchArc_2_2")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 50, 0)
+Shell_1 = model.addShell(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")])
+Point_2 = model.addPoint(Part_1_doc, 0, 0, 10)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[2],[9],[18])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13r-SketchLine_14r-SketchLine_15r-SketchLine_16f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], [model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [2], [10], [22])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Cone_1_1")], [model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[4],[4],[20],[72],[144])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "Boolean_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_2, model, 1, [0], [1], [9], [46], [92])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Boolean_1_1_2"), model.selection("FACE", "Boolean_1_1_1")])
+MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SHELL", "Shell_1_1")], model.selection("EDGE", "PartSet/OZ"), 1, 3)
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_2, model, 1, [0], [1], [15], [90], [180])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Box_1_1/Front"))
+SketchLine_1 = Sketch_1.addLine(4, 10, 7, 0)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "Box_1_1/Front&Box_1_1/Top"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "Box_1_1/Front&Box_1_1/Bottom"), False)
+SketchLine_3 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [1], [7], [30], [60])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [1], [8], [39], [78])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Left"), "Shift", True)
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("FACE", "Face_1_1")], [model.selection("FACE", "Plane_2")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Boolean_1_1_2"), model.selection("FACE", "Boolean_1_1_1")])
+Boolean_2 = model.addFill(Part_1_doc, [model.selection("SOLID", "Box_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_2, model, 1, [0], [1], [9], [46], [92])
+model.testHaveNamingSubshapes(Boolean_2, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-67.57764876632801, 2.198838896952097, 88.39332365747461, 44.12336719883891)
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_2 = Sketch_2.addLine(-40.60522496371553, -29.75761973875181, -38.84615384615385, 66.99129172714079)
+SketchLine_3 = Sketch_2.addLine(-38.84615384615385, 66.99129172714079, 50.86647314949202, 73.4412191582003)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_2.addLine(50.86647314949202, 73.4412191582003, 55.26415094339622, -34.15529753265602)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_2.addLine(55.26415094339622, -34.15529753265602, -40.60522496371553, -29.75761973875181)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[0],[6],[12])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(29.74624907439609, 30.07487215963349, 31.08202242513997, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_1"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(31.08202242513997, 0, 45.45797599933665, 0)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_6 = SketchProjection_3.createdFeature()
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+SketchLine_7 = Sketch_2.addLine(45.45797599933665, 0, 45.83553599350717, -22.747645239555)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(45.83553599350717, -22.747645239555, 70.40999925541598, 30.039147749218)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(70.40999925541598, 30.039147749218, 29.74624907439609, 30.07487215963349)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_4.startPoint(), SketchLine_9.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchArc_1_2f")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchLine_8f-SketchLine_9f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [0], [6], [12])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "D", "50")
+model.addParameter(Part_1_doc, "L", "30")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 28.78679656440358, 21.21320343559643, 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(21.21320343559643, 50, 0, 71.21320343559643)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_2.result())
+SketchLine_4 = Sketch_1.addLine(0, 71.21320343559643, -21.21320343559642, 50)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-21.21320343559642, 50, 0, 28.78679656440358)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+SketchLine_6 = Sketch_1.addLine(-21.21320343559642, 50, 21.21320343559643, 50)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.endPoint())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_6.result(), "D", True)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "L")
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_3.result())
+SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintEqual_3 = Sketch_1.setEqual(SketchLine_4.result(), SketchLine_5.result())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_1.result(), SketchLine_3.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchLine_7 = Sketch_2.addLine(50, -39.61510263929618, 50, 43.87280058651025)
+SketchLine_7.setName("SketchLine_8")
+SketchLine_7.result().setName("SketchLine_8")
+SketchLine_7.setAuxiliary(True)
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_7.result())
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_7.result(), "D", True)
+SketchLine_8 = Sketch_2.addLine(57.5, 0, 65, -10.81485284151855)
+SketchLine_8.setName("SketchLine_9")
+SketchLine_8.result().setName("SketchLine_9")
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchLine_9.setName("SketchLine_10")
+SketchLine_9.result().setName("SketchLine_10")
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(65, -10.81485284151855, 65, 11.50710132369052)
+SketchLine_10.setName("SketchLine_11")
+SketchLine_10.result().setName("SketchLine_11")
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
+SketchLine_11 = Sketch_2.addLine(65, 11.50710132369052, 50, 11.50710132369052)
+SketchLine_11.setName("SketchLine_12")
+SketchLine_11.result().setName("SketchLine_12")
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_7.result())
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_8.startPoint(), SketchLine_7.result(), "L/4", True)
+SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_8.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_10.endPoint(), SketchLine_7.result(), "L/2", True)
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintMirror_1_objects = [SketchLine_8.result(), SketchLine_10.result(), SketchLine_11.result()]
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_7.result(), SketchConstraintMirror_1_objects)
+[SketchLine_12, SketchLine_13, SketchLine_14] = SketchConstraintMirror_1.mirrored()
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchLine_13.setName("SketchLine_14")
+SketchLine_13.result().setName("SketchLine_14")
+SketchLine_12.setName("SketchLine_13")
+SketchLine_12.result().setName("SketchLine_13")
+SketchLine_15 = Sketch_2.addLine(42.5, 0, 57.5, 0)
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_12).startPoint(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_8.startPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_5f-SketchLine_6r")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_3f-SketchLine_4f-SketchLine_6f")])
+Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13r-SketchLine_14r-SketchLine_15r-SketchLine_16f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SHELL", "Shell_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [0], [10], [20])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "L", "10")
+model.addParameter(Part_1_doc, "Shift", "5")
+Box_1 = model.addBox(Part_1_doc, "L", "L", "L")
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_1_1/Bottom"), "Shift", True)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 11.4564392373896, -5, 0, -12.5, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(11.4564392373896, -5, 0, 5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(0, 5, 0, -12.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "L+Shift/2")
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_2.startPoint(), -5)
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_3.startPoint(), "Shift", True)
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2f-SketchLine_2f-SketchLine_3f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [0], [9], [18])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Point_2 = model.addPoint(Part_1_doc, 10, 10, 0)
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Point_1")])
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-27.43492861072797, 41.55044273324706, 64.29883100829633, -35.76346801736826)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Point_1"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchAPI_Point(SketchPoint_1).coordinates())
+SketchLine_2 = Sketch_1.addLine(64.5972559141328, -34.82170453629492, 63.39686648861513, 69.37209759863701)
+SketchLine_3 = Sketch_1.addLine(63.39686648861513, 69.37209759863701, -27.43492861072797, 41.55044273324706)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("VERTEX", "Vertex_1_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1,model,1,[0],[0],[0],[4],[8])
+model.testHaveNamingSubshapes(Boolean_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "R", "50")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-49.81325699578132, 35.39936274902501, 0, 8.200436015051352)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(0, 8.200436015051352, 49.94978427678259, 33.32234621934526)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchArc_1 = Sketch_1.addArc(0, 31.08202242513997, 49.94978427678259, 33.32234621934526, -49.81325699578132, 35.39936274902501, False)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_2.result())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_4 = Sketch_2.addLine(31.79164821526215, 49.99496405877289, 8.200436015051352, 0)
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_3s-SketchLine_1e"), False)
+SketchPoint_1 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchPoint_1.result())
+SketchLine_5 = Sketch_2.addLine(8.200436015051352, 0, 27.24680168984479, -49.85269382803262)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchArc_1"), False)
+SketchPoint_2 = SketchProjection_3.createdFeature()
+SketchArc_2 = Sketch_2.addArc(31.08202242513997, 1.147024884467139e-021, 27.24680168984479, -49.85269382803262, 31.79164821526215, 49.99496405877289, False)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchArc_2.center())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], "R")
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchArc_1_2f")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_4f-SketchLine_5f-SketchArc_2_2f")])
+Boolean_1 = model.addFill(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], [model.selection("WIRE", "Wire_2_1")])
+model.do()
+
+model.checkBooleansResult(Boolean_1, model, 1, [0], [0], [0], [4], [8])
+model.testHaveNamingSubshapes(Boolean_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(55.40972222222221, 31.70277777777777, -46.71249999999999, 31.70277777777777)
+SketchLine_2 = Sketch_1.addLine(-46.71249999999999, 31.70277777777777, -46.71249999999999, -45.44999999999999)
+SketchLine_3 = Sketch_1.addLine(-46.71249999999999, -45.44999999999999, 55.40972222222221, -45.44999999999999)
+SketchLine_4 = Sketch_1.addLine(55.40972222222221, -45.44999999999999, 55.40972222222221, 31.70277777777777)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_2.addCircle(64.38749999999999, 45.44999999999999, 41.86298795836804)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("FACE", "Face_2_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[3],[0],[3],[12],[24])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+from GeomAPI import GeomAPI_Shape
+
+model.begin()
+#Create part
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+#Create Sketch_1 - closed polyline from 5 segments
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-43.90694444444443, 28.05555555555554, 19.21805555555554, 72.66388888888889)
+SketchLine_2 = Sketch_1.addLine(19.21805555555554, 72.66388888888889, 82.06249999999999, -36.19166666666666)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(82.06249999999999, -36.19166666666666, 19.4986111111111, -81.3611111111111)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(19.4986111111111, -81.3611111111111, -45.87083333333333, -45.44999999999999)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-45.87083333333333, -45.44999999999999, -43.90694444444443, 28.05555555555554)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.endPoint())
+model.do()
+#Create Extrusion_1 on Sketch_1
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r")], model.selection(), 100, 0)
+#Create Sketch_2 from 5 segments
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
+SketchLine_6 = Sketch_2.addLine(74.07000206783135, -18.10965884648514, 62.37497281453477, -31.70853007124862)
+SketchLine_7 = Sketch_2.addLine(62.37497281453477, -31.70853007124862, 37.35304976096997, -31.43655264675337)
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(37.35304976096997, -31.43655264675337, 25.65802050767337, -1.791013376768974)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(25.65802050767337, -1.791013376768974, 69.44638585141178, 6.640286782584385)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchLine_10 = Sketch_2.addLine(69.44638585141178, 6.640286782584385, 74.07000206783135, -18.10965884648514)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchLine_10.endPoint())
+model.do()
+#Create Extrusion_2 on Sketch_2
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchLine_9r-SketchLine_10r")], model.selection(), 10, 160)
+#Create Partition on objects Extrusion_1 and Extrusion_2
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[4],[4],[33],[150],[300])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-59.3375, 27.49444444444443, -20.05972222222222, 71.26111111111109)
+SketchLine_2 = Sketch_1.addLine(-20.05972222222222, 71.26111111111109, 31.5625, 60.31944444444444)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(31.5625, 60.31944444444444, 48.95694444444444, -41.52222222222221)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(48.95694444444444, -41.52222222222221, -7.434722222222216, -63.6861111111111)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-7.434722222222216, -63.6861111111111, -12.20416666666666, 3.0861111111111)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(-12.20416666666666, 3.0861111111111, -59.3375, 27.49444444444443)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchArc_1 = Sketch_2.addArc(-25.27347239223771, 29.23826809458483, -58.42699662355402, 67.59234514649975, 1.894762451441686, -13.56451698932517, False)
+SketchLine_7 = Sketch_2.addLine(-58.42699662355402, 67.59234514649975, 66.71130562210065, 43.53978835123107)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchArc_1.startPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(66.71130562210065, 43.53978835123107, 30.30743587791019, -67.62202818906478)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(30.30743587791019, -67.62202818906478, 1.894762451441686, -13.56451698932518)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_9.endPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_2/Edge-SketchArc_1_2")])
+Wire_2 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_6")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("WIRE", "Wire_2_1"), model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[2],[0],[0],[22],[44])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Box_1 = model.addBox(Part_1_doc, 100, 100, 400)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 100, False)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), 100, False)
+Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 100, False)
+Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 50, False)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_1"), model.selection("FACE", "Plane_2"), model.selection("FACE", "Plane_3"), model.selection("FACE", "Plane_4"), model.selection("SOLID", "Box_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[8],[8],[48],[192],[384])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 5, 10)
+Point_1 = model.addPoint(Part_1_doc, 4, 5, 11)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OX"), model.selection("VERTEX", "Point_1"), False)
+Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_1 = Sketch_1.addLine(1.156555510724249, 12.03812858614785, 0.5812800089239156, -4.87167684997945)
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Cone_1_1"), model.selection("EDGE", "Edge_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[3],[1],[3],[9],[20])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+from SketchAPI import *
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, -23.6272731038225, 7.84836794507966, 9.071298990348682, 0, 10, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.center())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.endPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchArc_2 = Sketch_1.addArc(5.671059039631239, 0, 7.84836794507966, 9.071298990348682, 15, 0, True)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_2.center())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_2.endPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchArc_2.endPoint(), 15, True)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_2).startPoint(), SketchArc_1.endPoint(), 10, True)
+SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_2.result(), [SketchArc_2.results()[1], SketchArc_1.results()[1]])
+[SketchArc_3, SketchArc_4] = SketchConstraintMirror_1.mirrored()
+SketchConstraintMirror_2_objects = [SketchArc_1.results()[1], SketchArc_2.results()[1], SketchArc_3.results()[1], SketchArc_4.results()[1]]
+SketchConstraintMirror_2 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_2_objects)
+[SketchArc_5, SketchArc_6, SketchArc_7, SketchArc_8] = SketchConstraintMirror_2.mirrored()
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 12, 12)
+
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
+SketchLine_3 = Sketch_2.addLine(7.498934040825037, 4.111344571723496, -7.530337532973568, 4.111344571723496)
+SketchLine_4 = Sketch_2.addLine(-7.530337532973568, 4.111344571723496, -7.530337532973568, -4.489390918751097)
+SketchLine_5 = Sketch_2.addLine(-7.530337532973568, -4.489390918751097, 7.498934040825037, -4.489390918751097)
+SketchLine_6 = Sketch_2.addLine(7.498934040825037, -4.489390918751097, 7.498934040825037, 4.111344571723496)
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintHorizontal_1 = Sketch_2.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_1 = Sketch_2.setVertical(SketchLine_4.result())
+SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_2 = Sketch_2.setVertical(SketchLine_6.result())
+SketchCircle_1 = Sketch_2.addCircle(-0.133117930244568, 0.08984026389066591, 1.099112071963378)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchCircle_1_2r")], model.selection(), model.selection(), 5, model.selection(), 10)
+
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_7 = Sketch_3.addLine(21.55890075100801, 30.21822825485694, -17.43219636481839, 31.63011070278906)
+SketchLine_8 = Sketch_3.addLine(-17.43219636481839, 31.63011070278906, -12.33809712604348, -45.93749869468675)
+SketchConstraintCoincidence_10 = Sketch_3.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_3.addLine(-12.33809712604348, -45.93749869468675, 30.10255255530162, -25.9120009302625)
+SketchConstraintCoincidence_11 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchLine_10 = Sketch_3.addLine(30.10255255530162, -25.9120009302625, 21.55890075100801, 30.21822825485694)
+SketchConstraintCoincidence_12 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_7.startPoint(), SketchLine_10.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_3/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_3/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_3/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_3/Edge-SketchLine_10")])
+
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[2],[4],[42],[198],[396])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(29.00299588076832, 85.46917598420691, 38.5336063380206, 85.46917598420691)
+SketchLine_2 = Sketch_1.addLine(38.5336063380206, 85.46917598420691, 51.24108694769031, 59.52473640613128)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(51.24108694769031, 59.52473640613128, 51.24108694769031, 20.87281621838598)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(51.24108694769031, 20.87281621838598, 74.53813473208469, 20.87281621838598)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(74.53813473208469, 20.87281621838598, 74.53813473208469, 7.635857249980032)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(74.53813473208469, 7.635857249980032, 29.00299588076832, 7.635857249980032)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(29.00299588076832, 7.635857249980032, 29.00299588076832, 85.46917598420691)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_7.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_1.result())
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r-SketchLine_7r")], model.selection("EDGE", "PartSet/OZ"), 180, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/To_Face_1"))
+SketchLine_8 = Sketch_2.addLine(61.72045613220821, 51.92790864086226, -64.56856594464165, 51.92790864086226)
+SketchLine_9 = Sketch_2.addLine(-64.56856594464165, 51.92790864086226, -64.56856594464165, -5.323114700643004)
+SketchLine_10 = Sketch_2.addLine(-64.56856594464165, -5.323114700643004, 61.72045613220821, -5.323114700643004)
+SketchLine_11 = Sketch_2.addLine(61.72045613220821, -5.323114700643004, 61.72045613220821, 51.92790864086226)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_10.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_11.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_11"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_10"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_9")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Revolution_1_1"), model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[4],[1],[16],[82],[164])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_1 = Sketch_1.addArc(-27.59408640325028, 19.28272273466096, -69.22045455254333, 36.34312971236017, -20.39867310978187, 63.6903576534723, True)
+SketchLine_1 = Sketch_1.addLine(-20.39867310978187, 63.6903576534723, 50.06261173489778, 52.27344552622073)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
+SketchLine_2 = Sketch_1.addLine(50.06261173489778, 52.27344552622073, 61.51017441860466, -50.20639534883721)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(61.51017441860466, -50.20639534883721, -40.37063953488371, -58.72093023255813)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(-40.37063953488371, -58.72093023255813, -8.587370006050145, 0.9678324888285939)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-8.587370006050145, 0.9678324888285939, -69.22045455254333, 36.34312971236017)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_5.endPoint())
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchArc_2 = Sketch_2.addArc(25.75044090453202, 23.87245760846999, -31.39978593836629, 46.7325483456293, 20.55274339063303, 85.20528827247816, True)
+SketchLine_6 = Sketch_2.addLine(20.55274339063303, 85.20528827247816, 74.86874397491491, -32.65992894423484)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_2.addLine(74.86874397491491, -32.65992894423484, 9.995513504597909, -67.56790534016733)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(9.995513504597909, -67.56790534016733, -36.0335881148175, -7.328477046301525)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(-36.0335881148175, -7.328477046301525, -31.39978593836629, 46.7325483456293)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchArc_2.startPoint(), SketchLine_9.endPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5")])
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_2/Edge-SketchArc_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_6"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_8")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[6],[0],[5],[39],[78])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchCircle_1 = Sketch_1.addCircle(-18.11540697674418, -21.53002906976744, 69.96519983648402)
+SketchCircle_2 = Sketch_1.addCircle(-18.11540697674418, -21.53002906976744, 31.60961705559024)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2f-SketchCircle_2_2r")], model.selection(), 100, 0)
+Point_2 = model.addPoint(Part_1_doc, 100, 40, 80)
+Point_3 = model.addPoint(Part_1_doc, 100, -40, 80)
+Point_4 = model.addPoint(Part_1_doc, 20, 40, -80)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "Point_1"), model.selection("VERTEX", "Point_2"), model.selection("VERTEX", "Point_3"))
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
+SketchLine_1 = Sketch_2.addLine(98.50650093667804, 100.9440062780326, 111.3990833103819, -44.73923695837706)
+SketchLine_2 = Sketch_2.addLine(111.3990833103819, -44.73923695837706, -130.2032518739455, -87.67357443122384)
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_2.addLine(-130.2032518739455, -87.67357443122384, -102.5665996005733, 115.6113578178721)
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_2.addLine(-102.5665996005733, 115.6113578178721, 98.50650093667804, 100.9440062780326)
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("FACE", "Face_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[3],[2],[10],[30],[60])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Torus_1 = model.addTorus(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 15, 3)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(-6.378039652249388, 16.497623739925, 8.984305600666083, -24.54329369827008)
+SketchLine_2 = Sketch_1.addLine(8.984305600666083, -24.54329369827008, 36.73713621773835, -5.929982231235201)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(36.73713621773835, -5.929982231235201, 19.18554250372658, 21.11854572580065)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(19.18554250372658, 21.11854572580065, -6.378039652249388, 16.497623739925)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
+SketchCircle_1 = Sketch_1.addCircle(14.49765103937751, 9.678507230150521, 3.831444106492329)
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchCircle_1_2")])
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_5 = Sketch_2.addLine(-15.11211565655763, 11.99814589971457, -14.79635576556081, -11.77064279967296)
+SketchLine_6 = Sketch_2.addLine(-14.79635576556081, -11.77064279967296, -3.043616368139293, -11.46189011940212)
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_2.addLine(-3.043616368139293, -11.46189011940212, -3.922197168000547, 15.83568871823551)
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(-3.922197168000547, 15.83568871823551, -15.11211565655763, 11.99814589971457)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_8.endPoint())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_8"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_6"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_7")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_1_1"), model.selection("SOLID", "Torus_1_1"), model.selection("WIRE", "Wire_1_1")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[3],[1],[4],[22],[46])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 14.26163338647443, -11.82948087533604, 14.26163338647443, 11.82948087533609, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.center())
+SketchLine_1 = Sketch_1.addLine(14.26163338647443, -11.82948087533604, 14.26163338647443, 11.82948087533609)
+SketchLine_1.setAuxiliary(True)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
+model.do()
+Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchArc_1_2")])
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OY"), 360, 0)
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "PartSet/YOZ"), model.selection("FACE", "PartSet/XOZ"), model.selection("FACE", "PartSet/XOY"), model.selection("FACE", "Revolution_1_1")])
+Union_1 = model.addUnion(Part_1_doc, [model.selection("FACE", "Partition_1_1_3"), model.selection("FACE", "Partition_1_1_2"), model.selection("FACE", "Partition_1_1_8"), model.selection("FACE", "Partition_1_1_7")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[8],[0],[8],[32],[64])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
--- /dev/null
+## Copyright (C) 2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-44.48110465116279, 12.33139534883721, -38.60901162790698, 48.15116279069767)
+SketchLine_2 = Sketch_1.addLine(-38.60901162790698, 48.15116279069767, 16.88226744186047, 78.68604651162791)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchLine_3 = Sketch_1.addLine(16.88226744186047, 78.68604651162791, 48.29796511627906, 10.86337209302326)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(48.29796511627906, 10.86337209302326, 31.85610465116278, -38.16860465116279)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(31.85610465116278, -38.16860465116279, -44.48110465116279, 12.33139534883721)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_1.startPoint())
+model.do()
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r"))
+SketchLine_6 = Sketch_2.addLine(31.85610465116278, -38.16860465116279, -40.43276493886778, -56.03425756438362)
+SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.startPoint(), SketchPoint_1.result())
+SketchLine_7 = Sketch_2.addLine(-40.43276493886778, -56.03425756438362, -115.5003601973775, -26.06900348999911)
+SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchLine_8 = Sketch_2.addLine(-115.5003601973775, -26.06900348999911, -106.2327558444751, 34.47934494896344)
+SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchLine_9 = Sketch_2.addLine(-106.2327558444751, 34.47934494896344, -44.48110465116279, 12.33139534883721)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_5e"), False)
+SketchPoint_2 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchPoint_2.result())
+model.do()
+Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5")])
+Face_2 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_6"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_7"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_8")])
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Face_2_1"), model.selection("FACE", "Face_1_1"), model.selection("FACE", "PartSet/YOZ")])
+Union_1 = model.addUnion(Part_1_doc, [model.selection("FACE", "Partition_1_1_1"), model.selection("FACE", "Partition_1_1_3"), model.selection("FACE", "Partition_1_1_4")])
+model.do()
+
+model.checkBooleansResult(Partition_1,model,1,[4],[0],[4],[18],[36])
+model.testHaveNamingSubshapes(Partition_1,model,Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
assert(shape.isEdge())
assert(name != ""), "String empty"
-def testHaveNamingVertices(theFeature, theModel, thePartDoc) :
- """ Tests if all vertices of result have a unique name
+def testHaveNamingByType(theFeature, theModel, thePartDoc, theSubshapeType) :
+ """ Tests if all sub-shapes of result have a unique name
:param theFeature: feature to test.
+ :param theSubshapeType: type of sub-shape
"""
- # Get feature result/sub-result
- aResult = theFeature.results()[0].resultSubShapePair()[0]
- # Get result/sub-result shape
- shape = aResult.shape()
- # Create shape explorer with desired shape type
- shapeExplorer = GeomAPI_ShapeExplorer(shape, GeomAPI_Shape.VERTEX)
- # Create list, and store selections in it
+ aFirstRes = theFeature.results()[0]
+ # Get number of sub-results
+ hasSubs = True
+ nbSubs = aFirstRes.numberOfSubs()
+ if nbSubs == 0:
+ # no sub-results => treat current result as a sub
+ hasSubs = False
+ nbSubs = 1
+
selectionList = []
shapesList = [] # to append only unique shapes (not isSame)
- while shapeExplorer.more():
- aDuplicate = False
- for alreadyThere in shapesList:
- if alreadyThere.isSame(shapeExplorer.current()):
- aDuplicate = True
- if aDuplicate:
+ for sub in range(0, nbSubs):
+ # Get feature result/sub-result
+ if hasSubs:
+ aResult = aFirstRes.subResult(sub).resultSubShapePair()[0]
+ else:
+ aResult = aFirstRes.resultSubShapePair()[0]
+ # Get result/sub-result shape
+ shape = aResult.shape()
+ # Create shape explorer with desired shape type
+ shapeExplorer = GeomAPI_ShapeExplorer(shape, theSubshapeType)
+ # Create list, and store selections in it
+ while shapeExplorer.more():
+ aDuplicate = False
+ for alreadyThere in shapesList:
+ if alreadyThere.isSame(shapeExplorer.current()):
+ aDuplicate = True
+ if aDuplicate:
+ shapeExplorer.next()
+ continue
+ shapesList.append(shapeExplorer.current())
+ selection = theModel.selection(aResult, shapeExplorer.current()) # First argument should be result/sub-result, second is sub-shape on this result/sub-result
+ selectionList.append(selection)
shapeExplorer.next()
- continue
- shapesList.append(shapeExplorer.current())
- selection = theModel.selection(aResult, shapeExplorer.current()) # First argument should be result/sub-result, second is sub-shape on this result/sub-result
- selectionList.append(selection)
- shapeExplorer.next()
# Create group with this selection list
Group_1 = theModel.addGroup(thePartDoc, selectionList)
theModel.do()
attrSelection = groupSelectionList.value(index)
shape = attrSelection.value()
name = attrSelection.namingName()
- assert(shape.isVertex())
+ if theSubshapeType == GeomAPI_Shape.VERTEX:
+ assert(shape.isVertex())
+ elif theSubshapeType == GeomAPI_Shape.EDGE:
+ assert(shape.isEdge())
+ elif theSubshapeType == GeomAPI_Shape.FACE:
+ assert(shape.isFace())
assert(name != ""), "String empty"
presented_names.add(name)
assert(len(presented_names) == groupSelectionList.size()), "Some names are not unique"
+def testHaveNamingSubshapes(theFeature, theModel, thePartDoc) :
+ """ Tests if all vertices/edges/faces of result have a unique name
+ :param theFeature: feature to test.
+ """
+ testHaveNamingByType(theFeature, theModel, thePartDoc, GeomAPI_Shape.VERTEX)
+ testHaveNamingByType(theFeature, theModel, thePartDoc, GeomAPI_Shape.EDGE)
+ testHaveNamingByType(theFeature, theModel, thePartDoc, GeomAPI_Shape.FACE)
def testNbSubFeatures(theComposite, theKindOfSub, theExpectedCount):
""" Tests number of sub-features of the given type
""" Tests numbers of sub-shapes in results (used in Boolean operations tests)
"""
theModel.testNbResults(theFeature, NbRes)
- theModel.testNbSubResults(theFeature,NbSubRes)
- theModel.testNbSubShapes(theFeature, GeomAPI_Shape.SOLID, NbSolid )
+ theModel.testNbSubResults(theFeature, NbSubRes)
+ theModel.testNbSubShapes(theFeature, GeomAPI_Shape.SOLID, NbSolid)
theModel.testNbSubShapes(theFeature, GeomAPI_Shape.FACE, NbFace)
theModel.testNbSubShapes(theFeature, GeomAPI_Shape.EDGE, NbEdge)
theModel.testNbSubShapes(theFeature, GeomAPI_Shape.VERTEX, NbVertex)
