[bos #30178] [CEA][FORUM] Fuse operation fails on Linux and is OK on Windows

diff --git a/src/FeaturesPlugin/Test/Test20245_3.py b/src/FeaturesPlugin/Test/Test20245_3.py
index 78793a8dc04b73ea46d7f66d15c7566140ccc385..937a62c192816d19d2c2d960dd35dcb827468a85 100644 (file)
--- a/src/FeaturesPlugin/Test/Test20245_3.py
+++ b/src/FeaturesPlugin/Test/Test20245_3.py
@@ -1334,4 +1334,6 @@ model.testNbSubShapes(Split_6, GeomAPI_Shape.EDGE, [3636])
 model.testNbSubShapes(Split_6, GeomAPI_Shape.VERTEX, [7272])
 model.testResultsVolumes(Split_6, [612.72746616262998])
 
-assert(model.checkPythonDump())
+# After fixing bos #30178 with OCCT 33006: loading GEOMETRICAL dump gives different result (differ names of the same entities)
+#assert(model.checkPythonDump())
+assert(model.checkPythonDump(model.ModelHighAPI.CHECK_NAMING))

diff --git a/src/FeaturesPlugin/Test/Test20245_3_geometrical.py b/src/FeaturesPlugin/Test/Test20245_3_geometrical.py
new file mode 100644 (file)
index 0000000..c8c146f
--- /dev/null
+++ b/src/FeaturesPlugin/Test/Test20245_3_geometrical.py
@@ -0,0 +1,1337 @@
+# Copyright (C) 2020-2022  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+
+### Create Part
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+### Create Sketch
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+
+### Create SketchLine
+SketchLine_1 = Sketch_1.addLine(6.188000000000001, 9.028, 6.188000000000001, -3.45)
+
+### Create SketchLine
+SketchLine_2 = Sketch_1.addLine(6.188000000000001, -3.45, 0, -3.45)
+Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+
+### Create SketchLine
+SketchLine_3 = Sketch_1.addLine(0, -3.45, 0, -6.45)
+Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+
+### Create SketchLine
+SketchLine_4 = Sketch_1.addLine(0, -6.45, 7.781999999999999, -6.45)
+Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+
+### Create SketchLine
+SketchLine_5 = Sketch_1.addLine(7.781999999999999, -6.45, 7.781999999999999, -3.45)
+Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+
+### Create SketchLine
+SketchLine_6 = Sketch_1.addLine(7.781999999999999, -3.45, 6.538000000000001, -3.45)
+Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+
+### Create SketchLine
+SketchLine_7 = Sketch_1.addLine(6.538000000000001, -3.45, 6.538000000000002, -2.4)
+Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+
+### Create SketchLine
+SketchLine_8 = Sketch_1.addLine(6.538000000000002, -2.4, 6.376, -2.25)
+Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+
+### Create SketchLine
+SketchLine_9 = Sketch_1.addLine(6.376, -2.25, 6.375999999999999, 9.028)
+Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+
+### Create SketchLine
+SketchLine_10 = Sketch_1.addLine(6.375999999999999, 9.028, 6.188000000000001, 9.028)
+SketchLine_10.setAuxiliary(True)
+Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.endPoint())
+Sketch_1.setHorizontal(SketchLine_10.result())
+Sketch_1.setVertical(SketchLine_1.result())
+Sketch_1.setVertical(SketchLine_9.result())
+Sketch_1.setVertical(SketchLine_3.result())
+Sketch_1.setVertical(SketchLine_5.result())
+Sketch_1.setHorizontal(SketchLine_2.result())
+Sketch_1.setHorizontal(SketchLine_6.result())
+Sketch_1.setHorizontal(SketchLine_4.result())
+Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchLine_2.result())
+
+### Create SketchProjection
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_11 = SketchProjection_1.createdFeature()
+Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_11.result())
+Sketch_1.setLength(SketchLine_5.result(), 3)
+Sketch_1.setDistance(SketchAPI_Line(SketchLine_11).startPoint(), SketchLine_1.result(), 6.188, True)
+Sketch_1.setVertical(SketchLine_7.result())
+
+### Create SketchProjection
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_12 = SketchProjection_2.createdFeature()
+Sketch_1.setDistance(SketchLine_9.endPoint(), SketchLine_12.result(), 9.028, True)
+Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), 0.188, True)
+Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_7.result(), 0.35, True)
+Sketch_1.setVerticalDistance(SketchLine_7.endPoint(), SketchLine_8.endPoint(), 0.15)
+Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_12.result(), 3.45, True)
+Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_12.result(), 2.25, True)
+
+### Create SketchLine
+SketchLine_13 = Sketch_1.addLine(7.031999999999999, -4.05, 5.531999999999999, -4.05)
+
+### Create SketchLine
+SketchLine_14 = Sketch_1.addLine(5.531999999999999, -4.05, 5.531999999999999, -5.850000000000001)
+
+### Create SketchLine
+SketchLine_15 = Sketch_1.addLine(5.531999999999999, -5.850000000000001, 7.031999999999999, -5.850000000000001)
+
+### Create SketchLine
+SketchLine_16 = Sketch_1.addLine(7.031999999999999, -5.850000000000001, 7.031999999999999, -4.05)
+Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
+Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
+Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
+Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
+Sketch_1.setHorizontal(SketchLine_13.result())
+Sketch_1.setVertical(SketchLine_14.result())
+Sketch_1.setHorizontal(SketchLine_15.result())
+Sketch_1.setVertical(SketchLine_16.result())
+Sketch_1.setLength(SketchLine_14.result(), 1.8)
+Sketch_1.setLength(SketchLine_15.result(), 1.5)
+
+### Create SketchLine
+SketchLine_17 = Sketch_1.addLine(6.281999999999999, -4.050000000000001, 6.281999999999999, 9.028000000000002)
+SketchLine_17.setAuxiliary(True)
+Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_13.result())
+Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_10.result())
+Sketch_1.setVertical(SketchLine_17.result())
+Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_13.result())
+Sketch_1.setDistance(SketchLine_17.startPoint(), SketchLine_5.result(), 1.5, True)
+Sketch_1.setMiddlePoint(SketchLine_10.result(), SketchLine_17.endPoint())
+Sketch_1.setDistance(SketchLine_14.startPoint(), SketchLine_2.result(), 0.6, True)
+
+### Create SketchLine
+SketchLine_18 = Sketch_1.addLine(6.375999999999999, 9.028, 6.534999999999997, 9.186999999999999)
+Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_18.startPoint())
+
+### Create SketchLine
+SketchLine_19 = Sketch_1.addLine(6.534999999999997, 9.186999999999999, 6.534999999999997, 10.256)
+Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
+
+### Create SketchLine
+SketchLine_20 = Sketch_1.addLine(6.534999999999997, 10.256, 6.184999999999998, 10.256)
+Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
+
+### Create SketchLine
+SketchLine_21 = Sketch_1.addLine(6.184999999999998, 10.256, 4.917500000000027, 10.94235984621998)
+Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
+Sketch_1.setHorizontal(SketchLine_20.result())
+Sketch_1.setVertical(SketchLine_19.result())
+
+### Create SketchConstraintAngle
+Sketch_1.setAngle(SketchLine_10.result(), SketchLine_18.result(), 45, type = "Supplementary")
+Sketch_1.setLength(SketchLine_20.result(), 0.35)
+Sketch_1.setDistance(SketchLine_19.endPoint(), SketchLine_12.result(), 10.256, True)
+
+### Create SketchArc
+SketchArc_1 = Sketch_1.addArc(0, 2.425, 4.917500000000027, 10.94235984621998, 0, 12.26, False)
+Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.center())
+Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchArc_1.startPoint())
+Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_1.endPoint())
+
+### Create SketchLine
+SketchLine_22 = Sketch_1.addLine(6.188000000000001, 9.028, 6.082, 9.532)
+Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_22.startPoint())
+
+### Create SketchArc
+SketchArc_2 = Sketch_1.addArc(4.79378612024245, 9.263, 6.082, 9.532, 5.676067550792229, 10.23944020672391, False)
+Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
+Sketch_1.setRadius(SketchArc_2.results()[1], 1.316)
+Sketch_1.setDistance(SketchArc_2.startPoint(), SketchLine_1.result(), 0.106, True)
+
+### Create SketchLine
+SketchLine_23 = Sketch_1.addLine(5.676067550792229, 10.23944020672391, 5.405090045827156, 10.43837553323928)
+Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_23.startPoint())
+
+### Create SketchLine
+SketchLine_24 = Sketch_1.addLine(5.405090045827156, 10.43837553323928, 5.126644475052085, 10.62934617154252)
+Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
+
+### Create SketchLine
+SketchLine_25 = Sketch_1.addLine(5.126644475052085, 10.62934617154252, 4.83550000000003, 10.80033167999934)
+Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
+
+### Create SketchArc
+SketchArc_3 = Sketch_1.addArc(0, 2.425, 4.83550000000003, 10.80033167999934, 0, 12.096, False)
+Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.center())
+Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchArc_3.startPoint())
+Sketch_1.setCoincident(SketchLine_11.result(), SketchArc_3.endPoint())
+
+### Create SketchLine
+SketchLine_26 = Sketch_1.addLine(0, 12.096, 0, 12.26)
+Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_26.startPoint())
+Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_26.endPoint())
+Sketch_1.setDistance(SketchArc_1.center(), SketchLine_12.result(), 2.425, True)
+Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_1.center())
+Sketch_1.setLength(SketchLine_26.result(), 0.164)
+
+### Create SketchLine
+SketchLine_27 = Sketch_1.addLine(0, 2.425, 4.917500000000027, 10.94235984621998)
+SketchLine_27.setAuxiliary(True)
+Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_27.startPoint())
+Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_27.endPoint())
+Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_27.result())
+
+### Create SketchLine
+SketchLine_28 = Sketch_1.addLine(0, 2.425, 5.21991026555713, 10.77860263646605)
+SketchLine_28.setAuxiliary(True)
+Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_28.startPoint())
+Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_21.result())
+Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_25.startPoint())
+
+### Create SketchLine
+SketchLine_29 = Sketch_1.addLine(0, 2.425, 5.523638941362955, 10.61413149862094)
+SketchLine_29.setAuxiliary(True)
+Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_29.startPoint())
+Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_21.result())
+Sketch_1.setCoincident(SketchLine_29.result(), SketchLine_24.startPoint())
+Sketch_1.setDistance(SketchLine_25.startPoint(), SketchLine_28.endPoint(), 0.176, True)
+Sketch_1.setDistance(SketchLine_24.startPoint(), SketchLine_29.endPoint(), 0.212, True)
+
+### Create SketchConstraintAngle
+Sketch_1.setAngle(SketchLine_28.result(), SketchLine_11.result(), 32, type = "Direct")
+
+### Create SketchConstraintAngle
+Sketch_1.setAngle(SketchLine_29.result(), SketchLine_11.result(), 34, type = "Direct")
+
+### Create SketchConstraintAngle
+Sketch_1.setAngle(SketchLine_27.result(), SketchLine_11.result(), 30, type = "Direct")
+
+### Create SketchLine
+SketchLine_30 = Sketch_1.addLine(4.79378612024245, 9.263, 5.676067550792229, 10.23944020672391)
+SketchLine_30.setAuxiliary(True)
+Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.startPoint())
+Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_30.endPoint())
+
+### Create SketchLine
+SketchLine_31 = Sketch_1.addLine(4.79378612024245, 9.263, 4.79378612024245, 10.72808112087839)
+SketchLine_31.setAuxiliary(True)
+Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
+Sketch_1.setVertical(SketchLine_31.result())
+
+### Create SketchConstraintAngle
+Sketch_1.setAngle(SketchLine_30.result(), SketchLine_31.result(), 42.1, type = "Direct")
+Sketch_1.setDistance(SketchArc_2.center(), SketchLine_12.result(), 9.263, True)
+Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_27.result())
+Sketch_1.setDistance(SketchLine_22.endPoint(), SketchLine_12.result(), 9.532, True)
+Sketch_1.setDistance(SketchLine_18.endPoint(), SketchLine_12.result(), 9.186999999999999, True)
+Sketch_1.setRadius(SketchArc_1.results()[1], 9.835000000000001)
+model.do()
+
+### Create Revolution
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", (3.891, 0, 2.905000000000017))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+
+### Create Sketch
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+
+### Create SketchProjection
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX_7", (0, 0, 2.425)), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+
+### Create SketchProjection
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", (0, 0, 12.178)), False)
+SketchLine_32 = SketchProjection_4.createdFeature()
+
+### Create SketchArc
+SketchArc_4 = Sketch_2.addArc(0, 2.425, 0, 12.178, 5.453808387550563, 10.51060344512907, True)
+SketchArc_4.setAuxiliary(True)
+Sketch_2.setCoincident(SketchPoint_1.result(), SketchArc_4.center())
+Sketch_2.setCoincident(SketchLine_32.result(), SketchArc_4.startPoint())
+
+### Create SketchProjection
+SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", (2.761819470681477, 0, 6.519565749310471)), False)
+SketchLine_33 = SketchProjection_5.createdFeature()
+Sketch_2.setCoincident(SketchArc_4.endPoint(), SketchLine_33.result())
+Sketch_2.setMiddlePoint(SketchArc_4.startPoint(), SketchLine_32.result())
+
+### Create SketchLine
+SketchLine_34 = Sketch_2.addLine(0, 2.425, 3.282538500974084, 11.74164236673399)
+SketchLine_34.setAuxiliary(True)
+Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_34.startPoint())
+
+### Create SketchLine
+SketchLine_35 = Sketch_2.addLine(3.282538500974084, 11.74164236673399, 3.199461499025965, 11.50584963625379)
+Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
+Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchLine_34.result())
+Sketch_2.setLength(SketchLine_35.result(), 0.25)
+
+### Create SketchPoint
+SketchPoint_2 = Sketch_2.addPoint(3.241, 11.6237460014939)
+Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchArc_4.results()[1])
+Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_35.result())
+
+### Create SketchProjection
+SketchProjection_6 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_36 = SketchProjection_6.createdFeature()
+Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_36.result(), 3.241, True)
+
+### Create SketchArc
+SketchArc_5 = Sketch_2.addArc(0, 2.425, 3.282538500974084, 11.74164236673399, 4.1398177019328, 11.393656164374, True)
+Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchArc_5.center())
+Sketch_2.setCoincident(SketchLine_34.endPoint(), SketchArc_5.startPoint())
+
+### Create SketchArc
+SketchArc_6 = Sketch_2.addArc(0, 2.425, 3.199461499025965, 11.50584963625379, 4.035044020470642, 11.16667053559353, True)
+Sketch_2.setCoincident(SketchAPI_Line(SketchLine_33).startPoint(), SketchArc_6.center())
+Sketch_2.setCoincident(SketchLine_35.endPoint(), SketchArc_6.startPoint())
+
+### Create SketchLine
+SketchLine_37 = Sketch_2.addLine(0, 2.425, 3.911506014428326, 11.49555702253677)
+SketchLine_37.setAuxiliary(True)
+Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_37.startPoint())
+Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchArc_5.results()[1])
+
+### Create SketchLine
+SketchLine_38 = Sketch_2.addLine(0, 2.425, 4.1398177019328, 11.393656164374)
+SketchLine_38.setAuxiliary(True)
+Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_38.startPoint())
+Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_38.endPoint())
+Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchLine_38.result())
+Sketch_2.setDistance(SketchLine_35.startPoint(), SketchLine_37.result(), 0.675, True)
+Sketch_2.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_35.result())
+
+### Create SketchLine
+SketchLine_39 = Sketch_2.addLine(3.911506014428326, 11.49555702253677, 3.81251062025875, 11.26599240868435)
+Sketch_2.setCoincident(SketchLine_37.endPoint(), SketchLine_39.startPoint())
+Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchArc_6.results()[1])
+Sketch_2.setCoincident(SketchLine_39.endPoint(), SketchLine_37.result())
+
+### Create SketchLine
+SketchLine_40 = Sketch_2.addLine(4.1398177019328, 11.393656164374, 4.459277785066647, 11.19096067956113)
+Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_40.startPoint())
+
+### Create SketchProjection
+SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE_3", (2.545485308583308, 0, 11.92488050155302)), False)
+SketchArc_7 = SketchProjection_7.createdFeature()
+Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchArc_7.results()[1])
+
+### Create SketchLine
+SketchLine_41 = Sketch_2.addLine(4.459277785066647, 11.19096067956113, 4.390495384356095, 11.04194790978503)
+Sketch_2.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
+
+### Create SketchProjection
+SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE_3", (2.503038985186497, 0, 11.76646866604162)), False)
+SketchArc_8 = SketchProjection_8.createdFeature()
+Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchArc_8.results()[1])
+
+### Create SketchLine
+SketchLine_42 = Sketch_2.addLine(4.390495384356095, 11.04194790978503, 4.035044020470642, 11.16667053559353)
+Sketch_2.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
+Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchLine_38.result())
+Sketch_2.setCoincident(SketchLine_42.endPoint(), SketchArc_6.endPoint())
+Sketch_2.setDistance(SketchArc_5.endPoint(), SketchLine_41.result(), 0.375, True)
+Sketch_2.setDistance(SketchLine_39.startPoint(), SketchLine_38.result(), 0.25, True)
+Sketch_2.setParallel(SketchLine_41.result(), SketchLine_38.result())
+model.do()
+
+### Create Revolution
+Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (3.862008317343538, 0, 11.38077471561056))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0)
+
+### Create Revolution
+Revolution_3 = model.addRevolution(Part_1_doc, [model.selection("WIRE", (4.212769702413368, 0, 11.10430922268928))], model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389)), 360, 0)
+
+### Create Symmetry
+Symmetry_1 = model.addSymmetry(Part_1_doc, [model.selection("SOLID", (3.237566604725065, 1.012489110826635e-16, 11.61400119092393)), model.selection("SOLID", (3.223802337712571, 1.605864674679632e-16, 11.57493485456337))], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True)
+
+### Create Cut
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.02393444277354129, -2.619925842544883e-15, -2.580701826672511))], [model.selection("COMPOUND", (0, 0, 11.60508262087049))])
+
+### Create Fuse
+Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", (-0.02010673966564346, 1.098068506034238e-08, -2.591493279117804)), model.selection("COMPOUND", (0, 0, 11.54608275997197))], removeEdges = True)
+
+### Create Plane
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 3.6, False)
+
+### Create Sketch
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", (0, 0, 3.6)))
+
+### Create SketchProjection
+SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", (-6.188000000000001, 7.578114393123822e-16, -3.45)), True)
+SketchCircle_1 = SketchProjection_9.createdFeature()
+
+### Create SketchProjection
+SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", (-6.376, 7.808347991363525e-16, -2.25)), True)
+SketchCircle_2 = SketchProjection_10.createdFeature()
+
+### Create SketchArc
+SketchArc_9 = Sketch_3.addArc(0, 0, 6.094, 0, 5.859569950090201, -1.674, True)
+Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_9.center())
+
+### Create SketchProjection
+SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_43 = SketchProjection_11.createdFeature()
+Sketch_3.setCoincident(SketchArc_9.startPoint(), SketchLine_43.result())
+
+### Create SketchPoint
+SketchPoint_3 = Sketch_3.addPoint(6.188000000000001, 0)
+Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_43.result())
+Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchCircle_1.results()[1])
+Sketch_3.setDistance(SketchArc_9.startPoint(), SketchPoint_3.coordinates(), 0.094, True)
+Sketch_3.setDistance(SketchArc_9.endPoint(), SketchLine_43.result(), 1.674, True)
+
+### Create SketchLine
+SketchLine_44 = Sketch_3.addLine(5.859569950090201, -1.674, 5.870724657144867, -1.956000000000001)
+Sketch_3.setCoincident(SketchArc_9.endPoint(), SketchLine_44.startPoint())
+Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchCircle_1.results()[1])
+
+### Create SketchArc
+SketchArc_10 = Sketch_3.addArc(0, 0, 6.470000000000001, 0, 6.167249305809295, -1.955999999999993, True)
+Sketch_3.setCoincident(SketchAPI_Circle(SketchCircle_1).center(), SketchArc_10.center())
+Sketch_3.setCoincident(SketchLine_43.result(), SketchArc_10.startPoint())
+
+### Create SketchLine
+SketchLine_45 = Sketch_3.addLine(6.167249305809295, -1.955999999999993, 6.068561608816571, -1.956000000000005)
+Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_45.startPoint())
+Sketch_3.setCoincident(SketchLine_45.endPoint(), SketchCircle_2.results()[1])
+Sketch_3.setHorizontal(SketchLine_45.result())
+Sketch_3.setCoincident(SketchLine_44.endPoint(), SketchLine_45.result())
+Sketch_3.setDistance(SketchArc_10.startPoint(), SketchLine_45.result(), 1.956, True)
+
+### Create SketchPoint
+SketchPoint_4 = Sketch_3.addPoint(6.376, 0)
+Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchCircle_2.results()[1])
+Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_43.result())
+Sketch_3.setDistance(SketchPoint_4.coordinates(), SketchArc_10.startPoint(), 0.094, True)
+
+### Create SketchConstraintMirror
+SketchConstraintMirror_1_objects = [SketchArc_9.results()[1], SketchLine_44.result(), SketchArc_10.results()[1], SketchLine_45.result()]
+SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_43.result(), SketchConstraintMirror_1_objects)
+[SketchArc_11, SketchLine_46, SketchArc_12, SketchLine_47] = SketchConstraintMirror_1.mirrored()
+model.do()
+
+### Create Extrusion
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (6.023784975045098, 0, 3.6)), model.selection("WIRE", (6.393864363926704, 0.9896456414839456, 3.6))], model.selection(), 0, 4.2)
+
+### Create Sketch
+Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
+
+### Create SketchLine
+SketchLine_48 = Sketch_4.addLine(0.75, 2.1, -0.75, 2.1)
+
+### Create SketchLine
+SketchLine_49 = Sketch_4.addLine(-0.75, 2.1, -0.75, 0.3)
+
+### Create SketchLine
+SketchLine_50 = Sketch_4.addLine(-0.75, 0.3, 0.75, 0.3)
+
+### Create SketchLine
+SketchLine_51 = Sketch_4.addLine(0.75, 0.3, 0.75, 2.1)
+Sketch_4.setCoincident(SketchLine_51.endPoint(), SketchLine_48.startPoint())
+Sketch_4.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
+Sketch_4.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
+Sketch_4.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
+Sketch_4.setHorizontal(SketchLine_48.result())
+Sketch_4.setVertical(SketchLine_49.result())
+Sketch_4.setHorizontal(SketchLine_50.result())
+Sketch_4.setVertical(SketchLine_51.result())
+
+### Create SketchProjection
+SketchProjection_12 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_52 = SketchProjection_12.createdFeature()
+Sketch_4.setDistance(SketchLine_52.result(), SketchLine_50.endPoint(), 0.3, True)
+Sketch_4.setDistance(SketchLine_51.endPoint(), SketchLine_52.result(), 2.1, True)
+
+### Create SketchPoint
+SketchPoint_5 = Sketch_4.addPoint(0, 2.1)
+Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_48.result())
+Sketch_4.setMiddlePoint(SketchLine_48.result(), SketchPoint_5.coordinates())
+
+### Create SketchProjection
+SketchProjection_13 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_53 = SketchProjection_13.createdFeature()
+Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_53.result())
+Sketch_4.setDistance(SketchPoint_5.coordinates(), SketchLine_51.endPoint(), 0.75, True)
+model.do()
+
+### Create Extrusion
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", (0, 0, 1.2))], model.selection(), 10, 0)
+
+### Create Rotation
+Rotation_1 = model.addRotation(Part_1_doc, [model.selection("COMPOUND", "all-in-Extrusion_1")], axis = model.selection("EDGE", "PartSet/OZ"), angle = -90)
+
+### Create Rotation
+Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", (5, 0, 1.2))], axis = model.selection("EDGE", "PartSet/OZ"), angle = -90)
+
+### Create Fuse
+Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", (-0.01517504751343968, 2.050041270815023e-08, -2.581926283264154)), model.selection("COMPOUND", (6.661338147750939e-16, -6.164784975045299, 1.5))], removeEdges = True)
+
+### Create Cut
+Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", (-0.01123484393534465, -0.0370107755507461, -2.561989939908471))], [model.selection("SOLID", (6.683953801956267e-16, -5, 1.2))])
+
+### Create Group
+Group_1_objects = [model.selection("VERTEX", (-4.1398177019328, 0, 11.393656164374)),
+                   model.selection("VERTEX", (-3.911506014428326, 0, 11.49555702253677)),
+                   model.selection("VERTEX", (-4.459277785066647, 0, 11.19096067956113)),
+                   model.selection("VERTEX", (-3.81251062025875, 0, 11.26599240868435)),
+                   model.selection("VERTEX", (4.917500000000027, 0, 10.94235984621998)),
+                   model.selection("VERTEX", (4.459277785066647, 0, 11.19096067956113)),
+                   model.selection("VERTEX", (2.020497700342232, -3.596329980388322e-14, 12.05021761015889)),
+                   model.selection("VERTEX", (0, 0, 12.26000000000002)),
+                   model.selection("VERTEX", (-4.035044020470642, 0, 11.16667053559353)),
+                   model.selection("VERTEX", (6.184999999999998, 0, 10.256)),
+                   model.selection("VERTEX", (4.1398177019328, 0, 11.393656164374)),
+                   model.selection("VERTEX", (-4.390495384356095, 0, 11.04194790978503)),
+                   model.selection("VERTEX", (6.534999999999997, 0, 10.256)),
+                   model.selection("VERTEX", (3.911506014428326, 0, 11.49555702253677)),
+                   model.selection("VERTEX", (4.83550000000003, 0, 10.80033167999934)),
+                   model.selection("VERTEX", (4.390495384356095, 0, 11.04194790978503)),
+                   model.selection("VERTEX", (1.980680877755172, -3.581982442331714e-14, 11.89099937991209)),
+                   model.selection("VERTEX", (0, 0, 12.09600000000002)),
+                   model.selection("VERTEX", (6.534999999999997, 0, 9.186999999999999)),
+                   model.selection("VERTEX", (3.81251062025875, 0, 11.26599240868435)),
+                   model.selection("VERTEX", (5.126644475052085, 0, 10.62934617154252)),
+                   model.selection("VERTEX", (4.035044020470642, 0, 11.16667053559353)),
+                   model.selection("VERTEX", (6.375999999999999, 0, 9.028)),
+                   model.selection("VERTEX", (5.405090045827156, 0, 10.43837553323928)),
+                   model.selection("VERTEX", (6.376, 0, -2.25)),
+                   model.selection("VERTEX", (1.956000000000006, -6.068561608816571, -0.6000000000000001)),
+                   model.selection("VERTEX", (-1.956000000000004, -6.068561608816571, -0.6000000000000001)),
+                   model.selection("VERTEX", (-1.956000000000004, -6.068561608816571, 3.6)),
+                   model.selection("VERTEX", (1.956000000000006, -6.068561608816571, 3.6)),
+                   model.selection("VERTEX", (5.676067550792229, 0, 10.23944020672391)),
+                   model.selection("VERTEX", (6.538000000000002, 0, -2.4)),
+                   model.selection("VERTEX", (-1.955999999999992, -6.167249305809295, -0.6000000000000001)),
+                   model.selection("VERTEX", (1.955999999999933, -6.167249305809104, -0.6000000000000001)),
+                   model.selection("VERTEX", (-1.955999999999992, -6.167249305809295, 3.6)),
+                   model.selection("VERTEX", (1.955999999999933, -6.167249305809104, 3.6)),
+                   model.selection("VERTEX", (6.082, 0, 9.532)),
+                   model.selection("VERTEX", (6.538000000000001, 0, -3.45)),
+                   model.selection("VERTEX", (0.7500000000000007, -6.426383119609755, 2.1)),
+                   model.selection("VERTEX", (0.7500000000000007, -6.426383119609755, 0.3)),
+                   model.selection("VERTEX", (-0.7499999999999993, -6.426383119609755, 0.3)),
+                   model.selection("VERTEX", (-0.7499999999999993, -6.426383119609755, 2.1)),
+                   model.selection("VERTEX", (6.188000000000001, 0, 9.028)),
+                   model.selection("VERTEX", (7.781999999999999, 0, -3.45)),
+                   model.selection("VERTEX", (0.7500000000000007, -6.047671948775005, 2.1)),
+                   model.selection("VERTEX", (0.7500000000000007, -6.047671948775005, 0.3)),
+                   model.selection("VERTEX", (-0.7499999999999993, -6.047671948775005, 0.3)),
+                   model.selection("VERTEX", (-0.7499999999999993, -6.047671948775005, 2.1)),
+                   model.selection("VERTEX", (6.188000000000001, 0, -3.45)),
+                   model.selection("VERTEX", (-1.956, -5.870724657144867, -0.6000000000000001)),
+                   model.selection("VERTEX", (-1.956, -5.870724657144867, 3.6)),
+                   model.selection("VERTEX", (1.956000000000002, -5.870724657144867, -0.6000000000000001)),
+                   model.selection("VERTEX", (1.956000000000002, -5.870724657144867, 3.6)),
+                   model.selection("VERTEX", (7.781999999999999, 0, -6.45)),
+                   model.selection("VERTEX", (-1.673999999999999, -5.859569950090201, -0.6000000000000001)),
+                   model.selection("VERTEX", (-1.673999999999999, -5.859569950090201, 3.6)),
+                   model.selection("VERTEX", (1.674, -5.859569950090198, -0.6000000000000001)),
+                   model.selection("VERTEX", (1.674, -5.859569950090198, 3.6)),
+                   model.selection("VERTEX", (7.031999999999999, 0, -5.850000000000001)),
+                   model.selection("VERTEX", (7.031999999999999, 0, -4.05)),
+                   model.selection("VERTEX", (5.531999999999999, 0, -5.850000000000001)),
+                   model.selection("VERTEX", (5.531999999999999, 0, -4.05))]
+Group_1 = model.addGroup(Part_1_doc, "VERTEX", Group_1_objects)
+
+### Create Group
+Group_2_objects = [model.selection("EDGE", (-2.396461671558512, -1.131817856525968e-16, 12.00789389781351)),
+                   model.selection("EDGE", (-2.638225269835214, -8.266365894244581e-17, 11.94417283305663)),
+                   model.selection("EDGE", (-4.025984270042958, 0, 11.44532896613902)),
+                   model.selection("EDGE", (-2.020497700342235, -1.583299567007201e-16, 12.05021761015891)),
+                   model.selection("EDGE", (-4.299547743499724, 0, 11.29230842196757)),
+                   model.selection("EDGE", (-3.862008317343538, 0, 11.38077471561056)),
+                   model.selection("EDGE", (-2.571455041301211, -8.057154366246956e-17, 11.70325430620259)),
+                   model.selection("EDGE", (-4.917500000000027, 6.022200634807143e-16, 10.94235984621998)),
+                   model.selection("EDGE", (4.690036353933139, 0, 11.06969687142275)),
+                   model.selection("EDGE", (3.239887742704441, 1.292862209830259, 11.62058914486002)),
+                   model.selection("EDGE", (1.015679527234812, 0, 12.20741381755836)),
+                   model.selection("EDGE", (3.239887742704441, -1.292862209830259, 11.62058914486002)),
+                   model.selection("EDGE", (-2.335810181591952, -1.103172942157527e-16, 11.7653626693813)),
+                   model.selection("EDGE", (-3.924091572380405, 0, 11.21703556246067)),
+                   model.selection("EDGE", (-6.184999999999998, 7.574440452726377e-16, 10.256)),
+                   model.selection("EDGE", (5.551250000000012, 0, 10.59917992310999)),
+                   model.selection("EDGE", (4.299547743499724, 0, 11.29230842196757)),
+                   model.selection("EDGE", (2.396461671558512, -1.131817856525968e-16, 12.00789389781351)),
+                   model.selection("EDGE", (-1.980680877755174, -1.56449459660897e-16, 11.89099937991211)),
+                   model.selection("EDGE", (-4.212769702413368, 0, 11.10430922268928)),
+                   model.selection("EDGE", (-6.534999999999997, 8.003066832427949e-16, 10.256)),
+                   model.selection("EDGE", (2.638225269835214, -8.266365894244581e-17, 11.94417283305663)),
+                   model.selection("EDGE", (4.025984270042958, 0, 11.44532896613902)),
+                   model.selection("EDGE", (-4.83550000000003, 5.921779597277063e-16, 10.80033167999934)),
+                   model.selection("EDGE", (4.61457932087684, 0, 10.9240528114218)),
+                   model.selection("EDGE", (3.185588131055634, 1.277506786200096, 11.46647364484857)),
+                   model.selection("EDGE", (0.9956307038432277, 0, 12.04461332391097)),
+                   model.selection("EDGE", (3.185588131055634, -1.277506786200096, 11.46647364484857)),
+                   model.selection("EDGE", (-6.534999999999997, 8.003066832427949e-16, 9.186999999999999)),
+                   model.selection("EDGE", (6.534999999999997, 0, 9.721499999999999)),
+                   model.selection("EDGE", (3.862008317343538, 0, 11.38077471561056)),
+                   model.selection("EDGE", (2.571455041301211, -8.057154366246956e-17, 11.70325430620259)),
+                   model.selection("EDGE", (-5.126644475052085, 6.278328746739e-16, 10.62934617154252)),
+                   model.selection("EDGE", (4.981072237526058, 0, 10.71483892577093)),
+                   model.selection("EDGE", (4.212769702413368, 0, 11.10430922268928)),
+                   model.selection("EDGE", (2.335810181591952, -1.103172942157527e-16, 11.7653626693813)),
+                   model.selection("EDGE", (-6.375999999999999, 7.808347991363523e-16, 9.028)),
+                   model.selection("EDGE", (6.455499999999997, 0, 9.1075)),
+                   model.selection("EDGE", (3.924091572380405, 0, 11.21703556246067)),
+                   model.selection("EDGE", (-5.405090045827156, 6.619326223725447e-16, 10.43837553323928)),
+                   model.selection("EDGE", (5.26586726043962, 0, 10.5338608523909)),
+                   model.selection("EDGE", (6.375999999999999, 0, 3.389)),
+                   model.selection("EDGE", (-6.376, 7.808347991363525e-16, -2.25)),
+                   model.selection("EDGE", (8.881784197001252e-16, -6.376, -0.6000000000000001)),
+                   model.selection("EDGE", (-1.956000000000004, -6.068561608816571, 1.5)),
+                   model.selection("EDGE", (0, -6.376, 3.6)),
+                   model.selection("EDGE", (1.956000000000006, -6.068561608816571, 1.5)),
+                   model.selection("EDGE", (-5.676067550792229, 6.95117795782186e-16, 10.23944020672391)),
+                   model.selection("EDGE", (5.540578798309692, 0, 10.33890786998159)),
+                   model.selection("EDGE", (-6.538000000000002, 8.006740772825398e-16, -2.4)),
+                   model.selection("EDGE", (6.457000000000001, 0, -2.325)),
+                   model.selection("EDGE", (-1.955999999999998, -6.117905457312933, -0.6000000000000001)),
+                   model.selection("EDGE", (6.661338147750939e-16, -6.47, -0.6000000000000001)),
+                   model.selection("EDGE", (1.956, -6.117905457312933, -0.6000000000000001)),
+                   model.selection("EDGE", (-1.955999999999992, -6.167249305809295, 1.5)),
+                   model.selection("EDGE", (-1.955999999999998, -6.117905457312933, 3.6)),
+                   model.selection("EDGE", (1.110223024625157e-15, -6.470000000000402, 3.6)),
+                   model.selection("EDGE", (1.956, -6.117905457312933, 3.6)),
+                   model.selection("EDGE", (1.955999999999933, -6.167249305809104, 1.5)),
+                   model.selection("EDGE", (-6.082, 7.448301832414202e-16, 9.532)),
+                   model.selection("EDGE", (5.93522397862061, 0, 9.917962300793777)),
+                   model.selection("EDGE", (-6.538000000000001, 8.006740772825397e-16, -3.45)),
+                   model.selection("EDGE", (6.538000000000002, 0, -2.925)),
+                   model.selection("EDGE", (0.7500000000000007, -6.426383119609755, 1.2)),
+                   model.selection("EDGE", (2.303007255029294e-15, -6.470000000000402, 0.3)),
+                   model.selection("EDGE", (-0.7499999999999993, -6.426383119609755, 1.2)),
+                   model.selection("EDGE", (2.303007255029294e-15, -6.470000000000402, 2.1)),
+                   model.selection("EDGE", (-6.188000000000001, 7.578114393123822e-16, 9.028)),
+                   model.selection("EDGE", (6.135, 0, 9.280000000000001)),
+                   model.selection("EDGE", (-7.781999999999999, 9.530201390964701e-16, -3.45)),
+                   model.selection("EDGE", (0.7500000000000007, -6.047671948775005, 1.2)),
+                   model.selection("EDGE", (0.7500000000000007, -6.23702753419238, 2.1)),
+                   model.selection("EDGE", (0.7500000000000007, -6.23702753419238, 0.3)),
+                   model.selection("EDGE", (2.169169430007367e-15, -6.094000000000006, 0.3)),
+                   model.selection("EDGE", (-0.7499999999999993, -6.23702753419238, 0.3)),
+                   model.selection("EDGE", (-0.7499999999999993, -6.047671948775005, 1.2)),
+                   model.selection("EDGE", (-0.7499999999999993, -6.23702753419238, 2.1)),
+                   model.selection("EDGE", (2.169169430007367e-15, -6.094000000000006, 2.1)),
+                   model.selection("EDGE", (6.188000000000001, 0, 2.789)),
+                   model.selection("EDGE", (-6.188000000000001, 7.578114393123822e-16, -3.45)),
+                   model.selection("EDGE", (-1.956, -5.870724657144867, 1.5)),
+                   model.selection("EDGE", (1.554312234475219e-15, -6.188000000000001, -0.6000000000000001)),
+                   model.selection("EDGE", (1.956000000000002, -5.870724657144867, 1.5)),
+                   model.selection("EDGE", (-4.440892098500626e-16, -6.188000000000001, 3.6)),
+                   model.selection("EDGE", (-7.781999999999999, 9.530201390964701e-16, -6.45)),
+                   model.selection("EDGE", (7.781999999999999, 0, -4.95)),
+                   model.selection("EDGE", (-1.673999999999999, -5.859569950090201, 1.5)),
+                   model.selection("EDGE", (1.110223024625157e-15, -6.094000000000006, -0.6000000000000001)),
+                   model.selection("EDGE", (2.220446049250313e-16, -6.094, 3.6)),
+                   model.selection("EDGE", (1.674, -5.859569950090198, 1.5)),
+                   model.selection("EDGE", (-1.815, -5.865147303617534, -0.6000000000000001)),
+                   model.selection("EDGE", (-1.815, -5.865147303617534, 3.6)),
+                   model.selection("EDGE", (1.815000000000001, -5.865147303617533, -0.6000000000000001)),
+                   model.selection("EDGE", (1.815000000000001, -5.865147303617533, 3.6)),
+                   model.selection("EDGE", (-7.031999999999999, 8.611716291604186e-16, -5.850000000000001)),
+                   model.selection("EDGE", (-7.031999999999999, 8.611716291604186e-16, -4.05)),
+                   model.selection("EDGE", (7.031999999999999, 0, -4.950000000000001)),
+                   model.selection("EDGE", (-5.531999999999999, 6.774746092883157e-16, -5.850000000000001)),
+                   model.selection("EDGE", (-5.531999999999999, 6.774746092883157e-16, -4.05)),
+                   model.selection("EDGE", (5.531999999999999, 0, -4.950000000000001))]
+Group_2 = model.addGroup(Part_1_doc, "EDGE", Group_2_objects)
+
+### Create Group
+Group_3_objects = [model.selection("FACE_4", (-2.517545082612181, -9.793056484573228e-17, 11.9767982996405)),
+                   model.selection("FACE", (-2.208479685950373, -1.357558711766585e-16, 12.02905575398621)),
+                   model.selection("FACE", (-2.604840155568212, -8.161760130245771e-17, 11.82371356962961)),
+                   model.selection("FACE", (-2.545485308583307, 3.11732043543316e-16, 11.92488050155302)),
+                   model.selection("FACE_4", (-2.453829120812922, -9.545206300209715e-17, 11.73505406245584)),
+                   model.selection("FACE", (-5.551250000000012, 6.798320543766759e-16, 10.59917992310999)),
+                   model.selection("FACE", (2.208479685950373, -1.357558711766585e-16, 12.02905575398621)),
+                   model.selection("FACE", (-2.158245529673563, -1.333833769383248e-16, 11.8281810246467)),
+                   model.selection("FACE", (0, 0, 10.256)),
+                   model.selection("FACE_4", (2.517545082612181, -9.793056484573228e-17, 11.9767982996405)),
+                   model.selection("FACE", (-2.503038985186496, 3.065338681349682e-16, 11.76646866604162)),
+                   model.selection("FACE", (-6.534999999999997, 8.003066832427949e-16, 9.721499999999999)),
+                   model.selection("FACE", (2.604840155568212, -8.161760130245771e-17, 11.82371356962961)),
+                   model.selection("FACE", (-4.981072237526058, 6.100054172008031e-16, 10.71483892577093)),
+                   model.selection("FACE", (2.158245529673563, -1.333833769383248e-16, 11.8281810246467)),
+                   model.selection("FACE", (-6.455499999999997, 7.905707411895736e-16, 9.1075)),
+                   model.selection("FACE_4", (2.453829120812922, -9.545206300209715e-17, 11.73505406245584)),
+                   model.selection("FACE", (-5.26586726043962, 6.448827485232222e-16, 10.5338608523909)),
+                   model.selection("FACE", (-6.376, 7.808347991363525e-16, 3.389)),
+                   model.selection("FACE", (-5.540578798309692, 6.785252090773653e-16, 10.33890786998159)),
+                   model.selection("FACE", (-6.457000000000002, 7.907544382094462e-16, -2.325)),
+                   model.selection("FACE", (6.960299896894503e-16, -6.269280804408197, -0.6000000000000001)),
+                   model.selection("FACE", (-1.955999999999998, -6.117905457312933, 1.5)),
+                   model.selection("FACE", (6.960299896894726e-16, -6.269280804408398, 3.6)),
+                   model.selection("FACE", (1.956, -6.117905457312933, 1.5)),
+                   model.selection("FACE", (-5.93522397862061, 7.268553047640348e-16, 9.917962300793777)),
+                   model.selection("FACE", (-6.538000000000001, 8.006740772825397e-16, -2.925)),
+                   model.selection("FACE", (-8.663786611642525e-16, -6.470000000000402, 1.5)),
+                   model.selection("FACE", (-6.135, 7.513208112769011e-16, 9.280000000000001)),
+                   model.selection("FACE", (0, 0, -3.45)),
+                   model.selection("FACE", (0.7500000000000007, -6.23702753419238, 1.2)),
+                   model.selection("FACE", (1.998401444325282e-15, -6.258835974387703, 0.3)),
+                   model.selection("FACE", (-0.7499999999999993, -6.23702753419238, 1.2)),
+                   model.selection("FACE", (1.998401444325282e-15, -6.258835974387703, 2.1)),
+                   model.selection("FACE", (-6.188000000000001, 7.578114393123822e-16, 2.789)),
+                   model.selection("FACE", (-7.781999999999999, 9.530201390964701e-16, -4.95)),
+                   model.selection("FACE", (-8.160296075942244e-16, -6.094000000000006, 1.5)),
+                   model.selection("FACE_2", (0, 0, -3.45)),
+                   model.selection("FACE", (-1.815, -5.865147303617534, 1.5)),
+                   model.selection("FACE", (6.687744774686146e-16, -6.023784975045102, -0.6000000000000001)),
+                   model.selection("FACE", (1.815000000000001, -5.865147303617533, 1.5)),
+                   model.selection("FACE", (6.687744774686142e-16, -6.023784975045098, 3.6)),
+                   model.selection("FACE", (0, 0, -6.45)),
+                   model.selection("FACE", (-7.031999999999999, 8.611716291604186e-16, -4.950000000000001)),
+                   model.selection("FACE", (0, 0, -5.850000000000001)),
+                   model.selection("FACE", (0, 0, -4.05)),
+                   model.selection("FACE", (-5.531999999999999, 6.774746092883157e-16, -4.950000000000001))]
+Group_3 = model.addGroup(Part_1_doc, "FACE", Group_3_objects)
+
+### Create Partition
+Partition_1_objects = [model.selection("SOLID", (-0.01000739040276288, -0.02886888807097911, -2.568297753475152)),
+                       model.selection("FACE", "PartSet/XOZ"),
+                       model.selection("FACE", "PartSet/YOZ")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects, keepSubResults = True)
+
+### Create Revolution
+Revolution_4 = model.addRevolution(Part_1_doc, [model.selection("EDGE", (3.241000000000025, 0, 11.62374600149389))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+
+### Create Split
+Split_1 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Partition_1")], [model.selection("FACE", (-3.241000000000025, 3.969080276036602e-16, 11.62374600149389))], keepSubResults = True)
+
+### Create Plane
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("EDGE", (1.641269250487042, 0, 7.083321183366995)), 45)
+
+### Create Sketch
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", (-0.2226138955685692, 0.569819820950182, 0.07843369470366612)))
+
+### Create SketchLine
+SketchLine_54 = Sketch_5.addLine(5.509213645269787, 10.82082332930156, 5.382690082387538, 10.60520378465038)
+
+### Create SketchLine
+SketchLine_55 = Sketch_5.addLine(5.382690082387538, 10.60520378465038, 5.5912917558727, 10.4792224745154)
+Sketch_5.setCoincident(SketchLine_54.endPoint(), SketchLine_55.startPoint())
+
+### Create SketchLine
+SketchLine_56 = Sketch_5.addLine(5.5912917558727, 10.4792224745154, 5.928669438910004, 10.31165844357506)
+Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.startPoint())
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_1 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (3.702627511927584, 0.4999301855486544, 11.56915131750861)), True)
+[SketchPoint_6] = SketchIntersectionPoint_1.intersectionPoints()
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_2 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (3.842036619330953, 0.6956302444411427, 11.49857356165358)), True)
+[SketchPoint_7] = SketchIntersectionPoint_2.intersectionPoints()
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_3 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (4.017164528771908, 0.996160155893292, 11.34673072293646)), True)
+[SketchPoint_8] = SketchIntersectionPoint_3.intersectionPoints()
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_4 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (3.6089185751001, 0.4872775689878997, 11.33772412279539)), True)
+[SketchPoint_9] = SketchIntersectionPoint_4.intersectionPoints()
+Sketch_5.setCoincident(SketchLine_54.startPoint(), SketchAPI_Point(SketchPoint_6).coordinates())
+Sketch_5.setCoincident(SketchLine_55.startPoint(), SketchAPI_Point(SketchPoint_9).coordinates())
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_5 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (3.744799409892532, 0.6780247006964295, 11.26893260291564)), True)
+[SketchPoint_10] = SketchIntersectionPoint_5.intersectionPoints()
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_6 = Sketch_5.addIntersectionPoint(model.selection("EDGE", (3.953197175833091, 0.9847109023550349, 11.19602146433181)), True)
+[SketchPoint_11] = SketchIntersectionPoint_6.intersectionPoints()
+Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchAPI_Point(SketchPoint_10).coordinates())
+Sketch_5.setCoincident(SketchLine_56.endPoint(), SketchAPI_Point(SketchPoint_11).coordinates())
+
+### Create SketchLine
+SketchLine_57 = Sketch_5.addLine(5.723231855768999, 10.69157079694662, 5.5912917558727, 10.4792224745154)
+SketchLine_57.setName("SketchLine_72")
+SketchLine_57.result().setName("SketchLine_72")
+Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_57.endPoint())
+
+### Create SketchLine
+SketchLine_58 = Sketch_5.addLine(5.928669438910005, 10.31165844357506, 6.034221518827074, 10.48153710152002)
+SketchLine_58.setName("SketchLine_109")
+SketchLine_58.result().setName("SketchLine_109")
+Sketch_5.setCoincident(SketchLine_56.endPoint(), SketchLine_58.startPoint())
+
+### Create SketchLine
+SketchLine_59 = Sketch_5.addLine(6.034221518827074, 10.48153710152002, 5.723231855768999, 10.69157079694662)
+SketchLine_59.setName("SketchLine_113")
+SketchLine_59.result().setName("SketchLine_113")
+Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_59.startPoint())
+Sketch_5.setCoincident(SketchLine_58.result(), SketchAPI_Point(SketchPoint_8).coordinates())
+Sketch_5.setLength(SketchLine_58.result(), 0.2)
+
+### Create SketchLine
+SketchLine_60 = Sketch_5.addLine(5.723231855768999, 10.69157079694662, 5.514274587785066, 10.82944811108761)
+SketchLine_60.setName("SketchLine_114")
+SketchLine_60.result().setName("SketchLine_114")
+Sketch_5.setCoincident(SketchAPI_Point(SketchPoint_7).coordinates(), SketchLine_60.startPoint())
+
+### Create SketchLine
+SketchLine_61 = Sketch_5.addLine(5.514274587785066, 10.82944811108761, 5.509213645269788, 10.82082332930156)
+SketchLine_61.setName("SketchLine_115")
+SketchLine_61.result().setName("SketchLine_115")
+Sketch_5.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
+Sketch_5.setCoincident(SketchLine_54.startPoint(), SketchLine_61.endPoint())
+Sketch_5.setCollinear(SketchLine_61.result(), SketchLine_54.result())
+Sketch_5.setLength(SketchLine_61.result(), 0.01)
+Sketch_5.setCoincident(SketchLine_60.startPoint(), SketchLine_59.endPoint())
+Sketch_5.setCoincident(SketchLine_60.startPoint(), SketchLine_57.startPoint())
+model.do()
+
+### Create Face
+Face_1 = model.addFace(Part_1_doc, [model.selection("COMPOUND", "all-in-Sketch_5")])
+
+### Create Revolution
+Revolution_5 = model.addRevolution(Part_1_doc, [model.selection("EDGE", (4.076911075012474, 0.9099495009061933, 11.2579935104532))], model.selection("EDGE", "PartSet/OZ"), model.selection("FACE", "PartSet/YOZ"), 0, model.selection(), 0)
+
+### Create Symmetry
+Symmetry_2 = model.addSymmetry(Part_1_doc, [model.selection("COMPOUND", "all-in-Face_1"), model.selection("COMPOUND", "all-in-Revolution_5")], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Symmetry
+Symmetry_3 = model.addSymmetry(Part_1_doc, [model.selection("COMPOUND", "all-in-Symmetry_2")], model.selection("FACE", "PartSet/XOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Point
+Point_2 = model.addPoint(Part_1_doc, model.selection("EDGE", (3.477197596484867, 3.477197596484866, 10.94235984621998)), 1.25, False, False)
+
+### Create Plane
+Plane_6 = model.addPlane(Part_1_doc, model.selection("EDGE", (4.076911075012474, 0.9099495009061933, 11.2579935104532)), model.selection("VERTEX", (4.759482234014627, 1.236582028859954, 10.94235984621998)), False)
+
+### Create Sketch
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", (4.402175028097471, 1.06143508289953, 11.14508272976159)))
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_7 = Sketch_6.addIntersectionPoint(model.selection("EDGE", (3.419214840427572, 3.419214840427571, 10.80033167999934)), True)
+[SketchPoint_12] = SketchIntersectionPoint_7.intersectionPoints()
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_8 = Sketch_6.addIntersectionPoint(model.selection("EDGE", (4.017164528771908, 0.996160155893292, 11.34673072293646)), True)
+SketchIntersectionPoint_8.setName("SketchIntersectionPoint_9")
+SketchIntersectionPoint_8.result().setName("SketchIntersectionPoint_9")
+[SketchPoint_13] = SketchIntersectionPoint_8.intersectionPoints()
+SketchPoint_13.setName("SketchPoint_14")
+SketchPoint_13.result().setName("SketchPoint_14")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_9 = Sketch_6.addIntersectionPoint(model.selection("EDGE", (3.953197175833091, 0.9847109023550349, 11.19602146433181)), True)
+SketchIntersectionPoint_9.setName("SketchIntersectionPoint_10")
+SketchIntersectionPoint_9.result().setName("SketchIntersectionPoint_10")
+[SketchPoint_14] = SketchIntersectionPoint_9.intersectionPoints()
+SketchPoint_14.setName("SketchPoint_15")
+SketchPoint_14.result().setName("SketchPoint_15")
+
+### Create SketchProjection
+SketchProjection_14 = Sketch_6.addProjection(model.selection("VERTEX", (4.759482234014627, 1.236582028859954, 10.94235984621998)), False)
+SketchPoint_15 = SketchProjection_14.createdFeature()
+SketchPoint_15.setName("SketchPoint_16")
+SketchPoint_15.result().setName("SketchPoint_16")
+
+### Create SketchLine
+SketchLine_62 = Sketch_6.addLine(5.246389275102901, -10.59990828317982, 5.359721474154084, -10.7814541886472)
+SketchLine_62.setName("SketchLine_60")
+SketchLine_62.result().setName("SketchLine_60")
+Sketch_6.setCoincident(SketchLine_62.result(), SketchAPI_Point(SketchPoint_15).coordinates())
+Sketch_6.setCoincident(SketchLine_62.result(), SketchAPI_Point(SketchPoint_12).coordinates())
+Sketch_6.setDistance(SketchAPI_Point(SketchPoint_15).coordinates(), SketchLine_62.endPoint(), 0.05, True)
+Sketch_6.setCoincident(SketchLine_62.startPoint(), SketchAPI_Point(SketchPoint_12).coordinates())
+model.do()
+
+### Create Filling
+Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", (4.731694417794685, 1.230193210543086, 10.89299420755799)), model.selection("EDGE", (4.076911075012474, 0.9099495009061933, 11.2579935104532))])
+
+### Create Revolution
+Revolution_6 = model.addRevolution(Part_1_doc, [model.selection("EDGE_2", (4.731694417794685, 1.230193210543086, 10.89299420755799))], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+
+### Create Point
+Point_3 = model.addPoint(Part_1_doc, model.selection("EDGE", (4.373455441638796, 4.373455441638795, 10.256)), 1.5, False, False)
+
+### Create Plane
+Plane_7 = model.addPlane(Part_1_doc, model.selection("EDGE_4", (4.731694417794685, 1.230193210543086, 10.89299420755799)), model.selection("VERTEX", (6.003998107905526, 1.485338924376133, 10.256)), False)
+
+### Create Sketch
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", (5.34152925833792, 1.352916016182442, 10.62081358317238)))
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_10 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.620942815054086, 4.620942815054085, 10.256)), True)
+SketchIntersectionPoint_10.setName("SketchIntersectionPoint_11")
+SketchIntersectionPoint_10.result().setName("SketchIntersectionPoint_11")
+[SketchPoint_16] = SketchIntersectionPoint_10.intersectionPoints()
+SketchPoint_16.setName("SketchPoint_17")
+SketchPoint_16.result().setName("SketchPoint_17")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_11 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.620942815054086, 4.620942815054085, 9.186999999999999)), True)
+SketchIntersectionPoint_11.setName("SketchIntersectionPoint_12")
+SketchIntersectionPoint_11.result().setName("SketchIntersectionPoint_12")
+[SketchPoint_17] = SketchIntersectionPoint_11.intersectionPoints()
+SketchPoint_17.setName("SketchPoint_18")
+SketchPoint_17.result().setName("SketchPoint_18")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_12 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.508512836845426, 4.508512836845425, 9.028)), True)
+SketchIntersectionPoint_12.setName("SketchIntersectionPoint_13")
+SketchIntersectionPoint_12.result().setName("SketchIntersectionPoint_13")
+[SketchPoint_18] = SketchIntersectionPoint_12.intersectionPoints()
+SketchPoint_18.setName("SketchPoint_19")
+SketchPoint_18.result().setName("SketchPoint_19")
+
+### Create SketchLine
+SketchLine_63 = Sketch_7.addLine(6.348502432487296, -9.04671367200557, 6.153596006787127, -10.27430623369788)
+SketchLine_63.setName("SketchLine_65")
+SketchLine_63.result().setName("SketchLine_65")
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_18).coordinates(), SketchLine_63.startPoint())
+
+### Create SketchProjection
+SketchProjection_15 = Sketch_7.addProjection(model.selection("VERTEX", (6.003998107905526, 1.485338924376133, 10.256)), False)
+SketchProjection_15.setName("SketchProjection_16")
+SketchProjection_15.result().setName("SketchProjection_16")
+SketchPoint_19 = SketchProjection_15.createdFeature()
+SketchPoint_19.setName("SketchPoint_20")
+SketchPoint_19.result().setName("SketchPoint_20")
+Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchPoint_19.result())
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_13 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.013585855638104, 4.013585855638103, 10.23944020672391)), True)
+SketchIntersectionPoint_13.setName("SketchIntersectionPoint_14")
+SketchIntersectionPoint_13.result().setName("SketchIntersectionPoint_14")
+[SketchPoint_20] = SketchIntersectionPoint_13.intersectionPoints()
+SketchPoint_20.setName("SketchPoint_21")
+SketchPoint_20.result().setName("SketchPoint_21")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_14 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.300623443176582, 4.300623443176582, 9.532)), True)
+SketchIntersectionPoint_14.setName("SketchIntersectionPoint_15")
+SketchIntersectionPoint_14.result().setName("SketchIntersectionPoint_15")
+[SketchPoint_21] = SketchIntersectionPoint_14.intersectionPoints()
+SketchPoint_21.setName("SketchPoint_22")
+SketchPoint_21.result().setName("SketchPoint_22")
+
+### Create SketchLine
+SketchLine_64 = Sketch_7.addLine(5.644308024489205, -10.25641345263865, 6.15359600678713, -10.27430623369788)
+SketchLine_64.setName("SketchLine_67")
+SketchLine_64.result().setName("SketchLine_67")
+SketchLine_64.setAuxiliary(True)
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_20).coordinates(), SketchLine_64.startPoint())
+Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.endPoint())
+
+### Create SketchLine
+SketchLine_65 = Sketch_7.addLine(6.15359600678713, -10.27430623369788, 6.052762716433288, -9.549982350617446)
+SketchLine_65.setName("SketchLine_68")
+SketchLine_65.result().setName("SketchLine_68")
+SketchLine_65.setAuxiliary(True)
+Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_65.startPoint())
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_21).coordinates(), SketchLine_65.endPoint())
+
+### Create SketchLine
+SketchLine_66 = Sketch_7.addLine(5.644308024489205, -10.25641345263865, 6.052762716433288, -9.549982350617446)
+SketchLine_66.setName("SketchLine_69")
+SketchLine_66.result().setName("SketchLine_69")
+SketchLine_66.setAuxiliary(True)
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_20).coordinates(), SketchLine_66.startPoint())
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_21).coordinates(), SketchLine_66.endPoint())
+
+### Create SketchLine
+SketchLine_67 = Sketch_7.addLine(6.15359600678713, -10.27430623369788, 5.812047228248534, -9.966304921873915)
+SketchLine_67.setName("SketchLine_70")
+SketchLine_67.result().setName("SketchLine_70")
+Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_67.startPoint())
+Sketch_7.setCoincident(SketchLine_67.endPoint(), SketchLine_66.result())
+
+### Create SketchConstraintAngle
+Sketch_7.setAngle(SketchLine_67.result(), SketchLine_64.result(), "80.0626341144/2", type = "Direct")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_15 = Sketch_7.addIntersectionPoint(model.selection("EDGE", (4.375576761982357, 4.375576761982356, 9.028)), True)
+SketchIntersectionPoint_15.setName("SketchIntersectionPoint_16")
+SketchIntersectionPoint_15.result().setName("SketchIntersectionPoint_16")
+[SketchPoint_22] = SketchIntersectionPoint_15.intersectionPoints()
+SketchPoint_22.setName("SketchPoint_23")
+SketchPoint_22.result().setName("SketchPoint_23")
+
+### Create SketchLine
+SketchLine_68 = Sketch_7.addLine(6.348502432487296, -9.04671367200557, 6.160385566110681, -9.046221812193464)
+SketchLine_68.setName("SketchLine_71")
+SketchLine_68.result().setName("SketchLine_71")
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_18).coordinates(), SketchLine_68.startPoint())
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_22).coordinates(), SketchLine_68.endPoint())
+
+### Create SketchLine
+SketchLine_69 = Sketch_7.addLine(6.348502432487297, -9.046713672005572, 6.603839274138267, -9.303368522147153)
+SketchLine_69.setName("SketchLine_83")
+SketchLine_69.result().setName("SketchLine_83")
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_18).coordinates(), SketchLine_69.startPoint())
+
+### Create SketchLine
+SketchLine_70 = Sketch_7.addLine(6.603839274138267, -9.303368522147153, 6.603839274138267, -10.27548346237037)
+SketchLine_70.setName("SketchLine_85")
+SketchLine_70.result().setName("SketchLine_85")
+Sketch_7.setCoincident(SketchLine_69.endPoint(), SketchLine_70.startPoint())
+Sketch_7.setVertical(SketchLine_70.result())
+
+### Create SketchLine
+SketchLine_71 = Sketch_7.addLine(6.603839274138267, -10.27548346237037, 6.153596006787128, -10.27430623369788)
+SketchLine_71.setName("SketchLine_86")
+SketchLine_71.result().setName("SketchLine_86")
+Sketch_7.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
+Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_71.endPoint())
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_16).coordinates(), SketchLine_71.result())
+Sketch_7.setCoincident(SketchAPI_Point(SketchPoint_17).coordinates(), SketchLine_69.result())
+Sketch_7.setDistance(SketchAPI_Point(SketchPoint_16).coordinates(), SketchLine_70.result(), 0.1, True)
+model.do()
+
+### Create Filling
+Filling_2 = model.addFilling(Part_1_doc, [model.selection("EDGE", (5.836768269385303, 1.448742145032643, 10.10245863455805)), model.selection("EDGE", (4.731694417794685, 1.230193210543086, 10.89299420755799))])
+
+### Create Face
+Face_2 = model.addFace(Part_1_doc, [model.selection("COMPOUND", (6.057217334424248, 1.494374437754447, 9.641999999999889))])
+
+### Create Filling
+Filling_3 = model.addFilling(Part_1_doc, [model.selection("EDGE", (6.10275292456776, 1.489939492847348, 9.027999999999889)), model.selection("EDGE_2", (5.836768269385303, 1.448742145032643, 10.10245863455805))])
+
+### Create Symmetry
+Symmetry_4_objects = [model.selection("FACE", (4.404302746403579, 1.07007135572464, 11.07549385900559)),
+                      model.selection("FACE", (5.284231343589994, 1.339467677787865, 10.49772642105802)),
+                      model.selection("FACE", (5.969760596976531, 1.469340818939996, 9.565229317278968)),
+                      model.selection("FACE", (6.224447172944647, 1.523053813239908, 9.642254784868452))]
+Symmetry_4 = model.addSymmetry(Part_1_doc, Symmetry_4_objects, model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Symmetry
+Symmetry_5 = model.addSymmetry(Part_1_doc, [model.selection("COMPOUND", "all-in-Symmetry_4")], model.selection("FACE", "PartSet/XOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Revolution
+Revolution_7_objects = [model.selection("EDGE_9", (5.836768269385303, 1.448742145032643, 10.10245863455805)),
+                        model.selection("EDGE_5", (6.10275292456776, 1.489939492847348, 9.027999999999889)),
+                        model.selection("EDGE", (6.099428606108299, 1.49717205955577, 9.641999999999889))]
+Revolution_7 = model.addRevolution(Part_1_doc, Revolution_7_objects, model.selection("EDGE", "PartSet/OZ"), 360, 0)
+
+### Create Split
+Split_2_objects_2 = [model.selection("COMPOUND", "all-in-Revolution_7"),
+                     model.selection("COMPOUND", "all-in-Symmetry_5"),
+                     model.selection("COMPOUND", "all-in-Revolution_6"),
+                     model.selection("COMPOUND", "all-in-Symmetry_3")]
+Split_2 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_1")], Split_2_objects_2, keepSubResults = True)
+
+### Create Revolution
+Revolution_8 = model.addRevolution(Part_1_doc, [model.selection("EDGE_3", (3.8353530542367, 0.6452379374767312, 11.36897808323556)), model.selection("EDGE_5", (4.069856465567689, 0.9087626736223701, 11.24154228122667))], model.selection("EDGE", (1.641269250487042, 0, 7.083321183366995)), 360, 0)
+
+### Create Symmetry
+Symmetry_6 = model.addSymmetry(Part_1_doc, [model.selection("COMPOUND", "all-in-Revolution_8")], model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Split
+Split_3 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_2")], [model.selection("COMPOUND", "all-in-Symmetry_6")], keepSubResults = True)
+
+### Create Sketch
+Sketch_8 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
+
+### Create SketchLine
+SketchLine_72 = Sketch_8.addLine(5.126644475052088, 10.62934617154252, 5.215654385578071, 10.78090722433818)
+SketchLine_72.setName("SketchLine_74")
+SketchLine_72.result().setName("SketchLine_74")
+
+### Create SketchLine
+SketchLine_73 = Sketch_8.addLine(5.405090045827155, 10.43837553323928, 5.525091876190383, 10.61334472455802)
+SketchLine_73.setName("SketchLine_76")
+SketchLine_73.result().setName("SketchLine_76")
+
+### Create SketchLine
+SketchLine_74 = Sketch_8.addLine(6.082, 9.532, 6.535000000000001, 9.532)
+SketchLine_74.setName("SketchLine_78")
+SketchLine_74.result().setName("SketchLine_78")
+Sketch_8.setHorizontal(SketchLine_74.result())
+
+### Create SketchProjection
+SketchProjection_16 = Sketch_8.addProjection(model.selection("EDGE", (0, 4.98107223752606, 10.71483892577093)), False)
+SketchProjection_16.setName("SketchProjection_33")
+SketchProjection_16.result().setName("SketchProjection_33")
+SketchLine_75 = SketchProjection_16.createdFeature()
+SketchLine_75.setName("SketchLine_116")
+SketchLine_75.result().setName("SketchLine_116")
+
+### Create SketchProjection
+SketchProjection_17 = Sketch_8.addProjection(model.selection("EDGE", (0, 5.26586726043962, 10.5338608523909)), False)
+SketchProjection_17.setName("SketchProjection_38")
+SketchProjection_17.result().setName("SketchProjection_38")
+SketchLine_76 = SketchProjection_17.createdFeature()
+SketchLine_76.setName("SketchLine_117")
+SketchLine_76.result().setName("SketchLine_117")
+
+### Create SketchProjection
+SketchProjection_18 = Sketch_8.addProjection(model.selection("EDGE", (0, 5.540578798309692, 10.33890786998159)), False)
+SketchProjection_18.setName("SketchProjection_39")
+SketchProjection_18.result().setName("SketchProjection_39")
+SketchLine_77 = SketchProjection_18.createdFeature()
+SketchLine_77.setName("SketchLine_118")
+SketchLine_77.result().setName("SketchLine_118")
+
+### Create SketchProjection
+SketchProjection_19 = Sketch_8.addProjection(model.selection("EDGE", (0, 5.790750667181333, 10.12202136327199)), False)
+SketchProjection_19.setName("SketchProjection_40")
+SketchProjection_19.result().setName("SketchProjection_40")
+SketchBSpline_1 = SketchProjection_19.createdFeature()
+
+### Create SketchProjection
+SketchProjection_20 = Sketch_8.addProjection(model.selection("EDGE", (0, 6.534999999999997, 9.721499999999999)), False)
+SketchProjection_20.setName("SketchProjection_41")
+SketchProjection_20.result().setName("SketchProjection_41")
+SketchLine_78 = SketchProjection_20.createdFeature()
+SketchLine_78.setName("SketchLine_119")
+SketchLine_78.result().setName("SketchLine_119")
+Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_78.result())
+Sketch_8.setCoincident(SketchLine_74.startPoint(), SketchAPI_BSpline(SketchBSpline_1).startPoint())
+
+### Create SketchLine
+SketchLine_79 = Sketch_8.addLine(5.676067550792231, 10.23944020672391, 5.829536340268943, 10.44848598250872)
+SketchLine_79.setName("SketchLine_120")
+SketchLine_79.result().setName("SketchLine_120")
+Sketch_8.setCoincident(SketchAPI_Line(SketchLine_77).endPoint(), SketchLine_79.startPoint())
+
+### Create SketchProjection
+SketchProjection_21 = Sketch_8.addProjection(model.selection("EDGE", (0, 5.551250000000013, 10.59917992310999)), False)
+SketchProjection_21.setName("SketchProjection_42")
+SketchProjection_21.result().setName("SketchProjection_42")
+SketchLine_80 = SketchProjection_21.createdFeature()
+SketchLine_80.setName("SketchLine_121")
+SketchLine_80.result().setName("SketchLine_121")
+Sketch_8.setCoincident(SketchLine_79.endPoint(), SketchLine_80.result())
+Sketch_8.setPerpendicular(SketchLine_79.result(), SketchLine_77.result())
+Sketch_8.setPerpendicular(SketchLine_73.result(), SketchLine_76.result())
+Sketch_8.setPerpendicular(SketchLine_72.result(), SketchLine_75.result())
+Sketch_8.setCoincident(SketchLine_73.startPoint(), SketchAPI_Line(SketchLine_76).endPoint())
+Sketch_8.setCoincident(SketchLine_72.startPoint(), SketchAPI_Line(SketchLine_75).endPoint())
+Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_80.result())
+Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_80.result())
+model.do()
+
+### Create Revolution
+Revolution_9 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", (0, 5.830822237526045, 10.15645361216909))], model.selection("EDGE", "PartSet/OZ"), 360, 0, "Edges")
+
+### Create Split
+Split_4 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_3")], [model.selection("COMPOUND", "all-in-Revolution_9")], keepSubResults = True)
+
+### Create Sketch
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", (-3.890999999999999, 3.891, -6.45)))
+
+### Create SketchLine
+SketchLine_81 = Sketch_9.addLine(5.502704971193711, -5.502704971193713, 3.192087844797337, -3.192087844797337)
+SketchLine_81.setName("SketchLine_87")
+SketchLine_81.result().setName("SketchLine_87")
+
+### Create SketchProjection
+SketchProjection_22 = Sketch_9.addProjection(model.selection("EDGE", (5.502704971193713, 5.502704971193712, -6.45)), False)
+SketchProjection_22.setName("SketchProjection_26")
+SketchProjection_22.result().setName("SketchProjection_26")
+SketchArc_13 = SketchProjection_22.createdFeature()
+Sketch_9.setCoincident(SketchLine_81.startPoint(), SketchArc_13.results()[1])
+
+### Create SketchLine
+SketchLine_82 = Sketch_9.addLine(3.192087844797337, -3.192087844797337, 3.891, 0)
+SketchLine_82.setName("SketchLine_88")
+SketchLine_82.result().setName("SketchLine_88")
+Sketch_9.setCoincident(SketchLine_81.endPoint(), SketchLine_82.startPoint())
+
+### Create SketchProjection
+SketchProjection_23 = Sketch_9.addProjection(model.selection("EDGE", (3.891, 0, -6.45)), False)
+SketchProjection_23.setName("SketchProjection_27")
+SketchProjection_23.result().setName("SketchProjection_27")
+SketchLine_83 = SketchProjection_23.createdFeature()
+SketchLine_83.setName("SketchLine_89")
+SketchLine_83.result().setName("SketchLine_89")
+Sketch_9.setCoincident(SketchLine_82.endPoint(), SketchLine_83.result())
+
+### Create SketchLine
+SketchLine_84 = Sketch_9.addLine(3.192087844797337, -3.192087844797337, 0, -3.891)
+SketchLine_84.setName("SketchLine_90")
+SketchLine_84.result().setName("SketchLine_90")
+Sketch_9.setCoincident(SketchLine_81.endPoint(), SketchLine_84.startPoint())
+
+### Create SketchProjection
+SketchProjection_24 = Sketch_9.addProjection(model.selection("EDGE", (0, 3.891, -6.45)), False)
+SketchProjection_24.setName("SketchProjection_28")
+SketchProjection_24.result().setName("SketchProjection_28")
+SketchLine_85 = SketchProjection_24.createdFeature()
+SketchLine_85.setName("SketchLine_91")
+SketchLine_85.result().setName("SketchLine_91")
+Sketch_9.setCoincident(SketchLine_84.endPoint(), SketchLine_85.result())
+Sketch_9.setEqual(SketchLine_84.result(), SketchLine_81.result())
+Sketch_9.setEqual(SketchLine_81.result(), SketchLine_82.result())
+Sketch_9.setMiddlePoint(SketchLine_84.endPoint(), SketchLine_85.result())
+Sketch_9.setMiddlePoint(SketchLine_82.endPoint(), SketchLine_83.result())
+Sketch_9.setMiddlePoint(SketchLine_81.startPoint(), SketchArc_13.results()[1])
+
+### Create SketchMultiRotation
+SketchMultiRotation_1_objects = [SketchLine_81.result(), SketchLine_84.result(), SketchLine_82.result()]
+SketchMultiRotation_1 = Sketch_9.addRotation(SketchMultiRotation_1_objects, SketchAPI_Line(SketchLine_83).endPoint(), 360, 4, True)
+[SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89, SketchLine_90, SketchLine_91, SketchLine_92, SketchLine_93, SketchLine_94] = SketchMultiRotation_1.rotatedList()
+SketchLine_94.setName("SketchLine_100")
+SketchLine_94.result().setName("SketchLine_100")
+SketchLine_93.setName("SketchLine_99")
+SketchLine_93.result().setName("SketchLine_99")
+SketchLine_92.setName("SketchLine_98")
+SketchLine_92.result().setName("SketchLine_98")
+SketchLine_91.setName("SketchLine_97")
+SketchLine_91.result().setName("SketchLine_97")
+SketchLine_90.setName("SketchLine_96")
+SketchLine_90.result().setName("SketchLine_96")
+SketchLine_89.setName("SketchLine_95")
+SketchLine_89.result().setName("SketchLine_95")
+SketchLine_88.setName("SketchLine_94")
+SketchLine_88.result().setName("SketchLine_94")
+SketchLine_87.setName("SketchLine_93")
+SketchLine_87.result().setName("SketchLine_93")
+SketchLine_86.setName("SketchLine_92")
+SketchLine_86.result().setName("SketchLine_92")
+model.do()
+
+### Create Extrusion
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", (0, 0, -6.45))], model.selection(), model.selection("FACE", (3.094, 3.094, -3.45)), 0, model.selection(), 0, "Edges")
+
+### Create Plane
+Plane_8 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OZ"), model.selection("VERTEX", (-6.194859104310897, -1.509005194735372, 9.02799999999989)), False)
+
+### Create Split
+Split_5 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_4")], [model.selection("COMPOUND", "all-in-Extrusion_3")], keepSubResults = True)
+
+### Create Sketch
+Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", (-3.097429552155449, -0.754502597367686, 50)))
+
+### Create SketchProjection
+SketchProjection_25 = Sketch_10.addProjection(model.selection("VERTEX", (-6.194859104310897, -1.509005194735372, 9.02799999999989)), False)
+SketchProjection_25.setName("SketchProjection_35")
+SketchProjection_25.result().setName("SketchProjection_35")
+SketchPoint_23 = SketchProjection_25.createdFeature()
+SketchPoint_23.setName("SketchPoint_27")
+SketchPoint_23.result().setName("SketchPoint_27")
+
+### Create SketchLine
+SketchLine_95 = Sketch_10.addLine(-7.781999999999998, -3.45, -3.801997755365569, -3.45)
+SketchLine_95.setName("SketchLine_107")
+SketchLine_95.result().setName("SketchLine_107")
+
+### Create SketchLine
+SketchLine_96 = Sketch_10.addLine(-6.188000000000001, -3.45, -6.538000000000001, -3.45)
+SketchLine_96.setName("SketchLine_108")
+SketchLine_96.result().setName("SketchLine_108")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_16 = Sketch_10.addIntersectionPoint(model.selection("EDGE", (-7.189630522002833, -2.978042470665128, -3.45)), True)
+SketchIntersectionPoint_16.setName("SketchIntersectionPoint_17")
+SketchIntersectionPoint_16.result().setName("SketchIntersectionPoint_17")
+[SketchPoint_24] = SketchIntersectionPoint_16.intersectionPoints()
+SketchPoint_24.setName("SketchPoint_25")
+SketchPoint_24.result().setName("SketchPoint_25")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_17 = Sketch_10.addIntersectionPoint(model.selection("EDGE", (-3.541543922398668, -1.596043922398668, -3.45)), True)
+SketchIntersectionPoint_17.setName("SketchIntersectionPoint_18")
+SketchIntersectionPoint_17.result().setName("SketchIntersectionPoint_18")
+[SketchPoint_25] = SketchIntersectionPoint_17.intersectionPoints()
+SketchPoint_25.setName("SketchPoint_26")
+SketchPoint_25.result().setName("SketchPoint_26")
+Sketch_10.setCoincident(SketchLine_95.startPoint(), SketchAPI_Point(SketchPoint_24).coordinates())
+Sketch_10.setCoincident(SketchLine_95.endPoint(), SketchAPI_Point(SketchPoint_25).coordinates())
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_18 = Sketch_10.addIntersectionPoint(model.selection("EDGE", (-6.04032438355878, -2.501984280802992, -3.45)), True)
+SketchIntersectionPoint_18.setName("SketchIntersectionPoint_19")
+SketchIntersectionPoint_18.result().setName("SketchIntersectionPoint_19")
+[SketchPoint_26] = SketchIntersectionPoint_18.intersectionPoints()
+SketchPoint_26.setName("SketchPoint_28")
+SketchPoint_26.result().setName("SketchPoint_28")
+
+### Create SketchIntersectionPoint
+SketchIntersectionPoint_19 = Sketch_10.addIntersectionPoint(model.selection("EDGE", (-5.716966547179859, -2.368045079475137, -3.45)), True)
+SketchIntersectionPoint_19.setName("SketchIntersectionPoint_20")
+SketchIntersectionPoint_19.result().setName("SketchIntersectionPoint_20")
+[SketchPoint_27] = SketchIntersectionPoint_19.intersectionPoints()
+SketchPoint_27.setName("SketchPoint_29")
+SketchPoint_27.result().setName("SketchPoint_29")
+Sketch_10.setCoincident(SketchAPI_Point(SketchPoint_26).coordinates(), SketchLine_96.endPoint())
+Sketch_10.setCoincident(SketchAPI_Point(SketchPoint_27).coordinates(), SketchLine_96.startPoint())
+model.do()
+Sketch_10.result().setName("Sketch_10_Copy")
+
+### Create Filling
+Filling_4 = model.addFilling(Part_1_doc, [model.selection("EDGE", (-6.182228431732952, -1.505928490291867, -3.45)), model.selection("EDGE", (-6.10275292456776, -1.489939492847349, 9.027999999999889))])
+
+### Create Extrusion
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("EDGE", (-5.627449338075726, -1.370789898733462, -3.45))], model.selection("EDGE", "PartSet/OZ"), model.selection("FACE", (-5.487043922398668, -2.751352485596856, -6.45)), 0, model.selection(), 0)
+
+### Create Sketch
+Sketch_11 = model.addSketch(Part_1_doc, model.selection("FACE", (0, 0, -6.45)))
+
+### Create SketchLine
+SketchLine_97 = Sketch_11.addLine(-3.693983753048041, 0.8998171836933224, 0, 1.098155695798001)
+SketchLine_97.setName("SketchLine_111")
+SketchLine_97.result().setName("SketchLine_111")
+
+### Create SketchProjection
+SketchProjection_26 = Sketch_11.addProjection(model.selection("VERTEX", (-3.693983753041943, -0.8998171836917707, -6.45)), False)
+SketchProjection_26.setName("SketchProjection_34")
+SketchProjection_26.result().setName("SketchProjection_34")
+SketchPoint_28 = SketchProjection_26.createdFeature()
+SketchPoint_28.setName("SketchPoint_30")
+SketchPoint_28.result().setName("SketchPoint_30")
+Sketch_11.setCoincident(SketchLine_97.startPoint(), SketchPoint_28.result())
+
+### Create SketchProjection
+SketchProjection_27 = Sketch_11.addProjection(model.selection("EDGE", (0, -1.9455, -6.45)), False)
+SketchProjection_27.setName("SketchProjection_29")
+SketchProjection_27.result().setName("SketchProjection_29")
+SketchLine_98 = SketchProjection_27.createdFeature()
+SketchLine_98.setName("SketchLine_101")
+SketchLine_98.result().setName("SketchLine_101")
+Sketch_11.setCoincident(SketchLine_97.endPoint(), SketchLine_98.result())
+Sketch_11.setDistance(SketchAPI_Line(SketchLine_98).startPoint(), SketchLine_97.result(), "0.921*3.891/3.268", True)
+model.do()
+
+### Create Extrusion
+Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", (-1.846991876524021, -0.9989864397456618, -6.45))], model.selection("EDGE", "PartSet/OZ"), model.selection("FACE", (-1.9455, -1.9455, -3.45)), 0, model.selection(), 0, "Edges")
+
+### Create Symmetry
+Symmetry_7_objects = [model.selection("FACE", (-1.846991876524021, -0.9989864397456617, -4.95)),
+                      model.selection("FACE", (-5.627449338075726, -1.370789898733462, -4.95)),
+                      model.selection("FACE", (-6.142490678150356, -1.497933991569608, 2.788999999999944))]
+Symmetry_7 = model.addSymmetry(Part_1_doc, Symmetry_7_objects, model.selection("FACE", "PartSet/YOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Symmetry
+Symmetry_8 = model.addSymmetry(Part_1_doc, [model.selection("COMPOUND", "all-in-Symmetry_7")], model.selection("FACE", "PartSet/XOZ"), keepOriginal = True, keepSubResults = True)
+
+### Create Split
+Split_6 = model.addSplit(Part_1_doc, [model.selection("COMPOUND", "all-in-Split_5")], [model.selection("COMPOUND", "all-in-Symmetry_8")], keepSubResults = True)
+
+model.end()
+
+from GeomAPI import *
+
+model.testNbResults(Split_6, 1)
+model.testNbSubResults(Split_6, [116])
+model.testNbSubShapes(Split_6, GeomAPI_Shape.SOLID, [116])
+model.testNbSubShapes(Split_6, GeomAPI_Shape.FACE, [856])
+model.testNbSubShapes(Split_6, GeomAPI_Shape.EDGE, [3636])
+model.testNbSubShapes(Split_6, GeomAPI_Shape.VERTEX, [7272])
+model.testResultsVolumes(Split_6, [612.72746616262998])
+
+assert(model.checkPythonDump())

diff --git a/src/FeaturesPlugin/tests.set b/src/FeaturesPlugin/tests.set
index 794e05d100082e6d165b929bd8c18d29af453d6e..302daa49b67a6459e6ff2410055b39c5248cbeba 100644 (file)
--- a/src/FeaturesPlugin/tests.set
+++ b/src/FeaturesPlugin/tests.set
@@ -519,6 +519,7 @@ SET(TEST_NAMES_PARA
                Test20245_1.py
                Test20245_2.py
                Test20245_3.py
+               Test20245_3_geometrical.py
                Test20247.py
                Test22847.py
                TestPointCoordinates.py