X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=test.models%2Fflange.py;fp=test.models%2Fflange.py;h=13e8585c133433ee6e99c7c4ab8905e8881db5a8;hb=2c2b4d9c92bdbeb304940997c85814389880d784;hp=0000000000000000000000000000000000000000;hpb=1f3deb9b94fe9fe6ba767700f874c1a82d34bb06;p=modules%2Fshaper.git

diff --git a/test.models/flange.py b/test.models/flange.py
new file mode 100644
index 000000000..13e8585c1
--- /dev/null
+++ b/test.models/flange.py
@@ -0,0 +1,154 @@
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "dint", "58")
+model.addParameter(Part_1_doc, "thick", "16")
+model.addParameter(Part_1_doc, "length", "172")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchArc_1 = Sketch_1.addArc(-1.656176621148808e-020, 61, -36.69142117459658, 34.94736842105263, -1.927105092898643e-024, 106, True)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.center())
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_3 = Sketch_1.addLine(-46.47580015448901, 16.00000000000001, -86, 16)
+SketchLine_4 = Sketch_1.addLine(-86, 16, -86, -1.232595164407831e-032)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(-86, -1.232595164407831e-032, -46.47580015448901, 7.497132070176856e-024)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchArc_2 = Sketch_1.addArc(5.604803279647422e-025, 61, -23.64558253474002, 44.21052631578948, -7.759334428649666e-022, 90, True)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.center(), SketchArc_2.center())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_4.result())
+SketchArc_3 = Sketch_1.addArc(-46.47580015448901, 28.00000000000001, -36.69142117459658, 34.94736842105264, -46.47580015448901, 16.00000000000001, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchArc_3.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchArc_3.endPoint())
+SketchArc_4 = Sketch_1.addArc(-46.475800154489, 28, -23.64558253474002, 44.21052631578947, -46.475800154489, -2.594279994652913e-031, True)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_4.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_5.endPoint())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 12)
+SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
+SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_3.results()[1])
+SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_4.center(), SketchArc_3.center())
+SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_5.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_5.result(), 61)
+SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_2.results()[1])
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), "thick")
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.result())
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.result(), "length/2")
+SketchConstraintMirror_1_objects = [SketchArc_2.results()[1], SketchArc_4.results()[1], SketchLine_5.result(), SketchLine_4.result(), SketchLine_3.result(), SketchArc_3.results()[1], SketchArc_1.results()[1]]
+SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects)
+[SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored()
+SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2")
+SketchConstraintRadius_2.setName("SketchConstraintRadius_5")
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchArc_9 = Sketch_2.addArc(-0.6283186887989762, 106, 0, 78.00705060867459, 0, 133.9929493913254, True)
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28)
+SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
+SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchArc_9.center(), SketchLine_9.result(), "61+dint/2+thick")
+SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result())
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_10.result())
+SketchLine_11 = Sketch_2.addLine(0, 78.00705060867459, 0, 133.9929493913254)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint())
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
+SketchLine_12 = Sketch_3.addLine(2.220446049250313e-016, 106, -4, 106)
+SketchLine_13 = Sketch_3.addLine(-4, 106, -4, 67.34428877022477)
+SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_12.result())
+SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_13.result())
+SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintDistance_4 = Sketch_3.setDistance(SketchPoint_1.coordinates(), SketchLine_12.result(), "61+90/2")
+SketchConstraintDistance_4.setName("SketchConstraintDistance_5")
+SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchLine_14.setName("SketchLine_15")
+SketchLine_14.result().setName("SketchLine_15")
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_12.startPoint(), SketchLine_14.result())
+SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20")
+SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_12.result(), "8/2")
+SketchArc_10 = Sketch_3.addArc(0, 61, -4, 67.34428877022477, 4, 67.34428877022477, False)
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.result(), SketchArc_10.center())
+SketchConstraintRadius_4 = Sketch_3.setRadius(SketchArc_10.results()[1], "15/2")
+SketchConstraintRadius_4.setName("SketchConstraintRadius_6")
+SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
+SketchLine_15.setName("SketchLine_16")
+SketchLine_15.result().setName("SketchLine_16")
+SketchConstraintDistance_5 = Sketch_3.setDistance(SketchArc_10.center(), SketchLine_15.result(), 61)
+SketchConstraintDistance_5.setName("SketchConstraintDistance_6")
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchArc_10.startPoint())
+SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
+SketchConstraintMirror_2 = Sketch_3.addMirror(SketchLine_14.result(), [SketchLine_13.result(), SketchLine_12.result()])
+[SketchLine_16, SketchLine_17] = SketchConstraintMirror_2.mirrored()
+SketchLine_17.setName("SketchLine_18")
+SketchLine_17.result().setName("SketchLine_18")
+SketchLine_16.setName("SketchLine_17")
+SketchLine_16.result().setName("SketchLine_17")
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
+SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
+Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)
+SketchLine_18.setName("SketchLine_19")
+SketchLine_18.result().setName("SketchLine_19")
+SketchLine_18.setAuxiliary(True)
+SketchConstraintVertical_3 = Sketch_4.setVertical(SketchLine_18.result())
+SketchConstraintLength_3 = Sketch_4.setLength(SketchLine_18.result(), 32)
+SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_2.coordinates(), SketchLine_18.result(), "130/2")
+SketchConstraintDistance_6.setName("SketchConstraintDistance_7")
+SketchPoint_3 = Sketch_4.addPoint(-65, 0)
+SketchPoint_3.setAuxiliary(True)
+SketchConstraintMiddle_1 = Sketch_4.setMiddlePoint(SketchPoint_3.coordinates(), SketchLine_18.result())
+SketchLine_19 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
+SketchLine_19.setName("SketchLine_20")
+SketchLine_19.result().setName("SketchLine_20")
+SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchPoint_3.coordinates(), SketchLine_19.result())
+SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
+SketchArc_11 = Sketch_4.addArc(-65, 16, -59, 16, -71, 16, False)
+SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_18.startPoint(), SketchArc_11.center())
+SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
+SketchArc_12 = Sketch_4.addArc(-65, -16, -59, -16.00003459934639, -71, -16, True)
+SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchArc_12.center())
+SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
+SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_11.results()[1], 6)
+SketchConstraintRadius_5.setName("SketchConstraintRadius_7")
+SketchLine_20 = Sketch_4.addLine(-71, 16, -71, -16)
+SketchLine_20.setName("SketchLine_21")
+SketchLine_20.result().setName("SketchLine_21")
+SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchArc_11.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
+SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_20.endPoint())
+SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
+SketchLine_21 = Sketch_4.addLine(-59, 16, -59, -16.00003459934639)
+SketchLine_21.setName("SketchLine_22")
+SketchLine_21.result().setName("SketchLine_22")
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchArc_11.startPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
+SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_12.startPoint(), SketchLine_21.endPoint())
+SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
+SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_20.result())
+SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_21.result())
+SketchConstraintTangent_5 = Sketch_4.setTangent(SketchLine_20.result(), SketchArc_11.results()[1])
+SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1])
+SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result())
+model.do()
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0)
+MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_2"), -130, 2)
+Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")])
+model.do()
+model.end()