X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2Fplugin-Sketch.xml;h=8d111edbbc9af14d56a744e9149495feaaaf52e6;hb=e8b0963c64ad81be042fffe660ce874ae4d3abd5;hp=3fdd8c0ce36c7b9f7becc2b5d543a947d737b2c2;hpb=52c2a94c9d3be46e59b9952f7cd6e1efdb129001;p=modules%2Fshaper.git

diff --git a/src/SketchPlugin/plugin-Sketch.xml b/src/SketchPlugin/plugin-Sketch.xml
index 3fdd8c0ce..8d111edbb 100644
--- a/src/SketchPlugin/plugin-Sketch.xml
+++ b/src/SketchPlugin/plugin-Sketch.xml
@@ -1,24 +1,3 @@
-<!--
-Copyright (C) 2014-2017  CEA/DEN, EDF R&D
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Lesser General Public
-License as published by the Free Software Foundation; either
-version 2.1 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Lesser General Public License for more details.
-
-You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-See http:##www.salome-platform.org/ or
-email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
--->
-
 <plugin>
   <workbench id="Sketch">
     <group id="Linear geometry">
@@ -26,6 +5,8 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         id="Sketch"
         nested="SketchPoint SketchIntersectionPoint SketchLine
                 SketchCircle SketchMacroCircle SketchArc SketchMacroArc
+                SketchEllipse SketchMacroEllipse SketchEllipticArc SketchMacroEllipticArc
+                SketchBSpline SketchMacroBSpline SketchMacroBSplinePeriodic SketchBSplinePeriodic
                 SketchRectangle
                 SketchProjection
                 SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintDistanceHorizontal SketchConstraintDistanceVertical
@@ -33,7 +14,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                 SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical
                 SketchConstraintEqual SketchConstraintTangent
                 SketchFillet SketchSplit SketchTrim
-                SketchConstraintCoincidence
+                SketchConstraintCoincidence SketchConstraintCoincidenceInternal
                 SketchConstraintMirror SketchConstraintAngle
                 SketchMultiRotation SketchMultiTranslation
                 SketchConstraintCollinear SketchConstraintMiddle"
@@ -42,11 +23,10 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         tooltip="Create sketch"
         icon="icons/Sketch/sketch.png"
         helpfile="SketchPlugin.html">
-        <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
+        <sketch-start-label id="External" geometrical_selection="true" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
           <validator id="GeomValidators_Face" parameters="plane"/>
         </sketch-start-label>
-        <label id="SolverDOF"/>
-        <label id="SolverError" styleSheet="color : red; font : bold"/>
+        <undo_label id="SolverError" isHTML="true" />
         <validator id="SketchPlugin_SolverErrorValidator"/>
       </feature>
 
@@ -55,7 +35,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                 helpfile="pointFeature.html">
         <sketch-2dpoint_selector id="PointCoordinates" accept_expressions="0" title="Point" tooltip="Point coordinates"
                                  enable_value="enable_by_preferences"/>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
       </feature>
 
       <!-- SketchLine -->
@@ -65,13 +45,13 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                                  enable_value="enable_by_preferences"/>
         <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"
                                  enable_value="enable_by_preferences"/>
-        <labelvalue id="LineLength" accept_expressions="0" label="Length:" default="computed" icon="icons/Sketch/distance_value.png"
+        <labelvalue id="LineLength" accept_expressions="0" label="Length" default="computed" icon="icons/Sketch/distance_value.png"
                      tooltip="Line length" obligatory="0" enable_value="false"/>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
         <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
       </feature>
     </group>
-    <group id="Circular geometry">
+    <group id="Conical geometry">
       <!-- SketchCircle is a hidden feature. It is created inside SketchMacroCircle. -->
       <feature id="SketchCircle"
                title="Circle"
@@ -85,13 +65,13 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                                  enable_value="enable_by_preferences"/>
         <labelvalue id="circle_radius"
                     icon="icons/Sketch/radius.png"
-                    label="Radius:"
+                    label="Radius"
                     tooltip="Set radius"
                     default="computed"
                     accept_expressions="0"
                     enable_value="enable_by_preferences">
         </labelvalue>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
       </feature>
       <!-- SketchMacroCircle -->
       <feature id="SketchMacroCircle"
@@ -150,19 +130,19 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </toolbox>
         <labelvalue id="circle_radius"
                     icon="icons/Sketch/radius.png"
-                    label="Radius:"
+                    label="Radius"
                     tooltip="Set radius"
                     default="computed"
                     accept_expressions="0"
                     obligatory="0"
                     enable_value="enable_by_preferences">
-          <validator id="GeomValidators_Positive"/>
         </labelvalue>
         <boolvalue id="Auxiliary"
                    tooltip="Construction element"
                    label="Auxiliary"
                    default="false"
-                   obligatory="0"/>
+                   obligatory="0"
+                   change_visual_attributes="true"/>
       </feature>
 
       <!-- SketchArc -->
@@ -189,7 +169,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         <validator id="GeomValidators_Different" parameters="center_point,start_point,end_point"/>
         <labelvalue id="radius"
                     icon="icons/Sketch/radius.png"
-                    label="Radius:"
+                    label="Radius"
                     tooltip="Set radius"
                     accept_expressions="0"
                     min="0"
@@ -199,7 +179,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </labelvalue>
         <labelvalue id="angle"
                     icon="icons/Sketch/angle.png"
-                    label="Angle:"
+                    label="Angle"
                     tooltip="Set angle"
                     default="0"
                     use_reset="false"
@@ -209,7 +189,8 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                    label="Auxiliary"
                    tooltip="Construction element"
                    default="false"
-                   obligatory="0"/>
+                   obligatory="0"
+                   change_visual_attributes="true"/>
       </feature>
 
       <!-- SketchMacroArc -->
@@ -293,10 +274,28 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
               <validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
             </sketch-2dpoint_selector>
           </box>
+          <box id="by_transversal_line"
+               icon="icons/Sketch/arc_perp_32x32.png"
+               title="Perpendicular to line">
+            <sketch_shape_selector id="transversal_point"
+                                   label="Point on the perpendicular line"
+                                   tooltip="Select point on line"
+                                   shape_types="vertex">
+              <validator id="SketchPlugin_ArcTransversalPoint"/>
+            </sketch_shape_selector>
+            <sketch-2dpoint_selector id="end_point_4"
+                                     reference_attribute="end_point_ref"
+                                     title="End point"
+                                     tooltip="End point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
+            </sketch-2dpoint_selector>
+          </box>
         </toolbox>
         <labelvalue id="radius"
                     icon="icons/Sketch/radius.png"
-                    label="Radius:"
+                    label="Radius"
                     tooltip="Set radius"
                     accept_expressions="0"
                     min="0"
@@ -306,7 +305,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </labelvalue>
         <labelvalue id="angle"
                     icon="icons/Sketch/angle.png"
-                    label="Angle:"
+                    label="Angle"
                     tooltip="Set angle"
                     default="0"
                     use_reset="false"
@@ -316,13 +315,14 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                    label="Auxiliary"
                    tooltip="Construction element"
                    default="false"
-                   obligatory="0"/>
+                   obligatory="0"
+                   change_visual_attributes="true"/>
       </feature>
 
       <!--  SketchFillet  -->
       <feature id="SketchFillet"
                title="Fillet"
-               tooltip="Create constraint defining fillet between two objects"
+               tooltip="Create constraint defining fillet between two connected segments"
                icon="icons/Sketch/fillet.png"
                helpfile="filletFeature.html">
         <sketch_shape_selector id="fillet_point"
@@ -333,42 +333,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </sketch_shape_selector>
         <!--<validator id="PartSet_FilletSelection"/>-->
       </feature>
-      <!--  SketchSplit  -->
-      <feature id="SketchSplit" title="Split"
-               tooltip="Cut selected segment arc or circle on existing coincident points"
-               icon="icons/Sketch/split.png"
-               helpfile="splitFeature.html">
-        <sketch_feature_point_selector
-            id="SelectedObject"
-            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
-            label="Segment"
-            tooltip="Select segment for split"
-            shape_types="edge"
-            use_external="false">
-          <validator id="SketchPlugin_SplitValidator"/>
-        </sketch_feature_point_selector>
-        <validator id="PartSet_SplitSelection"/>
-      </feature>
-      <!--  SketchTrim  -->
-      <feature id="SketchTrim" title="Trim"
-               tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
-               icon="icons/Sketch/trim.png"
-               helpfile="trimFeature.html">
-        <sketch_feature_point_selector
-            id="SelectedObject"
-            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
-            label="Segment"
-            tooltip="Select segment for trim"
-            shape_types="edge"
-            use_external="false">
-          <validator id="SketchPlugin_TrimValidator"/>
-        </sketch_feature_point_selector>
-        <validator id="PartSet_SplitSelection"/>
-      </feature>
-    </group>
 
-<excluded>
-    <group id="Elliptic geometry">
       <!-- SketchEllipse is a hidden feature. It is created inside SketchMacroEllipse. -->
       <feature id="SketchEllipse"
                title="Ellipse"
@@ -380,28 +345,53 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                                  tooltip="Center coordinates"
                                  accept_expressions="0"
                                  enable_value="enable_by_preferences"/>
-        <sketch-2dpoint_selector id="ellipse_focus"
-                                 title="Focus"
+        <sketch-2dpoint_selector id="ellipse_first_focus"
+                                 title="First focus"
+                                 tooltip="Focus coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_second_focus"
+                                 title="Second focus"
                                  tooltip="Focus coordinates"
                                  accept_expressions="0"
                                  enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_major_axis_start_point"
+                                 title="Major axis start"
+                                 tooltip="Coordinates of point on negative direction of major axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_major_axis_end_point"
+                                 title="Major axis end"
+                                 tooltip="Coordinates of point on positive direction of major axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_minor_axis_start_point"
+                                 title="Minor axis start"
+                                 tooltip="Coordinates of point on negative direction of minor axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_minor_axis_end_point"
+                                 title="Minor axis end"
+                                 tooltip="Coordinates of point on positive direction of minor axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
         <labelvalue id="ellipse_major_radius"
-                    icon="icons/Sketch/radius.png"
-                    label="Major radius:"
+                    icon="icons/Sketch/radius_major.png"
+                    label="Major radius"
                     tooltip="Set major radius"
                     default="computed"
                     accept_expressions="0"
                     enable_value="enable_by_preferences">
         </labelvalue>
         <labelvalue id="ellipse_minor_radius"
-                    icon="icons/Sketch/radius.png"
-                    label="Minor radius:"
+                    icon="icons/Sketch/radius_minor.png"
+                    label="Minor radius"
                     tooltip="Set minor radius"
                     default="computed"
                     accept_expressions="0"
                     enable_value="enable_by_preferences">
         </labelvalue>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
       </feature>
       <!-- SketchMacroEllipse -->
       <feature id="SketchMacroEllipse"
@@ -409,8 +399,159 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                title="Ellipse"
                tooltip="Create ellipse"
                helpfile="ellipseFeature.html">
-        <sketch-2dpoint_selector id="center_point"
-                                 reference_attribute="center_point_ref"
+        <toolbox id="ellipse_type" modified_in_edit="edit_ellipse_type">
+          <box id="by_center_axis_point"
+               icon="icons/Sketch/ellipse_cent_rad_32x32.png"
+               title="Center, major semi-axis and passing point">
+            <sketch-2dpoint_selector id="first_point"
+                                     reference_attribute="first_point_ref"
+                                     title="Center point"
+                                     tooltip="Center point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="second_point"
+                                     reference_attribute="second_point_ref"
+                                     title="Major axis point"
+                                     tooltip="Major axis point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="passed_point"
+                                     reference_attribute="passed_point_ref"
+                                     title="Passed point"
+                                     tooltip="Passed point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <validator id="GeomValidators_Different" parameters="first_point,second_point,passed_point"/>
+            <validator id="SketchPlugin_DifferentPointReference" parameters="first_point_ref,second_point_ref"/>
+          </box>
+          <box id="by_major_axis_and_point"
+               icon="icons/Sketch/ellipse_axes_32x32.png"
+               title="Major axis and passing point">
+            <sketch-2dpoint_selector id="first_point_1"
+                                     reference_attribute="first_point_ref_1"
+                                     title="Major axis start point"
+                                     tooltip="Major axis start point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="second_point_1"
+                                     reference_attribute="second_point_ref_1"
+                                     title="Major axis end point"
+                                     tooltip="Major axis end point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="passed_point_1"
+                                     reference_attribute="passed_point_ref_1"
+                                     title="Passed point"
+                                     tooltip="Passed point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <validator id="GeomValidators_Different" parameters="first_point_1,second_point_1,passed_point_1"/>
+            <validator id="SketchPlugin_DifferentPointReference" parameters="first_point_ref_1,second_point_ref_1"/>
+          </box>
+        </toolbox>
+        <labelvalue id="major_radius"
+                    icon="icons/Sketch/radius_major.png"
+                    label="Major radius"
+                    tooltip="Set major radius"
+                    default="computed"
+                    accept_expressions="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <labelvalue id="minor_radius"
+                    icon="icons/Sketch/radius_minor.png"
+                    label="Minor radius"
+                    tooltip="Set minor radius"
+                    default="computed"
+                    accept_expressions="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <boolvalue id="Auxiliary"
+                   tooltip="Construction element"
+                   label="Auxiliary"
+                   default="false"
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+      </feature>
+
+      <!-- SketchEllipticArc is a hidden feature. It is created inside SketchMacroEllipse. -->
+      <feature id="SketchEllipticArc"
+               title="Elliptic arc"
+               tooltip="Create elliptic arc"
+               icon="icons/Sketch/elliptic_arc.png"
+               internal="1">
+        <sketch-2dpoint_selector id="ellipse_center"
+                                 title="Center"
+                                 tooltip="Center coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_first_focus"
+                                 title="First focus"
+                                 tooltip="Focus coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_second_focus"
+                                 title="Second focus"
+                                 tooltip="Focus coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_major_axis_start_point"
+                                 title="Major axis start"
+                                 tooltip="Coordinates of point on negative direction of major axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_major_axis_end_point"
+                                 title="Major axis end"
+                                 tooltip="Coordinates of point on positive direction of major axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_minor_axis_start_point"
+                                 title="Minor axis start"
+                                 tooltip="Coordinates of point on negative direction of minor axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_minor_axis_end_point"
+                                 title="Minor axis end"
+                                 tooltip="Coordinates of point on positive direction of minor axis"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="start_point"
+                                 title="Start point"
+                                 tooltip="Arc start point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="end_point"
+                                 title="End point"
+                                 tooltip="Arc end point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <labelvalue id="ellipse_major_radius"
+                    icon="icons/Sketch/radius_major.png"
+                    label="Major radius"
+                    tooltip="Set major radius"
+                    default="computed"
+                    accept_expressions="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <labelvalue id="ellipse_minor_radius"
+                    icon="icons/Sketch/radius_minor.png"
+                    label="Minor radius"
+                    tooltip="Set minor radius"
+                    default="computed"
+                    accept_expressions="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
+      </feature>
+      <!-- SketchMacroEllipticArc -->
+      <feature id="SketchMacroEllipticArc"
+               icon="icons/Sketch/elliptic_arc.png"
+               title="Elliptic arc"
+               tooltip="Create elliptic arc"
+               helpfile="ellipseFeature.html">
+        <sketch-2dpoint_selector id="center"
+                                 reference_attribute="center_ref"
                                  title="Center point"
                                  tooltip="Center point coordinates"
                                  accept_expressions="0"
@@ -421,43 +562,181 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
                                  tooltip="Major axis point coordinates"
                                  accept_expressions="0"
                                  enable_value="enable_by_preferences"/>
-        <sketch-2dpoint_selector id="passed_point"
-                                 reference_attribute="passed_point_ref"
-                                 title="Passed point"
-                                 tooltip="Passed point coordinates"
+        <sketch-2dpoint_selector id="start_point"
+                                 reference_attribute="start_point_ref"
+                                 title="Start point"
+                                 tooltip="Arc start point coordinates"
                                  accept_expressions="0"
-                                 enable_value="enable_by_preferences">
-<!--          <validator id="SketchPlugin_CirclePassedPointValidator"/> -->
-        </sketch-2dpoint_selector>
-<!--        <validator id="GeomValidators_Different" parameters="center_point_ref,passed_point_ref"/> -->
-        <labelvalue id="ellipse_major_radius"
-                    icon="icons/Sketch/radius.png"
-                    label="Major radius:"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="end_point"
+                                 reference_attribute="end_point_ref"
+                                 title="End point"
+                                 tooltip="Arc end point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <labelvalue id="major_radius"
+                    icon="icons/Sketch/radius_major.png"
+                    label="Major radius"
                     tooltip="Set major radius"
                     default="computed"
                     accept_expressions="0"
                     obligatory="0"
                     enable_value="enable_by_preferences">
-          <validator id="GeomValidators_Positive"/>
         </labelvalue>
-        <labelvalue id="ellipse_minor_radius"
-                    icon="icons/Sketch/radius.png"
-                    label="Minor radius:"
+        <labelvalue id="minor_radius"
+                    icon="icons/Sketch/radius_minor.png"
+                    label="Minor radius"
                     tooltip="Set minor radius"
                     default="computed"
                     accept_expressions="0"
                     obligatory="0"
                     enable_value="enable_by_preferences">
-          <validator id="GeomValidators_Positive"/>
         </labelvalue>
         <boolvalue id="Auxiliary"
                    tooltip="Construction element"
                    label="Auxiliary"
                    default="false"
-                   obligatory="0"/>
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+        <validator id="GeomValidators_Different" parameters="center,major_axis_point"/>
+        <validator id="SketchPlugin_DifferentPointReference" parameters="center_ref,major_axis_point_ref"/>
+        <validator id="GeomValidators_Different" parameters="start_point,end_point"/>
+        <validator id="SketchPlugin_DifferentPointReference" parameters="start_point_ref,end_point_ref"/>
+      </feature>
+    </group>
+
+    <group id="Parametric curves">
+      <!-- SketchBSpline is a hidden feature. It is created inside SketchMacroBSpline. -->
+      <feature id="SketchBSpline"
+               title="B-spline"
+               tooltip="Create B-spline curve"
+               icon="icons/Sketch/bspline.png"
+               helpfile="bsplineFeature.html"
+               internal="1">
+        <bspline-panel id="poles"
+                       weights="weights"
+                       title="Poles and weights"
+                       tooltip="B-spline poles and weights"
+                       enable_value="enable_by_preferences">
+          <validator id="SketchPlugin_BSplineValidator"/>
+        </bspline-panel>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   default="false"
+                   tooltip="Construction element"
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+      </feature>
+
+      <!-- SketchBSplinePeriodic is a hidden feature. It is created inside SketchMacroBSplinePeriodic. -->
+      <feature id="SketchBSplinePeriodic"
+               title="Periodic B-spline"
+               tooltip="Create periodic B-spline curve"
+               icon="icons/Sketch/bspline_p.png"
+               helpfile="bsplineFeature.html"
+               internal="1">
+        <bspline-panel id="poles"
+                       weights="weights"
+                       title="Poles and weights"
+                       tooltip="B-spline poles and weights"
+                       enable_value="enable_by_preferences">
+          <validator id="SketchPlugin_BSplineValidator"/>
+        </bspline-panel>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   default="false"
+                   tooltip="Construction element"
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+      </feature>
+
+      <!-- SketchMacroBSpline -->
+      <feature id="SketchMacroBSpline"
+               title="B-spline"
+               tooltip="Create B-spline curve"
+               icon="icons/Sketch/bspline.png"
+               helpfile="bsplineFeature.html">
+        <sketch-bspline_selector id="poles"
+                                 weights="weights"
+                                 reference_attribute="poles_ref"
+                                 title="Poles"
+                                 tooltip="B-spline poles"
+                                 enable_value="enable_by_preferences">
+          <validator id="SketchPlugin_BSplineValidator"/>
+        </sketch-bspline_selector>
+        <boolvalue id="need_control_poly"
+                   label="Create control polygon"
+                   default="true"
+                   tooltip="Specify if the control polygon should be created"/>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   default="false"
+                   tooltip="Construction element"
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+      </feature>
+
+      <!-- SketchMacroBSplinePeriodic -->
+      <feature id="SketchMacroBSplinePeriodic"
+               title="Periodic B-spline"
+               tooltip="Create periodic B-spline curve"
+               icon="icons/Sketch/bspline_p.png"
+               helpfile="bsplineFeature.html">
+        <sketch-bspline_selector id="poles"
+                                 weights="weights"
+                                 reference_attribute="poles_ref"
+                                 title="Poles"
+                                 tooltip="B-spline poles"
+                                 enable_value="enable_by_preferences">
+          <validator id="SketchPlugin_BSplineValidator"/>
+        </sketch-bspline_selector>
+        <boolvalue id="need_control_poly"
+                   label="Create control polygon"
+                   default="true"
+                   tooltip="Specify if the control polygon should be created"/>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   default="false"
+                   tooltip="Construction element"
+                   obligatory="0"
+                   change_visual_attributes="true"/>
+      </feature>
+    </group>
+
+    <group id="Segmentation">
+      <!--  SketchSplit  -->
+      <feature id="SketchSplit" title="Split"
+               tooltip="Cut selected segment arc or circle on existing coincident points"
+               icon="icons/Sketch/split.png"
+               helpfile="splitFeature.html">
+        <sketch_feature_point_selector
+            id="SelectedObject"
+            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+            label="Segment"
+            tooltip="Select segment for split"
+            shape_types="edge"
+            use_external="false">
+          <validator id="SketchPlugin_SplitValidator"/>
+        </sketch_feature_point_selector>
+        <validator id="PartSet_SplitSelection"/>
+      </feature>
+      <!--  SketchTrim  -->
+      <feature id="SketchTrim" title="Trim"
+               tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
+               icon="icons/Sketch/trim.png"
+               helpfile="trimFeature.html">
+        <sketch_feature_point_selector
+            id="SelectedObject"
+            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+            label="Segment"
+            tooltip="Select segment for trim"
+            shape_types="edge"
+            use_external="false">
+          <validator id="SketchPlugin_TrimValidator"/>
+        </sketch_feature_point_selector>
+        <validator id="PartSet_SplitSelection"/>
       </feature>
     </group>
-</excluded>
 
     <group id="Projection">
       <!-- Projected feature -->
@@ -477,7 +756,8 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
               use_sketch_plane="false">
           <validator id="SketchPlugin_ProjectionValidator"/>
         </sketch_shape_selector>
-        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"/>
+        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"
+                   change_visual_attributes="true"/>
         <validator id="PartSet_ProjectionSelection"/>
       </feature>
 
@@ -498,7 +778,8 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
               use_sketch_plane="false">
           <validator id="SketchPlugin_IntersectionValidator"/>
         </sketch_shape_selector>
-        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"/>
+        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"
+                   change_visual_attributes="true"/>
         <validator id="PartSet_IntersectionSelection"/>
       </feature>
     </group>
@@ -516,9 +797,9 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
           <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityC"/>
         </sketch_shape_selector>
         <sketch_multi_selector id="ConstraintMirrorList"
-            label="Segments:"
+            label="Segments"
             tooltip="Select list of objects to be mirrored"
-            type_choice="Edges"
+            shape_types="Edges"
             use_external="true"
             greed ="true">
           <validator id="SketchPlugin_MirrorAttr" />
@@ -533,9 +814,9 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         tooltip="Copy objects and move"
         helpfile="translationFeature.html">
         <sketch_multi_selector id="MultiTranslationList"
-            label="Segments:"
+            label="Segments"
             tooltip="Select list of objects to be translated"
-            type_choice="Edges"
+            shape_types="Edges"
             use_external="true"
             greed ="true">
           <validator id="SketchPlugin_CopyValidator" />
@@ -602,9 +883,9 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         tooltip="Copy objects and rotate"
         helpfile="rotationFeature.html">
         <sketch_multi_selector id="MultiRotationList"
-            label="Segments:"
+            label="Segments"
             tooltip="Select list of objects to be rotated"
-            type_choice="Edges"
+            shape_types="Edges"
             use_external="true"
             greed ="true">
           <validator id="SketchPlugin_CopyValidator" />
@@ -660,7 +941,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
     </group>
 
     <group id="Dimensional constraints">
-    <!--  SketchConstraintDistance  -->
+      <!--  SketchConstraintDistance  -->
       <feature
         id="SketchConstraintDistance"
         title="Distance"
@@ -676,7 +957,6 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
-          <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
         <sketch_shape_selector
           id="ConstraintEntityB"
@@ -687,12 +967,11 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
           <validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
           <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
-          <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityA"/>
         </sketch_shape_selector>
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
 
         <doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
-          <validator id="GeomValidators_Positive"/>
+          <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
         </doublevalue_editor>
 
         <module_choice id="LocationType"
@@ -738,7 +1017,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
 
         <doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
-          <validator id="GeomValidators_Positive"/>
+          <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
         </doublevalue_editor>
 
         <module_choice id="LocationType"
@@ -783,7 +1062,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
 
         <doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
-          <validator id="GeomValidators_Positive"/>
+          <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
         </doublevalue_editor>
 
         <module_choice id="LocationType"
@@ -826,16 +1105,28 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
       <!--  SketchConstraintAngle  -->
       <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png"
                helpfile="angleFeature.html">
-        <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select a line" shape_types="edge" >
+        <sketch_feature_point_selector
+            id="ConstraintEntityA"
+            selection_attributes="ConstraintEntityA SelectedPointA"
+            label="Line 1"
+            tooltip="Select a line"
+            shape_types="edge"
+            use_external="true">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
-        </sketch_shape_selector>
-        <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select a line" shape_types="edge" >
+        </sketch_feature_point_selector>
+        <sketch_feature_point_selector
+            id="ConstraintEntityB"
+            selection_attributes="ConstraintEntityB SelectedPointB"
+            label="Line 2"
+            tooltip="Select a line"
+            shape_types="edge"
+            use_external="true">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
-        </sketch_shape_selector>
+        </sketch_feature_point_selector>
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
         <doublevalue_editor label="Value" tooltip="Angle" id="AngleValue" default="computed" min="0" max="360" />
         <validator id="PartSet_AngleSelection"/>
@@ -844,7 +1135,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
           buttons_dir="horizontal"
           label="Angle type"
           tooltip="Type of angle"
-          string_list="Direct Complementary Additional"
+          string_list="Direct Supplementary Additional"
           icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
           default="0"
           />
@@ -917,9 +1208,9 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
       <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png"
                helpfile="rigidFeature.html">
         <sketch_shape_selector id="ConstraintEntityA" label="Object"
-                        tooltip="Select point, line end point, line, center of circle or arc."
+                        tooltip="Select point, curve or its boundary point."
                         shape_types="edge vertex">
-          <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
+          <validator id="GeomValidators_ShapeType" parameters="vertex,edge"/>
           <validator id="SketchPlugin_NotFixed"/>
         </sketch_shape_selector>
         <validator id="PartSet_RigidSelection"/>
@@ -944,31 +1235,33 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         <validator id="PartSet_ParallelSelection"/>
       </feature>
 
-    <!--  SketchConstraintPerpendicular  -->
+      <!--  SketchConstraintPerpendicular  -->
       <feature id="SketchConstraintPerpendicular" title="Perpendicular"
-               tooltip="Create constraint defining two perpendicular lines"
+               tooltip="Create constraint defining two orthogonal objects"
                icon="icons/Sketch/perpendicular.png"
                helpfile="perpendicularFeature.html">
         <sketch_shape_selector id="ConstraintEntityA"
-            label="First line" tooltip="Select a line"
+            label="First object" tooltip="Select line or arc"
             shape_types="edge">
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
-            <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_PerpendicularAttr" parameters="ConstraintEntityB"/>
+          <validator id="GeomValidators_ShapeType" parameters="edge"/>
         </sketch_shape_selector>
 
         <sketch_shape_selector id="ConstraintEntityB"
-            label="Second line" tooltip="Select a line"
+            label="Second object" tooltip="Select line or arc"
             shape_types="edge">
-            <validator id="PartSet_DifferentObjects"/>
+          <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
-            <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_PerpendicularAttr" parameters="ConstraintEntityA"/>
+          <validator id="GeomValidators_ShapeType" parameters="edge"/>
         </sketch_shape_selector>
         <validator id="PartSet_PerpendicularSelection"/>
       </feature>
 
       <!--  SketchConstraintTangent  -->
-      <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon="icons/Sketch/tangent.png"
+      <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two segments with common coincident point" icon="icons/Sketch/tangent.png"
                helpfile="tangentFeature.html">
         <sketch_shape_selector id="ConstraintEntityA"
             label="First object" tooltip="Select line or arc" shape_types="edge">
@@ -998,6 +1291,20 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </sketch_shape_selector>
         <validator id="PartSet_CoincidentSelection"/>
       </feature>
+      <!--  SketchConstraintCoincidenceInternal  -->
+      <feature id="SketchConstraintCoincidenceInternal" title="Internal Coincidence" tooltip="Internal coincidence" icon="icons/Sketch/coincedence.png"
+               helpfile="coincedenceFeature.html" internal="1">
+        <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex">
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+        </sketch_shape_selector>
+        <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex">
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+          <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
+        </sketch_shape_selector>
+        <validator id="PartSet_CoincidentSelection"/>
+      </feature>
 
       <!--  SketchConstraintMiddle  -->
       <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line"
@@ -1018,17 +1325,18 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
 
       <!--  SketchConstraintEqual  -->
       <feature id="SketchConstraintEqual" title="Equal"
-        tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
+        tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radiuses of two arcs or two circles or arc and circle"
         icon="icons/Sketch/equal.png"
                helpfile="equalFeature.html">
         <sketch_shape_selector id="ConstraintEntityA"
-            label="First object" tooltip="Select line, circle or arc" shape_types="edge">
+            label="First object" tooltip="Select edge" shape_types="edge">
+          <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityB"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
 
         <sketch_shape_selector id="ConstraintEntityB"
-            label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
+            label="Second object" tooltip="Select edge" shape_types="edge">
           <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
@@ -1036,7 +1344,7 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         <validator id="PartSet_EqualSelection"/>
       </feature>
 
-    <!--  SketchConstraintCollinear  -->
+      <!--  SketchConstraintCollinear  -->
       <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines"
                icon="icons/Sketch/collinear.png"
                helpfile="collinearFeature.html">
@@ -1053,23 +1361,6 @@ email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com
         </sketch_shape_selector>
         <validator id="PartSet_CollinearSelection"/>
       </feature>
-
-    </group>
-
-  </workbench>
-  <workbench id="Macros" document="Part">
-    <group id="Samples">
-
-      <feature id="SketchDrawer" title="Sketch drawer" tooltip="Creates sketch using elements of selected shape belonging to selected plane"
-            icon="icons/Sketch/drawer.png"
-            helpfile="sketchDrawer.html">
-        <shape_selector id="base_shape" label="Shape:" tooltip="Select a shape for extraction to sketch."
-            shape_types="objects" concealment="false"/>
-        <shape_selector id="plane" label="Plane:" tooltip="Select plane for sketch" shape_types="face">
-          <validator id="GeomValidators_Face" parameters="plane"/>
-        </shape_selector>
-        <boolvalue id="add_dimensions" label="Create dimensions" default="true" tooltip="To add dimensions into created sketch" obligatory="0"/>
-      </feature>
     </group>
   </workbench>
 </plugin>