X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2Fplugin-Sketch.xml;h=138c0a60b2d701aeaa2987151a7a4f58e1d2ad42;hb=4742033c072911d8565ca335349c7b9c64a210ee;hp=20c68b4d33bd4702c4a1264d6afca0ea936e4b5e;hpb=42a0eadea64d278ba043680cfee74fa2f1c0f688;p=modules%2Fshaper.git

diff --git a/src/SketchPlugin/plugin-Sketch.xml b/src/SketchPlugin/plugin-Sketch.xml
index 20c68b4d3..138c0a60b 100644
--- a/src/SketchPlugin/plugin-Sketch.xml
+++ b/src/SketchPlugin/plugin-Sketch.xml
@@ -1,11 +1,42 @@
-<!-- Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
+<!--
+Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2.1 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with this library; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+See http:##www.salome-platform.org/ or
+email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+-->
 
 <plugin>
   <workbench id="Sketch">
-    <group id="Geometry">
+    <group id="Linear geometry">
       <feature
         id="Sketch"
-        nested="SketchPoint SketchIntersectionPoint SketchLine SketchCircle SketchArc SketchRectangle SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintParallel SketchConstraintPerpendicular SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical SketchConstraintEqual SketchConstraintTangent SketchConstraintFillet SketchConstraintCoincidence SketchConstraintMirror SketchConstraintAngle SketchMultiRotation SketchMultiTranslation SketchConstraintCollinear SketchConstraintMiddle"
+        nested="SketchPoint SketchIntersectionPoint SketchLine
+                SketchCircle SketchMacroCircle SketchArc SketchMacroArc
+                SketchRectangle
+                SketchProjection
+                SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintDistanceHorizontal SketchConstraintDistanceVertical
+                SketchConstraintParallel SketchConstraintPerpendicular
+                SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical
+                SketchConstraintEqual SketchConstraintTangent
+                SketchFillet SketchSplit SketchTrim
+                SketchConstraintCoincidence
+                SketchConstraintMirror SketchConstraintAngle
+                SketchMultiRotation SketchMultiTranslation
+                SketchConstraintCollinear SketchConstraintMiddle"
         when_nested="accept abort"
         title="Sketch"
         tooltip="Create sketch"
@@ -13,148 +44,484 @@
         <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
           <validator id="GeomValidators_Face" parameters="plane"/>
         </sketch-start-label>
-        <error_label id="SolverError"/>
+        <label id="SolverDOF"/>
+        <label id="SolverError" styleSheet="color : red; font : bold"/>
         <validator id="SketchPlugin_SolverErrorValidator"/>
       </feature>
 
       <!-- SketchPoint -->
       <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png">
-        <sketch-2dpoint_selector id="PointCoordindates" accept_expressions="0" title="Point" tooltip="Point coordinates"/>
+        <sketch-2dpoint_selector id="PointCoordinates" accept_expressions="0" title="Point" tooltip="Point coordinates"
+                                 enable_value="enable_by_preferences"/>
         <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
       </feature>
-      
+
       <!-- SketchLine -->
       <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png">
-        <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates" previous_feature_param="EndPoint"/>
-        <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"/>
+        <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"
+                                 enable_value="enable_by_preferences"/>
+        <labelvalue id="LineLength" accept_expressions="0" label="Length:" default="computed" icon="icons/Sketch/distance_value.png"
+                     tooltip="Line length" obligatory="0" enable_value="false"/>
         <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
         <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
       </feature>
-
-      <!-- SketchCircle -->
-      <feature 
-        id="SketchCircle"
-        title="Circle"
-        tooltip="Create circle"
-        icon="icons/Sketch/circle.png">
-        <toolbox id="CircleType">
-          <box id="CenterRadius" title="Center and radius" icon="icons/Sketch/circle_pt_rad_32x32.png">
-            <sketch-2dpoint_selector id="CircleCenter" accept_expressions="0" title="Center" tooltip="Center coordinates"/>
-            <point2ddistance id="CircleRadius" accept_expressions="0" first_point="CircleCenter" label="Radius:" min="0" step="1.0" default="0" icon="icons/Sketch/radius.png" tooltip="Set radius">
-              <validator id="GeomValidators_Positive"/>
-            </point2ddistance>
+    </group>
+    <group id="Circular geometry">
+      <!-- SketchCircle is a hidden feature. It is created inside SketchMacroCircle. -->
+      <feature id="SketchCircle"
+               title="Circle"
+               tooltip="Create circle"
+               icon="icons/Sketch/circle.png"
+               internal="1">
+        <sketch-2dpoint_selector id="circle_center"
+                                 title="Center"
+                                 tooltip="Center coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <labelvalue id="circle_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Radius:"
+                    tooltip="Set radius"
+                    default="computed"
+                    accept_expressions="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+      </feature>
+      <!-- SketchMacroCircle -->
+      <feature id="SketchMacroCircle"
+               icon="icons/Sketch/circle.png"
+               title="Circle"
+               tooltip="Create circle">
+        <toolbox id="circle_type" modified_in_edit="edit_circle_type">
+          <box id="circle_type_by_center_and_passed_points"
+               icon="icons/Sketch/circle_pt_rad_32x32.png"
+               title="Center and passed points">
+            <sketch-2dpoint_selector id="center_point"
+                                     reference_attribute="center_point_ref"
+                                     title="Center point"
+                                     tooltip="Center point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="passed_point"
+                                     reference_attribute="passed_point_ref"
+                                     title="Passed point"
+                                     tooltip="Passed point coordinates"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_CirclePassedPointValidator"/>
+            </sketch-2dpoint_selector>
+            <validator id="GeomValidators_Different" parameters="center_point_ref,passed_point_ref"/>
           </box>
-          <box id="ThreePoints" title="Three points" icon="icons/Sketch/circle_3pt_32x32.png">
-            <sketch-2dpoint_selector id="FirstPoint" accept_expressions="0" title="First point" tooltip="First point"/>
-            <sketch-2dpoint_selector id="SecondPoint" accept_expressions="0" title="Second point" tooltip="Second point"/>
-            <sketch-2dpoint_selector id="ThirdPoint" accept_expressions="0" title="Third point" tooltip="Third point"/>
+          <box id="circle_type_by_three_points"
+               icon="icons/Sketch/circle_3pt_32x32.png"
+               title="Three points">
+            <sketch-2dpoint_selector id="first_point"
+                                     reference_attribute="first_point_ref"
+                                     title="First point"
+                                     tooltip="First point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="second_point"
+                                     reference_attribute="second_point_ref"
+                                     title="Second point"
+                                     tooltip="Second point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_DifferentReference" parameters="first_point_ref,second_point_ref"/>
+            </sketch-2dpoint_selector>
+            <sketch-2dpoint_selector id="third_point"
+                                     reference_attribute="third_point_ref"
+                                     title="Third point"
+                                     tooltip="Third point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_DifferentReference" parameters="first_point_ref,second_point_ref,third_point_ref"/>
+              <validator id="SketchPlugin_ThirdPointValidator" parameters="third_point_ref"/>
+            </sketch-2dpoint_selector>
+            <validator id="GeomValidators_Different" parameters="first_point_ref,second_point_ref,third_point_ref"/>
           </box>
         </toolbox>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <labelvalue id="circle_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Radius:"
+                    tooltip="Set radius"
+                    default="computed"
+                    accept_expressions="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+          <validator id="GeomValidators_Positive"/>
+        </labelvalue>
+        <boolvalue id="Auxiliary"
+                   tooltip="Construction element"
+                   label="Auxiliary"
+                   default="false"
+                   obligatory="0"/>
       </feature>
 
       <!-- SketchArc -->
+      <feature id="SketchArc"
+               icon="icons/Sketch/arc.png"
+               title="Arc"
+               tooltip="Create arc"
+               internal="1">
+        <sketch-2dpoint_selector id="center_point"
+                                 title="Center"
+                                 tooltip="Center of a circle"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="start_point"
+                                 title="Start point"
+                                 tooltip="Start point"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="end_point"
+                                 title="End point"
+                                 tooltip="End point"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <validator id="GeomValidators_Different" parameters="center_point,start_point,end_point"/>
+        <labelvalue id="radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Radius:"
+                    tooltip="Set radius"
+                    accept_expressions="0"
+                    min="0"
+                    default="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <labelvalue id="angle"
+                    icon="icons/Sketch/angle.png"
+                    label="Angle:"
+                    tooltip="Set angle"
+                    default="0"
+                    use_reset="false"
+                    obligatory="0"
+                    enable_value="enable_by_preferences"/>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   tooltip="Construction element"
+                   default="false"
+                   obligatory="0"/>
+      </feature>
+
+      <!-- SketchMacroArc -->
       <feature
-        id="SketchArc"
+        id="SketchMacroArc"
         title="Arc"
         tooltip="Create arc"
         icon="icons/Sketch/arc.png">
-        <toolbox id="ArcType">
-          <box id="CenterStartEnd" title="Center and two points" icon="icons/Sketch/arc_base_32x32.png">
-            <sketch-2dpoint_selector id="ArcCenter" accept_expressions="0" title="Center" tooltip="Center of a circle"/>
-            <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
-            <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
-            <validator id="GeomValidators_Different" parameters="ArcCenter,ArcStartPoint,ArcEndPoint"/>
+        <toolbox id="arc_type" modified_in_edit="edit_arc_type">
+          <box id="by_center_and_points"
+               icon="icons/Sketch/arc_base_32x32.png"
+               title="Center and two points">
+            <sketch-2dpoint_selector id="center_point"
+                                     reference_attribute="center_point_ref"
+                                     title="Center point"
+                                     tooltip="Center of a circle"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences" />
+            <sketch-2dpoint_selector id="start_point_1"
+                                     reference_attribute="start_point_ref"
+                                     title="Start point"
+                                     tooltip="Start point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="end_point_1"
+                                     reference_attribute="end_point_ref"
+                                     title="End point"
+                                     tooltip="End point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
+              <validator id="SketchPlugin_ArcEndPointIntersectionValidator" parameters="end_point_ref"/>
+            </sketch-2dpoint_selector>
+            <validator id="GeomValidators_Different" parameters="center_point,start_point_1,end_point_1"/>
           </box>
-          <box id="ThreePoints" title="Three points on arc" icon="icons/Sketch/arc_3pt_32x32.png">
-            <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
-            <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
-            <sketch-2dpoint_selector id="ArcPassedPoint" accept_expressions="0" title="Passed point" tooltip="Passed point"/>
-            <validator id="GeomValidators_Different" parameters="ArcStartPoint,ArcEndPoint,ArcPassedPoint"/>
+          <box id="by_three_points"
+               icon="icons/Sketch/arc_3pt_32x32.png"
+               title="Three points on arc">
+            <sketch-2dpoint_selector id="start_point_2"
+                                     reference_attribute="start_point_ref"
+                                     title="Start point"
+                                     tooltip="Start point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences"/>
+            <sketch-2dpoint_selector id="end_point_2"
+                                     reference_attribute="end_point_ref"
+                                     title="End point"
+                                     tooltip="End point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="GeomValidators_Different" parameters="start_point_2,end_point_2"/>
+              <validator id="SketchPlugin_DifferentPointReference" parameters="start_point_ref,end_point_ref"/>
+            </sketch-2dpoint_selector>
+            <sketch-2dpoint_selector id="passed_point"
+                                     reference_attribute="passed_point_ref"
+                                     title="Passed point"
+                                     tooltip="Passed point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_DifferentReference" parameters="start_point_ref,end_point_ref,passed_point_ref"/>
+              <validator id="SketchPlugin_ThirdPointValidator" parameters="passed_point_ref"/>
+            </sketch-2dpoint_selector>
+            <validator id="GeomValidators_Different" parameters="start_point_2,end_point_2,passed_point"/>
           </box>
-          <box id="Tangent" title="Tangent with edge" icon="icons/Sketch/arc_tang_32x32.png">
-            <sketch_shape_selector id="ArcTangentPoint" label="Start point" tooltip="Select point on line" shape_types="vertex">
-              <validator id="SketchPlugin_ArcTangentPoint" parameters="" />
+          <box id="by_tangent_edge"
+               icon="icons/Sketch/arc_tang_32x32.png"
+               title="Tangent with edge">
+            <sketch_shape_selector id="tangent_point"
+                                   label="Tangent point"
+                                   tooltip="Select point on line"
+                                   shape_types="vertex">
+              <validator id="SketchPlugin_ArcTangentPoint"/>
             </sketch_shape_selector>
-            <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
+            <sketch-2dpoint_selector id="end_point_3"
+                                     reference_attribute="end_point_ref"
+                                     title="End point"
+                                     tooltip="End point"
+                                     accept_expressions="0"
+                                     enable_value="enable_by_preferences">
+              <validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
+            </sketch-2dpoint_selector>
           </box>
         </toolbox>
-        <doublevalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon="icons/Sketch/radius.png" tooltip="Set radius" obligatory="0">
-          <validator id="GeomValidators_Positive"/>
-        </doublevalue>
-        <doublevalue id="ArcAngle" label="Angle:" icon="icons/Sketch/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"/>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+        <labelvalue id="radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Radius:"
+                    tooltip="Set radius"
+                    accept_expressions="0"
+                    min="0"
+                    default="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <labelvalue id="angle"
+                    icon="icons/Sketch/angle.png"
+                    label="Angle:"
+                    tooltip="Set angle"
+                    default="0"
+                    use_reset="false"
+                    obligatory="0"
+                    enable_value="enable_by_preferences"/>
+        <boolvalue id="Auxiliary"
+                   label="Auxiliary"
+                   tooltip="Construction element"
+                   default="false"
+                   obligatory="0"/>
       </feature>
 
-      <!--  SketchConstraintFillet  -->
-      <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon="icons/Sketch/fillet.png">
-        <!--<sketch_shape_selector id="ConstraintEntityA"
-            label="Point" tooltip="Select point for fillet (should be shared by two entities only)" shape_types="vertex">
-          <validator id="SketchPlugin_FilletVertexValidator"/>
-        </sketch_shape_selector>-->
-        <sketch_multi_selector id="ConstraintEntityA"
-            label="Points:"
-            tooltip="Select points for fillets"
-            type_choice="Vertices"
-            greed ="true">
+      <!--  SketchFillet  -->
+      <feature id="SketchFillet"
+               title="Fillet"
+               tooltip="Create constraint defining fillet between two objects"
+               icon="icons/Sketch/fillet.png">
+        <sketch_shape_selector id="fillet_point"
+                               label="Point"
+                               tooltip="Select point for fillet (should be shared by two entities only)"
+                               shape_types="vertex">
           <validator id="SketchPlugin_FilletVertexValidator"/>
-        </sketch_multi_selector>
-        <doublevalue label="Radius" tooltip="Fillet arc radius" id="ConstraintValue" accept_expressions="0" min="0" use_reset="false">
+        </sketch_shape_selector>
+        <!--<validator id="PartSet_FilletSelection"/>-->
+      </feature>
+      <!--  SketchSplit  -->
+      <feature id="SketchSplit" title="Split"
+               tooltip="Cut selected segment arc or circle on existing coincident points"
+               icon="icons/Sketch/split.png">
+        <sketch_feature_point_selector
+            id="SelectedObject"
+            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+            label="Segment"
+            tooltip="Select segment for split"
+            shape_types="edge"
+            use_external="false">
+          <validator id="SketchPlugin_SplitValidator"/>
+        </sketch_feature_point_selector>
+        <validator id="PartSet_SplitSelection"/>
+      </feature>
+      <!--  SketchTrim  -->
+      <feature id="SketchTrim" title="Trim"
+               tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
+               icon="icons/Sketch/trim.png">
+        <sketch_feature_point_selector
+            id="SelectedObject"
+            selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+            label="Segment"
+            tooltip="Select segment for trim"
+            shape_types="edge"
+            use_external="false">
+          <validator id="SketchPlugin_TrimValidator"/>
+        </sketch_feature_point_selector>
+        <validator id="PartSet_SplitSelection"/>
+      </feature>
+    </group>
+
+<excluded>
+    <group id="Elliptic geometry">
+      <!-- SketchEllipse is a hidden feature. It is created inside SketchMacroEllipse. -->
+      <feature id="SketchEllipse"
+               title="Ellipse"
+               tooltip="Create ellipse"
+               icon="icons/Sketch/ellipse.png"
+               internal="1">
+        <sketch-2dpoint_selector id="ellipse_center"
+                                 title="Center"
+                                 tooltip="Center coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="ellipse_focus"
+                                 title="Focus"
+                                 tooltip="Focus coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <labelvalue id="ellipse_major_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Major radius:"
+                    tooltip="Set major radius"
+                    default="computed"
+                    accept_expressions="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <labelvalue id="ellipse_minor_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Minor radius:"
+                    tooltip="Set minor radius"
+                    default="computed"
+                    accept_expressions="0"
+                    enable_value="enable_by_preferences">
+        </labelvalue>
+        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+      </feature>
+      <!-- SketchMacroEllipse -->
+      <feature id="SketchMacroEllipse"
+               icon="icons/Sketch/ellipse.png"
+               title="Ellipse"
+               tooltip="Create ellipse">
+        <sketch-2dpoint_selector id="center_point"
+                                 reference_attribute="center_point_ref"
+                                 title="Center point"
+                                 tooltip="Center point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="major_axis_point"
+                                 reference_attribute="major_axis_point_ref"
+                                 title="Major axis point"
+                                 tooltip="Major axis point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences"/>
+        <sketch-2dpoint_selector id="passed_point"
+                                 reference_attribute="passed_point_ref"
+                                 title="Passed point"
+                                 tooltip="Passed point coordinates"
+                                 accept_expressions="0"
+                                 enable_value="enable_by_preferences">
+<!--          <validator id="SketchPlugin_CirclePassedPointValidator"/> -->
+        </sketch-2dpoint_selector>
+<!--        <validator id="GeomValidators_Different" parameters="center_point_ref,passed_point_ref"/> -->
+        <labelvalue id="ellipse_major_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Major radius:"
+                    tooltip="Set major radius"
+                    default="computed"
+                    accept_expressions="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
+          <validator id="GeomValidators_Positive"/>
+        </labelvalue>
+        <labelvalue id="ellipse_minor_radius"
+                    icon="icons/Sketch/radius.png"
+                    label="Minor radius:"
+                    tooltip="Set minor radius"
+                    default="computed"
+                    accept_expressions="0"
+                    obligatory="0"
+                    enable_value="enable_by_preferences">
           <validator id="GeomValidators_Positive"/>
-        </doublevalue>
-        <validator id="PartSet_FilletSelection"/>
+        </labelvalue>
+        <boolvalue id="Auxiliary"
+                   tooltip="Construction element"
+                   label="Auxiliary"
+                   default="false"
+                   obligatory="0"/>
       </feature>
     </group>
+</excluded>
+
+    <group id="Projection">
+      <!-- Projected feature -->
+      <feature
+        id="SketchProjection"
+        title="Projection"
+        tooltip="Project feature onto sketch plane"
+        icon="icons/Sketch/projection.png">
+        <sketch_shape_selector
+              id="ExternalFeature"
+              label="Object"
+              tooltip="Select external edge or vertex."
+              shape_types="edge vertex"
+              use_external="true"
+              can_create_external="false"
+              use_sketch_plane="false">
+          <validator id="SketchPlugin_ProjectionValidator"/>
+        </sketch_shape_selector>
+        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"/>
+        <validator id="PartSet_ProjectionSelection"/>
+      </feature>
 
-    <!--<group id="Projection"> -->
       <!-- Intersection Point -->
-      <!-- feature
+      <feature
         id="SketchIntersectionPoint"
-        title="Intersection Point"
-        tooltip="Create intersection point"
-        icon="icons/Sketch/intersection_point.png">
+        title="Intersection"
+        tooltip="Intersect edge with sketch plane"
+        icon="icons/Sketch/intersection.png">
         <sketch_shape_selector
-              id="ExternalLine"
-              label="Edge"
-              tooltip="Select external line."
+              id="ExternalFeature"
+              label="Object"
+              tooltip="Select external edge."
               shape_types="edge"
-              use_external="false"
+              use_external="true"
+              can_create_external="false"
               use_sketch_plane="false">
-          <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="SketchPlugin_IntersectionValidator"/>
         </sketch_shape_selector>
-        <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
-      </feature -->
-    <!--</group>-->
+        <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"/>
+        <validator id="PartSet_IntersectionSelection"/>
+      </feature>
+    </group>
 
     <group id="Replication">
       <!--  SketchConstraintMirror  -->
       <feature
         id="SketchConstraintMirror"
-        title="Mirror" icon="icons/Sketch/mirror.png"
+        title="Mirror copy" icon="icons/Sketch/mirror.png"
         tooltip="Create constraint, mirroring group of objects">
         <sketch_shape_selector id="ConstraintEntityA"
             label="Mirror line" tooltip="Select mirror line" shape_types="edge">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityC"/>
         </sketch_shape_selector>
         <sketch_multi_selector id="ConstraintMirrorList"
             label="Segments:"
-            tooltip="Select list of mirroring objects"
+            tooltip="Select list of objects to be mirrored"
             type_choice="Edges"
             use_external="true"
             greed ="true">
           <validator id="SketchPlugin_MirrorAttr" />
         </sketch_multi_selector>
+        <validator id="PartSet_MultyTranslationSelection" />
       </feature>
 
       <!--  SketchMultiTranslation  -->
       <feature
         id="SketchMultiTranslation"
-        title="Translation" icon="icons/Sketch/translate.png"
-        tooltip="Multiple translation">
+        title="Linear copy" icon="icons/Sketch/translate.png"
+        tooltip="Copy objects and move">
         <sketch_multi_selector id="MultiTranslationList"
             label="Segments:"
-            tooltip="Select list of translating objects"
+            tooltip="Select list of objects to be translated"
             type_choice="Edges"
             use_external="true"
             greed ="true">
@@ -170,6 +537,7 @@
                     shape_types="vertex">
                 <validator id="PartSet_DifferentObjects"/>
                 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+                <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
               </sketch_shape_selector>
               <sketch_shape_selector
                     id="MultiTranslationEndPoint"
@@ -178,6 +546,7 @@
                     shape_types="vertex">
                 <validator id="PartSet_DifferentObjects"/>
                 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+                <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
               </sketch_shape_selector>
             </groupbox>
           </box>
@@ -190,6 +559,7 @@
                     shape_types="vertex">
                 <validator id="PartSet_DifferentObjects"/>
                 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+                <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
               </sketch_shape_selector>
               <sketch_shape_selector
                     id="MultiTranslationEndPoint"
@@ -198,6 +568,7 @@
                     shape_types="vertex">
                 <validator id="PartSet_DifferentObjects"/>
                 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+                <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
               </sketch_shape_selector>
             </groupbox>
           </box>
@@ -206,18 +577,19 @@
             label="Total number of objects"
             tooltip="Total number of objects"
             default="2" min="2" use_reset="false">
-          <validator id="GeomValidators_Positive"/>
+          <validator id="GeomValidators_Positive" parameters="1"/>
         </integervalue>
+        <validator id="PartSet_MultyTranslationSelection" />
       </feature>
 
       <!--  SketchMultiRotation  -->
       <feature
         id="SketchMultiRotation"
-        title="Rotation" icon="icons/Sketch/rotate.png"
-        tooltip="Multiple rotation">
+        title="Angular copy" icon="icons/Sketch/rotate.png"
+        tooltip="Copy objects and rotate">
         <sketch_multi_selector id="MultiRotationList"
             label="Segments:"
-            tooltip="Select list of rotating objects"
+            tooltip="Select list of objects to be rotated"
             type_choice="Edges"
             use_external="true"
             greed ="true">
@@ -229,29 +601,47 @@
               tooltip="Center of rotation"
               shape_types="vertex">
           <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+          <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
         <toolbox id="AngleType">
-          <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
+          <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
             <doublevalue id="MultiRotationAngle"
                          label="Angle"
                          icon="icons/Sketch/angle.png"
                          tooltip="Rotation angle"
-                         default="90" use_reset="false"/>
+                         default="270" min="0" max="360"
+                         use_reset="false">
+              <validator id="SketchPlugin_MultiRotationAngleValidator" />
+            </doublevalue>
+            <boolvalue id="MultiRotationReversed"
+                       label="Reversed"
+                       tooltip="Reverse angular copy"
+                       default="false"
+                       obligatory="0"/>
           </box>
-          <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
+          <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
             <doublevalue id="MultiRotationAngle"
                          label="Angle"
                          icon="icons/Sketch/angle.png"
                          tooltip="Rotation angle"
-                         default="90" use_reset="false"/>
+                         default="270" min="0" max="360"
+                         use_reset="false">
+              <validator id="SketchPlugin_MultiRotationAngleValidator" />
+            </doublevalue>
+            <boolvalue id="MultiRotationReversed"
+                       label="Reversed"
+                       tooltip="Reverse angular copy"
+                       default="false"
+                       obligatory="0"/>
           </box>
         </toolbox>
         <integervalue id="MultiRotationObjects"
             label="Total number of objects"
             tooltip="Total number of objects"
-            default="2" min="2" use_reset="false">
-          <validator id="GeomValidators_Positive"/>
+            default="4" min="2" use_reset="false">
+          <validator id="GeomValidators_Positive" parameters="1"/>
         </integervalue>
+        <validator id="PartSet_MultyTranslationSelection" />
       </feature>
     </group>
 
@@ -271,47 +661,158 @@
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
+          <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
-        <sketch_shape_selector 
-          id="ConstraintEntityB" 
-          label="Second object" 
-          tooltip="Select point, line end point, line, center of circle or arc." 
+        <sketch_shape_selector
+          id="ConstraintEntityB"
+          label="Second object"
+          tooltip="Select point, line end point, line, center of circle or arc."
           shape_types="edge vertex">
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
           <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
+          <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityA"/>
         </sketch_shape_selector>
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
-        
+
         <doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
           <validator id="GeomValidators_Positive"/>
         </doublevalue_editor>
-        
+
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
+
+        <boolvalue id="SignedDistance" label="Keep orientation" default="true" tooltip="Keep distance orientation" obligatory="0"/>
         <validator id="PartSet_DistanceSelection"/>
       </feature>
-      
-    <!--  SketchConstraintLength  -->      
+
+      <!--  SketchConstraintDistanceHorizontal  -->
+      <feature
+        id="SketchConstraintDistanceHorizontal"
+        title="Horizontal Distance"
+        tooltip="Set horizontal distance between two points"
+        icon="icons/Sketch/distance_h.png">
+        <label title="Select points for distance definition."/>
+        <sketch_shape_selector
+              id="ConstraintEntityA"
+              label="First point"
+              tooltip="Select point."
+              shape_types="vertex">
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+        </sketch_shape_selector>
+        <sketch_shape_selector
+          id="ConstraintEntityB"
+          label="Second point"
+          tooltip="Select point."
+          shape_types="vertex">
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+          <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+        </sketch_shape_selector>
+        <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
+
+        <doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
+          <validator id="GeomValidators_Positive"/>
+        </doublevalue_editor>
+
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
+
+        <validator id="PartSet_DistanceSelection"/>
+      </feature>
+
+      <!--  SketchConstraintDistanceVertical  -->
+      <feature
+        id="SketchConstraintDistanceVertical"
+        title="Vertical Distance"
+        tooltip="Set vertical distance between two points"
+        icon="icons/Sketch/distance_v.png">
+        <label title="Select points for distance definition."/>
+        <sketch_shape_selector
+              id="ConstraintEntityA"
+              label="First point"
+              tooltip="Select point."
+              shape_types="vertex">
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+        </sketch_shape_selector>
+        <sketch_shape_selector
+          id="ConstraintEntityB"
+          label="Second point"
+          tooltip="Select point."
+          shape_types="vertex">
+          <validator id="PartSet_DifferentObjects"/>
+          <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+          <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+        </sketch_shape_selector>
+        <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt"  default="computed" internal="1" obligatory="0"/>
+
+        <doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
+          <validator id="GeomValidators_Positive"/>
+        </doublevalue_editor>
+
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
+
+        <validator id="PartSet_DistanceSelection"/>
+      </feature>
+
+      <!--  SketchConstraintLength  -->
       <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png">
         <label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
-        <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select an line" shape_types="edge" >
+        <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select a line" shape_types="edge" >
           <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_SketchFeatureValidator"/>
         </shape_selector>
         <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
         <doublevalue_editor label="Value" tooltip="Length" id="ConstraintValue" default="computed">
           <validator id="GeomValidators_Positive"/>
         </doublevalue_editor>
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
         <validator id="PartSet_LengthSelection"/>
       </feature>
 
       <!--  SketchConstraintAngle  -->
       <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png">
-        <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select an line" shape_types="edge" >
+        <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select a line" shape_types="edge" >
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
-        <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select an line" shape_types="edge" >
+        <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select a line" shape_types="edge" >
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
@@ -325,9 +826,20 @@
           label="Angle type"
           tooltip="Type of angle"
           string_list="Direct Complementary Additional"
-          icons_list="icons/Sketch/angle_direct.png icons/angle_complementary.png icons/angle_backward.png"
+          icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
           default="0"
           />
+
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
+
       </feature>
 
       <!--  SketchConstraintRadius  -->
@@ -341,6 +853,17 @@
         <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed">
           <validator id="GeomValidators_Positive"/>
         </doublevalue_editor>
+
+        <module_choice id="LocationType"
+          widget_type="radiobuttons"
+          buttons_dir="horizontal"
+          label="Text location"
+          tooltip="Relative location of the text"
+          string_list="Left Automatic Right"
+          icons_list="icons/Sketch/location_left.png icons/Sketch/location_automatic.png icons/Sketch/location_right.png"
+          default="1"
+          />
+
         <validator id="PartSet_RadiusSelection"/>
       </feature>
 
@@ -353,6 +876,7 @@
         <sketch_shape_selector id="ConstraintEntityA"
             label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_HasNoConstraint" parameters="SketchConstraintHorizontal,SketchConstraintVertical"/>
         </sketch_shape_selector>
         <validator id="PartSet_HVDirSelection"/>
       </feature>
@@ -362,6 +886,7 @@
         <sketch_shape_selector id="ConstraintEntityA"
             label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
+          <validator id="SketchPlugin_HasNoConstraint" parameters="SketchConstraintHorizontal,SketchConstraintVertical"/>
         </sketch_shape_selector>
         <validator id="PartSet_HVDirSelection"/>
       </feature>
@@ -380,14 +905,14 @@
       <!--  SketchConstraintParallel  -->
       <feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines"
                icon="icons/Sketch/parallel.png">
-        <sketch_shape_selector id="ConstraintEntityA" 
+        <sketch_shape_selector id="ConstraintEntityA"
             label="First line" tooltip="Select a line" shape_types="edge">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
-        
-        <sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line" 
+
+        <sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line"
             shape_types="edge">
             <validator id="GeomValidators_ShapeType" parameters="line"/>
             <validator id="PartSet_DifferentObjects"/>
@@ -395,21 +920,21 @@
         </sketch_shape_selector>
         <validator id="PartSet_ParallelSelection"/>
       </feature>
-      
+
     <!--  SketchConstraintPerpendicular  -->
-      <feature id="SketchConstraintPerpendicular" title="Perpendicular" 
-        tooltip="Create constraint defining two perpendicular lines" 
+      <feature id="SketchConstraintPerpendicular" title="Perpendicular"
+        tooltip="Create constraint defining two perpendicular lines"
         icon="icons/Sketch/perpendicular.png">
-        <sketch_shape_selector id="ConstraintEntityA" 
-            label="First line" tooltip="Select an line" 
+        <sketch_shape_selector id="ConstraintEntityA"
+            label="First line" tooltip="Select a line"
             shape_types="edge">
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
             <validator id="GeomValidators_ShapeType" parameters="line"/>
         </sketch_shape_selector>
-        
-        <sketch_shape_selector id="ConstraintEntityB" 
-            label="Second line" tooltip="Select an line" 
+
+        <sketch_shape_selector id="ConstraintEntityB"
+            label="Second line" tooltip="Select a line"
             shape_types="edge">
             <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
@@ -467,12 +992,12 @@
       <feature id="SketchConstraintEqual" title="Equal"
         tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
         icon="icons/Sketch/equal.png">
-        <sketch_shape_selector id="ConstraintEntityA" 
+        <sketch_shape_selector id="ConstraintEntityA"
             label="First object" tooltip="Select line, circle or arc" shape_types="edge">
           <validator id="PartSet_DifferentObjects"/>
           <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
         </sketch_shape_selector>
-        
+
         <sketch_shape_selector id="ConstraintEntityB"
             label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
           <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
@@ -481,16 +1006,15 @@
         </sketch_shape_selector>
         <validator id="PartSet_EqualSelection"/>
       </feature>
-      
+
     <!--  SketchConstraintCollinear  -->
-      <!--
       <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon="icons/Sketch/collinear.png">
-        <sketch_shape_selector id="ConstraintEntityA" 
+        <sketch_shape_selector id="ConstraintEntityA"
             label="First line" tooltip="Select a line" shape_types="edge">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
           <validator id="PartSet_DifferentObjects"/>
         </sketch_shape_selector>
-        
+
         <sketch_shape_selector id="ConstraintEntityB"
             label="Second line" tooltip="Select a line" shape_types="edge">
           <validator id="GeomValidators_ShapeType" parameters="line"/>
@@ -498,9 +1022,8 @@
         </sketch_shape_selector>
         <validator id="PartSet_CollinearSelection"/>
       </feature>
-      -->
-         
+
     </group>
-    
+
   </workbench>
 </plugin>