X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2Fdoc%2FSketchPlugin.rst;h=af4cefe57be960111ca2cb96c8aedc0e0376e77b;hb=79470833af46e5a11abc700ebd07a26ec3e2d5a0;hp=ce7b6fd1920467a943cc0457e7826acf463c0bfe;hpb=0fcd69345a4dfdb31e252574c68bc70e123999e8;p=modules%2Fshaper.git

diff --git a/src/SketchPlugin/doc/SketchPlugin.rst b/src/SketchPlugin/doc/SketchPlugin.rst
index ce7b6fd19..af4cefe57 100644
--- a/src/SketchPlugin/doc/SketchPlugin.rst
+++ b/src/SketchPlugin/doc/SketchPlugin.rst
@@ -1,11 +1,12 @@
 
 .. _sketchPlugin:
-.. |SketchButton.icon|    image:: images/SketchButton.png
 
 
 Sketch plug-in
 ================
 
+.. |SketchButton.icon|    image:: images/SketchButton.png
+
 Sketch plug-in includes features for creation of 2D shapes.
 
 The sketch creation takes the following steps:
@@ -24,7 +25,7 @@ To create a Sketch:
 
 First define a plane for the sketch:
 
-.. image:: images/PlaneDefinition.png
+.. figure:: images/PlaneDefinition.png
    :align: center
 
 - specify plane size (equal to 25 in the example above);
@@ -32,22 +33,25 @@ First define a plane for the sketch:
 
 Note that coordinate planes will be suggested for selection if no convenient objects for plane selection are displayed in the viewer:
 
-.. image:: images/CoordinatePlanes.png
+.. figure:: images/CoordinatePlanes.png
    :align: center
 
 After the plane for sketch is selected, the following property panel will be opened:
 
-.. image:: images/SketchPanel.png
+.. figure:: images/SketchPanel.png
    :align: center
 
-.. centered::
-  Sketch general panel
+   Sketch general panel
 
 - **Reversed** check box - allows reversing the sketch plane normal;
 - **Set plane view** button - switches the viewer to the top view for the sketch plane;
 - **Show geometrical constraints** check box - displays/hides geometrical constraints:
 - **Show dimensional constraints** check box - displays/hides dimensional constraints; 
 - **Show existing expressions** check box - displays/hides expressions.
+- **Show free points** check box - highlights free points in the current sketch if it is checked.
+- **Automatic constraints** - automatically create horizontal or vertical constraints if angle between created line and horizontal or vertical less then angular tolerance (defined in preferences).
+- **Change sketch plane** button - allows to change working plane of the current sketch.
+- **Show remaining DoFs** button - highlights all sketch edges which are not fully constrained.
 
 Now it is possible to:
 
@@ -86,6 +90,9 @@ The plug-in includes the following features for creation of 2D objects:
    rectangleFeature.rst
    circleFeature.rst
    arcFeature.rst
+   ellipseFeature.rst
+   arcEllipseFeature.rst
+   bsplineFeature.rst
 
 .. _sketch_constraints:
 
@@ -98,19 +105,17 @@ The goal of constraints creation is to fix sketch geometry, i.e. set degrees of
 
 If all degrees of freedom are eliminated, the sketch is fixed and displayed with green color.
 
-.. image:: images/Sketch_fixed.png
+.. figure:: images/Sketch_fixed.png
    :align: center
 
-.. centered::
-  Fixed Sketch
+   Fixed Sketch
 
 If any degrees of freedom remain unsolved, the sketch is under-constrained and displayed with red color.
 
-.. image:: images/Sketch_underconstrained.png
+.. figure:: images/Sketch_underconstrained.png
    :align: center
 
-.. centered::
-  Underconstrained Sketch
+   Underconstrained Sketch
 
 The plug-in includes the following constraints:
 
@@ -136,6 +141,25 @@ The plug-in includes the following constraints:
 
 .. _sketch_operations:
 
+Overconstraned state
+--------------------
+
+Sketcher comes into overconstrained state when an extra constraint was defined. The following picture shows an example of the overconstrained state:
+
+.. figure:: images/Overconstrained.png
+   :align: center
+
+   Overconstrained Sketch
+
+When Sketcher gets this state then:
+
+- buttons Apply and Cancel for the whole Sketcher are blocked;
+- a constraint which causes the overconstraint state is highlightid by red color;
+- a warning message in sketcher Property Panel is shown with recomendation what to do in this case;
+- an additional Undo button is shown under the warning messages;
+
+After undoing the last operation or deletion of a conflicting constraint Sketcher will be reverted into a normal state.
+
 Operations
 ----------
 Operations modify existing features of the sketch or create new ones by copying them.
@@ -154,3 +178,4 @@ The plug-in includes the following operations:
    translationFeature.rst
    rotationFeature.rst
    sketchDrawer.rst
+   sketchCopy.rst