X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2FSketchPlugin_msg_en.ts;h=2fcae36b395e81ec9b6ec45c48b8d0c4bad51b55;hb=21a0c85b52bb93f94680e2342370764e6510e387;hp=bd3f891bbf7f9511db89131f6b0d451e712392ff;hpb=64acf693a5f64816b8c40167cf5aaf56d45af132;p=modules%2Fshaper.git diff --git a/src/SketchPlugin/SketchPlugin_msg_en.ts b/src/SketchPlugin/SketchPlugin_msg_en.ts old mode 100644 new mode 100755 index bd3f891bb..2fcae36b3 --- a/src/SketchPlugin/SketchPlugin_msg_en.ts +++ b/src/SketchPlugin/SketchPlugin_msg_en.ts @@ -1,15 +1,2047 @@ - + + Sketch:Model_FeatureValidator + + Attribute "DirX" is not initialized. + Select a plane for the sketch + + + + Sketch:Model_FeatureValidator + + Attribute "Features" is not initialized. + Sketch objects are not defined + + + + Sketch:External:GeomValidators_Face + + The attribute with the %1 type is not processed + Only attribute selection can be used for the sketch face, not %1 + + + + Sketch:External:GeomValidators_Face + + The shape is not a face. + Sketch can be created only on a face + + + + Sketch:External:GeomValidators_Face + + The shape is not a plane. + Sketch can be created only on a planar face + + + + Sketch:External:GeomValidators_Face + + The shape is not a cylinder. + Sketch can be created only on a cylindrical face + + + + Sketch:External:GeomValidators_Face + + The shape is not an available face. + Sketch cannot be created on the selected face + + + + Sketch:Model_FeatureValidator + + Attribute "External" is not initialized. + Select the sketch plane + + + + Sketch:Model_FeatureValidator + + Attribute "SolverDOF" is not initialized. + Can not compute degrees of freedom + + + + Sketch:Model_FeatureValidator + + Attribute "SolverError" is not initialized. + Can not compute the solver error + + + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive + + Double is not positive. + Radius value is not positive + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "circle_center" is not initialized. + A center point is not selected + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "FirstPoint" is not initialized. + A first point is not selected + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "SecondPoint" is not initialized. + A second point is not selected + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "ThirdPoint" is not initialized. + A third point is not selected + + + + SketchMacroCircle:CircleCenter + + Attribute "circle_center" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:FirstPoint + + Attribute "FirstPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:SecondPoint + + Attribute "SecondPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:ThirdPoint + + Attribute "ThirdPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:CircleRadius + + Attribute "circle_radius" is locked by modification value in the viewer. + Select a radius distance + + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive + + Integer is not initialized. + Integer radius is not initialized + + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive + + Integer is not positive. + Integer radius must be set + + + + SketchMacroCircle:Model_FeatureValidator + + Attribute "circle_radius" is not initialized. + Set the circle radius + + + + + SketchConstraintHorizontal:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Line is not selected + + + + SketchConstraintHorizontal + + ModelAPI_StateInvalidArgument + Wrong object is selected + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Line is not selected + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1 + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The constraint argument refers to nothing + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The constraint argument refers to %1 but must be %2 + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The constraint argument of type %1 is not supported + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintPerpendicular:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First line is not selected + + + + SketchConstraintPerpendicular:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second line is not selected + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First line is not selected + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second line is not selected + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The second line references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second line refers to nothing + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second line refers to %1 but must be %2 + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The second line of type %1 is not supported + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The second line refers to not existing item + + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The second line refers to the empty shape + + + + SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Two external lines can not be constrained as perpendicular + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line shape type is "%1", it should be "%2" + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Two external lines can not be constrained as perpendicular + + + + + SketchConstraintRadius:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Circle is not selected + + + + SketchConstraintRadius:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Radius value is not positive + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Double is not positive. + Radius must be positive + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Integer radius must be set + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer radius must be positive + + + + SketchConstraintRadius:Model_FeatureValidator + + Attribute "ConstraintValue" is not initialized. + Set the radius + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The circle argument refers to nothing + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The circle argument shape type is "%1", it should be "%2" + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintVertical - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. - Line for constraint is not selected. + ModelAPI_StateInvalidArgument + Wrong object is selected + + + + SketchConstraintVertical:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Line is not selected + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Line is not selected + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The first line references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line refers to %1 but must be %2 + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The first line of type %1 is not supported + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The first line refers to not existing item + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The first line refers to the empty shape + + + + + SketchLine:GeomValidators_Different + + Attributes StartPoint and EndPoint are equal. + Start point and end point are the same + + + + SketchLine:Model_FeatureValidator + + Attribute "EndPoint" is not initialized. + End point is not selected + + + + SketchLine:EndPoint + + Attribute "EndPoint" is locked by modification value in the viewer. + Select an end point in the viewer + + + + SketchLine:StartPoint + + Attribute "StartPoint" is locked by modification value in the viewer. + Select a start point in the viewer + + + + SketchLine:StartPoint + + Attribute "StartPoint" is not initialized. + Start point is not selected + + + + SketchLine:EndPoint + + Attribute "EndPoint" is not initialized. + End point is not selected + + + + SketchLine:Model_FeatureValidator + + Attribute "StartPoint" is not initialized. + Select a start point + + + + + SketchPoint:Model_FeatureValidator + + Attribute "PointCoordinates" is not initialized. + Point is not defined + + + + SketchPoint:PointCoordinates + + Attribute "PointCoordinates" is locked by modification value in the viewer. + Select a point + + + + + SketchRectangle:GeomValidators_Different + + Attributes RectStartPoint and RectEndPoint are equal. + Start point and end point must be different + + + + SketchRectangle:RectEndPoint + + Attribute "RectEndPoint" is locked by modification value in the viewer. + Select an end point of the rectangle + + + + SketchRectangle:RectStartPoint + + Attribute "RectStartPoint" is locked by modification value in the viewer. + Select a first point of the rectangle + + + + SketchRectangle:Model_FeatureValidator + + Attribute "RectStartPoint" is not initialized. + Select a first point of the rectangle + + + + SketchRectangle:Model_FeatureValidator + + Attribute "RectEndPoint" is not initialized. + Select an end point of the rectangle + + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Double is not initialized. + Radius value is not positive + + + + SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint + + The attribute ArcTangentPoint should be a point + Arc tangent point is not selected + + + + SketchArc:ArcCenter + + Attribute "center_point" is locked by modification value in the viewer. + Select a center point + + + + SketchArc:ArcCenter + + Attribute "center_point" is not initialized. + Center point is not defined + + + + SketchArc:ArcEndPoint + + Attribute "ArcEndPoint" is locked by modification value in the viewer. + Select an end point + + + + SketchArc:ArcPassedPoint + + Attribute "ArcPassedPoint" is locked by modification value in the viewer. + Select an intermediate point + + + + SketchArc:ArcStartPoint + + Attribute "ArcStartPoint" is locked by modification value in the viewer. + Select a start point + + + + SketchArc:GeomValidators_Different + + Attributes ArcCenter and ArcStartPoint are equal. + Center point and end point must be different + + + + SketchArc:GeomValidators_Different + + Attributes ArcStartPoint and ArcEndPoint are equal. + Start point and end point must be different + + + + SketchArc:Model_FeatureValidator + + Attribute "ArcEndPoint" is not initialized. + End point is not defined + + + + SketchArc:Model_FeatureValidator + + Attribute "ArcPassedPoint" is not initialized. + Intermediate point is not defined + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Double is not positive. + Acr radius must e positive + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Integer is not initialized. + Integer arc radius must be set + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Integer is not positive. + Integer arc radius must be positive + + + + SketchArc:Model_FeatureValidator + + Attribute "center_point" is not initialized. + Select an arc center + + + + SketchArc:Model_FeatureValidator:ArcStartPoint + + Attribute "start_point" is not initialized. + Select an arc start point + + + + SketchArc:Model_FeatureValidator + + Attribute "end_point" is not initialized. + Select an arc end point + + + + SketchArc:Model_FeatureValidator + + Attribute "ArcPassedPoint" is not initialized. + Select an arc passed point + + + + SketchArc:Model_FeatureValidator + + Attribute "ArcTangentPoint" is not initialized. + Select an arc tangent point + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Line is not selected + + + + SketchConstraintMirror:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Mirror line is not selected + + + + SketchConstraintMirror:Model_FeatureValidator + + Attribute "ConstraintMirrorList" is not initialized. + Objects for mirror are not selected + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The mirror line references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The mirror line refers to nothing + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The mirror line refers to %1 but must be %2 + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The mirror line of type %1 is not supported + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The mirror line refers to not existing item + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The mirror line refers to the empty shape + + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "AngleType" is not initialized. + Type of angle is not defined + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "MultiRotationCenter" is not initialized. + Rotation center is not selected + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The object is empty + Rotation center is not selected + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Double is not initialized. + The total number of rotated objects is not set + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Double is not positive. + The total number of rotated objects must be positive + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Integer is not initialized. + The total number of rotated objects is not set + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Integer is not positive. + The total number of rotated objects must be positive + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "MultiRotationList" is not initialized. + Select objects to rotate + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "MultiRotationAngle" is not initialized. + Set rotation angle + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "MultiRotationObjects" is not initialized. + Set the number of resulting objects + + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator + + The object %1 is a result of copy + The object %1 is a result of copy and can not be rotated + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + It has reference to an empty attribute + The rotation center refers to nothing + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The rotation center shape type is "%1", it should be "%2" + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The result is empty + The rotation center refers to not existing item + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The shape is empty + The rotation center refers to the empty shape + + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "MultiTranslationEndPoint" is not initialized. + End point of translation vector is not defined + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "MultiTranslationList" is not initialized. + Objects for translation are not selected + + + + SketchMultiTranslation:GeomValidators_ShapeType + + The object is empty + End point of translation vector is not selected + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The object is empty + Start point of translation vector is not selected + + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Double is not initialized. + The total number of translated objects is not set + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Double is not positive. + The total number of translated objects must be positive + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Integer is not initialized. + The total number of translated objects is not set + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Integer is not positive. + The total number of translated objects must be positive + + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "MultiTranslationStartPoint" is not initialized. + Select a start point + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "MultiTranslationObjects" is not initialized. + Select a total number of objects + + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator + + The object %1 is a result of copy + The object %1 is a result of copy and can not be translated + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + It has reference to an empty attribute + The translation start point refers to nothing + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The translation start point shape type is "%1", it should be "%2" + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The object is empty + Select a start point + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The result is empty + The start point refers to not existing item + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The shape is empty + The start point refers to the empty shape + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + It has reference to an empty attribute + The translation end point refers to nothing + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The translation end point shape type is "%1", it should be "%2" + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The object is empty + Select an end point + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The result is empty + The end point refers to not existing item + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The shape is empty + The end point refers to the empty shape + + + + + SketchConstraintAngle:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An angle can not be created between two external objects + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "AngleValue" is not initialized. + Set the angle value + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "AngleType" is not initialized. + Type of angle is not set + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first object refers to nothing + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first object shape type is "%1", it should be "%2" + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Angle can not be created on two external entities + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second object refers to nothing + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second object shape type is "%1", it should be "%2" + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Diferent objects should be selected + + + + SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Diferent objects should be selected + + + + SketchConstraintCoincidence:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintCoincidence:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A coincidence can not be created between two external objects + + + + SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A coincidence can not be created between two external objects + + + + + SketchConstraintDistance:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Distance value must be set + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Double is not positive. + Distance value must be positive + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Integer distance value must be set + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer distance value must be positive + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "ConstraintValue" is not initialized. + Set the distance + + + + SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Distance can not be set between two external objects + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first object refers to nothing + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first object shape type is "%1", it should be "%2" + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Distance can not be set between two external objects + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second object refers to nothing + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second object shape type is "%1", it should be "%2" + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Diferent objects should be selected + + + + SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Diferent objects should be selected + + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr + + An empty object is used. + An empty object is used + + + + SketchConstraintEqual:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintEqual:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An equality can not be set between two external objects + + + + SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An equality can not be set between two external objects + + + + + SketchConstraintLength:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Set the length value + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Line is not selected + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Double is not positive. + Length value is not positive + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Set the integer length value + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer length value is not positive + + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Line is not selected + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "ConstraintValue" is not initialized. + Set the length value + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The line refers to nothing + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The line shape type is "%1", it should be "%2" + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Diferent objects should be selected + + + + SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Diferent objects should be selected + + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr + + Middle point constraint allows points and lines only + Not point or line is selected + + + + SketchConstraintMiddle:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintMiddle:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A middle can not be set for two external objects + + + + SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A middle can not be set for two external objects + + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintParallel:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First line is not selected + + + + SketchConstraintParallel:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second line is not selected + + + + SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A parallel can not be set between two external objects + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line shape type is "%1", it should be "%2" + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A parallel can not be set between two external objects + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second line refers to nothing + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second line shape type is "%1", it should be "%2" + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintRigid:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Object is not selected + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The fixed constraint references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The fixed constraint refers to nothing + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The fixed constraint refers to %1 but must be %2 + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The fixed constraint of type %1 is not supported + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The fixed constraint refers to not existing item + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The fixed constraint refers to the empty shape + + + + + SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Diferent objects should be selected + + + + SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Diferent objects should be selected + + + + SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr + + It uses an empty object + Selection is not valid + + + + SketchConstraintTangent:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + First object is not selected + + + + SketchConstraintTangent:Model_FeatureValidator + + Attribute "ConstraintEntityB" is not initialized. + Second object is not selected + + + + + SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator + + The attribute with the %1 type is not processed + Only attribute selection can be used for the sketch face, not %1 + + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Set the fillet radius + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Double is not positive. + The fillet radius must be positive + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Set the integer fillet radius + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + The integer fillet radius must be positive + + + + SketchFillet:Model_FeatureValidator + + Attribute "ConstraintEntityA" is not initialized. + Select one or several points for filet + + + + SketchFillet:Model_FeatureValidator + + Attribute "ConstraintValue" is not initialized. + Set the fillet radius + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: List of points is empty. + List of points is empty + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: one of the selected point does not have coicidence. + One of the selected point does not have coicidence + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: One of the selected points does not have two suitable edges for fillet. + One of the selected points does not have two suitable edges for fillet + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: Edges in selected point has tangent constraint. + Edges in selected point has tangent constraint + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: Edges in selected point has tangent constraint. + Edges in selected point has tangent constraint + + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute with the %1 type is not processed + An argument of type %1 of the projection feature is not supported + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute %1 should be an edge + The projected item must be an edge + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + There is no sketch referring to the current feature + The projection feature has no sketch + + + + SketchProjection:Model_FeatureValidator - ModelAPI_StateInvalidArgument - Wrong argument for the constraint + Attribute "ExternalFeature" is not initialized. + - +