X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2FSketchPlugin_msg_en.ts;h=1361cdc7919ed7eed4120bbcc8a647f307c438a3;hb=c2703b4647f9b1ebc6ec1f4a378721dde523159f;hp=5a7e90e6eaff0fdaf4d5ff08416586019d5a9ff7;hpb=53b5b11e96fa0bb95c007e7022c83ad08119d163;p=modules%2Fshaper.git diff --git a/src/SketchPlugin/SketchPlugin_msg_en.ts b/src/SketchPlugin/SketchPlugin_msg_en.ts index 5a7e90e6e..1361cdc79 100644 --- a/src/SketchPlugin/SketchPlugin_msg_en.ts +++ b/src/SketchPlugin/SketchPlugin_msg_en.ts @@ -1,267 +1,630 @@ + + + workshop + + Curve fitting + Curve fitting + + + + + - Sketch + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "DirX" is not initialized. + Attribute "%1" is not initialized. Select a plane for the sketch + + + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "Features" is not initialized. + Attribute "%1" is not initialized. Sketch objects are not defined + + + Sketch:External:GeomValidators_Face - External - GeomValidators_Face: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed Only attribute selection can be used for the sketch face, not %1 + + + Sketch:External:GeomValidators_Face - External - GeomValidators_Face: The shape is not a face. + The shape is not a face. Sketch can be created only on a face + + + Sketch:External:GeomValidators_Face - External - GeomValidators_Face: The shape is not a plane. + The shape is not a plane. Sketch can be created only on a planar face + + + Sketch:External:GeomValidators_Face - External - GeomValidators_Face: The shape is not a cylinder. + The shape is not a cylinder. Sketch can be created only on a cylindrical face + + + Sketch:External:GeomValidators_Face - External - GeomValidators_Face: The shape is not an available face. + The shape is not an available face. Sketch cannot be created on the selected face + + + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "External" is not initialized. + Attribute "%1" is not initialized. Select the sketch plane + + + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "SolverDOF" is not initialized. + Attribute "%1" is not initialized. Can not compute degrees of freedom + + + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "SolverError" is not initialized. + Attribute "%1" is not initialized. Can not compute the solver error - + - SketchCircle + SketchMacroCircle:center_point - CircleRadius - GeomValidators_Positive: Double is not positive. - Radius value is not positive + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + + Attribute "%1" is not initialized. + Select a point in the viewer + + + + SketchMacroCircle:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive + + Value is too small. + Radius value is too small + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "CircleCenter" is not initialized. + Attribute "%1" is not initialized. A center point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "FirstPoint" is not initialized. + Attribute "%1" is not initialized. A first point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "SecondPoint" is not initialized. + Attribute "%1" is not initialized. A second point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ThirdPoint" is not initialized. + Attribute "%1" is not initialized. A third point is not selected + + + SketchMacroCircle:CircleCenter + + Attribute "circle_center" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:FirstPoint + + Attribute "FirstPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:SecondPoint + + Attribute "SecondPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:ThirdPoint - Attribute "CircleCenter" is locked by modification value in the viewer. + Attribute "ThirdPoint" is locked by modification value in the viewer. Select a center point + + + SketchMacroCircle:CircleRadius - Attribute "CircleRadius" is locked by modification value in the viewer. + Attribute "circle_radius" is locked by modification value in the viewer. Select a radius distance + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive - CircleRadius - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Integer radius is not initialized + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive - CircleRadius - GeomValidators_Positive: Integer is not positive. + Integer is not positive. Integer radius must be set + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "CircleRadius" is not initialized. + Attribute "%1" is not initialized. Set the circle radius + + + SketchMacroArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroArc:center_point + + Attribute "%1" is locked by modification value in the viewer. + Select a center point. + + + + SketchMacroArc:end_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_3 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + Attribute "%1" is not initialized. + Select an end point in the viewer. + + + + SketchMacroArc:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select an passed point in the viewer. + + + + SketchMacroArc:start_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + SketchMacroArc:start_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + + SketchMacroEllipse:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroEllipse:first_point + + Attribute "%1" is locked by modification value in the viewer. + Select a first point in the viewer. + + + + SketchMacroEllipse:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a passed point. + + + + SketchMacroEllipse:second_point + + Attribute "%1" is locked by modification value in the viewer. + Select a second point. + + + + + SketchMacroEllipticArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroEllipticArc:center + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Attribute "%1" is not initialized. + Select a center point. + + + + SketchMacroEllipticArc:end_point + + Attribute "%1" is locked by modification value in the viewer. + Select an end point. + + + Attribute "%1" is not initialized. + Select an end point. + + + + SketchMacroEllipticArc:major_axis_point + + Attribute "%1" is locked by modification value in the viewer. + Select a major axis point. + + + Attribute "%1" is not initialized. + Select a major axis point. + + + + + SketchSplit:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a segment to split in the viewer. + + + + SketchSplit:SelectedObject:SketchPlugin_SplitValidator + + Select a segment to split in the viewer. + + + - SketchConstraintHorizontal + SketchConstraintHorizontal:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected + + + SketchConstraintHorizontal ModelAPI_StateInvalidArgument Wrong object is selected + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Line is not selected + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1 + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The constraint argument refers to nothing + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The constraint argument refers to %1 but must be %2 + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The constraint argument of type %1 is not supported + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape + - SketchConstraintPerpendicular + SketchConstraintPerpendicular:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First line is not selected + + + SketchConstraintPerpendicular:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second line is not selected + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty First line is not selected + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The object is empty + The object is empty Second line is not selected + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 The second line references to not acceptable shape type. The type should be: %1 + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The second line refers to nothing + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The second line refers to %1 but must be %2 + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The second line of type %1 is not supported + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The result is empty + The result is empty The second line refers to not existing item + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The shape is empty + The shape is empty The second line refers to the empty shape - + + + + SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. Two external lines can not be constrained as perpendicular + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The first line refers to nothing + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The first line shape type is "%1", it should be "%2" + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape + + + SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. Two external lines can not be constrained as perpendicular - SketchConstraintRadius + SketchConstraintRadius:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Circle is not selected + + + SketchConstraintRadius:ConstraintFlyoutValuePnt Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. Flyout value point is not clicked in the viewer + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Object is not selected + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not initialized. + Double is not initialized. Radius value is not positive - + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not positive. - Radius must be positive + Value is too small. + Radius is too small + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Integer radius must be set + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not positive. + Integer is not positive. Integer radius must be positive - + + + SketchConstraintRadius:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the radius + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The circle argument refers to nothing + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The circle argument shape type is "%1", it should be "%2" + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape @@ -272,82 +635,132 @@ ModelAPI_StateInvalidArgument Wrong object is selected + + + SketchConstraintVertical:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Line is not selected - + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 The first line references to not acceptable shape type. The type should be: %1 + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The first line refers to nothing + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The first line refers to %1 but must be %2 + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The first line of type %1 is not supported + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The first line refers to not existing item + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The first line refers to the empty shape - SketchLine + SketchLine:GeomValidators_Different - GeomValidators_Different: Attributes StartPoint and EndPoint are equal. + Attributes StartPoint and EndPoint are equal. Start point and end point are the same + + + SketchLine:Model_FeatureValidator - Model_FeatureValidator: Attribute "EndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not selected - - Attribute "EndPoint" is locked by modification value in the viewer. + + + SketchLine:EndPoint + + Attribute "%1" is locked by modification value in the viewer. Select an end point in the viewer + + + SketchLine:StartPoint - Attribute "StartPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a start point in the viewer + + + SketchLine:StartPoint - Attribute "StartPoint" is not initialized. + Attribute "%1" is not initialized. Start point is not selected + + + SketchLine:EndPoint - Attribute "EndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not selected - + + + SketchLine:Model_FeatureValidator - Model_FeatureValidator: Attribute "StartPoint" is not initialized. + Attribute "%1" is not initialized. Select a start point - + - SketchPoint + SketchPoint:Model_FeatureValidator - Model_FeatureValidator: Attribute "PointCoordindates" is not initialized. + Attribute "%1" is not initialized. Point is not defined + + + SketchPoint:PointCoordinates + + Attribute "%1" is not initialized. + Select a point + + + + SketchPoint:PointCoordinates - Attribute "PointCoordindates" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a point @@ -355,907 +768,1717 @@ SketchRectangle - GeomValidators_Different: Attributes RectStartPoint and RectEndPoint are equal. - Start point and end point must be different + Create rectangle + Create rectangle + + + Rectangle + Rectangle + + + + SketchRectangle:Auxiliary + + Auxiliary + Auxiliary + + + Construction element + Construction element + + + + SketchRectangle:RectCenterPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Center + Center + + + + SketchRectangle:RectCornerPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Corner + Corner + + + + SketchRectangle:RectEndPoint + + Attribute "%1" is not initialized. + Select a point. + + + End point + End point + + + SketchRectangle:RectStartPoint - Attribute "RectEndPoint" is locked by modification value in the viewer. - Select an end point of the rectangle + Attribute "%1" is not initialized. + Select a point. - Attribute "RectStartPoint" is locked by modification value in the viewer. - Select a first point of the rectangle + Start point + Start point - + + + SketchRectangle:RectangleType - Model_FeatureValidator: Attribute "RectStartPoint" is not initialized. - Select a first point of the rectangle + Rectangle by center and corner + Rectangle by center and corner - Model_FeatureValidator: Attribute "RectEndPoint" is not initialized. - Select an end point of the rectangle + Rectangle by corners + Rectangle by corners - SketchArc + SketchArc:ArcRadius:GeomValidators_Positive - ArcRadius - GeomValidators_Positive: Double is not initialized. + Double is not initialized. Radius value is not positive + + + SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint - ArcTangentPoint - SketchPlugin_ArcTangentPoint: The attribute ArcTangentPoint should be a point + The attribute ArcTangentPoint should be a point Arc tangent point is not selected + + + SketchArc:ArcCenter - Attribute "ArcCenter" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a center point + + + SketchArc:ArcCenter - Attribute "ArcCenter" is not initialized. + Attribute "%1" is not initialized. Center point is not defined + + + SketchArc:ArcEndPoint - Attribute "ArcEndPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select an end point + + + SketchArc:ArcPassedPoint - Attribute "ArcPassedPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select an intermediate point + + + SketchArc:ArcStartPoint - Attribute "ArcStartPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a start point + + + SketchArc:GeomValidators_Different - GeomValidators_Different: Attributes ArcCenter and ArcStartPoint are equal. + Attributes ArcCenter and ArcStartPoint are equal. Center point and end point must be different + + + SketchArc:GeomValidators_Different - GeomValidators_Different: Attributes ArcStartPoint and ArcEndPoint are equal. + Attributes ArcStartPoint and ArcEndPoint are equal. Start point and end point must be different + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcEndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not defined + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcPassedPoint" is not initialized. + Attribute "%1" is not initialized. Intermediate point is not defined + + + SketchArc:ArcRadius:GeomValidators_Positive - ArcRadius - GeomValidators_Positive: Double is not positive. - Acr radius must e positive + Value is too small. + Arc radius is too small + + + SketchArc:ArcRadius:GeomValidators_Positive - ArcRadius - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Integer arc radius must be set + + + SketchArc:ArcRadius:GeomValidators_Positive - ArcRadius - GeomValidators_Positive: Integer is not positive. + Integer is not positive. Integer arc radius must be positive - + + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcCenter" is not initialized. + Attribute "%1" is not initialized. Select an arc center + + + SketchArc:Model_FeatureValidator:ArcStartPoint - Model_FeatureValidator: Attribute "ArcStartPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc start point + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcEndPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc end point + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcPassedPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc passed point + + + SketchArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ArcTangentPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc tangent point - SketchConstraintMirror + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Line is not selected + + + SketchConstraintMirror:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Mirror line is not selected + + + SketchConstraintMirror:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintMirrorList" is not initialized. + Attribute "%1" is not initialized. Objects for mirror are not selected + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 The mirror line references to not acceptable shape type. The type should be: %1 + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The mirror line refers to nothing + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The mirror line refers to %1 but must be %2 + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The mirror line of type %1 is not supported + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The mirror line refers to not existing item + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The mirror line refers to the empty shape - SketchMultiRotation + SketchMultiRotation:Model_FeatureValidator - Model_FeatureValidator: Attribute "AngleType" is not initialized. + Attribute "%1" is not initialized. Type of angle is not defined + + + SketchMultiRotation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiRotationCenter" is not initialized. + Attribute "%1" is not initialized. Rotation center is not selected + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: The object is empty + The object is empty Rotation center is not selected - + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive - MultiRotationObjects - GeomValidators_Positive: Double is not initialized. + Double is not initialized. The total number of rotated objects is not set + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive - MultiRotationObjects - GeomValidators_Positive: Double is not positive. + Value is too small. The total number of rotated objects must be positive + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive - MultiRotationObjects - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. The total number of rotated objects is not set + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive - MultiRotationObjects - GeomValidators_Positive: Integer is not positive. + Integer is not positive. The total number of rotated objects must be positive - + + + SketchMultiRotation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiRotationList" is not initialized. + Attribute "%1" is not initialized. Select objects to rotate + + + SketchMultiRotation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiRotationAngle" is not initialized. + Attribute "%1" is not initialized. Set rotation angle + + + SketchMultiRotation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiRotationObjects" is not initialized. + Attribute "%1" is not initialized. Set the number of resulting objects + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator - MultiRotationList - SketchPlugin_CopyValidator: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator - MultiRotationList - SketchPlugin_CopyValidator: The object %1 is a result of copy + The object %1 is a result of copy The object %1 is a result of copy and can not be rotated + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The rotation center refers to nothing + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The rotation center shape type is "%1", it should be "%2" + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: The result is empty + The result is empty The rotation center refers to not existing item + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType - MultiRotationCenter - GeomValidators_ShapeType: The shape is empty + The shape is empty The rotation center refers to the empty shape - SketchMultiTranslation + SketchMultiTranslation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiTranslationEndPoint" is not initialized. + Attribute "%1" is not initialized. End point of translation vector is not defined + + + SketchMultiTranslation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiTranslationList" is not initialized. + Attribute "%1" is not initialized. Objects for translation are not selected + + + SketchMultiTranslation:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: The object is empty + The object is empty End point of translation vector is not selected + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: The object is empty + The object is empty Start point of translation vector is not selected - + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive - MultiTranslationObjects - GeomValidators_Positive: Double is not initialized. + Double is not initialized. The total number of translated objects is not set + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive - MultiTranslationObjects - GeomValidators_Positive: Double is not positive. + Value is too small. The total number of translated objects must be positive + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive - MultiTranslationObjects - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. The total number of translated objects is not set + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive - MultiTranslationObjects - GeomValidators_Positive: Integer is not positive. + Integer is not positive. The total number of translated objects must be positive + + + SketchMultiTranslation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiTranslationStartPoint" is not initialized. + Attribute "%1" is not initialized. Select a start point + + + SketchMultiTranslation:Model_FeatureValidator - Model_FeatureValidator: Attribute "MultiTranslationObjects" is not initialized. + Attribute "%1" is not initialized. Select a total number of objects + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator - MultiTranslationList - SketchPlugin_CopyValidator: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator - MultiTranslationList - SketchPlugin_CopyValidator: The object %1 is a result of copy + The object %1 is a result of copy The object %1 is a result of copy and can not be translated + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The translation start point refers to nothing + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The translation start point shape type is "%1", it should be "%2" + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: The object is empty + The object is empty Select a start point + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: The result is empty + The result is empty The start point refers to not existing item + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType - MultiTranslationStartPoint - GeomValidators_ShapeType: The shape is empty + The shape is empty The start point refers to the empty shape + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The translation end point refers to nothing + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The translation end point shape type is "%1", it should be "%2" + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: The object is empty + The object is empty Select an end point + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: The result is empty + The result is empty The end point refers to not existing item + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType - MultiTranslationEndPoint - GeomValidators_ShapeType: The shape is empty + The shape is empty The end point refers to the empty shape - SketchConstraintAngle + SketchConstraintAngle:ConstraintFlyoutValuePnt Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. Flyout value point is not clicked in the viewer + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty First object is not selected + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The object is empty + The object is empty Second object is not selected - + + + SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. An angle can not be created between two external objects - + + + SketchConstraintAngle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintAngle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected + + + SketchConstraintAngle:Model_FeatureValidator - Model_FeatureValidator: Attribute "AngleValue" is not initialized. + Attribute "%1" is not initialized. Set the angle value + + + SketchConstraintAngle:Model_FeatureValidator - Model_FeatureValidator: Attribute "AngleType" is not initialized. + Attribute "%1" is not initialized. Type of angle is not set + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The first object refers to nothing + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The first object shape type is "%1", it should be "%2" + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape + + + SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. Angle can not be created on two external entities + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The second object refers to nothing + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The second object shape type is "%1", it should be "%2" + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape - SketchConstraintCoincidence + SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects - ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects - ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + SketchConstraintCoincidence:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintCoincidence:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected - + + + SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A coincidence can not be created between two external objects - - + + + + SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A coincidence can not be created between two external objects - SketchConstraintDistance + SketchConstraintDistance:ConstraintFlyoutValuePnt Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. Flyout value point is not clicked in the viewer + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty First object is not selected + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The object is empty + The object is empty Second object is not selected + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not initialized. + Double is not initialized. Distance value must be set + + + SketchConstraintDistance:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintDistance:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected - + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not positive. - Distance value must be positive + Value is too small. + Distance value is too small + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Integer distance value must be set + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not positive. + Integer is not positive. Integer distance value must be positive - - + + + + SketchConstraintDistance:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintDistance:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected + + + SketchConstraintDistance:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the distance + + + SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. Distance can not be set between two external objects + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The first object refers to nothing + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The first object shape type is "%1", it should be "%2" + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape + + + SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. Distance can not be set between two external objects + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The second object refers to nothing + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The second object shape type is "%1", it should be "%2" + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape - SketchConstraintEqual + SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects - ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects - ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr - ConstraintEntityB - SketchPlugin_EqualAttr: An empty object is used. + An empty object is used. An empty object is used - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + The %1 feature is not supported by the Equal constraint. + The %1 feature is not supported by the Equal constraint. + + + Features with kinds %1 and %2 can not be equal. + Features with kinds %1 and %2 can not be equal. + + + + SketchConstraintEqual:Model_FeatureValidator + + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintEqual:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected - + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. An equality can not be set between two external objects - - + + + + SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. An equality can not be set between two external objects - SketchConstraintLength + SketchConstraintLength:ConstraintFlyoutValuePnt Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. Flyout value point is not clicked in the viewer + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Object is not selected + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not initialized. + Double is not initialized. Set the length value + + + SketchConstraintLength:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected - + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not positive. - Length value is not positive + Value is too small. + Length value is too small + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Set the integer length value + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not positive. + Integer is not positive. Integer length value is not positive - + + + + SketchConstraintLength:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected + + + SketchConstraintLength:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the length value + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The line refers to nothing + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The line shape type is "%1", it should be "%2" + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape - SketchConstraintMiddle + SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects - ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects - ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr - ConstraintEntityB - SketchPlugin_MiddlePointAttr: Middle point constraint allows points and lines only + Middle point constraint allows points and lines only Not point or line is selected + + + SketchConstraintMiddle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintMiddle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected - + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A middle can not be set for two external objects - + + + SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A middle can not be set for two external objects - SketchConstraintParallel + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty First object is not selected + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The object is empty + The object is empty Second object is not selected + + + SketchConstraintParallel:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First line is not selected + + + SketchConstraintParallel:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second line is not selected - + + + SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator - ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A parallel can not be set between two external objects - + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The first line refers to nothing + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The first line shape type is "%1", it should be "%2" + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape + + + SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator - ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external. + Both features, attribute and attribute in parameter, are external. A parallel can not be set between two external objects + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 Shape type must be %1 + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The second line refers to nothing + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The second line shape type is "%1", it should be "%2" + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The attribute with the %1 type is not processed + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The result is empty + The result is empty The constraint argument refers to not existing item + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType - ConstraintEntityB - GeomValidators_ShapeType: The shape is empty + The shape is empty The constraint argument refers to the empty shape - SketchConstraintRigid + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The object is empty + The object is empty Object is not selected + + + SketchConstraintRigid:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Object is not selected - + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1 + It does not contain element with acceptable shape type. The type should be one of the next: %1 The fixed constraint references to not acceptable shape type. The type should be: %1 + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute + It has reference to an empty attribute The fixed constraint refers to nothing + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2" + Shape type is "%1", it should be "%2" The fixed constraint refers to %1 but must be %2 + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed + The attribute with the %1 type is not processed The fixed constraint of type %1 is not supported + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The result is empty + The result is empty The fixed constraint refers to not existing item + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType - ConstraintEntityA - GeomValidators_ShapeType: The shape is empty + The shape is empty The fixed constraint refers to the empty shape - SketchConstraintTangent + SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + + SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + + SketchConstraintTangent:ConstraintEntityA:SketchPlugin_TangentAttr - ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + Two segments cannot be tangent + Two segments cannot be tangent - ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + Two B-splines cannot be tangent + Two B-splines cannot be tangent + + + SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr - ConstraintEntityB - SketchPlugin_TangentAttr: It uses an empty object + It uses an empty object Selection is not valid + + + SketchConstraintTangent:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected + + + SketchConstraintTangent:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected - + + + SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator + + The attribute with the %1 type is not processed + Only attribute selection can be used for the sketch face, not %1 + + + - SketchConstraintFillet + SketchFillet:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not initialized. + Double is not initialized. Set the fillet radius + + + SketchFillet:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Double is not positive. + Value is too small. The fillet radius must be positive + + + SketchFillet:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not initialized. + Integer is not initialized. Set the integer fillet radius + + + SketchFillet:ConstraintValue:GeomValidators_Positive - ConstraintValue - GeomValidators_Positive: Integer is not positive. + Integer is not positive. The integer fillet radius must be positive + + + SketchFillet:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Select one or several points for filet + + + SketchFillet:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the fillet radius + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: List of points is empty. + Error: List of points is empty. List of points is empty + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: one of the selected point does not have coicidence. - One of the selected point does not have coicidence + Error: one of the selected point does not have coincidence. + One of the selected point does not have coincidence + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: One of the selected points does not have two suitable edges for fillet. + Error: One of the selected points does not have two suitable edges for fillet. One of the selected points does not have two suitable edges for fillet + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: Edges in selected point has tangent constraint. + Error: Edges in selected point has tangent constraint. Edges in selected point has tangent constraint + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: Edges in selected point has tangent constraint. + Error: Edges in selected point has tangent constraint. Edges in selected point has tangent constraint - + SketchProjection - ExternalFeature - SketchPlugin_ProjectionValidator: The attribute with the %1 type is not processed + Project feature onto sketch plane + Project feature onto sketch plane + + + Projection + Projection + + + + SketchProjection:ExternalFeature + + Attribute "%1" is not initialized. + Select external edge or vertex. + + + Object + Object + + + Select external edge or vertex. + Select external edge or vertex. + + + + SketchProjection:IncludeToResult + + Include into the sketch result + Include into the sketch result + + + Include projected feature into the sketch result + Include projected feature into the sketch result + + + + SketchProjection:keep_reference + + A sketch entity will be created without connection to the selected shape. + A sketch entity will be created without connection to the selected shape. + + + The reference to the original curve is stored. So it can be changed later. + The reference to the original curve is stored. So it can be changed later. + + + + SketchProjection:make_fixed + + Assign the Fixed constraint to the result of projection + Assign the Fixed constraint to the result of projection + + + Make projected curve fixed + Make projected curve fixed + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute with the %1 type is not processed An argument of type %1 of the projection feature is not supported - ExternalFeature - SketchPlugin_ProjectionValidator: The attribute %1 should be an edge - The projected item must be an edge + The attribute %1 should be an edge or vertex + The projected item must be an edge or a vertex - ExternalFeature - SketchPlugin_ProjectionValidator: There is no sketch referring to the current feature + There is no sketch referring to the current feature The projection feature has no sketch + + Unable to project feature from the same sketch + Feature from the current sketch cannot be projected + + + Error: Line is orthogonal to the sketch plane. + Error: Line is orthogonal to the sketch plane. + + + Error: Circle is orthogonal to the sketch plane. + Error: Circle is orthogonal to the sketch plane. + + + Error: Arc is orthogonal to the sketch plane. + Error: Arc is orthogonal to the sketch plane. + + + Error: Ellipse is orthogonal to the sketch plane. + Error: Ellipse is orthogonal to the sketch plane. + + + Error: Elliptic Arc is orthogonal to the sketch plane. + Error: Elliptic Arc is orthogonal to the sketch plane. + + + Error: Periodic B-spline is orthogonal to the sketch plane. + Error: Periodic B-spline is orthogonal to the sketch plane. + + + Error: Selected object is not supported for projection. + Error: Selected object is not supported for projection. + - + + - SketchProjection + SketchCurveFitting - Model_FeatureValidator: Attribute "ExternalFeature" is not initialized. - + Curve fitting + Curve fitting + + + Create curve passing through the points + Create curve passing through the points + + + Error: Feature "%1" does not support action "%2". + Error: Feature "%1" does not support action "%2". + + + + SketchCurveFitting:SketchPlugin_CurveFittingValidator + + Not enough points selected. Need at least %1 points. + Not enough points selected. Need at least %1 points. + + + + SketchCurveFitting:points + + Points + Points + + + Select points for curve fitting + Select points for curve fitting + + + Attribute "%1" is not initialized. + Select points for interpolation + + + + SketchCurveFitting:periodic + + Periodic + Periodic + + + Make curve periodic + Make curve periodic + + + + SketchCurveFitting:closed + + Closed + Closed + + + Make curve closed, but not periodic + Make curve closed, but not periodic + + + + SketchCurveFitting:type + + Interpolation + Interpolation + + + Approximation + Approximation + + + + SketchCurveFitting:precision + + Precision + Precision + + + Maximal distance from selected points to the curve + Maximal distance from selected points to the curve + + SketchCurveFitting:need_control_poly + + Create control polygon + Create control polygon + + + Specify if the control polygon should be created + Specify if the control polygon should be created + + + + SketchCurveFitting:reorder_points + + Reorder points + Reorder points + + + Sort selected points to minimize the distance heighbors + Sort selected points to minimize the distance heighbors + + + + SketchCurveFitting:Auxiliary + + Auxiliary + Auxiliary + + + Construction element + Construction element + + +