X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2FSketchPlugin_msg_en.ts;h=1361cdc7919ed7eed4120bbcc8a647f307c438a3;hb=5a5362530345c00af26fc8226f3066f749dde392;hp=35073532a9aa0da21eb161a7c403823d2c46033c;hpb=a94fc319f2aa64b43c9a73b5ff7063923648faec;p=modules%2Fshaper.git diff --git a/src/SketchPlugin/SketchPlugin_msg_en.ts b/src/SketchPlugin/SketchPlugin_msg_en.ts old mode 100755 new mode 100644 index 35073532a..1361cdc79 --- a/src/SketchPlugin/SketchPlugin_msg_en.ts +++ b/src/SketchPlugin/SketchPlugin_msg_en.ts @@ -1,17 +1,28 @@ + + + workshop + + Curve fitting + Curve fitting + + + + + Sketch:Model_FeatureValidator - Attribute "DirX" is not initialized. + Attribute "%1" is not initialized. Select a plane for the sketch Sketch:Model_FeatureValidator - Attribute "Features" is not initialized. + Attribute "%1" is not initialized. Sketch objects are not defined @@ -53,25 +64,43 @@ Sketch:Model_FeatureValidator - Attribute "External" is not initialized. + Attribute "%1" is not initialized. Select the sketch plane Sketch:Model_FeatureValidator - Attribute "SolverDOF" is not initialized. + Attribute "%1" is not initialized. Can not compute degrees of freedom Sketch:Model_FeatureValidator - Attribute "SolverError" is not initialized. + Attribute "%1" is not initialized. Can not compute the solver error - + + + SketchMacroCircle:center_point + + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + + Attribute "%1" is not initialized. + Select a point in the viewer + + + + SketchMacroCircle:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + SketchMacroCircle:CircleRadius:GeomValidators_Positive @@ -82,28 +111,28 @@ SketchMacroCircle:Model_FeatureValidator - Attribute "circle_center" is not initialized. + Attribute "%1" is not initialized. A center point is not selected SketchMacroCircle:Model_FeatureValidator - Attribute "FirstPoint" is not initialized. + Attribute "%1" is not initialized. A first point is not selected SketchMacroCircle:Model_FeatureValidator - Attribute "SecondPoint" is not initialized. + Attribute "%1" is not initialized. A second point is not selected SketchMacroCircle:Model_FeatureValidator - Attribute "ThirdPoint" is not initialized. + Attribute "%1" is not initialized. A third point is not selected @@ -159,15 +188,161 @@ SketchMacroCircle:Model_FeatureValidator - Attribute "circle_radius" is not initialized. + Attribute "%1" is not initialized. Set the circle radius + + + SketchMacroArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroArc:center_point + + Attribute "%1" is locked by modification value in the viewer. + Select a center point. + + + + SketchMacroArc:end_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_3 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + Attribute "%1" is not initialized. + Select an end point in the viewer. + + + + SketchMacroArc:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select an passed point in the viewer. + + + + SketchMacroArc:start_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + SketchMacroArc:start_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + + SketchMacroEllipse:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroEllipse:first_point + + Attribute "%1" is locked by modification value in the viewer. + Select a first point in the viewer. + + + + SketchMacroEllipse:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a passed point. + + + + SketchMacroEllipse:second_point + + Attribute "%1" is locked by modification value in the viewer. + Select a second point. + + + + + SketchMacroEllipticArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroEllipticArc:center + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Attribute "%1" is not initialized. + Select a center point. + + + + SketchMacroEllipticArc:end_point + + Attribute "%1" is locked by modification value in the viewer. + Select an end point. + + + Attribute "%1" is not initialized. + Select an end point. + + + + SketchMacroEllipticArc:major_axis_point + + Attribute "%1" is locked by modification value in the viewer. + Select a major axis point. + + + Attribute "%1" is not initialized. + Select a major axis point. + + + + + SketchSplit:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a segment to split in the viewer. + + + + SketchSplit:SelectedObject:SketchPlugin_SplitValidator + + Select a segment to split in the viewer. + + + SketchConstraintHorizontal:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected @@ -231,14 +406,14 @@ SketchConstraintPerpendicular:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First line is not selected SketchConstraintPerpendicular:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second line is not selected @@ -358,7 +533,7 @@ SketchConstraintRadius:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Circle is not selected @@ -407,7 +582,7 @@ SketchConstraintRadius:Model_FeatureValidator - Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the radius @@ -464,7 +639,7 @@ SketchConstraintVertical:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected @@ -528,42 +703,42 @@ SketchLine:Model_FeatureValidator - Attribute "EndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not selected SketchLine:EndPoint - Attribute "EndPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select an end point in the viewer SketchLine:StartPoint - Attribute "StartPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a start point in the viewer SketchLine:StartPoint - Attribute "StartPoint" is not initialized. + Attribute "%1" is not initialized. Start point is not selected SketchLine:EndPoint - Attribute "EndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not selected SketchLine:Model_FeatureValidator - Attribute "StartPoint" is not initialized. + Attribute "%1" is not initialized. Select a start point @@ -571,51 +746,100 @@ SketchPoint:Model_FeatureValidator - Attribute "PointCoordinates" is not initialized. + Attribute "%1" is not initialized. Point is not defined SketchPoint:PointCoordinates - Attribute "PointCoordinates" is locked by modification value in the viewer. + Attribute "%1" is not initialized. + Select a point + + + + SketchPoint:PointCoordinates + + Attribute "%1" is locked by modification value in the viewer. Select a point - SketchRectangle:GeomValidators_Different + SketchRectangle - Attributes RectStartPoint and RectEndPoint are equal. - Start point and end point must be different + Create rectangle + Create rectangle + + + Rectangle + Rectangle - SketchRectangle:RectEndPoint + SketchRectangle:Auxiliary + + Auxiliary + Auxiliary + - Attribute "RectEndPoint" is locked by modification value in the viewer. - Select an end point of the rectangle + Construction element + Construction element - SketchRectangle:RectStartPoint + SketchRectangle:RectCenterPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Center + Center + + + + SketchRectangle:RectCornerPoint - Attribute "RectStartPoint" is locked by modification value in the viewer. - Select a first point of the rectangle + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Corner + Corner - SketchRectangle:Model_FeatureValidator + SketchRectangle:RectEndPoint + + Attribute "%1" is not initialized. + Select a point. + - Attribute "RectStartPoint" is not initialized. - Select a first point of the rectangle + End point + End point - SketchRectangle:Model_FeatureValidator + SketchRectangle:RectStartPoint + + Attribute "%1" is not initialized. + Select a point. + - Attribute "RectEndPoint" is not initialized. - Select an end point of the rectangle + Start point + Start point + + + + SketchRectangle:RectangleType + + Rectangle by center and corner + Rectangle by center and corner + + + Rectangle by corners + Rectangle by corners @@ -636,35 +860,35 @@ SketchArc:ArcCenter - Attribute "center_point" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a center point SketchArc:ArcCenter - Attribute "center_point" is not initialized. + Attribute "%1" is not initialized. Center point is not defined SketchArc:ArcEndPoint - Attribute "ArcEndPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select an end point SketchArc:ArcPassedPoint - Attribute "ArcPassedPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select an intermediate point SketchArc:ArcStartPoint - Attribute "ArcStartPoint" is locked by modification value in the viewer. + Attribute "%1" is locked by modification value in the viewer. Select a start point @@ -685,14 +909,14 @@ SketchArc:Model_FeatureValidator - Attribute "ArcEndPoint" is not initialized. + Attribute "%1" is not initialized. End point is not defined SketchArc:Model_FeatureValidator - Attribute "ArcPassedPoint" is not initialized. + Attribute "%1" is not initialized. Intermediate point is not defined @@ -720,35 +944,35 @@ SketchArc:Model_FeatureValidator - Attribute "center_point" is not initialized. + Attribute "%1" is not initialized. Select an arc center SketchArc:Model_FeatureValidator:ArcStartPoint - Attribute "start_point" is not initialized. + Attribute "%1" is not initialized. Select an arc start point SketchArc:Model_FeatureValidator - Attribute "end_point" is not initialized. + Attribute "%1" is not initialized. Select an arc end point SketchArc:Model_FeatureValidator - Attribute "ArcPassedPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc passed point SketchArc:Model_FeatureValidator - Attribute "ArcTangentPoint" is not initialized. + Attribute "%1" is not initialized. Select an arc tangent point @@ -762,14 +986,14 @@ SketchConstraintMirror:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Mirror line is not selected SketchConstraintMirror:Model_FeatureValidator - Attribute "ConstraintMirrorList" is not initialized. + Attribute "%1" is not initialized. Objects for mirror are not selected @@ -819,14 +1043,14 @@ SketchMultiRotation:Model_FeatureValidator - Attribute "AngleType" is not initialized. + Attribute "%1" is not initialized. Type of angle is not defined SketchMultiRotation:Model_FeatureValidator - Attribute "MultiRotationCenter" is not initialized. + Attribute "%1" is not initialized. Rotation center is not selected @@ -868,21 +1092,21 @@ SketchMultiRotation:Model_FeatureValidator - Attribute "MultiRotationList" is not initialized. + Attribute "%1" is not initialized. Select objects to rotate SketchMultiRotation:Model_FeatureValidator - Attribute "MultiRotationAngle" is not initialized. + Attribute "%1" is not initialized. Set rotation angle SketchMultiRotation:Model_FeatureValidator - Attribute "MultiRotationObjects" is not initialized. + Attribute "%1" is not initialized. Set the number of resulting objects @@ -946,14 +1170,14 @@ SketchMultiTranslation:Model_FeatureValidator - Attribute "MultiTranslationEndPoint" is not initialized. + Attribute "%1" is not initialized. End point of translation vector is not defined SketchMultiTranslation:Model_FeatureValidator - Attribute "MultiTranslationList" is not initialized. + Attribute "%1" is not initialized. Objects for translation are not selected @@ -1004,14 +1228,14 @@ SketchMultiTranslation:Model_FeatureValidator - Attribute "MultiTranslationStartPoint" is not initialized. + Attribute "%1" is not initialized. Select a start point SketchMultiTranslation:Model_FeatureValidator - Attribute "MultiTranslationObjects" is not initialized. + Attribute "%1" is not initialized. Select a total number of objects @@ -1159,28 +1383,28 @@ SketchConstraintAngle:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintAngle:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected SketchConstraintAngle:Model_FeatureValidator - Attribute "AngleValue" is not initialized. + Attribute "%1" is not initialized. Set the angle value SketchConstraintAngle:Model_FeatureValidator - Attribute "AngleType" is not initialized. + Attribute "%1" is not initialized. Type of angle is not set @@ -1280,27 +1504,27 @@ SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + Different objects should be selected SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + Different objects should be selected SketchConstraintCoincidence:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintCoincidence:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected @@ -1350,14 +1574,14 @@ SketchConstraintDistance:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintDistance:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected @@ -1385,21 +1609,21 @@ SketchConstraintDistance:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintDistance:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected SketchConstraintDistance:Model_FeatureValidator - Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the distance @@ -1506,14 +1730,14 @@ SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + Different objects should be selected SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + Different objects should be selected @@ -1522,18 +1746,26 @@ An empty object is used. An empty object is used + + The %1 feature is not supported by the Equal constraint. + The %1 feature is not supported by the Equal constraint. + + + Features with kinds %1 and %2 can not be equal. + Features with kinds %1 and %2 can not be equal. + SketchConstraintEqual:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintEqual:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected @@ -1576,7 +1808,7 @@ SketchConstraintLength:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected @@ -1605,14 +1837,14 @@ SketchConstraintLength:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Line is not selected SketchConstraintLength:Model_FeatureValidator - Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the length value @@ -1663,14 +1895,14 @@ SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + Different objects should be selected SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + Different objects should be selected @@ -1683,14 +1915,14 @@ SketchConstraintMiddle:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintMiddle:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected @@ -1726,14 +1958,14 @@ SketchConstraintParallel:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First line is not selected SketchConstraintParallel:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second line is not selected @@ -1846,7 +2078,7 @@ SketchConstraintRigid:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Object is not selected @@ -1897,14 +2129,25 @@ SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. - Diferent objects should be selected + Different objects should be selected SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. - Diferent objects should be selected + Different objects should be selected + + + + SketchConstraintTangent:ConstraintEntityA:SketchPlugin_TangentAttr + + Two segments cannot be tangent + Two segments cannot be tangent + + + Two B-splines cannot be tangent + Two B-splines cannot be tangent @@ -1917,14 +2160,14 @@ SketchConstraintTangent:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. First object is not selected SketchConstraintTangent:Model_FeatureValidator - Attribute "ConstraintEntityB" is not initialized. + Attribute "%1" is not initialized. Second object is not selected @@ -1968,14 +2211,14 @@ SketchFillet:Model_FeatureValidator - Attribute "ConstraintEntityA" is not initialized. + Attribute "%1" is not initialized. Select one or several points for filet SketchFillet:Model_FeatureValidator - Attribute "ConstraintValue" is not initialized. + Attribute "%1" is not initialized. Set the fillet radius @@ -1989,8 +2232,8 @@ SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator - Error: one of the selected point does not have coicidence. - One of the selected point does not have coicidence + Error: one of the selected point does not have coincidence. + One of the selected point does not have coincidence @@ -2014,34 +2257,228 @@ Edges in selected point has tangent constraint - + - SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + SketchProjection - The attribute with the %1 type is not processed - An argument of type %1 of the projection feature is not supported + Project feature onto sketch plane + Project feature onto sketch plane + + + Projection + Projection - SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + SketchProjection:ExternalFeature + + Attribute "%1" is not initialized. + Select external edge or vertex. + + + Object + Object + - The attribute %1 should be an edge - The projected item must be an edge + Select external edge or vertex. + Select external edge or vertex. + + + + SketchProjection:IncludeToResult + + Include into the sketch result + Include into the sketch result + + + Include projected feature into the sketch result + Include projected feature into the sketch result + + + + SketchProjection:keep_reference + + A sketch entity will be created without connection to the selected shape. + A sketch entity will be created without connection to the selected shape. + + + The reference to the original curve is stored. So it can be changed later. + The reference to the original curve is stored. So it can be changed later. + + + + SketchProjection:make_fixed + + Assign the Fixed constraint to the result of projection + Assign the Fixed constraint to the result of projection + + + Make projected curve fixed + Make projected curve fixed SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute with the %1 type is not processed + An argument of type %1 of the projection feature is not supported + + + The attribute %1 should be an edge or vertex + The projected item must be an edge or a vertex + There is no sketch referring to the current feature The projection feature has no sketch + + Unable to project feature from the same sketch + Feature from the current sketch cannot be projected + + + Error: Line is orthogonal to the sketch plane. + Error: Line is orthogonal to the sketch plane. + + + Error: Circle is orthogonal to the sketch plane. + Error: Circle is orthogonal to the sketch plane. + + + Error: Arc is orthogonal to the sketch plane. + Error: Arc is orthogonal to the sketch plane. + + + Error: Ellipse is orthogonal to the sketch plane. + Error: Ellipse is orthogonal to the sketch plane. + + + Error: Elliptic Arc is orthogonal to the sketch plane. + Error: Elliptic Arc is orthogonal to the sketch plane. + + + Error: Periodic B-spline is orthogonal to the sketch plane. + Error: Periodic B-spline is orthogonal to the sketch plane. + + + Error: Selected object is not supported for projection. + Error: Selected object is not supported for projection. + - + + - SketchProjection:Model_FeatureValidator + SketchCurveFitting - Attribute "ExternalFeature" is not initialized. - + Curve fitting + Curve fitting + + + Create curve passing through the points + Create curve passing through the points + + + Error: Feature "%1" does not support action "%2". + Error: Feature "%1" does not support action "%2". + + + + SketchCurveFitting:SketchPlugin_CurveFittingValidator + + Not enough points selected. Need at least %1 points. + Not enough points selected. Need at least %1 points. + + SketchCurveFitting:points + + Points + Points + + + Select points for curve fitting + Select points for curve fitting + + + Attribute "%1" is not initialized. + Select points for interpolation + + + + SketchCurveFitting:periodic + + Periodic + Periodic + + + Make curve periodic + Make curve periodic + + + + SketchCurveFitting:closed + + Closed + Closed + + + Make curve closed, but not periodic + Make curve closed, but not periodic + + + + SketchCurveFitting:type + + Interpolation + Interpolation + + + Approximation + Approximation + + + + SketchCurveFitting:precision + + Precision + Precision + + + Maximal distance from selected points to the curve + Maximal distance from selected points to the curve + + + + SketchCurveFitting:need_control_poly + + Create control polygon + Create control polygon + + + Specify if the control polygon should be created + Specify if the control polygon should be created + + + + SketchCurveFitting:reorder_points + + Reorder points + Reorder points + + + Sort selected points to minimize the distance heighbors + Sort selected points to minimize the distance heighbors + + + + SketchCurveFitting:Auxiliary + + Auxiliary + Auxiliary + + + Construction element + Construction element + + +