X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSketchPlugin%2FSketchPlugin_msg_en.ts;h=1361cdc7919ed7eed4120bbcc8a647f307c438a3;hb=4a800cf754a8ba8485f5320ca1b4b6f308b622a7;hp=32b56ab36a2cddd6b9891fe5bd86df87d8e195a9;hpb=d0e479afb535cd9d6542d53302428a5c8e99485f;p=modules%2Fshaper.git diff --git a/src/SketchPlugin/SketchPlugin_msg_en.ts b/src/SketchPlugin/SketchPlugin_msg_en.ts index 32b56ab36..1361cdc79 100644 --- a/src/SketchPlugin/SketchPlugin_msg_en.ts +++ b/src/SketchPlugin/SketchPlugin_msg_en.ts @@ -1,187 +1,2484 @@ + + + workshop + + Curve fitting + Curve fitting + + + + + - Sketch + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "DirX" is not initialized. + Attribute "%1" is not initialized. Select a plane for the sketch + + + Sketch:Model_FeatureValidator - Model_FeatureValidator: Attribute "Features" is not initialized. + Attribute "%1" is not initialized. Sketch objects are not defined - - SketchCircle + Sketch:External:GeomValidators_Face + + The attribute with the %1 type is not processed + Only attribute selection can be used for the sketch face, not %1 + + + + Sketch:External:GeomValidators_Face + + The shape is not a face. + Sketch can be created only on a face + + + + Sketch:External:GeomValidators_Face + + The shape is not a plane. + Sketch can be created only on a planar face + + + + Sketch:External:GeomValidators_Face + + The shape is not a cylinder. + Sketch can be created only on a cylindrical face + + + + Sketch:External:GeomValidators_Face + + The shape is not an available face. + Sketch cannot be created on the selected face + + + + Sketch:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select the sketch plane + + + + Sketch:Model_FeatureValidator + + Attribute "%1" is not initialized. + Can not compute degrees of freedom + + + + Sketch:Model_FeatureValidator + + Attribute "%1" is not initialized. + Can not compute the solver error + + + + + SketchMacroCircle:center_point + + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + + Attribute "%1" is not initialized. + Select a point in the viewer + + + + SketchMacroCircle:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a point in the viewer + + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive - CircleRadius - GeomValidators_Positive: Double is not positive. - Radius value is not defined + Value is too small. + Radius value is too small + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "CircleCenter" is not initialized. + Attribute "%1" is not initialized. A center point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "FirstPoint" is not initialized. + Attribute "%1" is not initialized. A first point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "SecondPoint" is not initialized. + Attribute "%1" is not initialized. A second point is not selected + + + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ThirdPoint" is not initialized. + Attribute "%1" is not initialized. A third point is not selected + + + SketchMacroCircle:CircleCenter + + Attribute "circle_center" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:FirstPoint + + Attribute "FirstPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:SecondPoint + + Attribute "SecondPoint" is locked by modification value in the viewer. + Select a center point + + + + SketchMacroCircle:ThirdPoint - Attribute "CircleCenter" is locked by modification value in the viewer. + Attribute "ThirdPoint" is locked by modification value in the viewer. Select a center point + + + SketchMacroCircle:CircleRadius - Attribute "CircleRadius" is locked by modification value in the viewer. + Attribute "circle_radius" is locked by modification value in the viewer. Select a radius distance - - SketchConstraintHorizontal + SketchMacroCircle:CircleRadius:GeomValidators_Positive - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. - Line is not selected + Integer is not initialized. + Integer radius is not initialized + + + SketchMacroCircle:CircleRadius:GeomValidators_Positive - ModelAPI_StateInvalidArgument - Wrong object is selected + Integer is not positive. + Integer radius must be set - - SketchConstraintPerpendicular + SketchMacroCircle:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. - First line is not selected + Attribute "%1" is not initialized. + Set the circle radius + + + + SketchMacroArc:Model_FeatureValidator - Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized. - Select second line is not selected + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroArc:center_point + + Attribute "%1" is locked by modification value in the viewer. + Select a center point. + + + + SketchMacroArc:end_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + + SketchMacroArc:end_point_3 + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer. + + + Attribute "%1" is not initialized. + Select an end point in the viewer. + + + + SketchMacroArc:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select an passed point in the viewer. + + + + SketchMacroArc:start_point_1 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + SketchMacroArc:start_point_2 + + Attribute "%1" is locked by modification value in the viewer. + Select a start point. + + + + + SketchMacroEllipse:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. - - SketchConstraintRadius + SketchMacroEllipse:first_point - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. - Circle is nopt selected + Attribute "%1" is locked by modification value in the viewer. + Select a first point in the viewer. + + + + SketchMacroEllipse:passed_point + + Attribute "%1" is locked by modification value in the viewer. + Select a passed point. + + + + SketchMacroEllipse:second_point + + Attribute "%1" is locked by modification value in the viewer. + Select a second point. + + + + + SketchMacroEllipticArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a point. + + + + SketchMacroEllipticArc:center + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Attribute "%1" is not initialized. + Select a center point. + + + + SketchMacroEllipticArc:end_point + + Attribute "%1" is locked by modification value in the viewer. + Select an end point. + + + Attribute "%1" is not initialized. + Select an end point. + + + + SketchMacroEllipticArc:major_axis_point + + Attribute "%1" is locked by modification value in the viewer. + Select a major axis point. + + + Attribute "%1" is not initialized. + Select a major axis point. + + + + + SketchSplit:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a segment to split in the viewer. + + + + SketchSplit:SelectedObject:SketchPlugin_SplitValidator + + Select a segment to split in the viewer. + - SketchConstraintVertical + SketchConstraintHorizontal:Model_FeatureValidator + + Attribute "%1" is not initialized. + Line is not selected + + + + SketchConstraintHorizontal ModelAPI_StateInvalidArgument Wrong object is selected + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized. + The object is empty Line is not selected - - SketchLine + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - GeomValidators_Different: Attributes StartPoint and EndPoint are equal. - Start point and end point are the same + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1 + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Model_FeatureValidator: Attribute "EndPoint" is not initialized. - End point is not selected + It has reference to an empty attribute + The constraint argument refers to nothing + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Attribute "EndPoint" is locked by modification value in the viewer. - Select an end point in the viewer + Shape type is "%1", it should be "%2" + The constraint argument refers to %1 but must be %2 + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Attribute "StartPoint" is locked by modification value in the viewer. - Select a start point in the viewer + The attribute with the %1 type is not processed + The constraint argument of type %1 is not supported - - SketchPoint + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Model_FeatureValidator: Attribute "PointCoordindates" is not initialized. - Point is not defined + The result is empty + The constraint argument refers to not existing item + + + SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType - Attribute "PointCoordindates" is locked by modification value in the viewer. - Select a point + The shape is empty + The constraint argument refers to the empty shape - SketchRectangle + SketchConstraintPerpendicular:Model_FeatureValidator - GeomValidators_Different: Attributes RectStartPoint and RectEndPoint are equal. - Start point and end point must be different + Attribute "%1" is not initialized. + First line is not selected + + + SketchConstraintPerpendicular:Model_FeatureValidator - Attribute "RectEndPoint" is locked by modification value in the viewer. - Select a end point of the rectangle + Attribute "%1" is not initialized. + Second line is not selected + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - Attribute "RectStartPoint" is locked by modification value in the viewer. - Select a first point of the rectangle + The object is empty + First line is not selected - - SketchArc + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ArcRadius - GeomValidators_Positive: Double is not initialized. - Radius is not defined + The object is empty + Second line is not selected + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - ArcTangentPoint - SketchPlugin_ArcTangentPoint: The attribute ArcTangentPoint should be a point - + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The second line references to not acceptable shape type. The type should be: %1 + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - Attribute "ArcCenter" is locked by modification value in the viewer. - Select a center point + It has reference to an empty attribute + The second line refers to nothing + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - Attribute "ArcCenter" is not initialized. - Center point is not defined + Shape type is "%1", it should be "%2" + The second line refers to %1 but must be %2 + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - Attribute "ArcEndPoint" is locked by modification value in the viewer. - Select an end point + The attribute with the %1 type is not processed + The second line of type %1 is not supported + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - Attribute "ArcPassedPoint" is locked by modification value in the viewer. - Select an intermediate point + The result is empty + The second line refers to not existing item + + + SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType - Attribute "ArcStartPoint" is locked by modification value in the viewer. - Select a start point + The shape is empty + The second line refers to the empty shape + + + SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator - GeomValidators_Different: Attributes ArcCenter and ArcStartPoint are equal. - Center point and end point must be different + Both features, attribute and attribute in parameter, are external. + Two external lines can not be constrained as perpendicular + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - GeomValidators_Different: Attributes ArcStartPoint and ArcEndPoint are equal. - Start point and end point must be different + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - Model_FeatureValidator: Attribute "ArcEndPoint" is not initialized. - End point is not defined + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line shape type is "%1", it should be "%2" + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType - Model_FeatureValidator: Attribute "ArcPassedPoint" is not initialized. - Intermediate point is not defined + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Two external lines can not be constrained as perpendicular + + + + + SketchConstraintRadius:Model_FeatureValidator + + Attribute "%1" is not initialized. + Circle is not selected + + SketchConstraintRadius:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Radius value is not positive + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Value is too small. + Radius is too small + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Integer radius must be set + + + + SketchConstraintRadius:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer radius must be positive + + + + SketchConstraintRadius:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the radius + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The circle argument refers to nothing + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The circle argument shape type is "%1", it should be "%2" + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintVertical + + ModelAPI_StateInvalidArgument + Wrong object is selected + + + + SketchConstraintVertical:Model_FeatureValidator + + Attribute "%1" is not initialized. + Line is not selected + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Line is not selected + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The first line references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line refers to %1 but must be %2 + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The first line of type %1 is not supported + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The first line refers to not existing item + + + + SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The first line refers to the empty shape + + + + + SketchLine:GeomValidators_Different + + Attributes StartPoint and EndPoint are equal. + Start point and end point are the same + + + + SketchLine:Model_FeatureValidator + + Attribute "%1" is not initialized. + End point is not selected + + + + SketchLine:EndPoint + + Attribute "%1" is locked by modification value in the viewer. + Select an end point in the viewer + + + + SketchLine:StartPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a start point in the viewer + + + + SketchLine:StartPoint + + Attribute "%1" is not initialized. + Start point is not selected + + + + SketchLine:EndPoint + + Attribute "%1" is not initialized. + End point is not selected + + + + SketchLine:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a start point + + + + + SketchPoint:Model_FeatureValidator + + Attribute "%1" is not initialized. + Point is not defined + + + + SketchPoint:PointCoordinates + + Attribute "%1" is not initialized. + Select a point + + + + SketchPoint:PointCoordinates + + Attribute "%1" is locked by modification value in the viewer. + Select a point + + + + + SketchRectangle + + Create rectangle + Create rectangle + + + Rectangle + Rectangle + + + + SketchRectangle:Auxiliary + + Auxiliary + Auxiliary + + + Construction element + Construction element + + + + SketchRectangle:RectCenterPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Center + Center + + + + SketchRectangle:RectCornerPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a point. + + + Corner + Corner + + + + SketchRectangle:RectEndPoint + + Attribute "%1" is not initialized. + Select a point. + + + End point + End point + + + + SketchRectangle:RectStartPoint + + Attribute "%1" is not initialized. + Select a point. + + + Start point + Start point + + + + SketchRectangle:RectangleType + + Rectangle by center and corner + Rectangle by center and corner + + + Rectangle by corners + Rectangle by corners + + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Double is not initialized. + Radius value is not positive + + + + SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint + + The attribute ArcTangentPoint should be a point + Arc tangent point is not selected + + + + SketchArc:ArcCenter + + Attribute "%1" is locked by modification value in the viewer. + Select a center point + + + + SketchArc:ArcCenter + + Attribute "%1" is not initialized. + Center point is not defined + + + + SketchArc:ArcEndPoint + + Attribute "%1" is locked by modification value in the viewer. + Select an end point + + + + SketchArc:ArcPassedPoint + + Attribute "%1" is locked by modification value in the viewer. + Select an intermediate point + + + + SketchArc:ArcStartPoint + + Attribute "%1" is locked by modification value in the viewer. + Select a start point + + + + SketchArc:GeomValidators_Different + + Attributes ArcCenter and ArcStartPoint are equal. + Center point and end point must be different + + + + SketchArc:GeomValidators_Different + + Attributes ArcStartPoint and ArcEndPoint are equal. + Start point and end point must be different + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + End point is not defined + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Intermediate point is not defined + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Value is too small. + Arc radius is too small + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Integer is not initialized. + Integer arc radius must be set + + + + SketchArc:ArcRadius:GeomValidators_Positive + + Integer is not positive. + Integer arc radius must be positive + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select an arc center + + + + SketchArc:Model_FeatureValidator:ArcStartPoint + + Attribute "%1" is not initialized. + Select an arc start point + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select an arc end point + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select an arc passed point + + + + SketchArc:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select an arc tangent point + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Line is not selected + + + + SketchConstraintMirror:Model_FeatureValidator + + Attribute "%1" is not initialized. + Mirror line is not selected + + + + SketchConstraintMirror:Model_FeatureValidator + + Attribute "%1" is not initialized. + Objects for mirror are not selected + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The mirror line references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The mirror line refers to nothing + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The mirror line refers to %1 but must be %2 + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The mirror line of type %1 is not supported + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The mirror line refers to not existing item + + + + SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The mirror line refers to the empty shape + + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Type of angle is not defined + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Rotation center is not selected + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The object is empty + Rotation center is not selected + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Double is not initialized. + The total number of rotated objects is not set + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Value is too small. + The total number of rotated objects must be positive + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Integer is not initialized. + The total number of rotated objects is not set + + + + SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive + + Integer is not positive. + The total number of rotated objects must be positive + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select objects to rotate + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set rotation angle + + + + SketchMultiRotation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the number of resulting objects + + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator + + The object %1 is a result of copy + The object %1 is a result of copy and can not be rotated + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + It has reference to an empty attribute + The rotation center refers to nothing + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The rotation center shape type is "%1", it should be "%2" + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The result is empty + The rotation center refers to not existing item + + + + SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType + + The shape is empty + The rotation center refers to the empty shape + + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "%1" is not initialized. + End point of translation vector is not defined + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Objects for translation are not selected + + + + SketchMultiTranslation:GeomValidators_ShapeType + + The object is empty + End point of translation vector is not selected + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The object is empty + Start point of translation vector is not selected + + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Double is not initialized. + The total number of translated objects is not set + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Value is too small. + The total number of translated objects must be positive + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Integer is not initialized. + The total number of translated objects is not set + + + + SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive + + Integer is not positive. + The total number of translated objects must be positive + + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a start point + + + + SketchMultiTranslation:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select a total number of objects + + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator + + The object %1 is a result of copy + The object %1 is a result of copy and can not be translated + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + It has reference to an empty attribute + The translation start point refers to nothing + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The translation start point shape type is "%1", it should be "%2" + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The object is empty + Select a start point + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The result is empty + The start point refers to not existing item + + + + SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType + + The shape is empty + The start point refers to the empty shape + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + It has reference to an empty attribute + The translation end point refers to nothing + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The translation end point shape type is "%1", it should be "%2" + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The object is empty + Select an end point + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The result is empty + The end point refers to not existing item + + + + SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType + + The shape is empty + The end point refers to the empty shape + + + + + SketchConstraintAngle:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An angle can not be created between two external objects + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the angle value + + + + SketchConstraintAngle:Model_FeatureValidator + + Attribute "%1" is not initialized. + Type of angle is not set + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first object refers to nothing + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first object shape type is "%1", it should be "%2" + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Angle can not be created on two external entities + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second object refers to nothing + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second object shape type is "%1", it should be "%2" + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + + SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + + SketchConstraintCoincidence:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintCoincidence:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A coincidence can not be created between two external objects + + + + SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A coincidence can not be created between two external objects + + + + + SketchConstraintDistance:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Distance value must be set + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Value is too small. + Distance value is too small + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Integer distance value must be set + + + + SketchConstraintDistance:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer distance value must be positive + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintDistance:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the distance + + + + SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Distance can not be set between two external objects + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first object refers to nothing + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first object shape type is "%1", it should be "%2" + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + Distance can not be set between two external objects + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second object refers to nothing + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second object shape type is "%1", it should be "%2" + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + + SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr + + An empty object is used. + An empty object is used + + + The %1 feature is not supported by the Equal constraint. + The %1 feature is not supported by the Equal constraint. + + + Features with kinds %1 and %2 can not be equal. + Features with kinds %1 and %2 can not be equal. + + + + SketchConstraintEqual:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintEqual:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An equality can not be set between two external objects + + + + SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + An equality can not be set between two external objects + + + + + SketchConstraintLength:ConstraintFlyoutValuePnt + + Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer. + Flyout value point is not clicked in the viewer + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Set the length value + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "%1" is not initialized. + Line is not selected + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Value is too small. + Length value is too small + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Set the integer length value + + + + SketchConstraintLength:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + Integer length value is not positive + + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "%1" is not initialized. + Line is not selected + + + + SketchConstraintLength:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the length value + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The line refers to nothing + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The line shape type is "%1", it should be "%2" + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + + SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr + + Middle point constraint allows points and lines only + Not point or line is selected + + + + SketchConstraintMiddle:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintMiddle:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A middle can not be set for two external objects + + + + SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A middle can not be set for two external objects + + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + First object is not selected + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The object is empty + Second object is not selected + + + + SketchConstraintParallel:Model_FeatureValidator + + Attribute "%1" is not initialized. + First line is not selected + + + + SketchConstraintParallel:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second line is not selected + + + + SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A parallel can not be set between two external objects + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The first line refers to nothing + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The first line shape type is "%1", it should be "%2" + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator + + Both features, attribute and attribute in parameter, are external. + A parallel can not be set between two external objects + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + Shape type must be %1 + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + It has reference to an empty attribute + The second line refers to nothing + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The second line shape type is "%1", it should be "%2" + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The attribute with the %1 type is not processed + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The result is empty + The constraint argument refers to not existing item + + + + SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType + + The shape is empty + The constraint argument refers to the empty shape + + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The object is empty + Object is not selected + + + + SketchConstraintRigid:Model_FeatureValidator + + Attribute "%1" is not initialized. + Object is not selected + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + It does not contain element with acceptable shape type. The type should be one of the next: %1 + The fixed constraint references to not acceptable shape type. The type should be: %1 + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + It has reference to an empty attribute + The fixed constraint refers to nothing + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + Shape type is "%1", it should be "%2" + The fixed constraint refers to %1 but must be %2 + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The attribute with the %1 type is not processed + The fixed constraint of type %1 is not supported + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The result is empty + The fixed constraint refers to not existing item + + + + SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType + + The shape is empty + The fixed constraint refers to the empty shape + + + + + SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes. + Different objects should be selected + + + + SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects + + The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes. + Different objects should be selected + + + + SketchConstraintTangent:ConstraintEntityA:SketchPlugin_TangentAttr + + Two segments cannot be tangent + Two segments cannot be tangent + + + Two B-splines cannot be tangent + Two B-splines cannot be tangent + + + + SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr + + It uses an empty object + Selection is not valid + + + + SketchConstraintTangent:Model_FeatureValidator + + Attribute "%1" is not initialized. + First object is not selected + + + + SketchConstraintTangent:Model_FeatureValidator + + Attribute "%1" is not initialized. + Second object is not selected + + + + + SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator + + The attribute with the %1 type is not processed + Only attribute selection can be used for the sketch face, not %1 + + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Double is not initialized. + Set the fillet radius + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Value is too small. + The fillet radius must be positive + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Integer is not initialized. + Set the integer fillet radius + + + + SketchFillet:ConstraintValue:GeomValidators_Positive + + Integer is not positive. + The integer fillet radius must be positive + + + + SketchFillet:Model_FeatureValidator + + Attribute "%1" is not initialized. + Select one or several points for filet + + + + SketchFillet:Model_FeatureValidator + + Attribute "%1" is not initialized. + Set the fillet radius + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: List of points is empty. + List of points is empty + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: one of the selected point does not have coincidence. + One of the selected point does not have coincidence + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: One of the selected points does not have two suitable edges for fillet. + One of the selected points does not have two suitable edges for fillet + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: Edges in selected point has tangent constraint. + Edges in selected point has tangent constraint + + + + SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator + + Error: Edges in selected point has tangent constraint. + Edges in selected point has tangent constraint + + + + + SketchProjection + + Project feature onto sketch plane + Project feature onto sketch plane + + + Projection + Projection + + + + SketchProjection:ExternalFeature + + Attribute "%1" is not initialized. + Select external edge or vertex. + + + Object + Object + + + Select external edge or vertex. + Select external edge or vertex. + + + + SketchProjection:IncludeToResult + + Include into the sketch result + Include into the sketch result + + + Include projected feature into the sketch result + Include projected feature into the sketch result + + + + SketchProjection:keep_reference + + A sketch entity will be created without connection to the selected shape. + A sketch entity will be created without connection to the selected shape. + + + The reference to the original curve is stored. So it can be changed later. + The reference to the original curve is stored. So it can be changed later. + + + + SketchProjection:make_fixed + + Assign the Fixed constraint to the result of projection + Assign the Fixed constraint to the result of projection + + + Make projected curve fixed + Make projected curve fixed + + + + SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator + + The attribute with the %1 type is not processed + An argument of type %1 of the projection feature is not supported + + + The attribute %1 should be an edge or vertex + The projected item must be an edge or a vertex + + + There is no sketch referring to the current feature + The projection feature has no sketch + + + Unable to project feature from the same sketch + Feature from the current sketch cannot be projected + + + Error: Line is orthogonal to the sketch plane. + Error: Line is orthogonal to the sketch plane. + + + Error: Circle is orthogonal to the sketch plane. + Error: Circle is orthogonal to the sketch plane. + + + Error: Arc is orthogonal to the sketch plane. + Error: Arc is orthogonal to the sketch plane. + + + Error: Ellipse is orthogonal to the sketch plane. + Error: Ellipse is orthogonal to the sketch plane. + + + Error: Elliptic Arc is orthogonal to the sketch plane. + Error: Elliptic Arc is orthogonal to the sketch plane. + + + Error: Periodic B-spline is orthogonal to the sketch plane. + Error: Periodic B-spline is orthogonal to the sketch plane. + + + Error: Selected object is not supported for projection. + Error: Selected object is not supported for projection. + + + + + + SketchCurveFitting + + Curve fitting + Curve fitting + + + Create curve passing through the points + Create curve passing through the points + + + Error: Feature "%1" does not support action "%2". + Error: Feature "%1" does not support action "%2". + + + + SketchCurveFitting:SketchPlugin_CurveFittingValidator + + Not enough points selected. Need at least %1 points. + Not enough points selected. Need at least %1 points. + + + + SketchCurveFitting:points + + Points + Points + + + Select points for curve fitting + Select points for curve fitting + + + Attribute "%1" is not initialized. + Select points for interpolation + + + + SketchCurveFitting:periodic + + Periodic + Periodic + + + Make curve periodic + Make curve periodic + + + + SketchCurveFitting:closed + + Closed + Closed + + + Make curve closed, but not periodic + Make curve closed, but not periodic + + + + SketchCurveFitting:type + + Interpolation + Interpolation + + + Approximation + Approximation + + + + SketchCurveFitting:precision + + Precision + Precision + + + Maximal distance from selected points to the curve + Maximal distance from selected points to the curve + + + + SketchCurveFitting:need_control_poly + + Create control polygon + Create control polygon + + + Specify if the control polygon should be created + Specify if the control polygon should be created + + + + SketchCurveFitting:reorder_points + + Reorder points + Reorder points + + + Sort selected points to minimize the distance heighbors + Sort selected points to minimize the distance heighbors + + + + SketchCurveFitting:Auxiliary + + Auxiliary + Auxiliary + + + Construction element + Construction element + + +