X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FSMESH_SWIG%2FSMESH_controls.py;h=d081611f92cff71cc6246c1bb981909d31f23c0e;hb=ff873c8b10f4cc15316f4ee7e1331ec1b4e0c1ab;hp=7cc0f0eccd59475fc974529ab33ad406b4cec2dd;hpb=7a65c9fad427b1ccba6b9ccae612296e5092a324;p=modules%2Fsmesh.git

diff --git a/src/SMESH_SWIG/SMESH_controls.py b/src/SMESH_SWIG/SMESH_controls.py
index 7cc0f0ecc..d081611f9 100644
--- a/src/SMESH_SWIG/SMESH_controls.py
+++ b/src/SMESH_SWIG/SMESH_controls.py
@@ -1,5 +1,5 @@
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2021  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -30,7 +30,7 @@ import SMESH_mechanic
 
 import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
-smesh =  smeshBuilder.New(salome.myStudy)
+smesh =  smeshBuilder.New()
 mesh = SMESH_mechanic.mesh
 
 # ---- Criterion : AREA > 100
@@ -40,7 +40,7 @@ aGroup = mesh.MakeGroup("Area > 100", SMESH.FACE, SMESH.FT_Area, SMESH.FT_MoreTh
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Area > 100 Nb = ", len( anIds )
+print("Criterion: Area > 100 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -52,7 +52,7 @@ aGroup = mesh.MakeGroup("Taper > 3e-15", SMESH.FACE, SMESH.FT_Taper, SMESH.FT_Mo
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Taper > 3e-15 Nb = ", len( anIds )
+print("Criterion: Taper > 3e-15 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -64,7 +64,7 @@ aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", SMESH.FACE, SMESH.FT_AspectRatio,
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds )
+print("Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -76,7 +76,7 @@ aGroup = mesh.MakeGroup("Minimum Angle < 30", SMESH.FACE, SMESH.FT_MinimumAngle,
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Minimum Angle < 30 Nb = ", len( anIds )
+print("Criterion: Minimum Angle < 30 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -88,7 +88,7 @@ aGroup = mesh.MakeGroup("Warp > 2e-13", SMESH.FACE, SMESH.FT_Warping, SMESH.FT_M
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Warp > 2e-13 Nb = ", len( anIds )
+print("Criterion: Warp > 2e-13 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -100,7 +100,7 @@ aGroup = mesh.MakeGroup("Skew > 18", SMESH.FACE, SMESH.FT_Skew, SMESH.FT_MoreTha
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Skew > 18 Nb = ", len( anIds )
+print("Criterion: Skew > 18 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -112,7 +112,7 @@ aGroup = mesh.MakeGroup("Length > 10", SMESH.FACE, SMESH.FT_Length, SMESH.FT_Mor
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Length > 10 Nb = ", len( anIds )
+print("Criterion: Length > 10 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -124,7 +124,7 @@ aGroup = mesh.MakeGroup("Borders at multi-connections = 2", SMESH.EDGE, SMESH.FT
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Borders at multi-connections = 2 Nb = ", len( anIds )
+print("Criterion: Borders at multi-connections = 2 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
@@ -136,9 +136,9 @@ aGroup = mesh.MakeGroup("Element Diameter 2D > 10", SMESH.FACE, SMESH.FT_MaxElem
 
 # print result
 anIds = aGroup.GetIDs()
-print "Criterion: Element Diameter 2D > 10 Nb = ", len( anIds )
+print("Criterion: Element Diameter 2D > 10 Nb = ", len( anIds ))
 #for i in range( len( anIds ) ):
   #print anIds[ i ]
 
 
-salome.sg.updateObjBrowser(1)
+salome.sg.updateObjBrowser()