X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FHYDROGUI%2FHYDROGUI_ProfileOp.cxx;h=c4c822df57515a5a9fdb4461e27b74928da49049;hb=6dd1807886655d96b021fbfb6ba736d79d49a492;hp=a9a9cf2cdeb0a2280f2744e85ed1fe1c3ad9af33;hpb=1c6465288cda49e75392724ddc01aba7cfe4ef68;p=modules%2Fhydro.git

diff --git a/src/HYDROGUI/HYDROGUI_ProfileOp.cxx b/src/HYDROGUI/HYDROGUI_ProfileOp.cxx
index a9a9cf2c..c4c822df 100644
--- a/src/HYDROGUI/HYDROGUI_ProfileOp.cxx
+++ b/src/HYDROGUI/HYDROGUI_ProfileOp.cxx
@@ -1,12 +1,8 @@
-// Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015  EDF-R&D
 // This library is free software; you can redistribute it and/or
 // modify it under the terms of the GNU Lesser General Public
 // License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
 //
 // This library is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -19,16 +15,17 @@
 //
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-#include "HYDROGUI_Module.h"
-#include "HYDROGUI_ProfileOp.h"
-#include "HYDROGUI_ProfileDlg.h"
-#include "HYDROGUI_Tool.h"
-#include "HYDROGUI_UpdateFlags.h"
 
-#include "HYDROData_Document.h"
-#include "HYDROData_Profile.h"
-#include "CurveCreator_Profile.hxx"
-#include "CurveCreator_Displayer.h"
+#include <HYDROGUI_Module.h>
+#include <HYDROGUI_ProfileOp.h>
+#include <HYDROGUI_ProfileDlg.h>
+#include <HYDROGUI_Tool.h>
+#include <HYDROGUI_UpdateFlags.h>
+#include <HYDROGUI_DataObject.h>
+#include <HYDROData_Document.h>
+#include <HYDROData_Profile.h>
+#include <HYDROGUI_CurveCreatorProfile.h>
+#include <CurveCreator_Displayer.hxx>
 
 #include <LightApp_Application.h>
 #include <LightApp_SelectionMgr.h>
@@ -78,36 +75,52 @@ void HYDROGUI_ProfileOp::startOperation()
   if( myProfile )
     delete myProfile;
 
-  myProfile = new CurveCreator_Profile();
+  myProfile = new HYDROGUI_CurveCreatorProfile();
 
   HYDROGUI_Operation::startOperation();
 
   HYDROGUI_ProfileDlg* aPanel = (HYDROGUI_ProfileDlg*)inputPanel();
   aPanel->reset();
+  setPreviewManager( aPanel->viewManager() );
+  setCursor();
 
   if( myIsEdit )
-    myEditedObject = Handle(HYDROData_Profile)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
+    if ( isApplyAndClose() )
+      myEditedObject = Handle(HYDROData_Profile)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
 
   QString aProfileName;
   if( !myEditedObject.IsNull() )
   {
-    CurveCreator::Coordinates aCurveCoords;
-    CurveCreator::SectionsMap aSectionsMap;
-
-    HYDROData_ProfileUZ::PointsList aSectPointsList = myEditedObject->GetParametricPoints();
-    CurveCreator::PosPointsList aPoints;
-    for ( int k = 1, aNbPoints = aSectPointsList.Size(); k <= aNbPoints; ++k )
+    Handle(HYDROData_ProfileUZ) aProfileUZ = myEditedObject->GetProfileUZ( false );
+    if ( !aProfileUZ.IsNull() )
     {
-      const HYDROData_ProfileUZ::Point& aSectPoint = aSectPointsList.Value( k );
-      aCurveCoords.clear();
-      aCurveCoords.push_back( aSectPoint.X() );
-      aCurveCoords.push_back( aSectPoint.Y() );
+      CurveCreator::Coordinates aCurveCoords;
+      CurveCreator::SectionsMap aSectionsMap;
+
+      HYDROData_ProfileUZ::PointsList aSectPointsList = aProfileUZ->GetPoints();
+      CurveCreator::PosPointsList aPoints;
+      for ( int k = 1, aNbPoints = aSectPointsList.Size(); k <= aNbPoints; ++k )
+      {
+        const HYDROData_ProfileUZ::Point& aSectPoint = aSectPointsList.Value( k );
+        aCurveCoords.clear();
+        aCurveCoords.push_back( aSectPoint.X() );
+        aCurveCoords.push_back( aSectPoint.Y() );
+
+        CurveCreator_PosPoint* aPosPoint = new CurveCreator_PosPoint( k, aCurveCoords );
+        aPoints.push_back( aPosPoint );
+      }
 
-      CurveCreator_PosPoint* aPosPoint = new CurveCreator_PosPoint( k, aCurveCoords );
-      aPoints.push_back( aPosPoint );
+      aSectionsMap[0] = aPoints;
+      myProfile->addPointsInternal( aSectionsMap );
+
+      HYDROData_ProfileUZ::SectionType aSectType = aProfileUZ->GetSectionType( 0 );
+
+      CurveCreator::SectionType aCurveType = CurveCreator::Polyline;
+      if( aSectType == HYDROData_ProfileUZ::SECTION_SPLINE )
+        aCurveType = CurveCreator::Spline;
+
+      myProfile->setSectionType( 0, aCurveType );
     }
-    aSectionsMap[0] = aPoints;
-    myProfile->addPointsInternal( aSectionsMap );
 
     aProfileName = myEditedObject->GetName();
   }
@@ -124,6 +137,7 @@ void HYDROGUI_ProfileOp::startOperation()
 void HYDROGUI_ProfileOp::abortOperation()
 {
   erasePreview();
+  restoreCursor();
 
   HYDROGUI_Operation::abortOperation();
 }
@@ -131,6 +145,7 @@ void HYDROGUI_ProfileOp::abortOperation()
 void HYDROGUI_ProfileOp::commitOperation()
 {
   erasePreview();
+  restoreCursor();
 
   HYDROGUI_Operation::commitOperation();
 }
@@ -142,7 +157,8 @@ HYDROGUI_InputPanel* HYDROGUI_ProfileOp::createInputPanel() const
 }
 
 bool HYDROGUI_ProfileOp::processApply( int& theUpdateFlags,
-                                        QString& theErrorMsg )
+                                       QString& theErrorMsg,
+                                       QStringList& theBrowseObjectsEntries )
 {
   HYDROGUI_ProfileDlg* aPanel = ::qobject_cast<HYDROGUI_ProfileDlg*>( inputPanel() );
   if ( !aPanel )
@@ -177,6 +193,10 @@ bool HYDROGUI_ProfileOp::processApply( int& theUpdateFlags,
   if( aProfileObj.IsNull() )
     return false;
 
+  Handle(HYDROData_ProfileUZ) aProfileUZ = aProfileObj->GetProfileUZ();
+  if ( aProfileUZ.IsNull() )
+    return false;
+
   aProfileObj->SetName(aProfileName);
 
   HYDROData_ProfileUZ::PointsList aProfileParamPoints;
@@ -200,9 +220,34 @@ bool HYDROGUI_ProfileOp::processApply( int& theUpdateFlags,
   }
   aProfileObj->SetParametricPoints( aProfileParamPoints );
 
+  HYDROData_ProfileUZ::SectionType aSectType = HYDROData_ProfileUZ::SECTION_POLYLINE;
+  if ( myProfile->getSectionType( 0 ) == CurveCreator::Spline )
+    aSectType = HYDROData_ProfileUZ::SECTION_SPLINE;
+
+  aProfileUZ->SetSectionType( 0, aSectType );
+
+  if ( !myIsEdit )
+  {
+    aProfileObj->SetBorderColor( aProfileObj->DefaultBorderColor() );
+  }
+
+  // At first we update the child u,z profile object
+  aProfileUZ->Changed( HYDROData_Entity::Geom_2d );
+  aProfileUZ->Update();
+
+  // And now we update our edited object
   aProfileObj->Update();
+  module()->setIsToUpdate( aProfileObj );
 
   theUpdateFlags = UF_Model;
+  if ( myIsEdit )
+    theUpdateFlags |= UF_OCCViewer | UF_OCC_Forced | UF_VTKViewer;
+  else
+  {
+    QString anEntry = HYDROGUI_DataObject::dataObjectEntry( aProfileObj );
+    theBrowseObjectsEntries.append( anEntry );
+  }
+
   return true;
 }