X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=src%2FGEOMGUI%2FGeometryGUI.cxx;h=f94d3902d8c10921d60dcc65205651e5bdcdd0f6;hb=2dbe613765884256942925d8a95293e3c473caec;hp=6987b1d2a16f00529388789677da4d218ea14e77;hpb=ca429d817a18d6acc571443f6a596575dee03c2f;p=modules%2Fgeom.git diff --git a/src/GEOMGUI/GeometryGUI.cxx b/src/GEOMGUI/GeometryGUI.cxx index 6987b1d2a..f94d3902d 100644 --- a/src/GEOMGUI/GeometryGUI.cxx +++ b/src/GEOMGUI/GeometryGUI.cxx @@ -1,136 +1,134 @@ -// GEOM GEOMGUI : GUI for Geometry component +// GEOM GEOMGUI : GUI for Geometry component // -// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS // -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. // -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. // -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // +// File : GeometryGUI.cxx +// Author : Vadim SANDLER, Open CASCADE S.A.S. (vadim.sandler@opencascade.com) // -// -// File : GeometryGUI.cxx -// Author : Lucien PIGNOLONI -// Module : GEOM -// $Header$ #include "GeometryGUI.h" - -// SALOME Includes -#include "Utils_ORB_INIT.hxx" -#include "Utils_SINGLETON.hxx" - -#include "QAD_Desktop.h" -#include "QAD_Application.h" -#include "QAD_RightFrame.h" -#include "QAD_Config.h" -#include "QAD_Tools.h" -#include "QAD_MessageBox.h" -#include "QAD_Resource.h" -#include "SALOMEGUI_Desktop.h" - -#include "OCCViewer_Viewer3d.h" -#include "OCCViewer_ViewFrame.h" -#include "OCCViewer_ViewPort3d.h" -#include "OCCViewer_Prs.h" - -#include "VTKViewer_ViewFrame.h" -#include "VTKViewer_RenderWindowInteractor.h" -#include "VTKViewer_InteractorStyleSALOME.h" -#include "VTKViewer_Prs.h" -#include "SALOME_Actor.h" - -#include "SALOME_Selection.h" -#include "SALOME_ListIteratorOfListIO.hxx" -#include "GEOM_AISShape.hxx" +#include "GEOMGUI_OCCSelector.h" +#include "GEOMGUI_Selection.h" #include "GEOM_Displayer.h" -#include "GEOMImpl_Types.hxx" +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include // External includes -#include +#include +#include +#include +#include + #include #include +#include #include -#include "utilities.h" +#include #include #include -using namespace std; +using namespace Qt; extern "C" { - Standard_EXPORT SALOMEGUI* GetComponentGUI() { - return GeometryGUI::GetGeomGUI(); + Standard_EXPORT CAM_Module* createModule() { + return new GeometryGUI(); } } -//================================================================================= -// class : CustomItem -// purpose : Set Font to a text. -//================================================================================= -class CustomItem : public QCustomMenuItem -{ -public: - CustomItem(const QString& s, const QFont& f) : myString(s), myFont(f) {} - ~CustomItem() {} - void paint(QPainter* p, const QColorGroup& cg, bool act, bool /*enabled*/, int x, int y, int w, int h) - { - p->save(); - p->fillRect( x, y, w, h, act ? cg.highlight() : cg.mid() ); - p->setPen( act ? cg.highlightedText() : cg.buttonText() ); - p->setFont( myFont ); - p->drawText( x, y, w, h, AlignHCenter | AlignVCenter | ShowPrefix | DontClip | SingleLine, myString ); - p->restore(); - } - QSize sizeHint() - { - return QFontMetrics( myFont ).size( AlignHCenter | AlignVCenter | ShowPrefix | DontClip | SingleLine, myString ); - } +GEOM::GEOM_Gen_var GeometryGUI::myComponentGeom = GEOM::GEOM_Gen::_nil(); - bool fullSpan() const - { - return true; - } +GEOM::GEOM_Gen_var GeometryGUI::GetGeomGen() +{ + // Bug 12290: exception in Mesh GUI on GEOMBase::GetShape() if Geometry GUI hasn't been loaded + if (CORBA::is_nil(myComponentGeom)) + InitGeomGen(); + return GeometryGUI::myComponentGeom; +} -private: - QString myString; - QFont myFont; -}; +bool GeometryGUI::InitGeomGen() +{ + GeometryGUI aGG; + if( CORBA::is_nil( myComponentGeom ) ) return false; + return true; +} //======================================================================= -// function : GeometryGUI::GetGeomGUI() -// purpose : Gets the only object of GeometryGUI [ static ] +// function : ClientSObjectToObject +// purpose : //======================================================================= -GeometryGUI* GeometryGUI::GetGeomGUI() +CORBA::Object_var GeometryGUI::ClientSObjectToObject (_PTR(SObject) theSObject) { - static GeometryGUI myContext; - return &myContext; + _PTR(GenericAttribute) anAttr; + CORBA::Object_var anObj; + try { + std::string aValue = theSObject->GetIOR(); + if (strcmp(aValue.c_str(), "") != 0) { + CORBA::ORB_ptr anORB = SalomeApp_Application::orb(); + anObj = anORB->string_to_object(aValue.c_str()); + } + } catch(...) { + INFOS("ClientSObjectToObject - Unknown exception was occured!!!"); + } + return anObj._retn(); } //======================================================================= -// function : GetORB -// purpose : Returns a reference to ORB [ static ] +// function : ClientStudyToStudy +// purpose : //======================================================================= -CORBA::ORB_var GeometryGUI::GetORB() +SALOMEDS::Study_var GeometryGUI::ClientStudyToStudy (_PTR(Study) theStudy) { - ORB_INIT& init = *SINGLETON_::Instance(); - return init.orb(); + SALOME_NamingService *aNamingService = SalomeApp_Application::namingService(); + CORBA::Object_var aSMObject = aNamingService->Resolve("/myStudyManager"); + SALOMEDS::StudyManager_var aStudyManager = SALOMEDS::StudyManager::_narrow(aSMObject); + int aStudyID = theStudy->StudyId(); + SALOMEDS::Study_var aDSStudy = aStudyManager->GetStudyByID(aStudyID); + return aDSStudy._retn(); } //======================================================================= @@ -138,12 +136,15 @@ CORBA::ORB_var GeometryGUI::GetORB() // purpose : Constructor //======================================================================= GeometryGUI::GeometryGUI() : - SALOMEGUI() + SalomeApp_Module( "GEOM" ) { - QAD_Desktop* desktop = QAD_Application::getDesktop(); - Engines::Component_var comp = desktop->getEngine( "FactoryServer", "GEOM" ); + if ( CORBA::is_nil( myComponentGeom ) ) + { + SALOME_LifeCycleCORBA* ls = new SALOME_LifeCycleCORBA( getApp()->namingService() ); + Engines::Component_var comp = ls->FindOrLoad_Component( "FactoryServer", "GEOM" ); + myComponentGeom = GEOM::GEOM_Gen::_narrow( comp ); + } - myComponentGeom = GEOM::GEOM_Gen::_narrow( comp ); myState = -1; myActiveDialogBox = 0; myFatherior = ""; @@ -151,6 +152,9 @@ GeometryGUI::GeometryGUI() : gp_Pnt origin = gp_Pnt(0., 0., 0.); gp_Dir direction = gp_Dir(0., 0., 1.); myWorkingPlane = gp_Ax3(origin, direction); + + myDisplayer = 0; + myLocalSelectionMode = GEOM_ALLOBJECTS; } //======================================================================= @@ -159,25 +163,37 @@ GeometryGUI::GeometryGUI() : //======================================================================= GeometryGUI::~GeometryGUI() { + while (!myOCCSelectors.isEmpty()) + delete myOCCSelectors.takeFirst(); + + while (!myVTKSelectors.isEmpty()) + delete myVTKSelectors.takeFirst(); } //======================================================================= // function : GeometryGUI::getLibrary() // purpose : get or load GUI library by name [ internal ] //======================================================================= -typedef GEOMGUI* (*LibraryGUI)(); +typedef GEOMGUI* (*LibraryGUI)( GeometryGUI* ); GEOMGUI* GeometryGUI::getLibrary( const QString& libraryName ) { if ( !myGUIMap.contains( libraryName ) ) { // try to load library if it is not loaded yet - QCString libs; - if( ( libs = getenv( "LD_LIBRARY_PATH" ) ) ) { - QStringList dirList = QStringList::split( ":", libs, false ); // skip empty entries + QString libs; +#ifndef WNT + libs = getenv( "LD_LIBRARY_PATH" ); + if( !libs.isEmpty() ) { + QStringList dirList = libs.split( ":", QString::SkipEmptyParts ); // skip empty entries +#else + libs = getenv( "PATH" ); + if( !libs.isEmpty() ) { + QStringList dirList = libs.split( ";", QString::SkipEmptyParts ); // skip empty entries +#endif for( int i = dirList.count()-1; i >= 0; i-- ) { QString dir = dirList[ i ]; - QFileInfo fi( QAD_Tools::addSlash( dirList[ i ] ) + libraryName ); + QFileInfo fi( Qtx::addSlash( dirList[ i ] ) + libraryName ); if( fi.exists() ) { - OSD_SharedLibrary aSharedLibrary( (char*)fi.fileName().latin1() ); + OSD_SharedLibrary aSharedLibrary( fi.fileName().toLatin1().data() ); bool res = aSharedLibrary.DlOpen( OSD_RTLD_LAZY ); if( !res ) { MESSAGE( "Can't open library : " << aSharedLibrary.DlError() ); @@ -185,8 +201,8 @@ GEOMGUI* GeometryGUI::getLibrary( const QString& libraryName ) } OSD_Function osdF = aSharedLibrary.DlSymb( "GetLibGUI" ); if ( osdF != NULL ) { - LibraryGUI func = (GEOMGUI* (*) ())osdF; - GEOMGUI* libGUI = (*func)(); + LibraryGUI func = (GEOMGUI* (*) (GeometryGUI*))osdF; + GEOMGUI* libGUI = (*func)(this); if ( libGUI ) { myGUIMap[ libraryName ] = libGUI; break; // found and loaded! @@ -211,26 +227,33 @@ void GeometryGUI::ActiveWorkingPlane() gp_Dir DZ = myWorkingPlane.Direction(); gp_Dir DY = myWorkingPlane.YDirection(); - if( QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_OCC) { - OCCViewer_ViewPort* vp = ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewPort(); - Handle(V3d_View) view3d = ((OCCViewer_ViewPort3d*)vp)->getView(); + SUIT_ViewWindow* window = application()->desktop()->activeWindow(); + bool ViewOCC = ( window && window->getViewManager()->getType() == OCCViewer_Viewer::Type() ); + bool ViewVTK = ( window && window->getViewManager()->getType() == SVTK_Viewer::Type() ); - view3d->SetProj(DZ.X(), DZ.Y(), DZ.Z()); - view3d->SetUp(DY.X(), DY.Y(), DY.Z()); + if( ViewOCC ) { + OCCViewer_ViewWindow* vw = dynamic_cast( window ); + if ( vw ) { + Handle(V3d_View) view3d = vw->getViewPort()->getView(); - ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->onViewFitAll(); + view3d->SetProj(DZ.X(), DZ.Y(), DZ.Z()); + view3d->SetUp(DY.X(), DY.Y(), DY.Z()); + + vw->onViewFitAll(); + } } - else if( QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_VTK) { - vtkRenderer* myRenderer = ((VTKViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRenderer(); + else if( ViewVTK ) { + SVTK_ViewWindow* vw = dynamic_cast( window ); + if ( vw ) { + vtkCamera* camera = vw->getRenderer()->GetActiveCamera(); - vtkCamera* camera = myRenderer->GetActiveCamera(); - camera->SetPosition(DZ.X(), DZ.Y(), DZ.Z()); - camera->SetViewUp(DY.X(), DY.Y(), DY.Z()); - camera->SetFocalPoint(0,0,0); + camera->SetPosition(DZ.X(), DZ.Y(), DZ.Z()); + camera->SetViewUp(DY.X(), DY.Y(), DY.Z()); + camera->SetFocalPoint(0,0,0); - ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->onViewFitAll(); + vw->onFitAll(); + } } - } //======================================================================= @@ -272,173 +295,249 @@ void GeometryGUI::EmitSignalDefaultStepValueChanged(double newVal) //======================================================================= // function : GeometryGUI::OnGUIEvent() -// purpose : manage all events on GUI [static] +// purpose : common slot for all menu/toolbar actions //======================================================================= -bool GeometryGUI::OnGUIEvent(int theCommandID, QAD_Desktop* parent) +void GeometryGUI::OnGUIEvent() { - GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI(); + const QObject* obj = sender(); + if ( !obj || !obj->inherits( "QAction" ) ) + return; + int id = actionId((QAction*)obj); + if ( id != -1 ) + OnGUIEvent( id ); +} - // get main menu - QMenuBar* Mb = parent->getMainMenuBar(); - // check if current viewframe is of OCC type - bool ViewOCC = parent->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_OCC; +//======================================================================= +// function : GeometryGUI::OnGUIEvent() +// purpose : manage all events on GUI [static] +//======================================================================= +void GeometryGUI::OnGUIEvent( int id ) +{ + SUIT_Application* anApp = application(); + if (!anApp) return; + SUIT_Desktop* desk = anApp->desktop(); + + // check type of the active viewframe + SUIT_ViewWindow* window = desk->activeWindow(); + bool ViewOCC = ( window && window->getViewManager()->getType() == OCCViewer_Viewer::Type() ); + bool ViewVTK = ( window && window->getViewManager()->getType() == SVTK_Viewer::Type() ); // if current viewframe is not of OCC and not of VTK type - return immediately - if( !ViewOCC && parent->getActiveStudy()->getActiveStudyFrame()->getTypeView() != VIEW_VTK) - return false; - - // disable non-OCC viewframe menu commands - //Mb->setItemEnabled( 404, ViewOCC ); // SKETCHER - Mb->setItemEnabled( 603, ViewOCC ); // SuppressFace - Mb->setItemEnabled( 604, ViewOCC ); // SuppressHole - Mb->setItemEnabled( 606, ViewOCC ); // CloseContour - Mb->setItemEnabled( 607, ViewOCC ); // RemoveInternalWires - Mb->setItemEnabled( 608, ViewOCC ); // AddPointOnEdge - //Mb->setItemEnabled( 609, ViewOCC ); // Free boundaries - Mb->setItemEnabled( 413, ViewOCC ); // Isos Settings - - Mb->setItemEnabled( 800, ViewOCC ); // Create Group - Mb->setItemEnabled( 801, ViewOCC ); // Edit Group - - Mb->setItemEnabled(9998, ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION + // fix for IPAL8958 - allow some commands to execute even when NO viewer is active (rename for example) + bool NotViewerDependentCommand = ( id == 901 || id == 216 || id == 213 ); + if ( !ViewOCC && !ViewVTK && !NotViewerDependentCommand ) + return; + + // fix for IPAL9103, point 2 + if ( CORBA::is_nil( GetGeomGen() ) ) { + SUIT_MessageBox::critical( desk, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_GET_ENGINE" ), tr( "GEOM_BUT_OK" ) ); + return; + } GEOMGUI* library = 0; // try to get-or-load corresponding GUI library - if( theCommandID == 111 || // MENU FILE - IMPORT BREP - theCommandID == 112 || // MENU FILE - IMPORT IGES - theCommandID == 113 || // MENU FILE - IMPORT STEP - theCommandID == 121 || // MENU FILE - EXPORT BREP - theCommandID == 122 || // MENU FILE - EXPORT IGES - theCommandID == 123 || // MENU FILE - EXPORT STEP - theCommandID == 31 || // MENU EDIT - COPY - theCommandID == 33 || // MENU EDIT - DELETE - theCommandID == 411 || // MENU SETTINGS - ADD IN STUDY - theCommandID == 412 || // MENU SETTINGS - SHADING COLOR - theCommandID == 413 || // MENU SETTINGS - ISOS - theCommandID == 414 || // MENU SETTINGS - STEP VALUE FOR SPIN BOXES - theCommandID == 5103 || // MENU TOOLS - CHECK GEOMETRY - theCommandID == 5104 || // MENU TOOLS - LOAD SCRIPT - theCommandID == 8032 || // POPUP VIEWER - COLOR - theCommandID == 8033 || // POPUP VIEWER - TRANSPARENCY - theCommandID == 8034 || // POPUP VIEWER - ISOS - theCommandID == 804 || // POPUP VIEWER - ADD IN STUDY - theCommandID == 901 || // OBJECT BROWSER - RENAME - theCommandID == 9024 ) { // OBJECT BROWSER - OPEN - library = geomGUI->getLibrary( "libGEOMToolsGUI.so" ); - } - else if( theCommandID == 211 || // MENU VIEW - WIREFRAME/SHADING - theCommandID == 212 || // MENU VIEW - DISPLAY ALL - theCommandID == 213 || // MENU VIEW - DISPLAY ONLY - theCommandID == 214 || // MENU VIEW - ERASE ALL - theCommandID == 215 || // MENU VIEW - ERASE - theCommandID == 216 || // MENU VIEW - DISPLAY - theCommandID == 80311 || // POPUP VIEWER - WIREFRAME - theCommandID == 80312 ) { // POPUP VIEWER - SHADING - library = geomGUI->getLibrary( "libDisplayGUI.so" ); - } - else if( theCommandID == 4011 || // MENU BASIC - POINT - theCommandID == 4012 || // MENU BASIC - LINE - theCommandID == 4013 || // MENU BASIC - CIRCLE - theCommandID == 4014 || // MENU BASIC - ELLIPSE - theCommandID == 4015 || // MENU BASIC - ARC - theCommandID == 4016 || // MENU BASIC - VECTOR - theCommandID == 4017 || // MENU BASIC - PLANE - theCommandID == 4018 || // MENU BASIC - WPLANE - theCommandID == 4019 || // MENU BASIC - CURVE - theCommandID == 4020 ) { // MENU BASIC - REPAIR - library = geomGUI->getLibrary( "libBasicGUI.so" ); - } - else if( theCommandID == 4021 || // MENU PRIMITIVE - BOX - theCommandID == 4022 || // MENU PRIMITIVE - CYLINDER - theCommandID == 4023 || // MENU PRIMITIVE - SPHERE - theCommandID == 4024 || // MENU PRIMITIVE - TORUS - theCommandID == 4025 ) { // MENU PRIMITIVE - CONE - library = geomGUI->getLibrary( "libPrimitiveGUI.so" ); - } - else if( theCommandID == 4031 || // MENU GENERATION - PRISM - theCommandID == 4032 || // MENU GENERATION - REVOLUTION - theCommandID == 4033 || // MENU GENERATION - FILLING - theCommandID == 4034 ) { // MENU GENERATION - PIPE - library = geomGUI->getLibrary( "libGenerationGUI.so" ); - } - else if( theCommandID == 404 || // MENU ENTITY - SKETCHER - theCommandID == 407 ) { // MENU ENTITY - EXPLODE - library = geomGUI->getLibrary( "libEntityGUI.so" ); - } - else if( theCommandID == 4081 || // MENU BUILD - EDGE - theCommandID == 4082 || // MENU BUILD - WIRE - theCommandID == 4083 || // MENU BUILD - FACE - theCommandID == 4084 || // MENU BUILD - SHELL - theCommandID == 4085 || // MENU BUILD - SOLID - theCommandID == 4086 ) { // MENU BUILD - COMPUND - library = geomGUI->getLibrary( "libBuildGUI.so" ); - } - else if( theCommandID == 5011 || // MENU BOOLEAN - FUSE - theCommandID == 5012 || // MENU BOOLEAN - COMMON - theCommandID == 5013 || // MENU BOOLEAN - CUT - theCommandID == 5014 ) { // MENU BOOLEAN - SECTION - library = geomGUI->getLibrary( "libBooleanGUI.so" ); - } - else if( theCommandID == 5021 || // MENU TRANSFORMATION - TRANSLATION - theCommandID == 5022 || // MENU TRANSFORMATION - ROTATION - theCommandID == 5023 || // MENU TRANSFORMATION - LOCATION - theCommandID == 5024 || // MENU TRANSFORMATION - MIRROR - theCommandID == 5025 || // MENU TRANSFORMATION - SCALE - theCommandID == 5026 || // MENU TRANSFORMATION - OFFSET - theCommandID == 5027 || // MENU TRANSFORMATION - MULTI-TRANSLATION - theCommandID == 5028 ) { // MENU TRANSFORMATION - MULTI-ROTATION - library = geomGUI->getLibrary( "libTransformationGUI.so" ); - } - else if( theCommandID == 503 || // MENU OPERATION - PARTITION - theCommandID == 504 || // MENU OPERATION - ARCHIMEDE - theCommandID == 505 || // MENU OPERATION - FILLET - theCommandID == 506 || // MENU OPERATION - CHAMFER - theCommandID == 507 ) { // MENU OPERATION - CLIPPING RANGE - library = geomGUI->getLibrary( "libOperationGUI.so" ); - } - else if( theCommandID == 601 || // MENU REPAIR - SEWING - theCommandID == 603 || // MENU REPAIR - SUPPRESS FACES - theCommandID == 604 || // MENU REPAIR - SUPPRESS HOLE - theCommandID == 605 || // MENU REPAIR - SHAPE PROCESSING - theCommandID == 606 || // MENU REPAIR - CLOSE CONTOUR - theCommandID == 607 || // MENU REPAIR - REMOVE INTERNAL WIRES - theCommandID == 608 || // MENU REPAIR - ADD POINT ON EDGE - theCommandID == 609 || // MENU REPAIR - FREE BOUNDARIES - theCommandID == 610 || // MENU REPAIR - FREE FACES - theCommandID == 602 ) { // MENU REPAIR - GLUE FACES - library = geomGUI->getLibrary( "libRepairGUI.so" ); - } - else if( theCommandID == 701 || // MENU MEASURE - PROPERTIES - theCommandID == 702 || // MENU MEASURE - CDG - theCommandID == 703 || // MENU MEASURE - INERTIA - theCommandID == 7041 || // MENU MEASURE - BOUNDING BOX - theCommandID == 7042 || // MENU MEASURE - MIN DISTANCE - theCommandID == 705 || // MENU MEASURE - TOLERANCE - theCommandID == 706 || // MENU MEASURE - WHATIS - theCommandID == 707 || // MENU MEASURE - CHECK - theCommandID == 7072 || // MENU MEASURE - CHECK COMPOUND OF BLOCKS - theCommandID == 708 ) { // MENU MEASURE - POINT COORDINATES - library = geomGUI->getLibrary( "libMeasureGUI.so" ); - } - else if( theCommandID == 800 || // MENU GROUP - CREATE - theCommandID == 801 ) { // MENU GROUP - EDIT - library = geomGUI->getLibrary( "libGroupGUI.so" ); - } - else if( theCommandID == 9999 || // MENU BLOCKS - HEXAHEDRAL SOLID - theCommandID == 9998 || // MENU BLOCKS - MULTI-TRANSFORMATION - theCommandID == 9997 || // MENU BLOCKS - QUADRANGLE FACE - theCommandID == 99991 || // MENU BLOCKS - PROPAGATE - theCommandID == 9995 ) { // MENU BLOCKS - EXPLODE ON BLOCKS - library = geomGUI->getLibrary( "libBlocksGUI.so" ); + if( id == 111 || // MENU FILE - IMPORT BREP + id == 112 || // MENU FILE - IMPORT IGES + id == 113 || // MENU FILE - IMPORT STEP + id == 121 || // MENU FILE - EXPORT BREP + id == 122 || // MENU FILE - EXPORT IGES + id == 123 || // MENU FILE - EXPORT STEP + id == 2171 || // POPUP VIEWER - SELECT ONLY - VERTEX + id == 2172 || // POPUP VIEWER - SELECT ONLY - EDGE + id == 2173 || // POPUP VIEWER - SELECT ONLY - WIRE + id == 2174 || // POPUP VIEWER - SELECT ONLY - FACE + id == 2175 || // POPUP VIEWER - SELECT ONLY - SHELL + id == 2176 || // POPUP VIEWER - SELECT ONLY - SOLID + id == 2177 || // POPUP VIEWER - SELECT ONLY - COMPOUND + id == 2178 || // POPUP VIEWER - SELECT ONLY - SELECT ALL + id == 31 || // MENU EDIT - COPY + id == 33 || // MENU EDIT - DELETE + id == 411 || // MENU SETTINGS - ADD IN STUDY + id == 412 || // MENU SETTINGS - SHADING COLOR + id == 5103 || // MENU TOOLS - CHECK GEOMETRY + id == 8032 || // POPUP VIEWER - COLOR + id == 8033 || // POPUP VIEWER - TRANSPARENCY + id == 8034 || // POPUP VIEWER - ISOS + id == 8035 || // POPUP VIEWER - AUTO COLOR + id == 8036 || // POPUP VIEWER - DISABLE AUTO COLOR + id == 804 || // POPUP VIEWER - ADD IN STUDY + id == 901 || // OBJECT BROWSER - RENAME + id == 9024 ) { // OBJECT BROWSER - OPEN + //cout << "id " << id << " received" << endl; +#ifndef WNT + library = getLibrary( "libGEOMToolsGUI.so" ); +#else + library = getLibrary( "GEOMToolsGUI.dll" ); +#endif } - - // call method of corresponding GUI library - if ( library ) { - return library->OnGUIEvent( theCommandID, parent ); + else if( id == 211 || // MENU VIEW - WIREFRAME/SHADING + id == 212 || // MENU VIEW - DISPLAY ALL + id == 213 || // MENU VIEW - DISPLAY ONLY + id == 214 || // MENU VIEW - ERASE ALL + id == 215 || // MENU VIEW - ERASE + id == 216 || // MENU VIEW - DISPLAY + id == 80311 || // POPUP VIEWER - WIREFRAME + id == 80312 ) { // POPUP VIEWER - SHADING +#ifndef WNT + library = getLibrary( "libDisplayGUI.so" ); +#else + library = getLibrary( "DisplayGUI.dll" ); +#endif + } + else if( id == 4011 || // MENU BASIC - POINT + id == 4012 || // MENU BASIC - LINE + id == 4013 || // MENU BASIC - CIRCLE + id == 4014 || // MENU BASIC - ELLIPSE + id == 4015 || // MENU BASIC - ARC + id == 4016 || // MENU BASIC - VECTOR + id == 4017 || // MENU BASIC - PLANE + id == 4018 || // MENU BASIC - WPLANE + id == 4019 || // MENU BASIC - CURVE + id == 4020 ) { // MENU BASIC - REPAIR +#ifndef WNT + library = getLibrary( "libBasicGUI.so" ); +#else + library = getLibrary( "BasicGUI.dll" ); +#endif + } + else if( id == 4021 || // MENU PRIMITIVE - BOX + id == 4022 || // MENU PRIMITIVE - CYLINDER + id == 4023 || // MENU PRIMITIVE - SPHERE + id == 4024 || // MENU PRIMITIVE - TORUS + id == 4025 ) { // MENU PRIMITIVE - CONE +#ifndef WNT + library = getLibrary( "libPrimitiveGUI.so" ); +#else + library = getLibrary( "PrimitiveGUI.dll" ); +#endif } - else { - QAD_MessageBox::error1( parent, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_LIB_NOT_FOUND" ), tr( "GEOM_BUT_OK" ) ); + else if( id == 4031 || // MENU GENERATION - PRISM + id == 4032 || // MENU GENERATION - REVOLUTION + id == 4033 || // MENU GENERATION - FILLING + id == 4034 ) { // MENU GENERATION - PIPE +#ifndef WNT + library = getLibrary( "libGenerationGUI.so" ); +#else + library = getLibrary( "GenerationGUI.dll" ); +#endif } - return false; + else if( id == 404 || // MENU ENTITY - SKETCHER + id == 407 ) { // MENU ENTITY - EXPLODE +#ifndef WNT + library = getLibrary( "libEntityGUI.so" ); +#else + library = getLibrary( "EntityGUI.dll" ); +#endif + } + else if( id == 4081 || // MENU BUILD - EDGE + id == 4082 || // MENU BUILD - WIRE + id == 4083 || // MENU BUILD - FACE + id == 4084 || // MENU BUILD - SHELL + id == 4085 || // MENU BUILD - SOLID + id == 4086 ) { // MENU BUILD - COMPUND +#ifndef WNT + library = getLibrary( "libBuildGUI.so" ); +#else + library = getLibrary( "BuildGUI.dll" ); +#endif + } + else if( id == 5011 || // MENU BOOLEAN - FUSE + id == 5012 || // MENU BOOLEAN - COMMON + id == 5013 || // MENU BOOLEAN - CUT + id == 5014 ) { // MENU BOOLEAN - SECTION +#ifndef WNT + library = getLibrary( "libBooleanGUI.so" ); +#else + library = getLibrary( "BooleanGUI.dll" ); +#endif + } + else if( id == 5021 || // MENU TRANSFORMATION - TRANSLATION + id == 5022 || // MENU TRANSFORMATION - ROTATION + id == 5023 || // MENU TRANSFORMATION - LOCATION + id == 5024 || // MENU TRANSFORMATION - MIRROR + id == 5025 || // MENU TRANSFORMATION - SCALE + id == 5026 || // MENU TRANSFORMATION - OFFSET + id == 5027 || // MENU TRANSFORMATION - MULTI-TRANSLATION + id == 5028 ) { // MENU TRANSFORMATION - MULTI-ROTATION +#ifndef WNT + library = getLibrary( "libTransformationGUI.so" ); +#else + library = getLibrary( "TransformationGUI.dll" ); +#endif + } + else if( id == 503 || // MENU OPERATION - PARTITION + id == 504 || // MENU OPERATION - ARCHIMEDE + id == 505 || // MENU OPERATION - FILLET + id == 506 || // MENU OPERATION - CHAMFER + id == 507 || // MENU OPERATION - CLIPPING RANGE + id == 508 ) { // MENU OPERATION - GET SHAPES ON SHAPE +#ifndef WNT + library = getLibrary( "libOperationGUI.so" ); +#else + library = getLibrary( "OperationGUI.dll" ); +#endif + } + else if( id == 601 || // MENU REPAIR - SEWING + id == 603 || // MENU REPAIR - SUPPRESS FACES + id == 604 || // MENU REPAIR - SUPPRESS HOLE + id == 605 || // MENU REPAIR - SHAPE PROCESSING + id == 606 || // MENU REPAIR - CLOSE CONTOUR + id == 607 || // MENU REPAIR - REMOVE INTERNAL WIRES + id == 608 || // MENU REPAIR - ADD POINT ON EDGE + id == 609 || // MENU MEASURE - FREE BOUNDARIES + id == 610 || // MENU MEASURE - FREE FACES + id == 611 || // MENU REPAIR - CHANGE ORIENTATION + id == 602 || // MENU REPAIR - GLUE FACES + id == 612 ) { // MENU REPAIR - REMOVE EXTRA EDGES +#ifndef WNT + library = getLibrary( "libRepairGUI.so" ); +#else + library = getLibrary( "RepairGUI.dll" ); +#endif + } + else if( id == 701 || // MENU MEASURE - PROPERTIES + id == 702 || // MENU MEASURE - CDG + id == 703 || // MENU MEASURE - INERTIA + id == 704 || // MENU MEASURE - NORMALE + id == 7041 || // MENU MEASURE - BOUNDING BOX + id == 7042 || // MENU MEASURE - MIN DISTANCE + id == 7043 || // MENU MEASURE - ANGLE + id == 705 || // MENU MEASURE - TOLERANCE + id == 706 || // MENU MEASURE - WHATIS + id == 707 || // MENU MEASURE - CHECK + id == 7072 || // MENU MEASURE - CHECK COMPOUND OF BLOCKS + id == 708 ) { // MENU MEASURE - POINT COORDINATES +#ifndef WNT + library = getLibrary( "libMeasureGUI.so" ); +#else + library = getLibrary( "MeasureGUI.dll" ); +#endif + } + else if( id == 800 || // MENU GROUP - CREATE + id == 8001 || // POPUP MENU - CREATE GROUP + id == 801 ) { // MENU GROUP - EDIT +#ifndef WNT + library = getLibrary( "libGroupGUI.so" ); +#else + library = getLibrary( "GroupGUI.dll" ); +#endif + } + else if( id == 9999 || // MENU BLOCKS - HEXAHEDRAL SOLID + id == 9998 || // MENU BLOCKS - MULTI-TRANSFORMATION + id == 9997 || // MENU BLOCKS - QUADRANGLE FACE + id == 99991 || // MENU BLOCKS - PROPAGATE + id == 9995 ) { // MENU BLOCKS - EXPLODE ON BLOCKS +#ifndef WNT + library = getLibrary( "libBlocksGUI.so" ); +#else + library = getLibrary( "BlocksGUI.dll" ); +#endif + } + + // call method of corresponding GUI library + if ( library ) + library->OnGUIEvent( id, desk ); + else + SUIT_MessageBox::critical( desk, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_LIB_NOT_FOUND" ), tr( "GEOM_BUT_OK" ) ); } @@ -446,14 +545,16 @@ bool GeometryGUI::OnGUIEvent(int theCommandID, QAD_Desktop* parent) // function : GeometryGUI::OnKeyPress() // purpose : Called when any key is pressed by user [static] //================================================================================= -bool GeometryGUI::OnKeyPress(QKeyEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame) +void GeometryGUI::OnKeyPress( SUIT_ViewWindow* win, QKeyEvent* pe ) { - GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI(); GUIMap::Iterator it; bool bOk = true; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) - bOk = bOk && it.data()->OnKeyPress( pe, parent, studyFrame ); - return bOk; + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) { + SUIT_Application* anApp = application(); + if (!anApp) return; + bOk = bOk && it.value()->OnKeyPress( pe, anApp->desktop(), win ); + } +// return bOk; } @@ -461,14 +562,16 @@ bool GeometryGUI::OnKeyPress(QKeyEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* // function : GeometryGUI::OnMouseMove() // purpose : Manages mouse move events [static] //================================================================================= -bool GeometryGUI::OnMouseMove(QMouseEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame) +void GeometryGUI::OnMouseMove( SUIT_ViewWindow* win, QMouseEvent* pe ) { - GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI(); GUIMap::Iterator it; bool bOk = true; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) - bOk = bOk && it.data()->OnMouseMove( pe, parent, studyFrame ); - return bOk; + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) { + SUIT_Application* anApp = application(); + if (!anApp) return; + bOk = bOk && it.value()->OnMouseMove( pe, anApp->desktop(), win ); + } +// return bOk; } @@ -476,34 +579,33 @@ bool GeometryGUI::OnMouseMove(QMouseEvent* pe, QAD_Desktop* parent, QAD_StudyFra // function : GeometryGUI::0nMousePress() // purpose : Manage mouse press events [static] //================================================================================= -bool GeometryGUI::OnMousePress(QMouseEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame) +void GeometryGUI::OnMousePress( SUIT_ViewWindow* win, QMouseEvent* pe ) { - GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI(); GUIMap::Iterator it; // OnMousePress() should return false if this event should be processed further // (see OCCViewer_Viewer3d::onMousePress() for explanation) bool processed = false; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) - processed = processed || it.data()->OnMousePress( pe, parent, studyFrame ); - return processed; + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) { + SUIT_Application* anApp = application(); + if (!anApp) return; + processed = processed || it.value()->OnMousePress( pe, anApp->desktop(), win ); + } +// return processed; } -static void UpdateVtkSelection(QAD_Desktop* parent) +/* +static void UpdateVtkSelection() { - if (!parent->getActiveStudy()) return; - - QList aFrameList = parent->getActiveStudy()->getStudyFrames(); - - for (QAD_StudyFrame* aStudyFrame = aFrameList.first(); aStudyFrame; aStudyFrame = aFrameList.next()) { - if (aStudyFrame->getTypeView() == VIEW_VTK) { - QAD_ViewFrame* aViewFrame = aStudyFrame->getRightFrame()->getViewFrame(); - VTKViewer_ViewFrame* aVtkViewFrame = dynamic_cast(aViewFrame); - if (!aVtkViewFrame) continue; - VTKViewer_RenderWindowInteractor* anInteractor = aVtkViewFrame->getRWInteractor(); - if (anInteractor) { + QPtrList winList = application()->desktop()->windows(); + SUIT_ViewWindow* win = 0; + for ( win = winList.first(); win; win = winList.next() ) { + if ( win->getViewManager()->getTypeView() == VIEW_VTK ) { + SVTK_ViewWindow* vw = dynamic_cast( window ); + if ( vw ) { + SVTK_RenderWindowInteractor* anInteractor = vw->getRWInteractor(); anInteractor->SetSelectionProp(); anInteractor->SetSelectionTolerance(); - VTKViewer_InteractorStyleSALOME* aStyle = anInteractor->GetInteractorStyleSALOME(); + SVTK_InteractorStyleSALOME* aStyle = anInteractor->GetInteractorStyleSALOME(); if (aStyle) { aStyle->setPreselectionProp(); } @@ -516,50 +618,54 @@ static void UpdateVtkSelection(QAD_Desktop* parent) // function : GeometryGUI::SetSettings() // purpose : Called when GEOM module is activated [static] //================================================================================= -bool GeometryGUI::SetSettings(QAD_Desktop* parent) +bool GeometryGUI::SetSettings() { - GeometryGUI* geomGUI = GetGeomGUI(); - QMenuBar* Mb = parent->getMainMenuBar(); - QAD_Study* ActiveStudy = parent->getActiveStudy(); - - + QMenuBar* Mb = parent->getMainMenuBar(); + SUIT_Study* ActiveStudy = application()->activeStudy(); - /* Wireframe or Shading */ +// Wireframe or Shading int DisplayMode = 0; - bool ViewOCC = false; - if ( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_OCC ) { - OCCViewer_Viewer3d* v3d = ((OCCViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewer(); - Handle(AIS_InteractiveContext) ic = v3d->getAISContext(); - DisplayMode = ic->DisplayMode(); - ViewOCC = true; + SUIT_ViewWindow* window = application()->desktop()->activeWindow(); + bool ViewOCC = ( window && window->getViewManager()->getType() == VIEW_OCC ); + bool ViewVTK = ( window && window->getViewManager()->getType() == VIEW_VTK ); + if ( ViewOCC ) { + OCCViewer_ViewManager* vm = dynamic_cast( window->getViewManager() ); + if ( vm ) { + Handle(AIS_InteractiveContext) ic = vm->getOCCViewer()->getAISContext(); + DisplayMode = ic->DisplayMode(); + } } - else if (ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_VTK ) { - VTKViewer_RenderWindowInteractor* myRenderInter = ((VTKViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRWInteractor(); - DisplayMode = myRenderInter->GetDisplayMode(); + else if ( ViewVTK ) { + SVTK_ViewWindow* vw = dynamic_cast( window ); + if ( vw ) { + SVTK_RenderWindowInteractor* myRenderInter = vw->getRWInteractor(); + DisplayMode = myRenderInter->GetDisplayMode(); + } } if( DisplayMode == 1 ) + getApp()-> Mb->changeItem( 211, tr( "GEOM_MEN_WIREFRAME" ) ); else Mb->changeItem( 211, tr( "GEOM_MEN_SHADING" ) ); - /* Add in Study - !!!ALWAYS TRUE!!! */ /////// VSR : TO BE REMOVED + // Add in Study - !!!ALWAYS TRUE!!! /////// VSR : TO BE REMOVED QString AddInStudy = QAD_CONFIG->getSetting("Geometry:SettingsAddInStudy"); int Settings_AddInStudy; - /*if(!AddInStudy.isEmpty()) - Settings_AddInStudy = AddInStudy.toInt(); - else - */ + // if(!AddInStudy.isEmpty()) + // Settings_AddInStudy = AddInStudy.toInt(); + // else + Settings_AddInStudy = 1; Mb->setItemChecked(411, Settings_AddInStudy); - /* step value */ + // step value QString S = QAD_CONFIG->getSetting("Geometry:SettingsGeomStep"); if(S.isEmpty()) QAD_CONFIG->addSetting("Geometry:SettingsGeomStep", "100"); - /* isos */ + // isos int count = ActiveStudy->getStudyFramesCount(); for(int i = 0; i < count; i++) { if(ActiveStudy->getStudyFrame(i)->getTypeView() == VIEW_OCC) { @@ -575,414 +681,865 @@ bool GeometryGUI::SetSettings(QAD_Desktop* parent) } } - //Mb->setItemEnabled(404, ViewOCC); // SKETCHER - Mb->setItemEnabled(603, ViewOCC); // SuppressFace - Mb->setItemEnabled(604, ViewOCC); // SuppressHole - Mb->setItemEnabled(606, ViewOCC); // CloseContour - Mb->setItemEnabled(607, ViewOCC); // RemoveInternalWires - Mb->setItemEnabled(608, ViewOCC); // AddPointOnEdge -// Mb->setItemEnabled(609, ViewOCC); // Free boundaries - Mb->setItemEnabled(413, ViewOCC); // Isos Settings - - Mb->setItemEnabled( 800, ViewOCC ); // Create Group - Mb->setItemEnabled( 801, ViewOCC ); // Edit Group + setActionsEnabled(); - Mb->setItemEnabled(9998, ViewOCC); // MENU BLOCKS - MULTI-TRANSFORMATION - - // PAL5356: update VTK selection - ::UpdateVtkSelection(parent); + ::UpdateVtkSelection(); bool bOk = true; GUIMap::Iterator it; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) bOk = bOk && it.data()->SetSettings( parent ); - - // MZN: Enable/disable "Clipping range" menu item(from GEOM_CLIPPING variable) + + // MZN: Enable/disable "Clipping range" menu item(from GEOM_CLIPPING variable) if (getenv( "GEOM_CLIPPING" ) == NULL) { QMenuItem* mi = Mb->findItem(50); if (mi && mi->popup()) - mi->popup()->removeItem(507); - } - + mi->popup()->removeItem(507); + } + return bOk; } +*/ + +//======================================================================= +// function : createGeomAction +// purpose : +//======================================================================= +void GeometryGUI::createGeomAction( const int id, const QString& po_id, const QString& icon_id, const int key, const bool toggle ) +{ + QIcon icon; + QWidget* parent = application()->desktop(); + SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr(); + QPixmap pix; + if ( icon_id.length() ) + pix = resMgr->loadPixmap( "GEOM", tr( icon_id.toLatin1().constData() ) ); + else + pix = resMgr->loadPixmap( "GEOM", tr( (QString( "ICO_" )+po_id).toLatin1().constData() ), false ); + if ( !pix.isNull() ) + icon = QIcon( pix ); + + QString tooltip = tr( (QString( "TOP_" )+po_id).toLatin1().constData() ), + menu = tr( (QString( "MEN_" )+po_id).toLatin1().constData() ), + status_bar = tr( (QString( "STB_" )+po_id).toLatin1().constData() ); + + createAction( id, tooltip, icon, menu, status_bar, key, parent, toggle, this, SLOT( OnGUIEvent() ) ); +} + + + +//======================================================================= +// function : GeometryGUI::initialize() +// purpose : Called when GEOM module is created +//======================================================================= +void GeometryGUI::initialize( CAM_Application* app ) +{ + SalomeApp_Module::initialize( app ); + + // ----- create actions -------------- + + createGeomAction( 111, "IMPORT", "", (CTRL + Key_I) ); + createGeomAction( 121, "EXPORT", "", (CTRL + Key_E) ); + + createGeomAction( 33, "DELETE", "", Qt::Key_Delete ); + + createGeomAction( 4011, "POINT" ); + createGeomAction( 4012, "LINE" ); + createGeomAction( 4013, "CIRCLE" ); + createGeomAction( 4014, "ELLIPSE" ); + createGeomAction( 4015, "ARC" ); + createGeomAction( 4019, "CURVE" ); + createGeomAction( 4016, "VECTOR" ); + createGeomAction( 4017, "PLANE" ); + createGeomAction( 4018, "WORK_PLANE" ); + createGeomAction( 4020, "LOCAL_CS" ); + + createGeomAction( 4021, "BOX" ); + createGeomAction( 4022, "CYLINDER" ); + createGeomAction( 4023, "SPHERE" ); + createGeomAction( 4024, "TORUS" ); + createGeomAction( 4025, "CONE" ); + + createGeomAction( 4031, "EXTRUSION" ); + createGeomAction( 4032, "REVOLUTION" ); + createGeomAction( 4033, "FILLING" ); + createGeomAction( 4034, "PIPE" ); + + createGeomAction( 800, "GROUP_CREATE" ); + createGeomAction( 801, "GROUP_EDIT" ); + + createGeomAction( 9997, "Q_FACE" ); + createGeomAction( 9999, "HEX_SOLID" ); + + createGeomAction( 404, "SKETCH" ); + createGeomAction( 407, "EXPLODE" ); + + createGeomAction( 4081, "EDGE" ); + createGeomAction( 4082, "WIRE" ); + createGeomAction( 4083, "FACE" ); + createGeomAction( 4084, "SHELL" ); + createGeomAction( 4085, "SOLID" ); + createGeomAction( 4086, "COMPOUND" ); + + createGeomAction( 5011, "FUSE" ); + createGeomAction( 5012, "COMMON" ); + createGeomAction( 5013, "CUT" ); + createGeomAction( 5014, "SECTION" ); + + createGeomAction( 5021, "TRANSLATION" ); + createGeomAction( 5022, "ROTATION" ); + createGeomAction( 5023, "MODIFY_LOCATION" ); + createGeomAction( 5024, "MIRROR" ); + createGeomAction( 5025, "SCALE" ); + createGeomAction( 5026, "OFFSET" ); + createGeomAction( 5027, "MUL_TRANSLATION" ); + createGeomAction( 5028, "MUL_ROTATION" ); + + createGeomAction( 503, "PARTITION" ); + createGeomAction( 504, "ARCHIMEDE" ); + createGeomAction( 505, "FILLET" ); + createGeomAction( 506, "CHAMFER" ); + //createGeomAction( 507, "CLIPPING" ); + createGeomAction( 508, "GET_SHAPES_ON_SHAPES" ); + + createGeomAction( 9998, "MUL_TRANSFORM" ); + createGeomAction( 9995, "EXPLODE_BLOCKS" ); + createGeomAction( 99991, "PROPAGATE" ); + + createGeomAction( 601, "SEWING" ); + createGeomAction( 602, "GLUE_FACES" ); + createGeomAction( 603, "SUPPRESS_FACES" ); + createGeomAction( 604, "SUPPERSS_HOLES" ); + createGeomAction( 605, "SHAPE_PROCESS" ); + createGeomAction( 606, "CLOSE_CONTOUR" ); + createGeomAction( 607, "SUPPRESS_INT_WIRES" ); + createGeomAction( 608, "POINT_ON_EDGE" ); + createGeomAction( 609, "CHECK_FREE_BNDS" ); + createGeomAction( 610, "CHECK_FREE_FACES" ); + createGeomAction( 611, "CHANGE_ORIENTATION" ); + createGeomAction( 612, "REMOVE_EXTRA_EDGES" ); + + createGeomAction( 708, "POINT_COORDS" ); + createGeomAction( 701, "BASIC_PROPS" ); + createGeomAction( 702, "MASS_CENTER" ); + createGeomAction( 703, "INERTIA" ); + createGeomAction( 704, "NORMALE" ); + createGeomAction( 7041, "BND_BOX" ); + createGeomAction( 7042, "MIN_DIST" ); + createGeomAction( 7043, "MEASURE_ANGLE" ); + + createGeomAction( 705, "TOLERANCE" ); + createGeomAction( 706, "WHAT_IS" ); + createGeomAction( 707, "CHECK" ); + createGeomAction( 7072, "CHECK_COMPOUND" ); + +#ifdef _DEBUG_ // PAL16821 + createGeomAction( 5103, "CHECK_GEOMETRY" ); +#endif + createGeomAction( 412, "SHADING_COLOR" ); + + createGeomAction( 211, "SHADING" ); + createGeomAction( 212, "DISPLAY_ALL" ); + createGeomAction( 214, "ERASE_ALL" ); + createGeomAction( 216, "DISPLAY" ); + createGeomAction( 2171, "VERTEX_SEL_ONLY" ,"", 0, true ); + createGeomAction( 2172, "EDGE_SEL_ONLY", "", 0, true ); + createGeomAction( 2173, "WIRE_SEL_ONLY", "", 0, true ); + createGeomAction( 2174, "FACE_SEL_ONLY", "", 0, true ); + createGeomAction( 2175, "SHELL_SEL_ONLY", "", 0, true ); + createGeomAction( 2176, "SOLID_SEL_ONLY", "", 0, true ); + createGeomAction( 2177, "COMPOUND_SEL_ONLY", "", 0, true ); + createGeomAction( 2178, "ALL_SEL_ONLY", "", 0, true ); + createGeomAction( 213, "DISPLAY_ONLY" ); + createGeomAction( 215, "ERASE" ); + + createGeomAction( 901, "POP_RENAME", "", Qt::Key_F2 ); + createGeomAction( 80311, "POP_WIREFRAME", "", 0, true ); + createGeomAction( 80312, "POP_SHADING", "", 0, true ); + createGeomAction( 8032, "POP_COLOR" ); + createGeomAction( 8033, "POP_TRANSPARENCY" ); + createGeomAction( 8034, "POP_ISOS" ); + createGeomAction( 8035, "POP_AUTO_COLOR" ); + createGeomAction( 8036, "POP_DISABLE_AUTO_COLOR" ); + createGeomAction( 8001, "POP_CREATE_GROUP" ); + + // make wireframe-shading items to be exclusive (only one at a time is selected) + //QActionGroup* dispModeGr = new QActionGroup( this, "", true ); + //dispModeGr->add( action( 80311 ) ); + //dispModeGr->add( action( 80312 ) ); + // ---- create menu -------------------------- + + int fileId = createMenu( tr( "MEN_FILE" ), -1, -1 ); + createMenu( separator(), fileId, 10 ); + createMenu( 111, fileId, 10 ); + createMenu( 121, fileId, 10 ); + createMenu( separator(), fileId, -1 ); + + int editId = createMenu( tr( "MEN_EDIT" ), -1, -1 ); + createMenu( 33, editId, -1 ); + + int newEntId = createMenu( tr( "MEN_NEW_ENTITY" ), -1, -1, 10 ); + + int basicId = createMenu( tr( "MEN_BASIC" ), newEntId, -1 ); + createMenu( 4011, basicId, -1 ); + createMenu( 4012, basicId, -1 ); + createMenu( 4013, basicId, -1 ); + createMenu( 4014, basicId, -1 ); + createMenu( 4015, basicId, -1 ); + createMenu( 4019, basicId, -1 ); + createMenu( separator(), basicId, -1 ); + createMenu( 4016, basicId, -1 ); + createMenu( 4017, basicId, -1 ); + createMenu( 4018, basicId, -1 ); + createMenu( 4020, basicId, -1 ); + + int primId = createMenu( tr( "MEN_PRIMITIVES" ), newEntId, -1 ); + createMenu( 4021, primId, -1 ); + createMenu( 4022, primId, -1 ); + createMenu( 4023, primId, -1 ); + createMenu( 4024, primId, -1 ); + createMenu( 4025, primId, -1 ); + + int genId = createMenu( tr( "MEN_GENERATION" ), newEntId, -1 ); + createMenu( 4031, genId, -1 ); + createMenu( 4032, genId, -1 ); + createMenu( 4033, genId, -1 ); + createMenu( 4034, genId, -1 ); + createMenu( separator(), newEntId, -1 ); + + int groupId = createMenu( tr( "MEN_GROUP" ), newEntId, -1 ); + createMenu( 800, groupId, -1 ); + createMenu( 801, groupId, -1 ); + createMenu( separator(), newEntId, -1 ); + + int blocksId = createMenu( tr( "MEN_BLOCKS" ), newEntId, -1 ); + createMenu( 9997, blocksId, -1 ); + createMenu( 9999, blocksId, -1 ); + + createMenu( separator(), newEntId, -1 ); + createMenu( 404, newEntId, -1 ); + createMenu( separator(), newEntId, -1 ); + createMenu( 407, newEntId, -1 ); + + int buildId = createMenu( tr( "MEN_BUILD" ), newEntId, -1 ); + createMenu( 4081, buildId, -1 ); + createMenu( 4082, buildId, -1 ); + createMenu( 4083, buildId, -1 ); + createMenu( 4084, buildId, -1 ); + createMenu( 4085, buildId, -1 ); + createMenu( 4086, buildId, -1 ); + + int operId = createMenu( tr( "MEN_OPERATIONS" ), -1, -1, 10 ); + + int boolId = createMenu( tr( "MEN_BOOLEAN" ), operId, -1 ); + createMenu( 5011, boolId, -1 ); + createMenu( 5012, boolId, -1 ); + createMenu( 5013, boolId, -1 ); + createMenu( 5014, boolId, -1 ); + + int transId = createMenu( tr( "MEN_TRANSFORMATION" ), operId, -1 ); + createMenu( 5021, transId, -1 ); + createMenu( 5022, transId, -1 ); + createMenu( 5023, transId, -1 ); + createMenu( 5024, transId, -1 ); + createMenu( 5025, transId, -1 ); + createMenu( 5026, transId, -1 ); + createMenu( separator(), transId, -1 ); + createMenu( 5027, transId, -1 ); + createMenu( 5028, transId, -1 ); + + createMenu( 503, operId, -1 ); + createMenu( 504, operId, -1 ); + createMenu( 508, operId, -1 ); + createMenu( separator(), operId, -1 ); + createMenu( 505, transId, -1 ); + createMenu( 506, transId, -1 ); + //createMenu( 507, transId, -1 ); + + int blockId = createMenu( tr( "MEN_BLOCKS" ), operId, -1 ); + createMenu( 9998, blockId, -1 ); + createMenu( 9995, blockId, -1 ); + createMenu( 99991, blockId, -1 ); + + int repairId = createMenu( tr( "MEN_REPAIR" ), -1, -1, 10 ); + createMenu( 605, repairId, -1 ); + createMenu( 603, repairId, -1 ); + createMenu( 606, repairId, -1 ); + createMenu( 607, repairId, -1 ); + createMenu( 604, repairId, -1 ); + createMenu( 601, repairId, -1 ); + createMenu( 602, repairId, -1 ); + createMenu( 608, repairId, -1 ); + //createMenu( 609, repairId, -1 ); + //createMenu( 610, repairId, -1 ); + createMenu( 611, repairId, -1 ); + createMenu( 612, repairId, -1 ); + + int measurId = createMenu( tr( "MEN_MEASURES" ), -1, -1, 10 ); + createMenu( 708, measurId, -1 ); + createMenu( 701, measurId, -1 ); + createMenu( separator(), measurId, -1 ); + createMenu( 702, measurId, -1 ); + createMenu( 703, measurId, -1 ); + createMenu( 704, measurId, -1 ); + // NPAL16572: move "Check free boundaries" and "Check free faces" from "Repair" to "Measure" + createMenu( separator(), measurId, -1 ); + createMenu( 609, measurId, -1 ); + createMenu( 610, measurId, -1 ); + // NPAL16572 END + createMenu( separator(), measurId, -1 ); + + int dimId = createMenu( tr( "MEN_DIMENSIONS" ), measurId, -1 ); + createMenu( 7041, dimId, -1 ); + createMenu( 7042, dimId, -1 ); + createMenu( 7043, dimId, -1 ); + createMenu( separator(), measurId, -1 ); + + createMenu( 705, measurId, -1 ); + createMenu( separator(), measurId, -1 ); + createMenu( 706, measurId, -1 ); + createMenu( 707, measurId, -1 ); + createMenu( 7072, measurId, -1 ); + +#ifdef _DEBUG_ // PAL16821 + int toolsId = createMenu( tr( "MEN_TOOLS" ), -1, -1, 50 ); + createMenu( separator(), toolsId, -1 ); + createMenu( 5103, toolsId, -1 ); +#endif + //int prefId = createMenu( tr( "MEN_PREFERENCES" ), -1, -1, 50 ); + //createMenu( separator(), prefId, -1 ); + //int geomId = createMenu( tr( "MEN_PREFERENCES_GEOM" ), prefId, -1 ); + //createMenu( 412, geomId, -1 ); + //createMenu( separator(), prefId, -1 ); + + int viewId = createMenu( tr( "MEN_VIEW" ), -1, -1 ); + createMenu( separator(), viewId, -1 ); + + int dispmodeId = createMenu( tr( "MEN_DISPLAY_MODE" ), viewId, -1 ); + createMenu( 211, dispmodeId, -1 ); + + createMenu( separator(), viewId, -1 ); + createMenu( 212, viewId, -1 ); + createMenu( 214, viewId, -1 ); + createMenu( separator(), viewId, -1 ); + +/* + PAL9111: + because of these items are accessible through object browser and viewers + we have removed they from main menu + + createMenu( 216, viewId, -1 ); + createMenu( 213, viewId, -1 ); + createMenu( 215, viewId, -1 ); +*/ + + // ---- create toolbars -------------------------- + + int basicTbId = createTool( tr( "TOOL_BASIC" ) ); + createTool( 4011, basicTbId ); + createTool( 4012, basicTbId ); + createTool( 4013, basicTbId ); + createTool( 4014, basicTbId ); + createTool( 4015, basicTbId ); + createTool( 4019, basicTbId ); + createTool( 4016, basicTbId ); + createTool( 4017, basicTbId ); + createTool( 4018, basicTbId ); + createTool( 4020, basicTbId ); + + int primTbId = createTool( tr( "TOOL_PRIMITIVES" ) ); + createTool( 4021, primTbId ); + createTool( 4022, primTbId ); + createTool( 4023, primTbId ); + createTool( 4024, primTbId ); + createTool( 4025, primTbId ); + + int boolTbId = createTool( tr( "TOOL_BOOLEAN" ) ); + createTool( 5011, boolTbId ); + createTool( 5012, boolTbId ); + createTool( 5013, boolTbId ); + createTool( 5014, boolTbId ); + + int genTbId = createTool( tr( "TOOL_GENERATION" ) ); + createTool( 4031, genTbId ); + createTool( 4032, genTbId ); + createTool( 4033, genTbId ); + createTool( 4034, genTbId ); + + int transTbId = createTool( tr( "TOOL_TRANSFORMATION" ) ); + createTool( 5021, transTbId ); + createTool( 5022, transTbId ); + createTool( 5023, transTbId ); + createTool( 5024, transTbId ); + createTool( 5025, transTbId ); + createTool( 5026, transTbId ); + createTool( separator(), transTbId ); + createTool( 5027, transTbId ); + createTool( 5028, transTbId ); + + // ---- create popup menus -------------------------- + + QString clientOCCorVTK = "(client='OCCViewer' or client='VTKViewer')"; + QString clientOCCorVTK_AndSomeVisible = clientOCCorVTK + " and selcount>0 and isVisible"; + + QString clientOCCorVTKorOB = "(client='ObjectBrowser' or client='OCCViewer' or client='VTKViewer')"; + QString clientOCCorVTKorOB_AndSomeVisible = clientOCCorVTKorOB + " and selcount>0 and isVisible"; + + QString autoColorPrefix = + "(client='ObjectBrowser' or client='OCCViewer') and type='Shape' and selcount=1 and isOCC=true"; + + QtxPopupMgr* mgr = popupMgr(); + mgr->insert( action( 901 ), -1, -1 ); // rename + mgr->setRule( action( 901 ), QString("$type in {'Shape' 'Group'} and selcount=1"), QtxPopupMgr::VisibleRule ); + mgr->insert( action( 33 ), -1, -1 ); // delete + mgr->setRule( action( 33 ), QString("$type in {'Shape' 'Group'} and selcount>0"), QtxPopupMgr::VisibleRule ); + mgr->insert( action( 8001 ), -1, -1 ); // create group + mgr->setRule( action( 8001 ), QString("client='ObjectBrowser' and type='Shape' and selcount=1 and isOCC=true"), QtxPopupMgr::VisibleRule ); + mgr->insert( action( 801 ), -1, -1 ); // edit group + mgr->setRule( action( 801 ), QString("client='ObjectBrowser' and type='Group' and selcount=1 and isOCC=true"), QtxPopupMgr::VisibleRule ); + mgr->insert( separator(), -1, -1 ); // ----------- + dispmodeId = mgr->insert( tr( "MEN_DISPLAY_MODE" ), -1, -1 ); // display mode menu + mgr->insert( action( 80311 ), dispmodeId, -1 ); // wireframe + mgr->setRule( action( 80311 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule ); + mgr->setRule( action( 80311 ), clientOCCorVTK + " and displaymode='Wireframe'", QtxPopupMgr::ToggleRule ); + mgr->insert( action( 80312 ), dispmodeId, -1 ); // shading + mgr->setRule( action( 80312 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule ); + mgr->setRule( action( 80312 ), clientOCCorVTK + " and displaymode='Shading'", QtxPopupMgr::ToggleRule ); + mgr->insert( separator(), -1, -1 ); // ----------- + mgr->insert( action( 8032 ), -1, -1 ); // color + mgr->setRule( action( 8032 ), clientOCCorVTKorOB_AndSomeVisible + " and ($component={'GEOM'})", QtxPopupMgr::VisibleRule ); + mgr->insert( action( 8033 ), -1, -1 ); // transparency + mgr->setRule( action( 8033 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule ); + mgr->insert( action( 8034 ), -1, -1 ); // isos + mgr->setRule( action( 8034 ), clientOCCorVTK_AndSomeVisible + " and selcount>0 and isVisible", QtxPopupMgr::VisibleRule ); + mgr->insert( separator(), -1, -1 ); // ----------- + mgr->insert( action( 8035 ), -1, -1 ); // auto color + mgr->setRule( action( 8035 ), autoColorPrefix + " and isAutoColor=false", QtxPopupMgr::VisibleRule ); + mgr->insert( action( 8036 ), -1, -1 ); // disable auto color + mgr->setRule( action( 8036 ), autoColorPrefix + " and isAutoColor=true", QtxPopupMgr::VisibleRule ); + mgr->insert( separator(), -1, -1 ); // ----------- + + + QString canDisplay = "($component={'GEOM'}) and (selcount>0) and ({true} in $canBeDisplayed) ", + onlyComponent = "((type='Component') and selcount=1)", + rule = canDisplay + "and ((($type in {%1}) and( %2 )) or " + onlyComponent + ")", + types = "'Shape' 'Group'"; + + mgr->insert( action( 216 ), -1, -1 ); // display + mgr->setRule( action( 216 ), rule.arg( types ).arg( "not isVisible" ), QtxPopupMgr::VisibleRule ); + + mgr->insert( action( 215 ), -1, -1 ); // erase + mgr->setRule( action( 215 ), rule.arg( types ).arg( "isVisible" ), QtxPopupMgr::VisibleRule ); + + mgr->insert( action( 214 ), -1, -1 ); // erase All + mgr->setRule( action( 214 ), clientOCCorVTK, QtxPopupMgr::VisibleRule ); + + QString selectOnly = "(client='OCCViewer' or client='VTKViewer') and (selcount=0)"; + + int selectolnyId = mgr->insert( tr("MEN_SELECT_ONLY"), -1, -1); //select only menu + mgr->insert( action(2171), selectolnyId, -1); //Vertex + mgr->setRule(action(2171), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2171), selectOnly + " and selectionmode='VERTEX'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2172), selectolnyId, -1); //Edge + mgr->setRule(action(2172), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2172), selectOnly + " and selectionmode='EDGE'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2173), selectolnyId, -1); //Wire + mgr->setRule(action(2173), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2173), selectOnly + " and selectionmode='WIRE'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2174), selectolnyId, -1); //Face + mgr->setRule(action(2174), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2174), selectOnly + " and selectionmode='FACE'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2175), selectolnyId, -1); //Shell + mgr->setRule(action(2175), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2175), selectOnly + " and selectionmode='SHELL'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2176), selectolnyId, -1); //Solid + mgr->setRule(action(2176), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2176), selectOnly + " and selectionmode='SOLID'", QtxPopupMgr::ToggleRule); + mgr->insert( action(2177), selectolnyId, -1); //Compound + mgr->setRule(action(2177), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2177), selectOnly + " and selectionmode='COMPOUND'", QtxPopupMgr::ToggleRule); + mgr->insert( separator(), selectolnyId, -1); + mgr->insert( action(2178), selectolnyId, -1); //Clear selection filter + mgr->setRule(action(2178), selectOnly, QtxPopupMgr::VisibleRule); + mgr->setRule(action(2178), selectOnly + " and selectionmode='ALL'", QtxPopupMgr::ToggleRule); + mgr->insert( action( 213 ), -1, -1 ); // display only + mgr->setRule( action( 213 ), rule.arg( types ).arg( "true" ), QtxPopupMgr::VisibleRule ); + mgr->insert( separator(), -1, -1 ); + + mgr->hide( mgr->actionId( action( myEraseAll ) ) ); +} //======================================================================= -// function : GeometryGUI::Deactivate() -// purpose : Called when GEOM module is deactivated [ static ] +// function : GeometryGUI::activateModule() +// purpose : Called when GEOM module is activated //======================================================================= -void GeometryGUI::Deactivate() +bool GeometryGUI::activateModule( SUIT_Study* study ) { - GeometryGUI* geomGUI = GetGeomGUI(); - GetGeomGUI()->EmitSignalCloseAllDialogs(); + if ( CORBA::is_nil( myComponentGeom ) ) + return false; + + bool res = SalomeApp_Module::activateModule( study ); + + if ( !res ) + return false; + + setMenuShown( true ); + setToolShown( true ); + + connect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ), + this, SLOT( onWindowActivated( SUIT_ViewWindow* ) ) ); + + // Reset actions accelerator keys + //action(111)->setAccel(QKeySequence(CTRL + Key_I)); // Import + //action(121)->setAccel(QKeySequence(CTRL + Key_E)); // Export + action(111)->setEnabled( true ); // Import: CTRL + Key_I + action(121)->setEnabled( true ); // Export: CTRL + Key_E + action( 33)->setEnabled( true ); // Delete: Key_Delete + action(901)->setEnabled( true ); // Rename: Key_F2 + GUIMap::Iterator it; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) - it.data()->Deactivate(); + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) + it.value()->activate( application()->desktop() ); + + LightApp_SelectionMgr* sm = getApp()->selectionMgr(); + + SUIT_ViewManager* vm; + ViewManagerList OCCViewManagers, VTKViewManagers; + + application()->viewManagers( OCCViewer_Viewer::Type(), OCCViewManagers ); + QListIterator itOCC( OCCViewManagers ); + while ( itOCC.hasNext() && (vm = itOCC.next()) ) + myOCCSelectors.append( new GEOMGUI_OCCSelector( ((OCCViewer_ViewManager*)vm)->getOCCViewer(), sm ) ); + + application()->viewManagers( SVTK_Viewer::Type(), VTKViewManagers ); + QListIterator itVTK( VTKViewManagers ); + while ( itVTK.hasNext() && (vm = itVTK.next()) ) + myVTKSelectors.append( new LightApp_VTKSelector( dynamic_cast( vm->getViewModel() ), sm ) ); + + //NPAL 19674 + SALOME_ListIO selected; + sm->selectedObjects( selected ); + sm->clearSelected(); + + // disable OCC selectors + getApp()->selectionMgr()->setEnabled( false, OCCViewer_Viewer::Type() ); + QListIterator itOCCSel( myOCCSelectors ); + while ( itOCCSel.hasNext() ) + if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() ) + sr->setEnabled(true); + + // disable VTK selectors + getApp()->selectionMgr()->setEnabled( false, SVTK_Viewer::Type() ); + QListIterator itVTKSel( myVTKSelectors ); + while ( itVTKSel.hasNext() ) + if ( LightApp_VTKSelector* sr = itVTKSel.next() ) + sr->setEnabled(true); + + sm->setSelectedObjects( selected, true ); //NPAL 19674 + + return true; } -//================================================================================= -// function : GeometryGUI::DefinePopup() -// purpose : Called from desktop to define popup menu [static] -//================================================================================= -void GeometryGUI::DefinePopup(QString& theContext, QString& theParent, QString& theObject) + +//======================================================================= +// function : GeometryGUI::deactivateModule() +// purpose : Called when GEOM module is deactivated +//======================================================================= +bool GeometryGUI::deactivateModule( SUIT_Study* study ) { - GeometryGUI* geomGUI = GetGeomGUI(); - QAD_Study* ActiveStudy = QAD_Application::getDesktop()->getActiveStudy(); - SALOME_Selection* Sel = SALOME_Selection::Selection(ActiveStudy->getSelection()); + setMenuShown( false ); + setToolShown( false ); - theObject = ""; - theContext = ""; + disconnect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ), + this, SLOT( onWindowActivated( SUIT_ViewWindow* ) ) ); - if ( theParent == "Viewer" ) { - if ( Sel->IObjectCount() == 0 ) - theContext = "NothingSelected"; - } + EmitSignalCloseAllDialogs(); - if ( Sel->IObjectCount() == 1 ) { - Handle(SALOME_InteractiveObject) IO = Sel->firstIObject(); - if( IO->hasEntry() ) { - SALOMEDS::SObject_var sobj = ActiveStudy->getStudyDocument()->FindObjectID( IO->getEntry() ); - if ( !sobj->_is_nil() ) { - SALOMEDS::SComponent_var scomp = sobj->GetFatherComponent(); - if ( !strcmp(scomp->GetID(), IO->getEntry() ) ) { - // component is selected - theObject = "Component"; - } - else { - GEOM::GEOM_Object_var aGObj = GEOM::GEOM_Object::_narrow( sobj->GetObject() ); - if ( !CORBA::is_nil( aGObj ) ) { - switch( aGObj->GetType() ) { - case GEOM_GROUP: - theObject = "Group"; - break; - default: - theObject = "Shape"; - break; - } - } - } - } - } + GUIMap::Iterator it; + for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) + it.value()->deactivate(); + + // Unset actions accelerator keys + //action(111)->setAccel(QKeySequence()); // Import + //action(121)->setAccel(QKeySequence()); // Export + action(111)->setEnabled( false ); // Import: CTRL + Key_I + action(121)->setEnabled( false ); // Export: CTRL + Key_E + action( 33)->setEnabled( false ); // Delete: Key_Delete + action(901)->setEnabled( false ); // Rename: Key_F2 + + qDeleteAll(myOCCSelectors); + myOCCSelectors.clear(); + getApp()->selectionMgr()->setEnabled( true, OCCViewer_Viewer::Type() ); + + qDeleteAll(myVTKSelectors); + myVTKSelectors.clear(); + getApp()->selectionMgr()->setEnabled( true, SVTK_Viewer::Type() ); + + return SalomeApp_Module::deactivateModule( study ); +} + +//======================================================================= +// function : GeometryGUI::BuildPresentation() +// purpose : +//======================================================================= +void GeometryGUI::BuildPresentation( const Handle(SALOME_InteractiveObject)& io, SUIT_ViewWindow* win ) +{ + //GEOM_Displayer().Display( io, false, win ); +} + +//======================================================================= +// function : onWindowActivated() +// purpose : update menu items' status - disable non-OCC-viewer-compatible actions +//======================================================================= +void GeometryGUI::onWindowActivated( SUIT_ViewWindow* win ) +{ + if ( !win ) + return; + + const bool ViewOCC = ( win->getViewManager()->getType() == OCCViewer_Viewer::Type() ); + const bool ViewVTK = ( win->getViewManager()->getType() == SVTK_Viewer::Type() ); + + // disable non-OCC viewframe menu commands +// action( 404 )->setEnabled( ViewOCC ); // SKETCHER + action( 603 )->setEnabled( ViewOCC ); // SuppressFace + action( 604 )->setEnabled( ViewOCC ); // SuppressHole + action( 606 )->setEnabled( ViewOCC ); // CloseContour + action( 607 )->setEnabled( ViewOCC ); // RemoveInternalWires + action( 608 )->setEnabled( ViewOCC ); // AddPointOnEdge +// action( 609 )->setEnabled( ViewOCC ); // Free boundaries + + action( 800 )->setEnabled( ViewOCC ); // Create Group + action( 801 )->setEnabled( ViewOCC ); // Edit Group + + action( 9998 )->setEnabled( ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION +} + +void GeometryGUI::windows( QMap& mappa ) const +{ + mappa.insert( SalomeApp_Application::WT_ObjectBrowser, Qt::LeftDockWidgetArea ); + mappa.insert( SalomeApp_Application::WT_PyConsole, Qt::BottomDockWidgetArea ); +} + +void GeometryGUI::viewManagers( QStringList& lst ) const +{ + lst.append( OCCViewer_Viewer::Type() ); +} + +void GeometryGUI::onViewManagerAdded( SUIT_ViewManager* vm ) +{ + if ( vm->getType() == OCCViewer_Viewer::Type() ) + { + qDebug( "connect" ); + connect( vm, SIGNAL( keyPress ( SUIT_ViewWindow*, QKeyEvent* ) ), + this, SLOT( OnKeyPress( SUIT_ViewWindow*, QKeyEvent* ) ) ); + connect( vm, SIGNAL( mousePress( SUIT_ViewWindow*, QMouseEvent* ) ), + this, SLOT( OnMousePress( SUIT_ViewWindow*, QMouseEvent* ) ) ); + connect( vm, SIGNAL( mouseMove ( SUIT_ViewWindow*, QMouseEvent* ) ), + this, SLOT( OnMouseMove( SUIT_ViewWindow*, QMouseEvent* ) ) ); + + + LightApp_SelectionMgr* sm = getApp()->selectionMgr(); + myOCCSelectors.append( new GEOMGUI_OCCSelector( ((OCCViewer_ViewManager*)vm)->getOCCViewer(), sm ) ); + + // disable OCC selectors + getApp()->selectionMgr()->setEnabled( false, OCCViewer_Viewer::Type() ); + QListIterator itOCCSel( myOCCSelectors ); + while ( itOCCSel.hasNext() ) + if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() ) + sr->setEnabled(true); + } + else if ( vm->getType() == SVTK_Viewer::Type() ) + { + LightApp_SelectionMgr* sm = getApp()->selectionMgr(); + myVTKSelectors.append( new LightApp_VTKSelector( dynamic_cast( vm->getViewModel() ), sm ) ); + + // disable VTK selectors + getApp()->selectionMgr()->setEnabled( false, SVTK_Viewer::Type() ); + QListIterator itVTKSel( myVTKSelectors ); + while ( itVTKSel.hasNext() ) + if ( LightApp_VTKSelector* sr = itVTKSel.next() ) + sr->setEnabled(true); } } -//================================================================================= -// function : GeometryGUI::CustomPopup() -// purpose : Called from desktop to create popup menu [static] -//================================================================================= -bool GeometryGUI::CustomPopup(QAD_Desktop* parent, QPopupMenu* popup, const QString& theContext, - const QString& theParent, const QString& theObject) -{ - GeometryGUI* geomGUI = GetGeomGUI(); - - // Deactivate any non modal dialog box to get the neutral point - geomGUI->EmitSignalDeactivateDialog(); - QAD_Study* anActiveStudy = parent->getActiveStudy(); - QAD_StudyFrame* aStudyFrame = anActiveStudy->getActiveStudyFrame(); - QAD_ViewFrame* aViewFrame = aStudyFrame->getRightFrame()->getViewFrame(); - SALOME_Selection* Sel = SALOME_Selection::Selection(anActiveStudy->getSelection()); - QString parentComponent = ((SALOMEGUI_Desktop*)parent)->getComponentFromSelection(); - bool isOCCViewer = aViewFrame->getTypeView() == VIEW_OCC; - bool isVTKViewer = aViewFrame->getTypeView() == VIEW_VTK; - int aDisplayMode = 0; - QString objectName; - - if ( aViewFrame->getTypeView() == VIEW_OCC ) - aDisplayMode = ((OCCViewer_ViewFrame*)aViewFrame)->getViewer()->getAISContext()->DisplayMode(); - else if ( aViewFrame->getTypeView() == VIEW_VTK ) - aDisplayMode = ((VTKViewer_ViewFrame*)aViewFrame)->getRWInteractor()->GetDisplayMode(); - - int nbSel = Sel->IObjectCount(); - - if( nbSel == 0 ) { - ////// NOTHING SELECTED - popup->clear(); - } - else if ( nbSel == 1 ) { - ////// SINGLE OBJECT SELECTION - if ( parentComponent != parent->getActiveComponent() ) { - ////// selected object does not belong to GEOM module: - // remove all commands except Display/Erase... - while ( 1 ) { - int id = popup->idAt( 0 ); - if ( id <= QAD_TopLabel_Popup_ID ) - popup->removeItemAt( 0 ); - else +void GeometryGUI::onViewManagerRemoved( SUIT_ViewManager* vm ) +{ + SUIT_ViewModel* viewer = vm->getViewModel(); + if ( vm->getType() == OCCViewer_Viewer::Type() ) + { + QListIterator itOCCSel( myOCCSelectors ); + while ( itOCCSel.hasNext() ) + if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() ) + if ( sr->viewer() == viewer ) + { + delete myOCCSelectors.takeAt( myOCCSelectors.indexOf( sr ) ); break; - } - } - else { - ////// selected object belong to the GEOM module - // get interactive object - Handle(SALOME_InteractiveObject) IObject = Sel->firstIObject(); - objectName = IObject->getName(); - // if object has entry get SObject - SALOMEDS::SObject_var SO; - if ( IObject->hasEntry() ) - SO = anActiveStudy->getStudyDocument()->FindObjectID( IObject->getEntry() ); - - if ( theObject == "Component" ) { - ////// menu for component - popup->removeItem( QAD_DisplayOnly_Popup_ID ); - if ( !isOCCViewer && !isVTKViewer ) { - popup->removeItem( QAD_Display_Popup_ID ); - popup->removeItem( QAD_Erase_Popup_ID ); - } - } - else { - ////// not component (should be shape) - if ( IObject->hasEntry() ) /////// VSR : TO BE REMOVED - popup->removeItem( 804 ); // "Add in Study" - - // Here could be analysis of the geom shape's type - // ... // - - SALOMEDS::GenericAttribute_var aTmpAttr; - if( SO->_is_nil() || SO->GetFatherComponent()->FindAttribute( aTmpAttr, "AttributeIOR") ) - popup->removeItem( 9024 ); // "Open" /////// VSR : TO BE REMOVED - - if ( !isOCCViewer && theParent == "ObjectBrowser" ) { - if ( theObject == "Shape" ) - popup->removeItem( 800 ); // Create Group - else if ( theObject == "Group" ) - popup->removeItem( 801 ); // Edit Group - } - - if ( isOCCViewer || isVTKViewer ) { - ////// current viewer is OCC or VTK - SALOME_Prs* prs = aViewFrame->CreatePrs( IObject->getEntry() ); - if ( aViewFrame->isVisible( IObject ) ) { - ////// object is already displayed in the viewer - popup->removeItem( QAD_Display_Popup_ID ); - if ( isOCCViewer ) { - ////// OCC viewer only - OCCViewer_Prs* occPrs = dynamic_cast( prs ); - if ( occPrs && !occPrs->IsNull() ) { - AIS_ListOfInteractive ioList; - occPrs->GetObjects( ioList ); - QMenuItem* mi = popup->findItem( 803 ); - if ( mi && mi->popup() ) { - if ( ioList.First()->DisplayMode() == 0 ) - mi->popup()->setItemChecked( 80311, true ); // "Wireframe" - else if ( ioList.First()->DisplayMode() == 1 ) - mi->popup()->setItemChecked( 80312, true ); // "Shading" - else if ( ioList.First()->DisplayMode() < 0 ) - mi->popup()->setItemChecked( aDisplayMode == 0 ? 80311 : 80312 , true ); // "Wireframe" or "Shading" - } - } - } - else { - ////// VTK viewer only - popup->removeItem( 8034 ); // "Isos" - VTKViewer_Prs* vtkPrs = dynamic_cast( prs ); - if ( vtkPrs && !vtkPrs->IsNull() ) { - vtkActorCollection* actorList = vtkPrs->GetObjects(); - actorList->InitTraversal(); - SALOME_Actor* ac = SALOME_Actor::SafeDownCast( actorList->GetNextActor() ); - QMenuItem* mi = popup->findItem( 803 ); - if ( ac && mi && mi->popup() ) { - if ( ac->getDisplayMode() == 0 ) - mi->popup()->setItemChecked( 80311, true ); // "Wireframe" - else if ( ac->getDisplayMode() == 1 ) - mi->popup()->setItemChecked( 80312, true ); // "Shading" - else - mi->popup()->setItemChecked( aDisplayMode == 0 ? 80311 : 80312 , true ); // "Wireframe" or "Shading" - } - } - } - } - else { - ////// object is not yet displayed in the viewer - popup->removeItem( 803 ); // "Display Mode" - popup->removeItem( 8032 ); // "Color" - popup->removeItem( 8033 ); // "Transparency" - popup->removeItem( 8034 ); // "Isos" - popup->removeItem( QAD_Erase_Popup_ID ); - } - delete prs; - } - else { - ////// other viewer type (neither OCC nor VTK) - popup->removeItem( 803 ); // "Display Mode" - popup->removeItem( 8032 ); // "Color" - popup->removeItem( 8033 ); // "Transparency" - popup->removeItem( 8034 ); // "Isos" - popup->removeItem( QAD_Display_Popup_ID ); - popup->removeItem( QAD_DisplayOnly_Popup_ID ); - popup->removeItem( QAD_Erase_Popup_ID ); } - } - } } - else { - ////// MULTIPLE SELECTION - if ( parentComponent != parent->getActiveComponent() ) { - ////// not GEOM module objects or objects belong to different modules - // remove all commands except Display/Erase... - while ( 1 ) { - int id = popup->idAt( 0 ); - if ( id <= QAD_TopLabel_Popup_ID ) - popup->removeItemAt( 0 ); - else + if ( vm->getType() == SVTK_Viewer::Type() ) + { + QListIterator itVTKSel( myVTKSelectors ); + while ( itVTKSel.hasNext() ) + if ( LightApp_VTKSelector* sr = itVTKSel.next() ) + if ( sr->viewer() == viewer ) + { + delete myVTKSelectors.takeAt( myVTKSelectors.indexOf( sr ) ); break; - } - if ( parentComponent.isNull() ) { - ////// objects belong to different modules - popup->removeItem(QAD_Display_Popup_ID); - popup->removeItem(QAD_DisplayOnly_Popup_ID); - popup->removeItem(QAD_Erase_Popup_ID); - } - else { - objectName = tr( "GEOM_MEN_POPUP_NAME" ).arg( nbSel ); - } - } - else { - ////// all selected objects belong to GEOM module - popup->removeItem( 901 ); // "Rename" - - SALOME_ListIteratorOfListIO It( Sel->StoredIObjects() ); - bool isComponent = false; - bool needOpen = false; - bool needDisplay = false; - bool needErase = false; - int needToPublish = 0; - - for( ;It.More();It.Next() ) { - Handle(SALOME_InteractiveObject) anIObject = It.Value(); - - if ( aViewFrame->isVisible( anIObject ) ) - needErase = true; - else - needDisplay = true; - - if( anIObject->hasEntry() ) { - needToPublish = -1; /////// VSR : TO BE REMOVED - SALOMEDS::SObject_var obj = anActiveStudy->getStudyDocument()->FindObjectID( anIObject->getEntry() ); - SALOMEDS::GenericAttribute_var aTmpAttr; - if ( !obj->_is_nil() && !obj->GetFatherComponent()->FindAttribute( aTmpAttr, "AttributeIOR" ) ) - needOpen = true; /////// VSR : TO BE REMOVED - if ( !obj->_is_nil() && QString( obj->GetID() ) == QString( obj->GetFatherComponent()->GetID() ) ) - isComponent = true; - } - else { - if ( needToPublish != -1 ) needToPublish = 1; } - } - if( needOpen || ( !isOCCViewer && !isVTKViewer ) ) { - ////// Data is not loaded yet or current viewer is neither OCC nor VTK - popup->removeItem( 803 ); // "Display Mode" - popup->removeItem( 8032 ); // "Color" - popup->removeItem( 8033 ); // "Transparency" - popup->removeItem( 8034 ); // "Isos" - popup->removeItem( 804 ); // "Add in Study" - popup->removeItem( QAD_DisplayOnly_Popup_ID ); - popup->removeItem( QAD_Display_Popup_ID ); - popup->removeItem( QAD_Erase_Popup_ID ); - } - else { - popup->removeItem( 9024 ); // "Open" - if ( needToPublish <= 0 ) - popup->removeItem( 804 ); // "Add in Study" - - if( isComponent ) { - popup->removeItem( 803 ); // "Display Mode" - popup->removeItem( 8032 ); // "Color" - popup->removeItem( 8033 ); // "Transparency" - popup->removeItem( 8034 ); // "Isos" - popup->removeItem( QAD_DisplayOnly_Popup_ID ); - } - - if ( !needDisplay ) - popup->removeItem( QAD_Display_Popup_ID ); - if ( !needErase ) - popup->removeItem( QAD_Erase_Popup_ID ); - if ( !isOCCViewer ) - popup->removeItem( 8034 ); // "Isos" - } - } - } - - // check popup for unnecessary separators - QAD_Tools::checkPopup( popup ); - // find popup menu's TopLabel item (with title) - int topItem = popup->indexOf( QAD_TopLabel_Popup_ID ); - if ( topItem >= 0 ) { - // remove popup menu's title item - popup->removeItem( QAD_TopLabel_Popup_ID ); - if ( theParent == "Viewer" && !objectName.isEmpty() && popup->count() > 0 ) { - // set bold font for popup menu's title - QFont f = popup->font(); f.setBold( TRUE ); - popup->removeItem( QAD_TopLabel_Popup_ID ); - popup->insertItem( new CustomItem( objectName, f ), QAD_TopLabel_Popup_ID, topItem ); - } } +} - return false; +QString GeometryGUI::engineIOR() const +{ + if ( !CORBA::is_nil( GetGeomGen() ) ) + return QString( getApp()->orb()->object_to_string( GetGeomGen() ) ); + return ""; } -//================================================================================= -// function : GeometryGUI::ActiveStudyChanged() -// purpose : static -//================================================================================= -bool GeometryGUI::ActiveStudyChanged(QAD_Desktop* parent) +LightApp_Selection* GeometryGUI::createSelection() const { - GeometryGUI* geomGUI = GetGeomGUI(); - QAD_Study* ActiveStudy = parent->getActiveStudy(); - QMenuBar* Mb = QAD_Application::getDesktop()->getMainMenuBar(); - int DisplayMode = 0; - bool ViewOCC = false; + return new GEOMGUI_Selection(); +} - if( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_OCC ) { - OCCViewer_Viewer3d* v3d = ((OCCViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewer(); - Handle(AIS_InteractiveContext) ic = v3d->getAISContext(); - DisplayMode = ic->DisplayMode(); - ViewOCC = true; - } - else if( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_VTK ) { - VTKViewer_RenderWindowInteractor* myRenderInter = ((VTKViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRWInteractor(); - DisplayMode = myRenderInter->GetDisplayMode(); +void GeometryGUI::contextMenuPopup( const QString& client, QMenu* menu, QString& title ) +{ + SalomeApp_Module::contextMenuPopup( client, menu, title ); + SALOME_ListIO lst; + getApp()->selectionMgr()->selectedObjects( lst ); + if ( ( client == "OCCViewer" || client == "VTKViewer" ) && lst.Extent() == 1 ) { + Handle(SALOME_InteractiveObject) io = lst.First(); + SalomeApp_Study* appStudy = dynamic_cast( application()->activeStudy() ); + _PTR(Study) study = appStudy->studyDS(); + _PTR(SObject) obj = study->FindObjectID( io->getEntry() ); + if ( obj ) + title = QString( obj->GetName().c_str() ); } +} - if( DisplayMode == 1 ) - Mb->changeItem( 211, tr( "GEOM_MEN_WIREFRAME" ) ); - else - Mb->changeItem( 211, tr( "GEOM_MEN_SHADING" ) ); +void GeometryGUI::createPreferences() +{ + int tabId = addPreference( tr( "PREF_TAB_SETTINGS" ) ); - //Mb->setItemEnabled( 404, ViewOCC ); // SKETCHER - Mb->setItemEnabled( 603, ViewOCC ); // SuppressFace - Mb->setItemEnabled( 604, ViewOCC ); // SuppressHole - Mb->setItemEnabled( 606, ViewOCC ); // CloseContour - Mb->setItemEnabled( 413, ViewOCC ); // Isos Settings - Mb->setItemEnabled( 800, ViewOCC ); // Create Group - Mb->setItemEnabled( 801, ViewOCC ); // Edit Group - Mb->setItemEnabled(9998, ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION + int genGroup = addPreference( tr( "PREF_GROUP_GENERAL" ), tabId ); + setPreferenceProperty( genGroup, "columns", 2 ); - geomGUI->EmitSignalCloseAllDialogs(); + int dispmode = addPreference( tr( "PREF_DISPLAY_MODE" ), genGroup, + LightApp_Preferences::Selector, + "Geometry", "display_mode" ); - // PAL5356: update VTK selection - ::UpdateVtkSelection( parent ); + addPreference( tr( "PREF_SHADING_COLOR" ), genGroup, + LightApp_Preferences::Color, "Geometry", "shading_color" ); + + addPreference( tr( "PREF_WIREFRAME_COLOR" ), genGroup, + LightApp_Preferences::Color, "Geometry", "wireframe_color" ); + + addPreference( tr( "PREF_FREE_BOUND_COLOR" ), genGroup, + LightApp_Preferences::Color, "Geometry", "free_bound_color" ); + + addPreference( tr( "PREF_LINE_COLOR"), genGroup, + LightApp_Preferences::Color, "Geometry", "line_color" ); + + addPreference( tr( "PREF_POINT_COLOR"), genGroup, + LightApp_Preferences::Color, "Geometry", "point_color" ); + + addPreference( tr( "PREF_ISOS_COLOR" ), genGroup, + LightApp_Preferences::Color, "Geometry", "isos_color" ); + + int step = addPreference( tr( "PREF_STEP_VALUE" ), genGroup, + LightApp_Preferences::IntSpin, "Geometry", "SettingsGeomStep" ); + + int VertexGroup = addPreference( tr( "PREF_GROUP_VERTEX" ), tabId ); + setPreferenceProperty( VertexGroup, "columns", 2 ); + + int typeOfMarker = addPreference( tr( "PREF_TYPE_OF_MARKER" ), VertexGroup, + LightApp_Preferences::Selector, "Geometry", "type_of_marker" ); + + int markerScale = addPreference( tr( "PREF_MARKER_SCALE" ), VertexGroup, + LightApp_Preferences::DblSpin, "Geometry", "marker_scale" ); + + // Set property for default display mode + QStringList aModesList; + aModesList.append( tr("MEN_WIREFRAME") ); + aModesList.append( tr("MEN_SHADING") ); + + QList anIndexesList; + anIndexesList.append(0); + anIndexesList.append(1); + + setPreferenceProperty( dispmode, "strings", aModesList ); + setPreferenceProperty( dispmode, "indexes", anIndexesList ); + + // Set property for step value for spinboxes + setPreferenceProperty( step, "min", 1 ); + setPreferenceProperty( step, "max", 10000 ); + setPreferenceProperty( step, "precision", 3 ); + + // Set property for type of vertex marker + QStringList aTypeOfMarkerList; + QList anTypeOfMarkerIndexesList; + + aTypeOfMarkerList.append( tr("TOM_PLUS") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_PLUS); + + aTypeOfMarkerList.append( tr("TOM_POINT") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_POINT); + + aTypeOfMarkerList.append( tr("TOM_STAR") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_STAR); + + aTypeOfMarkerList.append( tr("TOM_O") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_O); + + aTypeOfMarkerList.append( tr("TOM_X") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_X); + + aTypeOfMarkerList.append( tr("TOM_O_POINT") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_O_POINT); + + aTypeOfMarkerList.append( tr("TOM_O_PLUS") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_O_PLUS); + + aTypeOfMarkerList.append( tr("TOM_O_STAR") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_O_STAR); + + aTypeOfMarkerList.append( tr("TOM_O_X") ); + anTypeOfMarkerIndexesList.append(Aspect_TOM_O_X); + + + setPreferenceProperty( typeOfMarker, "strings", aTypeOfMarkerList ); + setPreferenceProperty( typeOfMarker, "indexes", anTypeOfMarkerIndexesList ); + + // Set property for Vertex Marker scale + setPreferenceProperty( markerScale, "min", 1. ); + setPreferenceProperty( markerScale, "max", 7. ); + setPreferenceProperty( markerScale, "precision", 0.01 ); + setPreferenceProperty( markerScale, "step", 0.5 ); - bool bOk = true; - GUIMap::Iterator it; - for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it ) - bOk = bOk && it.data()->ActiveStudyChanged( parent ); - return bOk; } -//======================================================================= -// function : GeometryGUI::BuildPresentation() -// purpose : static -//======================================================================= -void GeometryGUI::BuildPresentation( const Handle(SALOME_InteractiveObject)& theIO, - QAD_ViewFrame* theViewFrame ) +void GeometryGUI::preferencesChanged( const QString& section, const QString& param ) { - GEOM_Displayer().Display( theIO, false, theViewFrame ); + if (section == "Geometry") { + SUIT_ResourceMgr* aResourceMgr = SUIT_Session::session()->resourceMgr(); + if (param == QString("SettingsGeomStep")) { + double spin_step = aResourceMgr->doubleValue(section, param, 100.); + EmitSignalDefaultStepValueChanged(spin_step); + } + } } -void GeometryGUI::SupportedViewType(int* buffer, int bufferSize) +LightApp_Displayer* GeometryGUI::displayer() +{ + if( !myDisplayer ) + myDisplayer = new GEOM_Displayer( dynamic_cast( getApp()->activeStudy() ) ); + return myDisplayer; +} + +void GeometryGUI::setLocalSelectionMode(const int mode) +{ + myLocalSelectionMode = mode; +} +int GeometryGUI::getLocalSelectionMode() const { - if(!buffer || !bufferSize) return; - buffer[0] = (int)VIEW_OCC; - if (--bufferSize) buffer[1] = (int)VIEW_VTK; + return myLocalSelectionMode; }