X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=resources%2FStdMeshers.xml.in;h=cf8146f54948fb0901589684bb9db9a722ffa234;hb=80fe1ddefc561a7a571ac08807f7d173f45d8080;hp=d6f6527b673c12940f03a821817b69d3c24a6ce8;hpb=f7aba4830d53719b963fdb7fccc98b760fdef2d1;p=modules%2Fsmesh.git

diff --git a/resources/StdMeshers.xml.in b/resources/StdMeshers.xml.in
index d6f6527b6..cf8146f54 100644
--- a/resources/StdMeshers.xml.in
+++ b/resources/StdMeshers.xml.in
@@ -1,7 +1,7 @@
 <?xml version='1.0' encoding='us-ascii'?>
 <!DOCTYPE meshers PUBLIC "" "desktop.dtd">
 <!--
-  Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -9,7 +9,7 @@
   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
-  version 2.1 of the License.
+  version 2.1 of the License, or (at your option) any later version.
 
   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -89,12 +89,14 @@
                 label-id ="Propagation of 1D Hyp. on Opposite Edges"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"
+                context  ="LOCAL"
                 auxiliary="true"/>
 
     <hypothesis type     ="PropagOfDistribution"
                 label-id ="Propagation of Node Distribution on Opposite Edges"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1"
+                context  ="LOCAL"
                 auxiliary="true"/>
 
     <hypothesis type     ="AutomaticLength"
@@ -117,6 +119,7 @@
                 label-id ="Quadratic Mesh"
                 icon-id  ="mesh_algo_quad.png"
                 dim      ="1"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementArea"
@@ -128,6 +131,7 @@
                 label-id ="Not Conform Mesh Allowed"
                 icon-id  ="mesh_hypo_length.png"
                 dim      ="1,2,3"
+                context  ="GLOBAL"
                 auxiliary="true"/>                
 
     <hypothesis type     ="MaxElementVolume"
@@ -200,6 +204,7 @@
     <hypothesis type     ="CartesianParameters3D"
                 label-id ="Body Fitting Parameters"
                 icon-id  ="mesh_hypo_length.png"
+                context  ="GLOBAL"
                 dim      ="3"/>
 
   </hypotheses>
@@ -211,6 +216,7 @@
 	       icon-id  ="mesh_algo_regular.png"
                hypos    ="SegmentLengthAroundVertex"
                output   ="VERTEX"
+               need-hyp ="true"
                dim      ="0"/>
 
     <algorithm type     ="Regular_1D"
@@ -220,6 +226,7 @@
                opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>Regular_1D=Segment()</algo>
@@ -229,7 +236,7 @@
         <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
-        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
+        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection(),SetGrading())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
@@ -245,6 +252,7 @@
                opt-hypos="Propagation,PropagOfDistribution,QuadraticMesh"
                input    ="VERTEX"
                output   ="EDGE"
+               need-hyp ="true"
                dim      ="1">
       <python-wrap>
         <algo>CompositeSegment_1D=Segment(algo=smeshBuilder.COMPOSITE)</algo>
@@ -254,7 +262,7 @@
         <hypo>GeometricProgression=GeometricProgression(SetStartLength(),SetCommonRatio(),SetReversedEdges())</hypo>
         <hypo>StartEndLength=StartEndLength(SetStartLength(),SetEndLength(),SetReversedEdges())</hypo>
         <hypo>Deflection1D=Deflection1D(SetDeflection())</hypo>
-        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection())</hypo>
+        <hypo>Adaptive1D=Adaptive(SetMinSize(),SetMaxSize(),SetDeflection(),SetGrading())</hypo>
         <hypo>AutomaticLength=AutomaticLength(SetFineness())</hypo>
         <hypo>FixedPoints1D=FixedPoints1D(SetPoints(),SetNbSegments(),SetReversedEdges())</hypo>
         <hypo>Propagation=Propagation()</hypo>
@@ -298,7 +306,7 @@
                dim      ="2">
       <python-wrap>
         <algo>Quadrangle_2D=Quadrangle(algo=smeshBuilder.QUADRANGLE)</algo>
-        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex())</hypo>
+        <hypo>QuadrangleParams=QuadrangleParameters(SetQuadType(),SetTriaVertex(),SetEnforcedNodes(1),SetEnforcedNodes(2))</hypo>
         <hypo>ViscousLayers2D=ViscousLayers2D(SetTotalThickness(),SetNumberLayers(),SetStretchFactor(),SetIgnoreEdges())</hypo>
       </python-wrap>
     </algorithm>
@@ -322,6 +330,7 @@
                icon-id ="mesh_algo_regular.png"
                hypos   ="ProjectionSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Projection_1D=Projection1D()</algo>
@@ -335,6 +344,7 @@
                input   ="EDGE"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_2D=Projection2D()</algo>
@@ -347,6 +357,7 @@
                icon-id ="mesh_algo_quad.png"
                hypos   ="ProjectionSource2D"
                output  ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="2">
       <python-wrap>
         <algo>Projection_1D2D=Projection1D2D()</algo>
@@ -359,6 +370,7 @@
                icon-id ="mesh_algo_hexa.png"
                hypos   ="ProjectionSource3D"
                input   ="QUAD,TRIA"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>Projection_3D=Projection3D()</algo>
@@ -367,10 +379,11 @@
     </algorithm>
 
     <algorithm type    ="Import_1D"
-               label-id="Use Existing 1D Elements"
+               label-id="Import 1D Elements from Another Mesh"
                icon-id ="mesh_algo_regular.png"
                hypos   ="ImportSource1D"
                output  ="EDGE"
+               need-hyp="true"
                dim     ="1">
       <python-wrap>
         <algo>Import_1D=UseExisting1DElements()</algo>
@@ -379,11 +392,12 @@
     </algorithm>
 
     <algorithm type             ="Import_1D2D"
-               label-id         ="Use Existing 2D Elements"
+               label-id         ="Import 1D-2D Elements from Another Mesh"
                icon-id          ="mesh_algo_quad.png"
                hypos            ="ImportSource2D"
                output           ="QUAD,TRIA"
                support-submeshes="false"
+               need-hyp         ="true"
                dim              ="2">
       <python-wrap>
         <algo>Import_1D2D=UseExisting2DElements()</algo>
@@ -408,6 +422,7 @@
                hypos   ="NumberOfLayers, LayerDistribution"
                input   ="QUAD,TRIA"
                output  ="HEXA,PENTA,OCTA,POLYHEDRON"
+               need-hyp="true"
                dim     ="3">
       <python-wrap>
         <algo>RadialPrism_3D=Prism('RadialPrism_3D')</algo>
@@ -416,7 +431,7 @@
     </algorithm>
 
     <algorithm type    ="UseExisting_1D"
-               label-id="Use Existing Edges"
+               label-id="Use Edges to be Created Manually"
                icon-id ="mesh_algo_regular.png"
                input   ="VERTEX"
                output  ="EDGE"
@@ -427,7 +442,7 @@
     </algorithm>
 
     <algorithm type    ="UseExisting_2D"
-               label-id="Use Existing Faces"
+               label-id="Use Faces to be Created Manually"
                icon-id ="mesh_algo_quad.png"
                input   ="EDGE"
                output  ="QUAD,TRIA"
@@ -456,6 +471,8 @@
                hypos            ="CartesianParameters3D"
                support-submeshes="false"
                output           ="HEXA"
+               need-hyp         ="true"
+               context          ="GLOBAL"
                dim              ="3">
       <python-wrap>
         <algo>Cartesian_3D=BodyFitted()</algo>