X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=doc%2Fsalome%2Fgui%2FSMESH%2Finput%2Fextrusion.doc;h=96da45d43f1c7610f36ca0fae33714c044746b2f;hb=5504d02a2237b17b8459bcd3b1fb2a89468598cd;hp=af390a4b1c8f112d3b5c5e10d0974452292a2914;hpb=2e144ad6b9fb3a0f1586772afc880714d72fe1e9;p=modules%2Fsmesh.git
diff --git a/doc/salome/gui/SMESH/input/extrusion.doc b/doc/salome/gui/SMESH/input/extrusion.doc
index af390a4b1..96da45d43 100644
--- a/doc/salome/gui/SMESH/input/extrusion.doc
+++ b/doc/salome/gui/SMESH/input/extrusion.doc
@@ -23,10 +23,10 @@ elements is extruded into a corresponding type of result elements:
When 2D elements are extruded, in addition to 3D elements segments are
-created on ribs of the result 3D mesh. Free edges of input 2D elements
+created on the ribs of the resulting 3D mesh. Free edges of input 2D elements
generate logically horizontal rib segments. Logically vertical rib
-segments are generated from nodes belonging to a sole input 2D element
-(a figure below illustrates this rule).
+segments are generated from the nodes belonging to a sole input 2D element
+(the figure below illustrates this rule).
\image html extru_rib_segs.png "Two triangles extruded: no vertical rib segments generated from nodes #2 and #3 as they are shared by both triangles"
@@ -48,6 +48,11 @@ The following dialog will appear:
In this dialog:
+ - Use \a Selection button to specify what you are going to
+ select at a given moment, \b Nodes, \b Edges or \b Faces.
+ \image html image120.png
+ "Selection" button
+
- Specify \b Nodes, \b Edges and \b Faces, which will be extruded, by one
of following means:
@@ -63,30 +68,30 @@ The following dialog will appear:
the \ref filtering_elements "Selection filters" page.
+
If the Extrusion to Distance radio button is selected
- - specify the translation vector by which the elements will be extruded.
+
+ - specify the translation vector by which the elements will
+ be extruded.
+
-
-
-\image html extrusionalongaline2.png
If the Extrusion Along Vector radio button is selected
+\image html extrusionalongaline2.png
- - specify the coordinates of the \b Vector along which the elements
+
- specify the components of the \b Vector along which the elements
will be extruded, either directly or by selecting the mesh face (the
normal to the face will define the vector),
- specify the \b Distance of extrusion along the vector (it can
be negative).
-
-\image html extrusionalongaline3.png
-
If the Extrusion By Normal radio button is selected,
every node of the selected faces is extruded along the \a average
of the \a normal vectors to the faces sharing the node. (Nodes and
edges cannot be extruded in this mode.)
+\image html extrusionalongaline3.png
- Specify the \b Distance of extrusion (it can be negative),
- Use Along average normal check-box to specify along
@@ -123,6 +128,25 @@ The following dialog will appear:
Specify the Number of steps.
+
+ Optionally specify Scale Factors. Each scale factor in
+ the list is applied to nodes of a corresponding extrusion step
+ unless Linear Variation of Scale Factors is checked, is
+ which case the scale factors are spread over all extrusion steps.
+
+ - Scaling Center can be defined either using spin boxes
+ or by picking a node in the Viewer or by picking a geometrical
+ vertex in the Object Browser.
+ - \b Add button adds a scale factor to the list.
+ \image html add.png
+ "Add" button
+
+ - \b Remove button removes selected scale factors from the list.
+ \image html remove.png
+ "Remove" button
+
+
+
If you activate Generate Groups check-box, the result elements
created from selected elements contained in groups will be
included into new groups named by pattern "