X-Git-Url: http://git.salome-platform.org/gitweb/?a=blobdiff_plain;f=doc%2Fsalome%2Fgui%2FSMESH%2Ffiles%2Faspect_ratio.htm;h=d10a24b0103837d76dbd2f100b7266fa87bcc1cb;hb=85b1cfc1f07d0b93d88803c6c0ccadf8f3349719;hp=a79bf0884ccab9effd70c9302aa0681771975322;hpb=57b43b4d010e2d0a1529d3c131bbb9d416e63258;p=modules%2Fsmesh.git diff --git a/doc/salome/gui/SMESH/files/aspect_ratio.htm b/doc/salome/gui/SMESH/files/aspect_ratio.htm index a79bf0884..d10a24b01 100755 --- a/doc/salome/gui/SMESH/files/aspect_ratio.htm +++ b/doc/salome/gui/SMESH/files/aspect_ratio.htm @@ -1,207 +1,212 @@ - - - - -
- The Aspect Ratio
- quality criterion for mesh elements reveals the degree of conformity of
- a mesh element to the regular element of its type (with all edges having
- the same length). The
- criterion can be defined as
where К
- is the considered element of the mesh, hmax is the diameter of the element
- К (i.e. the length of the longest edge), рк is the radius of the sphere
- inscribed in the element K, and a
- is a normalisation value chosen so that QK = 1 when К is an equilateral
- simplex.
- -
The value of QK varies between 1 and +oo and the - closer it is to 1, the better the element К is.
- -The Aspect Ratio - of a triangle 2D element consisting - of 3 nodes is calculated by the formula:
- -
,
- -
where рк is the half perimeter of the - element K and SK is its surface.
- -- -
- -
The Aspect - Ratio of a quadrangle 2D - element consisting of 4 nodes is the worst (i.e. the greatest) value from - all triangles which can be built taking three nodes of the quadrangle. - There are four triangles to consider:
Note, that the Aspect Ratio criterion is - applicable to 2D mesh elements only. For 3D elements we use the Aspect - Ratio 3D criterion.
- -- -
To apply the Aspect Ratio quality criterion to your mesh:
- -- -
1. Display your mesh in the viewer.
- -- -
2. Choose Controls
- > Aspect Ratio or click button in the toolbar.
- Your mesh will be displayed in the viewer with its elements colored according
- to the applied mesh quality control criterion:
- -
- -
See Also - a sample TUI Script of an Aspect - Ratio quality control operation.
- -- - - - + + + + + +
The Aspect Ratio
+ quality criterion for mesh elements reveals the degree of conformity of
+ a mesh element to the regular element of its type (with all edges having
+ the same length). The
+ criterion can be defined as
where К
+ is the considered element of the mesh, hmax is the diameter of the element
+ К (i.e. the length of the longest edge), рк is the radius of the sphere
+ inscribed in the element K, and a
+ is a normalisation value chosen so that QK = 1 when К is an equilateral
+ simplex.
+ +
The value of QK varies between 1 and +oo and the + closer it is to 1, the better the element К is.
+ +The Aspect Ratio + of a triangle 2D element consisting + of 3 nodes is calculated by the formula:
+ +
,
+ +
where рк is the half perimeter of the + element K and SK is its surface.
+ ++ +
+ +
The Aspect + Ratio of a quadrangle 2D + element consisting of 4 nodes is the worst (i.e. the greatest) value from + all triangles which can be built taking three nodes of the quadrangle. + There are four triangles to consider:
Note, that the Aspect Ratio criterion is + applicable to 2D mesh elements only. For 3D elements we use the Aspect + Ratio 3D criterion.
+ ++ +
To apply the Aspect Ratio quality criterion to your mesh:
+ ++ +
1. Display your mesh in the viewer.
+ ++ +
2. Choose Controls
+ > Aspect Ratio or click button in the toolbar.
+ Your mesh will be displayed in the viewer with its elements colored according
+ to the applied mesh quality control criterion:
+ +
+ +
See Also + a sample TUI Script of an Aspect + Ratio quality control operation.
+ ++ + + +