Add copyright header according to request of CEA from 06.06.2017

[modules/shaper.git] / test.squish / suite_STANDALONE / shared / scripts / common.py

diff --git a/test.squish/suite_STANDALONE/shared/scripts/common.py b/test.squish/suite_STANDALONE/shared/scripts/common.py
index f6a53b17c4eda058a4cac12fb112dfde687c850c..ee9e42b01011a3b6184b652cf8738c8d25d8dda4 100644 (file)
--- a/test.squish/suite_STANDALONE/shared/scripts/common.py
+++ b/test.squish/suite_STANDALONE/shared/scripts/common.py
@@ -3,7 +3,7 @@ testSettings.logScreenshotOnFail = True
 
 g_points = {"XY_plane": (320, 320)} # one of the construction planes
 def help_points(name):
-    return g_points[name] 
+    return g_points[name]
 
 def set_defaults():
     waitForObject(":OpenParts*_AppElements_MainWindow").resize(1024, 768)
@@ -22,14 +22,14 @@ def parameter_create(name, expression):
 def part_create():
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Part")
     clickButton(waitForObject(":Operations.New part_AppElements_Button"))
-    
+
 def sketch_create(point, actions):
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Sketch")
     clickButton(waitForObject(":Basic.Sketch_AppElements_Button"))
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point[0], point[1], 0, Qt.LeftButton)
-    
+
     actions()
-    
+
     clickButton(waitForObject(":Sketch.Ok_QToolButton"))
 
 def point_create(point):
@@ -40,7 +40,7 @@ def point_create(point):
     type(waitForObject(":Point.Y:_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Point.Y:_ModuleBase_ParamSpinBox"), point[1])
 
-    clickButton(waitForObject(":Point.property_panel_ok_QToolButton"))       
+    clickButton(waitForObject(":Point.property_panel_ok_QToolButton"))
 
 def line_create(start_point, end_point):
     clickButton(waitForObject(":Basic.Line_AppElements_Button"))
@@ -55,14 +55,14 @@ def line_create(start_point, end_point):
     type(waitForObject(":End point.Y:_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":End point.Y:_ModuleBase_ParamSpinBox"), end_point[1])
 
-    clickButton(waitForObject(":Line.property_panel_ok_QToolButton"))    
+    clickButton(waitForObject(":Line.property_panel_ok_QToolButton"))
 
 def line_create_in_view(start_point, end_point):
     clickButton(waitForObject(":Basic.Line_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), start_point[0], start_point[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), end_point[0], end_point[1], 0, Qt.LeftButton)
-    
+
 def auxiliary_line_create(start_point, end_point):
     clickButton(waitForObject(":Basic.Line_AppElements_Button"))
     clickButton(waitForObject(":Line.Auxiliary_QCheckBox"))
@@ -77,32 +77,32 @@ def auxiliary_line_create(start_point, end_point):
     type(waitForObject(":End point.Y:_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":End point.Y:_ModuleBase_ParamSpinBox"), end_point[1])
 
-    #clickButton(waitForObject(":Line.property_panel_ok_QToolButton"))  
-    
+    #clickButton(waitForObject(":Line.property_panel_ok_QToolButton"))
+
 def circle_create(x, y, radius):
     clickButton(waitForObject(":Basic.Circle_AppElements_Button"))
-    
+
     type(waitForObject(":Center.X:_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Center.X:_ModuleBase_ParamSpinBox"), x)
     type(waitForObject(":Center.Y:_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Center.Y:_ModuleBase_ParamSpinBox"), y)
-    
+
     type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), radius)
-    
+
     clickButton(waitForObject(":Circle.property_panel_ok_QToolButton"))
-    
+
 def circle_create_in_view(point_1, point_2):
     clickButton(waitForObject(":Basic.Circle_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_2[0], point_2[1], 0, Qt.LeftButton)
-    
+
     clickButton(waitForObject(":Basic.Circle_AppElements_Button"))
 
 def distance_create(point_1, point_2, annotaion_point, distance):
     clickButton(waitForObject(":Constraints.Distance_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_2[0], point_2[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), annotaion_point[0], annotaion_point[1], 0, Qt.LeftButton) # move annotation
@@ -110,80 +110,80 @@ def distance_create(point_1, point_2, annotaion_point, distance):
     type(waitForObject(":_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":_ModuleBase_ParamSpinBox"), distance)
     type(waitForObject(":_ModuleBase_ParamSpinBox"), "<Keypad_Enter>")
-    
-    clickButton(waitForObject(":Constraints.Distance_AppElements_Button"))    
-    
+
+    clickButton(waitForObject(":Constraints.Distance_AppElements_Button"))
+
 def parallel_create(point_1, point_2):
     clickButton(waitForObject(":Constraints.Parallel_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_2[0], point_2[1], 0, Qt.LeftButton)
-    
+
     clickButton(waitForObject(":Constraints.Parallel_AppElements_Button"))
-    
+
 def perpendicular_create(point_1, point_2):
     clickButton(waitForObject(":Constraints.Perpendicular_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_2[0], point_2[1], 0, Qt.LeftButton)
-    
+
     clickButton(waitForObject(":Perpendicular.property_panel_cancel_QToolButton"))
-    
+
 def horizontal_create(point_1):
     clickButton(waitForObject(":Constraints.Horizontal_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
-    
+
     clickButton(waitForObject(":Constraints.Horizontal_AppElements_Button"))
 
 def vertical_create(point_1):
     cclickButton(waitForObject(":Constraints.Vertical_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
-    
+
     clickButton(waitForObject(":Constraints.Vertical_AppElements_Button"))
-        
+
 def radius_create(point_1, point_2, radius):
     clickButton(waitForObject(":Constraints.Radius_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_1[0], point_1[1], 0, Qt.LeftButton)
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point_2[0], point_2[1], 0, Qt.LeftButton)
     type(waitForObject(":_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":_ModuleBase_ParamSpinBox"), radius)
     type(waitForObject(":_ModuleBase_ParamSpinBox"), "<Keypad_Enter>")
-    
+
     clickButton(waitForObject(":Constraints.Radius_AppElements_Button"))
 
 def part_create():
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Part")
     clickButton(waitForObject(":Operations.New part_AppElements_Button"))
-    
+
 def extrusion_feature(points, to_size=0, from_size=0):
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Features")
-    clickButton(waitForObject(":Extrusion.Extrusion_AppElements_Button"))    
+    clickButton(waitForObject(":Extrusion.Extrusion_AppElements_Button"))
 
     mouseClick(waitForObject(":Extrusion.Select a sketch face_QListWidget"), 10, 10, 0, Qt.LeftButton)
     for point in points:
         mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point[0], point[1], 0, Qt.LeftButton)
-    
+
     type(waitForObject(":to_size_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":to_size_ModuleBase_ParamSpinBox"), to_size)
-    
+
     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox"), from_size)
-    
+
     clickButton(waitForObject(":Extrusion.property_panel_ok_QToolButton"))
 
 def extrusion_cut_by_sizes_feature(point, actions, to_size, from_size):
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Features")
     clickButton(waitForObject(":Extrusion.ExtrusionCut_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point[0], point[1], 0, Qt.LeftButton)
-    
+
     actions()
-    
+
     clickButton(waitForObject(":Sketch.Ok_QToolButton"))
-      
+
     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox"), to_size)
 
@@ -192,25 +192,25 @@ def extrusion_cut_by_sizes_feature(point, actions, to_size, from_size):
 
     clickButton(waitForObject(":ExtrusionCut.property_panel_ok_QToolButton"))
     #clickButton(waitForObject(":Sketch.property_panel_cancel_QToolButton"))
-    
-def extrusion_fuse_by_sizes_feature(point, actions, to_size, from_size):  
-      
+
+def extrusion_fuse_by_sizes_feature(point, actions, to_size, from_size):
+
     clickTab(waitForObject(":General.qt_tabwidget_tabbar_QTabBar"), "Features")
     clickButton(waitForObject(":Extrusion.ExtrusionFuse_AppElements_Button"))
-    
+
     mouseClick(waitForObject(":OpenParts*_AppElements_ViewPort"), point[0], point[1], 0, Qt.LeftButton)
-    
+
     actions()
-    
+
     clickButton(waitForObject(":Sketch.Ok_QToolButton"))
-            
+
     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), to_size)
 
     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_3"), "<Ctrl+A>")
     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_3"), from_size)
-    
+
     clickButton(waitForObject(":ExtrusionFuse.property_panel_ok_QToolButton"))
     #clickButton(waitForObject(":Sketch.property_panel_cancel_QToolButton"))
-    
-    
+
+