def main():
- #[project] NewGEOM
- #[Scenario] Revolution_005
- #[Topic] 'RevolutionFuse by planes and offsets' functionality
- #[Tested functionality]
- #[Summary description]
- #[Expected results]
- #[General comments]
-
+ # [project] SHAPER
+ # [Scenario] Revolution_005
+ # [Topic] 'RevolutionFuse by planes and offsets' functionality
+ # [Tested functionality]
+ # [Summary description]
+ # [Expected results]
+ # [General comments]
+
source(findFile("scripts", "common.py"))
-
- #[section] Application start
- #[step] Launch SALOME
+
+ # [section] Application start
+ # [step] Launch SALOME
startApplication("salome_run.sh")
set_defaults()
-
- #[step] Open 'for_revolution_005.hdf'
+
+ # [step] Open 'for_revolution_005.hdf'
open(DATA_PATH + "/for_revolution_005.hdf")
-
- #[step] Activate NewGeom
- clickButton(waitForObject(":SALOME*.NewGeom_QToolButton"))
-
+
+ # [step] Activate SHAPER
+ clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
+
# [step] Activate Part_1
waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)")
clickItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)", 71, 10, 0, Qt.LeftButton)
openItemContextMenu(waitForObject(":Object browser_XGUI_DataTree"), "Part\\_1 (Not loaded)", 70, 9, 0)
activateItem(waitForObjectItem(":_QMenu", "Activate"))
-
- #[step] Fit all
+
+ # [step] Fit all [vp INIT]
fit_all()
-
- #[step] Execute RevolutionFuse operation
+ test.vp("INIT")
+
+ # [step] Execute RevolutionFuse operation
mouseClick(waitForObjectItem(":SALOME*_QMenuBar", "Features"))
mouseClick(waitForObjectItem(":_QMenu", "RevolutionFuse"))
-
- #[step] Select sketch face
+
+ # [step] Select sketch face
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 287, 236, 0, Qt.LeftButton)
-
- # [step] Create 2 circles
- circle_create_in_view((523, 154), (539, 168))
- circle_create_in_view((528, 340), (537, 351))
-
- #[step] Approve sketching
+
+ # [step] Click "Set plane view" in property panel [vp PLANE]
+ clickButton(waitForObject(":Sketcher plane.Set plane view_QPushButton"))
+ test.vp("PLANE")
+
+ # [step] Create 2 circles on the plane [vp CIRCLES]
+ activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
+ activateItem(waitForObjectItem(":Sketch_QMenu", "Circle"))
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 400, 340, 0, Qt.LeftButton)
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 400, 370, 0, Qt.LeftButton)
+ clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
+
+ activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
+ activateItem(waitForObjectItem(":Sketch_QMenu", "Circle"))
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 400, 130, 0, Qt.LeftButton)
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 400, 150, 0, Qt.LeftButton)
+ clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
+
+ test.vp("CIRCLES")
+
+ # [step] Approve sketching
clickButton(waitForObject(":Sketch.property_panel_ok_QToolButton"))
-
- #[step] Select axis for revolution
- mouseClick(waitForObject(":Revolution_QLineEdit_2"), 128, 12, 0, Qt.LeftButton)
- mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 652, 257, 0, Qt.LeftButton)
-
- #[step] Rotate the model
- clickButton(waitForObject(":Revolution_QToolButton_3"))
- type(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), "<Control>")
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 456, 470, -61, -138, 67108866, Qt.RightButton)
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 497, 341, -56, -2, 67108868, Qt.MidButton)
-
- #[step] Fit all
+
+ # [step] Select axis for revolution
+ mouseClick(waitForObject(":Revolution_QLineEdit_2"), 10, 10, 0, Qt.LeftButton)
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 651, 219, 0, Qt.LeftButton)
+
+ # [step] Click 'Reset view' toolbar button [vp RESET]
+ clickButton(waitForObject(":SALOME*.Reset_QToolButton_2"))
+ mouseClick(waitForObject(":SALOME*_OCCViewer_ViewPort3d"), 10, 450, 0, Qt.LeftButton) # close tool bar extension bar
+
fit_all()
+ test.vp("RESET")
- # [step] Select face 'To'
- mouseClick(waitForObject(":To_QLineEdit_3"), 30, 8, 0, Qt.LeftButton)
+ # [step] Select revolution method 'By planes'
snooze(1)
- sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonPress, 694, 187, Qt.LeftButton, 1, 0)
- sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonRelease, 694, 187, Qt.LeftButton, 0, 0)
+ clickButton(waitForObject(":Revolution_QToolButton_3"))
- #[step] Fit all
+ # [step] Select face 'To' (biggest one)
+ mouseClick(waitForObject(":To_QLineEdit_3"), 56, 5, 0, Qt.LeftButton)
+ mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 209, 30, 0, Qt.LeftButton)
+
+ # [step] Fit all
+
+ # [check] Check that preview is updated [vp PLANE_TO]
fit_all()
-
- #[check] Check that preview is updated
- test.vp("VP1")
-
- #[step] Define offset for face 'To'
- mouseClick(waitForObject(":Revolution.qt_spinbox_lineedit_QLineEdit_3"), 34, 9, 0, Qt.LeftButton)
+ test.vp("PLANE_TO")
+
+ # [step] Define offset for face 'To'
+ mouseClick(waitForObject(":Revolution.qt_spinbox_lineedit_QLineEdit_3"), 10, 10, 0, Qt.LeftButton)
type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox_3"), "<Ctrl+A>")
type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox_3"), 30)
+ type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox_3"), "<Return>")
- #[step] Fit all
+ # [check] Check that preview is updated [vp PLANE_TO]
fit_all()
-
- #[check] Check that preview is updated
- test.vp("VP2")
-
- #[step] Select face 'From'
- mouseClick(waitForObject(":From_QLineEdit_3"), 28, 11, 0, Qt.LeftButton)
-
- #[step] Click '-OX' button
- clickButton(waitForObject(":SALOME*.-OX_QToolButton"))
- sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonPress, 441, 217, Qt.LeftButton, 1, 0)
- sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonRelease, 441, 217, Qt.LeftButton, 0, 0)
-
- #[step] Rotate the model
- type(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), "<Control>")
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 576, 380, -99, -156, 67108866, Qt.RightButton)
-
- #[step] Fit all
+ test.vp("PLANE_TO_30")
+
+ # [step] Select face 'From' (smallest one)
+
+ mouseClick(waitForObject(":From_QLineEdit_3"), 32, 10, 0, Qt.LeftButton)
+ sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonPress, 518, 361, Qt.LeftButton, 1, 0)
+ sendEvent("QMouseEvent", waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), QEvent.MouseButtonRelease, 518, 361, Qt.LeftButton, 0, 0)
+
+ # [check] Check that preview is updated [vp PLANE_FROM]
fit_all()
-
- #[check] Check that preview is updated
- test.vp("VP3")
-
- #[step] Define offset for face 'From'
+ test.vp("PLANE_FROM")
+
+ # [step] Define offset for face 'From'
mouseClick(waitForObject(":Revolution.qt_spinbox_lineedit_QLineEdit_4"), 38, 4, 0, Qt.LeftButton)
type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox_3"), "<Ctrl+A>")
type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox_3"), 45)
+ type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox_3"), "<Return>")
- #[check] Check that preview is updated
- test.vp("VP4")
-
- #[step] Approve sketching
+ # [check] Check that preview is updated [vp PLANE_FROM_45]
+ fit_all()
+ test.vp("PLANE_FROM_45")
+
+ # [step] Apply the feature
clickButton(waitForObject(":RevolutionFuse.property_panel_ok_QToolButton"))
-
- #[step] Rotate the model
- type(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), "<Control>")
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 103, 388, 309, -313, 67108866, Qt.RightButton)
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 512, 266, -75, 52, 67108866, Qt.RightButton)
- mouseDrag(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 555, 60, 33, 113, 67108868, Qt.MidButton)
- clickButton(waitForObject(":SALOME*.Fit All_QToolButton"))
-
- #[step] Fit all
+
+ # [step] Fit all
fit_all()
+ test.vp("REVOLUTION_FUSE")
# [step] Close application without saving
close_application()
